test/bmx280: New integration to generic BMX280 sensors tests

tests/driver_bme280/main.c → tests/driver_bmx280/main.c

@@ -30,12 +30,17 @@
 #include "embUnit.h"
 
 bmx280_t bme280;
+#if (MODULE_BME280_I2C) || (MODULE_BME_280_SPI)
+char sensor_id = 'E';
+#else
+char sensor_id = 'P';
+#endif
 
 static const bmx280_params_t default_bme280_params[] = {
     {.i2c_dev = I2C_DEV(0), .i2c_addr = 0x76, BMX280_PARAM_MISC},
 };
 
-void bme280_init(void) {
+void bmx280_init_test(void) {
     // It should be initialized
     int error = bmx280_init(&bme280, &default_bme280_params[0]);
 
@@ -44,10 +49,10 @@ void bme280_init(void) {
         printf("[Error] Something went wrong when using the I2C bus\n");
         break;
     case BMX280_ERR_NODEV:
-        printf("[Error] Unable to communicate with the BME280 device\n");
+        printf("[Error] Unable to communicate with the BM%c280 device\n", sensor_id);
         break;
     case BMX280_OK:
-        printf("BME280 - Initialized\n");
+        printf("BM%c280 - Initialized\n", sensor_id);
         break;
     default:
         printf("[Error] This should never happen\n");
@@ -56,29 +61,30 @@ void bme280_init(void) {
     TEST_ASSERT_EQUAL_INT(0, error);
 }
 
-void bme280_get_temperature(void) {
+void bmx280_get_temperature(void) {
     // It should be able to read temperature
     int16_t temperature = bmx280_read_temperature(&bme280);
 
     char str_temperature[8];
     size_t len = fmt_s16_dfp(str_temperature, temperature, -2);
     str_temperature[len] = '\0';
-    printf("BME280 - Temperature: %s ºC\n", str_temperature);
+    printf("BM%c280 - Temperature: %s ºC\n", sensor_id, str_temperature);
 
     // It should be greater than -32768
     TEST_ASSERT(temperature > -32768);
 }
 
-void bme280_get_pressure(void) {
+void bmx280_get_pressure(void) {
     // It should be able to read pressure in Pascal [Pa]
     uint32_t pressure = bmx280_read_pressure(&bme280);
 
-    printf("BME280 - Pressure: %" PRIu32 " Pa\n", pressure);
+    printf("BM%c280 - Pressure: %" PRIu32 " Pa\n", sensor_id, pressure);
 
     // It should be less than 4294967295 or 0xFFFFFFFF
     TEST_ASSERT(pressure < 4294967295);
 }
 
+#if (MODULE_BME280_I2C) || (MODULE_BME_280_SPI)
 void bme280_get_humiditty(void) {
     // It should be able to read humidity
     uint16_t humidity = bme280_read_humidity(&bme280);
@@ -91,14 +97,17 @@ void bme280_get_humiditty(void) {
     // It should be greater than zero
     TEST_ASSERT(humidity > 0);
 }
+#endif
 
 Test *test_bme280_driver(void) {
 
-    EMB_UNIT_TESTFIXTURES(fixtures){
-        new_TestFixture(bme280_init),
-        new_TestFixture(bme280_get_temperature),
-        new_TestFixture(bme280_get_pressure),
+    EMB_UNIT_TESTFIXTURES(fixtures) {
+        new_TestFixture(bmx280_init_test),
+        new_TestFixture(bmx280_get_temperature),
+        new_TestFixture(bmx280_get_pressure),
+#if (MODULE_BME280_I2C) || (MODULE_BME_280_SPI)
         new_TestFixture(bme280_get_humiditty),
+#endif
     };
 
     EMB_UNIT_TESTCALLER(test_bme280_driver, NULL, NULL, fixtures);
@@ -108,7 +117,7 @@ Test *test_bme280_driver(void) {
 
 int main(void) {
     printf("\n");
-    printf("Test BME280 driver\n");
+    printf("Test BM%c280 driver\n", sensor_id);
 
     TESTS_START();
     TESTS_RUN(test_bme280_driver());