reimplement Set efficiently using hash tables #2
Assignees
Comments
ghost
assigned 
|
this was an accidental duplicate of issue #1. |
Closed
Closed
Closed
Merged
burrowsa
pushed a commit
to burrowsa/julia
that referenced
this issue
Mar 24, 2014
vtjnash
added a commit
that referenced
this issue
Oct 6, 2023
This exposes the GC "stop the world" API to the user, for causing a thread to quickly stop executing Julia code. This adds two APIs (that will need to be exported and documented later): ``` julia> @CCall jl_safepoint_suspend_thread(#=tid=#1::Cint, #=magicnumber=#2::Cint)::Cint # roughly tkill(1, SIGSTOP) julia> @CCall jl_safepoint_resume_thread(#=tid=#1::Cint)::Cint # roughly tkill(1, SIGCONT) ``` You can even suspend yourself, if there is another task to resume you 10 seconds later: ``` julia> ccall(:jl_enter_threaded_region, Cvoid, ()) julia> t = @task let; Libc.systemsleep(10); print("\nhello from $(Threads.threadid())\n"); @CCall jl_safepoint_resume_thread(0::Cint)::Cint; end; ccall(:jl_set_task_tid, Cint, (Any, Cint), t, 1); schedule(t); julia> @time @CCall jl_safepoint_suspend_thread(0::Cint, 2::Cint)::Cint hello from 2 10 seconds (6 allocations: 264 bytes) 1 ``` The meaning of the magic number is actually the kind of stop that you want: ``` // n.b. suspended threads may still run in the GC or GC safe regions // but shouldn't be observable, depending on which enum the user picks (only 1 and 2 are typically recommended here) // waitstate = 0 : do not wait for suspend to finish // waitstate = 1 : wait for gc_state != 0 (JL_GC_STATE_WAITING or JL_GC_STATE_SAFE) // waitstate = 2 : wait for gc_state != 0 (JL_GC_STATE_WAITING or JL_GC_STATE_SAFE) and that GC is not running on that thread // waitstate = 3 : wait for full suspend (gc_state == JL_GC_STATE_WAITING) -- this may never happen if thread is sleeping currently // if another thread comes along and calls jl_safepoint_resume, we also return early // return new suspend count on success, 0 on failure ``` Only magic number 2 is currently meaningful to the user though. The difference between waitstate 1 and 2 is only relevant in C code which is calling this from JL_GC_STATE_SAFE, since otherwise it is a priori known that GC isn't running, else we too would be running the GC. But the distinction of those states might be useful if we have a concurrent collector. Very important warning: if the stopped thread is holding any locks (e.g. for codegen or types) that you then attempt to acquire, your thread will deadlock. This is very likely, unless you are very careful. A future update to this API may try to change the waitstate to give the option to wait for the thread to release internal or known locks.
Keno
added a commit
that referenced
this issue
Oct 9, 2023
Since we now operate on lowered AST, we don't know which things were statements and which weren't, so this isn't a meaningfully implementable command anymore. Part of #2
Keno
added a commit
that referenced
this issue
Oct 9, 2023
Closed
quinnj
pushed a commit
that referenced
this issue
Jan 26, 2024
`@something` eagerly unwraps any `Some` given to it, while keeping the
variable between its arguments the same. This can be an issue if a
previously unpacked value is used as input to `@something`, leading to a
type instability on more than two arguments (e.g. because of a fallback
to `Some(nothing)`). By using different variables for each argument,
type inference has an easier time handling these cases that are isolated
to single branches anyway.
This also adds some comments to the macro, since it's non-obvious what
it does.
Benchmarking the specific case I encountered this in led to a ~2x
performance improvement on multiple machines.
1.10-beta3/master:
```
[sukera@tower 01]$ jl1100 -q --project=. -L 01.jl -e 'bench()'
v"1.10.0-beta3"
BenchmarkTools.Trial: 10000 samples with 1 evaluation.
Range (min … max): 38.670 μs … 70.350 μs ┊ GC (min … max): 0.00% … 0.00%
Time (median): 43.340 μs ┊ GC (median): 0.00%
Time (mean ± σ): 43.395 μs ± 1.518 μs ┊ GC (mean ± σ): 0.00% ± 0.00%
▆█▂ ▁▁
▂▂▂▂▂▂▂▂▂▁▂▂▂▃▃▃▂▂▃▃▃▂▂▂▂▂▄▇███▆██▄▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂ ▃
38.7 μs Histogram: frequency by time 48 μs <
Memory estimate: 0 bytes, allocs estimate: 0.
```
This PR:
```
[sukera@tower 01]$ julia -q --project=. -L 01.jl -e 'bench()'
v"1.11.0-DEV.970"
BenchmarkTools.Trial: 10000 samples with 1 evaluation.
Range (min … max): 22.820 μs … 44.980 μs ┊ GC (min … max): 0.00% … 0.00%
Time (median): 24.300 μs ┊ GC (median): 0.00%
Time (mean ± σ): 24.370 μs ± 832.239 ns ┊ GC (mean ± σ): 0.00% ± 0.00%
▂▅▇██▇▆▅▁
▂▂▂▂▂▂▂▂▃▃▄▅▇███████████▅▄▃▃▂▂▂▂▂▂▂▂▂▂▁▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▂▁▁▂▂ ▃
22.8 μs Histogram: frequency by time 27.7 μs <
Memory estimate: 0 bytes, allocs estimate: 0.
```
<details>
<summary>Benchmarking code (spoilers for Advent Of Code 2023 Day 01,
Part 01). Running this requires the input of that Advent Of Code
day.</summary>
```julia
using BenchmarkTools
using InteractiveUtils
isdigit(d::UInt8) = UInt8('0') <= d <= UInt8('9')
someDigit(c::UInt8) = isdigit(c) ? Some(c - UInt8('0')) : nothing
function part1(data)
total = 0
may_a = nothing
may_b = nothing
for c in data
digitRes = someDigit(c)
may_a = @something may_a digitRes Some(nothing)
may_b = @something digitRes may_b Some(nothing)
if c == UInt8('\n')
digit_a = may_a::UInt8
digit_b = may_b::UInt8
total += digit_a*0xa + digit_b
may_a = nothing
may_b = nothing
end
end
return total
end
function bench()
data = read("input.txt")
display(VERSION)
println()
display(@benchmark part1($data))
nothing
end
```
</details>
<details>
<summary>`@code_warntype` before</summary>
```julia
julia> @code_warntype part1(data)
MethodInstance for part1(::Vector{UInt8})
from part1(data) @ Main ~/Documents/projects/AOC/2023/01/01.jl:7
Arguments
#self#::Core.Const(part1)
data::Vector{UInt8}
Locals
@_3::Union{Nothing, Tuple{UInt8, Int64}}
may_b::Union{Nothing, UInt8}
may_a::Union{Nothing, UInt8}
total::Int64
c::UInt8
digit_b::UInt8
digit_a::UInt8
val@_10::Any
val@_11::Any
digitRes::Union{Nothing, Some{UInt8}}
@_13::Union{Some{Nothing}, Some{UInt8}, UInt8}
@_14::Union{Some{Nothing}, Some{UInt8}}
@_15::Some{Nothing}
@_16::Union{Some{Nothing}, Some{UInt8}, UInt8}
@_17::Union{Some{Nothing}, UInt8}
@_18::Some{Nothing}
Body::Int64
1 ── (total = 0)
│ (may_a = Main.nothing)
│ (may_b = Main.nothing)
│ %4 = data::Vector{UInt8}
│ (@_3 = Base.iterate(%4))
│ %6 = (@_3 === nothing)::Bool
│ %7 = Base.not_int(%6)::Bool
└─── goto #24 if not %7
2 ┄─ Core.NewvarNode(:(digit_b))
│ Core.NewvarNode(:(digit_a))
│ Core.NewvarNode(:(val@_10))
│ %12 = @_3::Tuple{UInt8, Int64}
│ (c = Core.getfield(%12, 1))
│ %14 = Core.getfield(%12, 2)::Int64
│ (digitRes = Main.someDigit(c))
│ (val@_11 = may_a)
│ %17 = (val@_11::Union{Nothing, UInt8} !== Base.nothing)::Bool
└─── goto #4 if not %17
3 ── (@_13 = val@_11::UInt8)
└─── goto #11
4 ── (val@_11 = digitRes)
│ %22 = (val@_11::Union{Nothing, Some{UInt8}} !== Base.nothing)::Bool
└─── goto #6 if not %22
5 ── (@_14 = val@_11::Some{UInt8})
└─── goto #10
6 ── (val@_11 = Main.Some(Main.nothing))
│ %27 = (val@_11::Core.Const(Some(nothing)) !== Base.nothing)::Core.Const(true)
└─── goto #8 if not %27
7 ── (@_15 = val@_11::Core.Const(Some(nothing)))
└─── goto #9
8 ── Core.Const(:(@_15 = Base.nothing))
9 ┄─ (@_14 = @_15)
10 ┄ (@_13 = @_14)
11 ┄ %34 = @_13::Union{Some{Nothing}, Some{UInt8}, UInt8}
│ (may_a = Base.something(%34))
│ (val@_10 = digitRes)
│ %37 = (val@_10::Union{Nothing, Some{UInt8}} !== Base.nothing)::Bool
└─── goto #13 if not %37
12 ─ (@_16 = val@_10::Some{UInt8})
└─── goto #20
13 ─ (val@_10 = may_b)
│ %42 = (val@_10::Union{Nothing, UInt8} !== Base.nothing)::Bool
└─── goto #15 if not %42
14 ─ (@_17 = val@_10::UInt8)
└─── goto #19
15 ─ (val@_10 = Main.Some(Main.nothing))
│ %47 = (val@_10::Core.Const(Some(nothing)) !== Base.nothing)::Core.Const(true)
└─── goto #17 if not %47
16 ─ (@_18 = val@_10::Core.Const(Some(nothing)))
└─── goto #18
17 ─ Core.Const(:(@_18 = Base.nothing))
18 ┄ (@_17 = @_18)
19 ┄ (@_16 = @_17)
20 ┄ %54 = @_16::Union{Some{Nothing}, Some{UInt8}, UInt8}
│ (may_b = Base.something(%54))
│ %56 = c::UInt8
│ %57 = Main.UInt8('\n')::Core.Const(0x0a)
│ %58 = (%56 == %57)::Bool
└─── goto #22 if not %58
21 ─ (digit_a = Core.typeassert(may_a, Main.UInt8))
│ (digit_b = Core.typeassert(may_b, Main.UInt8))
│ %62 = total::Int64
│ %63 = (digit_a * 0x0a)::UInt8
│ %64 = (%63 + digit_b)::UInt8
│ (total = %62 + %64)
│ (may_a = Main.nothing)
└─── (may_b = Main.nothing)
22 ┄ (@_3 = Base.iterate(%4, %14))
│ %69 = (@_3 === nothing)::Bool
│ %70 = Base.not_int(%69)::Bool
└─── goto #24 if not %70
23 ─ goto #2
24 ┄ return total
```
</details>
<details>
<summary>`@code_native debuginfo=:none` Before </summary>
```julia
julia> @code_native debuginfo=:none part1(data)
.text
.file "part1"
.globl julia_part1_418 # -- Begin function julia_part1_418
.p2align 4, 0x90
.type julia_part1_418,@function
julia_part1_418: # @julia_part1_418
# %bb.0: # %top
push rbp
mov rbp, rsp
push r15
push r14
push r13
push r12
push rbx
sub rsp, 40
mov rax, qword ptr [rdi + 8]
test rax, rax
je .LBB0_1
# %bb.2: # %L17
mov rcx, qword ptr [rdi]
dec rax
mov r10b, 1
xor r14d, r14d
# implicit-def: $r12b
# implicit-def: $r13b
# implicit-def: $r9b
# implicit-def: $sil
mov qword ptr [rbp - 64], rax # 8-byte Spill
mov al, 1
mov dword ptr [rbp - 48], eax # 4-byte Spill
# implicit-def: $al
# kill: killed $al
xor eax, eax
mov qword ptr [rbp - 56], rax # 8-byte Spill
mov qword ptr [rbp - 72], rcx # 8-byte Spill
# implicit-def: $cl
jmp .LBB0_3
.p2align 4, 0x90
.LBB0_8: # in Loop: Header=BB0_3 Depth=1
mov dword ptr [rbp - 48], 0 # 4-byte Folded Spill
.LBB0_24: # %post_union_move
# in Loop: Header=BB0_3 Depth=1
movzx r13d, byte ptr [rbp - 41] # 1-byte Folded Reload
mov r12d, r8d
cmp qword ptr [rbp - 64], r14 # 8-byte Folded Reload
je .LBB0_13
.LBB0_25: # %guard_exit113
# in Loop: Header=BB0_3 Depth=1
inc r14
mov r10d, ebx
.LBB0_3: # %L19
# =>This Inner Loop Header: Depth=1
mov rax, qword ptr [rbp - 72] # 8-byte Reload
xor ebx, ebx
xor edi, edi
movzx r15d, r9b
movzx ecx, cl
movzx esi, sil
mov r11b, 1
# implicit-def: $r9b
movzx edx, byte ptr [rax + r14]
lea eax, [rdx - 58]
lea r8d, [rdx - 48]
cmp al, -10
setae bl
setb dil
test r10b, 1
cmovne r15d, edi
mov edi, 0
cmovne ecx, ebx
mov bl, 1
cmovne esi, edi
test r15b, 1
jne .LBB0_7
# %bb.4: # %L76
# in Loop: Header=BB0_3 Depth=1
mov r11b, 2
test cl, 1
jne .LBB0_5
# %bb.6: # %L78
# in Loop: Header=BB0_3 Depth=1
mov ebx, r10d
mov r9d, r15d
mov byte ptr [rbp - 41], r13b # 1-byte Spill
test sil, 1
je .LBB0_26
.LBB0_7: # %L82
# in Loop: Header=BB0_3 Depth=1
cmp al, -11
jbe .LBB0_9
jmp .LBB0_8
.p2align 4, 0x90
.LBB0_5: # in Loop: Header=BB0_3 Depth=1
mov ecx, r8d
mov sil, 1
xor ebx, ebx
mov byte ptr [rbp - 41], r8b # 1-byte Spill
xor r9d, r9d
xor ecx, ecx
cmp al, -11
ja .LBB0_8
.LBB0_9: # %L90
# in Loop: Header=BB0_3 Depth=1
test byte ptr [rbp - 48], 1 # 1-byte Folded Reload
jne .LBB0_23
# %bb.10: # %L115
# in Loop: Header=BB0_3 Depth=1
cmp dl, 10
jne .LBB0_11
# %bb.14: # %L122
# in Loop: Header=BB0_3 Depth=1
test r15b, 1
jne .LBB0_15
# %bb.12: # %L130.thread
# in Loop: Header=BB0_3 Depth=1
movzx eax, byte ptr [rbp - 41] # 1-byte Folded Reload
mov bl, 1
add eax, eax
lea eax, [rax + 4*rax]
add al, r12b
movzx eax, al
add qword ptr [rbp - 56], rax # 8-byte Folded Spill
mov al, 1
mov dword ptr [rbp - 48], eax # 4-byte Spill
cmp qword ptr [rbp - 64], r14 # 8-byte Folded Reload
jne .LBB0_25
jmp .LBB0_13
.p2align 4, 0x90
.LBB0_23: # %L115.thread
# in Loop: Header=BB0_3 Depth=1
mov al, 1
# implicit-def: $r8b
mov dword ptr [rbp - 48], eax # 4-byte Spill
cmp dl, 10
jne .LBB0_24
jmp .LBB0_21
.LBB0_11: # in Loop: Header=BB0_3 Depth=1
mov r8d, r12d
jmp .LBB0_24
.LBB0_1:
xor eax, eax
mov qword ptr [rbp - 56], rax # 8-byte Spill
.LBB0_13: # %L159
mov rax, qword ptr [rbp - 56] # 8-byte Reload
add rsp, 40
pop rbx
pop r12
pop r13
pop r14
pop r15
pop rbp
ret
.LBB0_21: # %L122.thread
test r15b, 1
jne .LBB0_15
# %bb.22: # %post_box_union58
movabs rdi, offset .L_j_str1
movabs rax, offset ijl_type_error
movabs rsi, 140008511215408
movabs rdx, 140008667209736
call rax
.LBB0_15: # %fail
cmp r11b, 1
je .LBB0_19
# %bb.16: # %fail
movzx eax, r11b
cmp eax, 2
jne .LBB0_17
# %bb.20: # %box_union54
movzx eax, byte ptr [rbp - 41] # 1-byte Folded Reload
movabs rcx, offset jl_boxed_uint8_cache
mov rdx, qword ptr [rcx + 8*rax]
jmp .LBB0_18
.LBB0_26: # %L80
movabs rax, offset ijl_throw
movabs rdi, 140008495049392
call rax
.LBB0_19: # %box_union
movabs rdx, 140008667209736
jmp .LBB0_18
.LBB0_17:
xor edx, edx
.LBB0_18: # %post_box_union
movabs rdi, offset .L_j_str1
movabs rax, offset ijl_type_error
movabs rsi, 140008511215408
call rax
.Lfunc_end0:
.size julia_part1_418, .Lfunc_end0-julia_part1_418
# -- End function
.type .L_j_str1,@object # @_j_str1
.section .rodata.str1.1,"aMS",@progbits,1
.L_j_str1:
.asciz "typeassert"
.size .L_j_str1, 11
.section ".note.GNU-stack","",@progbits
```
</details>
<details>
<summary>`@code_warntype` After</summary>
```julia
[sukera@tower 01]$ julia -q --project=. -L 01.jl
julia> data = read("input.txt");
julia> @code_warntype part1(data)
MethodInstance for part1(::Vector{UInt8})
from part1(data) @ Main ~/Documents/projects/AOC/2023/01/01.jl:7
Arguments
#self#::Core.Const(part1)
data::Vector{UInt8}
Locals
@_3::Union{Nothing, Tuple{UInt8, Int64}}
may_b::Union{Nothing, UInt8}
may_a::Union{Nothing, UInt8}
total::Int64
val@_7::Union{}
val@_8::Union{}
c::UInt8
digit_b::UInt8
digit_a::UInt8
##215::Some{Nothing}
##216::Union{Nothing, UInt8}
##217::Union{Nothing, Some{UInt8}}
##212::Some{Nothing}
##213::Union{Nothing, Some{UInt8}}
##214::Union{Nothing, UInt8}
digitRes::Union{Nothing, Some{UInt8}}
@_19::Union{Nothing, UInt8}
@_20::Union{Nothing, UInt8}
@_21::Nothing
@_22::Union{Nothing, UInt8}
@_23::Union{Nothing, UInt8}
@_24::Nothing
Body::Int64
1 ── (total = 0)
│ (may_a = Main.nothing)
│ (may_b = Main.nothing)
│ %4 = data::Vector{UInt8}
│ (@_3 = Base.iterate(%4))
│ %6 = @_3::Union{Nothing, Tuple{UInt8, Int64}}
│ %7 = (%6 === nothing)::Bool
│ %8 = Base.not_int(%7)::Bool
└─── goto #24 if not %8
2 ┄─ Core.NewvarNode(:(val@_7))
│ Core.NewvarNode(:(val@_8))
│ Core.NewvarNode(:(digit_b))
│ Core.NewvarNode(:(digit_a))
│ Core.NewvarNode(:(##215))
│ Core.NewvarNode(:(##216))
│ Core.NewvarNode(:(##217))
│ Core.NewvarNode(:(##212))
│ Core.NewvarNode(:(##213))
│ %19 = @_3::Tuple{UInt8, Int64}
│ (c = Core.getfield(%19, 1))
│ %21 = Core.getfield(%19, 2)::Int64
│ %22 = c::UInt8
│ (digitRes = Main.someDigit(%22))
│ %24 = may_a::Union{Nothing, UInt8}
│ (##214 = %24)
│ %26 = Base.:!::Core.Const(!)
│ %27 = ##214::Union{Nothing, UInt8}
│ %28 = Base.isnothing(%27)::Bool
│ %29 = (%26)(%28)::Bool
└─── goto #4 if not %29
3 ── %31 = ##214::UInt8
│ (@_19 = Base.something(%31))
└─── goto #11
4 ── %34 = digitRes::Union{Nothing, Some{UInt8}}
│ (##213 = %34)
│ %36 = Base.:!::Core.Const(!)
│ %37 = ##213::Union{Nothing, Some{UInt8}}
│ %38 = Base.isnothing(%37)::Bool
│ %39 = (%36)(%38)::Bool
└─── goto #6 if not %39
5 ── %41 = ##213::Some{UInt8}
│ (@_20 = Base.something(%41))
└─── goto #10
6 ── %44 = Main.Some::Core.Const(Some)
│ %45 = Main.nothing::Core.Const(nothing)
│ (##212 = (%44)(%45))
│ %47 = Base.:!::Core.Const(!)
│ %48 = ##212::Core.Const(Some(nothing))
│ %49 = Base.isnothing(%48)::Core.Const(false)
│ %50 = (%47)(%49)::Core.Const(true)
└─── goto #8 if not %50
7 ── %52 = ##212::Core.Const(Some(nothing))
│ (@_21 = Base.something(%52))
└─── goto #9
8 ── Core.Const(nothing)
│ Core.Const(:(val@_8 = Base.something(Base.nothing)))
│ Core.Const(nothing)
│ Core.Const(:(val@_8))
└─── Core.Const(:(@_21 = %58))
9 ┄─ %60 = @_21::Core.Const(nothing)
└─── (@_20 = %60)
10 ┄ %62 = @_20::Union{Nothing, UInt8}
└─── (@_19 = %62)
11 ┄ %64 = @_19::Union{Nothing, UInt8}
│ (may_a = %64)
│ %66 = digitRes::Union{Nothing, Some{UInt8}}
│ (##217 = %66)
│ %68 = Base.:!::Core.Const(!)
│ %69 = ##217::Union{Nothing, Some{UInt8}}
│ %70 = Base.isnothing(%69)::Bool
│ %71 = (%68)(%70)::Bool
└─── goto #13 if not %71
12 ─ %73 = ##217::Some{UInt8}
│ (@_22 = Base.something(%73))
└─── goto #20
13 ─ %76 = may_b::Union{Nothing, UInt8}
│ (##216 = %76)
│ %78 = Base.:!::Core.Const(!)
│ %79 = ##216::Union{Nothing, UInt8}
│ %80 = Base.isnothing(%79)::Bool
│ %81 = (%78)(%80)::Bool
└─── goto #15 if not %81
14 ─ %83 = ##216::UInt8
│ (@_23 = Base.something(%83))
└─── goto #19
15 ─ %86 = Main.Some::Core.Const(Some)
│ %87 = Main.nothing::Core.Const(nothing)
│ (##215 = (%86)(%87))
│ %89 = Base.:!::Core.Const(!)
│ %90 = ##215::Core.Const(Some(nothing))
│ %91 = Base.isnothing(%90)::Core.Const(false)
│ %92 = (%89)(%91)::Core.Const(true)
└─── goto #17 if not %92
16 ─ %94 = ##215::Core.Const(Some(nothing))
│ (@_24 = Base.something(%94))
└─── goto #18
17 ─ Core.Const(nothing)
│ Core.Const(:(val@_7 = Base.something(Base.nothing)))
│ Core.Const(nothing)
│ Core.Const(:(val@_7))
└─── Core.Const(:(@_24 = %100))
18 ┄ %102 = @_24::Core.Const(nothing)
└─── (@_23 = %102)
19 ┄ %104 = @_23::Union{Nothing, UInt8}
└─── (@_22 = %104)
20 ┄ %106 = @_22::Union{Nothing, UInt8}
│ (may_b = %106)
│ %108 = Main.:(==)::Core.Const(==)
│ %109 = c::UInt8
│ %110 = Main.UInt8('\n')::Core.Const(0x0a)
│ %111 = (%108)(%109, %110)::Bool
└─── goto #22 if not %111
21 ─ %113 = may_a::Union{Nothing, UInt8}
│ (digit_a = Core.typeassert(%113, Main.UInt8))
│ %115 = may_b::Union{Nothing, UInt8}
│ (digit_b = Core.typeassert(%115, Main.UInt8))
│ %117 = Main.:+::Core.Const(+)
│ %118 = total::Int64
│ %119 = Main.:+::Core.Const(+)
│ %120 = Main.:*::Core.Const(*)
│ %121 = digit_a::UInt8
│ %122 = (%120)(%121, 0x0a)::UInt8
│ %123 = digit_b::UInt8
│ %124 = (%119)(%122, %123)::UInt8
│ (total = (%117)(%118, %124))
│ (may_a = Main.nothing)
└─── (may_b = Main.nothing)
22 ┄ (@_3 = Base.iterate(%4, %21))
│ %129 = @_3::Union{Nothing, Tuple{UInt8, Int64}}
│ %130 = (%129 === nothing)::Bool
│ %131 = Base.not_int(%130)::Bool
└─── goto #24 if not %131
23 ─ goto #2
24 ┄ %134 = total::Int64
└─── return %134
```
</details>
<details>
<summary>`@code_native debuginfo=:none` After </summary>
```julia
julia> @code_native debuginfo=:none part1(data)
.text
.file "part1"
.globl julia_part1_1203 # -- Begin function julia_part1_1203
.p2align 4, 0x90
.type julia_part1_1203,@function
julia_part1_1203: # @julia_part1_1203
; Function Signature: part1(Array{UInt8, 1})
# %bb.0: # %top
#DEBUG_VALUE: part1:data <- [DW_OP_deref] $rdi
push rbp
mov rbp, rsp
push r15
push r14
push r13
push r12
push rbx
sub rsp, 40
vxorps xmm0, xmm0, xmm0
#APP
mov rax, qword ptr fs:[0]
#NO_APP
lea rdx, [rbp - 64]
vmovaps xmmword ptr [rbp - 64], xmm0
mov qword ptr [rbp - 48], 0
mov rcx, qword ptr [rax - 8]
mov qword ptr [rbp - 64], 4
mov rax, qword ptr [rcx]
mov qword ptr [rbp - 72], rcx # 8-byte Spill
mov qword ptr [rbp - 56], rax
mov qword ptr [rcx], rdx
#DEBUG_VALUE: part1:data <- [DW_OP_deref] 0
mov r15, qword ptr [rdi + 16]
test r15, r15
je .LBB0_1
# %bb.2: # %L34
mov r14, qword ptr [rdi]
dec r15
mov r11b, 1
mov r13b, 1
# implicit-def: $r12b
# implicit-def: $r10b
xor eax, eax
jmp .LBB0_3
.p2align 4, 0x90
.LBB0_4: # in Loop: Header=BB0_3 Depth=1
xor r11d, r11d
mov ebx, edi
mov r10d, r8d
.LBB0_9: # %L114
# in Loop: Header=BB0_3 Depth=1
mov r12d, esi
test r15, r15
je .LBB0_12
.LBB0_10: # %guard_exit126
# in Loop: Header=BB0_3 Depth=1
inc r14
dec r15
mov r13d, ebx
.LBB0_3: # %L36
# =>This Inner Loop Header: Depth=1
movzx edx, byte ptr [r14]
test r13b, 1
movzx edi, r13b
mov ebx, 1
mov ecx, 0
cmove ebx, edi
cmovne edi, ecx
movzx ecx, r10b
lea esi, [rdx - 48]
lea r9d, [rdx - 58]
movzx r8d, sil
cmove r8d, ecx
cmp r9b, -11
ja .LBB0_4
# %bb.5: # %L89
# in Loop: Header=BB0_3 Depth=1
test r11b, 1
jne .LBB0_8
# %bb.6: # %L102
# in Loop: Header=BB0_3 Depth=1
cmp dl, 10
jne .LBB0_7
# %bb.13: # %L106
# in Loop: Header=BB0_3 Depth=1
test r13b, 1
jne .LBB0_14
# %bb.11: # %L114.thread
# in Loop: Header=BB0_3 Depth=1
add ecx, ecx
mov bl, 1
mov r11b, 1
lea ecx, [rcx + 4*rcx]
add cl, r12b
movzx ecx, cl
add rax, rcx
test r15, r15
jne .LBB0_10
jmp .LBB0_12
.p2align 4, 0x90
.LBB0_8: # %L102.thread
# in Loop: Header=BB0_3 Depth=1
mov r11b, 1
# implicit-def: $sil
cmp dl, 10
jne .LBB0_9
jmp .LBB0_15
.LBB0_7: # in Loop: Header=BB0_3 Depth=1
mov esi, r12d
jmp .LBB0_9
.LBB0_1:
xor eax, eax
.LBB0_12: # %L154
mov rcx, qword ptr [rbp - 56]
mov rdx, qword ptr [rbp - 72] # 8-byte Reload
mov qword ptr [rdx], rcx
add rsp, 40
pop rbx
pop r12
pop r13
pop r14
pop r15
pop rbp
ret
.LBB0_15: # %L106.thread
test r13b, 1
jne .LBB0_14
# %bb.16: # %post_box_union47
movabs rax, offset jl_nothing
movabs rcx, offset jl_small_typeof
movabs rdi, offset ".L_j_str_typeassert#1"
mov rdx, qword ptr [rax]
mov rsi, qword ptr [rcx + 336]
movabs rax, offset ijl_type_error
mov qword ptr [rbp - 48], rsi
call rax
.LBB0_14: # %post_box_union
movabs rax, offset jl_nothing
movabs rcx, offset jl_small_typeof
movabs rdi, offset ".L_j_str_typeassert#1"
mov rdx, qword ptr [rax]
mov rsi, qword ptr [rcx + 336]
movabs rax, offset ijl_type_error
mov qword ptr [rbp - 48], rsi
call rax
.Lfunc_end0:
.size julia_part1_1203, .Lfunc_end0-julia_part1_1203
# -- End function
.type ".L_j_str_typeassert#1",@object # @"_j_str_typeassert#1"
.section .rodata.str1.1,"aMS",@progbits,1
".L_j_str_typeassert#1":
.asciz "typeassert"
.size ".L_j_str_typeassert#1", 11
.section ".note.GNU-stack","",@progbits
```
</details>
Co-authored-by: Sukera <[email protected]>
oscardssmith
added a commit
that referenced
this issue
Feb 9, 2024
Adds a convenient way to enable PGO+LTO on Julia and LLVM together:
1. `cd contrib/pgo-lto`
2. `make -j$(nproc) stage1`
3. `make clean-profiles`
4. `./stage1.build/julia -O3 -e 'using Pkg;
Pkg.add("LoopVectorization"); Pkg.test("LoopVectorization")'`
5. `make -j$(nproc) stage2`
<details>
<summary>* Output looks roughly like as follows</summary>
```c++
$ make -C contrib/pgo-lto top
make: Entering directory '/dev/shm/julia/contrib/pgo-lto'
llvm-profdata show --topn=50 /dev/shm/julia/contrib/pgo-lto/profiles/merged.prof | c++filt
Instrumentation level: IR entry_first = 0
Total functions: 85943
Maximum function count: 7867557260
Maximum internal block count: 3468437590
Top 50 functions with the largest internal block counts:
llvm::BitVector::operator|=(llvm::BitVector const&), max count = 7867557260
LateLowerGCFrame::ComputeLiveness(State&), max count = 3468437590
llvm::hashing::detail::hash_combine_recursive_helper::hash_combine_recursive_helper(), max count = 1742259834
llvm::SUnit::addPred(llvm::SDep const&, bool), max count = 511396575
llvm::LiveRange::overlaps(llvm::LiveRange const&, llvm::CoalescerPair const&, llvm::SlotIndexes const&) const, max count = 508061762
llvm::StringMapImpl::LookupBucketFor(llvm::StringRef), max count = 505682177
std::map<llvm::BasicBlock*, BBState, std::less<llvm::BasicBlock*>, std::allocator<std::pair<llvm::BasicBlock* const, BBState> > >::operator[](llvm::BasicBlock* const&), max count = 395628888
llvm::LiveRange::advanceTo(llvm::LiveRange::Segment const*, llvm::SlotIndex) const, max count = 384642728
llvm::LiveRange::isLiveAtIndexes(llvm::ArrayRef<llvm::SlotIndex>) const, max count = 380291040
llvm::PassRegistry::enumerateWith(llvm::PassRegistrationListener*), max count = 352313953
ijl_method_instance_add_backedge, max count = 349608221
llvm::SUnit::ComputeHeight(), max count = 336604330
llvm::LiveRange::advanceTo(llvm::LiveRange::Segment*, llvm::SlotIndex), max count = 331030109
llvm::SmallPtrSetImplBase::insert_imp(void const*), max count = 272966545
llvm::LiveIntervals::checkRegMaskInterference(llvm::LiveInterval&, llvm::BitVector&), max count = 257449540
LateLowerGCFrame::ComputeLiveSets(State&), max count = 252096274
/dev/shm/julia/src/jltypes.c:has_free_typevars, max count = 230879464
ijl_get_pgcstack, max count = 216953592
LateLowerGCFrame::RefineLiveSet(llvm::BitVector&, State&, std::vector<int, std::allocator<int> > const&), max count = 188013152
/dev/shm/julia/src/flisp/flisp.c:apply_cl, max count = 174863813
/dev/shm/julia/src/flisp/builtins.c:fl_memq, max count = 168621603
```
</details>
This results quite often in spectacular speedups for time to first X as
it reduces the time spent in LLVM optimization passes by 25 or even 30%.
Example 1:
```julia
using LoopVectorization
function f!(a, b)
@turbo for i in eachindex(a)
a[i] *= b[i]
end
return a
end
f!(rand(1), rand(1))
```
```console
$ time ./julia -O3 lv.jl
```
Without PGO+LTO: 14.801s
With PGO+LTO: 11.978s (-19%)
Example 2:
```console
$ time ./julia -e 'using Pkg; Pkg.test("Unitful");'
```
Without PGO+LTO: 1m47.688s
With PGO+LTO: 1m35.704s (-11%)
Example 3 (taken from issue #45395, which is almost only LLVM):
```console
$ JULIA_LLVM_ARGS=-time-passes ./julia script-45395.jl
```
Without PGO+LTO:
```
===-------------------------------------------------------------------------===
... Pass execution timing report ...
===-------------------------------------------------------------------------===
Total Execution Time: 101.0130 seconds (98.6253 wall clock)
---User Time--- --System Time-- --User+System-- ---Wall Time--- --- Name ---
53.6961 ( 54.7%) 0.1050 ( 3.8%) 53.8012 ( 53.3%) 53.8045 ( 54.6%) Unroll loops
25.5423 ( 26.0%) 0.0072 ( 0.3%) 25.5495 ( 25.3%) 25.5444 ( 25.9%) Global Value Numbering
7.1995 ( 7.3%) 0.0526 ( 1.9%) 7.2521 ( 7.2%) 7.2517 ( 7.4%) Induction Variable Simplification
6.0541 ( 5.1%) 0.0098 ( 0.3%) 5.0639 ( 5.0%) 5.0561 ( 5.1%) Combine redundant instructions #2
```
With PGO+LTO:
```
===-------------------------------------------------------------------------===
... Pass execution timing report ...
===-------------------------------------------------------------------------===
Total Execution Time: 72.6507 seconds (70.1337 wall clock)
---User Time--- --System Time-- --User+System-- ---Wall Time--- --- Name ---
36.0894 ( 51.7%) 0.0825 ( 2.9%) 36.1719 ( 49.8%) 36.1738 ( 51.6%) Unroll loops
16.5713 ( 23.7%) 0.0129 ( 0.5%) 16.5843 ( 22.8%) 16.5794 ( 23.6%) Global Value Numbering
5.9047 ( 8.5%) 0.0395 ( 1.4%) 5.9442 ( 8.2%) 5.9438 ( 8.5%) Induction Variable Simplification
4.7566 ( 6.8%) 0.0078 ( 0.3%) 4.7645 ( 6.6%) 4.7575 ( 6.8%) Combine redundant instructions #2
```
Or -28% time spent in LLVM.
`perf` reports show this is mostly fewer instructions and reduction in
icache misses.
---
Finally there's a significant reduction in binary sizes. For libLLVM.so:
```
79M usr/lib/libLLVM-13jl.so (before)
67M usr/lib/libLLVM-13jl.so (after)
```
And it can be reduced by another 2MB with `--icf=safe` when using LLD as
a linker anyways.
- [x] Two out-of-source builds would be better than a single in-source
build, so that it's easier to find good profile data
---------
Co-authored-by: Oscar Smith <[email protected]>
Co-authored-by: Lilith Orion Hafner <[email protected]>
2 tasks
Merged
aviatesk
added a commit
that referenced
this issue
Aug 27, 2024
As an application of #55545, this commit avoids the insertion of `:throw_undef_if_not` nodes when the defined-ness of a slot is guaranteed by abstract interpretation. ```julia julia> function isdefined_nothrow(c, x) local val if c val = x end if @isdefined val return val end return zero(Int) end; julia> @code_typed isdefined_nothrow(true, 42) ``` ```diff diff --git a/old b/new index c4980a5c9c..3d1d6d30f0 100644 --- a/old +++ b/new @@ -4,7 +4,6 @@ CodeInfo( 3 ┄ %3 = φ (#2 => x, #1 => #undef)::Int64 │ %4 = φ (#2 => true, #1 => false)::Bool └── goto #5 if not %4 -4 ─ $(Expr(:throw_undef_if_not, :val, :(%4)))::Any -└── return %3 +4 ─ return %3 5 ─ return 0 ) => Int64 ```
aviatesk
added a commit
that referenced
this issue
Aug 29, 2024
As an application of #55545, this commit avoids the insertion of `:throw_undef_if_not` nodes when the defined-ness of a slot is guaranteed by abstract interpretation. ```julia julia> function isdefined_nothrow(c, x) local val if c val = x end if @isdefined val return val end return zero(Int) end; julia> @code_typed isdefined_nothrow(true, 42) ``` ```diff diff --git a/old b/new index c4980a5c9c..3d1d6d30f0 100644 --- a/old +++ b/new @@ -4,7 +4,6 @@ CodeInfo( 3 ┄ %3 = φ (#2 => x, #1 => #undef)::Int64 │ %4 = φ (#2 => true, #1 => false)::Bool └── goto #5 if not %4 -4 ─ $(Expr(:throw_undef_if_not, :val, :(%4)))::Any -└── return %3 +4 ─ return %3 5 ─ return 0 ) => Int64 ```
KristofferC
pushed a commit
that referenced
this issue
Sep 12, 2024
As an application of #55545, this commit avoids the insertion of `:throw_undef_if_not` nodes when the defined-ness of a slot is guaranteed by abstract interpretation. ```julia julia> function isdefined_nothrow(c, x) local val if c val = x end if @isdefined val return val end return zero(Int) end; julia> @code_typed isdefined_nothrow(true, 42) ``` ```diff diff --git a/old b/new index c4980a5c9c..3d1d6d30f0 100644 --- a/old +++ b/new @@ -4,7 +4,6 @@ CodeInfo( 3 ┄ %3 = φ (#2 => x, #1 => #undef)::Int64 │ %4 = φ (#2 => true, #1 => false)::Bool └── goto #5 if not %4 -4 ─ $(Expr(:throw_undef_if_not, :val, :(%4)))::Any -└── return %3 +4 ─ return %3 5 ─ return 0 ) => Int64 ```
vtjnash
added a commit
that referenced
this issue
Sep 17, 2024
Prior to this, especially on macOS, the gc-safepoint here would cause the process to segfault as we had already freed the current_task state. Rearrange this code so that the GC interactions (except for the atomic store to current_task) are all handled before entering GC safe, and then signaling the thread is deleted (via setting current_task = NULL, published by jl_unlock_profile_wr to other threads) is last. ``` ERROR: Exception handler triggered on unmanaged thread. Process 53827 stopped * thread #5, stop reason = EXC_BAD_ACCESS (code=2, address=0x100018008) frame #0: 0x0000000100b74344 libjulia-internal.1.12.0.dylib`jl_delete_thread [inlined] jl_gc_state_set(ptls=0x000000011f8b3200, state='\x02', old_state=<unavailable>) at julia_threads.h:272:9 [opt] 269 assert(old_state != JL_GC_CONCURRENT_COLLECTOR_THREAD); 270 jl_atomic_store_release(&ptls->gc_state, state); 271 if (state == JL_GC_STATE_UNSAFE || old_state == JL_GC_STATE_UNSAFE) -> 272 jl_gc_safepoint_(ptls); 273 return old_state; 274 } 275 STATIC_INLINE int8_t jl_gc_state_save_and_set(jl_ptls_t ptls, Target 0: (julia) stopped. (lldb) up frame #1: 0x0000000100b74320 libjulia-internal.1.12.0.dylib`jl_delete_thread [inlined] jl_gc_state_save_and_set(ptls=0x000000011f8b3200, state='\x02') at julia_threads.h:278:12 [opt] 275 STATIC_INLINE int8_t jl_gc_state_save_and_set(jl_ptls_t ptls, 276 int8_t state) 277 { -> 278 return jl_gc_state_set(ptls, state, jl_atomic_load_relaxed(&ptls->gc_state)); 279 } 280 #ifdef __clang_gcanalyzer__ 281 // these might not be a safepoint (if they are no-op safe=>safe transitions), but we have to assume it could be (statically) (lldb) frame #2: 0x0000000100b7431c libjulia-internal.1.12.0.dylib`jl_delete_thread(value=0x000000011f8b3200) at threading.c:537:11 [opt] 534 ptls->root_task = NULL; 535 jl_free_thread_gc_state(ptls); 536 // then park in safe-region -> 537 (void)jl_gc_safe_enter(ptls); 538 } ```
vtjnash
added a commit
that referenced
this issue
Sep 17, 2024
Prior to this, especially on macOS, the gc-safepoint here would cause the process to segfault as we had already freed the current_task state. Rearrange this code so that the GC interactions (except for the atomic store to current_task) are all handled before entering GC safe, and then signaling the thread is deleted (via setting current_task = NULL, published by jl_unlock_profile_wr to other threads) is last. ``` ERROR: Exception handler triggered on unmanaged thread. Process 53827 stopped * thread #5, stop reason = EXC_BAD_ACCESS (code=2, address=0x100018008) frame #0: 0x0000000100b74344 libjulia-internal.1.12.0.dylib`jl_delete_thread [inlined] jl_gc_state_set(ptls=0x000000011f8b3200, state='\x02', old_state=<unavailable>) at julia_threads.h:272:9 [opt] 269 assert(old_state != JL_GC_CONCURRENT_COLLECTOR_THREAD); 270 jl_atomic_store_release(&ptls->gc_state, state); 271 if (state == JL_GC_STATE_UNSAFE || old_state == JL_GC_STATE_UNSAFE) -> 272 jl_gc_safepoint_(ptls); 273 return old_state; 274 } 275 STATIC_INLINE int8_t jl_gc_state_save_and_set(jl_ptls_t ptls, Target 0: (julia) stopped. (lldb) up frame #1: 0x0000000100b74320 libjulia-internal.1.12.0.dylib`jl_delete_thread [inlined] jl_gc_state_save_and_set(ptls=0x000000011f8b3200, state='\x02') at julia_threads.h:278:12 [opt] 275 STATIC_INLINE int8_t jl_gc_state_save_and_set(jl_ptls_t ptls, 276 int8_t state) 277 { -> 278 return jl_gc_state_set(ptls, state, jl_atomic_load_relaxed(&ptls->gc_state)); 279 } 280 #ifdef __clang_gcanalyzer__ 281 // these might not be a safepoint (if they are no-op safe=>safe transitions), but we have to assume it could be (statically) (lldb) frame #2: 0x0000000100b7431c libjulia-internal.1.12.0.dylib`jl_delete_thread(value=0x000000011f8b3200) at threading.c:537:11 [opt] 534 ptls->root_task = NULL; 535 jl_free_thread_gc_state(ptls); 536 // then park in safe-region -> 537 (void)jl_gc_safe_enter(ptls); 538 } ```
vtjnash
added a commit
that referenced
this issue
Sep 23, 2024
Prior to this, especially on macOS, the gc-safepoint here would cause the process to segfault as we had already freed the current_task state. Rearrange this code so that the GC interactions (except for the atomic store to current_task) are all handled before entering GC safe, and then signaling the thread is deleted (via setting current_task = NULL, published by jl_unlock_profile_wr to other threads) is last. ``` ERROR: Exception handler triggered on unmanaged thread. Process 53827 stopped * thread #5, stop reason = EXC_BAD_ACCESS (code=2, address=0x100018008) frame #0: 0x0000000100b74344 libjulia-internal.1.12.0.dylib`jl_delete_thread [inlined] jl_gc_state_set(ptls=0x000000011f8b3200, state='\x02', old_state=<unavailable>) at julia_threads.h:272:9 [opt] 269 assert(old_state != JL_GC_CONCURRENT_COLLECTOR_THREAD); 270 jl_atomic_store_release(&ptls->gc_state, state); 271 if (state == JL_GC_STATE_UNSAFE || old_state == JL_GC_STATE_UNSAFE) -> 272 jl_gc_safepoint_(ptls); 273 return old_state; 274 } 275 STATIC_INLINE int8_t jl_gc_state_save_and_set(jl_ptls_t ptls, Target 0: (julia) stopped. (lldb) up frame #1: 0x0000000100b74320 libjulia-internal.1.12.0.dylib`jl_delete_thread [inlined] jl_gc_state_save_and_set(ptls=0x000000011f8b3200, state='\x02') at julia_threads.h:278:12 [opt] 275 STATIC_INLINE int8_t jl_gc_state_save_and_set(jl_ptls_t ptls, 276 int8_t state) 277 { -> 278 return jl_gc_state_set(ptls, state, jl_atomic_load_relaxed(&ptls->gc_state)); 279 } 280 #ifdef __clang_gcanalyzer__ 281 // these might not be a safepoint (if they are no-op safe=>safe transitions), but we have to assume it could be (statically) (lldb) frame #2: 0x0000000100b7431c libjulia-internal.1.12.0.dylib`jl_delete_thread(value=0x000000011f8b3200) at threading.c:537:11 [opt] 534 ptls->root_task = NULL; 535 jl_free_thread_gc_state(ptls); 536 // then park in safe-region -> 537 (void)jl_gc_safe_enter(ptls); 538 } ```
vtjnash
added a commit
that referenced
this issue
Oct 10, 2024
Prior to this, especially on macOS, the gc-safepoint here would cause the process to segfault as we had already freed the current_task state. Rearrange this code so that the GC interactions (except for the atomic store to current_task) are all handled before entering GC safe, and then signaling the thread is deleted (via setting current_task = NULL, published by jl_unlock_profile_wr to other threads) is last. ``` ERROR: Exception handler triggered on unmanaged thread. Process 53827 stopped * thread #5, stop reason = EXC_BAD_ACCESS (code=2, address=0x100018008) frame #0: 0x0000000100b74344 libjulia-internal.1.12.0.dylib`jl_delete_thread [inlined] jl_gc_state_set(ptls=0x000000011f8b3200, state='\x02', old_state=<unavailable>) at julia_threads.h:272:9 [opt] 269 assert(old_state != JL_GC_CONCURRENT_COLLECTOR_THREAD); 270 jl_atomic_store_release(&ptls->gc_state, state); 271 if (state == JL_GC_STATE_UNSAFE || old_state == JL_GC_STATE_UNSAFE) -> 272 jl_gc_safepoint_(ptls); 273 return old_state; 274 } 275 STATIC_INLINE int8_t jl_gc_state_save_and_set(jl_ptls_t ptls, Target 0: (julia) stopped. (lldb) up frame #1: 0x0000000100b74320 libjulia-internal.1.12.0.dylib`jl_delete_thread [inlined] jl_gc_state_save_and_set(ptls=0x000000011f8b3200, state='\x02') at julia_threads.h:278:12 [opt] 275 STATIC_INLINE int8_t jl_gc_state_save_and_set(jl_ptls_t ptls, 276 int8_t state) 277 { -> 278 return jl_gc_state_set(ptls, state, jl_atomic_load_relaxed(&ptls->gc_state)); 279 } 280 #ifdef __clang_gcanalyzer__ 281 // these might not be a safepoint (if they are no-op safe=>safe transitions), but we have to assume it could be (statically) (lldb) frame #2: 0x0000000100b7431c libjulia-internal.1.12.0.dylib`jl_delete_thread(value=0x000000011f8b3200) at threading.c:537:11 [opt] 534 ptls->root_task = NULL; 535 jl_free_thread_gc_state(ptls); 536 // then park in safe-region -> 537 (void)jl_gc_safe_enter(ptls); 538 } ```
giordano
pushed a commit
that referenced
this issue
Oct 11, 2024
Prior to this, especially on macOS, the gc-safepoint here would cause the process to segfault as we had already freed the current_task state. Rearrange this code so that the GC interactions (except for the atomic store to current_task) are all handled before entering GC safe, and then signaling the thread is deleted (via setting current_task = NULL, published by jl_unlock_profile_wr to other threads) is last. ``` ERROR: Exception handler triggered on unmanaged thread. Process 53827 stopped * thread #5, stop reason = EXC_BAD_ACCESS (code=2, address=0x100018008) frame #0: 0x0000000100b74344 libjulia-internal.1.12.0.dylib`jl_delete_thread [inlined] jl_gc_state_set(ptls=0x000000011f8b3200, state='\x02', old_state=<unavailable>) at julia_threads.h:272:9 [opt] 269 assert(old_state != JL_GC_CONCURRENT_COLLECTOR_THREAD); 270 jl_atomic_store_release(&ptls->gc_state, state); 271 if (state == JL_GC_STATE_UNSAFE || old_state == JL_GC_STATE_UNSAFE) -> 272 jl_gc_safepoint_(ptls); 273 return old_state; 274 } 275 STATIC_INLINE int8_t jl_gc_state_save_and_set(jl_ptls_t ptls, Target 0: (julia) stopped. (lldb) up frame #1: 0x0000000100b74320 libjulia-internal.1.12.0.dylib`jl_delete_thread [inlined] jl_gc_state_save_and_set(ptls=0x000000011f8b3200, state='\x02') at julia_threads.h:278:12 [opt] 275 STATIC_INLINE int8_t jl_gc_state_save_and_set(jl_ptls_t ptls, 276 int8_t state) 277 { -> 278 return jl_gc_state_set(ptls, state, jl_atomic_load_relaxed(&ptls->gc_state)); 279 } 280 #ifdef __clang_gcanalyzer__ 281 // these might not be a safepoint (if they are no-op safe=>safe transitions), but we have to assume it could be (statically) (lldb) frame #2: 0x0000000100b7431c libjulia-internal.1.12.0.dylib`jl_delete_thread(value=0x000000011f8b3200) at threading.c:537:11 [opt] 534 ptls->root_task = NULL; 535 jl_free_thread_gc_state(ptls); 536 // then park in safe-region -> 537 (void)jl_gc_safe_enter(ptls); 538 } ``` (test incorporated into #55793)
Zentrik
pushed a commit
to Zentrik/julia
that referenced
this issue
Oct 13, 2024
Prior to this, especially on macOS, the gc-safepoint here would cause the process to segfault as we had already freed the current_task state. Rearrange this code so that the GC interactions (except for the atomic store to current_task) are all handled before entering GC safe, and then signaling the thread is deleted (via setting current_task = NULL, published by jl_unlock_profile_wr to other threads) is last. ``` ERROR: Exception handler triggered on unmanaged thread. Process 53827 stopped * thread JuliaLang#5, stop reason = EXC_BAD_ACCESS (code=2, address=0x100018008) frame #0: 0x0000000100b74344 libjulia-internal.1.12.0.dylib`jl_delete_thread [inlined] jl_gc_state_set(ptls=0x000000011f8b3200, state='\x02', old_state=<unavailable>) at julia_threads.h:272:9 [opt] 269 assert(old_state != JL_GC_CONCURRENT_COLLECTOR_THREAD); 270 jl_atomic_store_release(&ptls->gc_state, state); 271 if (state == JL_GC_STATE_UNSAFE || old_state == JL_GC_STATE_UNSAFE) -> 272 jl_gc_safepoint_(ptls); 273 return old_state; 274 } 275 STATIC_INLINE int8_t jl_gc_state_save_and_set(jl_ptls_t ptls, Target 0: (julia) stopped. (lldb) up frame JuliaLang#1: 0x0000000100b74320 libjulia-internal.1.12.0.dylib`jl_delete_thread [inlined] jl_gc_state_save_and_set(ptls=0x000000011f8b3200, state='\x02') at julia_threads.h:278:12 [opt] 275 STATIC_INLINE int8_t jl_gc_state_save_and_set(jl_ptls_t ptls, 276 int8_t state) 277 { -> 278 return jl_gc_state_set(ptls, state, jl_atomic_load_relaxed(&ptls->gc_state)); 279 } 280 #ifdef __clang_gcanalyzer__ 281 // these might not be a safepoint (if they are no-op safe=>safe transitions), but we have to assume it could be (statically) (lldb) frame JuliaLang#2: 0x0000000100b7431c libjulia-internal.1.12.0.dylib`jl_delete_thread(value=0x000000011f8b3200) at threading.c:537:11 [opt] 534 ptls->root_task = NULL; 535 jl_free_thread_gc_state(ptls); 536 // then park in safe-region -> 537 (void)jl_gc_safe_enter(ptls); 538 } ``` (test incorporated into JuliaLang#55793)
maleadt
added a commit
that referenced
this issue
Oct 16, 2024
Rebase and extension of @alexfanqi's initial work on porting Julia to RISC-V. Requires LLVM 19. Tested on a VisionFive2, built with: ```make MARCH := rv64gc_zba_zbb MCPU := sifive-u74 USE_BINARYBUILDER:=0 DEPS_GIT = llvm override LLVM_VER=19.1.1 override LLVM_BRANCH=julia-release/19.x override LLVM_SHA1=julia-release/19.x ``` ```julia-repl ❯ ./julia _ _ _ _(_)_ | Documentation: https://docs.julialang.org (_) | (_) (_) | _ _ _| |_ __ _ | Type "?" for help, "]?" for Pkg help. | | | | | | |/ _` | | | | |_| | | | (_| | | Version 1.12.0-DEV.1374 (2024-10-14) _/ |\__'_|_|_|\__'_| | riscv/25092a3982* (fork: 1 commits, 0 days) |__/ | julia> versioninfo(; verbose=true) Julia Version 1.12.0-DEV.1374 Commit 25092a3* (2024-10-14 09:57 UTC) Platform Info: OS: Linux (riscv64-unknown-linux-gnu) uname: Linux 6.11.3-1-riscv64 #1 SMP Debian 6.11.3-1 (2024-10-10) riscv64 unknown CPU: unknown: speed user nice sys idle irq #1 1500 MHz 922 s 0 s 265 s 160953 s 0 s #2 1500 MHz 457 s 0 s 280 s 161521 s 0 s #3 1500 MHz 452 s 0 s 270 s 160911 s 0 s #4 1500 MHz 638 s 15 s 301 s 161340 s 0 s Memory: 7.760246276855469 GB (7474.08203125 MB free) Uptime: 16260.13 sec Load Avg: 0.25 0.23 0.1 WORD_SIZE: 64 LLVM: libLLVM-19.1.1 (ORCJIT, sifive-u74) Threads: 1 default, 0 interactive, 1 GC (on 4 virtual cores) Environment: HOME = /home/tim PATH = /home/tim/.local/bin:/usr/local/bin:/usr/bin:/bin:/usr/games TERM = xterm-256color julia> ccall(:jl_dump_host_cpu, Nothing, ()) CPU: sifive-u74 Features: +zbb,+d,+i,+f,+c,+a,+zba,+m,-zvbc,-zksed,-zvfhmin,-zbkc,-zkne,-zksh,-zfh,-zfhmin,-zknh,-v,-zihintpause,-zicboz,-zbs,-zvknha,-zvksed,-zfa,-ztso,-zbc,-zvknhb,-zihintntl,-zknd,-zvbb,-zbkx,-zkt,-zvkt,-zicond,-zvksh,-zvfh,-zvkg,-zvkb,-zbkb,-zvkned julia> @code_native debuginfo=:none 1+2. .text .attribute 4, 16 .attribute 5, "rv64i2p1_m2p0_a2p1_f2p2_d2p2_c2p0_zicsr2p0_zifencei2p0_zmmul1p0_zba1p0_zbb1p0" .file "+" .globl "julia_+_3003" .p2align 1 .type "julia_+_3003",@function "julia_+_3003": addi sp, sp, -16 sd ra, 8(sp) sd s0, 0(sp) addi s0, sp, 16 fcvt.d.l fa5, a0 ld ra, 8(sp) ld s0, 0(sp) fadd.d fa0, fa5, fa0 addi sp, sp, 16 ret .Lfunc_end0: .size "julia_+_3003", .Lfunc_end0-"julia_+_3003" .type ".L+Core.Float64#3005",@object .section .data.rel.ro,"aw",@progbits .p2align 3, 0x0 ".L+Core.Float64#3005": .quad ".L+Core.Float64#3005.jit" .size ".L+Core.Float64#3005", 8 .set ".L+Core.Float64#3005.jit", 272467692544 .size ".L+Core.Float64#3005.jit", 8 .section ".note.GNU-stack","",@progbits ``` Lots of bugs guaranteed, but with this we at least have a functional build and REPL for further development by whoever is interested. Also requires Linux 6.4+, since the fallback processor detection used here relies on LLVM's `sys::getHostCPUFeatures`, which for RISC-V is implemented using hwprobe introduced in 6.4. We could probably add a fallback that parses `/proc/cpuinfo`, either by building a CPU database much like how we've done for AArch64, or by parsing the actual ISA string contained there. That would probably also be a good place to add support for profiles, which are supposedly the way forward to package RISC-V binaries. That can happen in follow-up PRs though. For now, on older kernels, use the `-C` arg to Julia to specify an ISA. Co-authored-by: Alex Fan <[email protected]>
6 tasks
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
The current implementation is frankly embarrassing.
The text was updated successfully, but these errors were encountered: