Update to LTS kernel v5.15.96 via rebase #3

kergoth · 2023-03-01T19:13:38Z

Builds and boots fine, with messages equivalent to the 5.15.71 kernel.

JIRA: SB-21359

[ Upstream commit a410429a3b7e748a9db9f357e71e2e085a21c902 ] To the best of my knowledge this is the same board as the B450M DS3H-CF, but with an added WiFi card. Name obtained using dmidecode, tested with force_load on v6.1.6 Signed-off-by: Kevin Kuriakose <[email protected]> Acked-by: Thomas Weißschuh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit f2b0b5210f67c56a3bcdf92ff665fb285d6e0067 ] When listen() and accept() are called on an x25 socket that connect() succeeds, accept() succeeds immediately. This is because x25_connect() queues the skb to sk->sk_receive_queue, and x25_accept() dequeues it. This creates a child socket with the sk of the parent x25 socket, which can cause confusion. Fix x25_listen() to return -EINVAL if the socket has already been successfully connect()ed to avoid this issue. Signed-off-by: Hyunwoo Kim <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4b069553246f993c4221e382d0d0ae34f5ba730e ] [Why&How] Switching between certain modes that are freesync video modes and those are not freesync video modes result in timing not changing as seen by the monitor due to incorrect timing being driven. The issue is fixed by ensuring that when a non freesync video mode is set, we reset the freesync status on the crtc. Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Alan Liu <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit cc3304052a89ab6ac887ed9224420a27e3d354e1 ] When STM32 DFSDM driver is built as module, no modalias information is available. This prevents module to be loaded by udev. Add MODULE_DEVICE_TABLE() to fill module aliases. Fixes: e2e6771 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support") Signed-off-by: Olivier Moysan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit eb320f76e31dc835b9f57f04af1a2353b13bb7d8 ] With vbus override enabled when in OTG dr_mode, Host<->Peripheral switch now works on SM8550, otherwise the DWC3 seems to be stuck in Host mode only. Fixes: a4333c3 ("usb: dwc3: Add Qualcomm DWC3 glue driver") Reviewed-by: Bryan O'Donoghue <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/20230123-topic-sm8550-upstream-dwc3-qcom-otg-v2-1-2d400e598463@linaro.org Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 921deb9da15851425ccbb6ee409dc2fd8fbdfe6b ] __ffs_ep0_queue_wait executes holding the spinlock of &ffs->ev.waitq.lock and unlocks it after the assignments to usb_request are done. However in the code if the request is already NULL we bail out returning -EINVAL but never unlocked the spinlock. Fix this by adding spin_unlock_irq &ffs->ev.waitq.lock before returning. Fixes: 6a19da111057 ("usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait") Reviewed-by: John Keeping <[email protected]> Signed-off-by: Udipto Goswami <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

… UAF [ Upstream commit 226fae124b2dac217ea5436060d623ff3385bc34 ] After a call to console_unlock() in vcs_read() the vc_data struct can be freed by vc_deallocate(). Because of that, the struct vc_data pointer load must be done at the top of while loop in vcs_read() to avoid a UAF when vcs_size() is called. Syzkaller reported a UAF in vcs_size(). BUG: KASAN: use-after-free in vcs_size (drivers/tty/vt/vc_screen.c:215) Read of size 4 at addr ffff8881137479a8 by task 4a005ed81e27e65/1537 CPU: 0 PID: 1537 Comm: 4a005ed81e27e65 Not tainted 6.2.0-rc5 MentorEmbedded#1 Hardware name: Red Hat KVM, BIOS 1.15.0-2.module Call Trace: <TASK> __asan_report_load4_noabort (mm/kasan/report_generic.c:350) vcs_size (drivers/tty/vt/vc_screen.c:215) vcs_read (drivers/tty/vt/vc_screen.c:415) vfs_read (fs/read_write.c:468 fs/read_write.c:450) ... </TASK> Allocated by task 1191: ... kmalloc_trace (mm/slab_common.c:1069) vc_allocate (./include/linux/slab.h:580 ./include/linux/slab.h:720 drivers/tty/vt/vt.c:1128 drivers/tty/vt/vt.c:1108) con_install (drivers/tty/vt/vt.c:3383) tty_init_dev (drivers/tty/tty_io.c:1301 drivers/tty/tty_io.c:1413 drivers/tty/tty_io.c:1390) tty_open (drivers/tty/tty_io.c:2080 drivers/tty/tty_io.c:2126) chrdev_open (fs/char_dev.c:415) do_dentry_open (fs/open.c:883) vfs_open (fs/open.c:1014) ... Freed by task 1548: ... kfree (mm/slab_common.c:1021) vc_port_destruct (drivers/tty/vt/vt.c:1094) tty_port_destructor (drivers/tty/tty_port.c:296) tty_port_put (drivers/tty/tty_port.c:312) vt_disallocate_all (drivers/tty/vt/vt_ioctl.c:662 (discriminator 2)) vt_ioctl (drivers/tty/vt/vt_ioctl.c:903) tty_ioctl (drivers/tty/tty_io.c:2776) ... The buggy address belongs to the object at ffff888113747800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 424 bytes inside of 1024-byte region [ffff888113747800, ffff888113747c00) The buggy address belongs to the physical page: page:00000000b3fe6c7c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x113740 head:00000000b3fe6c7c order:3 compound_mapcount:0 subpages_mapcount:0 compound_pincount:0 anon flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff) raw: 0017ffffc0010200 ffff888100042dc0 0000000000000000 dead000000000001 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888113747880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888113747900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ffff888113747980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888113747a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888113747a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Disabling lock debugging due to kernel taint Fixes: ac751ef ("console: rename acquire/release_console_sem() to console_lock/unlock()") Reported-by: syzkaller <[email protected]> Suggested-by: Jiri Slaby <[email protected]> Signed-off-by: George Kennedy <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 9c445d2637c938a800fcc8b5f0b10e60c94460c7 ] The Clevo PCX0DX/TUXEDO XP1511, need quirks for the keyboard to not be occasionally unresponsive after resume. Signed-off-by: Werner Sembach <[email protected]> Cc: [email protected] Reviewed-by: Hans de Goede <[email protected]> Reviewed-by: Mattijs Korpershoek <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 2b09d5d364986f724f17001ccfe4126b9b43a0be upstream. blit_x and blit_y are u32, so fbcon currently cannot support fonts larger than 32x32. The 32x32 case also needs shifting an unsigned int, to properly set bit 31, otherwise we get "UBSAN: shift-out-of-bounds in fbcon_set_font", as reported on: http://lore.kernel.org/all/IA1PR07MB98308653E259A6F2CE94A4AFABCE9@IA1PR07MB9830.namprd07.prod.outlook.com Kernel Branch: 6.2.0-rc5-next-20230124 Kernel config: https://drive.google.com/file/d/1F-LszDAizEEH0ZX0HcSR06v5q8FPl2Uv/view?usp=sharing Reproducer: https://drive.google.com/file/d/1mP1jcLBY7vWCNM60OMf-ogw-urQRjNrm/view?usp=sharing Reported-by: Sanan Hasanov <[email protected]> Signed-off-by: Samuel Thibault <[email protected]> Fixes: 2d2699d ("fbcon: font setting should check limitation of driver") Cc: [email protected] Tested-by: Miko Larsson <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 29de68c2b32ce58d64dea496d281e25ad0f551bd upstream. Function radix_tree_insert() returns errors if the node hasn't been initialized and added to the tree. "kfree(node)" and return value "NULL" of node_get() help to avoid using unclear node in other calls. Found by Linux Verification Center (linuxtesting.org) with SVACE. Cc: <[email protected]> # 5.7 Fixes: 0c2204a ("net: qrtr: Migrate nameservice to kernel from userspace") Signed-off-by: Natalia Petrova <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit fe8973a3ad0905cb9ba2d42db42ed51de14737df upstream. With CONFIG_VMAP_STACK=y the stack is allocated from the vmalloc space. Data passed to a hardware or a hypervisor interface that requires V=R can no longer be allocated on the stack. Use kmalloc() to get memory for a diag288 command. Signed-off-by: Alexander Egorenkov <[email protected]> Reviewed-by: Heiko Carstens <[email protected]> Cc: <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 32e40f9506b9e32917eb73154f93037b443124d1 upstream. The DIAG 288 statement consumes an EBCDIC string the address of which is passed in a register. Use a "memory" clobber to tell the compiler that memory is accessed within the inline assembly. Signed-off-by: Alexander Egorenkov <[email protected]> Reviewed-by: Heiko Carstens <[email protected]> Cc: <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 6a28a25d358079b7d0d144689f850aecacf63cba upstream. Same issue as SP513-54N: Headset microphone does not work without ALC255_FIXUP_ACER_MIC_NO_PRESENCE fixup. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211853 Cc: <[email protected]> Signed-off-by: Victor Shyba <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 636ab417a7aec4ee993916e688eb5c5977570836 upstream. UEFI v2.10 introduces version 2 of the memory attributes table, which turns the reserved field into a flags field, but is compatible with version 1 in all other respects. So let's not complain about version 2 if we encounter it. Cc: <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit f7b23d1c35d8b8de1425bdfccaefd01f3b7c9d1c upstream. Return value should be zero for success. This was forgotten for timestamp feature. Verified on RealSense cameras. Fixes: a96cd0f ("iio: accel: hid-sensor-accel-3d: Add timestamp") Signed-off-by: Dmitry Perchanov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit eb50cd5bfdac61627a5026566cf3b90ced7b141c upstream. Return value should be zero for success. This was forgotten for timestamp feature. Verified on RealSense cameras. Fixes: 4648cbd ("iio: hid-sensor-gyro-3d: Add timestamp channel") Signed-off-by: Dmitry Perchanov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit cbd3a0153cd18a2cbef6bf3cf31bb406c3fc9f55 upstream. of_get_parent() will return a device_node pointer with refcount incremented. We need to use of_node_put() on it when done. Add the missing of_node_put() in the error path of berlin2_adc_probe(); Fixes: 70f1937 ("iio: adc: add support for Berlin") Signed-off-by: Xiongfeng Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit f804bd0dc28683a93a60f271aaefb2fc5b0853dd upstream. Some inputs need to be wired up to produce proper measurements, without this change only near zero values are reported. Signed-off-by: Andreas Kemnade <[email protected]> Fixes: 1696f36 ("iio: twl6030-gpadc: TWL6030, TWL6032 GPADC driver") Link: https://lore.kernel.org/r/[email protected] Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 9d61c1820598a5ea474576ed55318a6dadee37ed upstream. When device is in active mode, it fails to set an ACCEL full-scale range(2g/4g/8g) in FXOS8700_XYZ_DATA_CFG. This is not align with the datasheet, but it is a fxos8700 chip behavior. Keep the device in standby mode before setting ACCEL full-scale range into FXOS8700_XYZ_DATA_CFG in chip initialization phase and setting scale phase. Fixes: 84e5ddd ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit a53f945879c0cb9de3a4c05a665f5157884b5208 upstream. ACCEL output data registers contain the X-axis, Y-axis, and Z-axis 14-bit left-justified sample data and MAGN output data registers contain the X-axis, Y-axis, and Z-axis 16-bit sample data. The ACCEL raw register output data should be divided by 4 before sent to userspace. Apply a 2 bits signed right shift to the raw data from ACCEL output data register but keep that from MAGN sensor as the origin. Fixes: 84e5ddd ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 429e1e8ec696e0e7a0742904e3dc2f83b7b23dfb upstream. FXOS8700 is an IMU sensor with ACCEL sensor and MAGN sensor. Sensor type is indexed by corresponding channel type in a switch. IIO_ANGL_VEL channel type mapped to MAGN sensor has caused confusion. Fix the mapping label of "IIO_MAGN" channel type instead of "IIO_ANGL_VEL" channel type to MAGN sensor. Fixes: 84e5ddd ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit c68b44bc7d9b1469774a1c985ee71d2cbc5ebef5 upstream. Because ACCEL and MAGN channels data register base address is swapped the accelerometer and magnetometer channels readback is swapped. Fixes: 84e5ddd ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 78ad6864e9e012cdba7c353d044d21ffcfd5f34b upstream. The absence of a correct offset leads an incorrect ODR mode readback after use a hexadecimal number to mark the value from FXOS8700_CTRL_REG1. Get ODR mode by field mask and FIELD_GET clearly and conveniently. And attach other additional fix for keeping the original code logic and a good readability. Fixes: 84e5ddd ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit eb6d8f8705bc19141bac81d8161461f9e256948a upstream. The absence of correct offset leads a failed initialization ODR mode assignment. Select MAX ODR mode as the initialization ODR mode by field mask and FIELD_PREP. Fixes: 84e5ddd ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit ff5e2cd92ffda9a25ffa2cbdb3a0cf17650172a6 upstream. FXOS8700_CTRL_ODR_MIN is not used but value is probably wrong. Remove it for a good readability. Fixes: 84e5ddd ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 2acd031347f645871959a799238a7caf6803aa18 upstream. +/-1200uT is a MAGN sensor full measurement range. Magnetometer scale is the magnetic sensitivity parameter. It is referenced as 0.1uT according to datasheet and magnetometer channel unit is Gauss in sysfs-bus-iio documentation. Gauss and uTesla unit conversion relationship as follows: 0.1uT = 0.001Gs. Set magnetometer scale and available magnetometer scale as fixed 0.001Gs. Fixes: 84e5ddd ("iio: imu: Add support for the FXOS8700 IMU") Signed-off-by: Carlos Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 3dca1f89ae3455963d7b53245ecf298ea9bae857 ] Don't hold sdw_dev_lock while calling the peripheral driver probe() and remove() callbacks. Holding sdw_dev_lock around the probe() and remove() calls causes a theoretical mutex inversion which lockdep will assert on. During probe() the sdw_dev_lock mutex is taken first and then ASoC/ALSA locks are taken by the probe() implementation. During normal operation ASoC can take its locks and then trigger a runtime resume of the component. The SoundWire resume will then take sdw_dev_lock. This is the reverse order compared to probe(). It's not necessary to hold sdw_dev_lock when calling the probe() and remove(), it is only used to prevent the bus core calling the driver callbacks if there isn't a driver or the driver is removing. All calls to the driver callbacks are guarded by the 'probed' flag. So if sdw_dev_lock is held while setting and clearing the 'probed' flag this is sufficient to guarantee the safety of callback functions. Removing the mutex from around the call to probe() means that it is now possible for a bus event (PING response) to be handled in parallel with the probe(). But sdw_bus_probe() already has handling for this by calling the device update_status() after the probe() has completed. Example lockdep assert: [ 46.098514] ====================================================== [ 46.104736] WARNING: possible circular locking dependency detected [ 46.110961] 6.1.0-rc4-jamerson MentorEmbedded#1 Tainted: G E [ 46.116842] ------------------------------------------------------ [ 46.123063] mpg123/1130 is trying to acquire lock: [ 46.127883] ffff8b445031fb80 (&slave->sdw_dev_lock){+.+.}-{3:3}, at: sdw_update_slave_status+0x26/0x70 [ 46.137225] but task is already holding lock: [ 46.143074] ffffffffc1455310 (&card->pcm_mutex){+.+.}-{3:3}, at: dpcm_fe_dai_open+0x49/0x830 [ 46.151536] which lock already depends on the new lock.[ 46.159732] the existing dependency chain (in reverse order) is: [ 46.167231] -> MentorEmbedded#4 (&card->pcm_mutex){+.+.}-{3:3}: [ 46.173428] __mutex_lock+0x94/0x920 [ 46.177542] snd_soc_dpcm_runtime_update+0x2e/0x100 [ 46.182958] snd_soc_dapm_put_enum_double+0x1c2/0x200 [ 46.188548] snd_ctl_elem_write+0x10c/0x1d0 [ 46.193268] snd_ctl_ioctl+0x126/0x850 [ 46.197556] __x64_sys_ioctl+0x87/0xc0 [ 46.201845] do_syscall_64+0x38/0x90 [ 46.205959] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.211553] -> MentorEmbedded#3 (&card->controls_rwsem){++++}-{3:3}: [ 46.218188] down_write+0x2b/0xd0 [ 46.222038] snd_ctl_add_replace+0x39/0xb0 [ 46.226672] snd_soc_add_controls+0x53/0x80 [ 46.231393] soc_probe_component+0x1e4/0x2a0 [ 46.236202] snd_soc_bind_card+0x51a/0xc80 [ 46.240836] devm_snd_soc_register_card+0x43/0x90 [ 46.246079] mc_probe+0x982/0xfe0 [snd_soc_sof_sdw] [ 46.251500] platform_probe+0x3c/0xa0 [ 46.255700] really_probe+0xde/0x390 [ 46.259814] __driver_probe_device+0x78/0x180 [ 46.264710] driver_probe_device+0x1e/0x90 [ 46.269347] __driver_attach+0x9f/0x1f0 [ 46.273721] bus_for_each_dev+0x78/0xc0 [ 46.278098] bus_add_driver+0x1ac/0x200 [ 46.282473] driver_register+0x8f/0xf0 [ 46.286759] do_one_initcall+0x58/0x310 [ 46.291136] do_init_module+0x4c/0x1f0 [ 46.295422] __do_sys_finit_module+0xb4/0x130 [ 46.300321] do_syscall_64+0x38/0x90 [ 46.304434] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.310027] -> MentorEmbedded#2 (&card->mutex){+.+.}-{3:3}: [ 46.315883] __mutex_lock+0x94/0x920 [ 46.320000] snd_soc_bind_card+0x3e/0xc80 [ 46.324551] devm_snd_soc_register_card+0x43/0x90 [ 46.329798] mc_probe+0x982/0xfe0 [snd_soc_sof_sdw] [ 46.335219] platform_probe+0x3c/0xa0 [ 46.339420] really_probe+0xde/0x390 [ 46.343532] __driver_probe_device+0x78/0x180 [ 46.348430] driver_probe_device+0x1e/0x90 [ 46.353065] __driver_attach+0x9f/0x1f0 [ 46.357437] bus_for_each_dev+0x78/0xc0 [ 46.361812] bus_add_driver+0x1ac/0x200 [ 46.366716] driver_register+0x8f/0xf0 [ 46.371528] do_one_initcall+0x58/0x310 [ 46.376424] do_init_module+0x4c/0x1f0 [ 46.381239] __do_sys_finit_module+0xb4/0x130 [ 46.386665] do_syscall_64+0x38/0x90 [ 46.391299] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.397416] -> MentorEmbedded#1 (client_mutex){+.+.}-{3:3}: [ 46.404307] __mutex_lock+0x94/0x920 [ 46.408941] snd_soc_add_component+0x24/0x2c0 [ 46.414345] devm_snd_soc_register_component+0x54/0xa0 [ 46.420522] cs35l56_common_probe+0x280/0x370 [snd_soc_cs35l56] [ 46.427487] cs35l56_sdw_probe+0xf4/0x170 [snd_soc_cs35l56_sdw] [ 46.434442] sdw_drv_probe+0x80/0x1a0 [ 46.439136] really_probe+0xde/0x390 [ 46.443738] __driver_probe_device+0x78/0x180 [ 46.449120] driver_probe_device+0x1e/0x90 [ 46.454247] __driver_attach+0x9f/0x1f0 [ 46.459106] bus_for_each_dev+0x78/0xc0 [ 46.463971] bus_add_driver+0x1ac/0x200 [ 46.468825] driver_register+0x8f/0xf0 [ 46.473592] do_one_initcall+0x58/0x310 [ 46.478441] do_init_module+0x4c/0x1f0 [ 46.483202] __do_sys_finit_module+0xb4/0x130 [ 46.488572] do_syscall_64+0x38/0x90 [ 46.493158] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.499229] -> #0 (&slave->sdw_dev_lock){+.+.}-{3:3}: [ 46.506737] __lock_acquire+0x1121/0x1df0 [ 46.511765] lock_acquire+0xd5/0x300 [ 46.516360] __mutex_lock+0x94/0x920 [ 46.520949] sdw_update_slave_status+0x26/0x70 [ 46.526409] sdw_clear_slave_status+0xd8/0xe0 [ 46.531783] intel_resume_runtime+0x139/0x2a0 [ 46.537155] __rpm_callback+0x41/0x120 [ 46.541919] rpm_callback+0x5d/0x70 [ 46.546422] rpm_resume+0x531/0x7e0 [ 46.550920] __pm_runtime_resume+0x4a/0x80 [ 46.556024] snd_soc_pcm_component_pm_runtime_get+0x2f/0xc0 [ 46.562611] __soc_pcm_open+0x62/0x520 [ 46.567375] dpcm_be_dai_startup+0x116/0x210 [ 46.572661] dpcm_fe_dai_open+0xf7/0x830 [ 46.577597] snd_pcm_open_substream+0x54a/0x8b0 [ 46.583145] snd_pcm_open.part.0+0xdc/0x200 [ 46.588341] snd_pcm_playback_open+0x51/0x80 [ 46.593625] chrdev_open+0xc0/0x250 [ 46.598129] do_dentry_open+0x15f/0x430 [ 46.602981] path_openat+0x75e/0xa80 [ 46.607575] do_filp_open+0xb2/0x160 [ 46.612162] do_sys_openat2+0x9a/0x160 [ 46.616922] __x64_sys_openat+0x53/0xa0 [ 46.621767] do_syscall_64+0x38/0x90 [ 46.626352] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.632414] other info that might help us debug this:[ 46.641862] Chain exists of: &slave->sdw_dev_lock --> &card->controls_rwsem --> &card->pcm_mutex[ 46.655145] Possible unsafe locking scenario:[ 46.662048] CPU0 CPU1 [ 46.667080] ---- ---- [ 46.672108] lock(&card->pcm_mutex); [ 46.676267] lock(&card->controls_rwsem); [ 46.683382] lock(&card->pcm_mutex); [ 46.690063] lock(&slave->sdw_dev_lock); [ 46.694574] *** DEADLOCK ***[ 46.701942] 2 locks held by mpg123/1130: [ 46.706356] #0: ffff8b4457b22b90 (&pcm->open_mutex){+.+.}-{3:3}, at: snd_pcm_open.part.0+0xc9/0x200 [ 46.715999] MentorEmbedded#1: ffffffffc1455310 (&card->pcm_mutex){+.+.}-{3:3}, at: dpcm_fe_dai_open+0x49/0x830 [ 46.725390] stack backtrace: [ 46.730752] CPU: 0 PID: 1130 Comm: mpg123 Tainted: G E 6.1.0-rc4-jamerson MentorEmbedded#1 [ 46.739703] Hardware name: AAEON UP-WHL01/UP-WHL01, BIOS UPW1AM19 11/10/2020 [ 46.747270] Call Trace: [ 46.750239] <TASK> [ 46.752857] dump_stack_lvl+0x56/0x73 [ 46.757045] check_noncircular+0x102/0x120 [ 46.761664] __lock_acquire+0x1121/0x1df0 [ 46.766197] lock_acquire+0xd5/0x300 [ 46.770292] ? sdw_update_slave_status+0x26/0x70 [ 46.775432] ? lock_is_held_type+0xe2/0x140 [ 46.780143] __mutex_lock+0x94/0x920 [ 46.784241] ? sdw_update_slave_status+0x26/0x70 [ 46.789387] ? find_held_lock+0x2b/0x80 [ 46.793750] ? sdw_update_slave_status+0x26/0x70 [ 46.798894] ? lock_release+0x147/0x2f0 [ 46.803262] ? lockdep_init_map_type+0x47/0x250 [ 46.808315] ? sdw_update_slave_status+0x26/0x70 [ 46.813456] sdw_update_slave_status+0x26/0x70 [ 46.818422] sdw_clear_slave_status+0xd8/0xe0 [ 46.823302] ? pm_generic_runtime_suspend+0x30/0x30 [ 46.828706] intel_resume_runtime+0x139/0x2a0 [ 46.833583] ? _raw_spin_unlock_irq+0x24/0x50 [ 46.838462] ? pm_generic_runtime_suspend+0x30/0x30 [ 46.843866] __rpm_callback+0x41/0x120 [ 46.848142] ? pm_generic_runtime_suspend+0x30/0x30 [ 46.853550] rpm_callback+0x5d/0x70 [ 46.857568] rpm_resume+0x531/0x7e0 [ 46.861578] ? _raw_spin_lock_irqsave+0x62/0x70 [ 46.866634] __pm_runtime_resume+0x4a/0x80 [ 46.871258] snd_soc_pcm_component_pm_runtime_get+0x2f/0xc0 [ 46.877358] __soc_pcm_open+0x62/0x520 [ 46.881634] ? dpcm_add_paths.isra.0+0x35d/0x4c0 [ 46.886784] dpcm_be_dai_startup+0x116/0x210 [ 46.891592] dpcm_fe_dai_open+0xf7/0x830 [ 46.896046] ? debug_mutex_init+0x33/0x50 [ 46.900591] snd_pcm_open_substream+0x54a/0x8b0 [ 46.905658] snd_pcm_open.part.0+0xdc/0x200 [ 46.910376] ? wake_up_q+0x90/0x90 [ 46.914312] snd_pcm_playback_open+0x51/0x80 [ 46.919118] chrdev_open+0xc0/0x250 [ 46.923147] ? cdev_device_add+0x90/0x90 [ 46.927608] do_dentry_open+0x15f/0x430 [ 46.931976] path_openat+0x75e/0xa80 [ 46.936086] do_filp_open+0xb2/0x160 [ 46.940194] ? lock_release+0x147/0x2f0 [ 46.944563] ? _raw_spin_unlock+0x29/0x50 [ 46.949101] do_sys_openat2+0x9a/0x160 [ 46.953377] __x64_sys_openat+0x53/0xa0 [ 46.957733] do_syscall_64+0x38/0x90 [ 46.961829] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.967402] RIP: 0033:0x7fa6397ccd3b [ 46.971506] Code: 25 00 00 41 00 3d 00 00 41 00 74 4b 64 8b 04 25 18 00 00 00 85 c0 75 67 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 91 00 00 00 48 8b 4c 24 28 64 48 33 0c 25 [ 46.991413] RSP: 002b:00007fff838e8990 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 [ 46.999580] RAX: ffffffffffffffda RBX: 0000000000080802 RCX: 00007fa6397ccd3b [ 47.007311] RDX: 0000000000080802 RSI: 00007fff838e8b50 RDI: 00000000ffffff9c [ 47.015047] RBP: 00007fff838e8b50 R08: 0000000000000000 R09: 0000000000000011 [ 47.022787] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000080802 [ 47.030539] R13: 0000000000000004 R14: 0000000000000000 R15: 00007fff838e8b50 [ 47.038289] </TASK> Signed-off-by: Richard Fitzgerald <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 13085e1b5cab8ad802904d72e6a6dae85ae0cd20 ] The following LOCKDEP was detected: Workqueue: events smc_lgr_free_work [smc] WARNING: possible circular locking dependency detected 6.1.0-20221027.rc2.git8.56bc5b569087.300.fc36.s390x+debug MentorEmbedded#1 Not tainted ------------------------------------------------------ kworker/3:0/176251 is trying to acquire lock: 00000000f1467148 ((wq_completion)smc_tx_wq-00000000#2){+.+.}-{0:0}, at: __flush_workqueue+0x7a/0x4f0 but task is already holding lock: 0000037fffe97dc8 ((work_completion)(&(&lgr->free_work)->work)){+.+.}-{0:0}, at: process_one_work+0x232/0x730 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> MentorEmbedded#4 ((work_completion)(&(&lgr->free_work)->work)){+.+.}-{0:0}: __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 __flush_work+0x76/0xf0 __cancel_work_timer+0x170/0x220 __smc_lgr_terminate.part.0+0x34/0x1c0 [smc] smc_connect_rdma+0x15e/0x418 [smc] __smc_connect+0x234/0x480 [smc] smc_connect+0x1d6/0x230 [smc] __sys_connect+0x90/0xc0 __do_sys_socketcall+0x186/0x370 __do_syscall+0x1da/0x208 system_call+0x82/0xb0 -> MentorEmbedded#3 (smc_client_lgr_pending){+.+.}-{3:3}: __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 __mutex_lock+0x96/0x8e8 mutex_lock_nested+0x32/0x40 smc_connect_rdma+0xa4/0x418 [smc] __smc_connect+0x234/0x480 [smc] smc_connect+0x1d6/0x230 [smc] __sys_connect+0x90/0xc0 __do_sys_socketcall+0x186/0x370 __do_syscall+0x1da/0x208 system_call+0x82/0xb0 -> MentorEmbedded#2 (sk_lock-AF_SMC){+.+.}-{0:0}: __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 lock_sock_nested+0x46/0xa8 smc_tx_work+0x34/0x50 [smc] process_one_work+0x30c/0x730 worker_thread+0x62/0x420 kthread+0x138/0x150 __ret_from_fork+0x3c/0x58 ret_from_fork+0xa/0x40 -> MentorEmbedded#1 ((work_completion)(&(&smc->conn.tx_work)->work)){+.+.}-{0:0}: __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 process_one_work+0x2bc/0x730 worker_thread+0x62/0x420 kthread+0x138/0x150 __ret_from_fork+0x3c/0x58 ret_from_fork+0xa/0x40 -> #0 ((wq_completion)smc_tx_wq-00000000#2){+.+.}-{0:0}: check_prev_add+0xd8/0xe88 validate_chain+0x70c/0xb20 __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 __flush_workqueue+0xaa/0x4f0 drain_workqueue+0xaa/0x158 destroy_workqueue+0x44/0x2d8 smc_lgr_free+0x9e/0xf8 [smc] process_one_work+0x30c/0x730 worker_thread+0x62/0x420 kthread+0x138/0x150 __ret_from_fork+0x3c/0x58 ret_from_fork+0xa/0x40 other info that might help us debug this: Chain exists of: (wq_completion)smc_tx_wq-00000000#2 --> smc_client_lgr_pending --> (work_completion)(&(&lgr->free_work)->work) Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((work_completion)(&(&lgr->free_work)->work)); lock(smc_client_lgr_pending); lock((work_completion) (&(&lgr->free_work)->work)); lock((wq_completion)smc_tx_wq-00000000#2); *** DEADLOCK *** 2 locks held by kworker/3:0/176251: #0: 0000000080183548 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x232/0x730 MentorEmbedded#1: 0000037fffe97dc8 ((work_completion) (&(&lgr->free_work)->work)){+.+.}-{0:0}, at: process_one_work+0x232/0x730 stack backtrace: CPU: 3 PID: 176251 Comm: kworker/3:0 Not tainted Hardware name: IBM 8561 T01 701 (z/VM 7.2.0) Call Trace: [<000000002983c3e4>] dump_stack_lvl+0xac/0x100 [<0000000028b477ae>] check_noncircular+0x13e/0x160 [<0000000028b48808>] check_prev_add+0xd8/0xe88 [<0000000028b49cc4>] validate_chain+0x70c/0xb20 [<0000000028b4bd26>] __lock_acquire+0x58e/0xbd8 [<0000000028b4cf6a>] lock_acquire.part.0+0xe2/0x248 [<0000000028b4d17c>] lock_acquire+0xac/0x1c8 [<0000000028addaaa>] __flush_workqueue+0xaa/0x4f0 [<0000000028addf9a>] drain_workqueue+0xaa/0x158 [<0000000028ae303c>] destroy_workqueue+0x44/0x2d8 [<000003ff8029af26>] smc_lgr_free+0x9e/0xf8 [smc] [<0000000028adf3d4>] process_one_work+0x30c/0x730 [<0000000028adf85a>] worker_thread+0x62/0x420 [<0000000028aeac50>] kthread+0x138/0x150 [<0000000028a63914>] __ret_from_fork+0x3c/0x58 [<00000000298503da>] ret_from_fork+0xa/0x40 INFO: lockdep is turned off. =================================================================== This deadlock occurs because cancel_delayed_work_sync() waits for the work(&lgr->free_work) to finish, while the &lgr->free_work waits for the work(lgr->tx_wq), which needs the sk_lock-AF_SMC, that is already used under the mutex_lock. The solution is to use cancel_delayed_work() instead, which kills off a pending work. Fixes: a52bcc9 ("net/smc: improve termination processing") Signed-off-by: Wenjia Zhang <[email protected]> Reviewed-by: Jan Karcher <[email protected]> Reviewed-by: Karsten Graul <[email protected]> Reviewed-by: Tony Lu <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 2b4cc3d3f4d8ec42961e98568a0afeee96a943ab ] The check introduced in the commit a5fd39464a40 ("igc: Lift TAPRIO schedule restriction") can detect a false positive error in some corner case. For instance, tc qdisc replace ... taprio num_tc 4 ... sched-entry S 0x01 100000 # slot#1 sched-entry S 0x03 100000 # slot#2 sched-entry S 0x04 100000 # slot#3 sched-entry S 0x08 200000 # slot#4 flags 0x02 # hardware offload Here the queue#0 (the first queue) is on at the slot#1 and MentorEmbedded#2, and off at the slot#3 and MentorEmbedded#4. Under the current logic, when the slot#4 is examined, validate_schedule() returns *false* since the enablement count for the queue#0 is two and it is already off at the previous slot (i.e. MentorEmbedded#3). But this definition is truely correct. Let's fix the logic to enforce a strict validation for consecutively-opened slots. Fixes: a5fd39464a40 ("igc: Lift TAPRIO schedule restriction") Signed-off-by: AKASHI Takahiro <[email protected]> Reviewed-by: Kurt Kanzenbach <[email protected]> Acked-by: Vinicius Costa Gomes <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4e264be98b88a6d6f476c11087fe865696e8bef5 ] When a system with E810 with existing VFs gets rebooted the following hang may be observed. Pid 1 is hung in iavf_remove(), part of a network driver: PID: 1 TASK: ffff965400e5a340 CPU: 24 COMMAND: "systemd-shutdow" #0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb MentorEmbedded#1 [ffffaad04005fae8] schedule at ffffffff8b323e2d MentorEmbedded#2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc MentorEmbedded#3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930 MentorEmbedded#4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf] MentorEmbedded#5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513 MentorEmbedded#6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa MentorEmbedded#7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc MentorEmbedded#8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e MentorEmbedded#9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429 MentorEmbedded#10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4 #11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice] #12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice] #13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice] #14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1 #15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386 #16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870 #17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6 #18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159 #19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc #20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d #21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169 #22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b RIP: 00007f1baa5c13d7 RSP: 00007fffbcc55a98 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1baa5c13d7 RDX: 0000000001234567 RSI: 0000000028121969 RDI: 00000000fee1dead RBP: 00007fffbcc55ca0 R8: 0000000000000000 R9: 00007fffbcc54e90 R10: 00007fffbcc55050 R11: 0000000000000202 R12: 0000000000000005 R13: 0000000000000000 R14: 00007fffbcc55af0 R15: 0000000000000000 ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b During reboot all drivers PM shutdown callbacks are invoked. In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE. In ice_shutdown() the call chain above is executed, which at some point calls iavf_remove(). However iavf_remove() expects the VF to be in one of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If that's not the case it sleeps forever. So if iavf_shutdown() gets invoked before iavf_remove() the system will hang indefinitely because the adapter is already in state __IAVF_REMOVE. Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE, as we already went through iavf_shutdown(). Fixes: 974578017fc1 ("iavf: Add waiting so the port is initialized in remove") Fixes: a8417330f8a5 ("iavf: Fix race condition between iavf_shutdown and iavf_remove") Reported-by: Marius Cornea <[email protected]> Signed-off-by: Stefan Assmann <[email protected]> Reviewed-by: Michal Kubiak <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit ca25c00ccbc5f942c63897ed23584cfc66e8ec81 upstream. A failure loading the safexcel driver results in the following warning on boot, because the IRQ affinity has not been correctly cleaned up. Ensure we clean up the affinity and workqueues on a failure to load the driver. crypto-safexcel: probe of f2800000.crypto failed with error -2 ------------[ cut here ]------------ WARNING: CPU: 1 PID: 232 at kernel/irq/manage.c:1913 free_irq+0x300/0x340 Modules linked in: hwmon mdio_i2c crypto_safexcel(+) md5 sha256_generic libsha256 authenc libdes omap_rng rng_core nft_masq nft_nat nft_chain_nat nf_nat nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables libcrc32c nfnetlink fuse autofs4 CPU: 1 PID: 232 Comm: systemd-udevd Tainted: G W 6.1.6-00002-g9d4898824677 MentorEmbedded#3 Hardware name: MikroTik RB5009 (DT) pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : free_irq+0x300/0x340 lr : free_irq+0x2e0/0x340 sp : ffff800008fa3890 x29: ffff800008fa3890 x28: 0000000000000000 x27: 0000000000000000 x26: ffff8000008e6dc0 x25: ffff000009034cac x24: ffff000009034d50 x23: 0000000000000000 x22: 000000000000004a x21: ffff0000093e0d80 x20: ffff000009034c00 x19: ffff00000615fc00 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 000075f5c1584c5e x14: 0000000000000017 x13: 0000000000000000 x12: 0000000000000040 x11: ffff000000579b60 x10: ffff000000579b62 x9 : ffff800008bbe370 x8 : ffff000000579dd0 x7 : 0000000000000000 x6 : ffff000000579e18 x5 : ffff000000579da8 x4 : ffff800008ca0000 x3 : ffff800008ca0188 x2 : 0000000013033204 x1 : ffff000009034c00 x0 : ffff8000087eadf0 Call trace: free_irq+0x300/0x340 devm_irq_release+0x14/0x20 devres_release_all+0xa0/0x100 device_unbind_cleanup+0x14/0x60 really_probe+0x198/0x2d4 __driver_probe_device+0x74/0xdc driver_probe_device+0x3c/0x110 __driver_attach+0x8c/0x190 bus_for_each_dev+0x6c/0xc0 driver_attach+0x20/0x30 bus_add_driver+0x148/0x1fc driver_register+0x74/0x120 __platform_driver_register+0x24/0x30 safexcel_init+0x48/0x1000 [crypto_safexcel] do_one_initcall+0x4c/0x1b0 do_init_module+0x44/0x1cc load_module+0x1724/0x1be4 __do_sys_finit_module+0xbc/0x110 __arm64_sys_finit_module+0x1c/0x24 invoke_syscall+0x44/0x110 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x20/0x80 el0_svc+0x14/0x4c el0t_64_sync_handler+0xb0/0xb4 el0t_64_sync+0x148/0x14c ---[ end trace 0000000000000000 ]--- Fixes: 1b44c5a ("inside-secure - add SafeXcel EIP197 crypto engine driver") Signed-off-by: Jonathan McDowell <[email protected]> Cc: [email protected] Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit cba6cfdc7c3f1516f0d08ddfb24e689af0932573 ] An automated bot told me that there was a potential lockdep problem with regulators. This was on the chromeos-5.15 kernel, but I see nothing that would be different downstream compared to upstream. The bot said: ============================================ WARNING: possible recursive locking detected 5.15.104-lockdep-17461-gc1e499ed6604 MentorEmbedded#1 Not tainted -------------------------------------------- kworker/u16:4/115 is trying to acquire lock: ffffff8083110170 (regulator_ww_class_mutex){+.+.}-{3:3}, at: create_regulator+0x398/0x7ec but task is already holding lock: ffffff808378e170 (regulator_ww_class_mutex){+.+.}-{3:3}, at: ww_mutex_trylock+0x3c/0x7b8 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(regulator_ww_class_mutex); lock(regulator_ww_class_mutex); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u16:4/115: #0: ffffff808006a948 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x520/0x1348 MentorEmbedded#1: ffffffc00e0a7cc0 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x55c/0x1348 MentorEmbedded#2: ffffff80828a2260 (&dev->mutex){....}-{3:3}, at: __device_attach_async_helper+0xd0/0x2a4 MentorEmbedded#3: ffffff808378e170 (regulator_ww_class_mutex){+.+.}-{3:3}, at: ww_mutex_trylock+0x3c/0x7b8 stack backtrace: CPU: 2 PID: 115 Comm: kworker/u16:4 Not tainted 5.15.104-lockdep-17461-gc1e499ed6604 MentorEmbedded#1 9292e52fa83c0e23762b2b3aa1bacf5787a4d5da Hardware name: Google Quackingstick (rev0+) (DT) Workqueue: events_unbound async_run_entry_fn Call trace: dump_backtrace+0x0/0x4ec show_stack+0x34/0x50 dump_stack_lvl+0xdc/0x11c dump_stack+0x1c/0x48 __lock_acquire+0x16d4/0x6c74 lock_acquire+0x208/0x750 __mutex_lock_common+0x11c/0x11f8 ww_mutex_lock+0xc0/0x440 create_regulator+0x398/0x7ec regulator_resolve_supply+0x654/0x7c4 regulator_register_resolve_supply+0x30/0x120 class_for_each_device+0x1b8/0x230 regulator_register+0x17a4/0x1f40 devm_regulator_register+0x60/0xd0 reg_fixed_voltage_probe+0x728/0xaec platform_probe+0x150/0x1c8 really_probe+0x274/0xa20 __driver_probe_device+0x1dc/0x3f4 driver_probe_device+0x78/0x1c0 __device_attach_driver+0x1ac/0x2c8 bus_for_each_drv+0x11c/0x190 __device_attach_async_helper+0x1e4/0x2a4 async_run_entry_fn+0xa0/0x3ac process_one_work+0x638/0x1348 worker_thread+0x4a8/0x9c4 kthread+0x2e4/0x3a0 ret_from_fork+0x10/0x20 The problem was first reported soon after we made many of the regulators probe asynchronously, though nothing I've seen implies that the problems couldn't have also happened even without that. I haven't personally been able to reproduce the lockdep issue, but the issue does look somewhat legitimate. Specifically, it looks like in regulator_resolve_supply() we are holding a "rdev" lock while calling set_supply() -> create_regulator() which grabs the lock of a _different_ "rdev" (the one for our supply). This is not necessarily safe from a lockdep perspective since there is no documented ordering between these two locks. In reality, we should always be locking a regulator before the supplying regulator, so I don't expect there to be any real deadlocks in practice. However, the regulator framework in general doesn't express this to lockdep. Let's fix the issue by simply grabbing the two locks involved in the same way we grab multiple locks elsewhere in the regulator framework: using the "wound/wait" mechanisms. Fixes: eaa7995 ("regulator: core: avoid regulator_resolve_supply() race condition") Signed-off-by: Douglas Anderson <[email protected]> Link: https://lore.kernel.org/r/20230329143317.RFC.v2.2.I30d8e1ca10cfbe5403884cdd192253a2e063eb9e@changeid Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 91d6a468e335571f1e67e046050dea9af5fa4ebe ] gpi_ch_init() doesn't lock the ctrl_lock mutex, so there is no need to unlock it too. Instead the mutex is handled by the function gpi_alloc_chan_resources(), which properly locks and unlocks the mutex. ===================================== WARNING: bad unlock balance detected! 6.3.0-rc5-00253-g99792582ded1-dirty #15 Not tainted ------------------------------------- kworker/u16:0/9 is trying to release lock (&gpii->ctrl_lock) at: [<ffffb99d04e1284c>] gpi_alloc_chan_resources+0x108/0x5bc but there are no more locks to release! other info that might help us debug this: 6 locks held by kworker/u16:0/9: #0: ffff575740010938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x220/0x594 MentorEmbedded#1: ffff80000809bdd0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x220/0x594 MentorEmbedded#2: ffff575740f2a0f8 (&dev->mutex){....}-{3:3}, at: __device_attach+0x38/0x188 MentorEmbedded#3: ffff57574b5570f8 (&dev->mutex){....}-{3:3}, at: __device_attach+0x38/0x188 MentorEmbedded#4: ffffb99d06a2f180 (of_dma_lock){+.+.}-{3:3}, at: of_dma_request_slave_channel+0x138/0x280 MentorEmbedded#5: ffffb99d06a2ee20 (dma_list_mutex){+.+.}-{3:3}, at: dma_get_slave_channel+0x28/0x10c stack backtrace: CPU: 7 PID: 9 Comm: kworker/u16:0 Not tainted 6.3.0-rc5-00253-g99792582ded1-dirty #15 Hardware name: Google Pixel 3 (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0xa0/0xfc show_stack+0x18/0x24 dump_stack_lvl+0x60/0xac dump_stack+0x18/0x24 print_unlock_imbalance_bug+0x130/0x148 lock_release+0x270/0x300 __mutex_unlock_slowpath+0x48/0x2cc mutex_unlock+0x20/0x2c gpi_alloc_chan_resources+0x108/0x5bc dma_chan_get+0x84/0x188 dma_get_slave_channel+0x5c/0x10c gpi_of_dma_xlate+0x110/0x1a0 of_dma_request_slave_channel+0x174/0x280 dma_request_chan+0x3c/0x2d4 geni_i2c_probe+0x544/0x63c platform_probe+0x68/0xc4 really_probe+0x148/0x2ac __driver_probe_device+0x78/0xe0 driver_probe_device+0x3c/0x160 __device_attach_driver+0xb8/0x138 bus_for_each_drv+0x84/0xe0 __device_attach+0x9c/0x188 device_initial_probe+0x14/0x20 bus_probe_device+0xac/0xb0 device_add+0x60c/0x7d8 of_device_add+0x44/0x60 of_platform_device_create_pdata+0x90/0x124 of_platform_bus_create+0x15c/0x3c8 of_platform_populate+0x58/0xf8 devm_of_platform_populate+0x58/0xbc geni_se_probe+0xf0/0x164 platform_probe+0x68/0xc4 really_probe+0x148/0x2ac __driver_probe_device+0x78/0xe0 driver_probe_device+0x3c/0x160 __device_attach_driver+0xb8/0x138 bus_for_each_drv+0x84/0xe0 __device_attach+0x9c/0x188 device_initial_probe+0x14/0x20 bus_probe_device+0xac/0xb0 deferred_probe_work_func+0x8c/0xc8 process_one_work+0x2bc/0x594 worker_thread+0x228/0x438 kthread+0x108/0x10c ret_from_fork+0x10/0x20 Fixes: 5d0c353 ("dmaengine: qcom: Add GPI dma driver") Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 05bb0167c80b8f93c6a4e0451b7da9b96db990c2 ] ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 MentorEmbedded#1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f MentorEmbedded#1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f MentorEmbedded#1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f MentorEmbedded#2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d MentorEmbedded#3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d MentorEmbedded#4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 MentorEmbedded#5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 MentorEmbedded#6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac MentorEmbedded#7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 MentorEmbedded#8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 MentorEmbedded#9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 MentorEmbedded#10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 #11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac #12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d #13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master. Link: acpica/acpica@770653e3 Signed-off-by: Bob Moore <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4f082a7531223a438c757bb20e304f4c941c67a8 ] This combines the overflow and boundary check so that all attribute size will be properly examined while enumerating them. [ 169.181521] BUG: KASAN: slab-out-of-bounds in run_unpack+0x2e3/0x570 [ 169.183161] Read of size 1 at addr ffff8880094b6240 by task mount/247 [ 169.184046] [ 169.184925] CPU: 0 PID: 247 Comm: mount Not tainted 6.0.0-rc7+ MentorEmbedded#3 [ 169.185908] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 169.187066] Call Trace: [ 169.187492] <TASK> [ 169.188049] dump_stack_lvl+0x49/0x63 [ 169.188495] print_report.cold+0xf5/0x689 [ 169.188964] ? run_unpack+0x2e3/0x570 [ 169.189331] kasan_report+0xa7/0x130 [ 169.189714] ? run_unpack+0x2e3/0x570 [ 169.190079] __asan_load1+0x51/0x60 [ 169.190634] run_unpack+0x2e3/0x570 [ 169.191290] ? run_pack+0x840/0x840 [ 169.191569] ? run_lookup_entry+0xb3/0x1f0 [ 169.192443] ? mi_enum_attr+0x20a/0x230 [ 169.192886] run_unpack_ex+0xad/0x3e0 [ 169.193276] ? run_unpack+0x570/0x570 [ 169.193557] ? ni_load_mi+0x80/0x80 [ 169.193889] ? debug_smp_processor_id+0x17/0x20 [ 169.194236] ? mi_init+0x4a/0x70 [ 169.194496] attr_load_runs_vcn+0x166/0x1c0 [ 169.194851] ? attr_data_write_resident+0x250/0x250 [ 169.195188] mi_read+0x133/0x2c0 [ 169.195481] ntfs_iget5+0x277/0x1780 [ 169.196017] ? call_rcu+0x1c7/0x330 [ 169.196392] ? ntfs_get_block_bmap+0x70/0x70 [ 169.196708] ? evict+0x223/0x280 [ 169.197014] ? __kmalloc+0x33/0x540 [ 169.197305] ? wnd_init+0x15b/0x1b0 [ 169.197599] ntfs_fill_super+0x1026/0x1ba0 [ 169.197994] ? put_ntfs+0x1d0/0x1d0 [ 169.198299] ? vsprintf+0x20/0x20 [ 169.198583] ? mutex_unlock+0x81/0xd0 [ 169.198930] ? set_blocksize+0x95/0x150 [ 169.199269] get_tree_bdev+0x232/0x370 [ 169.199750] ? put_ntfs+0x1d0/0x1d0 [ 169.200094] ntfs_fs_get_tree+0x15/0x20 [ 169.200431] vfs_get_tree+0x4c/0x130 [ 169.200714] path_mount+0x654/0xfe0 [ 169.201067] ? putname+0x80/0xa0 [ 169.201358] ? finish_automount+0x2e0/0x2e0 [ 169.201965] ? putname+0x80/0xa0 [ 169.202445] ? kmem_cache_free+0x1c4/0x440 [ 169.203075] ? putname+0x80/0xa0 [ 169.203414] do_mount+0xd6/0xf0 [ 169.203719] ? path_mount+0xfe0/0xfe0 [ 169.203977] ? __kasan_check_write+0x14/0x20 [ 169.204382] __x64_sys_mount+0xca/0x110 [ 169.204711] do_syscall_64+0x3b/0x90 [ 169.205059] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 169.205571] RIP: 0033:0x7f67a80e948a [ 169.206327] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 169.208296] RSP: 002b:00007ffddf020f58 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 [ 169.209253] RAX: ffffffffffffffda RBX: 000055e2547a6060 RCX: 00007f67a80e948a [ 169.209777] RDX: 000055e2547a6260 RSI: 000055e2547a62e0 RDI: 000055e2547aeaf0 [ 169.210342] RBP: 0000000000000000 R08: 000055e2547a6280 R09: 0000000000000020 [ 169.210843] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 000055e2547aeaf0 [ 169.211307] R13: 000055e2547a6260 R14: 0000000000000000 R15: 00000000ffffffff [ 169.211913] </TASK> [ 169.212304] [ 169.212680] Allocated by task 0: [ 169.212963] (stack is not available) [ 169.213200] [ 169.213472] The buggy address belongs to the object at ffff8880094b5e00 [ 169.213472] which belongs to the cache UDP of size 1152 [ 169.214095] The buggy address is located 1088 bytes inside of [ 169.214095] 1152-byte region [ffff8880094b5e00, ffff8880094b6280) [ 169.214639] [ 169.215004] The buggy address belongs to the physical page: [ 169.215766] page:000000002e324c8c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x94b4 [ 169.218412] head:000000002e324c8c order:2 compound_mapcount:0 compound_pincount:0 [ 169.219078] flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) [ 169.220272] raw: 000fffffc0010200 0000000000000000 dead000000000122 ffff888002409b40 [ 169.221006] raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 [ 169.222320] page dumped because: kasan: bad access detected [ 169.222922] [ 169.223119] Memory state around the buggy address: [ 169.224056] ffff8880094b6100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 169.224908] ffff8880094b6180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 169.225677] >ffff8880094b6200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 169.226445] ^ [ 169.227055] ffff8880094b6280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 169.227638] ffff8880094b6300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Signed-off-by: Edward Lo <[email protected]> Signed-off-by: Konstantin Komarov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 614ce6a2ea50068b45339257891e51e639ac9001 upstream. When the dwc3 device is runtime suspended, various required clocks are in disabled state and it is not guaranteed that access to any registers would work. Depending on the SoC glue, a register read could be as benign as returning 0 or be fatal enough to hang the system. In order to prevent such scenarios of fatal errors, make sure to resume dwc3 then allow the function to proceed. Fixes: 72246da ("usb: Introduce DesignWare USB3 DRD Driver") Cc: [email protected] MentorEmbedded#3.2: 30332ee: debugfs: regset32: Add Runtime PM support Signed-off-by: Udipto Goswami <[email protected]> Reviewed-by: Johan Hovold <[email protected]> Tested-by: Johan Hovold <[email protected]> Acked-by: Thinh Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 05bb0167c80b8f93c6a4e0451b7da9b96db990c2 ] ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 MentorEmbedded#1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f MentorEmbedded#1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f MentorEmbedded#1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f MentorEmbedded#2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d MentorEmbedded#3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d MentorEmbedded#4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 MentorEmbedded#5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 MentorEmbedded#6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac MentorEmbedded#7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 MentorEmbedded#8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 MentorEmbedded#9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 MentorEmbedded#10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 #11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac #12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d #13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master. Link: acpica/acpica@770653e3 Signed-off-by: Bob Moore <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4f082a7531223a438c757bb20e304f4c941c67a8 ] This combines the overflow and boundary check so that all attribute size will be properly examined while enumerating them. [ 169.181521] BUG: KASAN: slab-out-of-bounds in run_unpack+0x2e3/0x570 [ 169.183161] Read of size 1 at addr ffff8880094b6240 by task mount/247 [ 169.184046] [ 169.184925] CPU: 0 PID: 247 Comm: mount Not tainted 6.0.0-rc7+ MentorEmbedded#3 [ 169.185908] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 169.187066] Call Trace: [ 169.187492] <TASK> [ 169.188049] dump_stack_lvl+0x49/0x63 [ 169.188495] print_report.cold+0xf5/0x689 [ 169.188964] ? run_unpack+0x2e3/0x570 [ 169.189331] kasan_report+0xa7/0x130 [ 169.189714] ? run_unpack+0x2e3/0x570 [ 169.190079] __asan_load1+0x51/0x60 [ 169.190634] run_unpack+0x2e3/0x570 [ 169.191290] ? run_pack+0x840/0x840 [ 169.191569] ? run_lookup_entry+0xb3/0x1f0 [ 169.192443] ? mi_enum_attr+0x20a/0x230 [ 169.192886] run_unpack_ex+0xad/0x3e0 [ 169.193276] ? run_unpack+0x570/0x570 [ 169.193557] ? ni_load_mi+0x80/0x80 [ 169.193889] ? debug_smp_processor_id+0x17/0x20 [ 169.194236] ? mi_init+0x4a/0x70 [ 169.194496] attr_load_runs_vcn+0x166/0x1c0 [ 169.194851] ? attr_data_write_resident+0x250/0x250 [ 169.195188] mi_read+0x133/0x2c0 [ 169.195481] ntfs_iget5+0x277/0x1780 [ 169.196017] ? call_rcu+0x1c7/0x330 [ 169.196392] ? ntfs_get_block_bmap+0x70/0x70 [ 169.196708] ? evict+0x223/0x280 [ 169.197014] ? __kmalloc+0x33/0x540 [ 169.197305] ? wnd_init+0x15b/0x1b0 [ 169.197599] ntfs_fill_super+0x1026/0x1ba0 [ 169.197994] ? put_ntfs+0x1d0/0x1d0 [ 169.198299] ? vsprintf+0x20/0x20 [ 169.198583] ? mutex_unlock+0x81/0xd0 [ 169.198930] ? set_blocksize+0x95/0x150 [ 169.199269] get_tree_bdev+0x232/0x370 [ 169.199750] ? put_ntfs+0x1d0/0x1d0 [ 169.200094] ntfs_fs_get_tree+0x15/0x20 [ 169.200431] vfs_get_tree+0x4c/0x130 [ 169.200714] path_mount+0x654/0xfe0 [ 169.201067] ? putname+0x80/0xa0 [ 169.201358] ? finish_automount+0x2e0/0x2e0 [ 169.201965] ? putname+0x80/0xa0 [ 169.202445] ? kmem_cache_free+0x1c4/0x440 [ 169.203075] ? putname+0x80/0xa0 [ 169.203414] do_mount+0xd6/0xf0 [ 169.203719] ? path_mount+0xfe0/0xfe0 [ 169.203977] ? __kasan_check_write+0x14/0x20 [ 169.204382] __x64_sys_mount+0xca/0x110 [ 169.204711] do_syscall_64+0x3b/0x90 [ 169.205059] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 169.205571] RIP: 0033:0x7f67a80e948a [ 169.206327] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 169.208296] RSP: 002b:00007ffddf020f58 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 [ 169.209253] RAX: ffffffffffffffda RBX: 000055e2547a6060 RCX: 00007f67a80e948a [ 169.209777] RDX: 000055e2547a6260 RSI: 000055e2547a62e0 RDI: 000055e2547aeaf0 [ 169.210342] RBP: 0000000000000000 R08: 000055e2547a6280 R09: 0000000000000020 [ 169.210843] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 000055e2547aeaf0 [ 169.211307] R13: 000055e2547a6260 R14: 0000000000000000 R15: 00000000ffffffff [ 169.211913] </TASK> [ 169.212304] [ 169.212680] Allocated by task 0: [ 169.212963] (stack is not available) [ 169.213200] [ 169.213472] The buggy address belongs to the object at ffff8880094b5e00 [ 169.213472] which belongs to the cache UDP of size 1152 [ 169.214095] The buggy address is located 1088 bytes inside of [ 169.214095] 1152-byte region [ffff8880094b5e00, ffff8880094b6280) [ 169.214639] [ 169.215004] The buggy address belongs to the physical page: [ 169.215766] page:000000002e324c8c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x94b4 [ 169.218412] head:000000002e324c8c order:2 compound_mapcount:0 compound_pincount:0 [ 169.219078] flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) [ 169.220272] raw: 000fffffc0010200 0000000000000000 dead000000000122 ffff888002409b40 [ 169.221006] raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 [ 169.222320] page dumped because: kasan: bad access detected [ 169.222922] [ 169.223119] Memory state around the buggy address: [ 169.224056] ffff8880094b6100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 169.224908] ffff8880094b6180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 169.225677] >ffff8880094b6200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 169.226445] ^ [ 169.227055] ffff8880094b6280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 169.227638] ffff8880094b6300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Signed-off-by: Edward Lo <[email protected]> Signed-off-by: Konstantin Komarov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 614ce6a2ea50068b45339257891e51e639ac9001 upstream. When the dwc3 device is runtime suspended, various required clocks are in disabled state and it is not guaranteed that access to any registers would work. Depending on the SoC glue, a register read could be as benign as returning 0 or be fatal enough to hang the system. In order to prevent such scenarios of fatal errors, make sure to resume dwc3 then allow the function to proceed. Fixes: 72246da ("usb: Introduce DesignWare USB3 DRD Driver") Cc: [email protected] MentorEmbedded#3.2: 30332ee: debugfs: regset32: Add Runtime PM support Signed-off-by: Udipto Goswami <[email protected]> Reviewed-by: Johan Hovold <[email protected]> Tested-by: Johan Hovold <[email protected]> Acked-by: Thinh Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit b684c09f09e7a6af3794d4233ef785819e72db79 ] ppc_save_regs() skips one stack frame while saving the CPU register states. Instead of saving current R1, it pulls the previous stack frame pointer. When vmcores caused by direct panic call (such as `echo c > /proc/sysrq-trigger`), are debugged with gdb, gdb fails to show the backtrace correctly. On further analysis, it was found that it was because of mismatch between r1 and NIP. GDB uses NIP to get current function symbol and uses corresponding debug info of that function to unwind previous frames, but due to the mismatching r1 and NIP, the unwinding does not work, and it fails to unwind to the 2nd frame and hence does not show the backtrace. GDB backtrace with vmcore of kernel without this patch: --------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=<optimized out>, newregs=0xc000000004f8f8d8) at ./arch/powerpc/include/asm/kexec.h:69 MentorEmbedded#1 __crash_kexec (regs=<optimized out>) at kernel/kexec_core.c:974 MentorEmbedded#2 0x0000000000000063 in ?? () MentorEmbedded#3 0xc000000003579320 in ?? () --------- Further analysis revealed that the mismatch occurred because "ppc_save_regs" was saving the previous stack's SP instead of the current r1. This patch fixes this by storing current r1 in the saved pt_regs. GDB backtrace with vmcore of patched kernel: -------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=0x0, newregs=0xc00000000670b8d8) at ./arch/powerpc/include/asm/kexec.h:69 MentorEmbedded#1 __crash_kexec (regs=regs@entry=0x0) at kernel/kexec_core.c:974 MentorEmbedded#2 0xc000000000168918 in panic (fmt=fmt@entry=0xc000000001654a60 "sysrq triggered crash\n") at kernel/panic.c:358 MentorEmbedded#3 0xc000000000b735f8 in sysrq_handle_crash (key=<optimized out>) at drivers/tty/sysrq.c:155 MentorEmbedded#4 0xc000000000b742cc in __handle_sysrq (key=key@entry=99, check_mask=check_mask@entry=false) at drivers/tty/sysrq.c:602 MentorEmbedded#5 0xc000000000b7506c in write_sysrq_trigger (file=<optimized out>, buf=<optimized out>, count=2, ppos=<optimized out>) at drivers/tty/sysrq.c:1163 MentorEmbedded#6 0xc00000000069a7bc in pde_write (ppos=<optimized out>, count=<optimized out>, buf=<optimized out>, file=<optimized out>, pde=0xc00000000362cb40) at fs/proc/inode.c:340 MentorEmbedded#7 proc_reg_write (file=<optimized out>, buf=<optimized out>, count=<optimized out>, ppos=<optimized out>) at fs/proc/inode.c:352 MentorEmbedded#8 0xc0000000005b3bbc in vfs_write (file=file@entry=0xc000000006aa6b00, buf=buf@entry=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=count@entry=2, pos=pos@entry=0xc00000000670bda0) at fs/read_write.c:582 MentorEmbedded#9 0xc0000000005b4264 in ksys_write (fd=<optimized out>, buf=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=2) at fs/read_write.c:637 MentorEmbedded#10 0xc00000000002ea2c in system_call_exception (regs=0xc00000000670be80, r0=<optimized out>) at arch/powerpc/kernel/syscall.c:171 #11 0xc00000000000c270 in system_call_vectored_common () at arch/powerpc/kernel/interrupt_64.S:192 -------- Nick adds: So this now saves regs as though it was an interrupt taken in the caller, at the instruction after the call to ppc_save_regs, whereas previously the NIP was there, but R1 came from the caller's caller and that mismatch is what causes gdb's dwarf unwinder to go haywire. Signed-off-by: Aditya Gupta <[email protected]> Fixes: d16a58f ("powerpc: Improve ppc_save_regs()") Reivewed-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit e3e82fcb79eeb3f1a88a89f676831773caff514a ] When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 MentorEmbedded#1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 MentorEmbedded#2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f MentorEmbedded#3 [fffffe0000549eb8] do_nmi at ffffffff81079582 MentorEmbedded#4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- MentorEmbedded#5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b MentorEmbedded#6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 MentorEmbedded#7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 MentorEmbedded#8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] MentorEmbedded#9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] MentorEmbedded#10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 #15 [ffff88aa841efb88] device_del at ffffffff82179d23 #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff #20 [ffff88aa841eff10] kthread at ffffffff811d87a0 #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/[email protected] Suggested-by: "Ismail, Mustafa" <[email protected]> Signed-off-by: Shifeng Li <[email protected]> Reviewed-by: Shiraz Saleem <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit dc8289f912387c3bcfbc5d2db29c8947fa207c11 ] When smb1 mount fails, KASAN detect slab-out-of-bounds in init_smb2_rsp_hdr like the following one. For smb1 negotiate(56bytes) , init_smb2_rsp_hdr() for smb2 is called. The issue occurs while handling smb1 negotiate as smb2 server operations. Add smb server operations for smb1 (get_cmd_val, init_rsp_hdr, allocate_rsp_buf, check_user_session) to handle smb1 negotiate so that smb2 server operation does not handle it. [ 411.400423] CIFS: VFS: Use of the less secure dialect vers=1.0 is not recommended unless required for access to very old servers [ 411.400452] CIFS: Attempting to mount \\192.168.45.139\homes [ 411.479312] ksmbd: init_smb2_rsp_hdr : 492 [ 411.479323] ================================================================== [ 411.479327] BUG: KASAN: slab-out-of-bounds in init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd] [ 411.479369] Read of size 16 at addr ffff888488ed0734 by task kworker/14:1/199 [ 411.479379] CPU: 14 PID: 199 Comm: kworker/14:1 Tainted: G OE 6.1.21 MentorEmbedded#3 [ 411.479386] Hardware name: ASUSTeK COMPUTER INC. Z10PA-D8 Series/Z10PA-D8 Series, BIOS 3801 08/23/2019 [ 411.479390] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd] [ 411.479425] Call Trace: [ 411.479428] <TASK> [ 411.479432] dump_stack_lvl+0x49/0x63 [ 411.479444] print_report+0x171/0x4a8 [ 411.479452] ? kasan_complete_mode_report_info+0x3c/0x200 [ 411.479463] ? init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd] [ 411.479497] kasan_report+0xb4/0x130 [ 411.479503] ? init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd] [ 411.479537] kasan_check_range+0x149/0x1e0 [ 411.479543] memcpy+0x24/0x70 [ 411.479550] init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd] [ 411.479585] handle_ksmbd_work+0x109/0x760 [ksmbd] [ 411.479616] ? _raw_spin_unlock_irqrestore+0x50/0x50 [ 411.479624] ? smb3_encrypt_resp+0x340/0x340 [ksmbd] [ 411.479656] process_one_work+0x49c/0x790 [ 411.479667] worker_thread+0x2b1/0x6e0 [ 411.479674] ? process_one_work+0x790/0x790 [ 411.479680] kthread+0x177/0x1b0 [ 411.479686] ? kthread_complete_and_exit+0x30/0x30 [ 411.479692] ret_from_fork+0x22/0x30 [ 411.479702] </TASK> Fixes: 39b291b86b59 ("ksmbd: return unsupported error on smb1 mount") Cc: [email protected] Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 807252f028c59b9a3bac4d62ad84761548c10f11 ] Running smb2.rename test from Samba smbtorture suite against a kernel built with lockdep triggers a "possible recursive locking detected" warning. This is because mnt_want_write() is called twice with no mnt_drop_write() in between: -> ksmbd_vfs_mkdir() -> ksmbd_vfs_kern_path_create() -> kern_path_create() -> filename_create() -> mnt_want_write() -> mnt_want_write() Fix this by removing the mnt_want_write/mnt_drop_write calls from vfs helpers that call kern_path_create(). Full lockdep trace below: ============================================ WARNING: possible recursive locking detected 6.6.0-rc5 #775 Not tainted -------------------------------------------- kworker/1:1/32 is trying to acquire lock: ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: ksmbd_vfs_mkdir+0xe1/0x410 but task is already holding lock: ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: filename_create+0xb6/0x260 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(sb_writers#5); lock(sb_writers#5); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/1:1/32: #0: ffff8880064e4138 ((wq_completion)ksmbd-io){+.+.}-{0:0}, at: process_one_work+0x40e/0x980 MentorEmbedded#1: ffff888005b0fdd0 ((work_completion)(&work->work)){+.+.}-{0:0}, at: process_one_work+0x40e/0x980 MentorEmbedded#2: ffff888005ac83f8 (sb_writers#5){.+.+}-{0:0}, at: filename_create+0xb6/0x260 MentorEmbedded#3: ffff8880057ce760 (&type->i_mutex_dir_key#3/1){+.+.}-{3:3}, at: filename_create+0x123/0x260 Cc: [email protected] Fixes: 40b268d384a2 ("ksmbd: add mnt_want_write to ksmbd vfs functions") Signed-off-by: Marios Makassikis <[email protected]> Acked-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 14694179e561b5f2f7e56a0f590e2cb49a9cc7ab ] Trying to suspend to RAM on SAMA5D27 EVK leads to the following lockdep warning: ============================================ WARNING: possible recursive locking detected 6.7.0-rc5-wt+ #532 Not tainted -------------------------------------------- sh/92 is trying to acquire lock: c3cf306c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 but task is already holding lock: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by sh/92: #0: c3aa0258 (sb_writers#6){.+.+}-{0:0}, at: ksys_write+0xd8/0x178 MentorEmbedded#1: c4c2df44 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x138/0x284 MentorEmbedded#2: c32684a0 (kn->active){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x148/0x284 MentorEmbedded#3: c232b6d4 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x13c/0x4e8 MentorEmbedded#4: c387b088 (&dev->mutex){....}-{3:3}, at: __device_suspend+0x1e8/0x91c MentorEmbedded#5: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 stack backtrace: CPU: 0 PID: 92 Comm: sh Not tainted 6.7.0-rc5-wt+ #532 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x48 dump_stack_lvl from __lock_acquire+0x19ec/0x3a0c __lock_acquire from lock_acquire.part.0+0x124/0x2d0 lock_acquire.part.0 from _raw_spin_lock_irqsave+0x5c/0x78 _raw_spin_lock_irqsave from __irq_get_desc_lock+0xe8/0x100 __irq_get_desc_lock from irq_set_irq_wake+0xa8/0x204 irq_set_irq_wake from atmel_gpio_irq_set_wake+0x58/0xb4 atmel_gpio_irq_set_wake from irq_set_irq_wake+0x100/0x204 irq_set_irq_wake from gpio_keys_suspend+0xec/0x2b8 gpio_keys_suspend from dpm_run_callback+0xe4/0x248 dpm_run_callback from __device_suspend+0x234/0x91c __device_suspend from dpm_suspend+0x224/0x43c dpm_suspend from dpm_suspend_start+0x9c/0xa8 dpm_suspend_start from suspend_devices_and_enter+0x1e0/0xa84 suspend_devices_and_enter from pm_suspend+0x460/0x4e8 pm_suspend from state_store+0x78/0xe4 state_store from kernfs_fop_write_iter+0x1a0/0x284 kernfs_fop_write_iter from vfs_write+0x38c/0x6f4 vfs_write from ksys_write+0xd8/0x178 ksys_write from ret_fast_syscall+0x0/0x1c Exception stack(0xc52b3fa8 to 0xc52b3ff0) 3fa0: 00000004 005a0ae8 00000001 005a0ae8 00000004 00000001 3fc0: 00000004 005a0ae8 00000001 00000004 00000004 b6c616c0 00000020 0059d190 3fe0: 00000004 b6c61678 aec5a041 aebf1a26 This warning is raised because pinctrl-at91-pio4 uses chained IRQ. Whenever a wake up source configures an IRQ through irq_set_irq_wake, it will lock the corresponding IRQ desc, and then call irq_set_irq_wake on "parent" IRQ which will do the same on its own IRQ desc, but since those two locks share the same class, lockdep reports this as an issue. Fix lockdep false positive by setting a different class for parent and children IRQ Fixes: 7761808 ("pinctrl: introduce driver for Atmel PIO4 controller") Signed-off-by: Alexis Lothoré <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit b33fb5b801c6db408b774a68e7c8722796b59ecc ] The variable rmnet_link_ops assign a *bigger* maxtype which leads to a global out-of-bounds read when parsing the netlink attributes. See bug trace below: ================================================================== BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline] BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 Read of size 1 at addr ffffffff92c438d0 by task syz-executor.6/84207 CPU: 0 PID: 84207 Comm: syz-executor.6 Tainted: G N 6.1.0 MentorEmbedded#3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x172/0x475 mm/kasan/report.c:395 kasan_report+0xbb/0x1c0 mm/kasan/report.c:495 validate_nla lib/nlattr.c:386 [inline] __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 __nla_parse+0x3e/0x50 lib/nlattr.c:697 nla_parse_nested_deprecated include/net/netlink.h:1248 [inline] __rtnl_newlink+0x50a/0x1880 net/core/rtnetlink.c:3485 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3594 rtnetlink_rcv_msg+0x43c/0xd70 net/core/rtnetlink.c:6091 netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0x154/0x190 net/socket.c:734 ____sys_sendmsg+0x6df/0x840 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fdcf2072359 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdcf13e3168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fdcf219ff80 RCX: 00007fdcf2072359 RDX: 0000000000000000 RSI: 0000000020000200 RDI: 0000000000000003 RBP: 00007fdcf20bd493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffbb8d7bdf R14: 00007fdcf13e3300 R15: 0000000000022000 </TASK> The buggy address belongs to the variable: rmnet_policy+0x30/0xe0 The buggy address belongs to the physical page: page:0000000065bdeb3c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x155243 flags: 0x200000000001000(reserved|node=0|zone=2) raw: 0200000000001000 ffffea00055490c8 ffffea00055490c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffff92c43780: f9 f9 f9 f9 00 00 00 02 f9 f9 f9 f9 00 00 00 07 ffffffff92c43800: f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 06 f9 f9 f9 >ffffffff92c43880: f9 f9 f9 f9 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 ^ ffffffff92c43900: 00 00 00 00 00 00 00 00 07 f9 f9 f9 f9 f9 f9 f9 ffffffff92c43980: 00 00 00 07 f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 According to the comment of `nla_parse_nested_deprecated`, the maxtype should be len(destination array) - 1. Hence use `IFLA_RMNET_MAX` here. Fixes: 14452ca ("net: qualcomm: rmnet: Export mux_id and flags to netlink") Signed-off-by: Lin Ma <[email protected]> Reviewed-by: Subash Abhinov Kasiviswanathan <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit ebeae8adf89d9a82359f6659b1663d09beec2faa ] Similar to a reported issue (check the commit b33fb5b801c6 ("net: qualcomm: rmnet: fix global oob in rmnet_policy"), my local fuzzer finds another global out-of-bounds read for policy ksmbd_nl_policy. See bug trace below: ================================================================== BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline] BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 Read of size 1 at addr ffffffff8f24b100 by task syz-executor.1/62810 CPU: 0 PID: 62810 Comm: syz-executor.1 Tainted: G N 6.1.0 MentorEmbedded#3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x172/0x475 mm/kasan/report.c:395 kasan_report+0xbb/0x1c0 mm/kasan/report.c:495 validate_nla lib/nlattr.c:386 [inline] __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 __nla_parse+0x3e/0x50 lib/nlattr.c:697 __nlmsg_parse include/net/netlink.h:748 [inline] genl_family_rcv_msg_attrs_parse.constprop.0+0x1b0/0x290 net/netlink/genetlink.c:565 genl_family_rcv_msg_doit+0xda/0x330 net/netlink/genetlink.c:734 genl_family_rcv_msg net/netlink/genetlink.c:833 [inline] genl_rcv_msg+0x441/0x780 net/netlink/genetlink.c:850 netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540 genl_rcv+0x24/0x40 net/netlink/genetlink.c:861 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0x154/0x190 net/socket.c:734 ____sys_sendmsg+0x6df/0x840 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fdd66a8f359 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdd65e00168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fdd66bbcf80 RCX: 00007fdd66a8f359 RDX: 0000000000000000 RSI: 0000000020000500 RDI: 0000000000000003 RBP: 00007fdd66ada493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffc84b81aff R14: 00007fdd65e00300 R15: 0000000000022000 </TASK> The buggy address belongs to the variable: ksmbd_nl_policy+0x100/0xa80 The buggy address belongs to the physical page: page:0000000034f47940 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1ccc4b flags: 0x200000000001000(reserved|node=0|zone=2) raw: 0200000000001000 ffffea00073312c8 ffffea00073312c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffff8f24b000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffff8f24b080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffff8f24b100: f9 f9 f9 f9 00 00 f9 f9 f9 f9 f9 f9 00 00 07 f9 ^ ffffffff8f24b180: f9 f9 f9 f9 00 05 f9 f9 f9 f9 f9 f9 00 00 00 05 ffffffff8f24b200: f9 f9 f9 f9 00 00 03 f9 f9 f9 f9 f9 00 00 04 f9 ================================================================== To fix it, add a placeholder named __KSMBD_EVENT_MAX and let KSMBD_EVENT_MAX to be its original value - 1 according to what other netlink families do. Also change two sites that refer the KSMBD_EVENT_MAX to correct value. Cc: [email protected] Fixes: 0626e66 ("cifsd: add server handler for central processing and tranport layers") Signed-off-by: Lin Ma <[email protected]> Acked-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit fc3a5534e2a8855427403113cbeb54af5837bbe0 ] An issue occurred while reading an ELF file in libbpf.c during fuzzing: Program received signal SIGSEGV, Segmentation fault. 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 4206 in libbpf.c (gdb) bt #0 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 MentorEmbedded#1 0x000000000094f9d6 in bpf_object.collect_relos () at libbpf.c:6706 MentorEmbedded#2 0x000000000092bef3 in bpf_object_open () at libbpf.c:7437 MentorEmbedded#3 0x000000000092c046 in bpf_object.open_mem () at libbpf.c:7497 MentorEmbedded#4 0x0000000000924afa in LLVMFuzzerTestOneInput () at fuzz/bpf-object-fuzzer.c:16 MentorEmbedded#5 0x000000000060be11 in testblitz_engine::fuzzer::Fuzzer::run_one () MentorEmbedded#6 0x000000000087ad92 in tracing::span::Span::in_scope () MentorEmbedded#7 0x00000000006078aa in testblitz_engine::fuzzer::util::walkdir () MentorEmbedded#8 0x00000000005f3217 in testblitz_engine::entrypoint::main::{{closure}} () MentorEmbedded#9 0x00000000005f2601 in main () (gdb) scn_data was null at this code(tools/lib/bpf/src/libbpf.c): if (rel->r_offset % BPF_INSN_SZ || rel->r_offset >= scn_data->d_size) { The scn_data is derived from the code above: scn = elf_sec_by_idx(obj, sec_idx); scn_data = elf_sec_data(obj, scn); relo_sec_name = elf_sec_str(obj, shdr->sh_name); sec_name = elf_sec_name(obj, scn); if (!relo_sec_name || !sec_name)// don't check whether scn_data is NULL return -EINVAL; In certain special scenarios, such as reading a malformed ELF file, it is possible that scn_data may be a null pointer Signed-off-by: Mingyi Zhang <[email protected]> Signed-off-by: Xin Liu <[email protected]> Signed-off-by: Changye Wu <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 346f59d1e8ed0eed41c80e1acb657e484c308e6a ] Many devices with a single alternate setting do not have a Valid Alternate Setting Control and validation performed by validate_sample_rate_table_v2v3() doesn't work on them and is not really needed. So check the presense of control before sending altsetting validation requests. MOTU Microbook IIc is suffering the most without this check. It takes up to 40 seconds to bootup due to how slow it switches sampling rates: [ 2659.164824] usb 3-2: New USB device found, idVendor=07fd, idProduct=0004, bcdDevice= 0.60 [ 2659.164827] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2659.164829] usb 3-2: Product: MicroBook IIc [ 2659.164830] usb 3-2: Manufacturer: MOTU [ 2659.166204] usb 3-2: Found last interface = 3 [ 2679.322298] usb 3-2: No valid sample rate available for 1:1, assuming a firmware bug [ 2679.322306] usb 3-2: 1:1: add audio endpoint 0x3 [ 2679.322321] usb 3-2: Creating new data endpoint MentorEmbedded#3 [ 2679.322552] usb 3-2: 1:1 Set sample rate 96000, clock 1 [ 2684.362250] usb 3-2: 2:1: cannot get freq (v2/v3): err -110 [ 2694.444700] usb 3-2: No valid sample rate available for 2:1, assuming a firmware bug [ 2694.444707] usb 3-2: 2:1: add audio endpoint 0x84 [ 2694.444721] usb 3-2: Creating new data endpoint #84 [ 2699.482103] usb 3-2: 2:1 Set sample rate 96000, clock 1 Signed-off-by: Alexander Tsoy <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit cd45f99034b0c8c9cb346dd0d6407a95ca3d36f6 upstream. ... cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request); list_del_init(&priv_req->list); ... 'priv_req' actually free at cdns3_gadget_ep_free_request(). But list_del_init() use priv_req->list after it. [ 1542.642868][ T534] BUG: KFENCE: use-after-free read in __list_del_entry_valid+0x10/0xd4 [ 1542.642868][ T534] [ 1542.653162][ T534] Use-after-free read at 0x000000009ed0ba99 (in kfence-MentorEmbedded#3): [ 1542.660311][ T534] __list_del_entry_valid+0x10/0xd4 [ 1542.665375][ T534] cdns3_gadget_ep_disable+0x1f8/0x388 [cdns3] [ 1542.671571][ T534] usb_ep_disable+0x44/0xe4 [ 1542.675948][ T534] ffs_func_eps_disable+0x64/0xc8 [ 1542.680839][ T534] ffs_func_set_alt+0x74/0x368 [ 1542.685478][ T534] ffs_func_disable+0x18/0x28 Move list_del_init() before cdns3_gadget_ep_free_request() to resolve this problem. Cc: [email protected] Fixes: 7733f6c ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li <[email protected]> Reviewed-by: Roger Quadros <[email protected]> Acked-by: Peter Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 3d6586008f7b638f91f3332602592caa8b00b559 ] Patch series "mm: follow_pte() improvements and acrn follow_pte() fixes". Patch MentorEmbedded#1 fixes a bunch of issues I spotted in the acrn driver. It compiles, that's all I know. I'll appreciate some review and testing from acrn folks. Patch MentorEmbedded#2+MentorEmbedded#3 improve follow_pte(), passing a VMA instead of the MM, adding more sanity checks, and improving the documentation. Gave it a quick test on x86-64 using VM_PAT that ends up using follow_pte(). This patch (of 3): We currently miss handling various cases, resulting in a dangerous follow_pte() (previously follow_pfn()) usage. (1) We're not checking PTE write permissions. Maybe we should simply always require pte_write() like we do for pin_user_pages_fast(FOLL_WRITE)? Hard to tell, so let's check for ACRN_MEM_ACCESS_WRITE for now. (2) We're not rejecting refcounted pages. As we are not using MMU notifiers, messing with refcounted pages is dangerous and can result in use-after-free. Let's make sure to reject them. (3) We are only looking at the first PTE of a bigger range. We only lookup a single PTE, but memmap->len may span a larger area. Let's loop over all involved PTEs and make sure the PFN range is actually contiguous. Reject everything else: it couldn't have worked either way, and rather made use access PFNs we shouldn't be accessing. Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: 8a6e85f75a83 ("virt: acrn: obtain pa from VMA with PFNMAP flag") Signed-off-by: David Hildenbrand <[email protected]> Cc: Alex Williamson <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Fei Li <[email protected]> Cc: Gerald Schaefer <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Yonghua Huang <[email protected]> Cc: Sean Christopherson <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 22f00812862564b314784167a89f27b444f82a46 upstream. The syzbot fuzzer found that the interrupt-URB completion callback in the cdc-wdm driver was taking too long, and the driver's immediate resubmission of interrupt URBs with -EPROTO status combined with the dummy-hcd emulation to cause a CPU lockup: cdc_wdm 1-1:1.0: nonzero urb status received: -71 cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625] CPU#0 Utilization every 4s during lockup: MentorEmbedded#1: 98% system, 0% softirq, 3% hardirq, 0% idle MentorEmbedded#2: 98% system, 0% softirq, 3% hardirq, 0% idle MentorEmbedded#3: 98% system, 0% softirq, 3% hardirq, 0% idle MentorEmbedded#4: 98% system, 0% softirq, 3% hardirq, 0% idle MentorEmbedded#5: 98% system, 1% softirq, 3% hardirq, 0% idle Modules linked in: irq event stamp: 73096 hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline] hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994 hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582 softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588 CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Testing showed that the problem did not occur if the two error messages -- the first two lines above -- were removed; apparently adding material to the kernel log takes a surprisingly large amount of time. In any case, the best approach for preventing these lockups and to avoid spamming the log with thousands of error messages per second is to ratelimit the two dev_err() calls. Therefore we replace them with dev_err_ratelimited(). Signed-off-by: Alan Stern <[email protected]> Suggested-by: Greg KH <[email protected]> Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/linux-usb/[email protected]/ Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/linux-usb/[email protected]/ Fixes: 9908a32 ("USB: remove err() macro from usb class drivers") Link: https://lore.kernel.org/linux-usb/[email protected]/ Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 668c0406d887467d53f8fe79261dda1d22d5b671 ] When the torture_type is set srcu or srcud and cb_barrier is non-zero, running the rcutorture test will trigger the following warning: [ 163.910989][ C1] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 [ 163.910994][ C1] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1 [ 163.910999][ C1] preempt_count: 10001, expected: 0 [ 163.911002][ C1] RCU nest depth: 0, expected: 0 [ 163.911005][ C1] INFO: lockdep is turned off. [ 163.911007][ C1] irq event stamp: 30964 [ 163.911010][ C1] hardirqs last enabled at (30963): [<ffffffffabc7df52>] do_idle+0x362/0x500 [ 163.911018][ C1] hardirqs last disabled at (30964): [<ffffffffae616eff>] sysvec_call_function_single+0xf/0xd0 [ 163.911025][ C1] softirqs last enabled at (0): [<ffffffffabb6475f>] copy_process+0x16ff/0x6580 [ 163.911033][ C1] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 163.911038][ C1] Preemption disabled at: [ 163.911039][ C1] [<ffffffffacf1964b>] stack_depot_save_flags+0x24b/0x6c0 [ 163.911063][ C1] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 6.8.0-rc4-rt4-yocto-preempt-rt+ MentorEmbedded#3 1e39aa9a737dd024a3275c4f835a872f673a7d3a [ 163.911071][ C1] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [ 163.911075][ C1] Call Trace: [ 163.911078][ C1] <IRQ> [ 163.911080][ C1] dump_stack_lvl+0x88/0xd0 [ 163.911089][ C1] dump_stack+0x10/0x20 [ 163.911095][ C1] __might_resched+0x36f/0x530 [ 163.911105][ C1] rt_spin_lock+0x82/0x1c0 [ 163.911112][ C1] spin_lock_irqsave_ssp_contention+0xb8/0x100 [ 163.911121][ C1] srcu_gp_start_if_needed+0x782/0xf00 [ 163.911128][ C1] ? _raw_spin_unlock_irqrestore+0x46/0x70 [ 163.911136][ C1] ? debug_object_active_state+0x336/0x470 [ 163.911148][ C1] ? __pfx_srcu_gp_start_if_needed+0x10/0x10 [ 163.911156][ C1] ? __pfx_lock_release+0x10/0x10 [ 163.911165][ C1] ? __pfx_rcu_torture_barrier_cbf+0x10/0x10 [ 163.911188][ C1] __call_srcu+0x9f/0xe0 [ 163.911196][ C1] call_srcu+0x13/0x20 [ 163.911201][ C1] srcu_torture_call+0x1b/0x30 [ 163.911224][ C1] rcu_torture_barrier1cb+0x4a/0x60 [ 163.911247][ C1] __flush_smp_call_function_queue+0x267/0xca0 [ 163.911256][ C1] ? __pfx_rcu_torture_barrier1cb+0x10/0x10 [ 163.911281][ C1] generic_smp_call_function_single_interrupt+0x13/0x20 [ 163.911288][ C1] __sysvec_call_function_single+0x7d/0x280 [ 163.911295][ C1] sysvec_call_function_single+0x93/0xd0 [ 163.911302][ C1] </IRQ> [ 163.911304][ C1] <TASK> [ 163.911308][ C1] asm_sysvec_call_function_single+0x1b/0x20 [ 163.911313][ C1] RIP: 0010:default_idle+0x17/0x20 [ 163.911326][ C1] RSP: 0018:ffff888001997dc8 EFLAGS: 00000246 [ 163.911333][ C1] RAX: 0000000000000000 RBX: dffffc0000000000 RCX: ffffffffae618b51 [ 163.911337][ C1] RDX: 0000000000000000 RSI: ffffffffaea80920 RDI: ffffffffaec2de80 [ 163.911342][ C1] RBP: ffff888001997dc8 R08: 0000000000000001 R09: ffffed100d740cad [ 163.911346][ C1] R10: ffffed100d740cac R11: ffff88806ba06563 R12: 0000000000000001 [ 163.911350][ C1] R13: ffffffffafe460c0 R14: ffffffffafe460c0 R15: 0000000000000000 [ 163.911358][ C1] ? ct_kernel_exit.constprop.3+0x121/0x160 [ 163.911369][ C1] ? lockdep_hardirqs_on+0xc4/0x150 [ 163.911376][ C1] arch_cpu_idle+0x9/0x10 [ 163.911383][ C1] default_idle_call+0x7a/0xb0 [ 163.911390][ C1] do_idle+0x362/0x500 [ 163.911398][ C1] ? __pfx_do_idle+0x10/0x10 [ 163.911404][ C1] ? complete_with_flags+0x8b/0xb0 [ 163.911416][ C1] cpu_startup_entry+0x58/0x70 [ 163.911423][ C1] start_secondary+0x221/0x280 [ 163.911430][ C1] ? __pfx_start_secondary+0x10/0x10 [ 163.911440][ C1] secondary_startup_64_no_verify+0x17f/0x18b [ 163.911455][ C1] </TASK> This commit therefore use smp_call_on_cpu() instead of smp_call_function_single(), make rcu_torture_barrier1cb() invoked happens on task-context. Signed-off-by: Zqiang <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]> Signed-off-by: Uladzislau Rezki (Sony) <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit f1e197a665c2148ebc25fe09c53689e60afea195 ] trace_drop_common() is called with preemption disabled, and it acquires a spin_lock. This is problematic for RT kernels because spin_locks are sleeping locks in this configuration, which causes the following splat: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 449, name: rcuc/47 preempt_count: 1, expected: 0 RCU nest depth: 2, expected: 2 5 locks held by rcuc/47/449: #0: ff1100086ec30a60 ((softirq_ctrl.lock)){+.+.}-{2:2}, at: __local_bh_disable_ip+0x105/0x210 MentorEmbedded#1: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: rt_spin_lock+0xbf/0x130 MentorEmbedded#2: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: __local_bh_disable_ip+0x11c/0x210 MentorEmbedded#3: ffffffffb394a160 (rcu_callback){....}-{0:0}, at: rcu_do_batch+0x360/0xc70 MentorEmbedded#4: ff1100086ee07520 (&data->lock){+.+.}-{2:2}, at: trace_drop_common.constprop.0+0xb5/0x290 irq event stamp: 139909 hardirqs last enabled at (139908): [<ffffffffb1df2b33>] _raw_spin_unlock_irqrestore+0x63/0x80 hardirqs last disabled at (139909): [<ffffffffb19bd03d>] trace_drop_common.constprop.0+0x26d/0x290 softirqs last enabled at (139892): [<ffffffffb07a1083>] __local_bh_enable_ip+0x103/0x170 softirqs last disabled at (139898): [<ffffffffb0909b33>] rcu_cpu_kthread+0x93/0x1f0 Preemption disabled at: [<ffffffffb1de786b>] rt_mutex_slowunlock+0xab/0x2e0 CPU: 47 PID: 449 Comm: rcuc/47 Not tainted 6.9.0-rc2-rt1+ MentorEmbedded#7 Hardware name: Dell Inc. PowerEdge R650/0Y2G81, BIOS 1.6.5 04/15/2022 Call Trace: <TASK> dump_stack_lvl+0x8c/0xd0 dump_stack+0x14/0x20 __might_resched+0x21e/0x2f0 rt_spin_lock+0x5e/0x130 ? trace_drop_common.constprop.0+0xb5/0x290 ? skb_queue_purge_reason.part.0+0x1bf/0x230 trace_drop_common.constprop.0+0xb5/0x290 ? preempt_count_sub+0x1c/0xd0 ? _raw_spin_unlock_irqrestore+0x4a/0x80 ? __pfx_trace_drop_common.constprop.0+0x10/0x10 ? rt_mutex_slowunlock+0x26a/0x2e0 ? skb_queue_purge_reason.part.0+0x1bf/0x230 ? __pfx_rt_mutex_slowunlock+0x10/0x10 ? skb_queue_purge_reason.part.0+0x1bf/0x230 trace_kfree_skb_hit+0x15/0x20 trace_kfree_skb+0xe9/0x150 kfree_skb_reason+0x7b/0x110 skb_queue_purge_reason.part.0+0x1bf/0x230 ? __pfx_skb_queue_purge_reason.part.0+0x10/0x10 ? mark_lock.part.0+0x8a/0x520 ... trace_drop_common() also disables interrupts, but this is a minor issue because we could easily replace it with a local_lock. Replace the spin_lock with raw_spin_lock to avoid sleeping in atomic context. Signed-off-by: Wander Lairson Costa <[email protected]> Reported-by: Hu Chunyu <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit be346c1a6eeb49d8fda827d2a9522124c2f72f36 upstream. The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 MentorEmbedded#1 __crash_kexec at ffffffff8c1338fa MentorEmbedded#2 panic at ffffffff8c1d69b9 MentorEmbedded#3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] MentorEmbedded#4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] MentorEmbedded#5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] MentorEmbedded#6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] MentorEmbedded#7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] MentorEmbedded#8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] MentorEmbedded#9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] MentorEmbedded#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 667574e873b5f77a220b2a93329689f36fb56d5d upstream. When tries to demote 1G hugetlb folios, a lockdep warning is observed: ============================================ WARNING: possible recursive locking detected 6.10.0-rc6-00452-ga4d0275fa660-dirty #79 Not tainted -------------------------------------------- bash/710 is trying to acquire lock: ffffffff8f0a7850 (&h->resize_lock){+.+.}-{3:3}, at: demote_store+0x244/0x460 but task is already holding lock: ffffffff8f0a6f48 (&h->resize_lock){+.+.}-{3:3}, at: demote_store+0xae/0x460 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&h->resize_lock); lock(&h->resize_lock); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by bash/710: #0: ffff8f118439c3f0 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x64/0xe0 MentorEmbedded#1: ffff8f11893b9e88 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0xf8/0x1d0 MentorEmbedded#2: ffff8f1183dc4428 (kn->active#98){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x100/0x1d0 MentorEmbedded#3: ffffffff8f0a6f48 (&h->resize_lock){+.+.}-{3:3}, at: demote_store+0xae/0x460 stack backtrace: CPU: 3 PID: 710 Comm: bash Not tainted 6.10.0-rc6-00452-ga4d0275fa660-dirty #79 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x68/0xa0 __lock_acquire+0x10f2/0x1ca0 lock_acquire+0xbe/0x2d0 __mutex_lock+0x6d/0x400 demote_store+0x244/0x460 kernfs_fop_write_iter+0x12c/0x1d0 vfs_write+0x380/0x540 ksys_write+0x64/0xe0 do_syscall_64+0xb9/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fa61db14887 RSP: 002b:00007ffc56c48358 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fa61db14887 RDX: 0000000000000002 RSI: 000055a030050220 RDI: 0000000000000001 RBP: 000055a030050220 R08: 00007fa61dbd1460 R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002 R13: 00007fa61dc1b780 R14: 00007fa61dc17600 R15: 00007fa61dc16a00 </TASK> Lockdep considers this an AA deadlock because the different resize_lock mutexes reside in the same lockdep class, but this is a false positive. Place them in distinct classes to avoid these warnings. Link: https://lkml.kernel.org/r/[email protected] Fixes: 8531fc6f52f5 ("hugetlb: add hugetlb demote page support") Signed-off-by: Miaohe Lin <[email protected]> Acked-by: Muchun Song <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 86a41ea9fd79ddb6145cb8ebf5aeafceabca6f7d ] When l2tp tunnels use a socket provided by userspace, we can hit lockdep splats like the below when data is transmitted through another (unrelated) userspace socket which then gets routed over l2tp. This issue was previously discussed here: https://lore.kernel.org/netdev/[email protected]/ The solution is to have lockdep treat socket locks of l2tp tunnel sockets separately than those of standard INET sockets. To do so, use a different lockdep subclass where lock nesting is possible. ============================================ WARNING: possible recursive locking detected 6.10.0+ #34 Not tainted -------------------------------------------- iperf3/771 is trying to acquire lock: ffff8881027601d8 (slock-AF_INET/1){+.-.}-{2:2}, at: l2tp_xmit_skb+0x243/0x9d0 but task is already holding lock: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_INET/1); lock(slock-AF_INET/1); *** DEADLOCK *** May be due to missing lock nesting notation 10 locks held by iperf3/771: #0: ffff888102650258 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x1a/0x40 MentorEmbedded#1: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 MentorEmbedded#2: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 MentorEmbedded#3: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x28b/0x9f0 MentorEmbedded#4: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0xf9/0x260 MentorEmbedded#5: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 MentorEmbedded#6: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 MentorEmbedded#7: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 MentorEmbedded#8: ffffffff822ac1e0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0xcc/0x1450 MentorEmbedded#9: ffff888101f33258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock#2){+...}-{2:2}, at: __dev_queue_xmit+0x513/0x1450 stack backtrace: CPU: 2 UID: 0 PID: 771 Comm: iperf3 Not tainted 6.10.0+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x69/0xa0 dump_stack+0xc/0x20 __lock_acquire+0x135d/0x2600 ? srso_alias_return_thunk+0x5/0xfbef5 lock_acquire+0xc4/0x2a0 ? l2tp_xmit_skb+0x243/0x9d0 ? __skb_checksum+0xa3/0x540 _raw_spin_lock_nested+0x35/0x50 ? l2tp_xmit_skb+0x243/0x9d0 l2tp_xmit_skb+0x243/0x9d0 l2tp_eth_dev_xmit+0x3c/0xc0 dev_hard_start_xmit+0x11e/0x420 sch_direct_xmit+0xc3/0x640 __dev_queue_xmit+0x61c/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 __tcp_send_ack+0x1b8/0x340 tcp_send_ack+0x23/0x30 __tcp_ack_snd_check+0xa8/0x530 ? srso_alias_return_thunk+0x5/0xfbef5 tcp_rcv_established+0x412/0xd70 tcp_v4_do_rcv+0x299/0x420 tcp_v4_rcv+0x1991/0x1e10 ip_protocol_deliver_rcu+0x50/0x220 ip_local_deliver_finish+0x158/0x260 ip_local_deliver+0xc8/0xe0 ip_rcv+0xe5/0x1d0 ? __pfx_ip_rcv+0x10/0x10 __netif_receive_skb_one_core+0xce/0xe0 ? process_backlog+0x28b/0x9f0 __netif_receive_skb+0x34/0xd0 ? process_backlog+0x28b/0x9f0 process_backlog+0x2cb/0x9f0 __napi_poll.constprop.0+0x61/0x280 net_rx_action+0x332/0x670 ? srso_alias_return_thunk+0x5/0xfbef5 ? find_held_lock+0x2b/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 handle_softirqs+0xda/0x480 ? __dev_queue_xmit+0xa2c/0x1450 do_softirq+0xa1/0xd0 </IRQ> <TASK> __local_bh_enable_ip+0xc8/0xe0 ? __dev_queue_xmit+0xa2c/0x1450 __dev_queue_xmit+0xa48/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 tcp_write_xmit+0x766/0x2fb0 ? __entry_text_end+0x102ba9/0x102bad ? srso_alias_return_thunk+0x5/0xfbef5 ? __might_fault+0x74/0xc0 ? srso_alias_return_thunk+0x5/0xfbef5 __tcp_push_pending_frames+0x56/0x190 tcp_push+0x117/0x310 tcp_sendmsg_locked+0x14c1/0x1740 tcp_sendmsg+0x28/0x40 inet_sendmsg+0x5d/0x90 sock_write_iter+0x242/0x2b0 vfs_write+0x68d/0x800 ? __pfx_sock_write_iter+0x10/0x10 ksys_write+0xc8/0xf0 __x64_sys_write+0x3d/0x50 x64_sys_call+0xfaf/0x1f50 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f4d143af992 Code: c3 8b 07 85 c0 75 24 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> e9 01 cc ff ff 41 54 b8 02 00 00 0 RSP: 002b:00007ffd65032058 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f4d143af992 RDX: 0000000000000025 RSI: 00007f4d143f3bcc RDI: 0000000000000005 RBP: 00007f4d143f2b28 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4d143f3bcc R13: 0000000000000005 R14: 0000000000000000 R15: 00007ffd650323f0 </TASK> Fixes: 0b2c59720e65 ("l2tp: close all race conditions in l2tp_tunnel_register()") Suggested-by: Eric Dumazet <[email protected]> Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=6acef9e0a4d1f46c83d4 CC: [email protected] CC: [email protected] Signed-off-by: James Chapman <[email protected]> Signed-off-by: Tom Parkin <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

kergoth requested review from Noor-Ahsan, abelal and ahsanhussain March 1, 2023 19:14

kergoth assigned Noor-Ahsan Mar 1, 2023

Technohacker and others added 26 commits March 3, 2023 03:31

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Update to LTS kernel v5.15.96 via rebase #3

Update to LTS kernel v5.15.96 via rebase #3

kergoth commented Mar 1, 2023 •

edited

Loading

Update to LTS kernel v5.15.96 via rebase #3

Update to LTS kernel v5.15.96 via rebase #3

Conversation

kergoth commented Mar 1, 2023 • edited Loading

kergoth commented Mar 1, 2023 •

edited

Loading