Add CONFIG_TMPFS_POSIX_ACL=y #31
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Fixes: | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[220]: Failed to apply ACL on /dev/v4l-subdev0: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[224]: Failed to apply ACL on /dev/v4l-subdev1: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[215]: Failed to apply ACL on /dev/v4l-subdev10: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[228]: Failed to apply ACL on /dev/v4l-subdev2: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[232]: Failed to apply ACL on /dev/v4l-subdev5: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[217]: Failed to apply ACL on /dev/v4l-subdev11: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[214]: Failed to apply ACL on /dev/dri/card1: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[216]: Failed to apply ACL on /dev/v4l-subdev8: Operation not supported | Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[226]: Failed to apply ACL on /dev/v4l-subdev9: Operation not supported and nasty follow-ups: Starting weston from sddm as unpriviledged user fails with some hints on missing access rights. For a better understanding CONFIG_TMPFS=y was added which was set indirectly by CONFIG_DEVTMPFS=y Signed-off-by: Andreas Müller <[email protected]>
chainq
pushed a commit
to coderetro/linux-fslc
that referenced
this pull request
Jan 10, 2019
[ Upstream commit 4b19067 ] When attempt to read tpc_stats for the chipsets which support more than 3 tx chain will trigger kernel panic(kernel stack is corrupted) due to writing values on rate_code array out of range. This patch changes the array size depends on the WMI_TPC_TX_N_CHAIN and added check to avoid write values on the array if the num tx chain get in tpc config event is greater than WMI_TPC_TX_N_CHAIN. Tested on QCA9984 with firmware-5.bin_10.4-3.5.3-00057 Kernel panic log : [ 323.510944] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: bf90c654 [ 323.510944] [ 323.524390] CPU: 0 PID: 1908 Comm: cat Not tainted 3.14.77 Freescale#31 [ 323.530224] [<c021db48>] (unwind_backtrace) from [<c021ac08>] (show_stack+0x10/0x14) [ 323.537941] [<c021ac08>] (show_stack) from [<c03c53c0>] (dump_stack+0x80/0xa0) [ 323.545146] [<c03c53c0>] (dump_stack) from [<c022e4ac>] (panic+0x84/0x1e4) [ 323.552000] [<c022e4ac>] (panic) from [<c022e61c>] (__stack_chk_fail+0x10/0x14) [ 323.559350] [<c022e61c>] (__stack_chk_fail) from [<bf90c654>] (ath10k_wmi_event_pdev_tpc_config+0x424/0x438 [ath10k_core]) [ 323.570471] [<bf90c654>] (ath10k_wmi_event_pdev_tpc_config [ath10k_core]) from [<bf90d800>] (ath10k_wmi_10_4_op_rx+0x2f0/0x39c [ath10k_core]) [ 323.583047] [<bf90d800>] (ath10k_wmi_10_4_op_rx [ath10k_core]) from [<bf8fcc18>] (ath10k_htc_rx_completion_handler+0x170/0x1a0 [ath10k_core]) [ 323.595702] [<bf8fcc18>] (ath10k_htc_rx_completion_handler [ath10k_core]) from [<bf961f44>] (ath10k_pci_hif_send_complete_check+0x1f0/0x220 [ath10k_pci]) [ 323.609421] [<bf961f44>] (ath10k_pci_hif_send_complete_check [ath10k_pci]) from [<bf96562c>] (ath10k_ce_per_engine_service+0x74/0xc4 [ath10k_pci]) [ 323.622490] [<bf96562c>] (ath10k_ce_per_engine_service [ath10k_pci]) from [<bf9656f0>] (ath10k_ce_per_engine_service_any+0x74/0x80 [ath10k_pci]) [ 323.635423] [<bf9656f0>] (ath10k_ce_per_engine_service_any [ath10k_pci]) from [<bf96365c>] (ath10k_pci_napi_poll+0x44/0xe8 [ath10k_pci]) [ 323.647665] [<bf96365c>] (ath10k_pci_napi_poll [ath10k_pci]) from [<c0599994>] (net_rx_action+0xac/0x160) [ 323.657208] [<c0599994>] (net_rx_action) from [<c02324a4>] (__do_softirq+0x104/0x294) [ 323.665017] [<c02324a4>] (__do_softirq) from [<c0232920>] (irq_exit+0x9c/0x11c) [ 323.672314] [<c0232920>] (irq_exit) from [<c0217fc0>] (handle_IRQ+0x6c/0x90) [ 323.679341] [<c0217fc0>] (handle_IRQ) from [<c02084e0>] (gic_handle_irq+0x3c/0x60) [ 323.686893] [<c02084e0>] (gic_handle_irq) from [<c02095c0>] (__irq_svc+0x40/0x70) [ 323.694349] Exception stack(0xdd489c58 to 0xdd489ca0) [ 323.699384] 9c40: 00000000 a0000013 [ 323.707547] 9c60: 00000000 dc4bce40 60000013 ddc1d800 dd488000 00000990 00000000 c085c800 [ 323.715707] 9c80: 00000000 dd489d44 0000092d dd489ca0 c026e664 c026e668 60000013 ffffffff [ 323.723877] [<c02095c0>] (__irq_svc) from [<c026e668>] (rcu_note_context_switch+0x170/0x184) [ 323.732298] [<c026e668>] (rcu_note_context_switch) from [<c020e928>] (__schedule+0x50/0x4d4) [ 323.740716] [<c020e928>] (__schedule) from [<c020e490>] (schedule_timeout+0x148/0x178) [ 323.748611] [<c020e490>] (schedule_timeout) from [<c020f804>] (wait_for_common+0x114/0x154) [ 323.756972] [<c020f804>] (wait_for_common) from [<bf8f6ef0>] (ath10k_tpc_stats_open+0xc8/0x340 [ath10k_core]) [ 323.766873] [<bf8f6ef0>] (ath10k_tpc_stats_open [ath10k_core]) from [<c02bb598>] (do_dentry_open+0x1ac/0x274) [ 323.776741] [<c02bb598>] (do_dentry_open) from [<c02c838c>] (do_last+0x8c0/0xb08) [ 323.784201] [<c02c838c>] (do_last) from [<c02c87e4>] (path_openat+0x210/0x598) [ 323.791408] [<c02c87e4>] (path_openat) from [<c02c9d1c>] (do_filp_open+0x2c/0x78) [ 323.798873] [<c02c9d1c>] (do_filp_open) from [<c02bc85c>] (do_sys_open+0x114/0x1b4) [ 323.806509] [<c02bc85c>] (do_sys_open) from [<c0208c80>] (ret_fast_syscall+0x0/0x44) [ 323.814241] CPU1: stopping [ 323.816927] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.14.77 Freescale#31 [ 323.823008] [<c021db48>] (unwind_backtrace) from [<c021ac08>] (show_stack+0x10/0x14) [ 323.830731] [<c021ac08>] (show_stack) from [<c03c53c0>] (dump_stack+0x80/0xa0) [ 323.837934] [<c03c53c0>] (dump_stack) from [<c021cfac>] (handle_IPI+0xb8/0x140) [ 323.845224] [<c021cfac>] (handle_IPI) from [<c02084fc>] (gic_handle_irq+0x58/0x60) [ 323.852774] [<c02084fc>] (gic_handle_irq) from [<c02095c0>] (__irq_svc+0x40/0x70) [ 323.860233] Exception stack(0xdd499fa0 to 0xdd499fe8) [ 323.865273] 9fa0: ffffffed 00000000 1d3c9000 00000000 dd498000 dd498030 10c0387d c08b62c8 [ 323.873432] 9fc0: 4220406a 512f04d0 00000000 00000000 00000001 dd499fe8 c021838c c0218390 [ 323.881588] 9fe0: 60000013 ffffffff [ 323.885070] [<c02095c0>] (__irq_svc) from [<c0218390>] (arch_cpu_idle+0x30/0x50) [ 323.892454] [<c0218390>] (arch_cpu_idle) from [<c026500c>] (cpu_startup_entry+0xa4/0x108) [ 323.900690] [<c026500c>] (cpu_startup_entry) from [<422085a4>] (0x422085a4) Signed-off-by: Tamizh chelvam <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
schnitzeltony
pushed a commit
to schnitzeltony/linux-fslc
that referenced
this pull request
May 23, 2019
commit a3eec13 upstream. When using direct commands (DCMDs) on an RK3399, we get spurious CQE completion interrupts for the DCMD transaction slot (Freescale#31): [ 931.196520] ------------[ cut here ]------------ [ 931.201702] mmc1: cqhci: spurious TCN for tag 31 [ 931.206906] WARNING: CPU: 0 PID: 1433 at /usr/src/kernel/drivers/mmc/host/cqhci.c:725 cqhci_irq+0x2e4/0x490 [ 931.206909] Modules linked in: [ 931.206918] CPU: 0 PID: 1433 Comm: irq/29-mmc1 Not tainted 4.19.8-rt6-funkadelic Freescale#1 [ 931.206920] Hardware name: Theobroma Systems RK3399-Q7 SoM (DT) [ 931.206924] pstate: 40000005 (nZcv daif -PAN -UAO) [ 931.206927] pc : cqhci_irq+0x2e4/0x490 [ 931.206931] lr : cqhci_irq+0x2e4/0x490 [ 931.206933] sp : ffff00000e54bc80 [ 931.206934] x29: ffff00000e54bc80 x28: 0000000000000000 [ 931.206939] x27: 0000000000000001 x26: ffff000008f217e8 [ 931.206944] x25: ffff8000f02ef030 x24: ffff0000091417b0 [ 931.206948] x23: ffff0000090aa000 x22: ffff8000f008b000 [ 931.206953] x21: 0000000000000002 x20: 000000000000001f [ 931.206957] x19: ffff8000f02ef018 x18: ffffffffffffffff [ 931.206961] x17: 0000000000000000 x16: 0000000000000000 [ 931.206966] x15: ffff0000090aa6c8 x14: 0720072007200720 [ 931.206970] x13: 0720072007200720 x12: 0720072007200720 [ 931.206975] x11: 0720072007200720 x10: 0720072007200720 [ 931.206980] x9 : 0720072007200720 x8 : 0720072007200720 [ 931.206984] x7 : 0720073107330720 x6 : 00000000000005a0 [ 931.206988] x5 : ffff00000860d4b0 x4 : 0000000000000000 [ 931.206993] x3 : 0000000000000001 x2 : 0000000000000001 [ 931.206997] x1 : 1bde3a91b0d4d900 x0 : 0000000000000000 [ 931.207001] Call trace: [ 931.207005] cqhci_irq+0x2e4/0x490 [ 931.207009] sdhci_arasan_cqhci_irq+0x5c/0x90 [ 931.207013] sdhci_irq+0x98/0x930 [ 931.207019] irq_forced_thread_fn+0x2c/0xa0 [ 931.207023] irq_thread+0x114/0x1c0 [ 931.207027] kthread+0x128/0x130 [ 931.207032] ret_from_fork+0x10/0x20 [ 931.207035] ---[ end trace 0000000000000002 ]--- The driver shows this message only for the first spurious interrupt by using WARN_ONCE(). Changing this to WARN() shows, that this is happening quite frequently (up to once a second). Since the eMMC 5.1 specification, where CQE and CQHCI are specified, does not mention that spurious TCN interrupts for DCMDs can be simply ignored, we must assume that using this feature is not working reliably. The current implementation uses DCMD for REQ_OP_FLUSH only, and I could not see any performance/power impact when disabling this optional feature for RK3399. Therefore this patch disables DCMDs for RK3399. Signed-off-by: Christoph Muellner <[email protected]> Signed-off-by: Philipp Tomsich <[email protected]> Fixes: 84362d7 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1") Cc: [email protected] [the corresponding code changes are queued for 5.2 so doing that as well] Signed-off-by: Heiko Stuebner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
otavio
pushed a commit
that referenced
this pull request
May 30, 2019
commit a3eec13 upstream. When using direct commands (DCMDs) on an RK3399, we get spurious CQE completion interrupts for the DCMD transaction slot (#31): [ 931.196520] ------------[ cut here ]------------ [ 931.201702] mmc1: cqhci: spurious TCN for tag 31 [ 931.206906] WARNING: CPU: 0 PID: 1433 at /usr/src/kernel/drivers/mmc/host/cqhci.c:725 cqhci_irq+0x2e4/0x490 [ 931.206909] Modules linked in: [ 931.206918] CPU: 0 PID: 1433 Comm: irq/29-mmc1 Not tainted 4.19.8-rt6-funkadelic #1 [ 931.206920] Hardware name: Theobroma Systems RK3399-Q7 SoM (DT) [ 931.206924] pstate: 40000005 (nZcv daif -PAN -UAO) [ 931.206927] pc : cqhci_irq+0x2e4/0x490 [ 931.206931] lr : cqhci_irq+0x2e4/0x490 [ 931.206933] sp : ffff00000e54bc80 [ 931.206934] x29: ffff00000e54bc80 x28: 0000000000000000 [ 931.206939] x27: 0000000000000001 x26: ffff000008f217e8 [ 931.206944] x25: ffff8000f02ef030 x24: ffff0000091417b0 [ 931.206948] x23: ffff0000090aa000 x22: ffff8000f008b000 [ 931.206953] x21: 0000000000000002 x20: 000000000000001f [ 931.206957] x19: ffff8000f02ef018 x18: ffffffffffffffff [ 931.206961] x17: 0000000000000000 x16: 0000000000000000 [ 931.206966] x15: ffff0000090aa6c8 x14: 0720072007200720 [ 931.206970] x13: 0720072007200720 x12: 0720072007200720 [ 931.206975] x11: 0720072007200720 x10: 0720072007200720 [ 931.206980] x9 : 0720072007200720 x8 : 0720072007200720 [ 931.206984] x7 : 0720073107330720 x6 : 00000000000005a0 [ 931.206988] x5 : ffff00000860d4b0 x4 : 0000000000000000 [ 931.206993] x3 : 0000000000000001 x2 : 0000000000000001 [ 931.206997] x1 : 1bde3a91b0d4d900 x0 : 0000000000000000 [ 931.207001] Call trace: [ 931.207005] cqhci_irq+0x2e4/0x490 [ 931.207009] sdhci_arasan_cqhci_irq+0x5c/0x90 [ 931.207013] sdhci_irq+0x98/0x930 [ 931.207019] irq_forced_thread_fn+0x2c/0xa0 [ 931.207023] irq_thread+0x114/0x1c0 [ 931.207027] kthread+0x128/0x130 [ 931.207032] ret_from_fork+0x10/0x20 [ 931.207035] ---[ end trace 0000000000000002 ]--- The driver shows this message only for the first spurious interrupt by using WARN_ONCE(). Changing this to WARN() shows, that this is happening quite frequently (up to once a second). Since the eMMC 5.1 specification, where CQE and CQHCI are specified, does not mention that spurious TCN interrupts for DCMDs can be simply ignored, we must assume that using this feature is not working reliably. The current implementation uses DCMD for REQ_OP_FLUSH only, and I could not see any performance/power impact when disabling this optional feature for RK3399. Therefore this patch disables DCMDs for RK3399. Signed-off-by: Christoph Muellner <[email protected]> Signed-off-by: Philipp Tomsich <[email protected]> Fixes: 84362d7 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1") Cc: [email protected] [the corresponding code changes are queued for 5.2 so doing that as well] Signed-off-by: Heiko Stuebner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
schnitzeltony
pushed a commit
to schnitzeltony/linux-fslc
that referenced
this pull request
Aug 12, 2019
[ Upstream commit 33d4a5a ] Setting invalid value to /sys/devices/system/cpu/cpuX/hotplug/fail can control `struct cpuhp_step *sp` address, results in the following global-out-of-bounds read. Reproducer: # echo -2 > /sys/devices/system/cpu/cpu0/hotplug/fail KASAN report: BUG: KASAN: global-out-of-bounds in write_cpuhp_fail+0x2cd/0x2e0 Read of size 8 at addr ffffffff89734438 by task bash/1941 CPU: 0 PID: 1941 Comm: bash Not tainted 5.2.0-rc6+ Freescale#31 Call Trace: write_cpuhp_fail+0x2cd/0x2e0 dev_attr_store+0x58/0x80 sysfs_kf_write+0x13d/0x1a0 kernfs_fop_write+0x2bc/0x460 vfs_write+0x1e1/0x560 ksys_write+0x126/0x250 do_syscall_64+0xc1/0x390 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f05e4f4c970 The buggy address belongs to the variable: cpu_hotplug_lock+0x98/0xa0 Memory state around the buggy address: ffffffff89734300: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00 ffffffff89734380: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffff89734400: 00 00 00 00 fa fa fa fa 00 00 00 00 fa fa fa fa ^ ffffffff89734480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffff89734500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Add a sanity check for the value written from user space. Fixes: 1db4948 ("smp/hotplug: Hotplug state fail injection") Signed-off-by: Eiichi Tsukata <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Apr 30, 2020
commit e5b72e3 upstream. Due to some hardware issues, queue 31 isn't usable on devices that have 32 queues (7000, 8000, 9000 families), which is correctly reflected in the configuration and TX queue initialization. However, the firmware API and queue allocation code assumes that there are 32 queues, and if something actually attempts to use Freescale#31 this leads to a NULL-pointer dereference since it's not allocated. Fix this by limiting to 31 in the IWL_MVM_DQA_MAX_DATA_QUEUE, and also add some code to catch this earlier in the future, if the configuration changes perhaps. Cc: [email protected] # v4.9+ Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20200417100405.98a79be2db6a.I3a4af6b03b87a6bc18db9b1ff9a812f397bee1fc@changeid Signed-off-by: Greg Kroah-Hartman <[email protected]>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Oct 1, 2020
[ Upstream commit 96298f6 ] According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5, the incoming L2CAP_ConfigReq should be handled during OPEN state. The section below shows the btmon trace when running L2CAP/COS/CFD/BV-12-C before and after this change. === Before === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 Freescale#22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 Freescale#23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 Freescale#24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 Freescale#27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 Freescale#28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 Freescale#30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 Freescale#31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ...... < ACL Data TX: Handle 256 flags 0x00 dlen 14 Freescale#32 L2CAP: Command Reject (0x01) ident 3 len 6 Reason: Invalid CID in request (0x0002) Destination CID: 64 Source CID: 65 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#33 Num handles: 1 Handle: 256 Count: 1 ... === After === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 Freescale#22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 Freescale#23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 Freescale#24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 Freescale#27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 Freescale#28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 Freescale#30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 Freescale#31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ..... < ACL Data TX: Handle 256 flags 0x00 dlen 18 Freescale#32 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 < ACL Data TX: Handle 256 flags 0x00 dlen 12 Freescale#33 L2CAP: Configure Request (0x04) ident 3 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#34 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#35 Num handles: 1 Handle: 256 Count: 1 ... Signed-off-by: Howard Chung <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
LeBlue
pushed a commit
to LeBlue/linux-fslc
that referenced
this pull request
Oct 23, 2020
[ Upstream commit 96298f6 ] According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5, the incoming L2CAP_ConfigReq should be handled during OPEN state. The section below shows the btmon trace when running L2CAP/COS/CFD/BV-12-C before and after this change. === Before === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 Freescale#22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 Freescale#23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 Freescale#24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 Freescale#27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 Freescale#28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 Freescale#30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 Freescale#31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ...... < ACL Data TX: Handle 256 flags 0x00 dlen 14 Freescale#32 L2CAP: Command Reject (0x01) ident 3 len 6 Reason: Invalid CID in request (0x0002) Destination CID: 64 Source CID: 65 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#33 Num handles: 1 Handle: 256 Count: 1 ... === After === ... > ACL Data RX: Handle 256 flags 0x02 dlen 12 Freescale#22 L2CAP: Connection Request (0x02) ident 2 len 4 PSM: 1 (0x0001) Source CID: 65 < ACL Data TX: Handle 256 flags 0x00 dlen 16 Freescale#23 L2CAP: Connection Response (0x03) ident 2 len 8 Destination CID: 64 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 256 flags 0x00 dlen 12 Freescale#24 L2CAP: Configure Request (0x04) ident 2 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#25 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#26 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 16 Freescale#27 L2CAP: Configure Request (0x04) ident 3 len 8 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 .. < ACL Data TX: Handle 256 flags 0x00 dlen 18 Freescale#28 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#29 Num handles: 1 Handle: 256 Count: 1 > ACL Data RX: Handle 256 flags 0x02 dlen 14 Freescale#30 L2CAP: Configure Response (0x05) ident 2 len 6 Source CID: 64 Flags: 0x0000 Result: Success (0x0000) > ACL Data RX: Handle 256 flags 0x02 dlen 20 Freescale#31 L2CAP: Configure Request (0x04) ident 3 len 12 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [hint] 01 00 91 02 11 11 ..... < ACL Data TX: Handle 256 flags 0x00 dlen 18 Freescale#32 L2CAP: Configure Response (0x05) ident 3 len 10 Source CID: 65 Flags: 0x0000 Result: Success (0x0000) Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 672 < ACL Data TX: Handle 256 flags 0x00 dlen 12 Freescale#33 L2CAP: Configure Request (0x04) ident 3 len 4 Destination CID: 65 Flags: 0x0000 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#34 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 Freescale#35 Num handles: 1 Handle: 256 Count: 1 ... Signed-off-by: Howard Chung <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Jan 3, 2021
…_kfree [ Upstream commit 9905f72 ] The mhu_db_channel info is allocated per channel using devm_kzalloc from mhu_db_mbox_xlate which gets called from mbox_request_channel. However we are releasing the allocated mhu_db_channel info using plain kfree from mhu_db_shutdown which is called from mbox_free_channel. This leads to random crashes when the channel is freed like below one: Unable to handle kernel paging request at virtual address 0080000400000008 [0080000400000008] address between user and kernel address ranges Internal error: Oops: 96000044 [Freescale#1] PREEMPT SMP Modules linked in: scmi_module(-) CPU: 1 PID: 2212 Comm: rmmod Not tainted 5.10.0-rc5 Freescale#31 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Nov 19 2020 pstate: 20000085 (nzCv daIf -PAN -UAO -TCO BTYPE=--) pc : release_nodes+0x74/0x230 lr : devres_release_all+0x40/0x68 Call trace: release_nodes+0x74/0x230 devres_release_all+0x40/0x68 device_release_driver_internal+0x12c/0x1f8 driver_detach+0x58/0xe8 bus_remove_driver+0x64/0xe0 driver_unregister+0x38/0x68 platform_driver_unregister+0x1c/0x28 scmi_driver_exit+0x38/0x44 [scmi_module] __arm64_sys_delete_module+0x188/0x260 el0_svc_common.constprop.0+0x80/0x1a8 do_el0_svc+0x2c/0x98 el0_sync_handler+0x160/0x168 el0_sync+0x174/0x180 Code: 1400000d eb07009f 54000460 f9400486 (f90004a6) ---[ end trace c55ffd306c140233 ]--- Fix it by replacing kfree with devm_kfree as required. Fixes: 7002ca2 ("mailbox: arm_mhu: Add ARM MHU doorbell driver") Reported-by: Cristian Marussi <[email protected]> Signed-off-by: Sudeep Holla <[email protected]> Tested-by: Cristian Marussi <[email protected]> Reviewed-by: Cristian Marussi <[email protected]> Signed-off-by: Jassi Brar <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Jan 3, 2021
…ext bug [ Upstream commit 3e47495 ] With lockdep enabled, we will get following warning: ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) BUG: sleeping function called from invalid context at kernel/locking/mutex.c:935 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 18, name: kworker/0:1 INFO: lockdep is turned off. irq event stamp: 602 hardirqs last enabled at (601): [<8073fde0>] _raw_spin_unlock_irq+0x3c/0x80 hardirqs last disabled at (602): [<8073a4f4>] __schedule+0x184/0x800 softirqs last enabled at (0): [<80080f60>] copy_process+0x578/0x14c8 softirqs last disabled at (0): [<00000000>] 0x0 CPU: 0 PID: 18 Comm: kworker/0:1 Not tainted 5.10.0-rc3-ar9331-00734-g7d644991df0c Freescale#31 Workqueue: events deferred_probe_work_func Stack : 80980000 80980000 8089ef70 80890000 804b5414 80980000 00000002 80b53728 00000000 800d1268 804b5414 ffffffde 00000017 800afe08 81943860 0f5bfc32 00000000 00000000 8089ef70 819436c0 ffffffea 00000000 00000000 00000000 8194390c 808e353c 0000000f 66657272 80980000 00000000 00000000 80890000 804b5414 80980000 00000002 80b53728 00000000 00000000 00000000 80d40000 ... Call Trace: [<80069ce0>] show_stack+0x9c/0x140 [<800afe08>] ___might_sleep+0x220/0x244 [<8073bfb0>] __mutex_lock+0x70/0x374 [<8073c2e0>] mutex_lock_nested+0x2c/0x38 [<804b5414>] regmap_update_bits_base+0x38/0x8c [<804ee584>] regmap_update_bits+0x1c/0x28 [<804ee714>] ar9331_sw_unmask_irq+0x34/0x60 [<800d91f0>] unmask_irq+0x48/0x70 [<800d93d4>] irq_startup+0x114/0x11c [<800d65b4>] __setup_irq+0x4f4/0x6d0 [<800d68a0>] request_threaded_irq+0x110/0x190 [<804e3ef0>] phy_request_interrupt+0x4c/0xe4 [<804df508>] phylink_bringup_phy+0x2c0/0x37c [<804df7bc>] phylink_of_phy_connect+0x118/0x130 [<806c1a64>] dsa_slave_create+0x3d0/0x578 [<806bc4ec>] dsa_register_switch+0x934/0xa20 [<804eef98>] ar9331_sw_probe+0x34c/0x364 [<804eb48c>] mdio_probe+0x44/0x70 [<8049e3b4>] really_probe+0x30c/0x4f4 [<8049ea10>] driver_probe_device+0x264/0x26c [<8049bc10>] bus_for_each_drv+0xb4/0xd8 [<8049e684>] __device_attach+0xe8/0x18c [<8049ce58>] bus_probe_device+0x48/0xc4 [<8049db70>] deferred_probe_work_func+0xdc/0xf8 [<8009ff64>] process_one_work+0x2e4/0x4a0 [<800a0770>] worker_thread+0x2a8/0x354 [<800a774c>] kthread+0x16c/0x174 [<8006306c>] ret_from_kernel_thread+0x14/0x1c ar9331_switch ethernet.1:10 lan1 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:02] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) DSA: tree 0 setup To fix it, it is better to move access to MDIO register to the .irq_bus_sync_unlock call back. Fixes: ec6698c ("net: dsa: add support for Atheros AR9331 built-in switch") Signed-off-by: Oleksij Rempel <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
May 14, 2021
[ Upstream commit 0f20615 ] Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable bitfields. Missing breaks in a switch caused 8-byte reads always. This can confuse libbpf because it does strict checks that memory load size corresponds to the original size of the field, which in this case quite often would be wrong. After fixing that, we run into another problem, which quite subtle, so worth documenting here. The issue is in Clang optimization and CO-RE relocation interactions. Without that asm volatile construct (also known as barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and will apply BYTE_OFFSET 4 times for each switch case arm. This will result in the same error from libbpf about mismatch of memory load size and original field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *), *(u32 *), and *(u64 *) memory loads, three of which will fail. Using barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to calculate p, after which value of p is used without relocation in each of switch case arms, doing appropiately-sized memory load. Here's the list of relevant relocations and pieces of generated BPF code before and after this patch for test_core_reloc_bitfields_direct selftests. BEFORE ===== Freescale#45: core_reloc: insn Freescale#160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 Freescale#46: core_reloc: insn Freescale#167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 Freescale#47: core_reloc: insn Freescale#174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 Freescale#48: core_reloc: insn Freescale#178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 Freescale#49: core_reloc: insn Freescale#182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 157: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 159: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 160: b7 02 00 00 04 00 00 00 r2 = 4 ; BYTE_SIZE relocation here ^^^ 161: 66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63> 162: 16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65> 163: 16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66> 164: 05 00 12 00 00 00 00 00 goto +18 <LBB0_69> 0000000000000528 <LBB0_66>: 165: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 167: 69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 168: 05 00 0e 00 00 00 00 00 goto +14 <LBB0_69> 0000000000000548 <LBB0_63>: 169: 16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67> 170: 16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68> 171: 05 00 0b 00 00 00 00 00 goto +11 <LBB0_69> 0000000000000560 <LBB0_68>: 172: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 174: 79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 175: 05 00 07 00 00 00 00 00 goto +7 <LBB0_69> 0000000000000580 <LBB0_65>: 176: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 178: 71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 179: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 00000000000005a0 <LBB0_67>: 180: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 182: 61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8) ; BYTE_OFFSET relo here w/ RIGHT size ^^^^^^^^^^^^^^^^ 00000000000005b8 <LBB0_69>: 183: 67 01 00 00 20 00 00 00 r1 <<= 32 184: b7 02 00 00 00 00 00 00 r2 = 0 185: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 186: c7 01 00 00 20 00 00 00 r1 s>>= 32 187: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000005e0 <LBB0_71>: 188: 77 01 00 00 20 00 00 00 r1 >>= 32 AFTER ===== Freescale#30: core_reloc: insn Freescale#132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 Freescale#31: core_reloc: insn Freescale#134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 129: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 131: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 132: b7 01 00 00 08 00 00 00 r1 = 8 ; BYTE_OFFSET relo here ^^^ ; no size check for non-memory dereferencing instructions 133: 0f 12 00 00 00 00 00 00 r2 += r1 134: b7 03 00 00 04 00 00 00 r3 = 4 ; BYTE_SIZE relocation here ^^^ 135: 66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63> 136: 16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65> 137: 16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66> 138: 05 00 0a 00 00 00 00 00 goto +10 <LBB0_69> 0000000000000458 <LBB0_66>: 139: 69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 140: 05 00 08 00 00 00 00 00 goto +8 <LBB0_69> 0000000000000468 <LBB0_63>: 141: 16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67> 142: 16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68> 143: 05 00 05 00 00 00 00 00 goto +5 <LBB0_69> 0000000000000480 <LBB0_68>: 144: 79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 145: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 0000000000000490 <LBB0_65>: 146: 71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 147: 05 00 01 00 00 00 00 00 goto +1 <LBB0_69> 00000000000004a0 <LBB0_67>: 148: 61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 00000000000004a8 <LBB0_69>: 149: 67 01 00 00 20 00 00 00 r1 <<= 32 150: b7 02 00 00 00 00 00 00 r2 = 0 151: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 152: c7 01 00 00 20 00 00 00 r1 s>>= 32 153: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000004d0 <LBB0_71>: 154: 77 01 00 00 20 00 00 00 r1 >>= 323 Fixes: ee26dad ("libbpf: Add support for relocatable bitfields") Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Lorenz Bauer <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
May 14, 2021
[ Upstream commit 0f20615 ] Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable bitfields. Missing breaks in a switch caused 8-byte reads always. This can confuse libbpf because it does strict checks that memory load size corresponds to the original size of the field, which in this case quite often would be wrong. After fixing that, we run into another problem, which quite subtle, so worth documenting here. The issue is in Clang optimization and CO-RE relocation interactions. Without that asm volatile construct (also known as barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and will apply BYTE_OFFSET 4 times for each switch case arm. This will result in the same error from libbpf about mismatch of memory load size and original field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *), *(u32 *), and *(u64 *) memory loads, three of which will fail. Using barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to calculate p, after which value of p is used without relocation in each of switch case arms, doing appropiately-sized memory load. Here's the list of relevant relocations and pieces of generated BPF code before and after this patch for test_core_reloc_bitfields_direct selftests. BEFORE ===== Freescale#45: core_reloc: insn Freescale#160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 Freescale#46: core_reloc: insn Freescale#167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 Freescale#47: core_reloc: insn Freescale#174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 Freescale#48: core_reloc: insn Freescale#178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 Freescale#49: core_reloc: insn Freescale#182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 157: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 159: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 160: b7 02 00 00 04 00 00 00 r2 = 4 ; BYTE_SIZE relocation here ^^^ 161: 66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63> 162: 16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65> 163: 16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66> 164: 05 00 12 00 00 00 00 00 goto +18 <LBB0_69> 0000000000000528 <LBB0_66>: 165: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 167: 69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 168: 05 00 0e 00 00 00 00 00 goto +14 <LBB0_69> 0000000000000548 <LBB0_63>: 169: 16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67> 170: 16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68> 171: 05 00 0b 00 00 00 00 00 goto +11 <LBB0_69> 0000000000000560 <LBB0_68>: 172: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 174: 79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 175: 05 00 07 00 00 00 00 00 goto +7 <LBB0_69> 0000000000000580 <LBB0_65>: 176: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 178: 71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 179: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 00000000000005a0 <LBB0_67>: 180: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 182: 61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8) ; BYTE_OFFSET relo here w/ RIGHT size ^^^^^^^^^^^^^^^^ 00000000000005b8 <LBB0_69>: 183: 67 01 00 00 20 00 00 00 r1 <<= 32 184: b7 02 00 00 00 00 00 00 r2 = 0 185: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 186: c7 01 00 00 20 00 00 00 r1 s>>= 32 187: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000005e0 <LBB0_71>: 188: 77 01 00 00 20 00 00 00 r1 >>= 32 AFTER ===== Freescale#30: core_reloc: insn Freescale#132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 Freescale#31: core_reloc: insn Freescale#134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 129: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 131: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 132: b7 01 00 00 08 00 00 00 r1 = 8 ; BYTE_OFFSET relo here ^^^ ; no size check for non-memory dereferencing instructions 133: 0f 12 00 00 00 00 00 00 r2 += r1 134: b7 03 00 00 04 00 00 00 r3 = 4 ; BYTE_SIZE relocation here ^^^ 135: 66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63> 136: 16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65> 137: 16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66> 138: 05 00 0a 00 00 00 00 00 goto +10 <LBB0_69> 0000000000000458 <LBB0_66>: 139: 69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 140: 05 00 08 00 00 00 00 00 goto +8 <LBB0_69> 0000000000000468 <LBB0_63>: 141: 16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67> 142: 16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68> 143: 05 00 05 00 00 00 00 00 goto +5 <LBB0_69> 0000000000000480 <LBB0_68>: 144: 79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 145: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 0000000000000490 <LBB0_65>: 146: 71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 147: 05 00 01 00 00 00 00 00 goto +1 <LBB0_69> 00000000000004a0 <LBB0_67>: 148: 61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 00000000000004a8 <LBB0_69>: 149: 67 01 00 00 20 00 00 00 r1 <<= 32 150: b7 02 00 00 00 00 00 00 r2 = 0 151: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 152: c7 01 00 00 20 00 00 00 r1 s>>= 32 153: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000004d0 <LBB0_71>: 154: 77 01 00 00 20 00 00 00 r1 >>= 323 Fixes: ee26dad ("libbpf: Add support for relocatable bitfields") Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Lorenz Bauer <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Aug 3, 2021
commit 16a200f upstream. A fstrim on a degraded raid1 can trigger the following null pointer dereference: BTRFS info (device loop0): allowing degraded mounts BTRFS info (device loop0): disk space caching is enabled BTRFS info (device loop0): has skinny extents BTRFS warning (device loop0): devid 2 uuid 97ac16f7-e14d-4db1-95bc-3d489b424adb is missing BTRFS warning (device loop0): devid 2 uuid 97ac16f7-e14d-4db1-95bc-3d489b424adb is missing BTRFS info (device loop0): enabling ssd optimizations BUG: kernel NULL pointer dereference, address: 0000000000000620 PGD 0 P4D 0 Oops: 0000 [Freescale#1] SMP NOPTI CPU: 0 PID: 4574 Comm: fstrim Not tainted 5.13.0-rc7+ Freescale#31 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 RIP: 0010:btrfs_trim_fs+0x199/0x4a0 [btrfs] RSP: 0018:ffff959541797d28 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff946f84eca508 RCX: a7a67937adff8608 RDX: ffff946e8122d000 RSI: 0000000000000000 RDI: ffffffffc02fdbf0 RBP: ffff946ea4615000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: ffff946e8122d960 R12: 0000000000000000 R13: ffff959541797db8 R14: ffff946e8122d000 R15: ffff959541797db8 FS: 00007f55917a5080(0000) GS:ffff946f9bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000620 CR3: 000000002d2c8001 CR4: 00000000000706f0 Call Trace: btrfs_ioctl_fitrim+0x167/0x260 [btrfs] btrfs_ioctl+0x1c00/0x2fe0 [btrfs] ? selinux_file_ioctl+0x140/0x240 ? syscall_trace_enter.constprop.0+0x188/0x240 ? __x64_sys_ioctl+0x83/0xb0 __x64_sys_ioctl+0x83/0xb0 Reproducer: $ mkfs.btrfs -fq -d raid1 -m raid1 /dev/loop0 /dev/loop1 $ mount /dev/loop0 /btrfs $ umount /btrfs $ btrfs dev scan --forget $ mount -o degraded /dev/loop0 /btrfs $ fstrim /btrfs The reason is we call btrfs_trim_free_extents() for the missing device, which uses device->bdev (NULL for missing device) to find if the device supports discard. Fix is to check if the device is missing before calling btrfs_trim_free_extents(). CC: [email protected] # 5.4+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Anand Jain <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Sep 20, 2021
[ Upstream commit 240e126 ] uart_handle_dcd_change() requires a port lock to be held and will emit a warning when lockdep is enabled. Held corresponding lock to fix the following warnings. [ 132.528648] WARNING: CPU: 5 PID: 11600 at drivers/tty/serial/serial_core.c:3046 uart_handle_dcd_change+0xf4/0x120 [ 132.530482] Modules linked in: [ 132.531050] CPU: 5 PID: 11600 Comm: jsm Not tainted 5.14.0-rc1-00003-g7fef2edf7cc7-dirty Freescale#31 [ 132.535268] RIP: 0010:uart_handle_dcd_change+0xf4/0x120 [ 132.557100] Call Trace: [ 132.557562] ? __free_pages+0x83/0xb0 [ 132.558213] neo_parse_modem+0x156/0x220 [ 132.558897] neo_param+0x399/0x840 [ 132.559495] jsm_tty_open+0x12f/0x2d0 [ 132.560131] uart_startup.part.18+0x153/0x340 [ 132.560888] ? lock_is_held_type+0xe9/0x140 [ 132.561660] uart_port_activate+0x7f/0xe0 [ 132.562351] ? uart_startup.part.18+0x340/0x340 [ 132.563003] tty_port_open+0x8d/0xf0 [ 132.563523] ? uart_set_options+0x1e0/0x1e0 [ 132.564125] uart_open+0x24/0x40 [ 132.564604] tty_open+0x15c/0x630 Signed-off-by: Zheyu Ma <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Sep 20, 2021
[ Upstream commit 240e126 ] uart_handle_dcd_change() requires a port lock to be held and will emit a warning when lockdep is enabled. Held corresponding lock to fix the following warnings. [ 132.528648] WARNING: CPU: 5 PID: 11600 at drivers/tty/serial/serial_core.c:3046 uart_handle_dcd_change+0xf4/0x120 [ 132.530482] Modules linked in: [ 132.531050] CPU: 5 PID: 11600 Comm: jsm Not tainted 5.14.0-rc1-00003-g7fef2edf7cc7-dirty Freescale#31 [ 132.535268] RIP: 0010:uart_handle_dcd_change+0xf4/0x120 [ 132.557100] Call Trace: [ 132.557562] ? __free_pages+0x83/0xb0 [ 132.558213] neo_parse_modem+0x156/0x220 [ 132.558897] neo_param+0x399/0x840 [ 132.559495] jsm_tty_open+0x12f/0x2d0 [ 132.560131] uart_startup.part.18+0x153/0x340 [ 132.560888] ? lock_is_held_type+0xe9/0x140 [ 132.561660] uart_port_activate+0x7f/0xe0 [ 132.562351] ? uart_startup.part.18+0x340/0x340 [ 132.563003] tty_port_open+0x8d/0xf0 [ 132.563523] ? uart_set_options+0x1e0/0x1e0 [ 132.564125] uart_open+0x24/0x40 [ 132.564604] tty_open+0x15c/0x630 Signed-off-by: Zheyu Ma <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Sep 22, 2021
[ Upstream commit 240e126 ] uart_handle_dcd_change() requires a port lock to be held and will emit a warning when lockdep is enabled. Held corresponding lock to fix the following warnings. [ 132.528648] WARNING: CPU: 5 PID: 11600 at drivers/tty/serial/serial_core.c:3046 uart_handle_dcd_change+0xf4/0x120 [ 132.530482] Modules linked in: [ 132.531050] CPU: 5 PID: 11600 Comm: jsm Not tainted 5.14.0-rc1-00003-g7fef2edf7cc7-dirty Freescale#31 [ 132.535268] RIP: 0010:uart_handle_dcd_change+0xf4/0x120 [ 132.557100] Call Trace: [ 132.557562] ? __free_pages+0x83/0xb0 [ 132.558213] neo_parse_modem+0x156/0x220 [ 132.558897] neo_param+0x399/0x840 [ 132.559495] jsm_tty_open+0x12f/0x2d0 [ 132.560131] uart_startup.part.18+0x153/0x340 [ 132.560888] ? lock_is_held_type+0xe9/0x140 [ 132.561660] uart_port_activate+0x7f/0xe0 [ 132.562351] ? uart_startup.part.18+0x340/0x340 [ 132.563003] tty_port_open+0x8d/0xf0 [ 132.563523] ? uart_set_options+0x1e0/0x1e0 [ 132.564125] uart_open+0x24/0x40 [ 132.564604] tty_open+0x15c/0x630 Signed-off-by: Zheyu Ma <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Nov 19, 2021
[ Upstream commit d412137 ] The perf_buffer fails on system with offline cpus: # test_progs -t perf_buffer test_perf_buffer:PASS:nr_cpus 0 nsec test_perf_buffer:PASS:nr_on_cpus 0 nsec test_perf_buffer:PASS:skel_load 0 nsec test_perf_buffer:PASS:attach_kprobe 0 nsec test_perf_buffer:PASS:perf_buf__new 0 nsec test_perf_buffer:PASS:epoll_fd 0 nsec skipping offline CPU Freescale#24 skipping offline CPU Freescale#25 skipping offline CPU Freescale#26 skipping offline CPU Freescale#27 skipping offline CPU Freescale#28 skipping offline CPU Freescale#29 skipping offline CPU Freescale#30 skipping offline CPU Freescale#31 test_perf_buffer:PASS:perf_buffer__poll 0 nsec test_perf_buffer:PASS:seen_cpu_cnt 0 nsec test_perf_buffer:FAIL:buf_cnt got 24, expected 32 Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED Changing the test to check online cpus instead of possible. Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
zandrey
pushed a commit
to zandrey/linux-fslc
that referenced
this pull request
Nov 19, 2021
[ Upstream commit d412137 ] The perf_buffer fails on system with offline cpus: # test_progs -t perf_buffer test_perf_buffer:PASS:nr_cpus 0 nsec test_perf_buffer:PASS:nr_on_cpus 0 nsec test_perf_buffer:PASS:skel_load 0 nsec test_perf_buffer:PASS:attach_kprobe 0 nsec test_perf_buffer:PASS:perf_buf__new 0 nsec test_perf_buffer:PASS:epoll_fd 0 nsec skipping offline CPU Freescale#24 skipping offline CPU Freescale#25 skipping offline CPU Freescale#26 skipping offline CPU Freescale#27 skipping offline CPU Freescale#28 skipping offline CPU Freescale#29 skipping offline CPU Freescale#30 skipping offline CPU Freescale#31 test_perf_buffer:PASS:perf_buffer__poll 0 nsec test_perf_buffer:PASS:seen_cpu_cnt 0 nsec test_perf_buffer:FAIL:buf_cnt got 24, expected 32 Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED Changing the test to check online cpus instead of possible. Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
LeBlue
pushed a commit
to LeBlue/linux-fslc
that referenced
this pull request
Jan 20, 2022
[ Upstream commit 240e126 ] uart_handle_dcd_change() requires a port lock to be held and will emit a warning when lockdep is enabled. Held corresponding lock to fix the following warnings. [ 132.528648] WARNING: CPU: 5 PID: 11600 at drivers/tty/serial/serial_core.c:3046 uart_handle_dcd_change+0xf4/0x120 [ 132.530482] Modules linked in: [ 132.531050] CPU: 5 PID: 11600 Comm: jsm Not tainted 5.14.0-rc1-00003-g7fef2edf7cc7-dirty Freescale#31 [ 132.535268] RIP: 0010:uart_handle_dcd_change+0xf4/0x120 [ 132.557100] Call Trace: [ 132.557562] ? __free_pages+0x83/0xb0 [ 132.558213] neo_parse_modem+0x156/0x220 [ 132.558897] neo_param+0x399/0x840 [ 132.559495] jsm_tty_open+0x12f/0x2d0 [ 132.560131] uart_startup.part.18+0x153/0x340 [ 132.560888] ? lock_is_held_type+0xe9/0x140 [ 132.561660] uart_port_activate+0x7f/0xe0 [ 132.562351] ? uart_startup.part.18+0x340/0x340 [ 132.563003] tty_port_open+0x8d/0xf0 [ 132.563523] ? uart_set_options+0x1e0/0x1e0 [ 132.564125] uart_open+0x24/0x40 [ 132.564604] tty_open+0x15c/0x630 Signed-off-by: Zheyu Ma <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
linkjumper
pushed a commit
to linkjumper/linux-fslc
that referenced
this pull request
Apr 20, 2024
commit a7d6027 upstream. syzkaller reported an overflown write in arp_req_get(). [0] When ioctl(SIOCGARP) is issued, arp_req_get() looks up an neighbour entry and copies neigh->ha to struct arpreq.arp_ha.sa_data. The arp_ha here is struct sockaddr, not struct sockaddr_storage, so the sa_data buffer is just 14 bytes. In the splat below, 2 bytes are overflown to the next int field, arp_flags. We initialise the field just after the memcpy(), so it's not a problem. However, when dev->addr_len is greater than 22 (e.g. MAX_ADDR_LEN), arp_netmask is overwritten, which could be set as htonl(0xFFFFFFFFUL) in arp_ioctl() before calling arp_req_get(). To avoid the overflow, let's limit the max length of memcpy(). Note that commit b5f0de6 ("net: dev: Convert sa_data to flexible array in struct sockaddr") just silenced syzkaller. [0]: memcpy: detected field-spanning write (size 16) of single field "r->arp_ha.sa_data" at net/ipv4/arp.c:1128 (size 14) WARNING: CPU: 0 PID: 144638 at net/ipv4/arp.c:1128 arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Modules linked in: CPU: 0 PID: 144638 Comm: syz-executor.4 Not tainted 6.1.74 Freescale#31 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014 RIP: 0010:arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Code: fd ff ff e8 41 42 de fb b9 0e 00 00 00 4c 89 fe 48 c7 c2 20 6d ab 87 48 c7 c7 80 6d ab 87 c6 05 25 af 72 04 01 e8 5f 8d ad fb <0f> 0b e9 6c fd ff ff e8 13 42 de fb be 03 00 00 00 4c 89 e7 e8 a6 RSP: 0018:ffffc900050b7998 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88803a815000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8641a44a RDI: 0000000000000001 RBP: ffffc900050b7a98 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 203a7970636d656d R12: ffff888039c54000 R13: 1ffff92000a16f37 R14: ffff88803a815084 R15: 0000000000000010 FS: 00007f172bf306c0(0000) GS:ffff88805aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f172b3569f0 CR3: 0000000057f12005 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> arp_ioctl+0x33f/0x4b0 net/ipv4/arp.c:1261 inet_ioctl+0x314/0x3a0 net/ipv4/af_inet.c:981 sock_do_ioctl+0xdf/0x260 net/socket.c:1204 sock_ioctl+0x3ef/0x650 net/socket.c:1321 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x18e/0x220 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x64/0xce RIP: 0033:0x7f172b262b8d Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f172bf300b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f172b3abf80 RCX: 00007f172b262b8d RDX: 0000000020000000 RSI: 0000000000008954 RDI: 0000000000000003 RBP: 00007f172b2d3493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f172b3abf80 R15: 00007f172bf10000 </TASK> Reported-by: syzkaller <[email protected]> Reported-by: Bjoern Doebel <[email protected]> Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
linkjumper
pushed a commit
to linkjumper/linux-fslc
that referenced
this pull request
Apr 20, 2024
commit a7d6027 upstream. syzkaller reported an overflown write in arp_req_get(). [0] When ioctl(SIOCGARP) is issued, arp_req_get() looks up an neighbour entry and copies neigh->ha to struct arpreq.arp_ha.sa_data. The arp_ha here is struct sockaddr, not struct sockaddr_storage, so the sa_data buffer is just 14 bytes. In the splat below, 2 bytes are overflown to the next int field, arp_flags. We initialise the field just after the memcpy(), so it's not a problem. However, when dev->addr_len is greater than 22 (e.g. MAX_ADDR_LEN), arp_netmask is overwritten, which could be set as htonl(0xFFFFFFFFUL) in arp_ioctl() before calling arp_req_get(). To avoid the overflow, let's limit the max length of memcpy(). Note that commit b5f0de6 ("net: dev: Convert sa_data to flexible array in struct sockaddr") just silenced syzkaller. [0]: memcpy: detected field-spanning write (size 16) of single field "r->arp_ha.sa_data" at net/ipv4/arp.c:1128 (size 14) WARNING: CPU: 0 PID: 144638 at net/ipv4/arp.c:1128 arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Modules linked in: CPU: 0 PID: 144638 Comm: syz-executor.4 Not tainted 6.1.74 Freescale#31 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014 RIP: 0010:arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Code: fd ff ff e8 41 42 de fb b9 0e 00 00 00 4c 89 fe 48 c7 c2 20 6d ab 87 48 c7 c7 80 6d ab 87 c6 05 25 af 72 04 01 e8 5f 8d ad fb <0f> 0b e9 6c fd ff ff e8 13 42 de fb be 03 00 00 00 4c 89 e7 e8 a6 RSP: 0018:ffffc900050b7998 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88803a815000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8641a44a RDI: 0000000000000001 RBP: ffffc900050b7a98 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 203a7970636d656d R12: ffff888039c54000 R13: 1ffff92000a16f37 R14: ffff88803a815084 R15: 0000000000000010 FS: 00007f172bf306c0(0000) GS:ffff88805aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f172b3569f0 CR3: 0000000057f12005 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> arp_ioctl+0x33f/0x4b0 net/ipv4/arp.c:1261 inet_ioctl+0x314/0x3a0 net/ipv4/af_inet.c:981 sock_do_ioctl+0xdf/0x260 net/socket.c:1204 sock_ioctl+0x3ef/0x650 net/socket.c:1321 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x18e/0x220 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x64/0xce RIP: 0033:0x7f172b262b8d Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f172bf300b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f172b3abf80 RCX: 00007f172b262b8d RDX: 0000000020000000 RSI: 0000000000008954 RDI: 0000000000000003 RBP: 00007f172b2d3493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f172b3abf80 R15: 00007f172bf10000 </TASK> Reported-by: syzkaller <[email protected]> Reported-by: Bjoern Doebel <[email protected]> Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
linkjumper
pushed a commit
to linkjumper/linux-fslc
that referenced
this pull request
Apr 23, 2024
commit a7d6027 upstream. syzkaller reported an overflown write in arp_req_get(). [0] When ioctl(SIOCGARP) is issued, arp_req_get() looks up an neighbour entry and copies neigh->ha to struct arpreq.arp_ha.sa_data. The arp_ha here is struct sockaddr, not struct sockaddr_storage, so the sa_data buffer is just 14 bytes. In the splat below, 2 bytes are overflown to the next int field, arp_flags. We initialise the field just after the memcpy(), so it's not a problem. However, when dev->addr_len is greater than 22 (e.g. MAX_ADDR_LEN), arp_netmask is overwritten, which could be set as htonl(0xFFFFFFFFUL) in arp_ioctl() before calling arp_req_get(). To avoid the overflow, let's limit the max length of memcpy(). Note that commit b5f0de6 ("net: dev: Convert sa_data to flexible array in struct sockaddr") just silenced syzkaller. [0]: memcpy: detected field-spanning write (size 16) of single field "r->arp_ha.sa_data" at net/ipv4/arp.c:1128 (size 14) WARNING: CPU: 0 PID: 144638 at net/ipv4/arp.c:1128 arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Modules linked in: CPU: 0 PID: 144638 Comm: syz-executor.4 Not tainted 6.1.74 Freescale#31 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014 RIP: 0010:arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Code: fd ff ff e8 41 42 de fb b9 0e 00 00 00 4c 89 fe 48 c7 c2 20 6d ab 87 48 c7 c7 80 6d ab 87 c6 05 25 af 72 04 01 e8 5f 8d ad fb <0f> 0b e9 6c fd ff ff e8 13 42 de fb be 03 00 00 00 4c 89 e7 e8 a6 RSP: 0018:ffffc900050b7998 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88803a815000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8641a44a RDI: 0000000000000001 RBP: ffffc900050b7a98 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 203a7970636d656d R12: ffff888039c54000 R13: 1ffff92000a16f37 R14: ffff88803a815084 R15: 0000000000000010 FS: 00007f172bf306c0(0000) GS:ffff88805aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f172b3569f0 CR3: 0000000057f12005 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> arp_ioctl+0x33f/0x4b0 net/ipv4/arp.c:1261 inet_ioctl+0x314/0x3a0 net/ipv4/af_inet.c:981 sock_do_ioctl+0xdf/0x260 net/socket.c:1204 sock_ioctl+0x3ef/0x650 net/socket.c:1321 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x18e/0x220 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x64/0xce RIP: 0033:0x7f172b262b8d Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f172bf300b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f172b3abf80 RCX: 00007f172b262b8d RDX: 0000000020000000 RSI: 0000000000008954 RDI: 0000000000000003 RBP: 00007f172b2d3493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f172b3abf80 R15: 00007f172bf10000 </TASK> Reported-by: syzkaller <[email protected]> Reported-by: Bjoern Doebel <[email protected]> Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
linkjumper
pushed a commit
to linkjumper/linux-fslc
that referenced
this pull request
Apr 23, 2024
commit a7d6027 upstream. syzkaller reported an overflown write in arp_req_get(). [0] When ioctl(SIOCGARP) is issued, arp_req_get() looks up an neighbour entry and copies neigh->ha to struct arpreq.arp_ha.sa_data. The arp_ha here is struct sockaddr, not struct sockaddr_storage, so the sa_data buffer is just 14 bytes. In the splat below, 2 bytes are overflown to the next int field, arp_flags. We initialise the field just after the memcpy(), so it's not a problem. However, when dev->addr_len is greater than 22 (e.g. MAX_ADDR_LEN), arp_netmask is overwritten, which could be set as htonl(0xFFFFFFFFUL) in arp_ioctl() before calling arp_req_get(). To avoid the overflow, let's limit the max length of memcpy(). Note that commit b5f0de6 ("net: dev: Convert sa_data to flexible array in struct sockaddr") just silenced syzkaller. [0]: memcpy: detected field-spanning write (size 16) of single field "r->arp_ha.sa_data" at net/ipv4/arp.c:1128 (size 14) WARNING: CPU: 0 PID: 144638 at net/ipv4/arp.c:1128 arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Modules linked in: CPU: 0 PID: 144638 Comm: syz-executor.4 Not tainted 6.1.74 Freescale#31 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014 RIP: 0010:arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Code: fd ff ff e8 41 42 de fb b9 0e 00 00 00 4c 89 fe 48 c7 c2 20 6d ab 87 48 c7 c7 80 6d ab 87 c6 05 25 af 72 04 01 e8 5f 8d ad fb <0f> 0b e9 6c fd ff ff e8 13 42 de fb be 03 00 00 00 4c 89 e7 e8 a6 RSP: 0018:ffffc900050b7998 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88803a815000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8641a44a RDI: 0000000000000001 RBP: ffffc900050b7a98 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 203a7970636d656d R12: ffff888039c54000 R13: 1ffff92000a16f37 R14: ffff88803a815084 R15: 0000000000000010 FS: 00007f172bf306c0(0000) GS:ffff88805aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f172b3569f0 CR3: 0000000057f12005 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> arp_ioctl+0x33f/0x4b0 net/ipv4/arp.c:1261 inet_ioctl+0x314/0x3a0 net/ipv4/af_inet.c:981 sock_do_ioctl+0xdf/0x260 net/socket.c:1204 sock_ioctl+0x3ef/0x650 net/socket.c:1321 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x18e/0x220 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x64/0xce RIP: 0033:0x7f172b262b8d Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f172bf300b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f172b3abf80 RCX: 00007f172b262b8d RDX: 0000000020000000 RSI: 0000000000008954 RDI: 0000000000000003 RBP: 00007f172b2d3493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f172b3abf80 R15: 00007f172bf10000 </TASK> Reported-by: syzkaller <[email protected]> Reported-by: Bjoern Doebel <[email protected]> Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
otavio
pushed a commit
that referenced
this pull request
Sep 28, 2024
Fix kernel oops issue when capture without pipeline setup, log as bellow: [ 65.185151] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 65.217211] CPU: 2 PID: 730 Comm: v4l2-ctl Not tainted 6.6.36-g7bb0a8c6ab3d #31 [ 65.224506] Hardware name: NXP i.MX95 19X19 board (DT) [ 65.229635] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 65.236579] pc : formatter_subdev_enable_streams+0xb0/0x22c [ 65.242143] lr : formatter_subdev_enable_streams+0x188/0x22c [ 65.247794] sp : ffff80008576b940 [ 65.251096] x29: ffff80008576b940 x28: ffff000085b3e180 x27: ffff0000806844b0 [ 65.258220] x26: 0000000000000002 x25: ffff000080684480 x24: 0000000000000001 [ 65.265344] x23: ffff000080f37010 x22: 0000000000000000 x21: ffff00008442cae0 [ 65.272468] x20: ffff0000810e3498 x19: ffff0000810e3480 x18: ffffffffffffffff [ 65.279592] x17: 6d6920646c756f68 x16: 7320312064617020 x15: 6e6f206563697665 [ 65.286724] x14: 642d627573206574 x13: ffff800082091528 x12: 000000000000081c [ 65.293848] x11: 00000000000002b4 x10: ffff8000820e9528 x9 : 0000000000000000 [ 65.300972] x8 : ffff80008576b7e4 x7 : 0000000000000000 x6 : ffff000080f37190 [ 65.308096] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 65.315220] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff8000816e7000 [ 65.322345] Call trace: [ 65.324781] formatter_subdev_enable_streams+0xb0/0x22c [ 65.329997] v4l2_subdev_enable_streams+0xe8/0x26c [ 65.334781] mxc_isi_crossbar_enable_streams+0x12c/0x1d0 [ 65.340085] v4l2_subdev_enable_streams+0xe8/0x26c [ 65.344869] mxc_isi_pipe_enable+0x204/0x2ac [ 65.349124] mxc_isi_vb2_start_streaming+0xa0/0xe4 [ 65.353908] vb2_start_streaming+0x68/0x15c [ 65.358086] vb2_core_streamon+0xf8/0x1bc [ 65.362081] vb2_streamon+0x18/0x64 [ 65.365565] mxc_isi_video_streamon+0x28c/0x314 [ 65.370080] v4l_streamon+0x24/0x30 [ 65.373564] __video_do_ioctl+0x32c/0x3f8 [ 65.377568] video_usercopy+0x2c8/0x658 [ 65.381399] video_ioctl2+0x18/0x24 [ 65.384883] v4l2_ioctl+0x40/0x60 [ 65.388194] __arm64_sys_ioctl+0xac/0xf0 [ 65.392111] invoke_syscall+0x48/0x114 [ 65.395855] el0_svc_common.constprop.0+0xc0/0xe0 [ 65.400552] do_el0_svc+0x1c/0x28 [ 65.403863] el0_svc+0x40/0xe4 [ 65.406914] el0t_64_sync_handler+0x120/0x12c [ 65.411264] el0t_64_sync+0x190/0x194 [ 65.414916] Code: a8c57bfd d50323bf d65f03c0 f0004320 (39401085) [ 65.420998] ---[ end trace 0000000000000000 ]--- Reproduce step: Run command as bellow after system boot. $ v4l2-ctl -v width=1920,height=1080,pixelformat=YUYV --stream-mmap The reason is that it will try to get data type index by searching map between data type and its index when start capture, but the data type is missing by default if no pipepline setup. So initialize the data type to default value aligned to subdev format. Signed-off-by: Guoniu.zhou <[email protected]> Reviewed-by: Robby Cai <[email protected]>
otavio
pushed a commit
that referenced
this pull request
Dec 9, 2024
[ Upstream commit d4f36e5 ] Running "modprobe amdgpu" the second time (followed by a modprobe -r amdgpu) causes a call trace like: [ 845.212163] Memory manager not clean during takedown. [ 845.212170] WARNING: CPU: 4 PID: 2481 at drivers/gpu/drm/drm_mm.c:999 drm_mm_takedown+0x2b/0x40 [ 845.212177] Modules linked in: amdgpu(OE-) amddrm_ttm_helper(OE) amddrm_buddy(OE) amdxcp(OE) amd_sched(OE) drm_exec drm_suballoc_helper drm_display_helper i2c_algo_bit amdttm(OE) amdkcl(OE) cec rc_core sunrpc qrtr intel_rapl_msr intel_rapl_common snd_hda_codec_hdmi edac_mce_amd snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_usb_audio snd_hda_codec snd_usbmidi_lib kvm_amd snd_hda_core snd_ump mc snd_hwdep kvm snd_pcm snd_seq_midi snd_seq_midi_event irqbypass crct10dif_pclmul snd_rawmidi polyval_clmulni polyval_generic ghash_clmulni_intel sha256_ssse3 sha1_ssse3 snd_seq aesni_intel crypto_simd snd_seq_device cryptd snd_timer mfd_aaeon asus_nb_wmi eeepc_wmi joydev asus_wmi snd ledtrig_audio sparse_keymap ccp wmi_bmof input_leds k10temp i2c_piix4 platform_profile rapl soundcore gpio_amdpt mac_hid binfmt_misc msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs ip_tables x_tables autofs4 hid_logitech_hidpp hid_logitech_dj hid_generic usbhid hid ahci xhci_pci igc crc32_pclmul libahci xhci_pci_renesas video [ 845.212284] wmi [last unloaded: amddrm_ttm_helper(OE)] [ 845.212290] CPU: 4 PID: 2481 Comm: modprobe Tainted: G W OE 6.8.0-31-generic #31-Ubuntu [ 845.212296] RIP: 0010:drm_mm_takedown+0x2b/0x40 [ 845.212300] Code: 1f 44 00 00 48 8b 47 38 48 83 c7 38 48 39 f8 75 09 31 c0 31 ff e9 90 2e 86 00 55 48 c7 c7 d0 f6 8e 8a 48 89 e5 e8 f5 db 45 ff <0f> 0b 5d 31 c0 31 ff e9 74 2e 86 00 66 0f 1f 84 00 00 00 00 00 90 [ 845.212302] RSP: 0018:ffffb11302127ae0 EFLAGS: 00010246 [ 845.212305] RAX: 0000000000000000 RBX: ffff92aa5020fc08 RCX: 0000000000000000 [ 845.212307] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 845.212309] RBP: ffffb11302127ae0 R08: 0000000000000000 R09: 0000000000000000 [ 845.212310] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000004 [ 845.212312] R13: ffff92aa50200000 R14: ffff92aa5020fb10 R15: ffff92aa5020faa0 [ 845.212313] FS: 0000707dd7c7c080(0000) GS:ffff92b93de00000(0000) knlGS:0000000000000000 [ 845.212316] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 845.212318] CR2: 00007d48b0aee200 CR3: 0000000115a58000 CR4: 0000000000f50ef0 [ 845.212320] PKRU: 55555554 [ 845.212321] Call Trace: [ 845.212323] <TASK> [ 845.212328] ? show_regs+0x6d/0x80 [ 845.212333] ? __warn+0x89/0x160 [ 845.212339] ? drm_mm_takedown+0x2b/0x40 [ 845.212344] ? report_bug+0x17e/0x1b0 [ 845.212350] ? handle_bug+0x51/0xa0 [ 845.212355] ? exc_invalid_op+0x18/0x80 [ 845.212359] ? asm_exc_invalid_op+0x1b/0x20 [ 845.212366] ? drm_mm_takedown+0x2b/0x40 [ 845.212371] amdgpu_gtt_mgr_fini+0xa9/0x130 [amdgpu] [ 845.212645] amdgpu_ttm_fini+0x264/0x340 [amdgpu] [ 845.212770] amdgpu_bo_fini+0x2e/0xc0 [amdgpu] [ 845.212894] gmc_v12_0_sw_fini+0x2a/0x40 [amdgpu] [ 845.213036] amdgpu_device_fini_sw+0x11a/0x590 [amdgpu] [ 845.213159] amdgpu_driver_release_kms+0x16/0x40 [amdgpu] [ 845.213302] devm_drm_dev_init_release+0x5e/0x90 [ 845.213305] devm_action_release+0x12/0x30 [ 845.213308] release_nodes+0x42/0xd0 [ 845.213311] devres_release_all+0x97/0xe0 [ 845.213314] device_unbind_cleanup+0x12/0x80 [ 845.213317] device_release_driver_internal+0x230/0x270 [ 845.213319] ? srso_alias_return_thunk+0x5/0xfbef5 This is caused by lost memory during early init phase. First time driver is removed, memory is freed but when second time the driver is inserted, VBIOS dmub is not active, since the PSP policy is to retain the driver loaded version on subsequent warm boots. Hence, communication with VBIOS DMUB fails. Fix this by aborting further communication with vbios dmub and release the memory immediately. Fixes: f59549c ("drm/amd/display: free bo used for dmub bounding box") Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Fixes:
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[220]: Failed to apply ACL on /dev/v4l-subdev0: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[224]: Failed to apply ACL on /dev/v4l-subdev1: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[215]: Failed to apply ACL on /dev/v4l-subdev10: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[228]: Failed to apply ACL on /dev/v4l-subdev2: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[232]: Failed to apply ACL on /dev/v4l-subdev5: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[217]: Failed to apply ACL on /dev/v4l-subdev11: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[214]: Failed to apply ACL on /dev/dri/card1: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[216]: Failed to apply ACL on /dev/v4l-subdev8: Operation not supported
| Sep 04 09:05:10 imx6qdl-variscite-som systemd-udevd[226]: Failed to apply ACL on /dev/v4l-subdev9: Operation not supported
and nasty follow-ups: Starting weston from sddm as unpriviledged user fails
with some hints on missing access rights.
For a better understanding CONFIG_TMPFS=y was added which was set indirectly
by CONFIG_DEVTMPFS=y
Signed-off-by: Andreas Müller [email protected]