iio: adc: add support for Berlin

This patch adds the support of the Berlin ADC, available on Berlin SoCs. This ADC has 8 channels available, with one connected to a temperature sensor. The particularity here, is that the temperature sensor connected to the ADC has its own registers, and both the ADC and the temperature sensor must be configured when using it. Signed-off-by: Antoine Tenart <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
kergoth · May 23, 2015 · 70f1937 · 70f1937
1 parent 90bad33
commit 70f1937
Show file tree

Hide file tree

Showing 3 changed files with 386 additions and 0 deletions.
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
@@ -135,6 +135,13 @@ config AXP288_ADC
 	  device. Depending on platform configuration, this general purpose ADC can
 	  be used for sampling sensors such as thermal resistors.
 
+config BERLIN2_ADC
+	tristate "Marvell Berlin2 ADC driver"
+	depends on ARCH_BERLIN
+	help
+	  Marvell Berlin2 ADC driver. This ADC has 8 channels, with one used for
+	  temperature measurement.
+
 config DA9150_GPADC
 	tristate "Dialog DA9150 GPADC driver support"
 	depends on MFD_DA9150

diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_AD7887) += ad7887.o
 obj-$(CONFIG_AD799X) += ad799x.o
 obj-$(CONFIG_AT91_ADC) += at91_adc.o
 obj-$(CONFIG_AXP288_ADC) += axp288_adc.o
+obj-$(CONFIG_BERLIN2_ADC) += berlin2-adc.o
 obj-$(CONFIG_DA9150_GPADC) += da9150-gpadc.o
 obj-$(CONFIG_CC10001_ADC) += cc10001_adc.o
 obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o