Base init scripts for SYSV systems

* Based on the init scripts included with Debian GNU/Linux, then take code from the
  already existing ones, trying to merge them into one for better maintainability.
  + Merge openzfs#2148 - Inform OpenRC that ZFS uses mtab.
  + Add a configurable ZFS_INITRD_POST_MODPROBE_SLEEP used in the initrd to sleep after the modprobe.
  + The import function, do_import(), imports pools by name instead of '-a' [all].
    + Test all '/dev/disk/by-*' dirs for import. Include /dev as a last ditch attempt.
  + Fallback on importing the pool using the cache file (if it exists) if the
    'by-id' didn't work.
  + Add exceptions to pool imports.
  + ZED script from the Debian GNU/Linux packages added.

Signed-off-by: Turbo Fredriksson [email protected]
Closes: openzfs#2974, openzfs#2107.

config/zfs-build.m4

@@ -311,6 +311,15 @@ AC_DEFUN([ZFS_AC_DEFAULT_PACKAGE], [
 
 	AC_MSG_RESULT([$DEFAULT_INIT_SCRIPT])
 	AC_SUBST(DEFAULT_INIT_SCRIPT)
+
+	AC_MSG_CHECKING([default init config direectory])
+	AS_IF([test -d "/etc/default"], [
+		DEFAULT_INITCONF_DIR="/etc/default"
+	], [test -d "/etc/sysconfig"], [
+		DEFAULT_INITCONF_DIR="/etc/sysconfig"
+	])
+	AC_MSG_RESULT([$DEFAULT_INITCONF_DIR])
+	AC_SUBST(DEFAULT_INITCONF_DIR)
 ])
 
 dnl #

etc/init.d/.gitignore

@@ -1 +1,6 @@
+common.init
+zfs-import
+zfs-mount
+zfs-share
+zfs-zed
 zfs

etc/init.d/Makefile.am

@@ -1,22 +1,36 @@
 initdir = $(DEFAULT_INIT_DIR)
-init_SCRIPTS = zfs
+init_SCRIPTS = zfs-import zfs-mount zfs-share zfs-zed
+
+initcommondir = $(sysconfdir)/zfs
+initcommon_SCRIPTS = common.init
+
+initconfdir = $(DEFAULT_INITCONF_DIR)
+initconf_SCRIPTS = zfs
 
 EXTRA_DIST = \
-	$(top_srcdir)/etc/init.d/zfs.fedora.in \
-	$(top_srcdir)/etc/init.d/zfs.gentoo.in \
-	$(top_srcdir)/etc/init.d/zfs.lsb.in \
-	$(top_srcdir)/etc/init.d/zfs.lunar.in \
-	$(top_srcdir)/etc/init.d/zfs.redhat.in
+	$(top_srcdir)/etc/init.d/common.init.in \
+	$(top_srcdir)/etc/init.d/zfs-share.in \
+	$(top_srcdir)/etc/init.d/zfs-import.in \
+	$(top_srcdir)/etc/init.d/zfs-mount.in \
+	$(top_srcdir)/etc/init.d/zfs-zed.in \
+	$(top_srcdir)/etc/init.d/zfs.in
 
-$(init_SCRIPTS): $(init_SCRIPTS).$(DEFAULT_INIT_SCRIPT).in
-	-$(SED) -e 's,@bindir\@,$(bindir),g' \
-		-e 's,@sbindir\@,$(sbindir),g' \
-		-e 's,@udevdir\@,$(udevdir),g' \
-		-e 's,@udevruledir\@,$(udevruledir),g' \
-		-e 's,@sysconfdir\@,$(sysconfdir),g' \
-		-e 's,@initdir\@,$(initdir),g' \
-		-e 's,@runstatedir\@,$(runstatedir),g' \
-		'$@.$(DEFAULT_INIT_SCRIPT).in' >'$@'
+$(init_SCRIPTS) $(initconf_SCRIPTS) $(initcommon_SCRIPTS):
+	-(if [ -e /etc/debian_version ]; then \
+		NFS_SRV=nfs-kernel-server; \
+	  else \
+		NFS_SRV=nfs; \
+	  fi; \
+	  $(SED) -e 's,@bindir\@,$(bindir),g' \
+		 -e 's,@sbindir\@,$(sbindir),g' \
+		 -e 's,@udevdir\@,$(udevdir),g' \
+		 -e 's,@udevruledir\@,$(udevruledir),g' \
+		 -e 's,@sysconfdir\@,$(sysconfdir),g' \
+		 -e 's,@initconfdir\@,$(initconfdir),g' \
+		 -e 's,@initdir\@,$(initdir),g' \
+		 -e 's,@runstatedir\@,$(runstatedir),g' \
+		 -e "s,@NFS_SRV\@,$$NFS_SRV,g" \
+		 '[email protected]' >'$@')
 
 distclean-local::
-	-$(RM) $(init_SCRIPTS)
+	-$(RM) $(init_SCRIPTS) $(initcommon_SCRIPTS) $(initconf_SCRIPTS)

etc/init.d/common.init.in

@@ -0,0 +1,249 @@
+# This is a script with common functions etc used by zfs-mount and zfs-share.
+#
+# It is _NOT_ to be called independently
+
+PATH=/sbin:/bin:/usr/bin:/usr/sbin
+
+# Source function library
+if [ -f /lib/lsb/init-functions ]; then
+	. /lib/lsb/init-functions
+elif [ -f /etc/rc.d/init.d/functions ]; then
+	. /etc/rc.d/init.d/functions
+fi
+
+# Of course the functions we need is called differently
+# on different distributions - it would be way to easy
+# otherwise!!
+if type log_failure_msg > /dev/null ; then
+	# LSB functions
+	log_begin_msg=log_begin_msg
+	log_failure_msg=log_failure_msg
+	log_progress_msg=log_progress_msg
+elif type success > /dev/null ; then
+	# Fedora/RedHat functions
+	log_begin_msg=success
+	log_failure_msg=failure
+	log_progress_msg=echo -n
+elif type einfo > /dev/null ; then
+	# Gentoo functions
+	log_begin_msg=einfo
+	log_failure_msg=eerror
+	log_progress_msg=echo -n
+else
+	log_begin_msg=echo -n
+	log_failure_msg=echo
+	log_progress_msg=echo -n
+fi
+
+# The log_end_msg is a little different - it's both an
+# echo of a failed message and a return of a code number.
+# So if it doesn't exist, we define a very simple one
+# that would do the work.
+if ! type log_end_msg > /dev/null ; then
+	log_end_msg() {
+		ret=$1
+		if [ "$ret" -ge 1 ]; then
+			echo " failed!"
+		else
+			echo " success"
+		fi
+		return $ret
+	}
+fi
+log_end_msg=log_end_msg
+
+# Paths to what we need
+ZFS="@sbindir@/zfs"
+ZPOOL="@sbindir@/zpool"
+ZPOOL_CACHE="@sysconfdir@/zfs/zpool.cache"
+
+# Sensible defaults
+ZFS_MOUNT='yes'
+ZFS_UNMOUNT='yes'
+LOCKDIR=/run/lock
+
+# Source zfs configuration, overriding the defaults
+if [ -f /etc/@initdefaultsdir@/zfs ]; then
+	. /etc/@initdefaultsdir@/zfs
+fi
+
+[ ! -d "$LOCKDIR" ] && mkdir $LOCKDIR
+
+# ----------------------------------------------------
+
+zfs_installed() {
+	$log_begin_msg "Checking if zfs userspace tools present"
+	if [ ! -x $ZPOOL ]; then
+		$log_failure_msg "$ZPOOL binary not found."
+		$log_end_msg 1
+	fi
+	if [ ! -x $ZFS ]; then
+		$log_failure_msg "$ZFS binary not found."
+		$log_end_msg 1
+	fi
+	$log_end_msg 0
+}
+
+# Trigger udev and wait for it to settle.
+udev_trigger() {
+	if [ -x /sbin/udevadm ]; then
+		/sbin/udevadm trigger --action=change --subsystem-match=block
+		/sbin/udevadm settle
+	elif [ -x /sbin/udevsettle ]; then
+		/sbin/udevtrigger
+		/sbin/udevsettle
+	fi
+}
+
+# From scripts/common.sh
+wait_udev() {
+	local DEVICE=$1
+	local DELAY=$2
+	local COUNT=0
+
+	udev_trigger
+	while [ ! -e ${DEVICE} ]; do
+		if [ ${COUNT} -gt ${DELAY} ]; then
+			return 1
+		fi
+
+		let COUNT=${COUNT}+1
+	        sleep 1
+	done
+
+	return 0
+}
+
+# Do a lot of checks to make sure it's 'safe' to continue with import/mount etc
+checksystem()
+{
+	if [ -z "$init" ]; then
+		# Not interactive and we don't want to import pool or mount filesystems.
+		# Won't of course work if you're booting from ZFS...
+		grep -qiE '(^|[^\\](\\\\)* )zfs=(off|no|0)( |$)' /proc/cmdline && exit 3
+	fi
+
+	[ -f "$LOCKDIR/$servicename" ] && return 3
+
+	# Check if ZFS is installed.  If not, comply to FC standards and bail
+	zfs_installed || {
+		$log_failure_msg "not installed"
+		return 5
+	}
+
+	# Delay until all required block devices are present.
+	if [ -x /sbin/udevadm ]; then
+		/sbin/udevadm settle
+	elif [ -x /sbin/udevsettle ]; then
+		/sbin/udevsettle
+	fi
+
+	# Load the zfs module stack
+	if ! grep -q zfs /proc/modules ; then
+		$log_begin_msg "Loading kernel ZFS infrastructure: "
+		modprobe zfs || {
+			$log_failure_msg "Could not load zfs module"
+			$log_end_msg 1
+			return 5
+		}
+		$log_end_msg 0
+	fi
+
+	# Just make sure that /dev/zfs is created.
+	wait_udev /dev/zfs 15
+
+	# fix mtab to include already-mounted fs filesystems, in case there are any
+	# we ONLY do this if mtab does not point to /proc/mounts
+	# which is the case in some systems (systemd may bring that soon)
+	if ! readlink /etc/mtab | grep -q /proc ; then
+		if grep -qE "(^/dev/zd|^/dev/zvol| zfs )" /proc/mounts ; then
+			$log_begin_msg "Registering already-mounted ZFS filesystems and volumes: "
+			reregister_mounts || {
+				$log_end_msg 1
+				return 150
+			}
+		fi
+	fi
+
+	# Ensure / exists in /etc/mtab, if not update mtab accordingly.
+	# This should be handled by rc.sysinit but lets be paranoid.
+	awk '$2 == "/" { exit 1 }' /etc/mtab
+	RETVAL=$?
+	if [ "$RETVAL" -eq 0 ]; then
+		/bin/mount -f /
+	fi
+
+	if ! [ `uname -m` == "x86_64" ]; then
+		echo "Warning: You're not running 64bit. Currently native zfs in";
+		echo "         linux is only supported and tested on 64bit.";
+		# should we break here? People doing this should know what they
+		# do, thus i'm not breaking here.
+	fi
+}
+
+reregister_mounts() {
+	cat /etc/mtab | while read -r fs mntpnt fstype opts rest ; do
+		fs=`printf '%b\n' "$fs"`
+		mntpnt=`printf '%b\n' "$mntpnt"`
+		if [ "$fstype" == "zfs" ] ; then
+			if [ "$mntpnt" == "/" ] ; then
+				mount -f -o zfsutil -t zfs --move / /removethismountpointhoweverpossible
+				umount --fake /removethismountpointhoweverpossible
+			else
+				umount --fake "$mntpnt"
+			fi
+		elif echo "$fs" | grep -qE "^/dev/(zd|zvol)" ; then
+			if [ "$mntpnt" == "/" ] ; then
+				mount -f -t "$fstype" --move / /removethismountpointhoweverpossible
+				umount --fake /removethismountpointhoweverpossible
+			else
+				umount --fake "$mntpnt"
+			fi
+		fi
+	done
+	cat /proc/mounts | while read -r fs mntpnt fstype opts rest ; do
+		fs=`printf '%b\n' "$fs"`
+		mntpnt=`printf '%b\n' "$mntpnt"`
+		if [ "$fstype" == "zfs" ] ; then
+			mount -f -t zfs -o zfsutil "$fs" "$mntpnt"
+		elif echo "$fs" | grep -q "^/dev/zd" ; then
+			mount -f -t "$fstype" -o "$opts" "$fs" "$mntpnt"
+		fi
+	done
+}
+
+# i need a bash guru to simplify this, since this is copy and paste, but donno how
+# to correctly dereference variable names in bash, or how to do this right
+
+declare -A MTAB
+declare -A FSTAB
+
+# first parameter is a regular expression that filters mtab
+read_mtab() {
+        for fs in "${!MTAB[@]}" ; do unset MTAB["$fs"] ; done
+        while read -r fs mntpnt fstype opts blah ; do
+                fs=`printf '%b\n' "$fs"`
+                MTAB["$fs"]=$mntpnt
+        done < <(grep -E "$1" /etc/mtab)
+}
+
+in_mtab() {
+        [ "${MTAB[$1]}" != "" ]
+        return $?
+}
+
+# first parameter is a regular expression that filters fstab
+read_fstab() {
+	local i=0
+	for fs in "${!FSTAB[@]}" ; do unset FSTAB["$fs"] ; done
+	while read -r fs mntpnt fstype opts blah ; do
+		fs=`printf '%b\n' "$fs"`
+		FSTAB["$i"]=$mntpnt
+		i=$((i + 1))
+	done < <(grep -E "$1" /etc/fstab)
+}
+
+in_fstab() {
+        [ "${FSTAB[$1]}" != "" ]
+        return $?
+}