Mailbox WIP to discuss how we will implement RTKit #6

svenpeter42 · 2021-08-09T18:26:21Z

untested i think and still has some rough edges. mostly split off from a more complex driver that handled all endpoints internally so there's even a chance that this will work ;)

this uses the mailbox regs starting at 0x800 and exposes up to 256 channels for different clients. just ignore the tracepoint boilerplate

Signed-off-by: Sven Peter <[email protected]>

Add TXDONE_DIRECT for mailbox controllers that can very quickly acknowledge transmission of messages because they are e.g. backed by a hardware FIFO. The mailbox controller on the Apple M1 SoC has a hardware fifo that is 16 messages deep. In the common case this FIFO will always be empty when a message is sent. With TXDONE_DIRECT those messages can be acknowledge immediately and there's no need to enable the interrupt which would directly fire. In the unlikely case that the FIFO is currently full the controller can still fall back to TXDONE_BY_IRQ. Signed-off-by: Sven Peter <[email protected]>

alyssarosenzweig · 2021-08-09T18:54:01Z

when a message is sent. With TXDONE_DIRECT those messages can be
acknowledge immediately and there's no need to enable the interrupt

acknowledged

pipcet · 2021-08-09T19:02:46Z

Here's the main problem I see: endpoints aren't independent. EP0 is special and magic, and needs to control whether or not the other endpoints can even be allowed to send messages to the IOP.

For example, when you start up an endpoint (and we really don't want to start endpoints we don't know how to handle, IMHO), you need to send a message to endpoint 0. I think that should happen automatically when the actual per-endpoint messaging channel (which may or may not be a mailbox) is opened.

svenpeter42 · 2021-08-09T20:26:17Z

This code doesn't deal with the application plane. It just implements the HW FIFO and muxes it into different endpoints. Whatever part implements that application plane (which is different for e.g. SEPOS and RTKit) will have to deal with the magic EP0.

pipcet · 2021-08-10T12:01:15Z

This code doesn't deal with the application plane.

It constrains what the application plane can do, though. Even if we assume a fixed useless epmap (which I'm not convinced is a good strategy), everything that talks to an endpoint needs to talk to EP0 first. That means all drivers using this mailbox will have to talk to the (single, by the design of the mailbox) driver talking to EP0. They'll have to know about it. They'll also have to know about the panic endpoint to know when to stop sending messages and corrupting debug state.

So the endpoints all end up knowing about each other, and the abstraction the mailbox provides does indeed become useless. (Putting everything into one huge monster driver is a bad idea).

I really think it's cleaner to go "through" a muxing/demuxing ASC driver that knows what the state of the IOP is, as my sketch code does: Those endpoints that need to do more than open a channel and talk to it grab a reference to that ASC (I used a remoteproc since the main example is the panic endpoint which simply crashes the remoteproc). The ASC driver can send and receive data for all endpoints (I think it's very probable we're going to need that at some point to work around broken firmware, or to handle initialization phases better); it initializes endpoints when a client connects, it has all the timing data, and it knows when to stop
sending messages because the ASC crashed.

And we don't even have to invent hardware to put into the devicetree, because conveniently there's that start-CPU bit that's on a different page and can be the reg property of the ASC driver.

It just implements the HW FIFO
and muxes it into different endpoints.

So it "just" does two things. I'm saying it should do one.

Whatever part implements that application plane (which is different for e.g. SEPOS and RTKit) will have to deal with the magic EP0.

Is the mgmt endpoint different for SEPOS? I haven't looked at it at all.

Sorry this got a bit long, but you said you wanted a discussion. I hope my point got across, which is that endpoints are not reasonably independent.

When removing the driver module w/o bringing an interface up before the error below occurs. Reason seems to be that cancel_work_sync() is called in t3_sge_stop() for a queue that hasn't been initialized yet. [10085.941785] ------------[ cut here ]------------ [10085.941799] WARNING: CPU: 1 PID: 5850 at kernel/workqueue.c:3074 __flush_work+0x3ff/0x480 [10085.941819] Modules linked in: vfat snd_hda_codec_hdmi fat snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio led_class ee1004 iTCO_ wdt intel_tcc_cooling x86_pkg_temp_thermal coretemp aesni_intel crypto_simd cryptd snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core r 8169 snd_pcm realtek mdio_devres snd_timer snd i2c_i801 i2c_smbus libphy i915 i2c_algo_bit cxgb3(-) intel_gtt ttm mdio drm_kms_helper mei_me s yscopyarea sysfillrect sysimgblt mei fb_sys_fops acpi_pad sch_fq_codel crypto_user drm efivarfs ext4 mbcache jbd2 crc32c_intel [10085.941944] CPU: 1 PID: 5850 Comm: rmmod Not tainted 5.14.0-rc7-next-20210826+ #6 [10085.941974] Hardware name: System manufacturer System Product Name/PRIME H310I-PLUS, BIOS 2603 10/21/2019 [10085.941992] RIP: 0010:__flush_work+0x3ff/0x480 [10085.942003] Code: c0 74 6b 65 ff 0d d1 bd 78 75 e8 bc 2f 06 00 48 c7 c6 68 b1 88 8a 48 c7 c7 e0 5f b4 8b 45 31 ff e8 e6 66 04 00 e9 4b fe ff ff <0f> 0b 45 31 ff e9 41 fe ff ff e8 72 c1 79 00 85 c0 74 87 80 3d 22 [10085.942036] RSP: 0018:ffffa1744383fc08 EFLAGS: 00010246 [10085.942048] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000923 [10085.942062] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff91c901710a88 [10085.942076] RBP: ffffa1744383fce8 R08: 0000000000000001 R09: 0000000000000001 [10085.942090] R10: 00000000000000c2 R11: 0000000000000000 R12: ffff91c901710a88 [10085.942104] R13: 0000000000000000 R14: ffff91c909a96100 R15: 0000000000000001 [10085.942118] FS: 00007fe417837740(0000) GS:ffff91c969d00000(0000) knlGS:0000000000000000 [10085.942134] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [10085.942146] CR2: 000055a8d567ecd8 CR3: 0000000121690003 CR4: 00000000003706e0 [10085.942160] Call Trace: [10085.942166] ? __lock_acquire+0x3af/0x22e0 [10085.942177] ? cancel_work_sync+0xb/0x10 [10085.942187] __cancel_work_timer+0x128/0x1b0 [10085.942197] ? __pm_runtime_resume+0x5b/0x90 [10085.942208] cancel_work_sync+0xb/0x10 [10085.942217] t3_sge_stop+0x2f/0x50 [cxgb3] [10085.942234] remove_one+0x26/0x190 [cxgb3] [10085.942248] pci_device_remove+0x39/0xa0 [10085.942258] __device_release_driver+0x15e/0x240 [10085.942269] driver_detach+0xd9/0x120 [10085.942278] bus_remove_driver+0x53/0xd0 [10085.942288] driver_unregister+0x2c/0x50 [10085.942298] pci_unregister_driver+0x31/0x90 [10085.942307] cxgb3_cleanup_module+0x10/0x18c [cxgb3] [10085.942324] __do_sys_delete_module+0x191/0x250 [10085.942336] ? syscall_enter_from_user_mode+0x21/0x60 [10085.942347] ? trace_hardirqs_on+0x2a/0xe0 [10085.942357] __x64_sys_delete_module+0x13/0x20 [10085.942368] do_syscall_64+0x40/0x90 [10085.942377] entry_SYSCALL_64_after_hwframe+0x44/0xae [10085.942389] RIP: 0033:0x7fe41796323b Fixes: 5e0b892 ("net:cxgb3: replace tasklets with works") Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>

If CONFIG_BLK_DEV_LOOP && CONFIG_MTD (at least; there might be other combinations), lockdep complains circular locking dependency at __loop_clr_fd(), for major_names_lock serves as a locking dependency aggregating hub across multiple block modules. ====================================================== WARNING: possible circular locking dependency detected 5.14.0+ torvalds#757 Tainted: G E ------------------------------------------------------ systemd-udevd/7568 is trying to acquire lock: ffff88800f334d48 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x70/0x560 but task is already holding lock: ffff888014a7d4a0 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x4d/0x400 [loop] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #6 (&lo->lo_mutex){+.+.}-{3:3}: lock_acquire+0xbe/0x1f0 __mutex_lock_common+0xb6/0xe10 mutex_lock_killable_nested+0x17/0x20 lo_open+0x23/0x50 [loop] blkdev_get_by_dev+0x199/0x540 blkdev_open+0x58/0x90 do_dentry_open+0x144/0x3a0 path_openat+0xa57/0xda0 do_filp_open+0x9f/0x140 do_sys_openat2+0x71/0x150 __x64_sys_openat+0x78/0xa0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #5 (&disk->open_mutex){+.+.}-{3:3}: lock_acquire+0xbe/0x1f0 __mutex_lock_common+0xb6/0xe10 mutex_lock_nested+0x17/0x20 bd_register_pending_holders+0x20/0x100 device_add_disk+0x1ae/0x390 loop_add+0x29c/0x2d0 [loop] blk_request_module+0x5a/0xb0 blkdev_get_no_open+0x27/0xa0 blkdev_get_by_dev+0x5f/0x540 blkdev_open+0x58/0x90 do_dentry_open+0x144/0x3a0 path_openat+0xa57/0xda0 do_filp_open+0x9f/0x140 do_sys_openat2+0x71/0x150 __x64_sys_openat+0x78/0xa0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #4 (major_names_lock){+.+.}-{3:3}: lock_acquire+0xbe/0x1f0 __mutex_lock_common+0xb6/0xe10 mutex_lock_nested+0x17/0x20 blkdev_show+0x19/0x80 devinfo_show+0x52/0x60 seq_read_iter+0x2d5/0x3e0 proc_reg_read_iter+0x41/0x80 vfs_read+0x2ac/0x330 ksys_read+0x6b/0xd0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #3 (&p->lock){+.+.}-{3:3}: lock_acquire+0xbe/0x1f0 __mutex_lock_common+0xb6/0xe10 mutex_lock_nested+0x17/0x20 seq_read_iter+0x37/0x3e0 generic_file_splice_read+0xf3/0x170 splice_direct_to_actor+0x14e/0x350 do_splice_direct+0x84/0xd0 do_sendfile+0x263/0x430 __se_sys_sendfile64+0x96/0xc0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #2 (sb_writers#3){.+.+}-{0:0}: lock_acquire+0xbe/0x1f0 lo_write_bvec+0x96/0x280 [loop] loop_process_work+0xa68/0xc10 [loop] process_one_work+0x293/0x480 worker_thread+0x23d/0x4b0 kthread+0x163/0x180 ret_from_fork+0x1f/0x30 -> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}: lock_acquire+0xbe/0x1f0 process_one_work+0x280/0x480 worker_thread+0x23d/0x4b0 kthread+0x163/0x180 ret_from_fork+0x1f/0x30 -> #0 ((wq_completion)loop0){+.+.}-{0:0}: validate_chain+0x1f0d/0x33e0 __lock_acquire+0x92d/0x1030 lock_acquire+0xbe/0x1f0 flush_workqueue+0x8c/0x560 drain_workqueue+0x80/0x140 destroy_workqueue+0x47/0x4f0 __loop_clr_fd+0xb4/0x400 [loop] blkdev_put+0x14a/0x1d0 blkdev_close+0x1c/0x20 __fput+0xfd/0x220 task_work_run+0x69/0xc0 exit_to_user_mode_prepare+0x1ce/0x1f0 syscall_exit_to_user_mode+0x26/0x60 do_syscall_64+0x4c/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: (wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&lo->lo_mutex); lock(&disk->open_mutex); lock(&lo->lo_mutex); lock((wq_completion)loop0); *** DEADLOCK *** 2 locks held by systemd-udevd/7568: #0: ffff888012554128 (&disk->open_mutex){+.+.}-{3:3}, at: blkdev_put+0x4c/0x1d0 #1: ffff888014a7d4a0 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x4d/0x400 [loop] stack backtrace: CPU: 0 PID: 7568 Comm: systemd-udevd Tainted: G E 5.14.0+ torvalds#757 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020 Call Trace: dump_stack_lvl+0x79/0xbf print_circular_bug+0x5d6/0x5e0 ? stack_trace_save+0x42/0x60 ? save_trace+0x3d/0x2d0 check_noncircular+0x10b/0x120 validate_chain+0x1f0d/0x33e0 ? __lock_acquire+0x953/0x1030 ? __lock_acquire+0x953/0x1030 __lock_acquire+0x92d/0x1030 ? flush_workqueue+0x70/0x560 lock_acquire+0xbe/0x1f0 ? flush_workqueue+0x70/0x560 flush_workqueue+0x8c/0x560 ? flush_workqueue+0x70/0x560 ? sched_clock_cpu+0xe/0x1a0 ? drain_workqueue+0x41/0x140 drain_workqueue+0x80/0x140 destroy_workqueue+0x47/0x4f0 ? blk_mq_freeze_queue_wait+0xac/0xd0 __loop_clr_fd+0xb4/0x400 [loop] ? __mutex_unlock_slowpath+0x35/0x230 blkdev_put+0x14a/0x1d0 blkdev_close+0x1c/0x20 __fput+0xfd/0x220 task_work_run+0x69/0xc0 exit_to_user_mode_prepare+0x1ce/0x1f0 syscall_exit_to_user_mode+0x26/0x60 do_syscall_64+0x4c/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f0fd4c661f7 Code: 00 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 13 fc ff ff RSP: 002b:00007ffd1c9e9fd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 00007f0fd46be6c8 RCX: 00007f0fd4c661f7 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000006 RBP: 0000000000000006 R08: 000055fff1eaf400 R09: 0000000000000000 R10: 00007f0fd46be6c8 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000002f08 R15: 00007ffd1c9ea050 Commit 1c500ad ("loop: reduce the loop_ctl_mutex scope") is for breaking "loop_ctl_mutex => &lo->lo_mutex" dependency chain. But enabling a different block module results in forming circular locking dependency due to shared major_names_lock mutex. The simplest fix is to call probe function without holding major_names_lock [1], but Christoph Hellwig does not like such idea. Therefore, instead of holding major_names_lock in blkdev_show(), introduce a different lock for blkdev_show() in order to break "sb_writers#$N => &p->lock => major_names_lock" dependency chain. Link: https://lkml.kernel.org/r/[email protected] [1] Signed-off-by: Tetsuo Handa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>

It's later supposed to be either a correct address or NULL. Without the initialization, it may contain an undefined value which results in the following segmentation fault: # perf top --sort comm -g --ignore-callees=do_idle terminates with: #0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6 #1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6 #2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489 #3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564 #4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420, sample_self=sample_self@entry=true) at util/hist.c:657 #5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0, sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288 #6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38) at util/hist.c:1056 #7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056 #8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0) at util/hist.c:1231 #9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0) at builtin-top.c:842 #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202 #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244 #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323 #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339 #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341 #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339 #16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114 #17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0 #18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6 If you look at the frame #2, the code is: 488 if (he->srcline) { 489 he->srcline = strdup(he->srcline); 490 if (he->srcline == NULL) 491 goto err_rawdata; 492 } If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish), it gets strdupped and strdupping a rubbish random string causes the problem. Also, if you look at the commit 1fb7d06, it adds the srcline property into the struct, but not initializing it everywhere needed. Committer notes: Now I see, when using --ignore-callees=do_idle we end up here at line 2189 in add_callchain_ip(): 2181 if (al.sym != NULL) { 2182 if (perf_hpp_list.parent && !*parent && 2183 symbol__match_regex(al.sym, &parent_regex)) 2184 *parent = al.sym; 2185 else if (have_ignore_callees && root_al && 2186 symbol__match_regex(al.sym, &ignore_callees_regex)) { 2187 /* Treat this symbol as the root, 2188 forgetting its callees. */ 2189 *root_al = al; 2190 callchain_cursor_reset(cursor); 2191 } 2192 } And the al that doesn't have the ->srcline field initialized will be copied to the root_al, so then, back to: 1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, 1212 int max_stack_depth, void *arg) 1213 { 1214 int err, err2; 1215 struct map *alm = NULL; 1216 1217 if (al) 1218 alm = map__get(al->map); 1219 1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent, 1221 iter->evsel, al, max_stack_depth); 1222 if (err) { 1223 map__put(alm); 1224 return err; 1225 } 1226 1227 err = iter->ops->prepare_entry(iter, al); 1228 if (err) 1229 goto out; 1230 1231 err = iter->ops->add_single_entry(iter, al); 1232 if (err) 1233 goto out; 1234 That al at line 1221 is what hist_entry_iter__add() (called from sample__resolve_callchain()) saw as 'root_al', and then: iter->ops->add_single_entry(iter, al); will go on with al->srcline with a bogus value, I'll add the above sequence to the cset and apply, thanks! Signed-off-by: Michael Petlan <[email protected]> CC: Milian Wolff <[email protected]> Cc: Jiri Olsa <[email protected]> Fixes: 1fb7d06 ("perf report Use srcline from callchain for hist entries") Link: https //lore.kernel.org/r/[email protected] Reported-by: Juri Lelli <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

FD uses xyarray__entry that may return NULL if an index is out of bounds. If NULL is returned then a segv happens as FD unconditionally dereferences the pointer. This was happening in a case of with perf iostat as shown below. The fix is to make FD an "int*" rather than an int and handle the NULL case as either invalid input or a closed fd. $ sudo gdb --args perf stat --iostat list ... Breakpoint 1, perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50 50 { (gdb) bt #0 perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50 #1 0x000055555585c188 in evsel__open_cpu (evsel=0x5555560951a0, cpus=0x555556093410, threads=0x555556086fb0, start_cpu=0, end_cpu=1) at util/evsel.c:1792 #2 0x000055555585cfb2 in evsel__open (evsel=0x5555560951a0, cpus=0x0, threads=0x555556086fb0) at util/evsel.c:2045 #3 0x000055555585d0db in evsel__open_per_thread (evsel=0x5555560951a0, threads=0x555556086fb0) at util/evsel.c:2065 #4 0x00005555558ece64 in create_perf_stat_counter (evsel=0x5555560951a0, config=0x555555c34700 <stat_config>, target=0x555555c2f1c0 <target>, cpu=0) at util/stat.c:590 #5 0x000055555578e927 in __run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0) at builtin-stat.c:833 #6 0x000055555578f3c6 in run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0) at builtin-stat.c:1048 #7 0x0000555555792ee5 in cmd_stat (argc=1, argv=0x7fffffffe4a0) at builtin-stat.c:2534 #8 0x0000555555835ed3 in run_builtin (p=0x555555c3f540 <commands+288>, argc=3, argv=0x7fffffffe4a0) at perf.c:313 #9 0x0000555555836154 in handle_internal_command (argc=3, argv=0x7fffffffe4a0) at perf.c:365 #10 0x000055555583629f in run_argv (argcp=0x7fffffffe2ec, argv=0x7fffffffe2e0) at perf.c:409 #11 0x0000555555836692 in main (argc=3, argv=0x7fffffffe4a0) at perf.c:539 ... (gdb) c Continuing. Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/). /bin/dmesg | grep -i perf may provide additional information. Program received signal SIGSEGV, Segmentation fault. 0x00005555559b03ea in perf_evsel__close_fd_cpu (evsel=0x5555560951a0, cpu=1) at evsel.c:166 166 if (FD(evsel, cpu, thread) >= 0) v3. fixes a bug in perf_evsel__run_ioctl where the sense of a branch was backward. Signed-off-by: Ian Rogers <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

Host crashes when pci_enable_atomic_ops_to_root() is called for VFs with virtual buses. The virtual buses added to SR-IOV have bus->self set to NULL and host crashes due to this. PID: 4481 TASK: ffff89c6941b0000 CPU: 53 COMMAND: "bash" ... #3 [ffff9a9481713808] oops_end at ffffffffb9025cd6 #4 [ffff9a9481713828] page_fault_oops at ffffffffb906e417 #5 [ffff9a9481713888] exc_page_fault at ffffffffb9a0ad14 #6 [ffff9a94817138b0] asm_exc_page_fault at ffffffffb9c00ace [exception RIP: pcie_capability_read_dword+28] RIP: ffffffffb952fd5c RSP: ffff9a9481713960 RFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff89c6b1096000 RCX: 0000000000000000 RDX: ffff9a9481713990 RSI: 0000000000000024 RDI: 0000000000000000 RBP: 0000000000000080 R8: 0000000000000008 R9: ffff89c64341a2f8 R10: 0000000000000002 R11: 0000000000000000 R12: ffff89c648bab000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff89c648bab0c8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff9a9481713988] pci_enable_atomic_ops_to_root at ffffffffb95359a6 #8 [ffff9a94817139c0] bnxt_qplib_determine_atomics at ffffffffc08c1a33 [bnxt_re] #9 [ffff9a94817139d0] bnxt_re_dev_init at ffffffffc08ba2d1 [bnxt_re] Per PCIe r5.0, sec 9.3.5.10, the AtomicOp Requester Enable bit in Device Control 2 is reserved for VFs. The PF value applies to all associated PFs. Return -EINVAL if pci_enable_atomic_ops_to_root() is called for a VF. Link: https://lore.kernel.org/r/[email protected] Fixes: 35f5ace ("RDMA/bnxt_re: Enable global atomic ops if platform supports") Fixes: 430a236 ("PCI: Add pci_enable_atomic_ops_to_root()") Signed-off-by: Selvin Xavier <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Andy Gospodarek <[email protected]>

Host crashes when pci_enable_atomic_ops_to_root() is called for VFs with virtual buses. The virtual buses added to SR-IOV have bus->self set to NULL and host crashes due to this. PID: 4481 TASK: ffff89c6941b0000 CPU: 53 COMMAND: "bash" ... #3 [ffff9a9481713808] oops_end at ffffffffb9025cd6 #4 [ffff9a9481713828] page_fault_oops at ffffffffb906e417 #5 [ffff9a9481713888] exc_page_fault at ffffffffb9a0ad14 #6 [ffff9a94817138b0] asm_exc_page_fault at ffffffffb9c00ace [exception RIP: pcie_capability_read_dword+28] RIP: ffffffffb952fd5c RSP: ffff9a9481713960 RFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff89c6b1096000 RCX: 0000000000000000 RDX: ffff9a9481713990 RSI: 0000000000000024 RDI: 0000000000000000 RBP: 0000000000000080 R8: 0000000000000008 R9: ffff89c64341a2f8 R10: 0000000000000002 R11: 0000000000000000 R12: ffff89c648bab000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff89c648bab0c8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff9a9481713988] pci_enable_atomic_ops_to_root at ffffffffb95359a6 #8 [ffff9a94817139c0] bnxt_qplib_determine_atomics at ffffffffc08c1a33 [bnxt_re] #9 [ffff9a94817139d0] bnxt_re_dev_init at ffffffffc08ba2d1 [bnxt_re] Per PCIe r5.0, sec 9.3.5.10, the AtomicOp Requester Enable bit in Device Control 2 is reserved for VFs. The PF value applies to all associated VFs. Return -EINVAL if pci_enable_atomic_ops_to_root() is called for a VF. Link: https://lore.kernel.org/r/[email protected] Fixes: 35f5ace ("RDMA/bnxt_re: Enable global atomic ops if platform supports") Fixes: 430a236 ("PCI: Add pci_enable_atomic_ops_to_root()") Signed-off-by: Selvin Xavier <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Andy Gospodarek <[email protected]>

It is generally unsafe to call put_device() with dpm_list_mtx held, because the given device's release routine may carry out an action depending on that lock which then may deadlock, so modify the system-wide suspend and resume of devices to always drop dpm_list_mtx before calling put_device() (and adjust white space somewhat while at it). For instance, this prevents the following splat from showing up in the kernel log after a system resume in certain configurations: [ 3290.969514] ====================================================== [ 3290.969517] WARNING: possible circular locking dependency detected [ 3290.969519] 5.15.0+ #2420 Tainted: G S [ 3290.969523] ------------------------------------------------------ [ 3290.969525] systemd-sleep/4553 is trying to acquire lock: [ 3290.969529] ffff888117ab1138 ((wq_completion)hci0#2){+.+.}-{0:0}, at: flush_workqueue+0x87/0x4a0 [ 3290.969554] but task is already holding lock: [ 3290.969556] ffffffff8280fca8 (dpm_list_mtx){+.+.}-{3:3}, at: dpm_resume+0x12e/0x3e0 [ 3290.969571] which lock already depends on the new lock. [ 3290.969573] the existing dependency chain (in reverse order) is: [ 3290.969575] -> #3 (dpm_list_mtx){+.+.}-{3:3}: [ 3290.969583] __mutex_lock+0x9d/0xa30 [ 3290.969591] device_pm_add+0x2e/0xe0 [ 3290.969597] device_add+0x4d5/0x8f0 [ 3290.969605] hci_conn_add_sysfs+0x43/0xb0 [bluetooth] [ 3290.969689] hci_conn_complete_evt.isra.71+0x124/0x750 [bluetooth] [ 3290.969747] hci_event_packet+0xd6c/0x28a0 [bluetooth] [ 3290.969798] hci_rx_work+0x213/0x640 [bluetooth] [ 3290.969842] process_one_work+0x2aa/0x650 [ 3290.969851] worker_thread+0x39/0x400 [ 3290.969859] kthread+0x142/0x170 [ 3290.969865] ret_from_fork+0x22/0x30 [ 3290.969872] -> #2 (&hdev->lock){+.+.}-{3:3}: [ 3290.969881] __mutex_lock+0x9d/0xa30 [ 3290.969887] hci_event_packet+0xba/0x28a0 [bluetooth] [ 3290.969935] hci_rx_work+0x213/0x640 [bluetooth] [ 3290.969978] process_one_work+0x2aa/0x650 [ 3290.969985] worker_thread+0x39/0x400 [ 3290.969993] kthread+0x142/0x170 [ 3290.969999] ret_from_fork+0x22/0x30 [ 3290.970004] -> #1 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}: [ 3290.970013] process_one_work+0x27d/0x650 [ 3290.970020] worker_thread+0x39/0x400 [ 3290.970028] kthread+0x142/0x170 [ 3290.970033] ret_from_fork+0x22/0x30 [ 3290.970038] -> #0 ((wq_completion)hci0#2){+.+.}-{0:0}: [ 3290.970047] __lock_acquire+0x15cb/0x1b50 [ 3290.970054] lock_acquire+0x26c/0x300 [ 3290.970059] flush_workqueue+0xae/0x4a0 [ 3290.970066] drain_workqueue+0xa1/0x130 [ 3290.970073] destroy_workqueue+0x34/0x1f0 [ 3290.970081] hci_release_dev+0x49/0x180 [bluetooth] [ 3290.970130] bt_host_release+0x1d/0x30 [bluetooth] [ 3290.970195] device_release+0x33/0x90 [ 3290.970201] kobject_release+0x63/0x160 [ 3290.970211] dpm_resume+0x164/0x3e0 [ 3290.970215] dpm_resume_end+0xd/0x20 [ 3290.970220] suspend_devices_and_enter+0x1a4/0xba0 [ 3290.970229] pm_suspend+0x26b/0x310 [ 3290.970236] state_store+0x42/0x90 [ 3290.970243] kernfs_fop_write_iter+0x135/0x1b0 [ 3290.970251] new_sync_write+0x125/0x1c0 [ 3290.970257] vfs_write+0x360/0x3c0 [ 3290.970263] ksys_write+0xa7/0xe0 [ 3290.970269] do_syscall_64+0x3a/0x80 [ 3290.970276] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3290.970284] other info that might help us debug this: [ 3290.970285] Chain exists of: (wq_completion)hci0#2 --> &hdev->lock --> dpm_list_mtx [ 3290.970297] Possible unsafe locking scenario: [ 3290.970299] CPU0 CPU1 [ 3290.970300] ---- ---- [ 3290.970302] lock(dpm_list_mtx); [ 3290.970306] lock(&hdev->lock); [ 3290.970310] lock(dpm_list_mtx); [ 3290.970314] lock((wq_completion)hci0#2); [ 3290.970319] *** DEADLOCK *** [ 3290.970321] 7 locks held by systemd-sleep/4553: [ 3290.970325] #0: ffff888103bcd448 (sb_writers#4){.+.+}-{0:0}, at: ksys_write+0xa7/0xe0 [ 3290.970341] #1: ffff888115a14488 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x103/0x1b0 [ 3290.970355] #2: ffff888100f719e0 (kn->active#233){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x10c/0x1b0 [ 3290.970369] #3: ffffffff82661048 (autosleep_lock){+.+.}-{3:3}, at: state_store+0x12/0x90 [ 3290.970384] #4: ffffffff82658ac8 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x9f/0x310 [ 3290.970399] #5: ffffffff827f2a48 (acpi_scan_lock){+.+.}-{3:3}, at: acpi_suspend_begin+0x4c/0x80 [ 3290.970416] #6: ffffffff8280fca8 (dpm_list_mtx){+.+.}-{3:3}, at: dpm_resume+0x12e/0x3e0 [ 3290.970428] stack backtrace: [ 3290.970431] CPU: 3 PID: 4553 Comm: systemd-sleep Tainted: G S 5.15.0+ #2420 [ 3290.970438] Hardware name: Dell Inc. XPS 13 9380/0RYJWW, BIOS 1.5.0 06/03/2019 [ 3290.970441] Call Trace: [ 3290.970446] dump_stack_lvl+0x44/0x57 [ 3290.970454] check_noncircular+0x105/0x120 [ 3290.970468] ? __lock_acquire+0x15cb/0x1b50 [ 3290.970474] __lock_acquire+0x15cb/0x1b50 [ 3290.970487] lock_acquire+0x26c/0x300 [ 3290.970493] ? flush_workqueue+0x87/0x4a0 [ 3290.970503] ? __raw_spin_lock_init+0x3b/0x60 [ 3290.970510] ? lockdep_init_map_type+0x58/0x240 [ 3290.970519] flush_workqueue+0xae/0x4a0 [ 3290.970526] ? flush_workqueue+0x87/0x4a0 [ 3290.970544] ? drain_workqueue+0xa1/0x130 [ 3290.970552] drain_workqueue+0xa1/0x130 [ 3290.970561] destroy_workqueue+0x34/0x1f0 [ 3290.970572] hci_release_dev+0x49/0x180 [bluetooth] [ 3290.970624] bt_host_release+0x1d/0x30 [bluetooth] [ 3290.970687] device_release+0x33/0x90 [ 3290.970695] kobject_release+0x63/0x160 [ 3290.970705] dpm_resume+0x164/0x3e0 [ 3290.970710] ? dpm_resume_early+0x251/0x3b0 [ 3290.970718] dpm_resume_end+0xd/0x20 [ 3290.970723] suspend_devices_and_enter+0x1a4/0xba0 [ 3290.970737] pm_suspend+0x26b/0x310 [ 3290.970746] state_store+0x42/0x90 [ 3290.970755] kernfs_fop_write_iter+0x135/0x1b0 [ 3290.970764] new_sync_write+0x125/0x1c0 [ 3290.970777] vfs_write+0x360/0x3c0 [ 3290.970785] ksys_write+0xa7/0xe0 [ 3290.970794] do_syscall_64+0x3a/0x80 [ 3290.970803] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3290.970811] RIP: 0033:0x7f41b1328164 [ 3290.970819] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00 00 8b 05 4a d2 2c 00 48 63 ff 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 55 53 48 89 d5 48 89 f3 48 83 [ 3290.970824] RSP: 002b:00007ffe6ae21b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 3290.970831] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f41b1328164 [ 3290.970836] RDX: 0000000000000004 RSI: 000055965e651070 RDI: 0000000000000004 [ 3290.970839] RBP: 000055965e651070 R08: 000055965e64f390 R09: 00007f41b1e3d1c0 [ 3290.970843] R10: 000000000000000a R11: 0000000000000246 R12: 0000000000000004 [ 3290.970846] R13: 0000000000000001 R14: 000055965e64f2b0 R15: 0000000000000004 Cc: All applicable <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>

Patch series "Solve silent data loss caused by poisoned page cache (shmem/tmpfs)", v5. When discussing the patch that splits page cache THP in order to offline the poisoned page, Noaya mentioned there is a bigger problem [1] that prevents this from working since the page cache page will be truncated if uncorrectable errors happen. By looking this deeper it turns out this approach (truncating poisoned page) may incur silent data loss for all non-readonly filesystems if the page is dirty. It may be worse for in-memory filesystem, e.g. shmem/tmpfs since the data blocks are actually gone. To solve this problem we could keep the poisoned dirty page in page cache then notify the users on any later access, e.g. page fault, read/write, etc. The clean page could be truncated as is since they can be reread from disk later on. The consequence is the filesystems may find poisoned page and manipulate it as healthy page since all the filesystems actually don't check if the page is poisoned or not in all the relevant paths except page fault. In general, we need make the filesystems be aware of poisoned page before we could keep the poisoned page in page cache in order to solve the data loss problem. To make filesystems be aware of poisoned page we should consider: - The page should be not written back: clearing dirty flag could prevent from writeback. - The page should not be dropped (it shows as a clean page) by drop caches or other callers: the refcount pin from hwpoison could prevent from invalidating (called by cache drop, inode cache shrinking, etc), but it doesn't avoid invalidation in DIO path. - The page should be able to get truncated/hole punched/unlinked: it works as it is. - Notify users when the page is accessed, e.g. read/write, page fault and other paths (compression, encryption, etc). The scope of the last one is huge since almost all filesystems need do it once a page is returned from page cache lookup. There are a couple of options to do it: 1. Check hwpoison flag for every path, the most straightforward way. 2. Return NULL for poisoned page from page cache lookup, the most callsites check if NULL is returned, this should have least work I think. But the error handling in filesystems just return -ENOMEM, the error code will incur confusion to the users obviously. 3. To improve #2, we could return error pointer, e.g. ERR_PTR(-EIO), but this will involve significant amount of code change as well since all the paths need check if the pointer is ERR or not just like option #1. I did prototypes for both #1 and #3, but it seems #3 may require more changes than #1. For #3 ERR_PTR will be returned so all the callers need to check the return value otherwise invalid pointer may be dereferenced, but not all callers really care about the content of the page, for example, partial truncate which just sets the truncated range in one page to 0. So for such paths it needs additional modification if ERR_PTR is returned. And if the callers have their own way to handle the problematic pages we need to add a new FGP flag to tell FGP functions to return the pointer to the page. It may happen very rarely, but once it happens the consequence (data corruption) could be very bad and it is very hard to debug. It seems this problem had been slightly discussed before, but seems no action was taken at that time. [2] As the aforementioned investigation, it needs huge amount of work to solve the potential data loss for all filesystems. But it is much easier for in-memory filesystems and such filesystems actually suffer more than others since even the data blocks are gone due to truncating. So this patchset starts from shmem/tmpfs by taking option #1. TODO: * The unpoison has been broken since commit 0ed950d ("mm,hwpoison: make get_hwpoison_page() call get_any_page()"), and this patch series make refcount check for unpoisoning shmem page fail. * Expand to other filesystems. But I haven't heard feedback from filesystem developers yet. Patch breakdown: Patch #1: cleanup, depended by patch #2 Patch #2: fix THP with hwpoisoned subpage(s) PMD map bug Patch #3: coding style cleanup Patch #4: refactor and preparation. Patch #5: keep the poisoned page in page cache and handle such case for all the paths. Patch #6: the previous patches unblock page cache THP split, so this patch add page cache THP split support. This patch (of 4): A minor cleanup to the indent. Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Yang Shi <[email protected]> Reviewed-by: Naoya Horiguchi <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Kirill A. Shutemov <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Oscar Salvador <[email protected]> Cc: Peter Xu <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

The exit function fixes a memory leak with the src field as detected by leak sanitizer. An example of which is: Indirect leak of 25133184 byte(s) in 207 object(s) allocated from: #0 0x7f199ecfe987 in __interceptor_calloc libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x55defe638224 in annotated_source__alloc_histograms util/annotate.c:803 #2 0x55defe6397e4 in symbol__hists util/annotate.c:952 #3 0x55defe639908 in symbol__inc_addr_samples util/annotate.c:968 #4 0x55defe63aa29 in hist_entry__inc_addr_samples util/annotate.c:1119 #5 0x55defe499a79 in hist_iter__report_callback tools/perf/builtin-report.c:182 #6 0x55defe7a859d in hist_entry_iter__add util/hist.c:1236 #7 0x55defe49aa63 in process_sample_event tools/perf/builtin-report.c:315 #8 0x55defe731bc8 in evlist__deliver_sample util/session.c:1473 #9 0x55defe731e38 in machines__deliver_event util/session.c:1510 #10 0x55defe732a23 in perf_session__deliver_event util/session.c:1590 #11 0x55defe72951e in ordered_events__deliver_event util/session.c:183 #12 0x55defe740082 in do_flush util/ordered-events.c:244 #13 0x55defe7407cb in __ordered_events__flush util/ordered-events.c:323 #14 0x55defe740a61 in ordered_events__flush util/ordered-events.c:341 #15 0x55defe73837f in __perf_session__process_events util/session.c:2390 #16 0x55defe7385ff in perf_session__process_events util/session.c:2420 ... Signed-off-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Martin Liška <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

To clear a user buffer we cannot simply use memset, we have to use clear_user(). With a virtio-mem device that registers a vmcore_cb and has some logically unplugged memory inside an added Linux memory block, I can easily trigger a BUG by copying the vmcore via "cp": systemd[1]: Starting Kdump Vmcore Save Service... kdump[420]: Kdump is using the default log level(3). kdump[453]: saving to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[458]: saving vmcore-dmesg.txt to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[465]: saving vmcore-dmesg.txt complete kdump[467]: saving vmcore BUG: unable to handle page fault for address: 00007f2374e01000 #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation PGD 7a523067 P4D 7a523067 PUD 7a528067 PMD 7a525067 PTE 800000007048f867 Oops: 0003 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 468 Comm: cp Not tainted 5.15.0+ #6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-27-g64f37cc530f1-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_from_oldmem.part.0.cold+0x1d/0x86 Code: ff ff ff e8 05 ff fe ff e9 b9 e9 7f ff 48 89 de 48 c7 c7 38 3b 60 82 e8 f1 fe fe ff 83 fd 08 72 3c 49 8d 7d 08 4c 89 e9 89 e8 <49> c7 45 00 00 00 00 00 49 c7 44 05 f8 00 00 00 00 48 83 e7 f81 RSP: 0018:ffffc9000073be08 EFLAGS: 00010212 RAX: 0000000000001000 RBX: 00000000002fd000 RCX: 00007f2374e01000 RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00007f2374e01008 RBP: 0000000000001000 R08: 0000000000000000 R09: ffffc9000073bc50 R10: ffffc9000073bc48 R11: ffffffff829461a8 R12: 000000000000f000 R13: 00007f2374e01000 R14: 0000000000000000 R15: ffff88807bd421e8 FS: 00007f2374e12140(0000) GS:ffff88807f000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2374e01000 CR3: 000000007a4aa000 CR4: 0000000000350eb0 Call Trace: read_vmcore+0x236/0x2c0 proc_reg_read+0x55/0xa0 vfs_read+0x95/0x190 ksys_read+0x4f/0xc0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Some x86-64 CPUs have a CPU feature called "Supervisor Mode Access Prevention (SMAP)", which is used to detect wrong access from the kernel to user buffers like this: SMAP triggers a permissions violation on wrong access. In the x86-64 variant of clear_user(), SMAP is properly handled via clac()+stac(). To fix, properly use clear_user() when we're dealing with a user buffer. Link: https://lkml.kernel.org/r/[email protected] Fixes: 997c136 ("fs/proc/vmcore.c: add hook to read_from_oldmem() to check for non-ram pages") Signed-off-by: David Hildenbrand <[email protected]> Acked-by: Baoquan He <[email protected]> Cc: Dave Young <[email protected]> Cc: Baoquan He <[email protected]> Cc: Vivek Goyal <[email protected]> Cc: Philipp Rudo <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

The irqchip ops are called with a raw spinlock held, so the subsequent regmap usage cannot use a plain spinlock. spi-hid-apple-of spi0.0: spihid_apple_of_probe:74 ============================= [ BUG: Invalid wait context ] 5.18.0-asahi-00176-g0fa3ab03bdea #1337 Not tainted ----------------------------- kworker/u20:3/86 is trying to lock: ffff8000166b5018 (pinctrl_apple_gpio:462:(&regmap_config)->lock){....}-{3:3}, at: regmap_lock_spinlock+0x18/0x30 other info that might help us debug this: context-{5:5} 7 locks held by kworker/u20:3/86: #0: ffff800017725d48 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1c8/0x670 #1: ffff80001e33bdd0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1c8/0x670 #2: ffff800017d629a0 (&dev->mutex){....}-{4:4}, at: __device_attach+0x30/0x17c #3: ffff80002414e618 (&ctlr->add_lock){+.+.}-{4:4}, at: spi_add_device+0x40/0x80 #4: ffff800024116990 (&dev->mutex){....}-{4:4}, at: __device_attach+0x30/0x17c #5: ffff800022d4be58 (request_class){+.+.}-{4:4}, at: __setup_irq+0xa8/0x720 #6: ffff800022d4bcc8 (lock_class){....}-{2:2}, at: __setup_irq+0xcc/0x720 Fixes: a0f160f ("pinctrl: add pinctrl/GPIO driver for Apple SoCs") Signed-off-by: Hector Martin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>

Send along the already-allocated fattr along with nfs4_fs_locations, and drop the memcpy of fattr. We end up growing two more allocations, but this fixes up a crash as: PID: 790 TASK: ffff88811b43c000 CPU: 0 COMMAND: "ls" #0 [ffffc90000857920] panic at ffffffff81b9bfde #1 [ffffc900008579c0] do_trap at ffffffff81023a9b #2 [ffffc90000857a10] do_error_trap at ffffffff81023b78 #3 [ffffc90000857a58] exc_stack_segment at ffffffff81be1f45 #4 [ffffc90000857a80] asm_exc_stack_segment at ffffffff81c009de #5 [ffffc90000857b08] nfs_lookup at ffffffffa0302322 [nfs] #6 [ffffc90000857b70] __lookup_slow at ffffffff813a4a5f #7 [ffffc90000857c60] walk_component at ffffffff813a86c4 #8 [ffffc90000857cb8] path_lookupat at ffffffff813a9553 #9 [ffffc90000857cf0] filename_lookup at ffffffff813ab86b Suggested-by: Trond Myklebust <[email protected]> Fixes: 9558a00 ("NFS: Remove the label from the nfs4_lookup_res struct") Signed-off-by: Benjamin Coddington <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>

Backport CStr improvement to remove need for a nightly feature

…tion Each cset (css_set) is pinned by its tasks. When we're moving tasks around across csets for a migration, we need to hold the source and destination csets to ensure that they don't go away while we're moving tasks about. This is done by linking cset->mg_preload_node on either the mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the same cset->mg_preload_node for both the src and dst lists was deemed okay as a cset can't be both the source and destination at the same time. Unfortunately, this overloading becomes problematic when multiple tasks are involved in a migration and some of them are identity noop migrations while others are actually moving across cgroups. For example, this can happen with the following sequence on cgroup1: #1> mkdir -p /sys/fs/cgroup/misc/a/b AsahiLinux#2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs AsahiLinux#3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS & AsahiLinux#4> PID=$! AsahiLinux#5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks AsahiLinux#6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs the process including the group leader back into a. In this final migration, non-leader threads would be doing identity migration while the group leader is doing an actual one. After AsahiLinux#3, let's say the whole process was in cset A, and that after AsahiLinux#4, the leader moves to cset B. Then, during AsahiLinux#6, the following happens: 1. cgroup_migrate_add_src() is called on B for the leader. 2. cgroup_migrate_add_src() is called on A for the other threads. 3. cgroup_migrate_prepare_dst() is called. It scans the src list. 4. It notices that B wants to migrate to A, so it tries to A to the dst list but realizes that its ->mg_preload_node is already busy. 5. and then it notices A wants to migrate to A as it's an identity migration, it culls it by list_del_init()'ing its ->mg_preload_node and putting references accordingly. 6. The rest of migration takes place with B on the src list but nothing on the dst list. This means that A isn't held while migration is in progress. If all tasks leave A before the migration finishes and the incoming task pins it, the cset will be destroyed leading to use-after-free. This is caused by overloading cset->mg_preload_node for both src and dst preload lists. We wanted to exclude the cset from the src list but ended up inadvertently excluding it from the dst list too. This patch fixes the issue by separating out cset->mg_preload_node into ->mg_src_preload_node and ->mg_dst_preload_node, so that the src and dst preloadings don't interfere with each other. Signed-off-by: Tejun Heo <[email protected]> Reported-by: Mukesh Ojha <[email protected]> Reported-by: shisiyuan <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Link: https://www.spinics.net/lists/cgroups/msg33313.html Fixes: f817de9 ("cgroup: prepare migration path for unified hierarchy") Cc: [email protected] # v3.16+

tl;dr: The Enhanced IBRS mitigation for Spectre v2 does not work as documented for RET instructions after VM exits. Mitigate it with a new one-entry RSB stuffing mechanism and a new LFENCE. == Background == Indirect Branch Restricted Speculation (IBRS) was designed to help mitigate Branch Target Injection and Speculative Store Bypass, i.e. Spectre, attacks. IBRS prevents software run in less privileged modes from affecting branch prediction in more privileged modes. IBRS requires the MSR to be written on every privilege level change. To overcome some of the performance issues of IBRS, Enhanced IBRS was introduced. eIBRS is an "always on" IBRS, in other words, just turn it on once instead of writing the MSR on every privilege level change. When eIBRS is enabled, more privileged modes should be protected from less privileged modes, including protecting VMMs from guests. == Problem == Here's a simplification of how guests are run on Linux' KVM: void run_kvm_guest(void) { // Prepare to run guest VMRESUME(); // Clean up after guest runs } The execution flow for that would look something like this to the processor: 1. Host-side: call run_kvm_guest() 2. Host-side: VMRESUME 3. Guest runs, does "CALL guest_function" 4. VM exit, host runs again 5. Host might make some "cleanup" function calls 6. Host-side: RET from run_kvm_guest() Now, when back on the host, there are a couple of possible scenarios of post-guest activity the host needs to do before executing host code: * on pre-eIBRS hardware (legacy IBRS, or nothing at all), the RSB is not touched and Linux has to do a 32-entry stuffing. * on eIBRS hardware, VM exit with IBRS enabled, or restoring the host IBRS=1 shortly after VM exit, has a documented side effect of flushing the RSB except in this PBRSB situation where the software needs to stuff the last RSB entry "by hand". IOW, with eIBRS supported, host RET instructions should no longer be influenced by guest behavior after the host retires a single CALL instruction. However, if the RET instructions are "unbalanced" with CALLs after a VM exit as is the RET in #6, it might speculatively use the address for the instruction after the CALL in #3 as an RSB prediction. This is a problem since the (untrusted) guest controls this address. Balanced CALL/RET instruction pairs such as in step #5 are not affected. == Solution == The PBRSB issue affects a wide variety of Intel processors which support eIBRS. But not all of them need mitigation. Today, X86_FEATURE_RSB_VMEXIT triggers an RSB filling sequence that mitigates PBRSB. Systems setting RSB_VMEXIT need no further mitigation - i.e., eIBRS systems which enable legacy IBRS explicitly. However, such systems (X86_FEATURE_IBRS_ENHANCED) do not set RSB_VMEXIT and most of them need a new mitigation. Therefore, introduce a new feature flag X86_FEATURE_RSB_VMEXIT_LITE which triggers a lighter-weight PBRSB mitigation versus RSB_VMEXIT. The lighter-weight mitigation performs a CALL instruction which is immediately followed by a speculative execution barrier (INT3). This steers speculative execution to the barrier -- just like a retpoline -- which ensures that speculation can never reach an unbalanced RET. Then, ensure this CALL is retired before continuing execution with an LFENCE. In other words, the window of exposure is opened at VM exit where RET behavior is troublesome. While the window is open, force RSB predictions sampling for RET targets to a dead end at the INT3. Close the window with the LFENCE. There is a subset of eIBRS systems which are not vulnerable to PBRSB. Add these systems to the cpu_vuln_whitelist[] as NO_EIBRS_PBRSB. Future systems that aren't vulnerable will set ARCH_CAP_PBRSB_NO. [ bp: Massage, incorporate review comments from Andy Cooper. ] Signed-off-by: Daniel Sneddon <[email protected]> Co-developed-by: Pawan Gupta <[email protected]> Signed-off-by: Pawan Gupta <[email protected]> Signed-off-by: Borislav Petkov <[email protected]>

When use 'echo c > /proc/sysrq-trigger' to trigger kdump, riscv_crash_save_regs() will be called to save regs for vmcore, we found "epc" value 00ffffffa5537400 is not a valid kernel virtual address, but is a user virtual address. Other regs(eg, ra, sp, gp...) are correct kernel virtual address. Actually 0x00ffffffb0dd9400 is the user mode PC of 'PID: 113 Comm: sh', which is saved in the task's stack. [ 21.201701] CPU: 0 PID: 113 Comm: sh Kdump: loaded Not tainted 5.18.9 #45 [ 21.201979] Hardware name: riscv-virtio,qemu (DT) [ 21.202160] epc : 00ffffffa5537400 ra : ffffffff80088640 sp : ff20000010333b90 [ 21.202435] gp : ffffffff810dde38 tp : ff6000000226c200 t0 : ffffffff8032be7c [ 21.202707] t1 : 0720072007200720 t2 : 30203a7375746174 s0 : ff20000010333cf0 [ 21.202973] s1 : 0000000000000000 a0 : ff20000010333b98 a1 : 0000000000000001 [ 21.203243] a2 : 0000000000000010 a3 : 0000000000000000 a4 : 28c8f0aeffea4e00 [ 21.203519] a5 : 28c8f0aeffea4e00 a6 : 0000000000000009 a7 : ffffffff8035c9b8 [ 21.203794] s2 : ffffffff810df0a8 s3 : ffffffff810df718 s4 : ff20000010333b98 [ 21.204062] s5 : 0000000000000000 s6 : 0000000000000007 s7 : ffffffff80c4a468 [ 21.204331] s8 : 00ffffffef451410 s9 : 0000000000000007 s10: 00aaaaaac0510700 [ 21.204606] s11: 0000000000000001 t3 : ff60000001218f00 t4 : ff60000001218f00 [ 21.204876] t5 : ff60000001218000 t6 : ff200000103338b8 [ 21.205079] status: 0000000200000020 badaddr: 0000000000000000 cause: 0000000000000008 With the incorrect PC, the backtrace showed by crash tool as below, the first stack frame is abnormal, crash> bt PID: 113 TASK: ff60000002269600 CPU: 0 COMMAND: "sh" #0 [ff2000001039bb90] __efistub_.Ldebug_info0 at 00ffffffa5537400 <-- Abnormal #1 [ff2000001039bcf0] panic at ffffffff806578ba #2 [ff2000001039bd50] sysrq_reset_seq_param_set at ffffffff8038c030 #3 [ff2000001039bda0] __handle_sysrq at ffffffff8038c5f8 #4 [ff2000001039be00] write_sysrq_trigger at ffffffff8038cad8 #5 [ff2000001039be20] proc_reg_write at ffffffff801b7edc #6 [ff2000001039be40] vfs_write at ffffffff80152ba6 #7 [ff2000001039be80] ksys_write at ffffffff80152ece #8 [ff2000001039bed0] sys_write at ffffffff80152f46 With the patch, we can get current kernel mode PC, the output as below, [ 17.607658] CPU: 0 PID: 113 Comm: sh Kdump: loaded Not tainted 5.18.9 #42 [ 17.607937] Hardware name: riscv-virtio,qemu (DT) [ 17.608150] epc : ffffffff800078f8 ra : ffffffff8008862c sp : ff20000010333b90 [ 17.608441] gp : ffffffff810dde38 tp : ff6000000226c200 t0 : ffffffff8032be68 [ 17.608741] t1 : 0720072007200720 t2 : 666666666666663c s0 : ff20000010333cf0 [ 17.609025] s1 : 0000000000000000 a0 : ff20000010333b98 a1 : 0000000000000001 [ 17.609320] a2 : 0000000000000010 a3 : 0000000000000000 a4 : 0000000000000000 [ 17.609601] a5 : ff60000001c78000 a6 : 000000000000003c a7 : ffffffff8035c9a4 [ 17.609894] s2 : ffffffff810df0a8 s3 : ffffffff810df718 s4 : ff20000010333b98 [ 17.610186] s5 : 0000000000000000 s6 : 0000000000000007 s7 : ffffffff80c4a468 [ 17.610469] s8 : 00ffffffca281410 s9 : 0000000000000007 s10: 00aaaaaab5bb6700 [ 17.610755] s11: 0000000000000001 t3 : ff60000001218f00 t4 : ff60000001218f00 [ 17.611041] t5 : ff60000001218000 t6 : ff20000010333988 [ 17.611255] status: 0000000200000020 badaddr: 0000000000000000 cause: 0000000000000008 With the correct PC, the backtrace showed by crash tool as below, crash> bt PID: 113 TASK: ff6000000226c200 CPU: 0 COMMAND: "sh" #0 [ff20000010333b90] riscv_crash_save_regs at ffffffff800078f8 <--- Normal #1 [ff20000010333cf0] panic at ffffffff806578c6 #2 [ff20000010333d50] sysrq_reset_seq_param_set at ffffffff8038c03c #3 [ff20000010333da0] __handle_sysrq at ffffffff8038c604 #4 [ff20000010333e00] write_sysrq_trigger at ffffffff8038cae4 #5 [ff20000010333e20] proc_reg_write at ffffffff801b7ee8 #6 [ff20000010333e40] vfs_write at ffffffff80152bb2 #7 [ff20000010333e80] ksys_write at ffffffff80152eda #8 [ff20000010333ed0] sys_write at ffffffff80152f52 Fixes: e53d281 ("RISC-V: Add kdump support") Co-developed-by: Guo Ren <[email protected]> Signed-off-by: Xianting Tian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]>

Patch series "mm: COW fixes part 1: fix the COW security issue for THP and swap", v3. This series attempts to optimize and streamline the COW logic for ordinary anon pages and THP anon pages, fixing two remaining instances of CVE-2020-29374 in do_swap_page() and do_huge_pmd_wp_page(): information can leak from a parent process to a child process via anonymous pages shared during fork(). This issue, including other related COW issues, has been summarized in [2]: " 1. Observing Memory Modifications of Private Pages From A Child Process Long story short: process-private memory might not be as private as you think once you fork(): successive modifications of private memory regions in the parent process can still be observed by the child process, for example, by smart use of vmsplice()+munmap(). The core problem is that pinning pages readable in a child process, such as done via the vmsplice system call, can result in a child process observing memory modifications done in the parent process the child is not supposed to observe. [1] contains an excellent summary and [2] contains further details. This issue was assigned CVE-2020-29374 [9]. For this to trigger, it's required to use a fork() without subsequent exec(), for example, as used under Android zygote. Without further details about an application that forks less-privileged child processes, one cannot really say what's actually affected and what's not -- see the details section the end of this mail for a short sshd/openssh analysis. While commit 1783985 ("gup: document and work around "COW can break either way" issue") fixed this issue and resulted in other problems (e.g., ptrace on pmem), commit 09854ba ("mm: do_wp_page() simplification") re-introduced part of the problem unfortunately. The original reproducer can be modified quite easily to use THP [3] and make the issue appear again on upstream kernels. I modified it to use hugetlb [4] and it triggers as well. The problem is certainly less severe with hugetlb than with THP; it merely highlights that we still have plenty of open holes we should be closing/fixing. Regarding vmsplice(), the only known workaround is to disallow the vmsplice() system call ... or disable THP and hugetlb. But who knows what else is affected (RDMA? O_DIRECT?) to achieve the same goal -- in the end, it's a more generic issue. " This security issue was first reported by Jann Horn on 27 May 2020 and it currently affects anonymous pages during swapin, anonymous THP and hugetlb. This series tackles anonymous pages during swapin and anonymous THP: * do_swap_page() for handling COW on PTEs during swapin directly * do_huge_pmd_wp_page() for handling COW on PMD-mapped THP during write faults With this series, we'll apply the same COW logic we have in do_wp_page() to all swappable anon pages: don't reuse (map writable) the page in case there are additional references (page_count() != 1). All users of reuse_swap_page() are remove, and consequently reuse_swap_page() is removed. In general, we're struggling with the following COW-related issues: (1) "missed COW": we miss to copy on write and reuse the page (map it writable) although we must copy because there are pending references from another process to this page. The result is a security issue. (2) "wrong COW": we copy on write although we wouldn't have to and shouldn't: if there are valid GUP references, they will become out of sync with the pages mapped into the page table. We fail to detect that such a page can be reused safely, especially if never more than a single process mapped the page. The result is an intra process memory corruption. (3) "unnecessary COW": we copy on write although we wouldn't have to: performance degradation and temporary increases swap+memory consumption can be the result. While this series fixes (1) for swappable anon pages, it tries to reduce reported cases of (3) first as good and easy as possible to limit the impact when streamlining. The individual patches try to describe in which cases we will run into (3). This series certainly makes (2) worse for THP, because a THP will now get PTE-mapped on write faults if there are additional references, even if there was only ever a single process involved: once PTE-mapped, we'll copy each and every subpage and won't reuse any subpage as long as the underlying compound page wasn't split. I'm working on an approach to fix (2) and improve (3): PageAnonExclusive to mark anon pages that are exclusive to a single process, allow GUP pins only on such exclusive pages, and allow turning exclusive pages shared (clearing PageAnonExclusive) only if there are no GUP pins. Anon pages with PageAnonExclusive set never have to be copied during write faults, but eventually during fork() if they cannot be turned shared. The improved reuse logic in this series will essentially also be the logic to reset PageAnonExclusive. This work will certainly take a while, but I'm planning on sharing details before having code fully ready. #1-AsahiLinux#5 can be applied independently of the rest. AsahiLinux#6-AsahiLinux#9 are mostly only cleanups related to reuse_swap_page(). Notes: * For now, I'll leave hugetlb code untouched: "unnecessary COW" might easily break existing setups because hugetlb pages are a scarce resource and we could just end up having to crash the application when we run out of hugetlb pages. We have to be very careful and the security aspect with hugetlb is most certainly less relevant than for unprivileged anon pages. * Instead of lru_add_drain() we might actually just drain the lru_add list or even just remove the single page of interest from the lru_add list. This would require a new helper function, and could be added if the conditional lru_add_drain() turn out to be a problem. * I extended the test case already included in [1] to also test for the newly found do_swap_page() case. I'll send that out separately once/if this part was merged. [1] https://lkml.kernel.org/r/[email protected] [2] https://lore.kernel.org/r/[email protected] This patch (of 9): Liang Zhang reported [1] that the current COW logic in do_wp_page() is sub-optimal when it comes to swap+read fault+write fault of anonymous pages that have a single user, visible via a performance degradation in the redis benchmark. Something similar was previously reported [2] by Nadav with a simple reproducer. After we put an anon page into the swapcache and unmapped it from a single process, that process might read that page again and refault it read-only. If that process then writes to that page, the process is actually the exclusive user of the page, however, the COW logic in do_co_page() won't be able to reuse it due to the additional reference from the swapcache. Let's optimize for pages that have been added to the swapcache but only have an exclusive user. Try removing the swapcache reference if there is hope that we're the exclusive user. We will fail removing the swapcache reference in two scenarios: (1) There are additional swap entries referencing the page: copying instead of reusing is the right thing to do. (2) The page is under writeback: theoretically we might be able to reuse in some cases, however, we cannot remove the additional reference and will have to copy. Note that we'll only try removing the page from the swapcache when it's highly likely that we'll be the exclusive owner after removing the page from the swapache. As we're about to map that page writable and redirty it, that should not affect reclaim but is rather the right thing to do. Further, we might have additional references from the LRU pagevecs, which will force us to copy instead of being able to reuse. We'll try handling such references for some scenarios next. Concurrent writeback cannot be handled easily and we'll always have to copy. While at it, remove the superfluous page_mapcount() check: it's implicitly covered by the page_count() for ordinary anon pages. [1] https://lkml.kernel.org/r/[email protected] [2] https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: David Hildenbrand <[email protected]> Reported-by: Liang Zhang <[email protected]> Reported-by: Nadav Amit <[email protected]> Reviewed-by: Matthew Wilcox (Oracle) <[email protected]> Acked-by: Vlastimil Babka <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: David Rientjes <[email protected]> Cc: Shakeel Butt <[email protected]> Cc: John Hubbard <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: Mike Kravetz <[email protected]> Cc: Mike Rapoport <[email protected]> Cc: Yang Shi <[email protected]> Cc: Kirill A. Shutemov <[email protected]> Cc: Jann Horn <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Rik van Riel <[email protected]> Cc: Roman Gushchin <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: Peter Xu <[email protected]> Cc: Don Dutile <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Oleg Nesterov <[email protected]> Cc: Jan Kara <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]>

@lip

KASAN reported a UAF bug when I was running xfs/235: BUG: KASAN: use-after-free in xlog_recover_process_intents+0xa77/0xae0 [xfs] Read of size 8 at addr ffff88804391b360 by task mount/5680 CPU: 2 PID: 5680 Comm: mount Not tainted 6.0.0-xfsx #6.0.0 77e7b52a4943a975441e5ac90a5ad7748b7867f6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0x2cc/0x682 kasan_report+0xa3/0x120 xlog_recover_process_intents+0xa77/0xae0 [xfs fb841c7180aad3f8359438576e27867f5795667e] xlog_recover_finish+0x7d/0x970 [xfs fb841c7180aad3f8359438576e27867f5795667e] xfs_log_mount_finish+0x2d7/0x5d0 [xfs fb841c7180aad3f8359438576e27867f5795667e] xfs_mountfs+0x11d4/0x1d10 [xfs fb841c7180aad3f8359438576e27867f5795667e] xfs_fs_fill_super+0x13d5/0x1a80 [xfs fb841c7180aad3f8359438576e27867f5795667e] get_tree_bdev+0x3da/0x6e0 vfs_get_tree+0x7d/0x240 path_mount+0xdd3/0x17d0 __x64_sys_mount+0x1fa/0x270 do_syscall_64+0x2b/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7ff5bc069eae Code: 48 8b 0d 85 1f 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 52 1f 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe433fd448 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff5bc069eae RDX: 00005575d7213290 RSI: 00005575d72132d0 RDI: 00005575d72132b0 RBP: 00005575d7212fd0 R08: 00005575d7213230 R09: 00005575d7213fe0 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00005575d7213290 R14: 00005575d72132b0 R15: 00005575d7212fd0 </TASK> Allocated by task 5680: kasan_save_stack+0x1e/0x40 __kasan_slab_alloc+0x66/0x80 kmem_cache_alloc+0x152/0x320 xfs_rui_init+0x17a/0x1b0 [xfs] xlog_recover_rui_commit_pass2+0xb9/0x2e0 [xfs] xlog_recover_items_pass2+0xe9/0x220 [xfs] xlog_recover_commit_trans+0x673/0x900 [xfs] xlog_recovery_process_trans+0xbe/0x130 [xfs] xlog_recover_process_data+0x103/0x2a0 [xfs] xlog_do_recovery_pass+0x548/0xc60 [xfs] xlog_do_log_recovery+0x62/0xc0 [xfs] xlog_do_recover+0x73/0x480 [xfs] xlog_recover+0x229/0x460 [xfs] xfs_log_mount+0x284/0x640 [xfs] xfs_mountfs+0xf8b/0x1d10 [xfs] xfs_fs_fill_super+0x13d5/0x1a80 [xfs] get_tree_bdev+0x3da/0x6e0 vfs_get_tree+0x7d/0x240 path_mount+0xdd3/0x17d0 __x64_sys_mount+0x1fa/0x270 do_syscall_64+0x2b/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 5680: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 ____kasan_slab_free+0x144/0x1b0 slab_free_freelist_hook+0xab/0x180 kmem_cache_free+0x1f1/0x410 xfs_rud_item_release+0x33/0x80 [xfs] xfs_trans_free_items+0xc3/0x220 [xfs] xfs_trans_cancel+0x1fa/0x590 [xfs] xfs_rui_item_recover+0x913/0xd60 [xfs] xlog_recover_process_intents+0x24e/0xae0 [xfs] xlog_recover_finish+0x7d/0x970 [xfs] xfs_log_mount_finish+0x2d7/0x5d0 [xfs] xfs_mountfs+0x11d4/0x1d10 [xfs] xfs_fs_fill_super+0x13d5/0x1a80 [xfs] get_tree_bdev+0x3da/0x6e0 vfs_get_tree+0x7d/0x240 path_mount+0xdd3/0x17d0 __x64_sys_mount+0x1fa/0x270 do_syscall_64+0x2b/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The buggy address belongs to the object at ffff88804391b300 which belongs to the cache xfs_rui_item of size 688 The buggy address is located 96 bytes inside of 688-byte region [ffff88804391b300, ffff88804391b5b0) The buggy address belongs to the physical page: page:ffffea00010e4600 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888043919320 pfn:0x43918 head:ffffea00010e4600 order:2 compound_mapcount:0 compound_pincount:0 flags: 0x4fff80000010200(slab|head|node=1|zone=1|lastcpupid=0xfff) raw: 04fff80000010200 0000000000000000 dead000000000122 ffff88807f0eadc0 raw: ffff888043919320 0000000080140010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88804391b200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88804391b280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88804391b300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88804391b380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88804391b400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== The test fuzzes an rmap btree block and starts writer threads to induce a filesystem shutdown on the corrupt block. When the filesystem is remounted, recovery will try to replay the committed rmap intent item, but the corruption problem causes the recovery transaction to fail. Cancelling the transaction frees the RUD, which frees the RUI that we recovered. When we return to xlog_recover_process_intents, @lip is now a dangling pointer, and we cannot use it to find the iop_recover method for the tracepoint. Hence we must store the item ops before calling ->iop_recover if we want to give it to the tracepoint so that the trace data will tell us exactly which intent item failed. Signed-off-by: Darrick J. Wong <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]>

test_bpf tail call tests end up as: test_bpf: #0 Tail call leaf jited:1 85 PASS test_bpf: #1 Tail call 2 jited:1 111 PASS test_bpf: #2 Tail call 3 jited:1 145 PASS test_bpf: #3 Tail call 4 jited:1 170 PASS test_bpf: #4 Tail call load/store leaf jited:1 190 PASS test_bpf: #5 Tail call load/store jited:1 BUG: Unable to handle kernel data access on write at 0xf1b4e000 Faulting instruction address: 0xbe86b710 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K MMU=Hash PowerMac Modules linked in: test_bpf(+) CPU: 0 PID: 97 Comm: insmod Not tainted 6.1.0-rc4+ #195 Hardware name: PowerMac3,1 750CL 0x87210 PowerMac NIP: be86b710 LR: be857e88 CTR: be86b704 REGS: f1b4df20 TRAP: 0300 Not tainted (6.1.0-rc4+) MSR: 00009032 <EE,ME,IR,DR,RI> CR: 28008242 XER: 00000000 DAR: f1b4e000 DSISR: 42000000 GPR00: 00000001 f1b4dfe c11d2280 00000000 00000000 00000000 00000002 00000000 GPR08: f1b4e000 be86b704 f1b4e000 00000000 00000000 100d816a f2440000 fe73baa8 GPR16: f2458000 00000000 c1941ae4 f1fe2248 00000045 c0de0000 f2458030 00000000 GPR24: 000003e8 0000000f f2458000 f1b4dc90 3e584b46 00000000 f24466a0 c1941a00 NIP [be86b710] 0xbe86b710 LR [be857e88] __run_one+0xec/0x264 [test_bpf] Call Trace: [f1b4dfe] [00000002] 0x2 (unreliable) Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 0000000000000000 ]--- This is a tentative to write above the stack. The problem is encoutered with tests added by commit 38608ee ("bpf, tests: Add load store test case for tail call") This happens because tail call is done to a BPF prog with a different stack_depth. At the time being, the stack is kept as is when the caller tail calls its callee. But at exit, the callee restores the stack based on its own properties. Therefore here, at each run, r1 is erroneously increased by 32 - 16 = 16 bytes. This was done that way in order to pass the tail call count from caller to callee through the stack. As powerpc32 doesn't have a red zone in the stack, it was necessary the maintain the stack as is for the tail call. But it was not anticipated that the BPF frame size could be different. Let's take a new approach. Use register r4 to carry the tail call count during the tail call, and save it into the stack at function entry if required. This means the input parameter must be in r3, which is more correct as it is a 32 bits parameter, then tail call better match with normal BPF function entry, the down side being that we move that input parameter back and forth between r3 and r4. That can be optimised later. Doing that also has the advantage of maximising the common parts between tail calls and a normal function exit. With the fix, tail call tests are now successfull: test_bpf: #0 Tail call leaf jited:1 53 PASS test_bpf: #1 Tail call 2 jited:1 115 PASS test_bpf: #2 Tail call 3 jited:1 154 PASS test_bpf: #3 Tail call 4 jited:1 165 PASS test_bpf: #4 Tail call load/store leaf jited:1 101 PASS test_bpf: #5 Tail call load/store jited:1 141 PASS test_bpf: #6 Tail call error path, max count reached jited:1 994 PASS test_bpf: #7 Tail call count preserved across function calls jited:1 140975 PASS test_bpf: #8 Tail call error path, NULL target jited:1 110 PASS test_bpf: #9 Tail call error path, index out of range jited:1 69 PASS test_bpf: test_tail_calls: Summary: 10 PASSED, 0 FAILED, [10/10 JIT'ed] Suggested-by: Naveen N. Rao <[email protected]> Fixes: 51c66ad ("powerpc/bpf: Implement extended BPF on PPC32") Cc: [email protected] Signed-off-by: Christophe Leroy <[email protected]> Tested-by: Naveen N. Rao <[email protected] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/757acccb7fbfc78efa42dcf3c974b46678198905.1669278887.git.christophe.leroy@csgroup.eu

Ido Schimmel says: ==================== bridge: mcast: Extensions for EVPN tl;dr ===== This patchset creates feature parity between user space and the kernel and allows the former to install and replace MDB port group entries with a source list and associated filter mode. This is required for EVPN use cases where multicast state is not derived from snooped IGMP/MLD packets, but instead derived from EVPN routes exchanged by the control plane in user space. Background ========== IGMPv3 [1] and MLDv2 [2] differ from earlier versions of the protocols in that they add support for source-specific multicast. That is, hosts can advertise interest in listening to a particular multicast address only from specific source addresses or from all sources except for specific source addresses. In kernel 5.10 [3][4], the bridge driver gained the ability to snoop IGMPv3/MLDv2 packets and install corresponding MDB port group entries. For example, a snooped IGMPv3 Membership Report that contains a single MODE_IS_EXCLUDE record for group 239.10.10.10 with sources 192.0.2.1, 192.0.2.2, 192.0.2.20 and 192.0.2.21 would trigger the creation of these entries: # bridge -d mdb show dev br0 port veth1 grp 239.10.10.10 src 192.0.2.21 temp filter_mode include proto kernel blocked dev br0 port veth1 grp 239.10.10.10 src 192.0.2.20 temp filter_mode include proto kernel blocked dev br0 port veth1 grp 239.10.10.10 src 192.0.2.2 temp filter_mode include proto kernel blocked dev br0 port veth1 grp 239.10.10.10 src 192.0.2.1 temp filter_mode include proto kernel blocked dev br0 port veth1 grp 239.10.10.10 temp filter_mode exclude source_list 192.0.2.21/0.00,192.0.2.20/0.00,192.0.2.2/0.00,192.0.2.1/0.00 proto kernel While the kernel can install and replace entries with a filter mode and source list, user space cannot. It can only add EXCLUDE entries with an empty source list, which is sufficient for IGMPv2/MLDv1, but not for IGMPv3/MLDv2. Use cases where the multicast state is not derived from snooped packets, but instead derived from routes exchanged by the user space control plane require feature parity between user space and the kernel in terms of MDB configuration. Such a use case is detailed in the next section. Motivation ========== RFC 7432 [5] defines a "MAC/IP Advertisement route" (type 2) [6] that allows NVE switches in the EVPN network to advertise and learn reachability information for unicast MAC addresses. Traffic destined to a unicast MAC address can therefore be selectively forwarded to a single NVE switch behind which the MAC is located. The same is not true for IP multicast traffic. Such traffic is simply flooded as BUM to all NVE switches in the broadcast domain (BD), regardless if a switch has interested receivers for the multicast stream or not. This is especially problematic for overlay networks that make heavy use of multicast. The issue is addressed by RFC 9251 [7] that defines a "Selective Multicast Ethernet Tag Route" (type 6) [8] which allows NVE switches in the EVPN network to advertise multicast streams that they are interested in. This is done by having each switch suppress IGMP/MLD packets from being transmitted to the NVE network and instead communicate the information over BGP to other switches. As far as the bridge driver is concerned, the above means that the multicast state (i.e., {multicast address, group timer, filter-mode, (source records)}) for the VXLAN bridge port is not populated by the kernel from snooped IGMP/MLD packets (they are suppressed), but instead by user space. Specifically, by the routing daemon that is exchanging EVPN routes with other NVE switches. Changes are obviously also required in the VXLAN driver, but they are the subject of future patchsets. See the "Future work" section. Implementation ============== The user interface is extended to allow user space to specify the filter mode of the MDB port group entry and its source list. Replace support is also added so that user space would not need to remove an entry and re-add it only to edit its source list or filter mode, as that would result in packet loss. Example usage: # bridge mdb replace dev br0 port dummy10 grp 239.1.1.1 permanent \ source_list 192.0.2.1,192.0.2.3 filter_mode exclude proto zebra # bridge -d -s mdb show dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.3 permanent filter_mode include proto zebra blocked 0.00 dev br0 port dummy10 grp 239.1.1.1 src 192.0.2.1 permanent filter_mode include proto zebra blocked 0.00 dev br0 port dummy10 grp 239.1.1.1 permanent filter_mode exclude source_list 192.0.2.3/0.00,192.0.2.1/0.00 proto zebra 0.00 The netlink interface is extended with a few new attributes in the RTM_NEWMDB request message: [ struct nlmsghdr ] [ struct br_port_msg ] [ MDBA_SET_ENTRY ] struct br_mdb_entry [ MDBA_SET_ENTRY_ATTRS ] [ MDBE_ATTR_SOURCE ] struct in_addr / struct in6_addr [ MDBE_ATTR_SRC_LIST ] // new [ MDBE_SRC_LIST_ENTRY ] [ MDBE_SRCATTR_ADDRESS ] struct in_addr / struct in6_addr [ ...] [ MDBE_ATTR_GROUP_MODE ] // new u8 [ MDBE_ATTR_RTPORT ] // new u8 No changes are required in RTM_NEWMDB responses and notifications, as all the information can already be dumped by the kernel today. Testing ======= Tested with existing bridge multicast selftests: bridge_igmp.sh, bridge_mdb_port_down.sh, bridge_mdb.sh, bridge_mld.sh, bridge_vlan_mcast.sh. In addition, added many new test cases for existing as well as for new MDB functionality. Patchset overview ================= Patches #1-#8 are non-functional preparations for the core changes in later patches. Patches #9-#10 allow user space to install (*, G) entries with a source list and associated filter mode. Specifically, patch #9 adds the necessary kernel plumbing and patch #10 exposes the new functionality to user space via a few new attributes. Patch #11 allows user space to specify the routing protocol of new MDB port group entries so that a routing daemon could differentiate between entries installed by it and those installed by an administrator. Patch #12 allows user space to replace MDB port group entries. This is useful, for example, when user space wants to add a new source to a source list. Instead of deleting a (*, G) entry and re-adding it with an extended source list (which would result in packet loss), user space can simply replace the current entry. Patches #13-#14 add tests for existing MDB functionality as well as for all new functionality added in this patchset. Future work =========== The VXLAN driver will need to be extended with an MDB so that it could selectively forward IP multicast traffic to NVE switches with interested receivers instead of simply flooding it to all switches as BUM. The idea is to reuse the existing MDB interface for the VXLAN driver in a similar way to how the FDB interface is shared between the bridge and VXLAN drivers. From command line perspective, configuration will look as follows: # bridge mdb add dev br0 port vxlan0 grp 239.1.1.1 permanent \ filter_mode exclude source_list 198.50.100.1,198.50.100.2 # bridge mdb add dev vxlan0 port vxlan0 grp 239.1.1.1 permanent \ filter_mode include source_list 198.50.100.3,198.50.100.4 \ dst 192.0.2.1 dst_port 4789 src_vni 2 # bridge mdb add dev vxlan0 port vxlan0 grp 239.1.1.1 permanent \ filter_mode exclude source_list 198.50.100.1,198.50.100.2 \ dst 192.0.2.2 dst_port 4789 src_vni 2 Where the first command is enabled by this set, but the next two will be the subject of future work. From netlink perspective, the existing PF_BRIDGE/RTM_*MDB messages will be extended to the VXLAN driver. This means that a few new attributes will be added (e.g., 'MDBE_ATTR_SRC_VNI') and that the handlers for these messages will need to move to net/core/rtnetlink.c. The rtnetlink code will call into the appropriate driver based on the ifindex specified in the ancillary header. iproute2 patches can be found here [9]. Changelog ========= Since v1 [10]: * Patch #12: Remove extack from br_mdb_replace_group_sg(). * Patch #12: Change 'nlflags' to u16 and move it after 'filter_mode' to pack the structure. Since RFC [11]: * Patch #6: New patch. * Patch #9: Use an array instead of a list to store source entries. * Patch #10: Use an array instead of list to store source entries. * Patch #10: Drop br_mdb_config_attrs_fini(). * Patch #11: Reject protocol for host entries. * Patch #13: New patch. * Patch #14: New patch. [1] https://datatracker.ietf.org/doc/html/rfc3376 [2] https://www.rfc-editor.org/rfc/rfc3810 [3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6af52ae2ed14a6bc756d5606b29097dfd76740b8 [4] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=68d4fd30c83b1b208e08c954cd45e6474b148c87 [5] https://datatracker.ietf.org/doc/html/rfc7432 [6] https://datatracker.ietf.org/doc/html/rfc7432#section-7.2 [7] https://datatracker.ietf.org/doc/html/rfc9251 [8] https://datatracker.ietf.org/doc/html/rfc9251#section-9.1 [9] https://github.com/idosch/iproute2/commits/submit/mdb_v1 [10] https://lore.kernel.org/netdev/[email protected]/ [11] https://lore.kernel.org/netdev/[email protected]/ ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

With commit c4cb231 ("iommu/amd: Add support for enable/disable IOPF") we are hitting below issue. This happens because in IOPF enablement path it holds spin lock with irq disable and then tries to take mutex lock. dmesg: ----- [ 0.938739] ============================= [ 0.938740] [ BUG: Invalid wait context ] [ 0.938742] 6.10.0-rc1+ #1 Not tainted [ 0.938745] ----------------------------- [ 0.938746] swapper/0/1 is trying to lock: [ 0.938748] ffffffff8c9f01d8 (&port_lock_key){....}-{3:3}, at: serial8250_console_write+0x78/0x4a0 [ 0.938767] other info that might help us debug this: [ 0.938768] context-{5:5} [ 0.938769] 7 locks held by swapper/0/1: [ 0.938772] #0: ffff888101a91310 (&group->mutex){+.+.}-{4:4}, at: bus_iommu_probe+0x70/0x160 [ 0.938790] #1: ffff888101d1f1b8 (&domain->lock){....}-{3:3}, at: amd_iommu_attach_device+0xa5/0x700 [ 0.938799] #2: ffff888101cc3d18 (&dev_data->lock){....}-{3:3}, at: amd_iommu_attach_device+0xc5/0x700 [ 0.938806] #3: ffff888100052830 (&iommu->lock){....}-{2:2}, at: amd_iommu_iopf_add_device+0x3f/0xa0 [ 0.938813] #4: ffffffff8945a340 (console_lock){+.+.}-{0:0}, at: _printk+0x48/0x50 [ 0.938822] #5: ffffffff8945a390 (console_srcu){....}-{0:0}, at: console_flush_all+0x58/0x4e0 [ 0.938867] #6: ffffffff82459f80 (console_owner){....}-{0:0}, at: console_flush_all+0x1f0/0x4e0 [ 0.938872] stack backtrace: [ 0.938874] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.10.0-rc1+ #1 [ 0.938877] Hardware name: HP HP EliteBook 745 G3/807E, BIOS N73 Ver. 01.39 04/16/2019 Fix above issue by re-arranging code in attach device path: - move device PASID/IOPF enablement outside lock in AMD IOMMU driver. This is safe as core layer holds group->mutex lock before calling iommu_ops->attach_dev. Reported-by: Borislav Petkov <[email protected]> Reported-by: Mikhail Gavrilov <[email protected]> Reported-by: Chris Bainbridge <[email protected]> Fixes: c4cb231 ("iommu/amd: Add support for enable/disable IOPF") Tested-by: Borislav Petkov <[email protected]> Tested-by: Chris Bainbridge <[email protected]> Tested-by: Mikhail Gavrilov <[email protected]> Signed-off-by: Vasant Hegde <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>

…PLES event" This reverts commit 7d1405c. This causes segfaults in some cases, as reported by Milian: ``` sudo /usr/bin/perf record -z --call-graph dwarf -e cycles -e raw_syscalls:sys_enter ls ... [ perf record: Woken up 3 times to write data ] malloc(): invalid next size (unsorted) Aborted ``` Backtrace with GDB + debuginfod: ``` malloc(): invalid next size (unsorted) Thread 1 "perf" received signal SIGABRT, Aborted. __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 Downloading source file /usr/src/debug/glibc/glibc/nptl/pthread_kill.c 44 return INTERNAL_SYSCALL_ERROR_P (ret) ? INTERNAL_SYSCALL_ERRNO (ret) : 0; (gdb) bt #0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 #1 0x00007ffff6ea8eb3 in __pthread_kill_internal (threadid=<optimized out>, signo=6) at pthread_kill.c:78 #2 0x00007ffff6e50a30 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/ raise.c:26 #3 0x00007ffff6e384c3 in __GI_abort () at abort.c:79 #4 0x00007ffff6e39354 in __libc_message_impl (fmt=fmt@entry=0x7ffff6fc22ea "%s\n") at ../sysdeps/posix/libc_fatal.c:132 #5 0x00007ffff6eb3085 in malloc_printerr (str=str@entry=0x7ffff6fc5850 "malloc(): invalid next size (unsorted)") at malloc.c:5772 #6 0x00007ffff6eb657c in _int_malloc (av=av@entry=0x7ffff6ff6ac0 <main_arena>, bytes=bytes@entry=368) at malloc.c:4081 #7 0x00007ffff6eb877e in __libc_calloc (n=<optimized out>, elem_size=<optimized out>) at malloc.c:3754 #8 0x000055555569bdb6 in perf_session.do_write_header () #9 0x00005555555a373a in __cmd_record.constprop.0 () #10 0x00005555555a6846 in cmd_record () #11 0x000055555564db7f in run_builtin () #12 0x000055555558ed77 in main () ``` Valgrind memcheck: ``` ==45136== Invalid write of size 8 ==45136== at 0x2B38A5: perf_event__synthesize_id_sample (in /usr/bin/perf) ==45136== by 0x157069: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ==45136== Syscall param write(buf) points to unaddressable byte(s) ==45136== at 0x575953D: __libc_write (write.c:26) ==45136== by 0x575953D: write (write.c:24) ==45136== by 0x35761F: ion (in /usr/bin/perf) ==45136== by 0x357778: writen (in /usr/bin/perf) ==45136== by 0x1548F7: record__write (in /usr/bin/perf) ==45136== by 0x15708A: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ----- Closes: https://lore.kernel.org/linux-perf-users/23879991.0LEYPuXRzz@milian-workstation/ Reported-by: Milian Wolff <[email protected]> Tested-by: Milian Wolff <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: [email protected] # 6.8+ Link: https://lore.kernel.org/lkml/Zl9ksOlHJHnKM70p@x1 Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: [email protected] # 6.1+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Omar Sandoval <[email protected]> Signed-off-by: David Sterba <[email protected]>

…play During inode logging (and log replay too), we are holding a transaction handle and we often need to call btrfs_iget(), which will read an inode from its subvolume btree if it's not loaded in memory and that results in allocating an inode with GFP_KERNEL semantics at the btrfs_alloc_inode() callback - and this may recurse into the filesystem in case we are under memory pressure and attempt to commit the current transaction, resulting in a deadlock since the logging (or log replay) task is holding a transaction handle open. Syzbot reported this with the following stack traces: WARNING: possible circular locking dependency detected 6.10.0-rc2-syzkaller-00361-g061d1af7b030 #0 Not tainted ------------------------------------------------------ syz-executor.1/9919 is trying to acquire lock: ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: might_alloc include/linux/sched/mm.h:334 [inline] ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: slab_pre_alloc_hook mm/slub.c:3891 [inline] ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: slab_alloc_node mm/slub.c:3981 [inline] ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020 but task is already holding lock: ffff88804b569358 (&ei->log_mutex){+.+.}-{3:3}, at: btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&ei->log_mutex){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x175/0x9c0 kernel/locking/mutex.c:752 btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481 btrfs_log_inode_parent+0x8cb/0x2a90 fs/btrfs/tree-log.c:7079 btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180 btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959 vfs_fsync_range+0x141/0x230 fs/sync.c:188 generic_write_sync include/linux/fs.h:2794 [inline] btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705 new_sync_write fs/read_write.c:497 [inline] vfs_write+0x6b6/0x1140 fs/read_write.c:590 ksys_write+0x12f/0x260 fs/read_write.c:643 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e -> #2 (btrfs_trans_num_extwriters){++++}-{0:0}: join_transaction+0x164/0xf40 fs/btrfs/transaction.c:315 start_transaction+0x427/0x1a70 fs/btrfs/transaction.c:700 btrfs_commit_super+0xa1/0x110 fs/btrfs/disk-io.c:4170 close_ctree+0xcb0/0xf90 fs/btrfs/disk-io.c:4324 generic_shutdown_super+0x159/0x3d0 fs/super.c:642 kill_anon_super+0x3a/0x60 fs/super.c:1226 btrfs_kill_super+0x3b/0x50 fs/btrfs/super.c:2096 deactivate_locked_super+0xbe/0x1a0 fs/super.c:473 deactivate_super+0xde/0x100 fs/super.c:506 cleanup_mnt+0x222/0x450 fs/namespace.c:1267 task_work_run+0x14e/0x250 kernel/task_work.c:180 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x278/0x2a0 kernel/entry/common.c:218 __do_fast_syscall_32+0x80/0x120 arch/x86/entry/common.c:389 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e -> #1 (btrfs_trans_num_writers){++++}-{0:0}: __lock_release kernel/locking/lockdep.c:5468 [inline] lock_release+0x33e/0x6c0 kernel/locking/lockdep.c:5774 percpu_up_read include/linux/percpu-rwsem.h:99 [inline] __sb_end_write include/linux/fs.h:1650 [inline] sb_end_intwrite include/linux/fs.h:1767 [inline] __btrfs_end_transaction+0x5ca/0x920 fs/btrfs/transaction.c:1071 btrfs_commit_inode_delayed_inode+0x228/0x330 fs/btrfs/delayed-inode.c:1301 btrfs_evict_inode+0x960/0xe80 fs/btrfs/inode.c:5291 evict+0x2ed/0x6c0 fs/inode.c:667 iput_final fs/inode.c:1741 [inline] iput.part.0+0x5a8/0x7f0 fs/inode.c:1767 iput+0x5c/0x80 fs/inode.c:1757 dentry_unlink_inode+0x295/0x480 fs/dcache.c:400 __dentry_kill+0x1d0/0x600 fs/dcache.c:603 dput.part.0+0x4b1/0x9b0 fs/dcache.c:845 dput+0x1f/0x30 fs/dcache.c:835 ovl_stack_put+0x60/0x90 fs/overlayfs/util.c:132 ovl_destroy_inode+0xc6/0x190 fs/overlayfs/super.c:182 destroy_inode+0xc4/0x1b0 fs/inode.c:311 iput_final fs/inode.c:1741 [inline] iput.part.0+0x5a8/0x7f0 fs/inode.c:1767 iput+0x5c/0x80 fs/inode.c:1757 dentry_unlink_inode+0x295/0x480 fs/dcache.c:400 __dentry_kill+0x1d0/0x600 fs/dcache.c:603 shrink_kill fs/dcache.c:1048 [inline] shrink_dentry_list+0x140/0x5d0 fs/dcache.c:1075 prune_dcache_sb+0xeb/0x150 fs/dcache.c:1156 super_cache_scan+0x32a/0x550 fs/super.c:221 do_shrink_slab+0x44f/0x11c0 mm/shrinker.c:435 shrink_slab_memcg mm/shrinker.c:548 [inline] shrink_slab+0xa87/0x1310 mm/shrinker.c:626 shrink_one+0x493/0x7c0 mm/vmscan.c:4790 shrink_many mm/vmscan.c:4851 [inline] lru_gen_shrink_node+0x89f/0x1750 mm/vmscan.c:4951 shrink_node mm/vmscan.c:5910 [inline] kswapd_shrink_node mm/vmscan.c:6720 [inline] balance_pgdat+0x1105/0x1970 mm/vmscan.c:6911 kswapd+0x5ea/0xbf0 mm/vmscan.c:7180 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 -> #0 (fs_reclaim){+.+.}-{0:0}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain kernel/locking/lockdep.c:3869 [inline] __lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137 lock_acquire kernel/locking/lockdep.c:5754 [inline] lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719 __fs_reclaim_acquire mm/page_alloc.c:3801 [inline] fs_reclaim_acquire+0x102/0x160 mm/page_alloc.c:3815 might_alloc include/linux/sched/mm.h:334 [inline] slab_pre_alloc_hook mm/slub.c:3891 [inline] slab_alloc_node mm/slub.c:3981 [inline] kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020 btrfs_alloc_inode+0x118/0xb20 fs/btrfs/inode.c:8411 alloc_inode+0x5d/0x230 fs/inode.c:261 iget5_locked fs/inode.c:1235 [inline] iget5_locked+0x1c9/0x2c0 fs/inode.c:1228 btrfs_iget_locked fs/btrfs/inode.c:5590 [inline] btrfs_iget_path fs/btrfs/inode.c:5607 [inline] btrfs_iget+0xfb/0x230 fs/btrfs/inode.c:5636 add_conflicting_inode fs/btrfs/tree-log.c:5657 [inline] copy_inode_items_to_log+0x1039/0x1e30 fs/btrfs/tree-log.c:5928 btrfs_log_inode+0xa48/0x4660 fs/btrfs/tree-log.c:6592 log_new_delayed_dentries fs/btrfs/tree-log.c:6363 [inline] btrfs_log_inode+0x27dd/0x4660 fs/btrfs/tree-log.c:6718 btrfs_log_all_parents fs/btrfs/tree-log.c:6833 [inline] btrfs_log_inode_parent+0x22ba/0x2a90 fs/btrfs/tree-log.c:7141 btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180 btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959 vfs_fsync_range+0x141/0x230 fs/sync.c:188 generic_write_sync include/linux/fs.h:2794 [inline] btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705 do_iter_readv_writev+0x504/0x780 fs/read_write.c:741 vfs_writev+0x36f/0xde0 fs/read_write.c:971 do_pwritev+0x1b2/0x260 fs/read_write.c:1072 __do_compat_sys_pwritev2 fs/read_write.c:1218 [inline] __se_compat_sys_pwritev2 fs/read_write.c:1210 [inline] __ia32_compat_sys_pwritev2+0x121/0x1b0 fs/read_write.c:1210 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e other info that might help us debug this: Chain exists of: fs_reclaim --> btrfs_trans_num_extwriters --> &ei->log_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->log_mutex); lock(btrfs_trans_num_extwriters); lock(&ei->log_mutex); lock(fs_reclaim); *** DEADLOCK *** 7 locks held by syz-executor.1/9919: #0: ffff88802be20420 (sb_writers#23){.+.+}-{0:0}, at: do_pwritev+0x1b2/0x260 fs/read_write.c:1072 #1: ffff888065c0f8f0 (&sb->s_type->i_mutex_key#33){++++}-{3:3}, at: inode_lock include/linux/fs.h:791 [inline] #1: ffff888065c0f8f0 (&sb->s_type->i_mutex_key#33){++++}-{3:3}, at: btrfs_inode_lock+0xc8/0x110 fs/btrfs/inode.c:385 #2: ffff888065c0f778 (&ei->i_mmap_lock){++++}-{3:3}, at: btrfs_inode_lock+0xee/0x110 fs/btrfs/inode.c:388 #3: ffff88802be20610 (sb_internal#4){.+.+}-{0:0}, at: btrfs_sync_file+0x95b/0xe10 fs/btrfs/file.c:1952 #4: ffff8880546323f0 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0x430/0xf40 fs/btrfs/transaction.c:290 #5: ffff888054632418 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0x430/0xf40 fs/btrfs/transaction.c:290 #6: ffff88804b569358 (&ei->log_mutex){+.+.}-{3:3}, at: btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481 stack backtrace: CPU: 2 PID: 9919 Comm: syz-executor.1 Not tainted 6.10.0-rc2-syzkaller-00361-g061d1af7b030 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114 check_noncircular+0x31a/0x400 kernel/locking/lockdep.c:2187 check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain kernel/locking/lockdep.c:3869 [inline] __lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137 lock_acquire kernel/locking/lockdep.c:5754 [inline] lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719 __fs_reclaim_acquire mm/page_alloc.c:3801 [inline] fs_reclaim_acquire+0x102/0x160 mm/page_alloc.c:3815 might_alloc include/linux/sched/mm.h:334 [inline] slab_pre_alloc_hook mm/slub.c:3891 [inline] slab_alloc_node mm/slub.c:3981 [inline] kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020 btrfs_alloc_inode+0x118/0xb20 fs/btrfs/inode.c:8411 alloc_inode+0x5d/0x230 fs/inode.c:261 iget5_locked fs/inode.c:1235 [inline] iget5_locked+0x1c9/0x2c0 fs/inode.c:1228 btrfs_iget_locked fs/btrfs/inode.c:5590 [inline] btrfs_iget_path fs/btrfs/inode.c:5607 [inline] btrfs_iget+0xfb/0x230 fs/btrfs/inode.c:5636 add_conflicting_inode fs/btrfs/tree-log.c:5657 [inline] copy_inode_items_to_log+0x1039/0x1e30 fs/btrfs/tree-log.c:5928 btrfs_log_inode+0xa48/0x4660 fs/btrfs/tree-log.c:6592 log_new_delayed_dentries fs/btrfs/tree-log.c:6363 [inline] btrfs_log_inode+0x27dd/0x4660 fs/btrfs/tree-log.c:6718 btrfs_log_all_parents fs/btrfs/tree-log.c:6833 [inline] btrfs_log_inode_parent+0x22ba/0x2a90 fs/btrfs/tree-log.c:7141 btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180 btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959 vfs_fsync_range+0x141/0x230 fs/sync.c:188 generic_write_sync include/linux/fs.h:2794 [inline] btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705 do_iter_readv_writev+0x504/0x780 fs/read_write.c:741 vfs_writev+0x36f/0xde0 fs/read_write.c:971 do_pwritev+0x1b2/0x260 fs/read_write.c:1072 __do_compat_sys_pwritev2 fs/read_write.c:1218 [inline] __se_compat_sys_pwritev2 fs/read_write.c:1210 [inline] __ia32_compat_sys_pwritev2+0x121/0x1b0 fs/read_write.c:1210 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e RIP: 0023:0xf7334579 Code: b8 01 10 06 03 (...) RSP: 002b:00000000f5f265ac EFLAGS: 00000292 ORIG_RAX: 000000000000017b RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00000000200002c0 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000292 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Fix this by ensuring we are under a NOFS scope whenever we call btrfs_iget() during inode logging and log replay. Reported-by: [email protected] Link: https://lore.kernel.org/linux-btrfs/[email protected]/ Fixes: 712e36c ("btrfs: use GFP_KERNEL in btrfs_alloc_inode") Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Josef Bacik <[email protected]> Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

A kernel warning was reported when pinning folio in CMA memory when launching SEV virtual machine. The splat looks like: [ 464.325306] WARNING: CPU: 13 PID: 6734 at mm/gup.c:1313 __get_user_pages+0x423/0x520 [ 464.325464] CPU: 13 PID: 6734 Comm: qemu-kvm Kdump: loaded Not tainted 6.6.33+ #6 [ 464.325477] RIP: 0010:__get_user_pages+0x423/0x520 [ 464.325515] Call Trace: [ 464.325520] <TASK> [ 464.325523] ? __get_user_pages+0x423/0x520 [ 464.325528] ? __warn+0x81/0x130 [ 464.325536] ? __get_user_pages+0x423/0x520 [ 464.325541] ? report_bug+0x171/0x1a0 [ 464.325549] ? handle_bug+0x3c/0x70 [ 464.325554] ? exc_invalid_op+0x17/0x70 [ 464.325558] ? asm_exc_invalid_op+0x1a/0x20 [ 464.325567] ? __get_user_pages+0x423/0x520 [ 464.325575] __gup_longterm_locked+0x212/0x7a0 [ 464.325583] internal_get_user_pages_fast+0xfb/0x190 [ 464.325590] pin_user_pages_fast+0x47/0x60 [ 464.325598] sev_pin_memory+0xca/0x170 [kvm_amd] [ 464.325616] sev_mem_enc_register_region+0x81/0x130 [kvm_amd] Per the analysis done by yangge, when starting the SEV virtual machine, it will call pin_user_pages_fast(..., FOLL_LONGTERM, ...) to pin the memory. But the page is in CMA area, so fast GUP will fail then fallback to the slow path due to the longterm pinnalbe check in try_grab_folio(). The slow path will try to pin the pages then migrate them out of CMA area. But the slow path also uses try_grab_folio() to pin the page, it will also fail due to the same check then the above warning is triggered. In addition, the try_grab_folio() is supposed to be used in fast path and it elevates folio refcount by using add ref unless zero. We are guaranteed to have at least one stable reference in slow path, so the simple atomic add could be used. The performance difference should be trivial, but the misuse may be confusing and misleading. Redefined try_grab_folio() to try_grab_folio_fast(), and try_grab_page() to try_grab_folio(), and use them in the proper paths. This solves both the abuse and the kernel warning. The proper naming makes their usecase more clear and should prevent from abusing in the future. peterx said: : The user will see the pin fails, for gpu-slow it further triggers the WARN : right below that failure (as in the original report): : : folio = try_grab_folio(page, page_increm - 1, : foll_flags); : if (WARN_ON_ONCE(!folio)) { <------------------------ here : /* : * Release the 1st page ref if the : * folio is problematic, fail hard. : */ : gup_put_folio(page_folio(page), 1, : foll_flags); : ret = -EFAULT; : goto out; : } [1] https://lore.kernel.org/linux-mm/[email protected]/ [[email protected]: fix implicit declaration of function try_grab_folio_fast] Link: https://lkml.kernel.org/r/CAHbLzkowMSso-4Nufc9hcMehQsK9PNz3OSu-+eniU-2Mm-xjhA@mail.gmail.com Link: https://lkml.kernel.org/r/[email protected] Fixes: 57edfcf ("mm/gup: accelerate thp gup even for "pages != NULL"") Signed-off-by: Yang Shi <[email protected]> Reported-by: yangge <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: Peter Xu <[email protected]> Cc: <[email protected]> [6.6+] Signed-off-by: Andrew Morton <[email protected]>

commit 704d3d6 upstream. Since 45ecaea ("drm/sched: Partial revert of 'drm/sched: Keep s_fence->parent pointer'") still active jobs aren't put back in the pending list on drm_sched_start(), as they don't have a active parent fence anymore, so if the GPU is still working and the timeout is extended, all currently active jobs will be freed. To avoid prematurely freeing jobs that are still active on the GPU, don't block the scheduler until we are fully committed to actually reset the GPU. As the current job is already removed from the pending list and will not be put back when drm_sched_start() isn't called, we must make sure to put the job back on the pending list when extending the timeout. Cc: [email protected] #6.0 Signed-off-by: Lucas Stach <[email protected]> Reviewed-by: Philipp Zabel <[email protected]> Reviewed-by: Christian Gmeiner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit f0d17d6 upstream. The pen ID, 0x80842, was not the correct ID for wacom driver to treat. The ID was corrected to 0x8842. Also, 0x4200 was not the expected ID used on any Wacom device. Therefore, 0x4200 was removed. Signed-off-by: Tatsunosuke Tobita <[email protected]> Signed-off-by: Tatsunosuke Tobita <[email protected]> Fixes: bfdc750 ("HID: wacom: add three styli to wacom_intuos_get_tool_type") Cc: [email protected] #6.2 Reviewed-by: Ping Cheng <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 86a41ea ] When l2tp tunnels use a socket provided by userspace, we can hit lockdep splats like the below when data is transmitted through another (unrelated) userspace socket which then gets routed over l2tp. This issue was previously discussed here: https://lore.kernel.org/netdev/[email protected]/ The solution is to have lockdep treat socket locks of l2tp tunnel sockets separately than those of standard INET sockets. To do so, use a different lockdep subclass where lock nesting is possible. ============================================ WARNING: possible recursive locking detected 6.10.0+ #34 Not tainted -------------------------------------------- iperf3/771 is trying to acquire lock: ffff8881027601d8 (slock-AF_INET/1){+.-.}-{2:2}, at: l2tp_xmit_skb+0x243/0x9d0 but task is already holding lock: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_INET/1); lock(slock-AF_INET/1); *** DEADLOCK *** May be due to missing lock nesting notation 10 locks held by iperf3/771: #0: ffff888102650258 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x1a/0x40 #1: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 #2: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 #3: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x28b/0x9f0 #4: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0xf9/0x260 #5: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 #6: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 #7: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 #8: ffffffff822ac1e0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0xcc/0x1450 #9: ffff888101f33258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock#2){+...}-{2:2}, at: __dev_queue_xmit+0x513/0x1450 stack backtrace: CPU: 2 UID: 0 PID: 771 Comm: iperf3 Not tainted 6.10.0+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x69/0xa0 dump_stack+0xc/0x20 __lock_acquire+0x135d/0x2600 ? srso_alias_return_thunk+0x5/0xfbef5 lock_acquire+0xc4/0x2a0 ? l2tp_xmit_skb+0x243/0x9d0 ? __skb_checksum+0xa3/0x540 _raw_spin_lock_nested+0x35/0x50 ? l2tp_xmit_skb+0x243/0x9d0 l2tp_xmit_skb+0x243/0x9d0 l2tp_eth_dev_xmit+0x3c/0xc0 dev_hard_start_xmit+0x11e/0x420 sch_direct_xmit+0xc3/0x640 __dev_queue_xmit+0x61c/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 __tcp_send_ack+0x1b8/0x340 tcp_send_ack+0x23/0x30 __tcp_ack_snd_check+0xa8/0x530 ? srso_alias_return_thunk+0x5/0xfbef5 tcp_rcv_established+0x412/0xd70 tcp_v4_do_rcv+0x299/0x420 tcp_v4_rcv+0x1991/0x1e10 ip_protocol_deliver_rcu+0x50/0x220 ip_local_deliver_finish+0x158/0x260 ip_local_deliver+0xc8/0xe0 ip_rcv+0xe5/0x1d0 ? __pfx_ip_rcv+0x10/0x10 __netif_receive_skb_one_core+0xce/0xe0 ? process_backlog+0x28b/0x9f0 __netif_receive_skb+0x34/0xd0 ? process_backlog+0x28b/0x9f0 process_backlog+0x2cb/0x9f0 __napi_poll.constprop.0+0x61/0x280 net_rx_action+0x332/0x670 ? srso_alias_return_thunk+0x5/0xfbef5 ? find_held_lock+0x2b/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 handle_softirqs+0xda/0x480 ? __dev_queue_xmit+0xa2c/0x1450 do_softirq+0xa1/0xd0 </IRQ> <TASK> __local_bh_enable_ip+0xc8/0xe0 ? __dev_queue_xmit+0xa2c/0x1450 __dev_queue_xmit+0xa48/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 tcp_write_xmit+0x766/0x2fb0 ? __entry_text_end+0x102ba9/0x102bad ? srso_alias_return_thunk+0x5/0xfbef5 ? __might_fault+0x74/0xc0 ? srso_alias_return_thunk+0x5/0xfbef5 __tcp_push_pending_frames+0x56/0x190 tcp_push+0x117/0x310 tcp_sendmsg_locked+0x14c1/0x1740 tcp_sendmsg+0x28/0x40 inet_sendmsg+0x5d/0x90 sock_write_iter+0x242/0x2b0 vfs_write+0x68d/0x800 ? __pfx_sock_write_iter+0x10/0x10 ksys_write+0xc8/0xf0 __x64_sys_write+0x3d/0x50 x64_sys_call+0xfaf/0x1f50 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f4d143af992 Code: c3 8b 07 85 c0 75 24 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> e9 01 cc ff ff 41 54 b8 02 00 00 0 RSP: 002b:00007ffd65032058 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f4d143af992 RDX: 0000000000000025 RSI: 00007f4d143f3bcc RDI: 0000000000000005 RBP: 00007f4d143f2b28 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4d143f3bcc R13: 0000000000000005 R14: 0000000000000000 R15: 00007ffd650323f0 </TASK> Fixes: 0b2c597 ("l2tp: close all race conditions in l2tp_tunnel_register()") Suggested-by: Eric Dumazet <[email protected]> Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=6acef9e0a4d1f46c83d4 CC: [email protected] CC: [email protected] Signed-off-by: James Chapman <[email protected]> Signed-off-by: Tom Parkin <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

attempts to retrofit memory safety onto C are increasingly annoying ------------[ cut here ]------------ memcpy: detected field-spanning write (size 4) of single field "&k.replicas" at fs/bcachefs/replicas.c:454 (size 3) WARNING: CPU: 5 PID: 6525 at fs/bcachefs/replicas.c:454 bch2_replicas_gc2+0x2cb/0x400 [bcachefs] bch2_replicas_gc2+0x2cb/0x400: bch2_replicas_gc2 at /home/ojab/src/bcachefs/fs/bcachefs/replicas.c:454 (discriminator 3) Modules linked in: dm_mod tun nf_conntrack_netlink nfnetlink xt_addrtype br_netfilter overlay msr sctp bcachefs lz4hc_compress lz4_compress libcrc32c xor raid6_pq lz4_decompress pps_ldisc pps_core wireguard libchacha20poly1305 chacha_x86_64 poly1305_x86_64 ip6_udp_tunnel udp_tunnel curve25519_x86_64 libcurve25519_generic libchacha sit tunnel4 ip_tunnel af_packet bridge stp llc ip6table_nat ip6table_filter ip6_tables xt_MASQUERADE xt_conntrack iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter ip_tables x_tables tcp_bbr sch_fq_codel efivarfs nls_iso8859_1 nls_cp437 vfat fat cdc_mbim cdc_wdm cdc_ncm cdc_ether usbnet r8152 input_leds joydev mii amdgpu mousedev hid_generic usbhid hid ath10k_pci amd_atl edac_mce_amd ath10k_core kvm_amd ath kvm mac80211 bfq crc32_pclmul crc32c_intel polyval_clmulni polyval_generic sha512_ssse3 sha256_ssse3 sha1_ssse3 snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg i2c_algo_bit drm_exec snd_hda_codec r8169 drm_suballoc_helper aesni_intel gf128mul crypto_simd amdxcp realtek mfd_core tpm_crb drm_buddy snd_hwdep mdio_devres libarc4 cryptd tpm_tis wmi_bmof cfg80211 evdev libphy snd_hda_core tpm_tis_core gpu_sched rapl xhci_pci xhci_hcd snd_pcm drm_display_helper snd_timer tpm sp5100_tco rfkill efi_pstore mpt3sas drm_ttm_helper ahci usbcore libaescfb ccp snd ttm 8250 libahci watchdog soundcore raid_class sha1_generic acpi_cpufreq k10temp 8250_base usb_common scsi_transport_sas i2c_piix4 hwmon video serial_mctrl_gpio serial_base ecdh_generic wmi rtc_cmos backlight ecc gpio_amdpt rng_core gpio_generic button CPU: 5 UID: 0 PID: 6525 Comm: bcachefs Tainted: G W 6.11.0-rc1-ojab-00058-g224bc118aec9 AsahiLinux#6 6d5debde398d2a84851f42ab300dae32c2992027 Tainted: [W]=WARN RIP: 0010:bch2_replicas_gc2+0x2cb/0x400 [bcachefs] Code: c7 c2 60 91 d1 c1 48 89 c6 48 c7 c7 98 91 d1 c1 4c 89 14 24 44 89 5c 24 08 48 89 44 24 20 c6 05 fa 68 04 00 01 e8 05 a3 40 e4 <0f> 0b 4c 8b 14 24 44 8b 5c 24 08 48 8b 44 24 20 e9 55 fe ff ff 8b RSP: 0018:ffffb434c9263d60 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9a8efa79cc00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffb434c9263de0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000005 R13: ffff9a8efa73c300 R14: ffff9a8d9e880000 R15: ffff9a8d9e8806f8 FS: 0000000000000000(0000) GS:ffff9a9410c80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000565423373090 CR3: 0000000164e30000 CR4: 00000000003506f0 Call Trace: <TASK> ? __warn+0x97/0x150 ? bch2_replicas_gc2+0x2cb/0x400 [bcachefs 9803eca5e131ef28f26250ede34072d5b50d98b3] bch2_replicas_gc2+0x2cb/0x400: bch2_replicas_gc2 at /home/ojab/src/bcachefs/fs/bcachefs/replicas.c:454 (discriminator 3) ? report_bug+0x196/0x1c0 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x17/0x80 ? __wake_up_klogd.part.0+0x4c/0x80 ? asm_exc_invalid_op+0x16/0x20 ? bch2_replicas_gc2+0x2cb/0x400 [bcachefs 9803eca5e131ef28f26250ede34072d5b50d98b3] bch2_replicas_gc2+0x2cb/0x400: bch2_replicas_gc2 at /home/ojab/src/bcachefs/fs/bcachefs/replicas.c:454 (discriminator 3) ? bch2_dev_usage_read+0xa0/0xa0 [bcachefs 9803eca5e131ef28f26250ede34072d5b50d98b3] bch2_dev_usage_read+0xa0/0xa0: discard_in_flight_remove at /home/ojab/src/bcachefs/fs/bcachefs/alloc_background.c:1712 Signed-off-by: Kent Overstreet <[email protected]>

commit 5a44bb0 upstream. We might run into a SIE validity if gisa has been disabled either via using kernel parameter "kvm.use_gisa=0" or by setting the related sysfs attribute to N (echo N >/sys/module/kvm/parameters/use_gisa). The validity is caused by an invalid value in the SIE control block's gisa designation. That happens because we pass the uninitialized gisa origin to virt_to_phys() before writing it to the gisa designation. To fix this we return 0 in kvm_s390_get_gisa_desc() if the origin is 0. kvm_s390_get_gisa_desc() is used to determine which gisa designation to set in the SIE control block. A value of 0 in the gisa designation disables gisa usage. The issue surfaces in the host kernel with the following kernel message as soon a new kvm guest start is attemted. kvm: unhandled validity intercept 0x1011 WARNING: CPU: 0 PID: 781237 at arch/s390/kvm/intercept.c:101 kvm_handle_sie_intercept+0x42e/0x4d0 [kvm] Modules linked in: vhost_net tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT xt_tcpudp nft_compat x_tables nf_nat_tftp nf_conntrack_tftp vfio_pci_core irqbypass vhost_vsock vmw_vsock_virtio_transport_common vsock vhost vhost_iotlb kvm nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables sunrpc mlx5_ib ib_uverbs ib_core mlx5_core uvdevice s390_trng eadm_sch vfio_ccw zcrypt_cex4 mdev vfio_iommu_type1 vfio sch_fq_codel drm i2c_core loop drm_panel_orientation_quirks configfs nfnetlink lcs ctcm fsm dm_service_time ghash_s390 prng chacha_s390 libchacha aes_s390 des_s390 libdes sha3_512_s390 sha3_256_s390 sha512_s390 sha256_s390 sha1_s390 sha_common dm_mirror dm_region_hash dm_log zfcp scsi_transport_fc scsi_dh_rdac scsi_dh_emc scsi_dh_alua pkey zcrypt dm_multipath rng_core autofs4 [last unloaded: vfio_pci] CPU: 0 PID: 781237 Comm: CPU 0/KVM Not tainted 6.10.0-08682-gcad9f11498ea #6 Hardware name: IBM 3931 A01 701 (LPAR) Krnl PSW : 0704c00180000000 000003d93deb0122 (kvm_handle_sie_intercept+0x432/0x4d0 [kvm]) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 Krnl GPRS: 000003d900000027 000003d900000023 0000000000000028 000002cd00000000 000002d063a00900 00000359c6daf708 00000000000bebb5 0000000000001eff 000002cfd82e9000 000002cfd80bc000 0000000000001011 000003d93deda412 000003ff8962df98 000003d93de77ce0 000003d93deb011e 00000359c6daf960 Krnl Code: 000003d93deb0112: c020fffe7259 larl %r2,000003d93de7e5c4 000003d93deb0118: c0e53fa8beac brasl %r14,000003d9bd3c7e70 #000003d93deb011e: af000000 mc 0,0 >000003d93deb0122: a728ffea lhi %r2,-22 000003d93deb0126: a7f4fe24 brc 15,000003d93deafd6e 000003d93deb012a: 9101f0b0 tm 176(%r15),1 000003d93deb012e: a774fe48 brc 7,000003d93deafdbe 000003d93deb0132: 40a0f0ae sth %r10,174(%r15) Call Trace: [<000003d93deb0122>] kvm_handle_sie_intercept+0x432/0x4d0 [kvm] ([<000003d93deb011e>] kvm_handle_sie_intercept+0x42e/0x4d0 [kvm]) [<000003d93deacc10>] vcpu_post_run+0x1d0/0x3b0 [kvm] [<000003d93deaceda>] __vcpu_run+0xea/0x2d0 [kvm] [<000003d93dead9da>] kvm_arch_vcpu_ioctl_run+0x16a/0x430 [kvm] [<000003d93de93ee0>] kvm_vcpu_ioctl+0x190/0x7c0 [kvm] [<000003d9bd728b4e>] vfs_ioctl+0x2e/0x70 [<000003d9bd72a092>] __s390x_sys_ioctl+0xc2/0xd0 [<000003d9be0e9222>] __do_syscall+0x1f2/0x2e0 [<000003d9be0f9a90>] system_call+0x70/0x98 Last Breaking-Event-Address: [<000003d9bd3c7f58>] __warn_printk+0xe8/0xf0 Cc: [email protected] Reported-by: Christian Borntraeger <[email protected]> Fixes: fe0ef00 ("KVM: s390: sort out physical vs virtual pointers usage") Signed-off-by: Michael Mueller <[email protected]> Tested-by: Christian Borntraeger <[email protected]> Reviewed-by: Janosch Frank <[email protected]> Link: https://lore.kernel.org/r/[email protected] Message-ID: <[email protected]> Signed-off-by: Janosch Frank <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit b313a8c ] Lockdep reported a warning in Linux version 6.6: [ 414.344659] ================================ [ 414.345155] WARNING: inconsistent lock state [ 414.345658] 6.6.0-07439-gba2303cacfda #6 Not tainted [ 414.346221] -------------------------------- [ 414.346712] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 414.347545] kworker/u10:3/1152 [HC0[0]:SC0[0]:HE0:SE1] takes: [ 414.349245] ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0 [ 414.351204] {IN-SOFTIRQ-W} state was registered at: [ 414.351751] lock_acquire+0x18d/0x460 [ 414.352218] _raw_spin_lock_irqsave+0x39/0x60 [ 414.352769] __wake_up_common_lock+0x22/0x60 [ 414.353289] sbitmap_queue_wake_up+0x375/0x4f0 [ 414.353829] sbitmap_queue_clear+0xdd/0x270 [ 414.354338] blk_mq_put_tag+0xdf/0x170 [ 414.354807] __blk_mq_free_request+0x381/0x4d0 [ 414.355335] blk_mq_free_request+0x28b/0x3e0 [ 414.355847] __blk_mq_end_request+0x242/0xc30 [ 414.356367] scsi_end_request+0x2c1/0x830 [ 414.345155] WARNING: inconsistent lock state [ 414.345658] 6.6.0-07439-gba2303cacfda #6 Not tainted [ 414.346221] -------------------------------- [ 414.346712] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 414.347545] kworker/u10:3/1152 [HC0[0]:SC0[0]:HE0:SE1] takes: [ 414.349245] ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0 [ 414.351204] {IN-SOFTIRQ-W} state was registered at: [ 414.351751] lock_acquire+0x18d/0x460 [ 414.352218] _raw_spin_lock_irqsave+0x39/0x60 [ 414.352769] __wake_up_common_lock+0x22/0x60 [ 414.353289] sbitmap_queue_wake_up+0x375/0x4f0 [ 414.353829] sbitmap_queue_clear+0xdd/0x270 [ 414.354338] blk_mq_put_tag+0xdf/0x170 [ 414.354807] __blk_mq_free_request+0x381/0x4d0 [ 414.355335] blk_mq_free_request+0x28b/0x3e0 [ 414.355847] __blk_mq_end_request+0x242/0xc30 [ 414.356367] scsi_end_request+0x2c1/0x830 [ 414.356863] scsi_io_completion+0x177/0x1610 [ 414.357379] scsi_complete+0x12f/0x260 [ 414.357856] blk_complete_reqs+0xba/0xf0 [ 414.358338] __do_softirq+0x1b0/0x7a2 [ 414.358796] irq_exit_rcu+0x14b/0x1a0 [ 414.359262] sysvec_call_function_single+0xaf/0xc0 [ 414.359828] asm_sysvec_call_function_single+0x1a/0x20 [ 414.360426] default_idle+0x1e/0x30 [ 414.360873] default_idle_call+0x9b/0x1f0 [ 414.361390] do_idle+0x2d2/0x3e0 [ 414.361819] cpu_startup_entry+0x55/0x60 [ 414.362314] start_secondary+0x235/0x2b0 [ 414.362809] secondary_startup_64_no_verify+0x18f/0x19b [ 414.363413] irq event stamp: 428794 [ 414.363825] hardirqs last enabled at (428793): [<ffffffff816bfd1c>] ktime_get+0x1dc/0x200 [ 414.364694] hardirqs last disabled at (428794): [<ffffffff85470177>] _raw_spin_lock_irq+0x47/0x50 [ 414.365629] softirqs last enabled at (428444): [<ffffffff85474780>] __do_softirq+0x540/0x7a2 [ 414.366522] softirqs last disabled at (428419): [<ffffffff813f65ab>] irq_exit_rcu+0x14b/0x1a0 [ 414.367425] other info that might help us debug this: [ 414.368194] Possible unsafe locking scenario: [ 414.368900] CPU0 [ 414.369225] ---- [ 414.369548] lock(&sbq->ws[i].wait); [ 414.370000] <Interrupt> [ 414.370342] lock(&sbq->ws[i].wait); [ 414.370802] *** DEADLOCK *** [ 414.371569] 5 locks held by kworker/u10:3/1152: [ 414.372088] #0: ffff88810130e938 ((wq_completion)writeback){+.+.}-{0:0}, at: process_scheduled_works+0x357/0x13f0 [ 414.373180] #1: ffff88810201fdb8 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}, at: process_scheduled_works+0x3a3/0x13f0 [ 414.374384] #2: ffffffff86ffbdc0 (rcu_read_lock){....}-{1:2}, at: blk_mq_run_hw_queue+0x637/0xa00 [ 414.375342] #3: ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0 [ 414.376377] #4: ffff888106205a08 (&hctx->dispatch_wait_lock){+.-.}-{2:2}, at: blk_mq_dispatch_rq_list+0x1337/0x1ee0 [ 414.378607] stack backtrace: [ 414.379177] CPU: 0 PID: 1152 Comm: kworker/u10:3 Not tainted 6.6.0-07439-gba2303cacfda #6 [ 414.380032] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 414.381177] Workqueue: writeback wb_workfn (flush-253:0) [ 414.381805] Call Trace: [ 414.382136] <TASK> [ 414.382429] dump_stack_lvl+0x91/0xf0 [ 414.382884] mark_lock_irq+0xb3b/0x1260 [ 414.383367] ? __pfx_mark_lock_irq+0x10/0x10 [ 414.383889] ? stack_trace_save+0x8e/0xc0 [ 414.384373] ? __pfx_stack_trace_save+0x10/0x10 [ 414.384903] ? graph_lock+0xcf/0x410 [ 414.385350] ? save_trace+0x3d/0xc70 [ 414.385808] mark_lock.part.20+0x56d/0xa90 [ 414.386317] mark_held_locks+0xb0/0x110 [ 414.386791] ? __pfx_do_raw_spin_lock+0x10/0x10 [ 414.387320] lockdep_hardirqs_on_prepare+0x297/0x3f0 [ 414.387901] ? _raw_spin_unlock_irq+0x28/0x50 [ 414.388422] trace_hardirqs_on+0x58/0x100 [ 414.388917] _raw_spin_unlock_irq+0x28/0x50 [ 414.389422] __blk_mq_tag_busy+0x1d6/0x2a0 [ 414.389920] __blk_mq_get_driver_tag+0x761/0x9f0 [ 414.390899] blk_mq_dispatch_rq_list+0x1780/0x1ee0 [ 414.391473] ? __pfx_blk_mq_dispatch_rq_list+0x10/0x10 [ 414.392070] ? sbitmap_get+0x2b8/0x450 [ 414.392533] ? __blk_mq_get_driver_tag+0x210/0x9f0 [ 414.393095] __blk_mq_sched_dispatch_requests+0xd99/0x1690 [ 414.393730] ? elv_attempt_insert_merge+0x1b1/0x420 [ 414.394302] ? __pfx___blk_mq_sched_dispatch_requests+0x10/0x10 [ 414.394970] ? lock_acquire+0x18d/0x460 [ 414.395456] ? blk_mq_run_hw_queue+0x637/0xa00 [ 414.395986] ? __pfx_lock_acquire+0x10/0x10 [ 414.396499] blk_mq_sched_dispatch_requests+0x109/0x190 [ 414.397100] blk_mq_run_hw_queue+0x66e/0xa00 [ 414.397616] blk_mq_flush_plug_list.part.17+0x614/0x2030 [ 414.398244] ? __pfx_blk_mq_flush_plug_list.part.17+0x10/0x10 [ 414.398897] ? writeback_sb_inodes+0x241/0xcc0 [ 414.399429] blk_mq_flush_plug_list+0x65/0x80 [ 414.399957] __blk_flush_plug+0x2f1/0x530 [ 414.400458] ? __pfx___blk_flush_plug+0x10/0x10 [ 414.400999] blk_finish_plug+0x59/0xa0 [ 414.401467] wb_writeback+0x7cc/0x920 [ 414.401935] ? __pfx_wb_writeback+0x10/0x10 [ 414.402442] ? mark_held_locks+0xb0/0x110 [ 414.402931] ? __pfx_do_raw_spin_lock+0x10/0x10 [ 414.403462] ? lockdep_hardirqs_on_prepare+0x297/0x3f0 [ 414.404062] wb_workfn+0x2b3/0xcf0 [ 414.404500] ? __pfx_wb_workfn+0x10/0x10 [ 414.404989] process_scheduled_works+0x432/0x13f0 [ 414.405546] ? __pfx_process_scheduled_works+0x10/0x10 [ 414.406139] ? do_raw_spin_lock+0x101/0x2a0 [ 414.406641] ? assign_work+0x19b/0x240 [ 414.407106] ? lock_is_held_type+0x9d/0x110 [ 414.407604] worker_thread+0x6f2/0x1160 [ 414.408075] ? __kthread_parkme+0x62/0x210 [ 414.408572] ? lockdep_hardirqs_on_prepare+0x297/0x3f0 [ 414.409168] ? __kthread_parkme+0x13c/0x210 [ 414.409678] ? __pfx_worker_thread+0x10/0x10 [ 414.410191] kthread+0x33c/0x440 [ 414.410602] ? __pfx_kthread+0x10/0x10 [ 414.411068] ret_from_fork+0x4d/0x80 [ 414.411526] ? __pfx_kthread+0x10/0x10 [ 414.411993] ret_from_fork_asm+0x1b/0x30 [ 414.412489] </TASK> When interrupt is turned on while a lock holding by spin_lock_irq it throws a warning because of potential deadlock. blk_mq_prep_dispatch_rq blk_mq_get_driver_tag __blk_mq_get_driver_tag __blk_mq_alloc_driver_tag blk_mq_tag_busy -> tag is already busy // failed to get driver tag blk_mq_mark_tag_wait spin_lock_irq(&wq->lock) -> lock A (&sbq->ws[i].wait) __add_wait_queue(wq, wait) -> wait queue active blk_mq_get_driver_tag __blk_mq_tag_busy -> 1) tag must be idle, which means there can't be inflight IO spin_lock_irq(&tags->lock) -> lock B (hctx->tags) spin_unlock_irq(&tags->lock) -> unlock B, turn on interrupt accidentally -> 2) context must be preempt by IO interrupt to trigger deadlock. As shown above, the deadlock is not possible in theory, but the warning still need to be fixed. Fix it by using spin_lock_irqsave to get lockB instead of spin_lock_irq. Fixes: 4f1731d ("blk-mq: fix potential io hang by wrong 'wake_batch'") Signed-off-by: Li Lingfeng <[email protected]> Reviewed-by: Ming Lei <[email protected]> Reviewed-by: Yu Kuai <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

We might run into a SIE validity if gisa has been disabled either via using kernel parameter "kvm.use_gisa=0" or by setting the related sysfs attribute to N (echo N >/sys/module/kvm/parameters/use_gisa). The validity is caused by an invalid value in the SIE control block's gisa designation. That happens because we pass the uninitialized gisa origin to virt_to_phys() before writing it to the gisa designation. To fix this we return 0 in kvm_s390_get_gisa_desc() if the origin is 0. kvm_s390_get_gisa_desc() is used to determine which gisa designation to set in the SIE control block. A value of 0 in the gisa designation disables gisa usage. The issue surfaces in the host kernel with the following kernel message as soon a new kvm guest start is attemted. kvm: unhandled validity intercept 0x1011 WARNING: CPU: 0 PID: 781237 at arch/s390/kvm/intercept.c:101 kvm_handle_sie_intercept+0x42e/0x4d0 [kvm] Modules linked in: vhost_net tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT xt_tcpudp nft_compat x_tables nf_nat_tftp nf_conntrack_tftp vfio_pci_core irqbypass vhost_vsock vmw_vsock_virtio_transport_common vsock vhost vhost_iotlb kvm nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables sunrpc mlx5_ib ib_uverbs ib_core mlx5_core uvdevice s390_trng eadm_sch vfio_ccw zcrypt_cex4 mdev vfio_iommu_type1 vfio sch_fq_codel drm i2c_core loop drm_panel_orientation_quirks configfs nfnetlink lcs ctcm fsm dm_service_time ghash_s390 prng chacha_s390 libchacha aes_s390 des_s390 libdes sha3_512_s390 sha3_256_s390 sha512_s390 sha256_s390 sha1_s390 sha_common dm_mirror dm_region_hash dm_log zfcp scsi_transport_fc scsi_dh_rdac scsi_dh_emc scsi_dh_alua pkey zcrypt dm_multipath rng_core autofs4 [last unloaded: vfio_pci] CPU: 0 PID: 781237 Comm: CPU 0/KVM Not tainted 6.10.0-08682-gcad9f11498ea #6 Hardware name: IBM 3931 A01 701 (LPAR) Krnl PSW : 0704c00180000000 000003d93deb0122 (kvm_handle_sie_intercept+0x432/0x4d0 [kvm]) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 Krnl GPRS: 000003d900000027 000003d900000023 0000000000000028 000002cd00000000 000002d063a00900 00000359c6daf708 00000000000bebb5 0000000000001eff 000002cfd82e9000 000002cfd80bc000 0000000000001011 000003d93deda412 000003ff8962df98 000003d93de77ce0 000003d93deb011e 00000359c6daf960 Krnl Code: 000003d93deb0112: c020fffe7259 larl %r2,000003d93de7e5c4 000003d93deb0118: c0e53fa8beac brasl %r14,000003d9bd3c7e70 #000003d93deb011e: af000000 mc 0,0 >000003d93deb0122: a728ffea lhi %r2,-22 000003d93deb0126: a7f4fe24 brc 15,000003d93deafd6e 000003d93deb012a: 9101f0b0 tm 176(%r15),1 000003d93deb012e: a774fe48 brc 7,000003d93deafdbe 000003d93deb0132: 40a0f0ae sth %r10,174(%r15) Call Trace: [<000003d93deb0122>] kvm_handle_sie_intercept+0x432/0x4d0 [kvm] ([<000003d93deb011e>] kvm_handle_sie_intercept+0x42e/0x4d0 [kvm]) [<000003d93deacc10>] vcpu_post_run+0x1d0/0x3b0 [kvm] [<000003d93deaceda>] __vcpu_run+0xea/0x2d0 [kvm] [<000003d93dead9da>] kvm_arch_vcpu_ioctl_run+0x16a/0x430 [kvm] [<000003d93de93ee0>] kvm_vcpu_ioctl+0x190/0x7c0 [kvm] [<000003d9bd728b4e>] vfs_ioctl+0x2e/0x70 [<000003d9bd72a092>] __s390x_sys_ioctl+0xc2/0xd0 [<000003d9be0e9222>] __do_syscall+0x1f2/0x2e0 [<000003d9be0f9a90>] system_call+0x70/0x98 Last Breaking-Event-Address: [<000003d9bd3c7f58>] __warn_printk+0xe8/0xf0 Cc: [email protected] Reported-by: Christian Borntraeger <[email protected]> Fixes: fe0ef00 ("KVM: s390: sort out physical vs virtual pointers usage") Signed-off-by: Michael Mueller <[email protected]> Tested-by: Christian Borntraeger <[email protected]> Reviewed-by: Janosch Frank <[email protected]> Link: https://lore.kernel.org/r/[email protected] Message-ID: <[email protected]> Signed-off-by: Janosch Frank <[email protected]>

When l2tp tunnels use a socket provided by userspace, we can hit lockdep splats like the below when data is transmitted through another (unrelated) userspace socket which then gets routed over l2tp. This issue was previously discussed here: https://lore.kernel.org/netdev/[email protected]/ The solution is to have lockdep treat socket locks of l2tp tunnel sockets separately than those of standard INET sockets. To do so, use a different lockdep subclass where lock nesting is possible. ============================================ WARNING: possible recursive locking detected 6.10.0+ #34 Not tainted -------------------------------------------- iperf3/771 is trying to acquire lock: ffff8881027601d8 (slock-AF_INET/1){+.-.}-{2:2}, at: l2tp_xmit_skb+0x243/0x9d0 but task is already holding lock: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_INET/1); lock(slock-AF_INET/1); *** DEADLOCK *** May be due to missing lock nesting notation 10 locks held by iperf3/771: #0: ffff888102650258 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x1a/0x40 #1: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 #2: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 #3: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x28b/0x9f0 #4: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0xf9/0x260 #5: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 #6: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 #7: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 #8: ffffffff822ac1e0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0xcc/0x1450 #9: ffff888101f33258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock#2){+...}-{2:2}, at: __dev_queue_xmit+0x513/0x1450 stack backtrace: CPU: 2 UID: 0 PID: 771 Comm: iperf3 Not tainted 6.10.0+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x69/0xa0 dump_stack+0xc/0x20 __lock_acquire+0x135d/0x2600 ? srso_alias_return_thunk+0x5/0xfbef5 lock_acquire+0xc4/0x2a0 ? l2tp_xmit_skb+0x243/0x9d0 ? __skb_checksum+0xa3/0x540 _raw_spin_lock_nested+0x35/0x50 ? l2tp_xmit_skb+0x243/0x9d0 l2tp_xmit_skb+0x243/0x9d0 l2tp_eth_dev_xmit+0x3c/0xc0 dev_hard_start_xmit+0x11e/0x420 sch_direct_xmit+0xc3/0x640 __dev_queue_xmit+0x61c/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 __tcp_send_ack+0x1b8/0x340 tcp_send_ack+0x23/0x30 __tcp_ack_snd_check+0xa8/0x530 ? srso_alias_return_thunk+0x5/0xfbef5 tcp_rcv_established+0x412/0xd70 tcp_v4_do_rcv+0x299/0x420 tcp_v4_rcv+0x1991/0x1e10 ip_protocol_deliver_rcu+0x50/0x220 ip_local_deliver_finish+0x158/0x260 ip_local_deliver+0xc8/0xe0 ip_rcv+0xe5/0x1d0 ? __pfx_ip_rcv+0x10/0x10 __netif_receive_skb_one_core+0xce/0xe0 ? process_backlog+0x28b/0x9f0 __netif_receive_skb+0x34/0xd0 ? process_backlog+0x28b/0x9f0 process_backlog+0x2cb/0x9f0 __napi_poll.constprop.0+0x61/0x280 net_rx_action+0x332/0x670 ? srso_alias_return_thunk+0x5/0xfbef5 ? find_held_lock+0x2b/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 handle_softirqs+0xda/0x480 ? __dev_queue_xmit+0xa2c/0x1450 do_softirq+0xa1/0xd0 </IRQ> <TASK> __local_bh_enable_ip+0xc8/0xe0 ? __dev_queue_xmit+0xa2c/0x1450 __dev_queue_xmit+0xa48/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 tcp_write_xmit+0x766/0x2fb0 ? __entry_text_end+0x102ba9/0x102bad ? srso_alias_return_thunk+0x5/0xfbef5 ? __might_fault+0x74/0xc0 ? srso_alias_return_thunk+0x5/0xfbef5 __tcp_push_pending_frames+0x56/0x190 tcp_push+0x117/0x310 tcp_sendmsg_locked+0x14c1/0x1740 tcp_sendmsg+0x28/0x40 inet_sendmsg+0x5d/0x90 sock_write_iter+0x242/0x2b0 vfs_write+0x68d/0x800 ? __pfx_sock_write_iter+0x10/0x10 ksys_write+0xc8/0xf0 __x64_sys_write+0x3d/0x50 x64_sys_call+0xfaf/0x1f50 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f4d143af992 Code: c3 8b 07 85 c0 75 24 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> e9 01 cc ff ff 41 54 b8 02 00 00 0 RSP: 002b:00007ffd65032058 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f4d143af992 RDX: 0000000000000025 RSI: 00007f4d143f3bcc RDI: 0000000000000005 RBP: 00007f4d143f2b28 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4d143f3bcc R13: 0000000000000005 R14: 0000000000000000 R15: 00007ffd650323f0 </TASK> Fixes: 0b2c597 ("l2tp: close all race conditions in l2tp_tunnel_register()") Suggested-by: Eric Dumazet <[email protected]> Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=6acef9e0a4d1f46c83d4 CC: [email protected] CC: [email protected] Signed-off-by: James Chapman <[email protected]> Signed-off-by: Tom Parkin <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Lockdep reported a warning in Linux version 6.6: [ 414.344659] ================================ [ 414.345155] WARNING: inconsistent lock state [ 414.345658] 6.6.0-07439-gba2303cacfda #6 Not tainted [ 414.346221] -------------------------------- [ 414.346712] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 414.347545] kworker/u10:3/1152 [HC0[0]:SC0[0]:HE0:SE1] takes: [ 414.349245] ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0 [ 414.351204] {IN-SOFTIRQ-W} state was registered at: [ 414.351751] lock_acquire+0x18d/0x460 [ 414.352218] _raw_spin_lock_irqsave+0x39/0x60 [ 414.352769] __wake_up_common_lock+0x22/0x60 [ 414.353289] sbitmap_queue_wake_up+0x375/0x4f0 [ 414.353829] sbitmap_queue_clear+0xdd/0x270 [ 414.354338] blk_mq_put_tag+0xdf/0x170 [ 414.354807] __blk_mq_free_request+0x381/0x4d0 [ 414.355335] blk_mq_free_request+0x28b/0x3e0 [ 414.355847] __blk_mq_end_request+0x242/0xc30 [ 414.356367] scsi_end_request+0x2c1/0x830 [ 414.345155] WARNING: inconsistent lock state [ 414.345658] 6.6.0-07439-gba2303cacfda #6 Not tainted [ 414.346221] -------------------------------- [ 414.346712] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 414.347545] kworker/u10:3/1152 [HC0[0]:SC0[0]:HE0:SE1] takes: [ 414.349245] ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0 [ 414.351204] {IN-SOFTIRQ-W} state was registered at: [ 414.351751] lock_acquire+0x18d/0x460 [ 414.352218] _raw_spin_lock_irqsave+0x39/0x60 [ 414.352769] __wake_up_common_lock+0x22/0x60 [ 414.353289] sbitmap_queue_wake_up+0x375/0x4f0 [ 414.353829] sbitmap_queue_clear+0xdd/0x270 [ 414.354338] blk_mq_put_tag+0xdf/0x170 [ 414.354807] __blk_mq_free_request+0x381/0x4d0 [ 414.355335] blk_mq_free_request+0x28b/0x3e0 [ 414.355847] __blk_mq_end_request+0x242/0xc30 [ 414.356367] scsi_end_request+0x2c1/0x830 [ 414.356863] scsi_io_completion+0x177/0x1610 [ 414.357379] scsi_complete+0x12f/0x260 [ 414.357856] blk_complete_reqs+0xba/0xf0 [ 414.358338] __do_softirq+0x1b0/0x7a2 [ 414.358796] irq_exit_rcu+0x14b/0x1a0 [ 414.359262] sysvec_call_function_single+0xaf/0xc0 [ 414.359828] asm_sysvec_call_function_single+0x1a/0x20 [ 414.360426] default_idle+0x1e/0x30 [ 414.360873] default_idle_call+0x9b/0x1f0 [ 414.361390] do_idle+0x2d2/0x3e0 [ 414.361819] cpu_startup_entry+0x55/0x60 [ 414.362314] start_secondary+0x235/0x2b0 [ 414.362809] secondary_startup_64_no_verify+0x18f/0x19b [ 414.363413] irq event stamp: 428794 [ 414.363825] hardirqs last enabled at (428793): [<ffffffff816bfd1c>] ktime_get+0x1dc/0x200 [ 414.364694] hardirqs last disabled at (428794): [<ffffffff85470177>] _raw_spin_lock_irq+0x47/0x50 [ 414.365629] softirqs last enabled at (428444): [<ffffffff85474780>] __do_softirq+0x540/0x7a2 [ 414.366522] softirqs last disabled at (428419): [<ffffffff813f65ab>] irq_exit_rcu+0x14b/0x1a0 [ 414.367425] other info that might help us debug this: [ 414.368194] Possible unsafe locking scenario: [ 414.368900] CPU0 [ 414.369225] ---- [ 414.369548] lock(&sbq->ws[i].wait); [ 414.370000] <Interrupt> [ 414.370342] lock(&sbq->ws[i].wait); [ 414.370802] *** DEADLOCK *** [ 414.371569] 5 locks held by kworker/u10:3/1152: [ 414.372088] #0: ffff88810130e938 ((wq_completion)writeback){+.+.}-{0:0}, at: process_scheduled_works+0x357/0x13f0 [ 414.373180] #1: ffff88810201fdb8 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}, at: process_scheduled_works+0x3a3/0x13f0 [ 414.374384] #2: ffffffff86ffbdc0 (rcu_read_lock){....}-{1:2}, at: blk_mq_run_hw_queue+0x637/0xa00 [ 414.375342] #3: ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0 [ 414.376377] #4: ffff888106205a08 (&hctx->dispatch_wait_lock){+.-.}-{2:2}, at: blk_mq_dispatch_rq_list+0x1337/0x1ee0 [ 414.378607] stack backtrace: [ 414.379177] CPU: 0 PID: 1152 Comm: kworker/u10:3 Not tainted 6.6.0-07439-gba2303cacfda #6 [ 414.380032] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 414.381177] Workqueue: writeback wb_workfn (flush-253:0) [ 414.381805] Call Trace: [ 414.382136] <TASK> [ 414.382429] dump_stack_lvl+0x91/0xf0 [ 414.382884] mark_lock_irq+0xb3b/0x1260 [ 414.383367] ? __pfx_mark_lock_irq+0x10/0x10 [ 414.383889] ? stack_trace_save+0x8e/0xc0 [ 414.384373] ? __pfx_stack_trace_save+0x10/0x10 [ 414.384903] ? graph_lock+0xcf/0x410 [ 414.385350] ? save_trace+0x3d/0xc70 [ 414.385808] mark_lock.part.20+0x56d/0xa90 [ 414.386317] mark_held_locks+0xb0/0x110 [ 414.386791] ? __pfx_do_raw_spin_lock+0x10/0x10 [ 414.387320] lockdep_hardirqs_on_prepare+0x297/0x3f0 [ 414.387901] ? _raw_spin_unlock_irq+0x28/0x50 [ 414.388422] trace_hardirqs_on+0x58/0x100 [ 414.388917] _raw_spin_unlock_irq+0x28/0x50 [ 414.389422] __blk_mq_tag_busy+0x1d6/0x2a0 [ 414.389920] __blk_mq_get_driver_tag+0x761/0x9f0 [ 414.390899] blk_mq_dispatch_rq_list+0x1780/0x1ee0 [ 414.391473] ? __pfx_blk_mq_dispatch_rq_list+0x10/0x10 [ 414.392070] ? sbitmap_get+0x2b8/0x450 [ 414.392533] ? __blk_mq_get_driver_tag+0x210/0x9f0 [ 414.393095] __blk_mq_sched_dispatch_requests+0xd99/0x1690 [ 414.393730] ? elv_attempt_insert_merge+0x1b1/0x420 [ 414.394302] ? __pfx___blk_mq_sched_dispatch_requests+0x10/0x10 [ 414.394970] ? lock_acquire+0x18d/0x460 [ 414.395456] ? blk_mq_run_hw_queue+0x637/0xa00 [ 414.395986] ? __pfx_lock_acquire+0x10/0x10 [ 414.396499] blk_mq_sched_dispatch_requests+0x109/0x190 [ 414.397100] blk_mq_run_hw_queue+0x66e/0xa00 [ 414.397616] blk_mq_flush_plug_list.part.17+0x614/0x2030 [ 414.398244] ? __pfx_blk_mq_flush_plug_list.part.17+0x10/0x10 [ 414.398897] ? writeback_sb_inodes+0x241/0xcc0 [ 414.399429] blk_mq_flush_plug_list+0x65/0x80 [ 414.399957] __blk_flush_plug+0x2f1/0x530 [ 414.400458] ? __pfx___blk_flush_plug+0x10/0x10 [ 414.400999] blk_finish_plug+0x59/0xa0 [ 414.401467] wb_writeback+0x7cc/0x920 [ 414.401935] ? __pfx_wb_writeback+0x10/0x10 [ 414.402442] ? mark_held_locks+0xb0/0x110 [ 414.402931] ? __pfx_do_raw_spin_lock+0x10/0x10 [ 414.403462] ? lockdep_hardirqs_on_prepare+0x297/0x3f0 [ 414.404062] wb_workfn+0x2b3/0xcf0 [ 414.404500] ? __pfx_wb_workfn+0x10/0x10 [ 414.404989] process_scheduled_works+0x432/0x13f0 [ 414.405546] ? __pfx_process_scheduled_works+0x10/0x10 [ 414.406139] ? do_raw_spin_lock+0x101/0x2a0 [ 414.406641] ? assign_work+0x19b/0x240 [ 414.407106] ? lock_is_held_type+0x9d/0x110 [ 414.407604] worker_thread+0x6f2/0x1160 [ 414.408075] ? __kthread_parkme+0x62/0x210 [ 414.408572] ? lockdep_hardirqs_on_prepare+0x297/0x3f0 [ 414.409168] ? __kthread_parkme+0x13c/0x210 [ 414.409678] ? __pfx_worker_thread+0x10/0x10 [ 414.410191] kthread+0x33c/0x440 [ 414.410602] ? __pfx_kthread+0x10/0x10 [ 414.411068] ret_from_fork+0x4d/0x80 [ 414.411526] ? __pfx_kthread+0x10/0x10 [ 414.411993] ret_from_fork_asm+0x1b/0x30 [ 414.412489] </TASK> When interrupt is turned on while a lock holding by spin_lock_irq it throws a warning because of potential deadlock. blk_mq_prep_dispatch_rq blk_mq_get_driver_tag __blk_mq_get_driver_tag __blk_mq_alloc_driver_tag blk_mq_tag_busy -> tag is already busy // failed to get driver tag blk_mq_mark_tag_wait spin_lock_irq(&wq->lock) -> lock A (&sbq->ws[i].wait) __add_wait_queue(wq, wait) -> wait queue active blk_mq_get_driver_tag __blk_mq_tag_busy -> 1) tag must be idle, which means there can't be inflight IO spin_lock_irq(&tags->lock) -> lock B (hctx->tags) spin_unlock_irq(&tags->lock) -> unlock B, turn on interrupt accidentally -> 2) context must be preempt by IO interrupt to trigger deadlock. As shown above, the deadlock is not possible in theory, but the warning still need to be fixed. Fix it by using spin_lock_irqsave to get lockB instead of spin_lock_irq. Fixes: 4f1731d ("blk-mq: fix potential io hang by wrong 'wake_batch'") Signed-off-by: Li Lingfeng <[email protected]> Reviewed-by: Ming Lei <[email protected]> Reviewed-by: Yu Kuai <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>

Currently, migrate_pages_batch() can lock multiple locked folios with an arbitrary order. Although folio_trylock() is used to avoid deadlock as commit 2ef7dbb ("migrate_pages: try migrate in batch asynchronously firstly") mentioned, it seems try_split_folio() is still missing. It was found by compaction stress test when I explicitly enable EROFS compressed files to use large folios, which case I cannot reproduce with the same workload if large folio support is off (current mainline). Typically, filesystem reads (with locked file-backed folios) could use another bdev/meta inode to load some other I/Os (e.g. inode extent metadata or caching compressed data), so the locking order will be: file-backed folios (A) bdev/meta folios (B) The following calltrace shows the deadlock: Thread 1 takes (B) lock and tries to take folio (A) lock Thread 2 takes (A) lock and tries to take folio (B) lock [Thread 1] INFO: task stress:1824 blocked for more than 30 seconds. Tainted: G OE 6.10.0-rc7+ #6 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:stress state:D stack:0 pid:1824 tgid:1824 ppid:1822 flags:0x0000000c Call trace: __switch_to+0xec/0x138 __schedule+0x43c/0xcb0 schedule+0x54/0x198 io_schedule+0x44/0x70 folio_wait_bit_common+0x184/0x3f8 <-- folio mapping ffff00036d69cb18 index 996 (**) __folio_lock+0x24/0x38 migrate_pages_batch+0x77c/0xea0 // try_split_folio (mm/migrate.c:1486:2) // migrate_pages_batch (mm/migrate.c:1734:16) <--- LIST_HEAD(unmap_folios) has .. folio mapping 0xffff0000d184f1d8 index 1711; (*) folio mapping 0xffff0000d184f1d8 index 1712; .. migrate_pages+0xb28/0xe90 compact_zone+0xa08/0x10f0 compact_node+0x9c/0x180 sysctl_compaction_handler+0x8c/0x118 proc_sys_call_handler+0x1a8/0x280 proc_sys_write+0x1c/0x30 vfs_write+0x240/0x380 ksys_write+0x78/0x118 __arm64_sys_write+0x24/0x38 invoke_syscall+0x78/0x108 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x3c/0x148 el0t_64_sync_handler+0x100/0x130 el0t_64_sync+0x190/0x198 [Thread 2] INFO: task stress:1825 blocked for more than 30 seconds. Tainted: G OE 6.10.0-rc7+ #6 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:stress state:D stack:0 pid:1825 tgid:1825 ppid:1822 flags:0x0000000c Call trace: __switch_to+0xec/0x138 __schedule+0x43c/0xcb0 schedule+0x54/0x198 io_schedule+0x44/0x70 folio_wait_bit_common+0x184/0x3f8 <-- folio = 0xfffffdffc6b503c0 (mapping == 0xffff0000d184f1d8 index == 1711) (*) __folio_lock+0x24/0x38 z_erofs_runqueue+0x384/0x9c0 [erofs] z_erofs_readahead+0x21c/0x350 [erofs] <-- folio mapping 0xffff00036d69cb18 range from [992, 1024] (**) read_pages+0x74/0x328 page_cache_ra_order+0x26c/0x348 ondemand_readahead+0x1c0/0x3a0 page_cache_sync_ra+0x9c/0xc0 filemap_get_pages+0xc4/0x708 filemap_read+0x104/0x3a8 generic_file_read_iter+0x4c/0x150 vfs_read+0x27c/0x330 ksys_pread64+0x84/0xd0 __arm64_sys_pread64+0x28/0x40 invoke_syscall+0x78/0x108 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x3c/0x148 el0t_64_sync_handler+0x100/0x130 el0t_64_sync+0x190/0x198 Link: https://lkml.kernel.org/r/[email protected] Fixes: 5dfab10 ("migrate_pages: batch _unmap and _move") Signed-off-by: Gao Xiang <[email protected]> Reviewed-by: "Huang, Ying" <[email protected]> Acked-by: David Hildenbrand <[email protected]> Cc: Matthew Wilcox <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

[ Upstream commit 18ad4df ] 1) initial state, three tasks: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | Λ | Λ | Λ | | | | | | V | V | V | bfqq1 bfqq2 bfqq3 process ref: 1 1 1 2) bfqq1 merged to bfqq2: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | | | Λ \--------------\| | | V V | bfqq1--------->bfqq2 bfqq3 process ref: 0 2 1 3) bfqq2 merged to bfqq3: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) here -> Λ | | \--------------\ \-------------\| V V bfqq1--------->bfqq2---------->bfqq3 process ref: 0 1 3 In this case, IO from Process 1 will get bfqq2 from BIC1 first, and then get bfqq3 through merge chain, and finially handle IO by bfqq3. Howerver, current code will think bfqq2 is owned by BIC1, like initial state, and set bfqq2->bic to BIC1. bfq_insert_request -> by Process 1 bfqq = bfq_init_rq(rq) bfqq = bfq_get_bfqq_handle_split bfqq = bic_to_bfqq -> get bfqq2 from BIC1 bfqq->ref++ rq->elv.priv[0] = bic rq->elv.priv[1] = bfqq if (bfqq_process_refs(bfqq) == 1) bfqq->bic = bic -> record BIC1 to bfqq2 __bfq_insert_request new_bfqq = bfq_setup_cooperator -> get bfqq3 from bfqq2->new_bfqq bfqq_request_freed(bfqq) new_bfqq->ref++ rq->elv.priv[1] = new_bfqq -> handle IO by bfqq3 Fix the problem by checking bfqq is from merge chain fist. And this might fix a following problem reported by our syzkaller(unreproducible): ================================================================== BUG: KASAN: slab-use-after-free in bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] BUG: KASAN: slab-use-after-free in bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] BUG: KASAN: slab-use-after-free in bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 Write of size 1 at addr ffff888123839eb8 by task kworker/0:1H/18595 CPU: 0 PID: 18595 Comm: kworker/0:1H Tainted: G L 6.6.0-07439-gba2303cacfda #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: kblockd blk_mq_requeue_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0x10d/0x610 mm/kasan/report.c:475 kasan_report+0x8e/0xc0 mm/kasan/report.c:588 bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 bfq_get_bfqq_handle_split+0x169/0x5d0 block/bfq-iosched.c:6757 bfq_init_rq block/bfq-iosched.c:6876 [inline] bfq_insert_request block/bfq-iosched.c:6254 [inline] bfq_insert_requests+0x1112/0x5cf0 block/bfq-iosched.c:6304 blk_mq_insert_request+0x290/0x8d0 block/blk-mq.c:2593 blk_mq_requeue_work+0x6bc/0xa70 block/blk-mq.c:1502 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 </TASK> Allocated by task 20776: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x87/0x90 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3458 [inline] kmem_cache_alloc_node+0x1a4/0x6f0 mm/slub.c:3503 ioc_create_icq block/blk-ioc.c:370 [inline] ioc_find_get_icq+0x180/0xaa0 block/blk-ioc.c:436 bfq_prepare_request+0x39/0xf0 block/bfq-iosched.c:6812 blk_mq_rq_ctx_init.isra.7+0x6ac/0xa00 block/blk-mq.c:403 __blk_mq_alloc_requests+0xcc0/0x1070 block/blk-mq.c:517 blk_mq_get_new_requests block/blk-mq.c:2940 [inline] blk_mq_submit_bio+0x624/0x27c0 block/blk-mq.c:3042 __submit_bio+0x331/0x6f0 block/blk-core.c:624 __submit_bio_noacct_mq block/blk-core.c:703 [inline] submit_bio_noacct_nocheck+0x816/0xb40 block/blk-core.c:732 submit_bio_noacct+0x7a6/0x1b50 block/blk-core.c:826 xlog_write_iclog+0x7d5/0xa00 fs/xfs/xfs_log.c:1958 xlog_state_release_iclog+0x3b8/0x720 fs/xfs/xfs_log.c:619 xlog_cil_push_work+0x19c5/0x2270 fs/xfs/xfs_log_cil.c:1330 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 Freed by task 946: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x50 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] __kasan_slab_free+0x12c/0x1c0 mm/kasan/common.c:244 kasan_slab_free include/linux/kasan.h:164 [inline] slab_free_hook mm/slub.c:1815 [inline] slab_free_freelist_hook mm/slub.c:1841 [inline] slab_free mm/slub.c:3786 [inline] kmem_cache_free+0x118/0x6f0 mm/slub.c:3808 rcu_do_batch+0x35c/0xe30 kernel/rcu/tree.c:2189 rcu_core+0x819/0xd90 kernel/rcu/tree.c:2462 __do_softirq+0x1b0/0x7a2 kernel/softirq.c:553 Last potentially related work creation: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 __kasan_record_aux_stack+0xaf/0xc0 mm/kasan/generic.c:492 __call_rcu_common kernel/rcu/tree.c:2712 [inline] call_rcu+0xce/0x1020 kernel/rcu/tree.c:2826 ioc_destroy_icq+0x54c/0x830 block/blk-ioc.c:105 ioc_release_fn+0xf0/0x360 block/blk-ioc.c:124 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 Second to last potentially related work creation: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 __kasan_record_aux_stack+0xaf/0xc0 mm/kasan/generic.c:492 __call_rcu_common kernel/rcu/tree.c:2712 [inline] call_rcu+0xce/0x1020 kernel/rcu/tree.c:2826 ioc_destroy_icq+0x54c/0x830 block/blk-ioc.c:105 ioc_release_fn+0xf0/0x360 block/blk-ioc.c:124 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 The buggy address belongs to the object at ffff888123839d68 which belongs to the cache bfq_io_cq of size 1360 The buggy address is located 336 bytes inside of freed 1360-byte region [ffff888123839d68, ffff88812383a2b8) The buggy address belongs to the physical page: page:ffffea00048e0e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88812383f588 pfn:0x123838 head:ffffea00048e0e00 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x17ffffc0000a40(workingset|slab|head|node=0|zone=2|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 0017ffffc0000a40 ffff88810588c200 ffffea00048ffa10 ffff888105889488 raw: ffff88812383f588 0000000000150006 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888123839d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888123839e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888123839e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888123839f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888123839f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 36eca89 ("block, bfq: add Early Queue Merge (EQM)") Signed-off-by: Yu Kuai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 44d1745 upstream. Use a dedicated mutex to guard kvm_usage_count to fix a potential deadlock on x86 due to a chain of locks and SRCU synchronizations. Translating the below lockdep splat, CPU1 #6 will wait on CPU0 #1, CPU0 #8 will wait on CPU2 #3, and CPU2 #7 will wait on CPU1 #4 (if there's a writer, due to the fairness of r/w semaphores). CPU0 CPU1 CPU2 1 lock(&kvm->slots_lock); 2 lock(&vcpu->mutex); 3 lock(&kvm->srcu); 4 lock(cpu_hotplug_lock); 5 lock(kvm_lock); 6 lock(&kvm->slots_lock); 7 lock(cpu_hotplug_lock); 8 sync(&kvm->srcu); Note, there are likely more potential deadlocks in KVM x86, e.g. the same pattern of taking cpu_hotplug_lock outside of kvm_lock likely exists with __kvmclock_cpufreq_notifier(): cpuhp_cpufreq_online() | -> cpufreq_online() | -> cpufreq_gov_performance_limits() | -> __cpufreq_driver_target() | -> __target_index() | -> cpufreq_freq_transition_begin() | -> cpufreq_notify_transition() | -> ... __kvmclock_cpufreq_notifier() But, actually triggering such deadlocks is beyond rare due to the combination of dependencies and timings involved. E.g. the cpufreq notifier is only used on older CPUs without a constant TSC, mucking with the NX hugepage mitigation while VMs are running is very uncommon, and doing so while also onlining/offlining a CPU (necessary to generate contention on cpu_hotplug_lock) would be even more unusual. The most robust solution to the general cpu_hotplug_lock issue is likely to switch vm_list to be an RCU-protected list, e.g. so that x86's cpufreq notifier doesn't to take kvm_lock. For now, settle for fixing the most blatant deadlock, as switching to an RCU-protected list is a much more involved change, but add a comment in locking.rst to call out that care needs to be taken when walking holding kvm_lock and walking vm_list. ====================================================== WARNING: possible circular locking dependency detected 6.10.0-smp--c257535a0c9d-pip #330 Tainted: G S O ------------------------------------------------------ tee/35048 is trying to acquire lock: ff6a80eced71e0a8 (&kvm->slots_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x179/0x1e0 [kvm] but task is already holding lock: ffffffffc07abb08 (kvm_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x14a/0x1e0 [kvm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (kvm_lock){+.+.}-{3:3}: __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 kvm_dev_ioctl+0x4fb/0xe50 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x2e/0xb0 static_key_slow_inc+0x16/0x30 kvm_lapic_set_base+0x6a/0x1c0 [kvm] kvm_set_apic_base+0x8f/0xe0 [kvm] kvm_set_msr_common+0x9ae/0xf80 [kvm] vmx_set_msr+0xa54/0xbe0 [kvm_intel] __kvm_set_msr+0xb6/0x1a0 [kvm] kvm_arch_vcpu_ioctl+0xeca/0x10c0 [kvm] kvm_vcpu_ioctl+0x485/0x5b0 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&kvm->srcu){.+.+}-{0:0}: __synchronize_srcu+0x44/0x1a0 synchronize_srcu_expedited+0x21/0x30 kvm_swap_active_memslots+0x110/0x1c0 [kvm] kvm_set_memslot+0x360/0x620 [kvm] __kvm_set_memory_region+0x27b/0x300 [kvm] kvm_vm_ioctl_set_memory_region+0x43/0x60 [kvm] kvm_vm_ioctl+0x295/0x650 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&kvm->slots_lock){+.+.}-{3:3}: __lock_acquire+0x15ef/0x2e30 lock_acquire+0xe0/0x260 __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 set_nx_huge_pages+0x179/0x1e0 [kvm] param_attr_store+0x93/0x100 module_attr_store+0x22/0x40 sysfs_kf_write+0x81/0xb0 kernfs_fop_write_iter+0x133/0x1d0 vfs_write+0x28d/0x380 ksys_write+0x70/0xe0 __x64_sys_write+0x1f/0x30 x64_sys_call+0x281b/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Cc: Chao Gao <[email protected]> Fixes: 0bf5049 ("KVM: Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock") Cc: [email protected] Reviewed-by: Kai Huang <[email protected]> Acked-by: Kai Huang <[email protected]> Tested-by: Farrah Chen <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-ID: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit a848c29 ] On the node of an NFS client, some files saved in the mountpoint of the NFS server were copied to another location of the same NFS server. Accidentally, the nfs42_complete_copies() got a NULL-pointer dereference crash with the following syslog: [232064.838881] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232064.839360] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232066.588183] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 [232066.588586] Mem abort info: [232066.588701] ESR = 0x0000000096000007 [232066.588862] EC = 0x25: DABT (current EL), IL = 32 bits [232066.589084] SET = 0, FnV = 0 [232066.589216] EA = 0, S1PTW = 0 [232066.589340] FSC = 0x07: level 3 translation fault [232066.589559] Data abort info: [232066.589683] ISV = 0, ISS = 0x00000007 [232066.589842] CM = 0, WnR = 0 [232066.589967] user pgtable: 64k pages, 48-bit VAs, pgdp=00002000956ff400 [232066.590231] [0000000000000058] pgd=08001100ae100003, p4d=08001100ae100003, pud=08001100ae100003, pmd=08001100b3c00003, pte=0000000000000000 [232066.590757] Internal error: Oops: 96000007 [#1] SMP [232066.590958] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm vhost_net vhost vhost_iotlb tap tun ipt_rpfilter xt_multiport ip_set_hash_ip ip_set_hash_net xfrm_interface xfrm6_tunnel tunnel4 tunnel6 esp4 ah4 wireguard libcurve25519_generic veth xt_addrtype xt_set nf_conntrack_netlink ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_bitmap_port ip_set_hash_ipport dummy ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs iptable_filter sch_ingress nfnetlink_cttimeout vport_gre ip_gre ip_tunnel gre vport_geneve geneve vport_vxlan vxlan ip6_udp_tunnel udp_tunnel openvswitch nf_conncount dm_round_robin dm_service_time dm_multipath xt_nat xt_MASQUERADE nft_chain_nat nf_nat xt_mark xt_conntrack xt_comment nft_compat nft_counter nf_tables nfnetlink ocfs2 ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_ssif nbd overlay 8021q garp mrp bonding tls rfkill sunrpc ext4 mbcache jbd2 [232066.591052] vfat fat cas_cache cas_disk ses enclosure scsi_transport_sas sg acpi_ipmi ipmi_si ipmi_devintf ipmi_msghandler ip_tables vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio dm_mirror dm_region_hash dm_log dm_mod nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc fuse xfs libcrc32c ast drm_vram_helper qla2xxx drm_kms_helper syscopyarea crct10dif_ce sysfillrect ghash_ce sysimgblt sha2_ce fb_sys_fops cec sha256_arm64 sha1_ce drm_ttm_helper ttm nvme_fc igb sbsa_gwdt nvme_fabrics drm nvme_core i2c_algo_bit i40e scsi_transport_fc megaraid_sas aes_neon_bs [232066.596953] CPU: 6 PID: 4124696 Comm: 10.253.166.125- Kdump: loaded Not tainted 5.15.131-9.cl9_ocfs2.aarch64 #1 [232066.597356] Hardware name: Great Wall .\x93\x8e...RF6260 V5/GWMSSE2GL1T, BIOS T656FBE_V3.0.18 2024-01-06 [232066.597721] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [232066.598034] pc : nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.598327] lr : nfs4_reclaim_open_state+0x12c/0x800 [nfsv4] [232066.598595] sp : ffff8000f568fc70 [232066.598731] x29: ffff8000f568fc70 x28: 0000000000001000 x27: ffff21003db33000 [232066.599030] x26: ffff800005521ae0 x25: ffff0100f98fa3f0 x24: 0000000000000001 [232066.599319] x23: ffff800009920008 x22: ffff21003db33040 x21: ffff21003db33050 [232066.599628] x20: ffff410172fe9e40 x19: ffff410172fe9e00 x18: 0000000000000000 [232066.599914] x17: 0000000000000000 x16: 0000000000000004 x15: 0000000000000000 [232066.600195] x14: 0000000000000000 x13: ffff800008e685a8 x12: 00000000eac0c6e6 [232066.600498] x11: 0000000000000000 x10: 0000000000000008 x9 : ffff8000054e5828 [232066.600784] x8 : 00000000ffffffbf x7 : 0000000000000001 x6 : 000000000a9eb14a [232066.601062] x5 : 0000000000000000 x4 : ffff70ff8a14a800 x3 : 0000000000000058 [232066.601348] x2 : 0000000000000001 x1 : 54dce46366daa6c6 x0 : 0000000000000000 [232066.601636] Call trace: [232066.601749] nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.601998] nfs4_do_reclaim+0x1b8/0x28c [nfsv4] [232066.602218] nfs4_state_manager+0x928/0x10f0 [nfsv4] [232066.602455] nfs4_run_state_manager+0x78/0x1b0 [nfsv4] [232066.602690] kthread+0x110/0x114 [232066.602830] ret_from_fork+0x10/0x20 [232066.602985] Code: 1400000d f9403f20 f9402e61 91016003 (f9402c00) [232066.603284] SMP: stopping secondary CPUs [232066.606936] Starting crashdump kernel... [232066.607146] Bye! Analysing the vmcore, we know that nfs4_copy_state listed by destination nfs_server->ss_copies was added by the field copies in handle_async_copy(), and we found a waiting copy process with the stack as: PID: 3511963 TASK: ffff710028b47e00 CPU: 0 COMMAND: "cp" #0 [ffff8001116ef740] __switch_to at ffff8000081b92f4 #1 [ffff8001116ef760] __schedule at ffff800008dd0650 #2 [ffff8001116ef7c0] schedule at ffff800008dd0a00 #3 [ffff8001116ef7e0] schedule_timeout at ffff800008dd6aa0 #4 [ffff8001116ef860] __wait_for_common at ffff800008dd166c #5 [ffff8001116ef8e0] wait_for_completion_interruptible at ffff800008dd1898 #6 [ffff8001116ef8f0] handle_async_copy at ffff8000055142f4 [nfsv4] #7 [ffff8001116ef970] _nfs42_proc_copy at ffff8000055147c8 [nfsv4] #8 [ffff8001116efa80] nfs42_proc_copy at ffff800005514cf0 [nfsv4] #9 [ffff8001116efc50] __nfs4_copy_file_range.constprop.0 at ffff8000054ed694 [nfsv4] The NULL-pointer dereference was due to nfs42_complete_copies() listed the nfs_server->ss_copies by the field ss_copies of nfs4_copy_state. So the nfs4_copy_state address ffff0100f98fa3f0 was offset by 0x10 and the data accessed through this pointer was also incorrect. Generally, the ordered list nfs4_state_owner->so_states indicate open(O_RDWR) or open(O_WRITE) states are reclaimed firstly by nfs4_reclaim_open_state(). When destination state reclaim is failed with NFS_STATE_RECOVERY_FAILED and copies are not deleted in nfs_server->ss_copies, the source state may be passed to the nfs42_complete_copies() process earlier, resulting in this crash scene finally. To solve this issue, we add a list_head nfs_server->ss_src_copies for a server-to-server copy specially. Fixes: 0e65a32 ("NFS: handle source server reboot") Signed-off-by: Yanjun Zhang <[email protected]> Reviewed-by: Trond Myklebust <[email protected]> Signed-off-by: Anna Schumaker <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…ation commit c728a95 upstream. When testing the XDP_REDIRECT function on the LS1028A platform, we found a very reproducible issue that the Tx frames can no longer be sent out even if XDP_REDIRECT is turned off. Specifically, if there is a lot of traffic on Rx direction, when XDP_REDIRECT is turned on, the console may display some warnings like "timeout for tx ring #6 clear", and all redirected frames will be dropped, the detailed log is as follows. root@ls1028ardb:~# ./xdp-bench redirect eno0 eno2 Redirecting from eno0 (ifindex 3; driver fsl_enetc) to eno2 (ifindex 4; driver fsl_enetc) [203.849809] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #5 clear [204.006051] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear [204.161944] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #7 clear eno0->eno2 1420505 rx/s 1420590 err,drop/s 0 xmit/s xmit eno0->eno2 0 xmit/s 1420590 drop/s 0 drv_err/s 15.71 bulk-avg eno0->eno2 1420484 rx/s 1420485 err,drop/s 0 xmit/s xmit eno0->eno2 0 xmit/s 1420485 drop/s 0 drv_err/s 15.71 bulk-avg By analyzing the XDP_REDIRECT implementation of enetc driver, the driver will reconfigure Tx and Rx BD rings when a bpf program is installed or uninstalled, but there is no mechanisms to block the redirected frames when enetc driver reconfigures rings. Similarly, XDP_TX verdicts on received frames can also lead to frames being enqueued in the Tx rings. Because XDP ignores the state set by the netif_tx_wake_queue() API, so introduce the ENETC_TX_DOWN flag to suppress transmission of XDP frames. Fixes: c33bfaf ("net: enetc: set up XDP program under enetc_reconfigure()") Cc: [email protected] Signed-off-by: Wei Fang <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 0a93f2c upstream. The Tx BD rings are disabled first in enetc_stop() and the driver waits for them to become empty. This operation is not safe while the ring is actively transmitting frames, and will cause the ring to not be empty and hardware exception. As described in the NETC block guide, software should only disable an active Tx ring after all pending ring entries have been consumed (i.e. when PI = CI). Disabling a transmit ring that is actively processing BDs risks a HW-SW race hazard whereby a hardware resource becomes assigned to work on one or more ring entries only to have those entries be removed due to the ring becoming disabled. When testing XDP_REDIRECT feautre, although all frames were blocked from being put into Tx rings during ring reconfiguration, the similar warning log was still encountered: fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #7 clear The reason is that when there are still unsent frames in the Tx ring, disabling the Tx ring causes the remaining frames to be unable to be sent out. And the Tx ring cannot be restored, which means that even if the xdp program is uninstalled, the Tx frames cannot be sent out anymore. Therefore, correct the operation order in enect_start() and enect_stop(). Fixes: ff58fda ("net: enetc: prioritize ability to go down over packet processing") Cc: [email protected] Signed-off-by: Wei Fang <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 3d04139 upstream. Syzkaller reported a lockdep splat: ============================================ WARNING: possible recursive locking detected 6.11.0-rc6-syzkaller-00019-g67784a74e258 #0 Not tainted -------------------------------------------- syz-executor364/5113 is trying to acquire lock: ffff8880449f1958 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff8880449f1958 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 but task is already holding lock: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(k-slock-AF_INET); lock(k-slock-AF_INET); *** DEADLOCK *** May be due to missing lock nesting notation 7 locks held by syz-executor364/5113: #0: ffff8880449f0e18 (sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1607 [inline] #0: ffff8880449f0e18 (sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg+0x153/0x1b10 net/mptcp/protocol.c:1806 #1: ffff88803fe39ad8 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1607 [inline] #1: ffff88803fe39ad8 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg_fastopen+0x11f/0x530 net/mptcp/protocol.c:1727 #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x5f/0x1b80 net/ipv4/ip_output.c:470 #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x45f/0x1390 net/ipv4/ip_output.c:228 #4: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: local_lock_acquire include/linux/local_lock_internal.h:29 [inline] #4: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x33b/0x15b0 net/core/dev.c:6104 #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0x230/0x5f0 net/ipv4/ip_input.c:232 #6: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] #6: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 stack backtrace: CPU: 0 UID: 0 PID: 5113 Comm: syz-executor364 Not tainted 6.11.0-rc6-syzkaller-00019-g67784a74e258 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 check_deadlock kernel/locking/lockdep.c:3061 [inline] validate_chain+0x15d3/0x5900 kernel/locking/lockdep.c:3855 __lock_acquire+0x137a/0x2040 kernel/locking/lockdep.c:5142 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5759 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 mptcp_sk_clone_init+0x32/0x13c0 net/mptcp/protocol.c:3279 subflow_syn_recv_sock+0x931/0x1920 net/mptcp/subflow.c:874 tcp_check_req+0xfe4/0x1a20 net/ipv4/tcp_minisocks.c:853 tcp_v4_rcv+0x1c3e/0x37f0 net/ipv4/tcp_ipv4.c:2267 ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x2bf/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6108 __napi_poll+0xcb/0x490 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6963 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 do_softirq+0x11b/0x1e0 kernel/softirq.c:455 </IRQ> <TASK> __local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:908 [inline] __dev_queue_xmit+0x1763/0x3e90 net/core/dev.c:4450 dev_queue_xmit include/linux/netdevice.h:3105 [inline] neigh_hh_output include/net/neighbour.h:526 [inline] neigh_output include/net/neighbour.h:540 [inline] ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:235 ip_local_out net/ipv4/ip_output.c:129 [inline] __ip_queue_xmit+0x118c/0x1b80 net/ipv4/ip_output.c:535 __tcp_transmit_skb+0x2544/0x3b30 net/ipv4/tcp_output.c:1466 tcp_rcv_synsent_state_process net/ipv4/tcp_input.c:6542 [inline] tcp_rcv_state_process+0x2c32/0x4570 net/ipv4/tcp_input.c:6729 tcp_v4_do_rcv+0x77d/0xc70 net/ipv4/tcp_ipv4.c:1934 sk_backlog_rcv include/net/sock.h:1111 [inline] __release_sock+0x214/0x350 net/core/sock.c:3004 release_sock+0x61/0x1f0 net/core/sock.c:3558 mptcp_sendmsg_fastopen+0x1ad/0x530 net/mptcp/protocol.c:1733 mptcp_sendmsg+0x1884/0x1b10 net/mptcp/protocol.c:1812 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmmsg+0x3b2/0x740 net/socket.c:2737 __do_sys_sendmmsg net/socket.c:2766 [inline] __se_sys_sendmmsg net/socket.c:2763 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2763 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f04fb13a6b9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 01 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd651f42d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f04fb13a6b9 RDX: 0000000000000001 RSI: 0000000020000d00 RDI: 0000000000000004 RBP: 00007ffd651f4310 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000020000080 R11: 0000000000000246 R12: 00000000000f4240 R13: 00007f04fb187449 R14: 00007ffd651f42f4 R15: 00007ffd651f4300 </TASK> As noted by Cong Wang, the splat is false positive, but the code path leading to the report is an unexpected one: a client is attempting an MPC handshake towards the in-kernel listener created by the in-kernel PM for a port based signal endpoint. Such connection will be never accepted; many of them can make the listener queue full and preventing the creation of MPJ subflow via such listener - its intended role. Explicitly detect this scenario at initial-syn time and drop the incoming MPC request. Fixes: 1729cf1 ("mptcp: create the listening socket for new port") Cc: [email protected] Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=f4aacdfef2c6a6529c3e Cc: Cong Wang <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Matthieu Baerts (NGI0) <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> [ Conflicts in mib.[ch], because commit 6982826 ("mptcp: fallback to TCP after SYN+MPC drops"), and commit 27069e7 ("mptcp: disable active MPTCP in case of blackhole") are linked to new features, not available in this version. Resolving the conflicts is easy, simply adding the new lines declaring the new "endpoint attempt" MIB entry. ] Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit ac01c8c upstream. AddressSanitizer found a use-after-free bug in the symbol code which manifested as 'perf top' segfaulting. ==1238389==ERROR: AddressSanitizer: heap-use-after-free on address 0x60b00c48844b at pc 0x5650d8035961 bp 0x7f751aaecc90 sp 0x7f751aaecc80 READ of size 1 at 0x60b00c48844b thread T193 #0 0x5650d8035960 in _sort__sym_cmp util/sort.c:310 #1 0x5650d8043744 in hist_entry__cmp util/hist.c:1286 #2 0x5650d8043951 in hists__findnew_entry util/hist.c:614 #3 0x5650d804568f in __hists__add_entry util/hist.c:754 AsahiLinux#4 0x5650d8045bf9 in hists__add_entry util/hist.c:772 AsahiLinux#5 0x5650d8045df1 in iter_add_single_normal_entry util/hist.c:997 AsahiLinux#6 0x5650d8043326 in hist_entry_iter__add util/hist.c:1242 AsahiLinux#7 0x5650d7ceeefe in perf_event__process_sample /home/matt/src/linux/tools/perf/builtin-top.c:845 AsahiLinux#8 0x5650d7ceeefe in deliver_event /home/matt/src/linux/tools/perf/builtin-top.c:1208 AsahiLinux#9 0x5650d7fdb51b in do_flush util/ordered-events.c:245 AsahiLinux#10 0x5650d7fdb51b in __ordered_events__flush util/ordered-events.c:324 AsahiLinux#11 0x5650d7ced743 in process_thread /home/matt/src/linux/tools/perf/builtin-top.c:1120 AsahiLinux#12 0x7f757ef1f133 in start_thread nptl/pthread_create.c:442 AsahiLinux#13 0x7f757ef9f7db in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 When updating hist maps it's also necessary to update the hist symbol reference because the old one gets freed in map__put(). While this bug was probably introduced with 5c24b67 ("perf tools: Replace map->referenced & maps->removed_maps with map->refcnt"), the symbol objects were leaked until c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") was merged so the bug was masked. Fixes: c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") Reported-by: Yunzhao Li <[email protected]> Signed-off-by: Matt Fleming (Cloudflare) <[email protected]> Cc: Ian Rogers <[email protected]> Cc: [email protected] Cc: Namhyung Kim <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: [email protected] # v5.13+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 9af2efe upstream. The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 #1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 #2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 #3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 AsahiLinux#4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 AsahiLinux#5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 AsahiLinux#6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 AsahiLinux#7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 AsahiLinux#8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 AsahiLinux#9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 AsahiLinux#10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 AsahiLinux#11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 AsahiLinux#12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 AsahiLinux#13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 AsahiLinux#14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 AsahiLinux#15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 AsahiLinux#16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 AsahiLinux#17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c ("perf hist: Update hist symbol when updating maps") Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Matt Fleming <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit cb7e509 ] If ufshcd_rtc_work calls ufshcd_rpm_put_sync() and the pm's usage_count is 0, we will enter the runtime suspend callback. However, the runtime suspend callback will wait to flush ufshcd_rtc_work, causing a deadlock. Replace ufshcd_rpm_put_sync() with ufshcd_rpm_put() to avoid the deadlock. Fixes: 6bf999e ("scsi: ufs: core: Add UFS RTC support") Cc: [email protected] #6.11.x Signed-off-by: Peter Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Bart Van Assche <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

If ufshcd_rtc_work calls ufshcd_rpm_put_sync() and the pm's usage_count is 0, we will enter the runtime suspend callback. However, the runtime suspend callback will wait to flush ufshcd_rtc_work, causing a deadlock. Replace ufshcd_rpm_put_sync() with ufshcd_rpm_put() to avoid the deadlock. Fixes: 6bf999e ("scsi: ufs: core: Add UFS RTC support") Cc: [email protected] #6.11.x Signed-off-by: Peter Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Bart Van Assche <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>

[ Upstream commit 05c200c ] The following handshake mechanism needs be followed after firmware download is completed to bring the firmware to running state. After firmware fragments of Operational image are downloaded and secure sends result of the image succeeds, 1. Driver sends HCI Intel reset with boot option #1 to switch FW image. 2. FW sends Alive GP[0] MSIx 3. Driver enables data path (doorbell 0x460 for RBDs, etc...) 4. Driver gets Bootup event from firmware 5. Driver performs D0 entry to device (WRITE to IPC_Sleep_Control =0x0) 6. FW sends Alive GP[0] MSIx 7. Device host interface is fully set for BT protocol stack operation. 8. Driver may optionally get debug event with ID 0x97 which can be dropped For Intermediate loadger image, all the above steps are applicable expcept #5 and #6. On HCI_OP_RESET, firmware raises alive interrupt. Driver needs to wait for it before passing control over to bluetooth stack. Co-developed-by: Devegowda Chandrashekar <[email protected]> Signed-off-by: Devegowda Chandrashekar <[email protected]> Signed-off-by: Kiran K <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Stable-dep-of: 510e838 ("Bluetooth: btintel: Do no pass vendor events to stack") Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 5858b68 ] Kernel will hang on destroy admin_q while we create ctrl failed, such as following calltrace: PID: 23644 TASK: ff2d52b40f439fc0 CPU: 2 COMMAND: "nvme" #0 [ff61d23de260fb78] __schedule at ffffffff8323bc15 #1 [ff61d23de260fc08] schedule at ffffffff8323c014 AsahiLinux#2 [ff61d23de260fc28] blk_mq_freeze_queue_wait at ffffffff82a3dba1 AsahiLinux#3 [ff61d23de260fc78] blk_freeze_queue at ffffffff82a4113a AsahiLinux#4 [ff61d23de260fc90] blk_cleanup_queue at ffffffff82a33006 AsahiLinux#5 [ff61d23de260fcb0] nvme_rdma_destroy_admin_queue at ffffffffc12686ce AsahiLinux#6 [ff61d23de260fcc8] nvme_rdma_setup_ctrl at ffffffffc1268ced AsahiLinux#7 [ff61d23de260fd28] nvme_rdma_create_ctrl at ffffffffc126919b AsahiLinux#8 [ff61d23de260fd68] nvmf_dev_write at ffffffffc024f362 AsahiLinux#9 [ff61d23de260fe38] vfs_write at ffffffff827d5f25 RIP: 00007fda7891d574 RSP: 00007ffe2ef06958 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 000055e8122a4d90 RCX: 00007fda7891d574 RDX: 000000000000012b RSI: 000055e8122a4d90 RDI: 0000000000000004 RBP: 00007ffe2ef079c0 R8: 000000000000012b R9: 000055e8122a4d90 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000004 R13: 000055e8122923c0 R14: 000000000000012b R15: 00007fda78a54500 ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b This due to we have quiesced admi_q before cancel requests, but forgot to unquiesce before destroy it, as a result we fail to drain the pending requests, and hang on blk_mq_freeze_queue_wait() forever. Here try to reuse nvme_rdma_teardown_admin_queue() to fix this issue and simplify the code. Fixes: 958dc1d ("nvme-rdma: add clean action for failed reconnection") Reported-by: Yingfu.zhou <[email protected]> Signed-off-by: Chunguang.xu <[email protected]> Signed-off-by: Yue.zhao <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Keith Busch <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 7f45ed5 upstream. When the power mode change is successful but the power mode hasn't actually changed, the post notification was missed. Similar to the approach with hibernate/clock scale/hce enable, having pre/post notifications in the same function will make it easier to maintain. Additionally, supplement the description of power parameters for the pwr_change_notify callback. Fixes: 7eb584d ("ufs: refactor configuring power mode") Cc: [email protected] AsahiLinux#6.11.x Signed-off-by: Peter Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Bart Van Assche <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 88a6e2f ] Its used from trace__run(), for the 'perf trace' live mode, i.e. its strace-like, non-perf.data file processing mode, the most common one. The trace__run() function will set trace->host using machine__new_host() that is supposed to give a machine instance representing the running machine, and since we'll use perf_env__arch_strerrno() to get the right errno -> string table, we need to use machine->env, so initialize it in machine__new_host(). Before the patch: (gdb) run trace --errno-summary -a sleep 1 <SNIP> Summary of events: gvfs-afc-volume (3187), 2 events, 0.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ pselect6 1 0 0.000 0.000 0.000 0.000 0.00% GUsbEventThread (3519), 2 events, 0.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ poll 1 0 0.000 0.000 0.000 0.000 0.00% <SNIP> Program received signal SIGSEGV, Segmentation fault. 0x00000000005caba0 in perf_env__arch_strerrno (env=0x0, err=110) at util/env.c:478 478 if (env->arch_strerrno == NULL) (gdb) bt #0 0x00000000005caba0 in perf_env__arch_strerrno (env=0x0, err=110) at util/env.c:478 #1 0x00000000004b75d2 in thread__dump_stats (ttrace=0x14f58f0, trace=0x7fffffffa5b0, fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>) at builtin-trace.c:4673 AsahiLinux#2 0x00000000004b78bf in trace__fprintf_thread (fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>, thread=0x10fa0b0, trace=0x7fffffffa5b0) at builtin-trace.c:4708 AsahiLinux#3 0x00000000004b7ad9 in trace__fprintf_thread_summary (trace=0x7fffffffa5b0, fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>) at builtin-trace.c:4747 AsahiLinux#4 0x00000000004b656e in trace__run (trace=0x7fffffffa5b0, argc=2, argv=0x7fffffffde60) at builtin-trace.c:4456 AsahiLinux#5 0x00000000004ba43e in cmd_trace (argc=2, argv=0x7fffffffde60) at builtin-trace.c:5487 AsahiLinux#6 0x00000000004c0414 in run_builtin (p=0xec3068 <commands+648>, argc=5, argv=0x7fffffffde60) at perf.c:351 AsahiLinux#7 0x00000000004c06bb in handle_internal_command (argc=5, argv=0x7fffffffde60) at perf.c:404 AsahiLinux#8 0x00000000004c0814 in run_argv (argcp=0x7fffffffdc4c, argv=0x7fffffffdc40) at perf.c:448 AsahiLinux#9 0x00000000004c0b5d in main (argc=5, argv=0x7fffffffde60) at perf.c:560 (gdb) After: root@number:~# perf trace -a --errno-summary sleep 1 <SNIP> pw-data-loop (2685), 1410 events, 16.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ epoll_wait 188 0 983.428 0.000 5.231 15.595 8.68% ioctl 94 0 0.811 0.004 0.009 0.016 2.82% read 188 0 0.322 0.001 0.002 0.006 5.15% write 141 0 0.280 0.001 0.002 0.018 8.39% timerfd_settime 94 0 0.138 0.001 0.001 0.007 6.47% gnome-control-c (179406), 1848 events, 20.9% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ poll 222 0 959.577 0.000 4.322 21.414 11.40% recvmsg 150 0 0.539 0.001 0.004 0.013 5.12% write 300 0 0.442 0.001 0.001 0.007 3.29% read 150 0 0.183 0.001 0.001 0.009 5.53% getpid 102 0 0.101 0.000 0.001 0.008 7.82% root@number:~# Fixes: 54373b5 ("perf env: Introduce perf_env__arch_strerrno()") Reported-by: Veronika Molnarova <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Veronika Molnarova <[email protected]> Acked-by: Michael Petlan <[email protected]> Tested-by: Michael Petlan <[email protected]> Link: https://lore.kernel.org/r/Z0XffUgNSv_9OjOi@x1 Signed-off-by: Namhyung Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

svenpeter42 added 3 commits August 9, 2021 20:12

irqchip/apple-aic: fix irq_disable from within irq handlers

1d07aca

Signed-off-by: Sven Peter <[email protected]>

mailbox WIP

90737b3

svenpeter42 marked this pull request as draft August 9, 2021 18:55

svenpeter42 closed this Aug 21, 2021

svenpeter42 deleted the mailbox-wip branch September 7, 2021 15:01

asahilina pushed a commit that referenced this pull request Aug 17, 2022

Merge pull request #6 from Rust-for-Linux/cstr-improvement

7f60ab1

Backport CStr improvement to remove need for a nightly feature

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Mailbox WIP to discuss how we will implement RTKit #6

Mailbox WIP to discuss how we will implement RTKit #6

svenpeter42 commented Aug 9, 2021 •

edited

Loading

alyssarosenzweig commented Aug 9, 2021

pipcet commented Aug 9, 2021

svenpeter42 commented Aug 9, 2021 •

edited

Loading

pipcet commented Aug 10, 2021

Mailbox WIP to discuss how we will implement RTKit #6

Mailbox WIP to discuss how we will implement RTKit #6

Conversation

svenpeter42 commented Aug 9, 2021 • edited Loading

alyssarosenzweig commented Aug 9, 2021

pipcet commented Aug 9, 2021

svenpeter42 commented Aug 9, 2021 • edited Loading

pipcet commented Aug 10, 2021

svenpeter42 commented Aug 9, 2021 •

edited

Loading

svenpeter42 commented Aug 9, 2021 •

edited

Loading