-
-
Notifications
You must be signed in to change notification settings - Fork 673
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Improve reflow performance and general memory usage by reducing size of TerminalCharacter #3043
Conversation
next_lines is always consolidated to a single Row, which immediately gets removed - we can remove some dead code as a result
Given a 1MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~9s to ~3s
Given a 10MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~23s to ~20s
See zellij-org#2182 for original introduction that only added it in one branch, this fixes an issue where the saved cursor was incorrectly reset when the real cursor was
Previously if a 20 character line were split into two 10 character lines, the cursor would be placed on the line after the two lines. New characters would then be treated as a new canonical line. This commit fixes this by biasing cursors to the end of the previous line.
With a 10MB single line catted into a fresh terminal, VmRSS goes from 964092 kB to 874020 kB (as reported by /proc/<pid>/status) before/after this patch Given a 10MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~15s to ~12.5s
With a 10MB single line catted into a fresh terminal, VmRSS goes from 845156 kB to 478396 kB (as reported by /proc/<pid>/status) before/after this patch Given a 10MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~12.5s to ~7s
c9386eb
to
a8fcff5
Compare
This reduces TerminalCharacter from 24 to 16 bytes With a 10MB single line catted into a fresh terminal, VmRSS goes from 478396 kB to 398108 kB (as reported by /proc/<pid>/status) before/after this patch Given a 10MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~7s to ~4.75s
reset_all is only used from ansi params, and ansi params don't control link anchor
The original condition checked absolute_x_index was in bounds, then used the index to manipulate it. This is equivalent to getting a ref to the character at that position and manipulating directly
a8fcff5
to
a0731c2
Compare
Someone please merge this. I am suffering Y~Y Edit: Since this repo doesn't have a Nix flake -- for any NixOS users interested, here's an standalone overlay to compile this against upstream nixpkgs: (self: super: {
zellij = super.zellij.overrideAttrs (fAttrs: pAttrs: (let
name = "zellij";
owner = "aidanhs";
repo = name;
rev = "aphs-improve-reflow-perf-2";
hash = "sha256-vIF17qMNmUCJ432KTzZoSoV2dCNCRv9WqvAVp4TLOjU=";
depHash = "sha256-RGQe0fSnNYCDBhJ5pGbm7TPSoRa9x60NlGo3rgTJD6Y=";
src = self.fetchFromGitHub {
inherit owner repo rev hash;
};
cargoDeps = pAttrs.cargoDeps.overrideAttrs (lib.const {
name = "${name}-vendor.tar.gz";
inherit src;
outputHash = depHash;
});
in {
inherit src cargoDeps;
}));
}) |
* rust-toolchain: Bump toolchain version to 1.69.0 which, compared to the previous 1.67.0, has the following impacts on `zellij`: - [Turn off debuginfo for build deps][2]: Increases build time (on my machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected* This version also changes [handling of the `default-features` flag][3] when specifying dependencies in `Cargo.toml`. If a dependent crate requires `default-features = true` on a crate that is required as `default-features = false` further up the dependency tree, the `true` setting "wins". We only specify `default-features = false` for three crates total: - `names`: This is used only by us - `surf`: This is used only by us - `vte`: This is also required by `strip-ansi-escapes`, but that has `default-features = false` as well How this affects our transitive dependencies is unknown at this point. [2]: rust-lang/cargo#11252 [3]: rust-lang/cargo#11409 * rust-toolchain: Bump toolchain version to 1.70.0 which, compared to the previous 1.69.0, as the following impacts on `zellij`: 1. [Enable sparse registry checkout for crates.io by default][1] This drastically increases the time to first build on a fresh rust installation/a rust installation with a clean cargo registry cache. Previously it took about 75s to populate the deps/cache (with `cargo fetch --locked` and ~100 MBit/s network), whereas now the same process takes ~10 s. 2. [The `OnceCell` type is now part of std][2] In theory, this would allow us to cut a dependency from `zellij-utils`, but the `once_cell` crate is pulled in by another 16 deps, so there's no point in attempting it right now. Build times and binary sizes are unaffected by this change compared to the previous 1.69.0 toolchain. [1]: rust-lang/cargo#11791 [2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html * rust-toolchain: Bump toolchain version to 1.75.0 which, compared to the previous 1.70.0, has the following impacts on `zellij`: 1. [cross-crate inlining][8] This should increase application performance, as functions can now be inlined across crates. 2. [`async fn` in traits][9] This would allow us to drop the `async_trait` dependency, but it is currently still required by 3 other dependencies. Build time in debug mode (on my own PC) is cut down from 256s to 189s (for a clean build). Build time in release mode is cut down from 473s to 391s (for a clean build). Binary sizes only change minimally (825 MB -> 807 MB in debug, 29 MB -> 30 MB in release). [8]: rust-lang/rust#116505 [9]: rust-lang/rust#115822 * chore: Apply rustfmt. * CHANGELOG: Add PR zellij-org#3039.
…control plugins from the command line (zellij-org#3066) * prototype - working with message from the cli * prototype - pipe from the CLI to plugins * prototype - pipe from the CLI to plugins and back again * prototype - working with better cli interface * prototype - working after removing unused stuff * prototype - working with launching plugin if it is not launched, also fixed event ordering * refactor: change message to cli-message * prototype - allow plugins to send messages to each other * fix: allow cli messages to send plugin parameters (and implement backpressure) * fix: use input_pipe_id to identify cli pipes instead of their message name * fix: come cleanups and add skip_cache parameter * fix: pipe/client-server communication robustness * fix: leaking messages between plugins while loading * feat: allow plugins to specify how a new plugin instance is launched when sending messages * fix: add permissions * refactor: adjust cli api * fix: improve cli plugin loading error messages * docs: cli pipe * fix: take plugin configuration into account when messaging between plugins * refactor: pipe message protobuf interface * refactor: update(event) -> pipe * refactor - rename CliMessage to CliPipe * fix: add is_private to pipes and change some naming * refactor - cli client * refactor: various cleanups * style(fmt): rustfmt * fix(pipes): backpressure across multiple plugins * style: some cleanups * style(fmt): rustfmt * style: fix merge conflict mistake * style(wording): clarify pipe permission
* xtask: Add `--no-push` flag to `publish` which can be used when simulating releases to work without a writable git fork of the zellij code. * xtask: Fix borrow issues * xtask/pipe: Require lockfile in publish to avoid errors from invalid dependency versions. * CHANGELOG: Add PR zellij-org#3040.
…3032) * refactor: Simplify transfer_rows_from_viewport_to_lines_above next_lines is always consolidated to a single Row, which immediately gets removed - we can remove some dead code as a result * perf: Batch remove rows from the viewport for performance Given a 1MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~9s to ~3s * perf: Optimize Row::drain_until by splitting chars in one step Given a 10MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~23s to ~20s * refactor: Simplify `if let` into a `.map` * refactor: There are only new saved coordinates when there were old ones * refactor: Unify viewport transfer: use common variable names * fix: Use same saved cursor logic in height resize as width See zellij-org#2182 for original introduction that only added it in one branch, this fixes an issue where the saved cursor was incorrectly reset when the real cursor was * fix: Correct saved+real cursor calculations when reflowing long lines * fix: Don't create canonical lines if cursor ends on EOL after resize Previously if a 20 character line were split into two 10 character lines, the cursor would be placed on the line after the two lines. New characters would then be treated as a new canonical line. This commit fixes this by biasing cursors to the end of the previous line. * fix: for cursor index calculation in lines that are already wrapped * chore: test for real/saved cursor position being handled separately * chore: Apply cargo format * chore(repo): update issue templates * Bump rust version to 1.75.0 (zellij-org#3039) * rust-toolchain: Bump toolchain version to 1.69.0 which, compared to the previous 1.67.0, has the following impacts on `zellij`: - [Turn off debuginfo for build deps][2]: Increases build time (on my machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected* This version also changes [handling of the `default-features` flag][3] when specifying dependencies in `Cargo.toml`. If a dependent crate requires `default-features = true` on a crate that is required as `default-features = false` further up the dependency tree, the `true` setting "wins". We only specify `default-features = false` for three crates total: - `names`: This is used only by us - `surf`: This is used only by us - `vte`: This is also required by `strip-ansi-escapes`, but that has `default-features = false` as well How this affects our transitive dependencies is unknown at this point. [2]: rust-lang/cargo#11252 [3]: rust-lang/cargo#11409 * rust-toolchain: Bump toolchain version to 1.70.0 which, compared to the previous 1.69.0, as the following impacts on `zellij`: 1. [Enable sparse registry checkout for crates.io by default][1] This drastically increases the time to first build on a fresh rust installation/a rust installation with a clean cargo registry cache. Previously it took about 75s to populate the deps/cache (with `cargo fetch --locked` and ~100 MBit/s network), whereas now the same process takes ~10 s. 2. [The `OnceCell` type is now part of std][2] In theory, this would allow us to cut a dependency from `zellij-utils`, but the `once_cell` crate is pulled in by another 16 deps, so there's no point in attempting it right now. Build times and binary sizes are unaffected by this change compared to the previous 1.69.0 toolchain. [1]: rust-lang/cargo#11791 [2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html * rust-toolchain: Bump toolchain version to 1.75.0 which, compared to the previous 1.70.0, has the following impacts on `zellij`: 1. [cross-crate inlining][8] This should increase application performance, as functions can now be inlined across crates. 2. [`async fn` in traits][9] This would allow us to drop the `async_trait` dependency, but it is currently still required by 3 other dependencies. Build time in debug mode (on my own PC) is cut down from 256s to 189s (for a clean build). Build time in release mode is cut down from 473s to 391s (for a clean build). Binary sizes only change minimally (825 MB -> 807 MB in debug, 29 MB -> 30 MB in release). [8]: rust-lang/rust#116505 [9]: rust-lang/rust#115822 * chore: Apply rustfmt. * CHANGELOG: Add PR zellij-org#3039. * feat(plugins): introduce 'pipes', allowing users to pipe data to and control plugins from the command line (zellij-org#3066) * prototype - working with message from the cli * prototype - pipe from the CLI to plugins * prototype - pipe from the CLI to plugins and back again * prototype - working with better cli interface * prototype - working after removing unused stuff * prototype - working with launching plugin if it is not launched, also fixed event ordering * refactor: change message to cli-message * prototype - allow plugins to send messages to each other * fix: allow cli messages to send plugin parameters (and implement backpressure) * fix: use input_pipe_id to identify cli pipes instead of their message name * fix: come cleanups and add skip_cache parameter * fix: pipe/client-server communication robustness * fix: leaking messages between plugins while loading * feat: allow plugins to specify how a new plugin instance is launched when sending messages * fix: add permissions * refactor: adjust cli api * fix: improve cli plugin loading error messages * docs: cli pipe * fix: take plugin configuration into account when messaging between plugins * refactor: pipe message protobuf interface * refactor: update(event) -> pipe * refactor - rename CliMessage to CliPipe * fix: add is_private to pipes and change some naming * refactor - cli client * refactor: various cleanups * style(fmt): rustfmt * fix(pipes): backpressure across multiple plugins * style: some cleanups * style(fmt): rustfmt * style: fix merge conflict mistake * style(wording): clarify pipe permission * docs(changelog): introduce pipes * fix: add some robustness and future proofing * fix e2e tests --------- Co-authored-by: Aram Drevekenin <[email protected]> Co-authored-by: har7an <[email protected]>
Hey @aidanhs - I'm now merging this third and final PR in the series. I wanted to thank you for your hard and excellent work on this. I changed some minor stuff (namely making sure integers don't overflow in some edge cases as well as removing the hard-coded This PR series solved some ingrained problem in an ancient part of the code base, improved our resource utilization and boosted our performance significantly. It also had the upshot of teaching me some really nice tricks in Rust which I was unaware of before :) Also - thanks for the conditional compilation of our protobuf assets - that will certainly improve the development experience in this repository! Cheers, and thanks again. |
@imsnif a huge thanks to you for your quick turnaround on the multiple PRs! I know that new contributors dropping big contributions can be disruptive, especially if the changes 1) aren't quite in line with a roadmap, 2) are complex and 3) haven't been discussed beforehand! So it's hugely appreciated (and a huge credit to you) that you've got through these so quickly, and it's very motivating if I want to contribute in the future. I'll put some notes in the linked issue #2622 about the progress that's been made. |
Praise be, aidanhs's salvation is upon us. 🙏 |
… reducing size of TerminalCharacter (zellij-org#3043) * refactor: Simplify transfer_rows_from_viewport_to_lines_above next_lines is always consolidated to a single Row, which immediately gets removed - we can remove some dead code as a result * perf: Batch remove rows from the viewport for performance Given a 1MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~9s to ~3s * perf: Optimize Row::drain_until by splitting chars in one step Given a 10MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~23s to ~20s * refactor: Simplify `if let` into a `.map` * refactor: There are only new saved coordinates when there were old ones * refactor: Unify viewport transfer: use common variable names * fix: Use same saved cursor logic in height resize as width See zellij-org#2182 for original introduction that only added it in one branch, this fixes an issue where the saved cursor was incorrectly reset when the real cursor was * fix: Correct saved+real cursor calculations when reflowing long lines * fix: Don't create canonical lines if cursor ends on EOL after resize Previously if a 20 character line were split into two 10 character lines, the cursor would be placed on the line after the two lines. New characters would then be treated as a new canonical line. This commit fixes this by biasing cursors to the end of the previous line. * fix: for cursor index calculation in lines that are already wrapped * chore: test for real/saved cursor position being handled separately * chore: Apply cargo format * refactor: Unify viewport transfer: transfer + cursor update together * perf: Reduce size of TerminalCharacter from 72 to 60 bytes With a 10MB single line catted into a fresh terminal, VmRSS goes from 964092 kB to 874020 kB (as reported by /proc/<pid>/status) before/after this patch Given a 10MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~15s to ~12.5s * fix(build): Don't unconditionally rebuild zellij-utils * refactor: Remove Copy impl on TerminalCharacter * perf: Rc styles to reduce TerminalCharacter from 60 to 24 bytes With a 10MB single line catted into a fresh terminal, VmRSS goes from 845156 kB to 478396 kB (as reported by /proc/<pid>/status) before/after this patch Given a 10MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~12.5s to ~7s * perf: Remove RcCharacterStyles::Default, allow enum niche optimisation This reduces TerminalCharacter from 24 to 16 bytes With a 10MB single line catted into a fresh terminal, VmRSS goes from 478396 kB to 398108 kB (as reported by /proc/<pid>/status) before/after this patch Given a 10MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~7s to ~4.75s * docs: link anchor omission from reset_all is deliberate reset_all is only used from ansi params, and ansi params don't control link anchor * fix: Remove no-op on variable that gets immediately dropped * refactor: Simplify replace_character_at logic The original condition checked absolute_x_index was in bounds, then used the index to manipulate it. This is equivalent to getting a ref to the character at that position and manipulating directly * chore: Run xtask format * chore(repo): update issue templates * Bump rust version to 1.75.0 (zellij-org#3039) * rust-toolchain: Bump toolchain version to 1.69.0 which, compared to the previous 1.67.0, has the following impacts on `zellij`: - [Turn off debuginfo for build deps][2]: Increases build time (on my machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected* This version also changes [handling of the `default-features` flag][3] when specifying dependencies in `Cargo.toml`. If a dependent crate requires `default-features = true` on a crate that is required as `default-features = false` further up the dependency tree, the `true` setting "wins". We only specify `default-features = false` for three crates total: - `names`: This is used only by us - `surf`: This is used only by us - `vte`: This is also required by `strip-ansi-escapes`, but that has `default-features = false` as well How this affects our transitive dependencies is unknown at this point. [2]: rust-lang/cargo#11252 [3]: rust-lang/cargo#11409 * rust-toolchain: Bump toolchain version to 1.70.0 which, compared to the previous 1.69.0, as the following impacts on `zellij`: 1. [Enable sparse registry checkout for crates.io by default][1] This drastically increases the time to first build on a fresh rust installation/a rust installation with a clean cargo registry cache. Previously it took about 75s to populate the deps/cache (with `cargo fetch --locked` and ~100 MBit/s network), whereas now the same process takes ~10 s. 2. [The `OnceCell` type is now part of std][2] In theory, this would allow us to cut a dependency from `zellij-utils`, but the `once_cell` crate is pulled in by another 16 deps, so there's no point in attempting it right now. Build times and binary sizes are unaffected by this change compared to the previous 1.69.0 toolchain. [1]: rust-lang/cargo#11791 [2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html * rust-toolchain: Bump toolchain version to 1.75.0 which, compared to the previous 1.70.0, has the following impacts on `zellij`: 1. [cross-crate inlining][8] This should increase application performance, as functions can now be inlined across crates. 2. [`async fn` in traits][9] This would allow us to drop the `async_trait` dependency, but it is currently still required by 3 other dependencies. Build time in debug mode (on my own PC) is cut down from 256s to 189s (for a clean build). Build time in release mode is cut down from 473s to 391s (for a clean build). Binary sizes only change minimally (825 MB -> 807 MB in debug, 29 MB -> 30 MB in release). [8]: rust-lang/rust#116505 [9]: rust-lang/rust#115822 * chore: Apply rustfmt. * CHANGELOG: Add PR zellij-org#3039. * feat(plugins): introduce 'pipes', allowing users to pipe data to and control plugins from the command line (zellij-org#3066) * prototype - working with message from the cli * prototype - pipe from the CLI to plugins * prototype - pipe from the CLI to plugins and back again * prototype - working with better cli interface * prototype - working after removing unused stuff * prototype - working with launching plugin if it is not launched, also fixed event ordering * refactor: change message to cli-message * prototype - allow plugins to send messages to each other * fix: allow cli messages to send plugin parameters (and implement backpressure) * fix: use input_pipe_id to identify cli pipes instead of their message name * fix: come cleanups and add skip_cache parameter * fix: pipe/client-server communication robustness * fix: leaking messages between plugins while loading * feat: allow plugins to specify how a new plugin instance is launched when sending messages * fix: add permissions * refactor: adjust cli api * fix: improve cli plugin loading error messages * docs: cli pipe * fix: take plugin configuration into account when messaging between plugins * refactor: pipe message protobuf interface * refactor: update(event) -> pipe * refactor - rename CliMessage to CliPipe * fix: add is_private to pipes and change some naming * refactor - cli client * refactor: various cleanups * style(fmt): rustfmt * fix(pipes): backpressure across multiple plugins * style: some cleanups * style(fmt): rustfmt * style: fix merge conflict mistake * style(wording): clarify pipe permission * docs(changelog): introduce pipes * xtask: Disable pusing during publish (zellij-org#3040) * xtask: Add `--no-push` flag to `publish` which can be used when simulating releases to work without a writable git fork of the zellij code. * xtask: Fix borrow issues * xtask/pipe: Require lockfile in publish to avoid errors from invalid dependency versions. * CHANGELOG: Add PR zellij-org#3040. * fix(terminal): some real/saved cursor bugs during resize (zellij-org#3032) * refactor: Simplify transfer_rows_from_viewport_to_lines_above next_lines is always consolidated to a single Row, which immediately gets removed - we can remove some dead code as a result * perf: Batch remove rows from the viewport for performance Given a 1MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~9s to ~3s * perf: Optimize Row::drain_until by splitting chars in one step Given a 10MB line catted into the terminal, a toggle-fullscreen + toggle-fullscreen + close-pane + `run true` goes from ~23s to ~20s * refactor: Simplify `if let` into a `.map` * refactor: There are only new saved coordinates when there were old ones * refactor: Unify viewport transfer: use common variable names * fix: Use same saved cursor logic in height resize as width See zellij-org#2182 for original introduction that only added it in one branch, this fixes an issue where the saved cursor was incorrectly reset when the real cursor was * fix: Correct saved+real cursor calculations when reflowing long lines * fix: Don't create canonical lines if cursor ends on EOL after resize Previously if a 20 character line were split into two 10 character lines, the cursor would be placed on the line after the two lines. New characters would then be treated as a new canonical line. This commit fixes this by biasing cursors to the end of the previous line. * fix: for cursor index calculation in lines that are already wrapped * chore: test for real/saved cursor position being handled separately * chore: Apply cargo format * chore(repo): update issue templates * Bump rust version to 1.75.0 (zellij-org#3039) * rust-toolchain: Bump toolchain version to 1.69.0 which, compared to the previous 1.67.0, has the following impacts on `zellij`: - [Turn off debuginfo for build deps][2]: Increases build time (on my machine) from ~230 s in 1.67.0 to ~250 s now, *which is unexpected* This version also changes [handling of the `default-features` flag][3] when specifying dependencies in `Cargo.toml`. If a dependent crate requires `default-features = true` on a crate that is required as `default-features = false` further up the dependency tree, the `true` setting "wins". We only specify `default-features = false` for three crates total: - `names`: This is used only by us - `surf`: This is used only by us - `vte`: This is also required by `strip-ansi-escapes`, but that has `default-features = false` as well How this affects our transitive dependencies is unknown at this point. [2]: rust-lang/cargo#11252 [3]: rust-lang/cargo#11409 * rust-toolchain: Bump toolchain version to 1.70.0 which, compared to the previous 1.69.0, as the following impacts on `zellij`: 1. [Enable sparse registry checkout for crates.io by default][1] This drastically increases the time to first build on a fresh rust installation/a rust installation with a clean cargo registry cache. Previously it took about 75s to populate the deps/cache (with `cargo fetch --locked` and ~100 MBit/s network), whereas now the same process takes ~10 s. 2. [The `OnceCell` type is now part of std][2] In theory, this would allow us to cut a dependency from `zellij-utils`, but the `once_cell` crate is pulled in by another 16 deps, so there's no point in attempting it right now. Build times and binary sizes are unaffected by this change compared to the previous 1.69.0 toolchain. [1]: rust-lang/cargo#11791 [2]: https://doc.rust-lang.org/stable/std/cell/struct.OnceCell.html * rust-toolchain: Bump toolchain version to 1.75.0 which, compared to the previous 1.70.0, has the following impacts on `zellij`: 1. [cross-crate inlining][8] This should increase application performance, as functions can now be inlined across crates. 2. [`async fn` in traits][9] This would allow us to drop the `async_trait` dependency, but it is currently still required by 3 other dependencies. Build time in debug mode (on my own PC) is cut down from 256s to 189s (for a clean build). Build time in release mode is cut down from 473s to 391s (for a clean build). Binary sizes only change minimally (825 MB -> 807 MB in debug, 29 MB -> 30 MB in release). [8]: rust-lang/rust#116505 [9]: rust-lang/rust#115822 * chore: Apply rustfmt. * CHANGELOG: Add PR zellij-org#3039. * feat(plugins): introduce 'pipes', allowing users to pipe data to and control plugins from the command line (zellij-org#3066) * prototype - working with message from the cli * prototype - pipe from the CLI to plugins * prototype - pipe from the CLI to plugins and back again * prototype - working with better cli interface * prototype - working after removing unused stuff * prototype - working with launching plugin if it is not launched, also fixed event ordering * refactor: change message to cli-message * prototype - allow plugins to send messages to each other * fix: allow cli messages to send plugin parameters (and implement backpressure) * fix: use input_pipe_id to identify cli pipes instead of their message name * fix: come cleanups and add skip_cache parameter * fix: pipe/client-server communication robustness * fix: leaking messages between plugins while loading * feat: allow plugins to specify how a new plugin instance is launched when sending messages * fix: add permissions * refactor: adjust cli api * fix: improve cli plugin loading error messages * docs: cli pipe * fix: take plugin configuration into account when messaging between plugins * refactor: pipe message protobuf interface * refactor: update(event) -> pipe * refactor - rename CliMessage to CliPipe * fix: add is_private to pipes and change some naming * refactor - cli client * refactor: various cleanups * style(fmt): rustfmt * fix(pipes): backpressure across multiple plugins * style: some cleanups * style(fmt): rustfmt * style: fix merge conflict mistake * style(wording): clarify pipe permission * docs(changelog): introduce pipes * fix: add some robustness and future proofing * fix e2e tests --------- Co-authored-by: Aram Drevekenin <[email protected]> Co-authored-by: har7an <[email protected]> * fix integer overflow again (oops) --------- Co-authored-by: Aram Drevekenin <[email protected]> Co-authored-by: har7an <[email protected]>
cc #2622
This PR probably moves zellij to 'good enough for me' that it won't completely lock up on long lines.
Third in a series: #3045, #3032, #3043 (this pr)
This PR builds on the first+second and contains all commits from them - it will be easier to review after merge of the of them both.
There is a refactor (enabled by the previous PR in the series) to merge the two separate branches (
new_columns != self.width
+new_height != self.height
) for viewport transfer.The primary optimisation pursued here is in reducing the size of TerminalCharacter so the memory copies performed when reflowing are much cheaper. This also has the nice side effect of reducing overall memory usage.
I also added a few minor cleanups I noticed, and made zellij-utils stop unconditionally rebuilding.
I highly recommend reviewing these changes commit-by-commit, as I've carefully tried to make each one standalone and self-consistent.