sturgeon: fix usb #1
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
z3ntu
reviewed
Feb 8, 2022
| qcom,fast-charge-safe-voltage = <4350000>; | ||
| qcom,fast-charge-high-threshold-voltage = <4350000>; | ||
| qcom,auto-recharge-threshold-voltage = <4240000>; | ||
| qcom,minimum-input-voltage = <4450000>; |
There was a problem hiding this comment.
Did you validate that these values are like in downstream?
There was a problem hiding this comment.
I think its https://github.com/timbz/android-kernel-msm-sturgeon/blob/android-msm-sturgeon-3.10-nougat-dr1-wear/arch/arm/boot/dts/apq8026-sturgeon/apq8026-sturgeon-pm.dtsi#L84 but i am not 100% sure how they map. can take a look?
There was a problem hiding this comment.
This should be the correct values
qcom,fast-charge-safe-voltage = <4370000>;
qcom,fast-charge-high-threshold-voltage = <4350000>;
qcom,minimum-input-voltage = <4370000>;
qcom,fast-charge-current-limit = <300000>;
qcom,fast-charge-safe-current = <600000>;
qcom,auto-recharge-threshold-voltage = <4250000>;
Please also post dmesg with these values, smbb prints some extra values with this branch
There was a problem hiding this comment.
Done
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.16.0-rc1 (pmos@focal-fossa) (armv7-alpine-linux-musleabihf-gcc (Alpine 11.2.1_git20220117) 11.2.1 20220117, GNU ld (GNU Binutils) 2.38) #60 SMP PREEMPT Sat Feb 12 10:15:13 UTC 2022
[ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Huawei Watch
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 64 MiB at 0x1c000000
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000002ffffff]
[ 0.000000] node 0: [mem 0x0000000003000000-0x00000000030fffff]
[ 0.000000] node 0: [mem 0x0000000003100000-0x000000000dbfffff]
[ 0.000000] node 0: [mem 0x000000000dc00000-0x000000000f4fffff]
[ 0.000000] node 0: [mem 0x000000000f500000-0x000000001fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
[ 0.000000] percpu: Embedded 15 pages/cpu s32716 r8192 d20532 u61440
[ 0.000000] pcpu-alloc: s32716 r8192 d20532 u61440 alloc=15*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: androidboot.hardware=sturgeon user_debug=31 maxcpus=4 msm_rtb.filter=0x3F pm_levels.sleep_disabled=1 selinux=0 androidboot.emmc=true androidboot.serialno=FFS7N15909000664 androidboot.baseband=apq mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_auo_rm69080_hvga_video androidboot.emmcid=ca9a1002 androidboot.bootloader=STURGEONV4.4
[ 0.000000] Unknown kernel command line parameters "user_debug=31 selinux=0", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 406896K/524288K available (11264K kernel code, 1562K rwdata, 4292K rodata, 1024K init, 257K bss, 51856K reserved, 65536K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x514/0x69c with crng_init=0
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000023] Switching to timer-based delay loop, resolution 52ns
[ 0.000188] Console: colour dummy device 80x30
[ 0.000895] printk: console [tty0] enabled
[ 0.000939] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000984] pid_max: default: 32768 minimum: 301
[ 0.001116] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.001157] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.001877] CPU: Testing write buffer coherency: ok
[ 0.002124] missing device node for CPU 0
[ 0.002153] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002821] Setting up static identity map for 0x300000 - 0x300060
[ 0.002960] rcu: Hierarchical SRCU implementation.
[ 0.003427] smp: Bringing up secondary CPUs ...
[ 0.003456] smp: Brought up 1 node, 1 CPU
[ 0.003479] SMP: Total of 1 processors activated (38.40 BogoMIPS).
[ 0.003505] CPU: All CPU(s) started in SVC mode.
[ 0.003923] devtmpfs: initialized
[ 0.008834] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
[ 0.009079] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.009127] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[ 0.012106] pinctrl core: initialized pinctrl subsystem
[ 0.013325] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.014890] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.016279] thermal_sys: Registered thermal governor 'step_wise'
[ 0.016420] cpuidle: using governor menu
[ 0.016598] NET: Registered PF_QIPCRTR protocol family
[ 0.016812] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.016851] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.040647] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.042158] iommu: Default domain type: Translated
[ 0.042189] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.042418] vgaarb: loaded
[ 0.042852] SCSI subsystem initialized
[ 0.043061] libata version 3.00 loaded.
[ 0.043326] usbcore: registered new interface driver usbfs
[ 0.043406] usbcore: registered new interface driver hub
[ 0.043470] usbcore: registered new device driver usb
[ 0.043612] mc: Linux media interface: v0.10
[ 0.043668] videodev: Linux video capture interface: v2.00
[ 0.044007] qcom_scm: convention: smc legacy
[ 0.044501] Advanced Linux Sound Architecture Driver Initialized.
[ 0.045086] Bluetooth: Core ver 2.22
[ 0.045148] NET: Registered PF_BLUETOOTH protocol family
[ 0.045172] Bluetooth: HCI device and connection manager initialized
[ 0.045203] Bluetooth: HCI socket layer initialized
[ 0.045230] Bluetooth: L2CAP socket layer initialized
[ 0.045280] Bluetooth: SCO socket layer initialized
[ 0.045847] clocksource: Switched to clocksource arch_sys_counter
[ 0.132328] NET: Registered PF_INET protocol family
[ 0.132552] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.133391] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.133457] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.133537] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.133635] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.133737] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.133791] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.133984] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.134470] RPC: Registered named UNIX socket transport module.
[ 0.134505] RPC: Registered udp transport module.
[ 0.134526] RPC: Registered tcp transport module.
[ 0.134545] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.145881] PCI: CLS 0 bytes, default 64
[ 0.147039] Initialise system trusted keyrings
[ 0.147305] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.153057] Trying to unpack rootfs image as initramfs...
[ 0.166400] NFS: Registering the id_resolver key type
[ 0.166463] Key type id_resolver registered
[ 0.166485] Key type id_legacy registered
[ 0.176279] Key type cifs.idmap registered
[ 0.176319] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.176669] fuse: init (API version 7.35)
[ 0.338928] Freeing initrd memory: 1220K
[ 0.458929] Key type asymmetric registered
[ 0.458959] Asymmetric key parser 'x509' registered
[ 0.459166] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.459201] io scheduler mq-deadline registered
[ 0.459223] io scheduler kyber registered
[ 0.477575] msm_serial: driver initialized
[ 0.497950] brd: module loaded
[ 0.509237] loop: module loaded
[ 0.549771] SCSI Media Changer driver v0.25
[ 0.550563] spmi spmi-0: PMIC arbiter version v1 (0x20000002)
[ 0.554525] libphy: Fixed MDIO Bus: probed
[ 0.555274] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 0.555312] CSLIP: code copyright 1989 Regents of the University of California.
[ 0.555383] usbcore: registered new interface driver ax88179_178a
[ 0.555447] usbcore: registered new interface driver cdc_ether
[ 0.555508] usbcore: registered new interface driver net1080
[ 0.555568] usbcore: registered new interface driver cdc_subset
[ 0.555648] usbcore: registered new interface driver cdc_ncm
[ 0.566240] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.566271] ehci-pci: EHCI PCI platform driver
[ 0.566388] usbcore: registered new interface driver cdc_acm
[ 0.566416] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.567195] UDC core: couldn't find an available UDC - added [g_ether] to list of pending drivers
[ 0.567948] input: pm8941_pwrkey as /devices/platform/soc/fc4cf000.spmi/spmi-0/0-00/fc4cf000.spmi:pm8226@0:pwrkey@800/input/input0
[ 0.569099] i2c_dev: i2c /dev entries driver
[ 0.569320] i2c_qup f9927000.i2c:
[ 0.569320] tx channel not available
[ 0.570547] qcom-smbb fc4cf000.spmi:pm8226@0:charger@1000: Initializing SMBB rev 1
[ 0.570604] qcom-smbb fc4cf000.spmi:pm8226@0:charger@1000: qcom,fast-charge-safe-current <= 600000
[ 0.570638] qcom-smbb fc4cf000.spmi:pm8226@0:charger@1000: qcom,fast-charge-current-limit <= 300000
[ 0.570660] qcom-smbb fc4cf000.spmi:pm8226@0:charger@1000: usb-charge-current-limit => 1500000
[ 0.570682] qcom-smbb fc4cf000.spmi:pm8226@0:charger@1000: qcom,dc-current-limit => 1500000
[ 0.570706] qcom-smbb fc4cf000.spmi:pm8226@0:charger@1000: qcom,fast-charge-safe-voltage <= 4370000
[ 0.570738] qcom-smbb fc4cf000.spmi:pm8226@0:charger@1000: qcom,fast-charge-high-threshold-voltage <= 4350000
[ 0.570763] qcom-smbb fc4cf000.spmi:pm8226@0:charger@1000: qcom,fast-charge-low-threshold-voltage => 3200000
[ 0.570786] qcom-smbb fc4cf000.spmi:pm8226@0:charger@1000: qcom,auto-recharge-threshold-voltage inaccurate, rounded to 4240000
[ 0.570827] qcom-smbb fc4cf000.spmi:pm8226@0:charger@1000: qcom,auto-recharge-threshold-voltage <= 4240000
[ 0.570850] qcom-smbb fc4cf000.spmi:pm8226@0:charger@1000: qcom,minimum-input-voltage inaccurate, rounded to 4350000
[ 0.570886] qcom-smbb fc4cf000.spmi:pm8226@0:charger@1000: qcom,minimum-input-voltage <= 4350000
[ 0.572120] qcom-smbb fc4cf000.spmi:pm8226@0:charger@1000: status = 000
[ 0.576104] qcom-smbb fc4cf000.spmi:pm8226@0:charger@1000: status = 000
[ 0.576401] qcom-smbb fc4cf000.spmi:pm8226@0:charger@1000: status = 000
[ 0.586322] qcom-smbb fc4cf000.spmi:pm8226@0:charger@1000: status = 018
[ 0.586640] qcom-smbb fc4cf000.spmi:pm8226@0:charger@1000: status = 018
[ 0.586962] qcom-smbb fc4cf000.spmi:pm8226@0:charger@1000: status = 019
[ 0.587379] qcom-smbb fc4cf000.spmi:pm8226@0:charger@1000: status = 019
[ 0.588781] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: [email protected]
[ 0.589079] sdhci: Secure Digital Host Controller Interface driver
[ 0.589106] sdhci: Copyright(c) Pierre Ossman
[ 0.589125] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.589613] usbcore: registered new interface driver usbhid
[ 0.589642] usbhid: USB HID core driver
[ 0.590721] SPI driver bmp280 has no spi_device_id for bosch,bmp085
[ 0.591863] NET: Registered PF_PACKET protocol family
[ 0.591978] Key type dns_resolver registered
[ 0.592154] Registering SWP/SWPB emulation handler
[ 0.592380] Loading compiled-in X.509 certificates
[ 0.737227] qcom_q6v5_pas adsp-pil: deferred probe timeout, ignoring dependency
[ 0.737283] qcom_q6v5_pas: probe of adsp-pil failed with error -110
[ 0.739022] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 0.742358] s1: Bringing 0uV into 500000-500000uV
[ 0.743020] s3: Bringing 0uV into 1200000-1200000uV
[ 0.743369] s4: Bringing 0uV into 1800000-1800000uV
[ 0.743732] s5: Bringing 0uV into 1150000-1150000uV
[ 0.744084] l1: Bringing 0uV into 1225000-1225000uV
[ 0.744437] l2: Bringing 0uV into 1200000-1200000uV
[ 0.744785] l3: Bringing 0uV into 750000-750000uV
[ 0.745145] l4: Bringing 0uV into 1200000-1200000uV
[ 0.745510] l5: Bringing 0uV into 1200000-1200000uV
[ 0.758250] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 0.758430] l6: Bringing 0uV into 1800000-1800000uV
[ 0.758826] l7: Bringing 0uV into 1850000-1850000uV
[ 0.759199] l8: Bringing 0uV into 1800000-1800000uV
[ 0.759570] l9: Bringing 0uV into 2050000-2050000uV
[ 0.759957] l10: Bringing 0uV into 1800000-1800000uV
[ 0.760630] l12: Bringing 0uV into 1800000-1800000uV
[ 0.761307] l14: Bringing 0uV into 2750000-2750000uV
[ 0.761693] l15: Bringing 0uV into 2800000-2800000uV
[ 0.762073] l16: Bringing 0uV into 3000000-3000000uV
[ 0.762470] l17: Bringing 0uV into 2950000-2950000uV
[ 0.762866] l18: Bringing 0uV into 2950000-2950000uV
[ 0.763263] l19: Bringing 0uV into 2850000-2850000uV
[ 0.763659] l20: Bringing 0uV into 3075000-3075000uV
[ 0.764068] l21: Bringing 0uV into 1800000-1800000uV
[ 0.764471] l22: Bringing 0uV into 1800000-1800000uV
[ 0.764874] l23: Bringing 0uV into 1800000-1800000uV
[ 0.765278] l24: Bringing 0uV into 1300000-1300000uV
[ 0.765687] l25: Bringing 0uV into 1775000-1775000uV
[ 0.776147] l26: Bringing 0uV into 1225000-1225000uV
[ 0.776558] l27: Bringing 0uV into 2050000-2050000uV
[ 0.776962] l28: Bringing 0uV into 1800000-1800000uV
[ 0.779009] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 0.779059] cfg80211: failed to load regulatory.db
[ 0.795958] rmi4_i2c 0-0020: rmi_set_page: set page failed: -6.
[ 0.795992] rmi4_i2c 0-0020: Failed to set page select to 0
[ 0.807474] using random self ethernet address
[ 0.807507] using random host ethernet address
[ 0.808055] usb0: HOST MAC 16:e4:66:c0:e7:18
[ 0.808115] usb0: MAC 02:90:c3:29:72:fd
[ 0.808158] using random self ethernet address
[ 0.808183] using random host ethernet address
[ 0.808276] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[ 0.808306] g_ether gadget: g_ether ready
[ 0.808747] l20: voltage operation not allowed
[ 0.845873] mmc0: SDHCI controller on f9824900.sdhci [f9824900.sdhci] using ADMA
[ 0.950871] mmc0: new HS200 MMC card at address 0001
[ 0.956184] mmcblk0: mmc0:0001 H4G2a 3.64 GiB
[ 0.959660] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26
[ 0.964126] mmcblk0boot0: mmc0:0001 H4G2a 4.00 MiB
[ 0.967420] mmcblk0boot1: mmc0:0001 H4G2a 4.00 MiB
[ 0.977232] mmcblk0rpmb: mmc0:0001 H4G2a 4.00 MiB, chardev (245:0)
[ 1.230005] ALSA device list:
[ 1.230041] No soundcards found.
[ 1.231889] Freeing unused kernel image (initmem) memory: 1024K
[ 1.256163] Run /init as init process
[ 1.256190] with arguments:
[ 1.256196] /init
[ 1.256202] with environment:
[ 1.256207] HOME=/
[ 1.256214] TERM=linux
[ 1.256219] user_debug=31
[ 1.256225] selinux=0
[ 1.494360] random: fast init done
[ 2.029892] qcom-smbb fc4cf000.spmi:pm8226@0:charger@1000: status = 099
[ 23.693798] using random self ethernet address
[ 23.693848] using random host ethernet address
[ 23.706984] UDC core: couldn't find an available UDC or it's busy: -16
There was a problem hiding this comment.
Looks fine, but please take in these two updated values
qcom,auto-recharge-threshold-voltage = <4240000>;
qcom,minimum-input-voltage = <4350000>;
You can see in the dmesg the driver rounded them so let's just provide it with already-rounded values
timbz
force-pushed
the
qcom-msm8226-5.16.y
branch
2 times, most recently
from
088c048 to
97fa422
Compare
Signed-off-by: Timon Baetz <[email protected]>
Signed-off-by: Timon Baetz <[email protected]>
timbz
force-pushed
the
qcom-msm8226-5.16.y
branch
from
97fa422 to
eca6b20
Compare
|
Thank you! |
z3ntu
pushed a commit
that referenced
this pull request
Feb 16, 2022
Johan reported the below crash with test_bpf on ppc64 e5500: test_bpf: torvalds#296 ALU_END_FROM_LE 64: 0x0123456789abcdef -> 0x67452301 jited:1 Oops: Exception in kernel mode, sig: 4 [#1] BE PAGE_SIZE=4K SMP NR_CPUS=24 QEMU e500 Modules linked in: test_bpf(+) CPU: 0 PID: 76 Comm: insmod Not tainted 5.14.0-03771-g98c2059e008a-dirty #1 NIP: 8000000000061c3c LR: 80000000006dea64 CTR: 8000000000061c18 REGS: c0000000032d3420 TRAP: 0700 Not tainted (5.14.0-03771-g98c2059e008a-dirty) MSR: 0000000080089000 <EE,ME> CR: 88002822 XER: 20000000 IRQMASK: 0 <...> NIP [8000000000061c3c] 0x8000000000061c3c LR [80000000006dea64] .__run_one+0x104/0x17c [test_bpf] Call Trace: .__run_one+0x60/0x17c [test_bpf] (unreliable) .test_bpf_init+0x6a8/0xdc8 [test_bpf] .do_one_initcall+0x6c/0x28c .do_init_module+0x68/0x28c .load_module+0x2460/0x2abc .__do_sys_init_module+0x120/0x18c .system_call_exception+0x110/0x1b8 system_call_common+0xf0/0x210 --- interrupt: c00 at 0x101d0acc <...> ---[ end trace 47b2bf19090bb3d0 ]--- Illegal instruction The illegal instruction turned out to be 'ldbrx' emitted for BPF_FROM_[L|B]E, which was only introduced in ISA v2.06. Guard use of the same and implement an alternative approach for older processors. Fixes: 156d0e2 ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF") Reported-by: Johan Almbladh <[email protected]> Signed-off-by: Naveen N. Rao <[email protected]> Tested-by: Johan Almbladh <[email protected]> Acked-by: Johan Almbladh <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/d1e51c6fdf572062cf3009a751c3406bda01b832.1641468127.git.naveen.n.rao@linux.vnet.ibm.com
z3ntu
pushed a commit
that referenced
this pull request
Feb 16, 2022
arm32 uses software to simulate the instruction replaced
by kprobe. some instructions may be simulated by constructing
assembly functions. therefore, before executing instruction
simulation, it is necessary to construct assembly function
execution environment in C language through binding registers.
after kasan is enabled, the register binding relationship will
be destroyed, resulting in instruction simulation errors and
causing kernel panic.
the kprobe emulate instruction function is distributed in three
files: actions-common.c actions-arm.c actions-thumb.c, so disable
KASAN when compiling these files.
for example, use kprobe insert on cap_capable+20 after kasan
enabled, the cap_capable assembly code is as follows:
<cap_capable>:
e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr}
e1a05000 mov r5, r0
e280006c add r0, r0, torvalds#108 ; 0x6c
e1a04001 mov r4, r1
e1a06002 mov r6, r2
e59fa090 ldr sl, [pc, torvalds#144] ;
ebfc7bf8 bl c03aa4b4 <__asan_load4>
e595706c ldr r7, [r5, torvalds#108] ; 0x6c
e2859014 add r9, r5, torvalds#20
......
The emulate_ldr assembly code after enabling kasan is as follows:
c06f1384 <emulate_ldr>:
e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr}
e282803c add r8, r2, torvalds#60 ; 0x3c
e1a05000 mov r5, r0
e7e37855 ubfx r7, r5, torvalds#16, #4
e1a00008 mov r0, r8
e1a09001 mov r9, r1
e1a04002 mov r4, r2
ebf35462 bl c03c6530 <__asan_load4>
e357000f cmp r7, torvalds#15
e7e36655 ubfx r6, r5, torvalds#12, #4
e205a00f and sl, r5, torvalds#15
0a000001 beq c06f13bc <emulate_ldr+0x38>
e0840107 add r0, r4, r7, lsl #2
ebf3545c bl c03c6530 <__asan_load4>
e084010a add r0, r4, sl, lsl #2
ebf3545a bl c03c6530 <__asan_load4>
e2890010 add r0, r9, torvalds#16
ebf35458 bl c03c6530 <__asan_load4>
e5990010 ldr r0, [r9, torvalds#16]
e12fff30 blx r0
e356000f cm r6, torvalds#15
1a000014 bne c06f1430 <emulate_ldr+0xac>
e1a06000 mov r6, r0
e2840040 add r0, r4, torvalds#64 ; 0x40
......
when running in emulate_ldr to simulate the ldr instruction, panic
occurred, and the log is as follows:
Unable to handle kernel NULL pointer dereference at virtual address
00000090
pgd = ecb46400
[00000090] *pgd=2e0fa003, *pmd=00000000
Internal error: Oops: 206 [#1] SMP ARM
PC is at cap_capable+0x14/0xb0
LR is at emulate_ldr+0x50/0xc0
psr: 600d0293 sp : ecd63af8 ip : 00000004 fp : c0a7c30c
r10: 00000000 r9 : c30897f4 r8 : ecd63cd4
r7 : 0000000f r6 : 0000000a r5 : e59fa090 r4 : ecd63c98
r3 : c06ae294 r2 : 00000000 r1 : b7611300 r0 : bf4ec008
Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user
Control: 32c5387d Table: 2d546400 DAC: 55555555
Process bash (pid: 1643, stack limit = 0xecd60190)
(cap_capable) from (kprobe_handler+0x218/0x340)
(kprobe_handler) from (kprobe_trap_handler+0x24/0x48)
(kprobe_trap_handler) from (do_undefinstr+0x13c/0x364)
(do_undefinstr) from (__und_svc_finish+0x0/0x30)
(__und_svc_finish) from (cap_capable+0x18/0xb0)
(cap_capable) from (cap_vm_enough_memory+0x38/0x48)
(cap_vm_enough_memory) from
(security_vm_enough_memory_mm+0x48/0x6c)
(security_vm_enough_memory_mm) from
(copy_process.constprop.5+0x16b4/0x25c8)
(copy_process.constprop.5) from (_do_fork+0xe8/0x55c)
(_do_fork) from (SyS_clone+0x1c/0x24)
(SyS_clone) from (__sys_trace_return+0x0/0x10)
Code: 0050a0e1 6c0080e2 0140a0e1 0260a0e1 (f801f0e7)
Fixes: 35aa1df ("ARM kprobes: instruction single-stepping support")
Fixes: 4210157 ("ARM: 9017/2: Enable KASan for ARM")
Signed-off-by: huangshaobo <[email protected]>
Acked-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 16, 2022
As reported: [ 256.104522] ====================================================== [ 256.113783] WARNING: possible circular locking dependency detected [ 256.120093] 5.16.0-rc6-yocto-standard+ torvalds#99 Not tainted [ 256.125362] ------------------------------------------------------ [ 256.131673] intel-speed-sel/844 is trying to acquire lock: [ 256.137290] ffffffffc036f0d0 (punit_misc_dev_lock){+.+.}-{3:3}, at: isst_if_open+0x18/0x90 [isst_if_common] [ 256.147171] [ 256.147171] but task is already holding lock: [ 256.153135] ffffffff8ee7cb50 (misc_mtx){+.+.}-{3:3}, at: misc_open+0x2a/0x170 [ 256.160407] [ 256.160407] which lock already depends on the new lock. [ 256.160407] [ 256.168712] [ 256.168712] the existing dependency chain (in reverse order) is: [ 256.176327] [ 256.176327] -> #1 (misc_mtx){+.+.}-{3:3}: [ 256.181946] lock_acquire+0x1e6/0x330 [ 256.186265] __mutex_lock+0x9b/0x9b0 [ 256.190497] mutex_lock_nested+0x1b/0x20 [ 256.195075] misc_register+0x32/0x1a0 [ 256.199390] isst_if_cdev_register+0x65/0x180 [isst_if_common] [ 256.205878] isst_if_probe+0x144/0x16e [isst_if_mmio] ... [ 256.241976] [ 256.241976] -> #0 (punit_misc_dev_lock){+.+.}-{3:3}: [ 256.248552] validate_chain+0xbc6/0x1750 [ 256.253131] __lock_acquire+0x88c/0xc10 [ 256.257618] lock_acquire+0x1e6/0x330 [ 256.261933] __mutex_lock+0x9b/0x9b0 [ 256.266165] mutex_lock_nested+0x1b/0x20 [ 256.270739] isst_if_open+0x18/0x90 [isst_if_common] [ 256.276356] misc_open+0x100/0x170 [ 256.280409] chrdev_open+0xa5/0x1e0 ... The call sequence suggested that misc_device /dev file can be opened before misc device is yet to be registered, which is done only once. Here punit_misc_dev_lock was used as common lock, to protect the registration by multiple ISST HW drivers, one time setup, prevent duplicate registry of misc device and prevent load/unload when device is open. We can split into locks: - One which just prevent duplicate call to misc_register() and one time setup. Also never call again if the misc_register() failed or required one time setup is failed. This lock is not shared with any misc device callbacks. - The other lock protects registry, load and unload of HW drivers. Sequence in isst_if_cdev_register() - Register callbacks under punit_misc_dev_open_lock - Call isst_misc_reg() which registers misc_device on the first registry which is under punit_misc_dev_reg_lock, which is not shared with callbacks. Sequence in isst_if_cdev_unregister Just opposite of isst_if_cdev_register Reported-and-tested-by: Liwei Song <[email protected]> Signed-off-by: Srinivas Pandruvada <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 16, 2022
We encountered a crash in smc_setsockopt() and it is caused by accessing smc->clcsock after clcsock was released. BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 50309 Comm: nginx Kdump: loaded Tainted: G E 5.16.0-rc4+ #53 RIP: 0010:smc_setsockopt+0x59/0x280 [smc] Call Trace: <TASK> __sys_setsockopt+0xfc/0x190 __x64_sys_setsockopt+0x20/0x30 do_syscall_64+0x34/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f16ba83918e </TASK> This patch tries to fix it by holding clcsock_release_lock and checking whether clcsock has already been released before access. In case that a crash of the same reason happens in smc_getsockopt() or smc_switch_to_fallback(), this patch also checkes smc->clcsock in them too. And the caller of smc_switch_to_fallback() will identify whether fallback succeeds according to the return value. Fixes: fd57770 ("net/smc: wait for pending work before clcsock release_sock") Link: https://lore.kernel.org/lkml/[email protected]/T/ Signed-off-by: Wen Gu <[email protected]> Acked-by: Karsten Graul <[email protected]> Signed-off-by: David S. Miller <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 16, 2022
Zero vmcs.HOST_IA32_SYSENTER_ESP when initializing *constant* host state if and only if SYSENTER cannot be used, i.e. the kernel is a 64-bit kernel and is not emulating 32-bit syscalls. As the name suggests, vmx_set_constant_host_state() is intended for state that is *constant*. When SYSENTER is used, SYSENTER_ESP isn't constant because stacks are per-CPU, and the VMCS must be updated whenever the vCPU is migrated to a new CPU. The logic in vmx_vcpu_load_vmcs() doesn't differentiate between "never loaded" and "loaded on a different CPU", i.e. setting SYSENTER_ESP on VMCS load also handles setting correct host state when the VMCS is first loaded. Because a VMCS must be loaded before it is initialized during vCPU RESET, zeroing the field in vmx_set_constant_host_state() obliterates the value that was written when the VMCS was loaded. If the vCPU is run before it is migrated, the subsequent VM-Exit will zero out MSR_IA32_SYSENTER_ESP, leading to a #DF on the next 32-bit syscall. double fault: 0000 [#1] SMP CPU: 0 PID: 990 Comm: stable Not tainted 5.16.0+ torvalds#97 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 EIP: entry_SYSENTER_32+0x0/0xe7 Code: <9c> 50 eb 17 0f 20 d8 a9 00 10 00 00 74 0d 25 ff ef ff ff 0f 22 d8 EAX: 000000a2 EBX: a8d1300c ECX: a8d13014 EDX: 00000000 ESI: a8f87000 EDI: a8d13014 EBP: a8d12fc0 ESP: 00000000 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00210093 CR0: 80050033 CR2: fffffffc CR3: 02c3b000 CR4: 00152e90 Fixes: 6ab8a40 ("KVM: VMX: Avoid to rdmsrl(MSR_IA32_SYSENTER_ESP)") Cc: Lai Jiangshan <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 16, 2022
Paweł Marciniak reports the following crash, observed when clearing the chassis intrusion alarm. BUG: kernel NULL pointer dereference, address: 0000000000000028 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 3 PID: 4815 Comm: bash Tainted: G S 5.16.2-200.fc35.x86_64 #1 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Extreme4, BIOS P2.60A 05/03/2018 RIP: 0010:clear_caseopen+0x5a/0x120 [nct6775] Code: 68 70 e8 e9 32 b1 e3 85 c0 0f 85 d2 00 00 00 48 83 7c 24 ... RSP: 0018:ffffabcb02803dd8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: ffff8e8808192880 RSI: 0000000000000000 RDI: ffff8e87c7509a68 RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000000000a R10: 000000000000000a R11: f000000000000000 R12: 000000000000001f R13: ffff8e87c7509828 R14: ffff8e87c7509a68 R15: ffff8e88494527a0 FS: 00007f4db9151740(0000) GS:ffff8e8ebfec0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 0000000166b66001 CR4: 00000000001706e0 Call Trace: <TASK> kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x10b/0x180 vfs_write+0x209/0x2a0 ksys_write+0x4f/0xc0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae The problem is that the device passed to clear_caseopen() is the hwmon device, not the platform device, and the platform data is not set in the hwmon device. Store the pointer to sio_data in struct nct6775_data and get if from there if needed. Fixes: 2e7b988 ("hwmon: (nct6775) Use superio_*() function pointers in sio_data.") Cc: Denis Pauk <[email protected]> Cc: Bernhard Seibold <[email protected]> Reported-by: Paweł Marciniak <[email protected]> Tested-by: Denis Pauk <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 16, 2022
Call trace seen when creating NPIV ports, only 32 out of 64 show online. stag work was not initialized for vport, hence initialize the stag work. WARNING: CPU: 8 PID: 645 at kernel/workqueue.c:1635 __queue_delayed_work+0x68/0x80 CPU: 8 PID: 645 Comm: kworker/8:1 Kdump: loaded Tainted: G IOE --------- -- 4.18.0-348.el8.x86_64 #1 Hardware name: Dell Inc. PowerEdge MX740c/0177V9, BIOS 2.12.2 07/09/2021 Workqueue: events fc_lport_timeout [libfc] RIP: 0010:__queue_delayed_work+0x68/0x80 Code: 89 b2 88 00 00 00 44 89 82 90 00 00 00 48 01 c8 48 89 42 50 41 81 f8 00 20 00 00 75 1d e9 60 24 07 00 44 89 c7 e9 98 f6 ff ff <0f> 0b eb c5 0f 0b eb a1 0f 0b eb a7 0f 0b eb ac 44 89 c6 e9 40 23 RSP: 0018:ffffae514bc3be40 EFLAGS: 00010006 RAX: ffff8d25d6143750 RBX: 0000000000000202 RCX: 0000000000000002 RDX: ffff8d2e31383748 RSI: ffff8d25c000d600 RDI: ffff8d2e31383788 RBP: ffff8d2e31380de0 R08: 0000000000002000 R09: ffff8d2e31383750 R10: ffffffffc0c957e0 R11: ffff8d2624800000 R12: ffff8d2e31380a58 R13: ffff8d2d915eb000 R14: ffff8d25c499b5c0 R15: ffff8d2e31380e18 FS: 0000000000000000(0000) GS:ffff8d2d1fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055fd0484b8b8 CR3: 00000008ffc10006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: queue_delayed_work_on+0x36/0x40 qedf_elsct_send+0x57/0x60 [qedf] fc_lport_enter_flogi+0x90/0xc0 [libfc] fc_lport_timeout+0xb7/0x140 [libfc] process_one_work+0x1a7/0x360 ? create_worker+0x1a0/0x1a0 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x35/0x40 ---[ end trace 008f00f722f2c2ff ]-- Initialize stag work for all the vports. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: Nilesh Javali <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 16, 2022
Hung task call trace was seen during LOGO processing. [ 974.309060] [0000:00:00.0]:[qedf_eh_device_reset:868]: 1:0:2:0: LUN RESET Issued... [ 974.309065] [0000:00:00.0]:[qedf_initiate_tmf:2422]: tm_flags 0x10 sc_cmd 00000000c16b930f op = 0x2a target_id = 0x2 lun=0 [ 974.309178] [0000:00:00.0]:[qedf_initiate_tmf:2431]: portid=016900 tm_flags =LUN RESET [ 974.309222] [0000:00:00.0]:[qedf_initiate_tmf:2438]: orig io_req = 00000000ec78df8f xid = 0x180 ref_cnt = 1. [ 974.309625] host1: rport 016900: Received LOGO request while in state Ready [ 974.309627] host1: rport 016900: Delete port [ 974.309642] host1: rport 016900: work event 3 [ 974.309644] host1: rport 016900: lld callback ev 3 [ 974.313243] [0000:61:00.2]:[qedf_execute_tmf:2383]:1: fcport is uploading, not executing flush. [ 974.313295] [0000:61:00.2]:[qedf_execute_tmf:2400]:1: task mgmt command success... [ 984.031088] INFO: task jbd2/dm-15-8:7645 blocked for more than 120 seconds. [ 984.031136] Not tainted 4.18.0-305.el8.x86_64 #1 [ 984.031166] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 984.031209] jbd2/dm-15-8 D 0 7645 2 0x80004080 [ 984.031212] Call Trace: [ 984.031222] __schedule+0x2c4/0x700 [ 984.031230] ? unfreeze_partials.isra.83+0x16e/0x1a0 [ 984.031233] ? bit_wait_timeout+0x90/0x90 [ 984.031235] schedule+0x38/0xa0 [ 984.031238] io_schedule+0x12/0x40 [ 984.031240] bit_wait_io+0xd/0x50 [ 984.031243] __wait_on_bit+0x6c/0x80 [ 984.031248] ? free_buffer_head+0x21/0x50 [ 984.031251] out_of_line_wait_on_bit+0x91/0xb0 [ 984.031257] ? init_wait_var_entry+0x50/0x50 [ 984.031268] jbd2_journal_commit_transaction+0x112e/0x19f0 [jbd2] [ 984.031280] kjournald2+0xbd/0x270 [jbd2] [ 984.031284] ? finish_wait+0x80/0x80 [ 984.031291] ? commit_timeout+0x10/0x10 [jbd2] [ 984.031294] kthread+0x116/0x130 [ 984.031300] ? kthread_flush_work_fn+0x10/0x10 [ 984.031305] ret_from_fork+0x1f/0x40 There was a ref count issue when LOGO is received during TMF. This leads to one of the I/Os hanging with the driver. Fix the ref count. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: Nilesh Javali <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 16, 2022
…e_put() The bnx2fc_destroy() functions are removing the interface before calling destroy_work. This results multiple WARNings from sysfs_remove_group() as the controller rport device attributes are removed too early. Replace the fcoe_port's destroy_work queue. It's not needed. The problem is easily reproducible with the following steps. Example: $ dmesg -w & $ systemctl enable --now fcoe $ fipvlan -s -c ens2f1 $ fcoeadm -d ens2f1.802 [ 583.464488] host2: libfc: Link down on port (7500a1) [ 583.472651] bnx2fc: 7500a1 - rport not created Yet!! [ 583.490468] ------------[ cut here ]------------ [ 583.538725] sysfs group 'power' not found for kobject 'rport-2:0-0' [ 583.568814] WARNING: CPU: 3 PID: 192 at fs/sysfs/group.c:279 sysfs_remove_group+0x6f/0x80 [ 583.607130] Modules linked in: dm_service_time 8021q garp mrp stp llc bnx2fc cnic uio rpcsec_gss_krb5 auth_rpcgss nfsv4 ... [ 583.942994] CPU: 3 PID: 192 Comm: kworker/3:2 Kdump: loaded Not tainted 5.14.0-39.el9.x86_64 #1 [ 583.984105] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 [ 584.016535] Workqueue: fc_wq_2 fc_rport_final_delete [scsi_transport_fc] [ 584.050691] RIP: 0010:sysfs_remove_group+0x6f/0x80 [ 584.074725] Code: ff 5b 48 89 ef 5d 41 5c e9 ee c0 ff ff 48 89 ef e8 f6 b8 ff ff eb d1 49 8b 14 24 48 8b 33 48 c7 c7 ... [ 584.162586] RSP: 0018:ffffb567c15afdc0 EFLAGS: 00010282 [ 584.188225] RAX: 0000000000000000 RBX: ffffffff8eec4220 RCX: 0000000000000000 [ 584.221053] RDX: ffff8c1586ce84c0 RSI: ffff8c1586cd7cc0 RDI: ffff8c1586cd7cc0 [ 584.255089] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffb567c15afc00 [ 584.287954] R10: ffffb567c15afbf8 R11: ffffffff8fbe7f28 R12: ffff8c1486326400 [ 584.322356] R13: ffff8c1486326480 R14: ffff8c1483a4a000 R15: 0000000000000004 [ 584.355379] FS: 0000000000000000(0000) GS:ffff8c1586cc0000(0000) knlGS:0000000000000000 [ 584.394419] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 584.421123] CR2: 00007fe95a6f7840 CR3: 0000000107674002 CR4: 00000000000606e0 [ 584.454888] Call Trace: [ 584.466108] device_del+0xb2/0x3e0 [ 584.481701] device_unregister+0x13/0x60 [ 584.501306] bsg_unregister_queue+0x5b/0x80 [ 584.522029] bsg_remove_queue+0x1c/0x40 [ 584.541884] fc_rport_final_delete+0xf3/0x1d0 [scsi_transport_fc] [ 584.573823] process_one_work+0x1e3/0x3b0 [ 584.592396] worker_thread+0x50/0x3b0 [ 584.609256] ? rescuer_thread+0x370/0x370 [ 584.628877] kthread+0x149/0x170 [ 584.643673] ? set_kthread_struct+0x40/0x40 [ 584.662909] ret_from_fork+0x22/0x30 [ 584.680002] ---[ end trace 53575ecefa942ece ]--- Link: https://lore.kernel.org/r/[email protected] Fixes: 0cbf32e ("[SCSI] bnx2fc: Avoid calling bnx2fc_if_destroy with unnecessary locks") Tested-by: Guangwu Zhang <[email protected]> Co-developed-by: Maurizio Lombardi <[email protected]> Signed-off-by: Maurizio Lombardi <[email protected]> Signed-off-by: John Meneghini <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 16, 2022
Crashed at i.mx8qm platform when suspend if enable remote wakeup Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 244 Comm: kworker/u12:6 Not tainted 5.15.5-dirty torvalds#12 Hardware name: Freescale i.MX8QM MEK (DT) Workqueue: events_unbound async_run_entry_fn pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : xhci_disable_hub_port_wake.isra.62+0x60/0xf8 lr : xhci_disable_hub_port_wake.isra.62+0x34/0xf8 sp : ffff80001394bbf0 x29: ffff80001394bbf0 x28: 0000000000000000 x27: ffff00081193b578 x26: ffff00081193b570 x25: 0000000000000000 x24: 0000000000000000 x23: ffff00081193a29c x22: 0000000000020001 x21: 0000000000000001 x20: 0000000000000000 x19: ffff800014e90490 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000002 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000960 x9 : ffff80001394baa0 x8 : ffff0008145d1780 x7 : ffff0008f95b8e80 x6 : 000000001853b453 x5 : 0000000000000496 x4 : 0000000000000000 x3 : ffff00081193a29c x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffff000814591620 Call trace: xhci_disable_hub_port_wake.isra.62+0x60/0xf8 xhci_suspend+0x58/0x510 xhci_plat_suspend+0x50/0x78 platform_pm_suspend+0x2c/0x78 dpm_run_callback.isra.25+0x50/0xe8 __device_suspend+0x108/0x3c0 The basic flow: 1. run time suspend call xhci_suspend, xhci parent devices gate the clock. 2. echo mem >/sys/power/state, system _device_suspend call xhci_suspend 3. xhci_suspend call xhci_disable_hub_port_wake, which access register, but clock already gated by run time suspend. This problem was hidden by power domain driver, which call run time resume before it. But the below commit remove it and make this issue happen. commit c1df456 ("PM: domains: Don't runtime resume devices at genpd_prepare()") This patch call run time resume before suspend to make sure clock is on before access register. Reviewed-by: Peter Chen <[email protected]> Cc: stable <[email protected]> Signed-off-by: Frank Li <[email protected]> Testeb-by: Abel Vesa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 16, 2022
Trond Myklebust reported soft lockups in XFS IO completion such as this: watchdog: BUG: soft lockup - CPU#12 stuck for 23s! [kworker/12:1:3106] CPU: 12 PID: 3106 Comm: kworker/12:1 Not tainted 4.18.0-305.10.2.el8_4.x86_64 #1 Workqueue: xfs-conv/md127 xfs_end_io [xfs] RIP: 0010:_raw_spin_unlock_irqrestore+0x11/0x20 Call Trace: wake_up_page_bit+0x8a/0x110 iomap_finish_ioend+0xd7/0x1c0 iomap_finish_ioends+0x7f/0xb0 xfs_end_ioend+0x6b/0x100 [xfs] xfs_end_io+0xb9/0xe0 [xfs] process_one_work+0x1a7/0x360 worker_thread+0x1fa/0x390 kthread+0x116/0x130 ret_from_fork+0x35/0x40 Ioends are processed as an atomic completion unit when all the chained bios in the ioend have completed their IO. Logically contiguous ioends can also be merged and completed as a single, larger unit. Both of these things can be problematic as both the bio chains per ioend and the size of the merged ioends processed as a single completion are both unbound. If we have a large sequential dirty region in the page cache, write_cache_pages() will keep feeding us sequential pages and we will keep mapping them into ioends and bios until we get a dirty page at a non-sequential file offset. These large sequential runs can will result in bio and ioend chaining to optimise the io patterns. The pages iunder writeback are pinned within these chains until the submission chaining is broken, allowing the entire chain to be completed. This can result in huge chains being processed in IO completion context. We get deep bio chaining if we have large contiguous physical extents. We will keep adding pages to the current bio until it is full, then we'll chain a new bio to keep adding pages for writeback. Hence we can build bio chains that map millions of pages and tens of gigabytes of RAM if the page cache contains big enough contiguous dirty file regions. This long bio chain pins those pages until the final bio in the chain completes and the ioend can iterate all the chained bios and complete them. OTOH, if we have a physically fragmented file, we end up submitting one ioend per physical fragment that each have a small bio or bio chain attached to them. We do not chain these at IO submission time, but instead we chain them at completion time based on file offset via iomap_ioend_try_merge(). Hence we can end up with unbound ioend chains being built via completion merging. XFS can then do COW remapping or unwritten extent conversion on that merged chain, which involves walking an extent fragment at a time and running a transaction to modify the physical extent information. IOWs, we merge all the discontiguous ioends together into a contiguous file range, only to then process them individually as discontiguous extents. This extent manipulation is computationally expensive and can run in a tight loop, so merging logically contiguous but physically discontigous ioends gains us nothing except for hiding the fact the fact we broke the ioends up into individual physical extents at submission and then need to loop over those individual physical extents at completion. Hence we need to have mechanisms to limit ioend sizes and to break up completion processing of large merged ioend chains: 1. bio chains per ioend need to be bound in length. Pure overwrites go straight to iomap_finish_ioend() in softirq context with the exact bio chain attached to the ioend by submission. Hence the only way to prevent long holdoffs here is to bound ioend submission sizes because we can't reschedule in softirq context. 2. iomap_finish_ioends() has to handle unbound merged ioend chains correctly. This relies on any one call to iomap_finish_ioend() being bound in runtime so that cond_resched() can be issued regularly as the long ioend chain is processed. i.e. this relies on mechanism #1 to limit individual ioend sizes to work correctly. 3. filesystems have to loop over the merged ioends to process physical extent manipulations. This means they can loop internally, and so we break merging at physical extent boundaries so the filesystem can easily insert reschedule points between individual extent manipulations. Signed-off-by: Dave Chinner <[email protected]> Reported-and-tested-by: Trond Myklebust <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 16, 2022
Fix the following false positive warning: ============================= WARNING: suspicious RCU usage 5.16.0-rc4+ torvalds#57 Not tainted ----------------------------- arch/x86/kvm/../../../virt/kvm/eventfd.c:484 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by fc_vcpu 0/330: #0: ffff8884835fc0b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x88/0x6f0 [kvm] #1: ffffc90004c0bb68 (&kvm->srcu){....}-{0:0}, at: vcpu_enter_guest+0x600/0x1860 [kvm] #2: ffffc90004c0c1d0 (&kvm->irq_srcu){....}-{0:0}, at: kvm_notify_acked_irq+0x36/0x180 [kvm] stack backtrace: CPU: 26 PID: 330 Comm: fc_vcpu 0 Not tainted 5.16.0-rc4+ Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x44/0x57 kvm_notify_acked_gsi+0x6b/0x70 [kvm] kvm_notify_acked_irq+0x8d/0x180 [kvm] kvm_ioapic_update_eoi+0x92/0x240 [kvm] kvm_apic_set_eoi_accelerated+0x2a/0xe0 [kvm] handle_apic_eoi_induced+0x3d/0x60 [kvm_intel] vmx_handle_exit+0x19c/0x6a0 [kvm_intel] vcpu_enter_guest+0x66e/0x1860 [kvm] kvm_arch_vcpu_ioctl_run+0x438/0x7f0 [kvm] kvm_vcpu_ioctl+0x38a/0x6f0 [kvm] __x64_sys_ioctl+0x89/0xc0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Since kvm_unregister_irq_ack_notifier() does synchronize_srcu(&kvm->irq_srcu), kvm->irq_ack_notifier_list is protected by kvm->irq_srcu. In fact, kvm->irq_srcu SRCU read lock is held in kvm_notify_acked_irq(), making it a false positive warning. So use hlist_for_each_entry_srcu() instead of hlist_for_each_entry_rcu(). Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Hou Wenlong <[email protected]> Message-Id: <f98bac4f5052bad2c26df9ad50f7019e40434512.1643265976.git.houwenlong.hwl@antgroup.com> Signed-off-by: Paolo Bonzini <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 16, 2022
…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.17, take #1 - Correctly update the shadow register on exception injection when running in nVHE mode - Correctly use the mm_ops indirection when performing cache invalidation from the page-table walker - Restrict the vgic-v3 workaround for SEIS to the two known broken implementations
z3ntu
pushed a commit
that referenced
this pull request
Feb 16, 2022
An early failure in hfi1_ipoib_setup_rn() can lead to the following panic: BUG: unable to handle kernel NULL pointer dereference at 00000000000001b0 PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI Workqueue: events work_for_cpu_fn RIP: 0010:try_to_grab_pending+0x2b/0x140 Code: 1f 44 00 00 41 55 41 54 55 48 89 d5 53 48 89 fb 9c 58 0f 1f 44 00 00 48 89 c2 fa 66 0f 1f 44 00 00 48 89 55 00 40 84 f6 75 77 <f0> 48 0f ba 2b 00 72 09 31 c0 5b 5d 41 5c 41 5d c3 48 89 df e8 6c RSP: 0018:ffffb6b3cf7cfa48 EFLAGS: 00010046 RAX: 0000000000000246 RBX: 00000000000001b0 RCX: 0000000000000000 RDX: 0000000000000246 RSI: 0000000000000000 RDI: 00000000000001b0 RBP: ffffb6b3cf7cfa70 R08: 0000000000000f09 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: ffffb6b3cf7cfa90 R14: ffffffff9b2fbfc0 R15: ffff8a4fdf244690 FS: 0000000000000000(0000) GS:ffff8a527f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000001b0 CR3: 00000017e2410003 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __cancel_work_timer+0x42/0x190 ? dev_printk_emit+0x4e/0x70 iowait_cancel_work+0x15/0x30 [hfi1] hfi1_ipoib_txreq_deinit+0x5a/0x220 [hfi1] ? dev_err+0x6c/0x90 hfi1_ipoib_netdev_dtor+0x15/0x30 [hfi1] hfi1_ipoib_setup_rn+0x10e/0x150 [hfi1] rdma_init_netdev+0x5a/0x80 [ib_core] ? hfi1_ipoib_free_rdma_netdev+0x20/0x20 [hfi1] ipoib_intf_init+0x6c/0x350 [ib_ipoib] ipoib_intf_alloc+0x5c/0xc0 [ib_ipoib] ipoib_add_one+0xbe/0x300 [ib_ipoib] add_client_context+0x12c/0x1a0 [ib_core] enable_device_and_get+0xdc/0x1d0 [ib_core] ib_register_device+0x572/0x6b0 [ib_core] rvt_register_device+0x11b/0x220 [rdmavt] hfi1_register_ib_device+0x6b4/0x770 [hfi1] do_init_one.isra.20+0x3e3/0x680 [hfi1] local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 ? create_worker+0x1a0/0x1a0 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x1f/0x40 The panic happens in hfi1_ipoib_txreq_deinit() because there is a NULL deref when hfi1_ipoib_netdev_dtor() is called in this error case. hfi1_ipoib_txreq_init() and hfi1_ipoib_rxq_init() are self unwinding so fix by adjusting the error paths accordingly. Other changes: - hfi1_ipoib_free_rdma_netdev() is deleted including the free_netdev() since the netdev core code deletes calls free_netdev() - The switch to the accelerated entrances is moved to the success path. Cc: [email protected] Fixes: d99dc60 ("IB/hfi1: Add functions to transmit datagram ipoib packets") Link: https://lore.kernel.org/r/1642287756-182313-4-git-send-email-mike.marciniszyn@cornelisnetworks.com Reviewed-by: Dennis Dalessandro <[email protected]> Signed-off-by: Mike Marciniszyn <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 16, 2022
There are two issues with runtime pm handling in stmmac_dvr_remove(): 1. the mac is runtime suspended before stopping dma and rx/tx. We need to ensure the device is properly resumed back. 2. the stmmaceth clk enable/disable isn't balanced in both exit and error handling code path. Take the exit code path for example, when we unbind the driver or rmmod the driver module, the mac is runtime suspended as said above, so the stmmaceth clk is disabled, but stmmac_dvr_remove() stmmac_remove_config_dt() clk_disable_unprepare() CCF will complain this time. The error handling code path suffers from the similar situtaion. Here are kernel warnings in error handling code path on Allwinner D1 platform: [ 1.604695] ------------[ cut here ]------------ [ 1.609328] bus-emac already disabled [ 1.613015] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:952 clk_core_disable+0xcc/0xec [ 1.621039] CPU: 0 PID: 38 Comm: kworker/u2:1 Not tainted 5.14.0-rc4#1 [ 1.627653] Hardware name: Allwinner D1 NeZha (DT) [ 1.632443] Workqueue: events_unbound deferred_probe_work_func [ 1.638286] epc : clk_core_disable+0xcc/0xec [ 1.642561] ra : clk_core_disable+0xcc/0xec [ 1.646835] epc : ffffffff8023c2ec ra : ffffffff8023c2ec sp : ffffffd00411bb10 [ 1.654054] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : ffffffff80ed6a6f [ 1.661272] t1 : ffffffff80ed6a60 t2 : 0000000000000000 s0 : ffffffe001509e00 [ 1.668489] s1 : 0000000000000001 a0 : 0000000000000019 a1 : ffffffff80e80bd8 [ 1.675707] a2 : 00000000ffffefff a3 : 00000000000000f4 a4 : 0000000000000002 [ 1.682924] a5 : 0000000000000001 a6 : 0000000000000030 a7 : 00000000028f5c29 [ 1.690141] s2 : 0000000000000800 s3 : ffffffe001375000 s4 : ffffffe01fdf7a80 [ 1.697358] s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff [ 1.704577] s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000 [ 1.711794] s11: ffffffe001b80760 t3 : 0000000000000062 t4 : ffffffffffffffff [ 1.719012] t5 : ffffffff80e0f6d8 t6 : ffffffd00411b8f0 [ 1.724321] status: 8000000201800100 badaddr: 0000000000000000 cause: 0000000000000003 [ 1.732233] [<ffffffff8023c2ec>] clk_core_disable+0xcc/0xec [ 1.737810] [<ffffffff80240430>] clk_disable+0x38/0x78 [ 1.742956] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8 [ 1.748451] [<ffffffff8031a500>] stmmac_remove_config_dt+0x1c/0x4c [ 1.754646] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c [ 1.760484] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8 [ 1.765975] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0 [ 1.771382] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c [ 1.777305] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148 [ 1.783402] [<ffffffff8029873c>] driver_probe_device+0x38/0x138 [ 1.789324] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170 [ 1.795508] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0 [ 1.802125] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4 [ 1.807701] [<ffffffff80298d1c>] __device_attach+0xd8/0x184 [ 1.813277] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc [ 1.818852] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4 [ 1.825122] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390 [ 1.830872] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8 [ 1.836362] [<ffffffff80026bf4>] kthreadd+0x94/0x188 [ 1.841335] [<ffffffff80026bf4>] kthreadd+0x94/0x188 [ 1.846304] [<ffffffff8001fa60>] process_one_work+0x38c/0x390 [ 1.852054] [<ffffffff80026564>] kthread+0x124/0x160 [ 1.857021] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60 [ 1.862770] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc [ 1.868956] ---[ end trace 8d5c6046255f84a0 ]--- [ 1.873675] ------------[ cut here ]------------ [ 1.878366] bus-emac already unprepared [ 1.882378] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:810 clk_core_unprepare+0xe4/0x168 [ 1.890673] CPU: 0 PID: 38 Comm: kworker/u2:1 Tainted: G W 5.14.0-rc4 #1 [ 1.898674] Hardware name: Allwinner D1 NeZha (DT) [ 1.903464] Workqueue: events_unbound deferred_probe_work_func [ 1.909305] epc : clk_core_unprepare+0xe4/0x168 [ 1.913840] ra : clk_core_unprepare+0xe4/0x168 [ 1.918375] epc : ffffffff8023d6cc ra : ffffffff8023d6cc sp : ffffffd00411bb10 [ 1.925593] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : 0000000000000002 [ 1.932811] t1 : ffffffe01f743be0 t2 : 0000000000000040 s0 : ffffffe001509e00 [ 1.940029] s1 : 0000000000000001 a0 : 000000000000001b a1 : ffffffe00143a800 [ 1.947246] a2 : 0000000000000000 a3 : 00000000000000f4 a4 : 0000000000000001 [ 1.954463] a5 : 0000000000000000 a6 : 0000000005fce2a5 a7 : 0000000000000001 [ 1.961680] s2 : 0000000000000800 s3 : ffffffff80afeb90 s4 : ffffffe01fdf7a80 [ 1.968898] s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff [ 1.976115] s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000 [ 1.983333] s11: ffffffe001b80760 t3 : ffffffff80b39120 t4 : 0000000000000001 [ 1.990550] t5 : 0000000000000000 t6 : ffffffe001600002 [ 1.995859] status: 8000000201800120 badaddr: 0000000000000000 cause: 0000000000000003 [ 2.003771] [<ffffffff8023d6cc>] clk_core_unprepare+0xe4/0x168 [ 2.009609] [<ffffffff802403a0>] clk_unprepare+0x24/0x3c [ 2.014929] [<ffffffff8031a508>] stmmac_remove_config_dt+0x24/0x4c [ 2.021125] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c [ 2.026965] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8 [ 2.032463] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0 [ 2.037871] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c [ 2.043795] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148 [ 2.049892] [<ffffffff8029873c>] driver_probe_device+0x38/0x138 [ 2.055815] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170 [ 2.061999] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0 [ 2.068616] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4 [ 2.074193] [<ffffffff80298d1c>] __device_attach+0xd8/0x184 [ 2.079769] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc [ 2.085345] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4 [ 2.091616] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390 [ 2.097367] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8 [ 2.102858] [<ffffffff80026bf4>] kthreadd+0x94/0x188 [ 2.107830] [<ffffffff80026bf4>] kthreadd+0x94/0x188 [ 2.112800] [<ffffffff8001fa60>] process_one_work+0x38c/0x390 [ 2.118551] [<ffffffff80026564>] kthread+0x124/0x160 [ 2.123520] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60 [ 2.129268] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc [ 2.135455] ---[ end trace 8d5c6046255f84a1 ]--- Fixes: 5ec5582 ("net: stmmac: add clocks management for gmac driver") Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 16, 2022
A ceph user has reported that ceph is crashing with kernel NULL pointer dereference. Following is the backtrace. /proc/version: Linux version 5.16.2-arch1-1 (linux@archlinux) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Thu, 20 Jan 2022 16:18:29 +0000 distro / arch: Arch Linux / x86_64 SELinux is not enabled ceph cluster version: 16.2.7 (dd0603118f56ab514f133c8d2e3adfc983942503) relevant dmesg output: [ 30.947129] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 30.947206] #PF: supervisor read access in kernel mode [ 30.947258] #PF: error_code(0x0000) - not-present page [ 30.947310] PGD 0 P4D 0 [ 30.947342] Oops: 0000 [#1] PREEMPT SMP PTI [ 30.947388] CPU: 5 PID: 778 Comm: touch Not tainted 5.16.2-arch1-1 #1 86fbf2c313cc37a553d65deb81d98e9dcc2a3659 [ 30.947486] Hardware name: Gigabyte Technology Co., Ltd. B365M DS3H/B365M DS3H, BIOS F5 08/13/2019 [ 30.947569] RIP: 0010:strlen+0x0/0x20 [ 30.947616] Code: b6 07 38 d0 74 16 48 83 c7 01 84 c0 74 05 48 39 f7 75 ec 31 c0 31 d2 89 d6 89 d7 c3 48 89 f8 31 d2 89 d6 89 d7 c3 0 f 1f 40 00 <80> 3f 00 74 12 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 31 ff [ 30.947782] RSP: 0018:ffffa4ed80ffbbb8 EFLAGS: 00010246 [ 30.947836] RAX: 0000000000000000 RBX: ffffa4ed80ffbc60 RCX: 0000000000000000 [ 30.947904] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 30.947971] RBP: ffff94b0d15c0ae0 R08: 0000000000000000 R09: 0000000000000000 [ 30.948040] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 30.948106] R13: 0000000000000001 R14: ffffa4ed80ffbc60 R15: 0000000000000000 [ 30.948174] FS: 00007fc7520f0740(0000) GS:ffff94b7ced40000(0000) knlGS:0000000000000000 [ 30.948252] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 30.948308] CR2: 0000000000000000 CR3: 0000000104a40001 CR4: 00000000003706e0 [ 30.948376] Call Trace: [ 30.948404] <TASK> [ 30.948431] ceph_security_init_secctx+0x7b/0x240 [ceph 49f9c4b9bf5be8760f19f1747e26da33920bce4b] [ 30.948582] ceph_atomic_open+0x51e/0x8a0 [ceph 49f9c4b9bf5be8760f19f1747e26da33920bce4b] [ 30.948708] ? get_cached_acl+0x4d/0xa0 [ 30.948759] path_openat+0x60d/0x1030 [ 30.948809] do_filp_open+0xa5/0x150 [ 30.948859] do_sys_openat2+0xc4/0x190 [ 30.948904] __x64_sys_openat+0x53/0xa0 [ 30.948948] do_syscall_64+0x5c/0x90 [ 30.948989] ? exc_page_fault+0x72/0x180 [ 30.949034] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 30.949091] RIP: 0033:0x7fc7521e25bb [ 30.950849] Code: 25 00 00 41 00 3d 00 00 41 00 74 4b 64 8b 04 25 18 00 00 00 85 c0 75 67 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 0 0 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 91 00 00 00 48 8b 54 24 28 64 48 2b 14 25 Core of the problem is that ceph checks for return code from security_dentry_init_security() and if return code is 0, it assumes everything is fine and continues to call strlen(name), which crashes. Typically SELinux LSM returns 0 and sets name to "security.selinux" and it is not a problem. Or if selinux is not compiled in or disabled, it returns -EOPNOTSUP and ceph deals with it. But somehow in this configuration, 0 is being returned and "name" is not being initialized and that's creating the problem. Our suspicion is that BPF LSM is registering a hook for dentry_init_security() and returns hook default of 0. LSM_HOOK(int, 0, dentry_init_security, struct dentry *dentry,...) I have not been able to reproduce it just by doing CONFIG_BPF_LSM=y. Stephen has tested the patch though and confirms it solves the problem for him. dentry_init_security() is written in such a way that it expects only one LSM to register the hook. Atleast that's the expectation with current code. If another LSM returns a hook and returns default, it will simply return 0 as of now and that will break ceph. Hence, suggestion is that change semantics of this hook a bit. If there are no LSMs or no LSM is taking ownership and initializing security context, then return -EOPNOTSUP. Also allow at max one LSM to initialize security context. This hook can't deal with multiple LSMs trying to init security context. This patch implements this new behavior. Reported-by: Stephen Muth <[email protected]> Tested-by: Stephen Muth <[email protected]> Suggested-by: Casey Schaufler <[email protected]> Acked-by: Casey Schaufler <[email protected]> Reviewed-by: Serge Hallyn <[email protected]> Cc: Jeff Layton <[email protected]> Cc: Christian Brauner <[email protected]> Cc: Paul Moore <[email protected]> Cc: <[email protected]> # 5.16.0 Signed-off-by: Vivek Goyal <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Acked-by: Paul Moore <[email protected]> Acked-by: Christian Brauner <[email protected]> Signed-off-by: James Morris <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 16, 2022
With CONFIG_FORTIFY_SOURCE enabled, string functions will also perform dynamic checks using __builtin_object_size(ptr), which when failed will panic the kernel. Because the KASAN test deliberately performs out-of-bounds operations, the kernel panics with FORTIFY_SOURCE, for example: | kernel BUG at lib/string_helpers.c:910! | invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI | CPU: 1 PID: 137 Comm: kunit_try_catch Tainted: G B 5.16.0-rc3+ #3 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 | RIP: 0010:fortify_panic+0x19/0x1b | ... | Call Trace: | kmalloc_oob_in_memset.cold+0x16/0x16 | ... Fix it by also hiding `ptr` from the optimizer, which will ensure that __builtin_object_size() does not return a valid size, preventing fortified string functions from panicking. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Marco Elver <[email protected]> Reported-by: Nico Pache <[email protected]> Reviewed-by: Nico Pache <[email protected]> Reviewed-by: Andrey Konovalov <[email protected]> Reviewed-by: Kees Cook <[email protected]> Cc: Andrey Ryabinin <[email protected]> Cc: Alexander Potapenko <[email protected]> Cc: Dmitry Vyukov <[email protected]> Cc: Brendan Higgins <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 16, 2022
When we replace TCP with SMC and a fallback occurs, there may be some socket waitqueue entries remaining in smc socket->wq, such as eppoll_entries inserted by userspace applications. After the fallback, data flows over TCP/IP and only clcsocket->wq will be woken up. Applications can't be notified by the entries which were inserted in smc socket->wq before fallback. So we need a mechanism to wake up smc socket->wq at the same time if some entries remaining in it. The current workaround is to transfer the entries from smc socket->wq to clcsock->wq during the fallback. But this may cause a crash like this: general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] PREEMPT SMP PTI CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Tainted: G E 5.16.0+ torvalds#107 RIP: 0010:__wake_up_common+0x65/0x170 Call Trace: <IRQ> __wake_up_common_lock+0x7a/0xc0 sock_def_readable+0x3c/0x70 tcp_data_queue+0x4a7/0xc40 tcp_rcv_established+0x32f/0x660 ? sk_filter_trim_cap+0xcb/0x2e0 tcp_v4_do_rcv+0x10b/0x260 tcp_v4_rcv+0xd2a/0xde0 ip_protocol_deliver_rcu+0x3b/0x1d0 ip_local_deliver_finish+0x54/0x60 ip_local_deliver+0x6a/0x110 ? tcp_v4_early_demux+0xa2/0x140 ? tcp_v4_early_demux+0x10d/0x140 ip_sublist_rcv_finish+0x49/0x60 ip_sublist_rcv+0x19d/0x230 ip_list_rcv+0x13e/0x170 __netif_receive_skb_list_core+0x1c2/0x240 netif_receive_skb_list_internal+0x1e6/0x320 napi_complete_done+0x11d/0x190 mlx5e_napi_poll+0x163/0x6b0 [mlx5_core] __napi_poll+0x3c/0x1b0 net_rx_action+0x27c/0x300 __do_softirq+0x114/0x2d2 irq_exit_rcu+0xb4/0xe0 common_interrupt+0xba/0xe0 </IRQ> <TASK> The crash is caused by privately transferring waitqueue entries from smc socket->wq to clcsock->wq. The owners of these entries, such as epoll, have no idea that the entries have been transferred to a different socket wait queue and still use original waitqueue spinlock (smc socket->wq.wait.lock) to make the entries operation exclusive, but it doesn't work. The operations to the entries, such as removing from the waitqueue (now is clcsock->wq after fallback), may cause a crash when clcsock waitqueue is being iterated over at the moment. This patch tries to fix this by no longer transferring wait queue entries privately, but introducing own implementations of clcsock's callback functions in fallback situation. The callback functions will forward the wakeup to smc socket->wq if clcsock->wq is actually woken up and smc socket->wq has remaining entries. Fixes: 2153bd1 ("net/smc: Transfer remaining wait queue entries during fallback") Suggested-by: Karsten Graul <[email protected]> Signed-off-by: Wen Gu <[email protected]> Acked-by: Karsten Graul <[email protected]> Signed-off-by: David S. Miller <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 16, 2022
Quota disable ioctl starts a transaction before waiting for the qgroup rescan worker completes. However, this wait can be infinite and results in deadlock because of circular dependency among the quota disable ioctl, the qgroup rescan worker and the other task with transaction such as block group relocation task. The deadlock happens with the steps following: 1) Task A calls ioctl to disable quota. It starts a transaction and waits for qgroup rescan worker completes. 2) Task B such as block group relocation task starts a transaction and joins to the transaction that task A started. Then task B commits to the transaction. In this commit, task B waits for a commit by task A. 3) Task C as the qgroup rescan worker starts its job and starts a transaction. In this transaction start, task C waits for completion of the transaction that task A started and task B committed. This deadlock was found with fstests test case btrfs/115 and a zoned null_blk device. The test case enables and disables quota, and the block group reclaim was triggered during the quota disable by chance. The deadlock was also observed by running quota enable and disable in parallel with 'btrfs balance' command on regular null_blk devices. An example report of the deadlock: [372.469894] INFO: task kworker/u16:6:103 blocked for more than 122 seconds. [372.479944] Not tainted 5.16.0-rc8 torvalds#7 [372.485067] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [372.493898] task:kworker/u16:6 state:D stack: 0 pid: 103 ppid: 2 flags:0x00004000 [372.503285] Workqueue: btrfs-qgroup-rescan btrfs_work_helper [btrfs] [372.510782] Call Trace: [372.514092] <TASK> [372.521684] __schedule+0xb56/0x4850 [372.530104] ? io_schedule_timeout+0x190/0x190 [372.538842] ? lockdep_hardirqs_on+0x7e/0x100 [372.547092] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [372.555591] schedule+0xe0/0x270 [372.561894] btrfs_commit_transaction+0x18bb/0x2610 [btrfs] [372.570506] ? btrfs_apply_pending_changes+0x50/0x50 [btrfs] [372.578875] ? free_unref_page+0x3f2/0x650 [372.585484] ? finish_wait+0x270/0x270 [372.591594] ? release_extent_buffer+0x224/0x420 [btrfs] [372.599264] btrfs_qgroup_rescan_worker+0xc13/0x10c0 [btrfs] [372.607157] ? lock_release+0x3a9/0x6d0 [372.613054] ? btrfs_qgroup_account_extent+0xda0/0xda0 [btrfs] [372.620960] ? do_raw_spin_lock+0x11e/0x250 [372.627137] ? rwlock_bug.part.0+0x90/0x90 [372.633215] ? lock_is_held_type+0xe4/0x140 [372.639404] btrfs_work_helper+0x1ae/0xa90 [btrfs] [372.646268] process_one_work+0x7e9/0x1320 [372.652321] ? lock_release+0x6d0/0x6d0 [372.658081] ? pwq_dec_nr_in_flight+0x230/0x230 [372.664513] ? rwlock_bug.part.0+0x90/0x90 [372.670529] worker_thread+0x59e/0xf90 [372.676172] ? process_one_work+0x1320/0x1320 [372.682440] kthread+0x3b9/0x490 [372.687550] ? _raw_spin_unlock_irq+0x24/0x50 [372.693811] ? set_kthread_struct+0x100/0x100 [372.700052] ret_from_fork+0x22/0x30 [372.705517] </TASK> [372.709747] INFO: task btrfs-transacti:2347 blocked for more than 123 seconds. [372.729827] Not tainted 5.16.0-rc8 torvalds#7 [372.745907] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [372.767106] task:btrfs-transacti state:D stack: 0 pid: 2347 ppid: 2 flags:0x00004000 [372.787776] Call Trace: [372.801652] <TASK> [372.812961] __schedule+0xb56/0x4850 [372.830011] ? io_schedule_timeout+0x190/0x190 [372.852547] ? lockdep_hardirqs_on+0x7e/0x100 [372.871761] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [372.886792] schedule+0xe0/0x270 [372.901685] wait_current_trans+0x22c/0x310 [btrfs] [372.919743] ? btrfs_put_transaction+0x3d0/0x3d0 [btrfs] [372.938923] ? finish_wait+0x270/0x270 [372.959085] ? join_transaction+0xc75/0xe30 [btrfs] [372.977706] start_transaction+0x938/0x10a0 [btrfs] [372.997168] transaction_kthread+0x19d/0x3c0 [btrfs] [373.013021] ? btrfs_cleanup_transaction.isra.0+0xfc0/0xfc0 [btrfs] [373.031678] kthread+0x3b9/0x490 [373.047420] ? _raw_spin_unlock_irq+0x24/0x50 [373.064645] ? set_kthread_struct+0x100/0x100 [373.078571] ret_from_fork+0x22/0x30 [373.091197] </TASK> [373.105611] INFO: task btrfs:3145 blocked for more than 123 seconds. [373.114147] Not tainted 5.16.0-rc8 torvalds#7 [373.120401] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [373.130393] task:btrfs state:D stack: 0 pid: 3145 ppid: 3141 flags:0x00004000 [373.140998] Call Trace: [373.145501] <TASK> [373.149654] __schedule+0xb56/0x4850 [373.155306] ? io_schedule_timeout+0x190/0x190 [373.161965] ? lockdep_hardirqs_on+0x7e/0x100 [373.168469] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [373.175468] schedule+0xe0/0x270 [373.180814] wait_for_commit+0x104/0x150 [btrfs] [373.187643] ? test_and_set_bit+0x20/0x20 [btrfs] [373.194772] ? kmem_cache_free+0x124/0x550 [373.201191] ? btrfs_put_transaction+0x69/0x3d0 [btrfs] [373.208738] ? finish_wait+0x270/0x270 [373.214704] ? __btrfs_end_transaction+0x347/0x7b0 [btrfs] [373.222342] btrfs_commit_transaction+0x44d/0x2610 [btrfs] [373.230233] ? join_transaction+0x255/0xe30 [btrfs] [373.237334] ? btrfs_record_root_in_trans+0x4d/0x170 [btrfs] [373.245251] ? btrfs_apply_pending_changes+0x50/0x50 [btrfs] [373.253296] relocate_block_group+0x105/0xc20 [btrfs] [373.260533] ? mutex_lock_io_nested+0x1270/0x1270 [373.267516] ? btrfs_wait_nocow_writers+0x85/0x180 [btrfs] [373.275155] ? merge_reloc_roots+0x710/0x710 [btrfs] [373.283602] ? btrfs_wait_ordered_extents+0xd30/0xd30 [btrfs] [373.291934] ? kmem_cache_free+0x124/0x550 [373.298180] btrfs_relocate_block_group+0x35c/0x930 [btrfs] [373.306047] btrfs_relocate_chunk+0x85/0x210 [btrfs] [373.313229] btrfs_balance+0x12f4/0x2d20 [btrfs] [373.320227] ? lock_release+0x3a9/0x6d0 [373.326206] ? btrfs_relocate_chunk+0x210/0x210 [btrfs] [373.333591] ? lock_is_held_type+0xe4/0x140 [373.340031] ? rcu_read_lock_sched_held+0x3f/0x70 [373.346910] btrfs_ioctl_balance+0x548/0x700 [btrfs] [373.354207] btrfs_ioctl+0x7f2/0x71b0 [btrfs] [373.360774] ? lockdep_hardirqs_on_prepare+0x410/0x410 [373.367957] ? lockdep_hardirqs_on_prepare+0x410/0x410 [373.375327] ? btrfs_ioctl_get_supported_features+0x20/0x20 [btrfs] [373.383841] ? find_held_lock+0x2c/0x110 [373.389993] ? lock_release+0x3a9/0x6d0 [373.395828] ? mntput_no_expire+0xf7/0xad0 [373.402083] ? lock_is_held_type+0xe4/0x140 [373.408249] ? vfs_fileattr_set+0x9f0/0x9f0 [373.414486] ? selinux_file_ioctl+0x349/0x4e0 [373.420938] ? trace_raw_output_lock+0xb4/0xe0 [373.427442] ? selinux_inode_getsecctx+0x80/0x80 [373.434224] ? lockdep_hardirqs_on+0x7e/0x100 [373.440660] ? force_qs_rnp+0x2a0/0x6b0 [373.446534] ? lock_is_held_type+0x9b/0x140 [373.452763] ? __blkcg_punt_bio_submit+0x1b0/0x1b0 [373.459732] ? security_file_ioctl+0x50/0x90 [373.466089] __x64_sys_ioctl+0x127/0x190 [373.472022] do_syscall_64+0x3b/0x90 [373.477513] entry_SYSCALL_64_after_hwframe+0x44/0xae [373.484823] RIP: 0033:0x7f8f4af7e2bb [373.490493] RSP: 002b:00007ffcbf936178 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [373.500197] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f8f4af7e2bb [373.509451] RDX: 00007ffcbf936220 RSI: 00000000c4009420 RDI: 0000000000000003 [373.518659] RBP: 00007ffcbf93774a R08: 0000000000000013 R09: 00007f8f4b02d4e0 [373.527872] R10: 00007f8f4ae87740 R11: 0000000000000246 R12: 0000000000000001 [373.537222] R13: 00007ffcbf936220 R14: 0000000000000000 R15: 0000000000000002 [373.546506] </TASK> [373.550878] INFO: task btrfs:3146 blocked for more than 123 seconds. [373.559383] Not tainted 5.16.0-rc8 torvalds#7 [373.565748] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [373.575748] task:btrfs state:D stack: 0 pid: 3146 ppid: 2168 flags:0x00000000 [373.586314] Call Trace: [373.590846] <TASK> [373.595121] __schedule+0xb56/0x4850 [373.600901] ? __lock_acquire+0x23db/0x5030 [373.607176] ? io_schedule_timeout+0x190/0x190 [373.613954] schedule+0xe0/0x270 [373.619157] schedule_timeout+0x168/0x220 [373.625170] ? usleep_range_state+0x150/0x150 [373.631653] ? mark_held_locks+0x9e/0xe0 [373.637767] ? do_raw_spin_lock+0x11e/0x250 [373.643993] ? lockdep_hardirqs_on_prepare+0x17b/0x410 [373.651267] ? _raw_spin_unlock_irq+0x24/0x50 [373.657677] ? lockdep_hardirqs_on+0x7e/0x100 [373.664103] wait_for_completion+0x163/0x250 [373.670437] ? bit_wait_timeout+0x160/0x160 [373.676585] btrfs_quota_disable+0x176/0x9a0 [btrfs] [373.683979] ? btrfs_quota_enable+0x12f0/0x12f0 [btrfs] [373.691340] ? down_write+0xd0/0x130 [373.696880] ? down_write_killable+0x150/0x150 [373.703352] btrfs_ioctl+0x3945/0x71b0 [btrfs] [373.710061] ? find_held_lock+0x2c/0x110 [373.716192] ? lock_release+0x3a9/0x6d0 [373.722047] ? __handle_mm_fault+0x23cd/0x3050 [373.728486] ? btrfs_ioctl_get_supported_features+0x20/0x20 [btrfs] [373.737032] ? set_pte+0x6a/0x90 [373.742271] ? do_raw_spin_unlock+0x55/0x1f0 [373.748506] ? lock_is_held_type+0xe4/0x140 [373.754792] ? vfs_fileattr_set+0x9f0/0x9f0 [373.761083] ? selinux_file_ioctl+0x349/0x4e0 [373.767521] ? selinux_inode_getsecctx+0x80/0x80 [373.774247] ? __up_read+0x182/0x6e0 [373.780026] ? count_memcg_events.constprop.0+0x46/0x60 [373.787281] ? up_write+0x460/0x460 [373.792932] ? security_file_ioctl+0x50/0x90 [373.799232] __x64_sys_ioctl+0x127/0x190 [373.805237] do_syscall_64+0x3b/0x90 [373.810947] entry_SYSCALL_64_after_hwframe+0x44/0xae [373.818102] RIP: 0033:0x7f1383ea02bb [373.823847] RSP: 002b:00007fffeb4d71f8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [373.833641] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1383ea02bb [373.842961] RDX: 00007fffeb4d7210 RSI: 00000000c0109428 RDI: 0000000000000003 [373.852179] RBP: 0000000000000003 R08: 0000000000000003 R09: 0000000000000078 [373.861408] R10: 00007f1383daec78 R11: 0000000000000202 R12: 00007fffeb4d874a [373.870647] R13: 0000000000493099 R14: 0000000000000001 R15: 0000000000000000 [373.879838] </TASK> [373.884018] Showing all locks held in the system: [373.894250] 3 locks held by kworker/4:1/58: [373.900356] 1 lock held by khungtaskd/63: [373.906333] #0: ffffffff8945ff60 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260 [373.917307] 3 locks held by kworker/u16:6/103: [373.923938] #0: ffff888127b4f138 ((wq_completion)btrfs-qgroup-rescan){+.+.}-{0:0}, at: process_one_work+0x712/0x1320 [373.936555] #1: ffff88810b817dd8 ((work_completion)(&work->normal_work)){+.+.}-{0:0}, at: process_one_work+0x73f/0x1320 [373.951109] #2: ffff888102dd4650 (sb_internal#2){.+.+}-{0:0}, at: btrfs_qgroup_rescan_worker+0x1f6/0x10c0 [btrfs] [373.964027] 2 locks held by less/1803: [373.969982] #0: ffff88813ed56098 (&tty->ldisc_sem){++++}-{0:0}, at: tty_ldisc_ref_wait+0x24/0x80 [373.981295] #1: ffffc90000b3b2e8 (&ldata->atomic_read_lock){+.+.}-{3:3}, at: n_tty_read+0x9e2/0x1060 [373.992969] 1 lock held by btrfs-transacti/2347: [373.999893] #0: ffff88813d4887a8 (&fs_info->transaction_kthread_mutex){+.+.}-{3:3}, at: transaction_kthread+0xe3/0x3c0 [btrfs] [374.015872] 3 locks held by btrfs/3145: [374.022298] #0: ffff888102dd4460 (sb_writers#18){.+.+}-{0:0}, at: btrfs_ioctl_balance+0xc3/0x700 [btrfs] [374.034456] #1: ffff88813d48a0a0 (&fs_info->reclaim_bgs_lock){+.+.}-{3:3}, at: btrfs_balance+0xfe5/0x2d20 [btrfs] [374.047646] #2: ffff88813d488838 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: btrfs_relocate_block_group+0x354/0x930 [btrfs] [374.063295] 4 locks held by btrfs/3146: [374.069647] #0: ffff888102dd4460 (sb_writers#18){.+.+}-{0:0}, at: btrfs_ioctl+0x38b1/0x71b0 [btrfs] [374.081601] #1: ffff88813d488bb8 (&fs_info->subvol_sem){+.+.}-{3:3}, at: btrfs_ioctl+0x38fd/0x71b0 [btrfs] [374.094283] #2: ffff888102dd4650 (sb_internal#2){.+.+}-{0:0}, at: btrfs_quota_disable+0xc8/0x9a0 [btrfs] [374.106885] #3: ffff88813d489800 (&fs_info->qgroup_ioctl_lock){+.+.}-{3:3}, at: btrfs_quota_disable+0xd5/0x9a0 [btrfs] [374.126780] ============================================= To avoid the deadlock, wait for the qgroup rescan worker to complete before starting the transaction for the quota disable ioctl. Clear BTRFS_FS_QUOTA_ENABLE flag before the wait and the transaction to request the worker to complete. On transaction start failure, set the BTRFS_FS_QUOTA_ENABLE flag again. These BTRFS_FS_QUOTA_ENABLE flag changes can be done safely since the function btrfs_quota_disable is not called concurrently because of fs_info->subvol_sem. Also check the BTRFS_FS_QUOTA_ENABLE flag in qgroup_rescan_init to avoid another qgroup rescan worker to start after the previous qgroup worker completed. CC: [email protected] # 5.4+ Suggested-by: Nikolay Borisov <[email protected]> Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Shin'ichiro Kawasaki <[email protected]> Signed-off-by: David Sterba <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 16, 2022
while mounting the crafted image, out-of-bounds access happens: [350.429619] UBSAN: array-index-out-of-bounds in fs/btrfs/struct-funcs.c:161:1 [350.429636] index 1048096 is out of range for type 'page *[16]' [350.429650] CPU: 0 PID: 9 Comm: kworker/u8:1 Not tainted 5.16.0-rc4 #1 [350.429652] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 [350.429653] Workqueue: btrfs-endio-meta btrfs_work_helper [btrfs] [350.429772] Call Trace: [350.429774] <TASK> [350.429776] dump_stack_lvl+0x47/0x5c [350.429780] ubsan_epilogue+0x5/0x50 [350.429786] __ubsan_handle_out_of_bounds+0x66/0x70 [350.429791] btrfs_get_16+0xfd/0x120 [btrfs] [350.429832] check_leaf+0x754/0x1a40 [btrfs] [350.429874] ? filemap_read+0x34a/0x390 [350.429878] ? load_balance+0x175/0xfc0 [350.429881] validate_extent_buffer+0x244/0x310 [btrfs] [350.429911] btrfs_validate_metadata_buffer+0xf8/0x100 [btrfs] [350.429935] end_bio_extent_readpage+0x3af/0x850 [btrfs] [350.429969] ? newidle_balance+0x259/0x480 [350.429972] end_workqueue_fn+0x29/0x40 [btrfs] [350.429995] btrfs_work_helper+0x71/0x330 [btrfs] [350.430030] ? __schedule+0x2fb/0xa40 [350.430033] process_one_work+0x1f6/0x400 [350.430035] ? process_one_work+0x400/0x400 [350.430036] worker_thread+0x2d/0x3d0 [350.430037] ? process_one_work+0x400/0x400 [350.430038] kthread+0x165/0x190 [350.430041] ? set_kthread_struct+0x40/0x40 [350.430043] ret_from_fork+0x1f/0x30 [350.430047] </TASK> [350.430077] BTRFS warning (device loop0): bad eb member start: ptr 0xffe20f4e start 20975616 member offset 4293005178 size 2 check_leaf() is checking the leaf: corrupt leaf: root=4 block=29396992 slot=1, bad key order, prev (16140901064495857664 1 0) current (1 204 12582912) leaf 29396992 items 6 free space 3565 generation 6 owner DEV_TREE leaf 29396992 flags 0x1(WRITTEN) backref revision 1 fs uuid a62e00e8-e94e-4200-8217-12444de93c2e chunk uuid cecbd0f7-9ca0-441e-ae9f-f782f9732bd8 item 0 key (16140901064495857664 INODE_ITEM 0) itemoff 3955 itemsize 40 generation 0 transid 0 size 0 nbytes 17592186044416 block group 0 mode 52667 links 33 uid 0 gid 2104132511 rdev 94223634821136 sequence 100305 flags 0x2409000(none) atime 0.0 (1970-01-01 08:00:00) ctime 2973280098083405823.4294967295 (-269783007-01-01 21:37:03) mtime 18446744071572723616.4026825121 (1902-04-16 12:40:00) otime 9249929404488876031.4294967295 (622322949-04-16 04:25:58) item 1 key (1 DEV_EXTENT 12582912) itemoff 3907 itemsize 48 dev extent chunk_tree 3 chunk_objectid 256 chunk_offset 12582912 length 8388608 chunk_tree_uuid cecbd0f7-9ca0-441e-ae9f-f782f9732bd8 The corrupted leaf of device tree has an inode item. The leaf passed checksum and others checks in validate_extent_buffer until check_leaf_item(). Because of the key type BTRFS_INODE_ITEM, check_inode_item() is called even we are in the device tree. Since the item offset + sizeof(struct btrfs_inode_item) > eb->len, out-of-bounds access is triggered. The item end vs leaf boundary check has been done before check_leaf_item(), so fix it by checking item size in check_inode_item() before access of the inode item in extent buffer. Other check functions except check_dev_item() in check_leaf_item() have their item size checks. The commit for check_dev_item() is followed. No regression observed during running fstests. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215299 CC: [email protected] # 5.10+ CC: Wenqing Liu <[email protected]> Signed-off-by: Su Yue <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 16, 2022
After the recent changes made by commit c2e3930 ("btrfs: clear extent buffer uptodate when we fail to write it") and its followup fix, commit 651740a ("btrfs: check WRITE_ERR when trying to read an extent buffer"), we can now end up not cleaning up space reservations of log tree extent buffers after a transaction abort happens, as well as not cleaning up still dirty extent buffers. This happens because if writeback for a log tree extent buffer failed, then we have cleared the bit EXTENT_BUFFER_UPTODATE from the extent buffer and we have also set the bit EXTENT_BUFFER_WRITE_ERR on it. Later on, when trying to free the log tree with free_log_tree(), which iterates over the tree, we can end up getting an -EIO error when trying to read a node or a leaf, since read_extent_buffer_pages() returns -EIO if an extent buffer does not have EXTENT_BUFFER_UPTODATE set and has the EXTENT_BUFFER_WRITE_ERR bit set. Getting that -EIO means that we return immediately as we can not iterate over the entire tree. In that case we never update the reserved space for an extent buffer in the respective block group and space_info object. When this happens we get the following traces when unmounting the fs: [174957.284509] BTRFS: error (device dm-0) in cleanup_transaction:1913: errno=-5 IO failure [174957.286497] BTRFS: error (device dm-0) in free_log_tree:3420: errno=-5 IO failure [174957.399379] ------------[ cut here ]------------ [174957.402497] WARNING: CPU: 2 PID: 3206883 at fs/btrfs/block-group.c:127 btrfs_put_block_group+0x77/0xb0 [btrfs] [174957.407523] Modules linked in: btrfs overlay dm_zero (...) [174957.424917] CPU: 2 PID: 3206883 Comm: umount Tainted: G W 5.16.0-rc5-btrfs-next-109 #1 [174957.426689] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [174957.428716] RIP: 0010:btrfs_put_block_group+0x77/0xb0 [btrfs] [174957.429717] Code: 21 48 8b bd (...) [174957.432867] RSP: 0018:ffffb70d41cffdd0 EFLAGS: 00010206 [174957.433632] RAX: 0000000000000001 RBX: ffff8b09c3848000 RCX: ffff8b0758edd1c8 [174957.434689] RDX: 0000000000000001 RSI: ffffffffc0b467e7 RDI: ffff8b0758edd000 [174957.436068] RBP: ffff8b0758edd000 R08: 0000000000000000 R09: 0000000000000000 [174957.437114] R10: 0000000000000246 R11: 0000000000000000 R12: ffff8b09c3848148 [174957.438140] R13: ffff8b09c3848198 R14: ffff8b0758edd188 R15: dead000000000100 [174957.439317] FS: 00007f328fb82800(0000) GS:ffff8b0a2d200000(0000) knlGS:0000000000000000 [174957.440402] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [174957.441164] CR2: 00007fff13563e98 CR3: 0000000404f4e005 CR4: 0000000000370ee0 [174957.442117] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [174957.443076] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [174957.443948] Call Trace: [174957.444264] <TASK> [174957.444538] btrfs_free_block_groups+0x255/0x3c0 [btrfs] [174957.445238] close_ctree+0x301/0x357 [btrfs] [174957.445803] ? call_rcu+0x16c/0x290 [174957.446250] generic_shutdown_super+0x74/0x120 [174957.446832] kill_anon_super+0x14/0x30 [174957.447305] btrfs_kill_super+0x12/0x20 [btrfs] [174957.447890] deactivate_locked_super+0x31/0xa0 [174957.448440] cleanup_mnt+0x147/0x1c0 [174957.448888] task_work_run+0x5c/0xa0 [174957.449336] exit_to_user_mode_prepare+0x1e5/0x1f0 [174957.449934] syscall_exit_to_user_mode+0x16/0x40 [174957.450512] do_syscall_64+0x48/0xc0 [174957.450980] entry_SYSCALL_64_after_hwframe+0x44/0xae [174957.451605] RIP: 0033:0x7f328fdc4a97 [174957.452059] Code: 03 0c 00 f7 (...) [174957.454320] RSP: 002b:00007fff13564ec8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [174957.455262] RAX: 0000000000000000 RBX: 00007f328feea264 RCX: 00007f328fdc4a97 [174957.456131] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000560b8ae51dd0 [174957.457118] RBP: 0000560b8ae51ba0 R08: 0000000000000000 R09: 00007fff13563c40 [174957.458005] R10: 00007f328fe49fc0 R11: 0000000000000246 R12: 0000000000000000 [174957.459113] R13: 0000560b8ae51dd0 R14: 0000560b8ae51cb0 R15: 0000000000000000 [174957.460193] </TASK> [174957.460534] irq event stamp: 0 [174957.461003] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [174957.461947] hardirqs last disabled at (0): [<ffffffffb0e94214>] copy_process+0x934/0x2040 [174957.463147] softirqs last enabled at (0): [<ffffffffb0e94214>] copy_process+0x934/0x2040 [174957.465116] softirqs last disabled at (0): [<0000000000000000>] 0x0 [174957.466323] ---[ end trace bc7ee0c490bce3af ]--- [174957.467282] ------------[ cut here ]------------ [174957.468184] WARNING: CPU: 2 PID: 3206883 at fs/btrfs/block-group.c:3976 btrfs_free_block_groups+0x330/0x3c0 [btrfs] [174957.470066] Modules linked in: btrfs overlay dm_zero (...) [174957.483137] CPU: 2 PID: 3206883 Comm: umount Tainted: G W 5.16.0-rc5-btrfs-next-109 #1 [174957.484691] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [174957.486853] RIP: 0010:btrfs_free_block_groups+0x330/0x3c0 [btrfs] [174957.488050] Code: 00 00 00 ad de (...) [174957.491479] RSP: 0018:ffffb70d41cffde0 EFLAGS: 00010206 [174957.492520] RAX: ffff8b08d79310b0 RBX: ffff8b09c3848000 RCX: 0000000000000000 [174957.493868] RDX: 0000000000000001 RSI: fffff443055ee600 RDI: ffffffffb1131846 [174957.495183] RBP: ffff8b08d79310b0 R08: 0000000000000000 R09: 0000000000000000 [174957.496580] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8b08d7931000 [174957.498027] R13: ffff8b09c38492b0 R14: dead000000000122 R15: dead000000000100 [174957.499438] FS: 00007f328fb82800(0000) GS:ffff8b0a2d200000(0000) knlGS:0000000000000000 [174957.500990] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [174957.502117] CR2: 00007fff13563e98 CR3: 0000000404f4e005 CR4: 0000000000370ee0 [174957.503513] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [174957.504864] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [174957.506167] Call Trace: [174957.506654] <TASK> [174957.507047] close_ctree+0x301/0x357 [btrfs] [174957.507867] ? call_rcu+0x16c/0x290 [174957.508567] generic_shutdown_super+0x74/0x120 [174957.509447] kill_anon_super+0x14/0x30 [174957.510194] btrfs_kill_super+0x12/0x20 [btrfs] [174957.511123] deactivate_locked_super+0x31/0xa0 [174957.511976] cleanup_mnt+0x147/0x1c0 [174957.512610] task_work_run+0x5c/0xa0 [174957.513309] exit_to_user_mode_prepare+0x1e5/0x1f0 [174957.514231] syscall_exit_to_user_mode+0x16/0x40 [174957.515069] do_syscall_64+0x48/0xc0 [174957.515718] entry_SYSCALL_64_after_hwframe+0x44/0xae [174957.516688] RIP: 0033:0x7f328fdc4a97 [174957.517413] Code: 03 0c 00 f7 d8 (...) [174957.521052] RSP: 002b:00007fff13564ec8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [174957.522514] RAX: 0000000000000000 RBX: 00007f328feea264 RCX: 00007f328fdc4a97 [174957.523950] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000560b8ae51dd0 [174957.525375] RBP: 0000560b8ae51ba0 R08: 0000000000000000 R09: 00007fff13563c40 [174957.526763] R10: 00007f328fe49fc0 R11: 0000000000000246 R12: 0000000000000000 [174957.528058] R13: 0000560b8ae51dd0 R14: 0000560b8ae51cb0 R15: 0000000000000000 [174957.529404] </TASK> [174957.529843] irq event stamp: 0 [174957.530256] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [174957.531061] hardirqs last disabled at (0): [<ffffffffb0e94214>] copy_process+0x934/0x2040 [174957.532075] softirqs last enabled at (0): [<ffffffffb0e94214>] copy_process+0x934/0x2040 [174957.533083] softirqs last disabled at (0): [<0000000000000000>] 0x0 [174957.533865] ---[ end trace bc7ee0c490bce3b0 ]--- [174957.534452] BTRFS info (device dm-0): space_info 4 has 1070841856 free, is not full [174957.535404] BTRFS info (device dm-0): space_info total=1073741824, used=2785280, pinned=0, reserved=49152, may_use=0, readonly=65536 zone_unusable=0 [174957.537029] BTRFS info (device dm-0): global_block_rsv: size 0 reserved 0 [174957.537859] BTRFS info (device dm-0): trans_block_rsv: size 0 reserved 0 [174957.538697] BTRFS info (device dm-0): chunk_block_rsv: size 0 reserved 0 [174957.539552] BTRFS info (device dm-0): delayed_block_rsv: size 0 reserved 0 [174957.540403] BTRFS info (device dm-0): delayed_refs_rsv: size 0 reserved 0 This also means that in case we have log tree extent buffers that are still dirty, we can end up not cleaning them up in case we find an extent buffer with EXTENT_BUFFER_WRITE_ERR set on it, as in that case we have no way for iterating over the rest of the tree. This issue is very often triggered with test cases generic/475 and generic/648 from fstests. The issue could almost be fixed by iterating over the io tree attached to each log root which keeps tracks of the range of allocated extent buffers, log_root->dirty_log_pages, however that does not work and has some inconveniences: 1) After we sync the log, we clear the range of the extent buffers from the io tree, so we can't find them after writeback. We could keep the ranges in the io tree, with a separate bit to signal they represent extent buffers already written, but that means we need to hold into more memory until the transaction commits. How much more memory is used depends a lot on whether we are able to allocate contiguous extent buffers on disk (and how often) for a log tree - if we are able to, then a single extent state record can represent multiple extent buffers, otherwise we need multiple extent state record structures to track each extent buffer. In fact, my earlier approach did that: https://lore.kernel.org/linux-btrfs/3aae7c6728257c7ce2279d6660ee2797e5e34bbd.1641300250.git.fdmanana@suse.com/ However that can cause a very significant negative impact on performance, not only due to the extra memory usage but also because we get a larger and deeper dirty_log_pages io tree. We got a report that, on beefy machines at least, we can get such performance drop with fsmark for example: https://lore.kernel.org/linux-btrfs/20220117082426.GE32491@xsang-OptiPlex-9020/ 2) We would be doing it only to deal with an unexpected and exceptional case, which is basically failure to read an extent buffer from disk due to IO failures. On a healthy system we don't expect transaction aborts to happen after all; 3) Instead of relying on iterating the log tree or tracking the ranges of extent buffers in the dirty_log_pages io tree, using the radix tree that tracks extent buffers (fs_info->buffer_radix) to find all log tree extent buffers is not reliable either, because after writeback of an extent buffer it can be evicted from memory by the release page callback of the btree inode (btree_releasepage()). Since there's no way to be able to properly cleanup a log tree without being able to read its extent buffers from disk and without using more memory to track the logical ranges of the allocated extent buffers do the following: 1) When we fail to cleanup a log tree, setup a flag that indicates that failure; 2) Trigger writeback of all log tree extent buffers that are still dirty, and wait for the writeback to complete. This is just to cleanup their state, page states, page leaks, etc; 3) When unmounting the fs, ignore if the number of bytes reserved in a block group and in a space_info is not 0 if, and only if, we failed to cleanup a log tree. Also ignore only for metadata block groups and the metadata space_info object. This is far from a perfect solution, but it serves to silence test failures such as those from generic/475 and generic/648. However having a non-zero value for the reserved bytes counters on unmount after a transaction abort, is not such a terrible thing and it's completely harmless, it does not affect the filesystem integrity in any way. Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 16, 2022
Current implementation of bond netevent handler only check if the handled netdev is VF representor and it missing a check if the VF representor is on the same phys device of the bond handling the netevent. Fix by adding the missing check and optimizing the check if the netdev is VF representor so it will not access uninitialized private data and crashes. BUG: kernel NULL pointer dereference, address: 000000000000036c PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI Workqueue: eth3bond0 bond_mii_monitor [bonding] RIP: 0010:mlx5e_is_uplink_rep+0xc/0x50 [mlx5_core] RSP: 0018:ffff88812d69fd60 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8881cf800000 RCX: 0000000000000000 RDX: ffff88812d69fe10 RSI: 000000000000001b RDI: ffff8881cf800880 RBP: ffff8881cf800000 R08: 00000445cabccf2b R09: 0000000000000008 R10: 0000000000000004 R11: 0000000000000008 R12: ffff88812d69fe10 R13: 00000000fffffffe R14: ffff88820c0f9000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88846fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000036c CR3: 0000000103d80006 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mlx5e_eswitch_uplink_rep+0x31/0x40 [mlx5_core] mlx5e_rep_is_lag_netdev+0x94/0xc0 [mlx5_core] mlx5e_rep_esw_bond_netevent+0xeb/0x3d0 [mlx5_core] raw_notifier_call_chain+0x41/0x60 call_netdevice_notifiers_info+0x34/0x80 netdev_lower_state_changed+0x4e/0xa0 bond_mii_monitor+0x56b/0x640 [bonding] process_one_work+0x1b9/0x390 worker_thread+0x4d/0x3d0 ? rescuer_thread+0x350/0x350 kthread+0x124/0x150 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 Fixes: 7e51891 ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule") Signed-off-by: Maor Dickman <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Jan 26, 2025
In mana_driver_exit(), mana_debugfs_root gets cleanup before any of it's children (which happens later in the pci_unregister_driver()). Due to this, when mana driver is configured as a module and rmmod is invoked, following stack gets printed along with failure in rmmod command. [ 2399.317651] BUG: kernel NULL pointer dereference, address: 0000000000000098 [ 2399.318657] #PF: supervisor write access in kernel mode [ 2399.319057] #PF: error_code(0x0002) - not-present page [ 2399.319528] PGD 10eb68067 P4D 0 [ 2399.319914] Oops: Oops: 0002 [#1] SMP NOPTI [ 2399.320308] CPU: 72 UID: 0 PID: 5815 Comm: rmmod Not tainted 6.13.0-rc5+ torvalds#89 [ 2399.320986] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/28/2024 [ 2399.321892] RIP: 0010:down_write+0x1a/0x50 [ 2399.322303] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 54 49 89 fc e8 9d cd ff ff 31 c0 ba 01 00 00 00 <f0> 49 0f b1 14 24 75 17 65 48 8b 05 f6 84 dd 5f 49 89 44 24 08 4c [ 2399.323669] RSP: 0018:ff53859d6c663a70 EFLAGS: 00010246 [ 2399.324061] RAX: 0000000000000000 RBX: ff1d4eb505060180 RCX: ffffff8100000000 [ 2399.324620] RDX: 0000000000000001 RSI: 0000000000000064 RDI: 0000000000000098 [ 2399.325167] RBP: ff53859d6c663a78 R08: 00000000000009c4 R09: ff1d4eb4fac90000 [ 2399.325681] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000098 [ 2399.326185] R13: ff1d4e42e1a4a0c8 R14: ff1d4eb538ce0000 R15: 0000000000000098 [ 2399.326755] FS: 00007fe729570000(0000) GS:ff1d4eb2b7200000(0000) knlGS:0000000000000000 [ 2399.327269] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2399.327690] CR2: 0000000000000098 CR3: 00000001c0584005 CR4: 0000000000373ef0 [ 2399.328166] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2399.328623] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 2399.329055] Call Trace: [ 2399.329243] <TASK> [ 2399.329379] ? show_regs+0x69/0x80 [ 2399.329602] ? __die+0x25/0x70 [ 2399.329856] ? page_fault_oops+0x271/0x550 [ 2399.330088] ? psi_group_change+0x217/0x470 [ 2399.330341] ? do_user_addr_fault+0x455/0x7b0 [ 2399.330667] ? finish_task_switch.isra.0+0x91/0x2f0 [ 2399.331004] ? exc_page_fault+0x73/0x160 [ 2399.331275] ? asm_exc_page_fault+0x27/0x30 [ 2399.343324] ? down_write+0x1a/0x50 [ 2399.343631] simple_recursive_removal+0x4d/0x2c0 [ 2399.343977] ? __pfx_remove_one+0x10/0x10 [ 2399.344251] debugfs_remove+0x45/0x70 [ 2399.344511] mana_destroy_rxq+0x44/0x400 [mana] [ 2399.344845] mana_destroy_vport+0x54/0x1c0 [mana] [ 2399.345229] mana_detach+0x2f1/0x4e0 [mana] [ 2399.345466] ? ida_free+0x150/0x160 [ 2399.345718] ? __cond_resched+0x1a/0x50 [ 2399.345987] mana_remove+0xf4/0x1a0 [mana] [ 2399.346243] mana_gd_remove+0x25/0x80 [mana] [ 2399.346605] pci_device_remove+0x41/0xb0 [ 2399.346878] device_remove+0x46/0x70 [ 2399.347150] device_release_driver_internal+0x1e3/0x250 [ 2399.347831] ? klist_remove+0x81/0xe0 [ 2399.348377] driver_detach+0x4b/0xa0 [ 2399.348906] bus_remove_driver+0x83/0x100 [ 2399.349435] driver_unregister+0x31/0x60 [ 2399.349919] pci_unregister_driver+0x40/0x90 [ 2399.350492] mana_driver_exit+0x1c/0xb50 [mana] [ 2399.351102] __do_sys_delete_module.constprop.0+0x184/0x320 [ 2399.351664] ? __fput+0x1a9/0x2d0 [ 2399.352200] __x64_sys_delete_module+0x12/0x20 [ 2399.352760] x64_sys_call+0x1e66/0x2140 [ 2399.353316] do_syscall_64+0x79/0x150 [ 2399.353813] ? syscall_exit_to_user_mode+0x49/0x230 [ 2399.354346] ? do_syscall_64+0x85/0x150 [ 2399.354816] ? irqentry_exit+0x1d/0x30 [ 2399.355287] ? exc_page_fault+0x7f/0x160 [ 2399.355756] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 2399.356302] RIP: 0033:0x7fe728d26aeb [ 2399.356776] Code: 73 01 c3 48 8b 0d 45 33 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 15 33 0f 00 f7 d8 64 89 01 48 [ 2399.358372] RSP: 002b:00007ffff954d6f8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 2399.359066] RAX: ffffffffffffffda RBX: 00005609156cc760 RCX: 00007fe728d26aeb [ 2399.359779] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005609156cc7c8 [ 2399.360535] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 2399.361261] R10: 00007fe728dbeac0 R11: 0000000000000206 R12: 00007ffff954d950 [ 2399.361952] R13: 00005609156cc2a0 R14: 00007ffff954ee5f R15: 00005609156cc760 [ 2399.362688] </TASK> Fixes: 6607c17 ("net: mana: Enable debugfs files for MANA device") Cc: [email protected] Signed-off-by: Shradha Gupta <[email protected]> Reviewed-by: Michal Swiatkowski <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Jan 26, 2025
This reverts commit eaebeb9. Commit eaebeb9 ("mm: zswap: fix race between [de]compression and CPU hotunplug") used the CPU hotplug lock in zswap compress/decompress operations to protect against a race with CPU hotunplug making some per-CPU resources go away. However, zswap compress/decompress can be reached through reclaim while the lock is held, resulting in a potential deadlock as reported by syzbot: ====================================================== WARNING: possible circular locking dependency detected 6.13.0-rc6-syzkaller-00006-g5428dc1906dd #0 Not tainted ------------------------------------------------------ kswapd0/89 is trying to acquire lock: ffffffff8e7d2ed0 (cpu_hotplug_lock){++++}-{0:0}, at: acomp_ctx_get_cpu mm/zswap.c:886 [inline] ffffffff8e7d2ed0 (cpu_hotplug_lock){++++}-{0:0}, at: zswap_compress mm/zswap.c:908 [inline] ffffffff8e7d2ed0 (cpu_hotplug_lock){++++}-{0:0}, at: zswap_store_page mm/zswap.c:1439 [inline] ffffffff8e7d2ed0 (cpu_hotplug_lock){++++}-{0:0}, at: zswap_store+0xa74/0x1ba0 mm/zswap.c:1546 but task is already holding lock: ffffffff8ea355a0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat mm/vmscan.c:6871 [inline] ffffffff8ea355a0 (fs_reclaim){+.+.}-{0:0}, at: kswapd+0xb58/0x2f30 mm/vmscan.c:7253 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 __fs_reclaim_acquire mm/page_alloc.c:3853 [inline] fs_reclaim_acquire+0x88/0x130 mm/page_alloc.c:3867 might_alloc include/linux/sched/mm.h:318 [inline] slab_pre_alloc_hook mm/slub.c:4070 [inline] slab_alloc_node mm/slub.c:4148 [inline] __kmalloc_cache_node_noprof+0x40/0x3a0 mm/slub.c:4337 kmalloc_node_noprof include/linux/slab.h:924 [inline] alloc_worker kernel/workqueue.c:2638 [inline] create_worker+0x11b/0x720 kernel/workqueue.c:2781 workqueue_prepare_cpu+0xe3/0x170 kernel/workqueue.c:6628 cpuhp_invoke_callback+0x48d/0x830 kernel/cpu.c:194 __cpuhp_invoke_callback_range kernel/cpu.c:965 [inline] cpuhp_invoke_callback_range kernel/cpu.c:989 [inline] cpuhp_up_callbacks kernel/cpu.c:1020 [inline] _cpu_up+0x2b3/0x580 kernel/cpu.c:1690 cpu_up+0x184/0x230 kernel/cpu.c:1722 cpuhp_bringup_mask+0xdf/0x260 kernel/cpu.c:1788 cpuhp_bringup_cpus_parallel+0xf9/0x160 kernel/cpu.c:1878 bringup_nonboot_cpus+0x2b/0x50 kernel/cpu.c:1892 smp_init+0x34/0x150 kernel/smp.c:1009 kernel_init_freeable+0x417/0x5d0 init/main.c:1569 kernel_init+0x1d/0x2b0 init/main.c:1466 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 -> #0 (cpu_hotplug_lock){++++}-{0:0}: check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/locking/lockdep.c:3280 [inline] validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904 __lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 percpu_down_read include/linux/percpu-rwsem.h:51 [inline] cpus_read_lock+0x42/0x150 kernel/cpu.c:490 acomp_ctx_get_cpu mm/zswap.c:886 [inline] zswap_compress mm/zswap.c:908 [inline] zswap_store_page mm/zswap.c:1439 [inline] zswap_store+0xa74/0x1ba0 mm/zswap.c:1546 swap_writepage+0x647/0xce0 mm/page_io.c:279 shmem_writepage+0x1248/0x1610 mm/shmem.c:1579 pageout mm/vmscan.c:696 [inline] shrink_folio_list+0x35ee/0x57e0 mm/vmscan.c:1374 shrink_inactive_list mm/vmscan.c:1967 [inline] shrink_list mm/vmscan.c:2205 [inline] shrink_lruvec+0x16db/0x2f30 mm/vmscan.c:5734 mem_cgroup_shrink_node+0x385/0x8e0 mm/vmscan.c:6575 mem_cgroup_soft_reclaim mm/memcontrol-v1.c:312 [inline] memcg1_soft_limit_reclaim+0x346/0x810 mm/memcontrol-v1.c:362 balance_pgdat mm/vmscan.c:6975 [inline] kswapd+0x17b3/0x2f30 mm/vmscan.c:7253 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(cpu_hotplug_lock); lock(fs_reclaim); rlock(cpu_hotplug_lock); *** DEADLOCK *** 1 lock held by kswapd0/89: #0: ffffffff8ea355a0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat mm/vmscan.c:6871 [inline] #0: ffffffff8ea355a0 (fs_reclaim){+.+.}-{0:0}, at: kswapd+0xb58/0x2f30 mm/vmscan.c:7253 stack backtrace: CPU: 0 UID: 0 PID: 89 Comm: kswapd0 Not tainted 6.13.0-rc6-syzkaller-00006-g5428dc1906dd #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_circular_bug+0x13a/0x1b0 kernel/locking/lockdep.c:2074 check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2206 check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/locking/lockdep.c:3280 [inline] validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904 __lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 percpu_down_read include/linux/percpu-rwsem.h:51 [inline] cpus_read_lock+0x42/0x150 kernel/cpu.c:490 acomp_ctx_get_cpu mm/zswap.c:886 [inline] zswap_compress mm/zswap.c:908 [inline] zswap_store_page mm/zswap.c:1439 [inline] zswap_store+0xa74/0x1ba0 mm/zswap.c:1546 swap_writepage+0x647/0xce0 mm/page_io.c:279 shmem_writepage+0x1248/0x1610 mm/shmem.c:1579 pageout mm/vmscan.c:696 [inline] shrink_folio_list+0x35ee/0x57e0 mm/vmscan.c:1374 shrink_inactive_list mm/vmscan.c:1967 [inline] shrink_list mm/vmscan.c:2205 [inline] shrink_lruvec+0x16db/0x2f30 mm/vmscan.c:5734 mem_cgroup_shrink_node+0x385/0x8e0 mm/vmscan.c:6575 mem_cgroup_soft_reclaim mm/memcontrol-v1.c:312 [inline] memcg1_soft_limit_reclaim+0x346/0x810 mm/memcontrol-v1.c:362 balance_pgdat mm/vmscan.c:6975 [inline] kswapd+0x17b3/0x2f30 mm/vmscan.c:7253 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Revert the change. A different fix for the race with CPU hotunplug will follow. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Yosry Ahmed <[email protected]> Reported-by: syzbot <[email protected]> Cc: Barry Song <[email protected]> Cc: Chengming Zhou <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Kanchana P Sridhar <[email protected]> Cc: Nhat Pham <[email protected]> Cc: Sam Sun <[email protected]> Cc: Vitaly Wool <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Jan 26, 2025
A livepatch module can contain a special relocation section .klp.rela.<objname>.<secname> to apply its relocations at the appropriate time and to additionally access local and unexported symbols. When <objname> points to another module, such relocations are processed separately from the regular module relocation process. For instance, only when the target <objname> actually becomes loaded. With CONFIG_STRICT_MODULE_RWX, when the livepatch core decides to apply these relocations, their processing results in the following bug: [ 25.827238] BUG: unable to handle page fault for address: 00000000000012ba [ 25.827819] #PF: supervisor read access in kernel mode [ 25.828153] #PF: error_code(0x0000) - not-present page [ 25.828588] PGD 0 P4D 0 [ 25.829063] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI [ 25.829742] CPU: 2 UID: 0 PID: 452 Comm: insmod Tainted: G O K 6.13.0-rc4-00078-g059dd502b263 #7820 [ 25.830417] Tainted: [O]=OOT_MODULE, [K]=LIVEPATCH [ 25.830768] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 [ 25.831651] RIP: 0010:memcmp+0x24/0x60 [ 25.832190] Code: [...] [ 25.833378] RSP: 0018:ffffa40b403a3ae8 EFLAGS: 00000246 [ 25.833637] RAX: 0000000000000000 RBX: ffff93bc81d8e700 RCX: ffffffffc0202000 [ 25.834072] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 00000000000012ba [ 25.834548] RBP: ffffa40b403a3b68 R08: ffffa40b403a3b30 R09: 0000004a00000002 [ 25.835088] R10: ffffffffffffd222 R11: f000000000000000 R12: 0000000000000000 [ 25.835666] R13: ffffffffc02032ba R14: ffffffffc007d1e0 R15: 0000000000000004 [ 25.836139] FS: 00007fecef8c3080(0000) GS:ffff93bc8f900000(0000) knlGS:0000000000000000 [ 25.836519] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 25.836977] CR2: 00000000000012ba CR3: 0000000002f24000 CR4: 00000000000006f0 [ 25.837442] Call Trace: [ 25.838297] <TASK> [ 25.841083] __write_relocate_add.constprop.0+0xc7/0x2b0 [ 25.841701] apply_relocate_add+0x75/0xa0 [ 25.841973] klp_write_section_relocs+0x10e/0x140 [ 25.842304] klp_write_object_relocs+0x70/0xa0 [ 25.842682] klp_init_object_loaded+0x21/0xf0 [ 25.842972] klp_enable_patch+0x43d/0x900 [ 25.843572] do_one_initcall+0x4c/0x220 [ 25.844186] do_init_module+0x6a/0x260 [ 25.844423] init_module_from_file+0x9c/0xe0 [ 25.844702] idempotent_init_module+0x172/0x270 [ 25.845008] __x64_sys_finit_module+0x69/0xc0 [ 25.845253] do_syscall_64+0x9e/0x1a0 [ 25.845498] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 25.846056] RIP: 0033:0x7fecef9eb25d [ 25.846444] Code: [...] [ 25.847563] RSP: 002b:00007ffd0c5d6de8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 25.848082] RAX: ffffffffffffffda RBX: 000055b03f05e470 RCX: 00007fecef9eb25d [ 25.848456] RDX: 0000000000000000 RSI: 000055b001e74e52 RDI: 0000000000000003 [ 25.848969] RBP: 00007ffd0c5d6ea0 R08: 0000000000000040 R09: 0000000000004100 [ 25.849411] R10: 00007fecefac7b20 R11: 0000000000000246 R12: 000055b001e74e52 [ 25.849905] R13: 0000000000000000 R14: 000055b03f05e440 R15: 0000000000000000 [ 25.850336] </TASK> [ 25.850553] Modules linked in: deku(OK+) uinput [ 25.851408] CR2: 00000000000012ba [ 25.852085] ---[ end trace 0000000000000000 ]--- The problem is that the .klp.rela.<objname>.<secname> relocations are processed after the module was already formed and mod->rw_copy was reset. However, the code in __write_relocate_add() calls module_writable_address() which translates the target address 'loc' still to 'loc + (mem->rw_copy - mem->base)', with mem->rw_copy now being 0. Fix the problem by returning directly 'loc' in module_writable_address() when the module is already formed. Function __write_relocate_add() knows to use text_poke() in such a case. Link: https://lkml.kernel.org/r/[email protected] Fixes: 0c133b1 ("module: prepare to handle ROX allocations for text") Signed-off-by: Petr Pavlu <[email protected]> Reported-by: Marek Maslanka <[email protected]> Closes: https://lore.kernel.org/linux-modules/CAGcaFA2hdThQV6mjD_1_U+GNHThv84+MQvMWLgEuX+LVbAyDxg@mail.gmail.com/ Reviewed-by: Petr Mladek <[email protected]> Tested-by: Petr Mladek <[email protected]> Cc: Joe Lawrence <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: Luis Chamberlain <[email protected]> Cc: Mike Rapoport (Microsoft) <[email protected]> Cc: Petr Mladek <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Jan 26, 2025
Some of the core functions can only be called if the transport
has been assigned.
As Michal reported, a socket might have the transport at NULL,
for example after a failed connect(), causing the following trace:
BUG: kernel NULL pointer dereference, address: 00000000000000a0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 12faf8067 P4D 12faf8067 PUD 113670067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 15 UID: 0 PID: 1198 Comm: a.out Not tainted 6.13.0-rc2+
RIP: 0010:vsock_connectible_has_data+0x1f/0x40
Call Trace:
vsock_bpf_recvmsg+0xca/0x5e0
sock_recvmsg+0xb9/0xc0
__sys_recvfrom+0xb3/0x130
__x64_sys_recvfrom+0x20/0x30
do_syscall_64+0x93/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
So we need to check the `vsk->transport` in vsock_bpf_recvmsg(),
especially for connected sockets (stream/seqpacket) as we already
do in __vsock_connectible_recvmsg().
Fixes: 634f1a7 ("vsock: support sockmap")
Cc: [email protected]
Reported-by: Michal Luczaj <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Tested-by: Michal Luczaj <[email protected]>
Reported-by: [email protected]
Closes: https://lore.kernel.org/netdev/[email protected]/
Tested-by: [email protected]
Reviewed-by: Hyunwoo Kim <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Luigi Leonardi <[email protected]>
Signed-off-by: Stefano Garzarella <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Jan 26, 2025
irq_chip functions may be called in raw spinlock context. Therefore, we must also use a raw spinlock for our own internal locking. This fixes the following lockdep splat: [ 5.349336] ============================= [ 5.353349] [ BUG: Invalid wait context ] [ 5.357361] 6.13.0-rc5+ torvalds#69 Tainted: G W [ 5.363031] ----------------------------- [ 5.367045] kworker/u17:1/44 is trying to lock: [ 5.371587] ffffff88018b02c0 (&chip->gpio_lock){....}-{3:3}, at: xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8)) [ 5.380079] other info that might help us debug this: [ 5.385138] context-{5:5} [ 5.387762] 5 locks held by kworker/u17:1/44: [ 5.392123] #0: ffffff8800014958 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3204) [ 5.402260] #1: ffffffc082fcbdd8 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work (kernel/workqueue.c:3205) [ 5.411528] #2: ffffff880172c900 (&dev->mutex){....}-{4:4}, at: __device_attach (drivers/base/dd.c:1006) [ 5.419929] #3: ffffff88039c8268 (request_class#2){+.+.}-{4:4}, at: __setup_irq (kernel/irq/internals.h:156 kernel/irq/manage.c:1596) [ 5.428331] #4: ffffff88039c80c8 (lock_class#2){....}-{2:2}, at: __setup_irq (kernel/irq/manage.c:1614) [ 5.436472] stack backtrace: [ 5.439359] CPU: 2 UID: 0 PID: 44 Comm: kworker/u17:1 Tainted: G W 6.13.0-rc5+ torvalds#69 [ 5.448690] Tainted: [W]=WARN [ 5.451656] Hardware name: xlnx,zynqmp (DT) [ 5.455845] Workqueue: events_unbound deferred_probe_work_func [ 5.461699] Call trace: [ 5.464147] show_stack+0x18/0x24 C [ 5.467821] dump_stack_lvl (lib/dump_stack.c:123) [ 5.471501] dump_stack (lib/dump_stack.c:130) [ 5.474824] __lock_acquire (kernel/locking/lockdep.c:4828 kernel/locking/lockdep.c:4898 kernel/locking/lockdep.c:5176) [ 5.478758] lock_acquire (arch/arm64/include/asm/percpu.h:40 kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5851 kernel/locking/lockdep.c:5814) [ 5.482429] _raw_spin_lock_irqsave (include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162) [ 5.486797] xgpio_irq_unmask (drivers/gpio/gpio-xilinx.c:433 (discriminator 8)) [ 5.490737] irq_enable (kernel/irq/internals.h:236 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) [ 5.494060] __irq_startup (kernel/irq/internals.h:241 kernel/irq/chip.c:180 kernel/irq/chip.c:250) [ 5.497645] irq_startup (kernel/irq/chip.c:270) [ 5.501143] __setup_irq (kernel/irq/manage.c:1807) [ 5.504728] request_threaded_irq (kernel/irq/manage.c:2208) Fixes: a32c7ca ("gpio: gpio-xilinx: Add interrupt support") Signed-off-by: Sean Anderson <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bartosz Golaszewski <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Jan 26, 2025
This commit addresses a circular locking dependency issue within the GFX isolation mechanism. The problem was identified by a warning indicating a potential deadlock due to inconsistent lock acquisition order. - The `amdgpu_gfx_enforce_isolation_ring_begin_use` and `amdgpu_gfx_enforce_isolation_ring_end_use` functions previously acquired `enforce_isolation_mutex` and called `amdgpu_gfx_kfd_sch_ctrl`, leading to potential deadlocks. ie., If `amdgpu_gfx_kfd_sch_ctrl` is called while `enforce_isolation_mutex` is held, and `amdgpu_gfx_enforce_isolation_handler` is called while `kfd_sch_mutex` is held, it can create a circular dependency. By ensuring consistent lock usage, this fix resolves the issue: [ 606.297333] ====================================================== [ 606.297343] WARNING: possible circular locking dependency detected [ 606.297353] 6.10.0-amd-mlkd-610-311224-lof torvalds#19 Tainted: G OE [ 606.297365] ------------------------------------------------------ [ 606.297375] kworker/u96:3/3825 is trying to acquire lock: [ 606.297385] ffff9aa64e431cb8 ((work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work)){+.+.}-{0:0}, at: __flush_work+0x232/0x610 [ 606.297413] but task is already holding lock: [ 606.297423] ffff9aa64e432338 (&adev->gfx.kfd_sch_mutex){+.+.}-{3:3}, at: amdgpu_gfx_kfd_sch_ctrl+0x51/0x4d0 [amdgpu] [ 606.297725] which lock already depends on the new lock. [ 606.297738] the existing dependency chain (in reverse order) is: [ 606.297749] -> #2 (&adev->gfx.kfd_sch_mutex){+.+.}-{3:3}: [ 606.297765] __mutex_lock+0x85/0x930 [ 606.297776] mutex_lock_nested+0x1b/0x30 [ 606.297786] amdgpu_gfx_kfd_sch_ctrl+0x51/0x4d0 [amdgpu] [ 606.298007] amdgpu_gfx_enforce_isolation_ring_begin_use+0x2a4/0x5d0 [amdgpu] [ 606.298225] amdgpu_ring_alloc+0x48/0x70 [amdgpu] [ 606.298412] amdgpu_ib_schedule+0x176/0x8a0 [amdgpu] [ 606.298603] amdgpu_job_run+0xac/0x1e0 [amdgpu] [ 606.298866] drm_sched_run_job_work+0x24f/0x430 [gpu_sched] [ 606.298880] process_one_work+0x21e/0x680 [ 606.298890] worker_thread+0x190/0x350 [ 606.298899] kthread+0xe7/0x120 [ 606.298908] ret_from_fork+0x3c/0x60 [ 606.298919] ret_from_fork_asm+0x1a/0x30 [ 606.298929] -> #1 (&adev->enforce_isolation_mutex){+.+.}-{3:3}: [ 606.298947] __mutex_lock+0x85/0x930 [ 606.298956] mutex_lock_nested+0x1b/0x30 [ 606.298966] amdgpu_gfx_enforce_isolation_handler+0x87/0x370 [amdgpu] [ 606.299190] process_one_work+0x21e/0x680 [ 606.299199] worker_thread+0x190/0x350 [ 606.299208] kthread+0xe7/0x120 [ 606.299217] ret_from_fork+0x3c/0x60 [ 606.299227] ret_from_fork_asm+0x1a/0x30 [ 606.299236] -> #0 ((work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work)){+.+.}-{0:0}: [ 606.299257] __lock_acquire+0x16f9/0x2810 [ 606.299267] lock_acquire+0xd1/0x300 [ 606.299276] __flush_work+0x250/0x610 [ 606.299286] cancel_delayed_work_sync+0x71/0x80 [ 606.299296] amdgpu_gfx_kfd_sch_ctrl+0x287/0x4d0 [amdgpu] [ 606.299509] amdgpu_gfx_enforce_isolation_ring_begin_use+0x2a4/0x5d0 [amdgpu] [ 606.299723] amdgpu_ring_alloc+0x48/0x70 [amdgpu] [ 606.299909] amdgpu_ib_schedule+0x176/0x8a0 [amdgpu] [ 606.300101] amdgpu_job_run+0xac/0x1e0 [amdgpu] [ 606.300355] drm_sched_run_job_work+0x24f/0x430 [gpu_sched] [ 606.300369] process_one_work+0x21e/0x680 [ 606.300378] worker_thread+0x190/0x350 [ 606.300387] kthread+0xe7/0x120 [ 606.300396] ret_from_fork+0x3c/0x60 [ 606.300406] ret_from_fork_asm+0x1a/0x30 [ 606.300416] other info that might help us debug this: [ 606.300428] Chain exists of: (work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work) --> &adev->enforce_isolation_mutex --> &adev->gfx.kfd_sch_mutex [ 606.300458] Possible unsafe locking scenario: [ 606.300468] CPU0 CPU1 [ 606.300476] ---- ---- [ 606.300484] lock(&adev->gfx.kfd_sch_mutex); [ 606.300494] lock(&adev->enforce_isolation_mutex); [ 606.300508] lock(&adev->gfx.kfd_sch_mutex); [ 606.300521] lock((work_completion)(&(&adev->gfx.enforce_isolation[i].work)->work)); [ 606.300536] *** DEADLOCK *** [ 606.300546] 5 locks held by kworker/u96:3/3825: [ 606.300555] #0: ffff9aa5aa1f5d58 ((wq_completion)comp_1.1.0){+.+.}-{0:0}, at: process_one_work+0x3f5/0x680 [ 606.300577] #1: ffffaa53c3c97e40 ((work_completion)(&sched->work_run_job)){+.+.}-{0:0}, at: process_one_work+0x1d6/0x680 [ 606.300600] #2: ffff9aa64e463c98 (&adev->enforce_isolation_mutex){+.+.}-{3:3}, at: amdgpu_gfx_enforce_isolation_ring_begin_use+0x1c3/0x5d0 [amdgpu] [ 606.300837] #3: ffff9aa64e432338 (&adev->gfx.kfd_sch_mutex){+.+.}-{3:3}, at: amdgpu_gfx_kfd_sch_ctrl+0x51/0x4d0 [amdgpu] [ 606.301062] #4: ffffffff8c1a5660 (rcu_read_lock){....}-{1:2}, at: __flush_work+0x70/0x610 [ 606.301083] stack backtrace: [ 606.301092] CPU: 14 PID: 3825 Comm: kworker/u96:3 Tainted: G OE 6.10.0-amd-mlkd-610-311224-lof torvalds#19 [ 606.301109] Hardware name: Gigabyte Technology Co., Ltd. X570S GAMING X/X570S GAMING X, BIOS F7 03/22/2024 [ 606.301124] Workqueue: comp_1.1.0 drm_sched_run_job_work [gpu_sched] [ 606.301140] Call Trace: [ 606.301146] <TASK> [ 606.301154] dump_stack_lvl+0x9b/0xf0 [ 606.301166] dump_stack+0x10/0x20 [ 606.301175] print_circular_bug+0x26c/0x340 [ 606.301187] check_noncircular+0x157/0x170 [ 606.301197] ? register_lock_class+0x48/0x490 [ 606.301213] __lock_acquire+0x16f9/0x2810 [ 606.301230] lock_acquire+0xd1/0x300 [ 606.301239] ? __flush_work+0x232/0x610 [ 606.301250] ? srso_alias_return_thunk+0x5/0xfbef5 [ 606.301261] ? mark_held_locks+0x54/0x90 [ 606.301274] ? __flush_work+0x232/0x610 [ 606.301284] __flush_work+0x250/0x610 [ 606.301293] ? __flush_work+0x232/0x610 [ 606.301305] ? __pfx_wq_barrier_func+0x10/0x10 [ 606.301318] ? mark_held_locks+0x54/0x90 [ 606.301331] ? srso_alias_return_thunk+0x5/0xfbef5 [ 606.301345] cancel_delayed_work_sync+0x71/0x80 [ 606.301356] amdgpu_gfx_kfd_sch_ctrl+0x287/0x4d0 [amdgpu] [ 606.301661] amdgpu_gfx_enforce_isolation_ring_begin_use+0x2a4/0x5d0 [amdgpu] [ 606.302050] ? srso_alias_return_thunk+0x5/0xfbef5 [ 606.302069] amdgpu_ring_alloc+0x48/0x70 [amdgpu] [ 606.302452] amdgpu_ib_schedule+0x176/0x8a0 [amdgpu] [ 606.302862] ? drm_sched_entity_error+0x82/0x190 [gpu_sched] [ 606.302890] amdgpu_job_run+0xac/0x1e0 [amdgpu] [ 606.303366] drm_sched_run_job_work+0x24f/0x430 [gpu_sched] [ 606.303388] process_one_work+0x21e/0x680 [ 606.303409] worker_thread+0x190/0x350 [ 606.303424] ? __pfx_worker_thread+0x10/0x10 [ 606.303437] kthread+0xe7/0x120 [ 606.303449] ? __pfx_kthread+0x10/0x10 [ 606.303463] ret_from_fork+0x3c/0x60 [ 606.303476] ? __pfx_kthread+0x10/0x10 [ 606.303489] ret_from_fork_asm+0x1a/0x30 [ 606.303512] </TASK> v2: Refactor lock handling to resolve circular dependency (Alex) - Introduced a `sched_work` flag to defer the call to `amdgpu_gfx_kfd_sch_ctrl` until after releasing `enforce_isolation_mutex`. - This change ensures that `amdgpu_gfx_kfd_sch_ctrl` is called outside the critical section, preventing the circular dependency and deadlock. - The `sched_work` flag is set within the mutex-protected section if conditions are met, and the actual function call is made afterward. - This approach ensures consistent lock acquisition order. Fixes: afefd6f ("drm/amdgpu: Implement Enforce Isolation Handler for KGD/KFD serialization") Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Suggested-by: Alex Deucher <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> (cherry picked from commit 0b6b2dd) Cc: [email protected]
z3ntu
pushed a commit
that referenced
this pull request
Jan 26, 2025
syzkaller reported such a BUG_ON(): ------------[ cut here ]------------ kernel BUG at mm/khugepaged.c:1835! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP ... CPU: 6 UID: 0 PID: 8009 Comm: syz.15.106 Kdump: loaded Tainted: G W 6.13.0-rc6 torvalds#22 Tainted: [W]=WARN Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : collapse_file+0xa44/0x1400 lr : collapse_file+0x88/0x1400 sp : ffff80008afe3a60 ... Call trace: collapse_file+0xa44/0x1400 (P) hpage_collapse_scan_file+0x278/0x400 madvise_collapse+0x1bc/0x678 madvise_vma_behavior+0x32c/0x448 madvise_walk_vmas.constprop.0+0xbc/0x140 do_madvise.part.0+0xdc/0x2c8 __arm64_sys_madvise+0x68/0x88 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x34/0x128 el0t_64_sync_handler+0xc8/0xd0 el0t_64_sync+0x190/0x198 This indicates that the pgoff is unaligned. After analysis, I confirm the vma is mapped to /dev/zero. Such a vma certainly has vm_file, but it is set to anonymous by mmap_zero(). So even if it's mmapped by 2m-unaligned, it can pass the check in thp_vma_allowable_order() as it is an anonymous-mmap, but then be collapsed as a file-mmap. It seems the problem has existed for a long time, but actually, since we have khugepaged_max_ptes_none check before, we will skip collapse it as it is /dev/zero and so has no present page. But commit d8ea7cc limit the check for only khugepaged, so the BUG_ON() can be triggered by madvise_collapse(). Add vma_is_anonymous() check to make such vma be processed by hpage_collapse_scan_pmd(). Link: https://lkml.kernel.org/r/[email protected] Fixes: d8ea7cc ("mm/khugepaged: add flag to predicate khugepaged-only behavior") Signed-off-by: Liu Shixin <[email protected]> Reviewed-by: Yang Shi <[email protected]> Acked-by: David Hildenbrand <[email protected]> Cc: Chengming Zhou <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Kefeng Wang <[email protected]> Cc: Mattew Wilcox <[email protected]> Cc: Muchun Song <[email protected]> Cc: Nanyong Sun <[email protected]> Cc: Qi Zheng <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Jan 26, 2025
syz reports an out of bounds read: ================================================================== BUG: KASAN: slab-out-of-bounds in ocfs2_match fs/ocfs2/dir.c:334 [inline] BUG: KASAN: slab-out-of-bounds in ocfs2_search_dirblock+0x283/0x6e0 fs/ocfs2/dir.c:367 Read of size 1 at addr ffff88804d8b9982 by task syz-executor.2/14802 CPU: 0 UID: 0 PID: 14802 Comm: syz-executor.2 Not tainted 6.13.0-rc4 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Sched_ext: serialise (enabled+all), task: runnable_at=-10ms Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x229/0x350 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x164/0x530 mm/kasan/report.c:489 kasan_report+0x147/0x180 mm/kasan/report.c:602 ocfs2_match fs/ocfs2/dir.c:334 [inline] ocfs2_search_dirblock+0x283/0x6e0 fs/ocfs2/dir.c:367 ocfs2_find_entry_id fs/ocfs2/dir.c:414 [inline] ocfs2_find_entry+0x1143/0x2db0 fs/ocfs2/dir.c:1078 ocfs2_find_files_on_disk+0x18e/0x530 fs/ocfs2/dir.c:1981 ocfs2_lookup_ino_from_name+0xb6/0x110 fs/ocfs2/dir.c:2003 ocfs2_lookup+0x30a/0xd40 fs/ocfs2/namei.c:122 lookup_open fs/namei.c:3627 [inline] open_last_lookups fs/namei.c:3748 [inline] path_openat+0x145a/0x3870 fs/namei.c:3984 do_filp_open+0xe9/0x1c0 fs/namei.c:4014 do_sys_openat2+0x135/0x1d0 fs/open.c:1402 do_sys_open fs/open.c:1417 [inline] __do_sys_openat fs/open.c:1433 [inline] __se_sys_openat fs/open.c:1428 [inline] __x64_sys_openat+0x15d/0x1c0 fs/open.c:1428 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf6/0x210 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f01076903ad Code: c3 e8 a7 2b 00 00 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f01084acfc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 00007f01077cbf80 RCX: 00007f01076903ad RDX: 0000000000105042 RSI: 0000000020000080 RDI: ffffffffffffff9c RBP: 00007f01077cbf80 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000001ff R11: 0000000000000246 R12: 0000000000000000 R13: 00007f01077cbf80 R14: 00007f010764fc90 R15: 00007f010848d000 </TASK> ================================================================== And a general protection fault in ocfs2_prepare_dir_for_insert: ================================================================== loop0: detected capacity change from 0 to 32768 JBD2: Ignoring recovery information on journal ocfs2: Mounting device (7,0) on (node local, slot 0) with ordered data mode. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 UID: 0 PID: 5096 Comm: syz-executor792 Not tainted 6.11.0-rc4-syzkaller-00002-gb0da640826ba #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:ocfs2_find_dir_space_id fs/ocfs2/dir.c:3406 [inline] RIP: 0010:ocfs2_prepare_dir_for_insert+0x3309/0x5c70 fs/ocfs2/dir.c:4280 Code: 00 00 e8 2a 25 13 fe e9 ba 06 00 00 e8 20 25 13 fe e9 4f 01 00 00 e8 16 25 13 fe 49 8d 7f 08 49 8d 5f 09 48 89 f8 48 c1 e8 03 <42> 0f b6 04 20 84 c0 0f 85 bd 23 00 00 48 89 d8 48 c1 e8 03 42 0f RSP: 0018:ffffc9000af9f020 EFLAGS: 00010202 RAX: 0000000000000001 RBX: 0000000000000009 RCX: ffff88801e27a440 RDX: 0000000000000000 RSI: 0000000000000400 RDI: 0000000000000008 RBP: ffffc9000af9f830 R08: ffffffff8380395b R09: ffffffff838090a7 R10: 0000000000000002 R11: ffff88801e27a440 R12: dffffc0000000000 R13: ffff88803c660878 R14: f700000000000088 R15: 0000000000000000 FS: 000055555a677380(0000) GS:ffff888020800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000560bce569178 CR3: 000000001de5a000 CR4: 0000000000350ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ocfs2_mknod+0xcaf/0x2b40 fs/ocfs2/namei.c:292 vfs_mknod+0x36d/0x3b0 fs/namei.c:4088 do_mknodat+0x3ec/0x5b0 __do_sys_mknodat fs/namei.c:4166 [inline] __se_sys_mknodat fs/namei.c:4163 [inline] __x64_sys_mknodat+0xa7/0xc0 fs/namei.c:4163 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f2dafda3a99 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe336a6658 EFLAGS: 00000246 ORIG_RAX: 0000000000000103 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f2dafda3a99 RDX: 00000000000021c0 RSI: 0000000020000040 RDI: 00000000ffffff9c RBP: 00007f2dafe1b5f0 R08: 0000000000004480 R09: 000055555a6784c0 R10: 0000000000000103 R11: 0000000000000246 R12: 00007ffe336a6680 R13: 00007ffe336a68a8 R14: 431bde82d7b634db R15: 00007f2dafdec03b </TASK> ================================================================== The two reports are all caused invalid negative i_size of dir inode. For ocfs2, dir_inode can't be negative or zero. Here add a check in which is called by ocfs2_check_dir_for_entry(). It fixes the second report as ocfs2_check_dir_for_entry() must be called before ocfs2_prepare_dir_for_insert(). Also set a up limit for dir with OCFS2_INLINE_DATA_FL. The i_size can't be great than blocksize. Link: https://lkml.kernel.org/r/[email protected] Reported-by: Jiacheng Xu <[email protected]> Link: https://lore.kernel.org/ocfs2-devel/[email protected]/T/#u Reported-by: [email protected] Link: https://lore.kernel.org/all/[email protected]/T/ Signed-off-by: Su Yue <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Jun Piao <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Jan 26, 2025
Fix a lockdep warning [1] observed during the write combining test.
The warning indicates a potential nested lock scenario that could lead
to a deadlock.
However, this is a false positive alarm because the SF lock and its
parent lock are distinct ones.
The lockdep confusion arises because the locks belong to the same object
class (i.e., struct mlx5_core_dev).
To resolve this, the code has been refactored to avoid taking both
locks. Instead, only the parent lock is acquired.
[1]
raw_ethernet_bw/2118 is trying to acquire lock:
[ 213.619032] ffff88811dd75e08 (&dev->wc_state_lock){+.+.}-{3:3}, at:
mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.620270]
[ 213.620270] but task is already holding lock:
[ 213.620943] ffff88810b585e08 (&dev->wc_state_lock){+.+.}-{3:3}, at:
mlx5_wc_support_get+0x10c/0x210 [mlx5_core]
[ 213.622045]
[ 213.622045] other info that might help us debug this:
[ 213.622778] Possible unsafe locking scenario:
[ 213.622778]
[ 213.623465] CPU0
[ 213.623815] ----
[ 213.624148] lock(&dev->wc_state_lock);
[ 213.624615] lock(&dev->wc_state_lock);
[ 213.625071]
[ 213.625071] *** DEADLOCK ***
[ 213.625071]
[ 213.625805] May be due to missing lock nesting notation
[ 213.625805]
[ 213.626522] 4 locks held by raw_ethernet_bw/2118:
[ 213.627019] #0: ffff88813f80d578 (&uverbs_dev->disassociate_srcu){.+.+}-{0:0},
at: ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs]
[ 213.628088] #1: ffff88810fb23930 (&file->hw_destroy_rwsem){.+.+}-{3:3},
at: ib_init_ucontext+0x2d/0xf0 [ib_uverbs]
[ 213.629094] #2: ffff88810fb23878 (&file->ucontext_lock){+.+.}-{3:3},
at: ib_init_ucontext+0x49/0xf0 [ib_uverbs]
[ 213.630106] #3: ffff88810b585e08 (&dev->wc_state_lock){+.+.}-{3:3},
at: mlx5_wc_support_get+0x10c/0x210 [mlx5_core]
[ 213.631185]
[ 213.631185] stack backtrace:
[ 213.631718] CPU: 1 UID: 0 PID: 2118 Comm: raw_ethernet_bw Not tainted
6.12.0-rc7_internal_net_next_mlx5_89a0ad0 #1
[ 213.632722] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 213.633785] Call Trace:
[ 213.634099]
[ 213.634393] dump_stack_lvl+0x7e/0xc0
[ 213.634806] print_deadlock_bug+0x278/0x3c0
[ 213.635265] __lock_acquire+0x15f4/0x2c40
[ 213.635712] lock_acquire+0xcd/0x2d0
[ 213.636120] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.636722] ? mlx5_ib_enable_lb+0x24/0xa0 [mlx5_ib]
[ 213.637277] __mutex_lock+0x81/0xda0
[ 213.637697] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.638305] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.638902] ? rcu_read_lock_sched_held+0x3f/0x70
[ 213.639400] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.640016] mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.640615] set_ucontext_resp+0x68/0x2b0 [mlx5_ib]
[ 213.641144] ? debug_mutex_init+0x33/0x40
[ 213.641586] mlx5_ib_alloc_ucontext+0x18e/0x7b0 [mlx5_ib]
[ 213.642145] ib_init_ucontext+0xa0/0xf0 [ib_uverbs]
[ 213.642679] ib_uverbs_handler_UVERBS_METHOD_GET_CONTEXT+0x95/0xc0
[ib_uverbs]
[ 213.643426] ? _copy_from_user+0x46/0x80
[ 213.643878] ib_uverbs_cmd_verbs+0xa6b/0xc80 [ib_uverbs]
[ 213.644426] ? ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x130/0x130
[ib_uverbs]
[ 213.645213] ? __lock_acquire+0xa99/0x2c40
[ 213.645675] ? lock_acquire+0xcd/0x2d0
[ 213.646101] ? ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs]
[ 213.646625] ? reacquire_held_locks+0xcf/0x1f0
[ 213.647102] ? do_user_addr_fault+0x45d/0x770
[ 213.647586] ib_uverbs_ioctl+0xe0/0x170 [ib_uverbs]
[ 213.648102] ? ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs]
[ 213.648632] __x64_sys_ioctl+0x4d3/0xaa0
[ 213.649060] ? do_user_addr_fault+0x4a8/0x770
[ 213.649528] do_syscall_64+0x6d/0x140
[ 213.649947] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 213.650478] RIP: 0033:0x7fa179b0737b
[ 213.650893] Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c
89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8
10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d
7d 2a 0f 00 f7 d8 64 89 01 48
[ 213.652619] RSP: 002b:00007ffd2e6d46e8 EFLAGS: 00000246 ORIG_RAX:
0000000000000010
[ 213.653390] RAX: ffffffffffffffda RBX: 00007ffd2e6d47f8 RCX:
00007fa179b0737b
[ 213.654084] RDX: 00007ffd2e6d47e0 RSI: 00000000c0181b01 RDI:
0000000000000003
[ 213.654767] RBP: 00007ffd2e6d47c0 R08: 00007fa1799be010 R09:
0000000000000002
[ 213.655453] R10: 00007ffd2e6d4960 R11: 0000000000000246 R12:
00007ffd2e6d487c
[ 213.656170] R13: 0000000000000027 R14: 0000000000000001 R15:
00007ffd2e6d4f70
Fixes: d98995b ("net/mlx5: Reimplement write combining test")
Signed-off-by: Yishai Hadas <[email protected]>
Reviewed-by: Michael Guralnik <[email protected]>
Reviewed-by: Larysa Zaremba <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Jan 26, 2025
Clear the port select structure on error so no stale values left after
definers are destroyed. That's because the mlx5_lag_destroy_definers()
always try to destroy all lag definers in the tt_map, so in the flow
below lag definers get double-destroyed and cause kernel crash:
mlx5_lag_port_sel_create()
mlx5_lag_create_definers()
mlx5_lag_create_definer() <- Failed on tt 1
mlx5_lag_destroy_definers() <- definers[tt=0] gets destroyed
mlx5_lag_port_sel_create()
mlx5_lag_create_definers()
mlx5_lag_create_definer() <- Failed on tt 0
mlx5_lag_destroy_definers() <- definers[tt=0] gets double-destroyed
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 64k pages, 48-bit VAs, pgdp=0000000112ce2e00
[0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
Modules linked in: iptable_raw bonding ip_gre ip6_gre gre ip6_tunnel tunnel6 geneve ip6_udp_tunnel udp_tunnel ipip tunnel4 ip_tunnel rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) mlx5_fwctl(OE) fwctl(OE) mlx5_core(OE) mlxdevm(OE) ib_core(OE) mlxfw(OE) memtrack(OE) mlx_compat(OE) openvswitch nsh nf_conncount psample xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc netconsole overlay efi_pstore sch_fq_codel zram ip_tables crct10dif_ce qemu_fw_cfg fuse ipv6 crc_ccitt [last unloaded: mlx_compat(OE)]
CPU: 3 UID: 0 PID: 217 Comm: kworker/u53:2 Tainted: G OE 6.11.0+ #2
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core]
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core]
lr : mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core]
sp : ffff800085fafb00
x29: ffff800085fafb00 x28: ffff0000da0c8000 x27: 0000000000000000
x26: ffff0000da0c8000 x25: ffff0000da0c8000 x24: ffff0000da0c8000
x23: ffff0000c31f81a0 x22: 0400000000000000 x21: ffff0000da0c8000
x20: 0000000000000000 x19: 0000000000000001 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8b0c9350
x14: 0000000000000000 x13: ffff800081390d18 x12: ffff800081dc3cc0
x11: 0000000000000001 x10: 0000000000000b10 x9 : ffff80007ab7304c
x8 : ffff0000d00711f0 x7 : 0000000000000004 x6 : 0000000000000190
x5 : ffff00027edb3010 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff0000d39b8000 x1 : ffff0000d39b8000 x0 : 0400000000000000
Call trace:
mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core]
mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core]
mlx5_lag_destroy_definers+0xa0/0x108 [mlx5_core]
mlx5_lag_port_sel_create+0x2d4/0x6f8 [mlx5_core]
mlx5_activate_lag+0x60c/0x6f8 [mlx5_core]
mlx5_do_bond_work+0x284/0x5c8 [mlx5_core]
process_one_work+0x170/0x3e0
worker_thread+0x2d8/0x3e0
kthread+0x11c/0x128
ret_from_fork+0x10/0x20
Code: a9025bf5 aa0003f6 a90363f7 f90023f9 (f9400400)
---[ end trace 0000000000000000 ]---
Fixes: dc48516 ("net/mlx5: Lag, add support to create definers for LAG")
Signed-off-by: Mark Zhang <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Reviewed-by: Mark Bloch <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Jan 26, 2025
Attempt to enable IPsec packet offload in tunnel mode in debug kernel
generates the following kernel panic, which is happening due to two
issues:
1. In SA add section, the should be _bh() variant when marking SA mode.
2. There is not needed flush_workqueue in SA delete routine. It is not
needed as at this stage as it is removed from SADB and the running work
will be canceled later in SA free.
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
6.12.0+ #4 Not tainted
-----------------------------------------------------
charon/1337 [HC0[0]:SC0[4]:HE1:SE0] is trying to acquire:
ffff88810f365020 (&xa->xa_lock#24){+.+.}-{3:3}, at: mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core]
and this task is already holding:
ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30
which would create a new lock dependency:
(&x->lock){+.-.}-{3:3} -> (&xa->xa_lock#24){+.+.}-{3:3}
but this new dependency connects a SOFTIRQ-irq-safe lock:
(&x->lock){+.-.}-{3:3}
... which became SOFTIRQ-irq-safe at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
xfrm_timer_handler+0x91/0xd70
__hrtimer_run_queues+0x1dd/0xa60
hrtimer_run_softirq+0x146/0x2e0
handle_softirqs+0x266/0x860
irq_exit_rcu+0x115/0x1a0
sysvec_apic_timer_interrupt+0x6e/0x90
asm_sysvec_apic_timer_interrupt+0x16/0x20
default_idle+0x13/0x20
default_idle_call+0x67/0xa0
do_idle+0x2da/0x320
cpu_startup_entry+0x50/0x60
start_secondary+0x213/0x2a0
common_startup_64+0x129/0x138
to a SOFTIRQ-irq-unsafe lock:
(&xa->xa_lock#24){+.+.}-{3:3}
... which became SOFTIRQ-irq-unsafe at:
...
lock_acquire+0x1be/0x520
_raw_spin_lock+0x2c/0x40
xa_set_mark+0x70/0x110
mlx5e_xfrm_add_state+0xe48/0x2290 [mlx5_core]
xfrm_dev_state_add+0x3bb/0xd70
xfrm_add_sa+0x2451/0x4a90
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&xa->xa_lock#24);
local_irq_disable();
lock(&x->lock);
lock(&xa->xa_lock#24);
<Interrupt>
lock(&x->lock);
*** DEADLOCK ***
2 locks held by charon/1337:
#0: ffffffff87f8f858 (&net->xfrm.xfrm_cfg_mutex){+.+.}-{4:4}, at: xfrm_netlink_rcv+0x5e/0x90
#1: ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30
the dependencies between SOFTIRQ-irq-safe lock and the holding lock:
-> (&x->lock){+.-.}-{3:3} ops: 29 {
HARDIRQ-ON-W at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
xfrm_alloc_spi+0xc0/0xe60
xfrm_alloc_userspi+0x5f6/0xbc0
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
IN-SOFTIRQ-W at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
xfrm_timer_handler+0x91/0xd70
__hrtimer_run_queues+0x1dd/0xa60
hrtimer_run_softirq+0x146/0x2e0
handle_softirqs+0x266/0x860
irq_exit_rcu+0x115/0x1a0
sysvec_apic_timer_interrupt+0x6e/0x90
asm_sysvec_apic_timer_interrupt+0x16/0x20
default_idle+0x13/0x20
default_idle_call+0x67/0xa0
do_idle+0x2da/0x320
cpu_startup_entry+0x50/0x60
start_secondary+0x213/0x2a0
common_startup_64+0x129/0x138
INITIAL USE at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
xfrm_alloc_spi+0xc0/0xe60
xfrm_alloc_userspi+0x5f6/0xbc0
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
}
... key at: [<ffffffff87f9cd20>] __key.18+0x0/0x40
the dependencies between the lock to be acquired
and SOFTIRQ-irq-unsafe lock:
-> (&xa->xa_lock#24){+.+.}-{3:3} ops: 9 {
HARDIRQ-ON-W at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
mlx5e_xfrm_add_state+0xc5b/0x2290 [mlx5_core]
xfrm_dev_state_add+0x3bb/0xd70
xfrm_add_sa+0x2451/0x4a90
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
SOFTIRQ-ON-W at:
lock_acquire+0x1be/0x520
_raw_spin_lock+0x2c/0x40
xa_set_mark+0x70/0x110
mlx5e_xfrm_add_state+0xe48/0x2290 [mlx5_core]
xfrm_dev_state_add+0x3bb/0xd70
xfrm_add_sa+0x2451/0x4a90
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
INITIAL USE at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
mlx5e_xfrm_add_state+0xc5b/0x2290 [mlx5_core]
xfrm_dev_state_add+0x3bb/0xd70
xfrm_add_sa+0x2451/0x4a90
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
}
... key at: [<ffffffffa078ff60>] __key.48+0x0/0xfffffffffff210a0 [mlx5_core]
... acquired at:
__lock_acquire+0x30a0/0x5040
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core]
xfrm_dev_state_delete+0x90/0x160
__xfrm_state_delete+0x662/0xae0
xfrm_state_delete+0x1e/0x30
xfrm_del_sa+0x1c2/0x340
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
stack backtrace:
CPU: 7 UID: 0 PID: 1337 Comm: charon Not tainted 6.12.0+ #4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x74/0xd0
check_irq_usage+0x12e8/0x1d90
? print_shortest_lock_dependencies_backwards+0x1b0/0x1b0
? check_chain_key+0x1bb/0x4c0
? __lockdep_reset_lock+0x180/0x180
? check_path.constprop.0+0x24/0x50
? mark_lock+0x108/0x2fb0
? print_circular_bug+0x9b0/0x9b0
? mark_lock+0x108/0x2fb0
? print_usage_bug.part.0+0x670/0x670
? check_prev_add+0x1c4/0x2310
check_prev_add+0x1c4/0x2310
__lock_acquire+0x30a0/0x5040
? lockdep_set_lock_cmp_fn+0x190/0x190
? lockdep_set_lock_cmp_fn+0x190/0x190
lock_acquire+0x1be/0x520
? mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core]
? lockdep_hardirqs_on_prepare+0x400/0x400
? __xfrm_state_delete+0x5f0/0xae0
? lock_downgrade+0x6b0/0x6b0
_raw_spin_lock_bh+0x34/0x40
? mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core]
mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core]
xfrm_dev_state_delete+0x90/0x160
__xfrm_state_delete+0x662/0xae0
xfrm_state_delete+0x1e/0x30
xfrm_del_sa+0x1c2/0x340
? xfrm_get_sa+0x250/0x250
? check_chain_key+0x1bb/0x4c0
xfrm_user_rcv_msg+0x493/0x880
? copy_sec_ctx+0x270/0x270
? check_chain_key+0x1bb/0x4c0
? lockdep_set_lock_cmp_fn+0x190/0x190
? lockdep_set_lock_cmp_fn+0x190/0x190
netlink_rcv_skb+0x12e/0x380
? copy_sec_ctx+0x270/0x270
? netlink_ack+0xd90/0xd90
? netlink_deliver_tap+0xcd/0xb60
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
? netlink_attachskb+0x730/0x730
? lock_acquire+0x1be/0x520
netlink_sendmsg+0x745/0xbe0
? netlink_unicast+0x740/0x740
? __might_fault+0xbb/0x170
? netlink_unicast+0x740/0x740
__sock_sendmsg+0xc5/0x190
? fdget+0x163/0x1d0
__sys_sendto+0x1fe/0x2c0
? __x64_sys_getpeername+0xb0/0xb0
? do_user_addr_fault+0x856/0xe30
? lock_acquire+0x1be/0x520
? __task_pid_nr_ns+0x117/0x410
? lock_downgrade+0x6b0/0x6b0
__x64_sys_sendto+0xdc/0x1b0
? lockdep_hardirqs_on_prepare+0x284/0x400
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f7d31291ba4
Code: 7d e8 89 4d d4 e8 4c 42 f7 ff 44 8b 4d d0 4c 8b 45 c8 89 c3 44 8b 55 d4 8b 7d e8 b8 2c 00 00 00 48 8b 55 d8 48 8b 75 e0 0f 05 <48> 3d 00 f0 ff ff 77 34 89 df 48 89 45 e8 e8 99 42 f7 ff 48 8b 45
RSP: 002b:00007f7d2ccd94f0 EFLAGS: 00000297 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f7d31291ba4
RDX: 0000000000000028 RSI: 00007f7d2ccd96a0 RDI: 000000000000000a
RBP: 00007f7d2ccd9530 R08: 00007f7d2ccd9598 R09: 000000000000000c
R10: 0000000000000000 R11: 0000000000000297 R12: 0000000000000028
R13: 00007f7d2ccd9598 R14: 00007f7d2ccd96a0 R15: 00000000000000e1
</TASK>
Fixes: 4c24272 ("net/mlx5e: Listen to ARP events to update IPsec L2 headers in tunnel mode")
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 13, 2025
commit 6e64d6b upstream. In commit e4b5ccd ("drm/v3d: Ensure job pointer is set to NULL after job completion"), we introduced a change to assign the job pointer to NULL after completing a job, indicating job completion. However, this approach created a race condition between the DRM scheduler workqueue and the IRQ execution thread. As soon as the fence is signaled in the IRQ execution thread, a new job starts to be executed. This results in a race condition where the IRQ execution thread sets the job pointer to NULL simultaneously as the `run_job()` function assigns a new job to the pointer. This race condition can lead to a NULL pointer dereference if the IRQ execution thread sets the job pointer to NULL after `run_job()` assigns it to the new job. When the new job completes and the GPU emits an interrupt, `v3d_irq()` is triggered, potentially causing a crash. [ 466.310099] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000c0 [ 466.318928] Mem abort info: [ 466.321723] ESR = 0x0000000096000005 [ 466.325479] EC = 0x25: DABT (current EL), IL = 32 bits [ 466.330807] SET = 0, FnV = 0 [ 466.333864] EA = 0, S1PTW = 0 [ 466.337010] FSC = 0x05: level 1 translation fault [ 466.341900] Data abort info: [ 466.344783] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 466.350285] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 466.355350] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 466.360677] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000089772000 [ 466.367140] [00000000000000c0] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 466.375875] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 466.382163] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device algif_hash algif_skcipher af_alg bnep binfmt_misc vc4 snd_soc_hdmi_codec drm_display_helper cec brcmfmac_wcc spidev rpivid_hevc(C) drm_client_lib brcmfmac hci_uart drm_dma_helper pisp_be btbcm brcmutil snd_soc_core aes_ce_blk v4l2_mem2mem bluetooth aes_ce_cipher snd_compress videobuf2_dma_contig ghash_ce cfg80211 gf128mul snd_pcm_dmaengine videobuf2_memops ecdh_generic sha2_ce ecc videobuf2_v4l2 snd_pcm v3d sha256_arm64 rfkill videodev snd_timer sha1_ce libaes gpu_sched snd videobuf2_common sha1_generic drm_shmem_helper mc rp1_pio drm_kms_helper raspberrypi_hwmon spi_bcm2835 gpio_keys i2c_brcmstb rp1 raspberrypi_gpiomem rp1_mailbox rp1_adc nvmem_rmem uio_pdrv_genirq uio i2c_dev drm ledtrig_pattern drm_panel_orientation_quirks backlight fuse dm_mod ip_tables x_tables ipv6 [ 466.458429] CPU: 0 UID: 1000 PID: 2008 Comm: chromium Tainted: G C 6.13.0-v8+ torvalds#18 [ 466.467336] Tainted: [C]=CRAP [ 466.470306] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT) [ 466.476157] pstate: 404000c9 (nZcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 466.483143] pc : v3d_irq+0x118/0x2e0 [v3d] [ 466.487258] lr : __handle_irq_event_percpu+0x60/0x228 [ 466.492327] sp : ffffffc080003ea0 [ 466.495646] x29: ffffffc080003ea0 x28: ffffff80c0c94200 x27: 0000000000000000 [ 466.502807] x26: ffffffd08dd81d7b x25: ffffff80c0c94200 x24: ffffff8003bdc200 [ 466.509969] x23: 0000000000000001 x22: 00000000000000a7 x21: 0000000000000000 [ 466.517130] x20: ffffff8041bb0000 x19: 0000000000000001 x18: 0000000000000000 [ 466.524291] x17: ffffffafadfb0000 x16: ffffffc080000000 x15: 0000000000000000 [ 466.531452] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 466.538613] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffffd08c527eb0 [ 466.545777] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 [ 466.552941] x5 : ffffffd08c4100d0 x4 : ffffffafadfb0000 x3 : ffffffc080003f70 [ 466.560102] x2 : ffffffc0829e8058 x1 : 0000000000000001 x0 : 0000000000000000 [ 466.567263] Call trace: [ 466.569711] v3d_irq+0x118/0x2e0 [v3d] (P) [ 466.573826] __handle_irq_event_percpu+0x60/0x228 [ 466.578546] handle_irq_event+0x54/0xb8 [ 466.582391] handle_fasteoi_irq+0xac/0x240 [ 466.586498] generic_handle_domain_irq+0x34/0x58 [ 466.591128] gic_handle_irq+0x48/0xd8 [ 466.594798] call_on_irq_stack+0x24/0x58 [ 466.598730] do_interrupt_handler+0x88/0x98 [ 466.602923] el0_interrupt+0x44/0xc0 [ 466.606508] __el0_irq_handler_common+0x18/0x28 [ 466.611050] el0t_64_irq_handler+0x10/0x20 [ 466.615156] el0t_64_irq+0x198/0x1a0 [ 466.618740] Code: 52800035 3607faf3 f9442e80 52800021 (f9406018) [ 466.624853] ---[ end trace 0000000000000000 ]--- [ 466.629483] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 466.636384] SMP: stopping secondary CPUs [ 466.640320] Kernel Offset: 0x100c400000 from 0xffffffc080000000 [ 466.646259] PHYS_OFFSET: 0x0 [ 466.649141] CPU features: 0x100,00000170,00901250,0200720b [ 466.654644] Memory Limit: none [ 466.657706] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- Fix the crash by assigning the job pointer to NULL before signaling the fence. This ensures that the job pointer is cleared before any new job starts execution, preventing the race condition and the NULL pointer dereference crash. Cc: [email protected] Fixes: e4b5ccd ("drm/v3d: Ensure job pointer is set to NULL after job completion") Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Jose Maria Casanova Crespo <[email protected]> Reviewed-by: Iago Toral Quiroga <[email protected]> Tested-by: Phil Elwell <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 13, 2025
[ Upstream commit 8f70caa ] Power Hypervisor can possibily allocate MMIO window intersecting with Dynamic DMA Window (DDW) range, which is over 32-bit addressing. These MMIO pages needs to be marked as reserved so that IOMMU doesn't map DMA buffers in this range. The current code is not marking these pages correctly which is resulting in LPAR to OOPS while booting. The stack is at below BUG: Unable to handle kernel data access on read at 0xc00800005cd40000 Faulting instruction address: 0xc00000000005cdac Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: af_packet rfkill ibmveth(X) lpfc(+) nvmet_fc nvmet nvme_keyring crct10dif_vpmsum nvme_fc nvme_fabrics nvme_core be2net(+) nvme_auth rtc_generic nfsd auth_rpcgss nfs_acl lockd grace sunrpc fuse configfs ip_tables x_tables xfs libcrc32c dm_service_time ibmvfc(X) scsi_transport_fc vmx_crypto gf128mul crc32c_vpmsum dm_mirror dm_region_hash dm_log dm_multipath dm_mod sd_mod scsi_dh_emc scsi_dh_rdac scsi_dh_alua t10_pi crc64_rocksoft_generic crc64_rocksoft sg crc64 scsi_mod Supported: Yes, External CPU: 8 PID: 241 Comm: kworker/8:1 Kdump: loaded Not tainted 6.4.0-150600.23.14-default #1 SLE15-SP6 b44ee71c81261b9e4bab5e0cde1f2ed891d5359b Hardware name: IBM,9080-M9S POWER9 (raw) 0x4e2103 0xf000005 of:IBM,FW950.B0 (VH950_149) hv:phyp pSeries Workqueue: events work_for_cpu_fn NIP: c00000000005cdac LR: c00000000005e830 CTR: 0000000000000000 REGS: c00001400c9ff770 TRAP: 0300 Not tainted (6.4.0-150600.23.14-default) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24228448 XER: 00000001 CFAR: c00000000005cdd4 DAR: c00800005cd40000 DSISR: 40000000 IRQMASK: 0 GPR00: c00000000005e830 c00001400c9ffa10 c000000001987d00 c00001400c4fe800 GPR04: 0000080000000000 0000000000000001 0000000004000000 0000000000800000 GPR08: 0000000004000000 0000000000000001 c00800005cd40000 ffffffffffffffff GPR12: 0000000084228882 c00000000a4c4f00 0000000000000010 0000080000000000 GPR16: c00001400c4fe800 0000000004000000 0800000000000000 c00000006088b800 GPR20: c00001401a7be980 c00001400eff3800 c000000002a2da68 000000000000002b GPR24: c0000000026793a8 c000000002679368 000000000000002a c0000000026793c8 GPR28: 000008007effffff 0000080000000000 0000000000800000 c00001400c4fe800 NIP [c00000000005cdac] iommu_table_reserve_pages+0xac/0x100 LR [c00000000005e830] iommu_init_table+0x80/0x1e0 Call Trace: [c00001400c9ffa10] [c00000000005e810] iommu_init_table+0x60/0x1e0 (unreliable) [c00001400c9ffa90] [c00000000010356c] iommu_bypass_supported_pSeriesLP+0x9cc/0xe40 [c00001400c9ffc30] [c00000000005c300] dma_iommu_dma_supported+0xf0/0x230 [c00001400c9ffcb0] [c00000000024b0c4] dma_supported+0x44/0x90 [c00001400c9ffcd0] [c00000000024b14c] dma_set_mask+0x3c/0x80 [c00001400c9ffd00] [c0080000555b715c] be_probe+0xc4/0xb90 [be2net] [c00001400c9ffdc0] [c000000000986f3c] local_pci_probe+0x6c/0x110 [c00001400c9ffe40] [c000000000188f28] work_for_cpu_fn+0x38/0x60 [c00001400c9ffe70] [c00000000018e454] process_one_work+0x314/0x620 [c00001400c9fff10] [c00000000018f280] worker_thread+0x2b0/0x620 [c00001400c9fff90] [c00000000019bb18] kthread+0x148/0x150 [c00001400c9fffe0] [c00000000000ded8] start_kernel_thread+0x14/0x18 There are 2 issues in the code 1. The index is "int" while the address is "unsigned long". This results in negative value when setting the bitmap. 2. The DMA offset is page shifted but the MMIO range is used as-is (64-bit address). MMIO address needs to be page shifted as well. Fixes: 3c33066 ("powerpc/kernel/iommu: Add new iommu_table_in_use() helper") Signed-off-by: Gaurav Batra <[email protected]> Reviewed-by: Nilay Shroff <[email protected]> Signed-off-by: Madhavan Srinivasan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 13, 2025
[ Upstream commit c0def46 ] [WARNING] There are several warnings about the recently introduced qgroup auto-removal that it triggers WARN_ON() for the non-zero rfer/excl numbers, e.g: ------------[ cut here ]------------ WARNING: CPU: 67 PID: 2882 at fs/btrfs/qgroup.c:1854 btrfs_remove_qgroup+0x3df/0x450 CPU: 67 UID: 0 PID: 2882 Comm: btrfs-cleaner Kdump: loaded Not tainted 6.11.6-300.fc41.x86_64 #1 RIP: 0010:btrfs_remove_qgroup+0x3df/0x450 Call Trace: <TASK> btrfs_qgroup_cleanup_dropped_subvolume+0x97/0xc0 btrfs_drop_snapshot+0x44e/0xa80 btrfs_clean_one_deleted_snapshot+0xc3/0x110 cleaner_kthread+0xd8/0x130 kthread+0xd2/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace 0000000000000000 ]--- BTRFS warning (device sda): to be deleted qgroup 0/319 has non-zero numbers, rfer 258478080 rfer_cmpr 258478080 excl 0 excl_cmpr 0 [CAUSE] Although the root cause is still unclear, as if qgroup is consistent a fully dropped subvolume (with extra transaction committed) should lead to all zero numbers for the qgroup. My current guess is the subvolume drop triggered the new subtree drop threshold thus marked qgroup inconsistent, then rescan cleared it but some corner case is not properly handled during subvolume dropping. But at least for this particular case, since it's only the rfer/excl not properly reset to 0, and qgroup is already marked inconsistent, there is nothing to be worried for the end users. The user space tool utilizing qgroup would queue a rescan to handle everything, so the kernel wanring is a little overkilled. [ENHANCEMENT] Enhance the warning inside btrfs_remove_qgroup() by: - Only do WARN() if CONFIG_BTRFS_DEBUG is enabled As explained the kernel can handle inconsistent qgroups by simply do a rescan, there is nothing to bother the end users. - Treat the reserved space leak the same as non-zero numbers By outputting the values and trigger a WARN() if it's a debug build. So far I haven't experienced any case related to reserved space so I hope we will never need to bother them. Fixes: 839d6ea ("btrfs: automatically remove the subvolume qgroup") Link: kdave/btrfs-progs#922 Signed-off-by: Qu Wenruo <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 13, 2025
[ Upstream commit 1068568 ] The current implementation does not work correctly with a limit of 1. iproute2 actually checks for this and this patch adds the check in kernel as well. This fixes the following syzkaller reported crash: UBSAN: array-index-out-of-bounds in net/sched/sch_sfq.c:210:6 index 65535 is out of range for type 'struct sfq_head[128]' CPU: 0 PID: 2569 Comm: syz-executor101 Not tainted 5.10.0-smp-DEV #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x125/0x19f lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:148 [inline] __ubsan_handle_out_of_bounds+0xed/0x120 lib/ubsan.c:347 sfq_link net/sched/sch_sfq.c:210 [inline] sfq_dec+0x528/0x600 net/sched/sch_sfq.c:238 sfq_dequeue+0x39b/0x9d0 net/sched/sch_sfq.c:500 sfq_reset+0x13/0x50 net/sched/sch_sfq.c:525 qdisc_reset+0xfe/0x510 net/sched/sch_generic.c:1026 tbf_reset+0x3d/0x100 net/sched/sch_tbf.c:319 qdisc_reset+0xfe/0x510 net/sched/sch_generic.c:1026 dev_reset_queue+0x8c/0x140 net/sched/sch_generic.c:1296 netdev_for_each_tx_queue include/linux/netdevice.h:2350 [inline] dev_deactivate_many+0x6dc/0xc20 net/sched/sch_generic.c:1362 __dev_close_many+0x214/0x350 net/core/dev.c:1468 dev_close_many+0x207/0x510 net/core/dev.c:1506 unregister_netdevice_many+0x40f/0x16b0 net/core/dev.c:10738 unregister_netdevice_queue+0x2be/0x310 net/core/dev.c:10695 unregister_netdevice include/linux/netdevice.h:2893 [inline] __tun_detach+0x6b6/0x1600 drivers/net/tun.c:689 tun_detach drivers/net/tun.c:705 [inline] tun_chr_close+0x104/0x1b0 drivers/net/tun.c:3640 __fput+0x203/0x840 fs/file_table.c:280 task_work_run+0x129/0x1b0 kernel/task_work.c:185 exit_task_work include/linux/task_work.h:33 [inline] do_exit+0x5ce/0x2200 kernel/exit.c:931 do_group_exit+0x144/0x310 kernel/exit.c:1046 __do_sys_exit_group kernel/exit.c:1057 [inline] __se_sys_exit_group kernel/exit.c:1055 [inline] __x64_sys_exit_group+0x3b/0x40 kernel/exit.c:1055 do_syscall_64+0x6c/0xd0 entry_SYSCALL_64_after_hwframe+0x61/0xcb RIP: 0033:0x7fe5e7b52479 Code: Unable to access opcode bytes at RIP 0x7fe5e7b5244f. RSP: 002b:00007ffd3c800398 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe5e7b52479 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000 RBP: 00007fe5e7bcd2d0 R08: ffffffffffffffb8 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe5e7bcd2d0 R13: 0000000000000000 R14: 00007fe5e7bcdd20 R15: 00007fe5e7b24270 The crash can be also be reproduced with the following (with a tc recompiled to allow for sfq limits of 1): tc qdisc add dev dummy0 handle 1: root tbf rate 1Kbit burst 100b lat 1s ../iproute2-6.9.0/tc/tc qdisc add dev dummy0 handle 2: parent 1:10 sfq limit 1 ifconfig dummy0 up ping -I dummy0 -f -c2 -W0.1 8.8.8.8 sleep 1 Scenario that triggers the crash: * the first packet is sent and queued in TBF and SFQ; qdisc qlen is 1 * TBF dequeues: it peeks from SFQ which moves the packet to the gso_skb list and keeps qdisc qlen set to 1. TBF is out of tokens so it schedules itself for later. * the second packet is sent and TBF tries to queues it to SFQ. qdisc qlen is now 2 and because the SFQ limit is 1 the packet is dropped by SFQ. At this point qlen is 1, and all of the SFQ slots are empty, however q->tail is not NULL. At this point, assuming no more packets are queued, when sch_dequeue runs again it will decrement the qlen for the current empty slot causing an underflow and the subsequent out of bounds access. Reported-by: syzbot <[email protected]> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Octavian Purdila <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 13, 2025
[ Upstream commit 95fc45d ] syzbot found a lockdep issue [1]. We should remove ax25 RTNL dependency in ax25_setsockopt() This should also fix a variety of possible UAF in ax25. [1] WARNING: possible circular locking dependency detected 6.13.0-rc3-syzkaller-00762-g9268abe611b0 #0 Not tainted ------------------------------------------------------ syz.5.1818/12806 is trying to acquire lock: ffffffff8fcb3988 (rtnl_mutex){+.+.}-{4:4}, at: ax25_setsockopt+0xa55/0xe90 net/ax25/af_ax25.c:680 but task is already holding lock: ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1618 [inline] ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: ax25_setsockopt+0x209/0xe90 net/ax25/af_ax25.c:574 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (sk_lock-AF_AX25){+.+.}-{0:0}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 lock_sock_nested+0x48/0x100 net/core/sock.c:3642 lock_sock include/net/sock.h:1618 [inline] ax25_kill_by_device net/ax25/af_ax25.c:101 [inline] ax25_device_event+0x24d/0x580 net/ax25/af_ax25.c:146 notifier_call_chain+0x1a5/0x3f0 kernel/notifier.c:85 __dev_notify_flags+0x207/0x400 dev_change_flags+0xf0/0x1a0 net/core/dev.c:9026 dev_ifsioc+0x7c8/0xe70 net/core/dev_ioctl.c:563 dev_ioctl+0x719/0x1340 net/core/dev_ioctl.c:820 sock_do_ioctl+0x240/0x460 net/socket.c:1234 sock_ioctl+0x626/0x8e0 net/socket.c:1339 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (rtnl_mutex){+.+.}-{4:4}: check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/locking/lockdep.c:3280 [inline] validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904 __lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x1ac/0xee0 kernel/locking/mutex.c:735 ax25_setsockopt+0xa55/0xe90 net/ax25/af_ax25.c:680 do_sock_setsockopt+0x3af/0x720 net/socket.c:2324 __sys_setsockopt net/socket.c:2349 [inline] __do_sys_setsockopt net/socket.c:2355 [inline] __se_sys_setsockopt net/socket.c:2352 [inline] __x64_sys_setsockopt+0x1ee/0x280 net/socket.c:2352 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sk_lock-AF_AX25); lock(rtnl_mutex); lock(sk_lock-AF_AX25); lock(rtnl_mutex); *** DEADLOCK *** 1 lock held by syz.5.1818/12806: #0: ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1618 [inline] #0: ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: ax25_setsockopt+0x209/0xe90 net/ax25/af_ax25.c:574 stack backtrace: CPU: 1 UID: 0 PID: 12806 Comm: syz.5.1818 Not tainted 6.13.0-rc3-syzkaller-00762-g9268abe611b0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_circular_bug+0x13a/0x1b0 kernel/locking/lockdep.c:2074 check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2206 check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/locking/lockdep.c:3280 [inline] validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904 __lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x1ac/0xee0 kernel/locking/mutex.c:735 ax25_setsockopt+0xa55/0xe90 net/ax25/af_ax25.c:680 do_sock_setsockopt+0x3af/0x720 net/socket.c:2324 __sys_setsockopt net/socket.c:2349 [inline] __do_sys_setsockopt net/socket.c:2355 [inline] __se_sys_setsockopt net/socket.c:2352 [inline] __x64_sys_setsockopt+0x1ee/0x280 net/socket.c:2352 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f7b62385d29 Fixes: c433570 ("ax25: fix a use-after-free in ax25_fillin_cb()") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Kuniyuki Iwashima <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 13, 2025
[ Upstream commit 1be9449 ] There is a specific error path in probe functions in wilc drivers (both sdio and spi) which can lead to kernel panic, as this one for example when using SPI: Unable to handle kernel paging request at virtual address 9f000000 when read [9f000000] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: wilc1000_spi(+) crc_itu_t crc7 wilc1000 cfg80211 bluetooth ecdh_generic ecc CPU: 0 UID: 0 PID: 106 Comm: modprobe Not tainted 6.13.0-rc3+ torvalds#22 Hardware name: Atmel SAMA5 PC is at wiphy_unregister+0x244/0xc40 [cfg80211] LR is at wiphy_unregister+0x1c0/0xc40 [cfg80211] [...] wiphy_unregister [cfg80211] from wilc_netdev_cleanup+0x380/0x494 [wilc1000] wilc_netdev_cleanup [wilc1000] from wilc_bus_probe+0x360/0x834 [wilc1000_spi] wilc_bus_probe [wilc1000_spi] from spi_probe+0x15c/0x1d4 spi_probe from really_probe+0x270/0xb2c really_probe from __driver_probe_device+0x1dc/0x4e8 __driver_probe_device from driver_probe_device+0x5c/0x140 driver_probe_device from __driver_attach+0x220/0x540 __driver_attach from bus_for_each_dev+0x13c/0x1a8 bus_for_each_dev from bus_add_driver+0x2a0/0x6a4 bus_add_driver from driver_register+0x27c/0x51c driver_register from do_one_initcall+0xf8/0x564 do_one_initcall from do_init_module+0x2e4/0x82c do_init_module from load_module+0x59a0/0x70c4 load_module from init_module_from_file+0x100/0x148 init_module_from_file from sys_finit_module+0x2fc/0x924 sys_finit_module from ret_fast_syscall+0x0/0x1c The issue can easily be reproduced, for example by not wiring correctly a wilc device through SPI (and so, make it unresponsive to early SPI commands). It is due to a recent change decoupling wiphy allocation from wiphy registration, however wilc_netdev_cleanup has not been updated accordingly, letting it possibly call wiphy unregister on a wiphy which has never been registered. Fix this crash by moving wiphy_unregister/wiphy_free out of wilc_netdev_cleanup, and by adjusting error paths in both drivers Fixes: fbdf0c5 ("wifi: wilc1000: Register wiphy after reading out chipid") Signed-off-by: Alexis Lothoré <[email protected]> Reviewed-by: Marek Vasut <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 13, 2025
[ Upstream commit 2f76676 ] If WoWLAN failed in resume flow, the rtw89_ops_add_interface() triggered without removing the interface first. Then the mgnt_entry list init again, causing the list_empty() check in rtw89_chanctx_ops_assign_vif() useless, and list_add_tail() again. Therefore, we have added a check to prevent double adding of the list. rtw89_8852ce 0000:01:00.0: failed to check wow status disabled rtw89_8852ce 0000:01:00.0: wow: failed to check disable fw ready rtw89_8852ce 0000:01:00.0: wow: failed to swap to normal fw rtw89_8852ce 0000:01:00.0: failed to disable wow rtw89_8852ce 0000:01:00.0: failed to resume for wow -110 rtw89_8852ce 0000:01:00.0: MAC has already powered on i2c_hid_acpi i2c-ILTK0001:00: PM: acpi_subsys_resume+0x0/0x60 returned 0 after 284705 usecs list_add corruption. prev->next should be next (ffff9d9719d82228), but was ffff9d9719f96030. (prev=ffff9d9719f96030). ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:34! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 6918 Comm: kworker/u8:19 Tainted: G U O Hardware name: Google Anraggar/Anraggar, BIOS Google_Anraggar.15217.514.0 03/25/2024 Workqueue: events_unbound async_run_entry_fn RIP: 0010:__list_add_valid_or_report+0x9f/0xb0 Code: e8 56 89 ff ff 0f 0b 48 c7 c7 3e fc e0 96 48 89 c6 e8 45 89 ff ... RSP: 0018:ffffa51b42bbbaf0 EFLAGS: 00010246 RAX: 0000000000000075 RBX: ffff9d9719d82ab0 RCX: 13acb86e047a4400 RDX: 3fffffffffffffff RSI: 0000000000000000 RDI: 00000000ffffdfff RBP: ffffa51b42bbbb28 R08: ffffffff9768e250 R09: 0000000000001fff R10: ffffffff9765e250 R11: 0000000000005ffd R12: ffff9d9719f95c40 R13: ffff9d9719f95be8 R14: ffff9d97081bfd78 R15: ffff9d9719d82060 FS: 0000000000000000(0000) GS:ffff9d9a6fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007e7d029a4060 CR3: 0000000345e38000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x68/0xb0 ? die+0xaa/0xd0 ? do_trap+0x9f/0x170 ? __list_add_valid_or_report+0x9f/0xb0 ? __list_add_valid_or_report+0x9f/0xb0 ? handle_invalid_op+0x69/0x90 ? __list_add_valid_or_report+0x9f/0xb0 ? exc_invalid_op+0x3c/0x50 ? asm_exc_invalid_op+0x16/0x20 ? __list_add_valid_or_report+0x9f/0xb0 rtw89_chanctx_ops_assign_vif+0x1f9/0x210 [rtw89_core cbb375c44bf28564ce479002bff66617a25d9ac1] ? __mutex_unlock_slowpath+0xa0/0xf0 rtw89_ops_assign_vif_chanctx+0x4b/0x90 [rtw89_core cbb375c44bf28564ce479002bff66617a25d9ac1] drv_assign_vif_chanctx+0xa7/0x1f0 [mac80211 6efaad16237edaaea0868b132d4f93ecf918a8b6] ieee80211_reconfig+0x9cb/0x17b0 [mac80211 6efaad16237edaaea0868b132d4f93ecf918a8b6] ? __pfx_wiphy_resume+0x10/0x10 [cfg80211 572d03acaaa933fe38251be7fce3b3675284b8ed] ? dev_printk_emit+0x51/0x70 ? _dev_info+0x6e/0x90 wiphy_resume+0x89/0x180 [cfg80211 572d03acaaa933fe38251be7fce3b3675284b8ed] ? __pfx_wiphy_resume+0x10/0x10 [cfg80211 572d03acaaa933fe38251be7fce3b3675284b8ed] dpm_run_callback+0x37/0x1e0 device_resume+0x26d/0x4b0 ? __pfx_dpm_watchdog_handler+0x10/0x10 async_resume+0x1d/0x30 async_run_entry_fn+0x29/0xd0 worker_thread+0x397/0x970 kthread+0xed/0x110 ? __pfx_worker_thread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x38/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> Fixes: 68ec751 ("wifi: rtw89: chan: manage active interfaces") Signed-off-by: Chih-Kang Chang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 13, 2025
[ Upstream commit be7a6a7 ] It isn't guaranteed that NETWORK_INTERFACE_INFO::LinkSpeed will always be set by the server, so the client must handle any values and then prevent oopses like below from happening: Oops: divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 UID: 0 PID: 1323 Comm: cat Not tainted 6.13.0-rc7 #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-3.fc41 04/01/2014 RIP: 0010:cifs_debug_data_proc_show+0xa45/0x1460 [cifs] Code: 00 00 48 89 df e8 3b cd 1b c1 41 f6 44 24 2c 04 0f 84 50 01 00 00 48 89 ef e8 e7 d0 1b c1 49 8b 44 24 18 31 d2 49 8d 7c 24 28 <48> f7 74 24 18 48 89 c3 e8 6e cf 1b c1 41 8b 6c 24 28 49 8d 7c 24 RSP: 0018:ffffc90001817be0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88811230022c RCX: ffffffffc041bd99 RDX: 0000000000000000 RSI: 0000000000000567 RDI: ffff888112300228 RBP: ffff888112300218 R08: fffff52000302f5f R09: ffffed1022fa58ac R10: ffff888117d2c566 R11: 00000000fffffffe R12: ffff888112300200 R13: 000000012a15343f R14: 0000000000000001 R15: ffff888113f2db58 FS: 00007fe27119e740(0000) GS:ffff888148600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe2633c5000 CR3: 0000000124da0000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? die+0x2e/0x50 ? do_trap+0x159/0x1b0 ? cifs_debug_data_proc_show+0xa45/0x1460 [cifs] ? do_error_trap+0x90/0x130 ? cifs_debug_data_proc_show+0xa45/0x1460 [cifs] ? exc_divide_error+0x39/0x50 ? cifs_debug_data_proc_show+0xa45/0x1460 [cifs] ? asm_exc_divide_error+0x1a/0x20 ? cifs_debug_data_proc_show+0xa39/0x1460 [cifs] ? cifs_debug_data_proc_show+0xa45/0x1460 [cifs] ? seq_read_iter+0x42e/0x790 seq_read_iter+0x19a/0x790 proc_reg_read_iter+0xbe/0x110 ? __pfx_proc_reg_read_iter+0x10/0x10 vfs_read+0x469/0x570 ? do_user_addr_fault+0x398/0x760 ? __pfx_vfs_read+0x10/0x10 ? find_held_lock+0x8a/0xa0 ? __pfx_lock_release+0x10/0x10 ksys_read+0xd3/0x170 ? __pfx_ksys_read+0x10/0x10 ? __rcu_read_unlock+0x50/0x270 ? mark_held_locks+0x1a/0x90 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe271288911 Code: 00 48 8b 15 01 25 10 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 20 ad 01 00 f3 0f 1e fa 80 3d b5 a7 10 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec RSP: 002b:00007ffe87c079d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000040000 RCX: 00007fe271288911 RDX: 0000000000040000 RSI: 00007fe2633c6000 RDI: 0000000000000003 RBP: 00007ffe87c07a00 R08: 0000000000000000 R09: 00007fe2713e6380 R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000040000 R13: 00007fe2633c6000 R14: 0000000000000003 R15: 0000000000000000 </TASK> Fix this by setting cifs_server_iface::speed to a sane value (1Gbps) by default when link speed is unset. Cc: Shyam Prasad N <[email protected]> Cc: Tom Talpey <[email protected]> Fixes: a6d8fb5 ("cifs: distribute channels across interfaces based on speed") Reported-by: Frank Sorenson <[email protected]> Reported-by: Jay Shin <[email protected]> Signed-off-by: Paulo Alcantara (Red Hat) <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 13, 2025
[ Upstream commit 58f038e ] During the update procedure, when overwrite element in a pre-allocated htab, the freeing of old_element is protected by the bucket lock. The reason why the bucket lock is necessary is that the old_element has already been stashed in htab->extra_elems after alloc_htab_elem() returns. If freeing the old_element after the bucket lock is unlocked, the stashed element may be reused by concurrent update procedure and the freeing of old_element will run concurrently with the reuse of the old_element. However, the invocation of check_and_free_fields() may acquire a spin-lock which violates the lockdep rule because its caller has already held a raw-spin-lock (bucket lock). The following warning will be reported when such race happens: BUG: scheduling while atomic: test_progs/676/0x00000003 3 locks held by test_progs/676: #0: ffffffff864b0240 (rcu_read_lock_trace){....}-{0:0}, at: bpf_prog_test_run_syscall+0x2c0/0x830 #1: ffff88810e961188 (&htab->lockdep_key){....}-{2:2}, at: htab_map_update_elem+0x306/0x1500 #2: ffff8881f4eac1b8 (&base->softirq_expiry_lock){....}-{2:2}, at: hrtimer_cancel_wait_running+0xe9/0x1b0 Modules linked in: bpf_testmod(O) Preemption disabled at: [<ffffffff817837a3>] htab_map_update_elem+0x293/0x1500 CPU: 0 UID: 0 PID: 676 Comm: test_progs Tainted: G ... 6.12.0+ torvalds#11 Tainted: [W]=WARN, [O]=OOT_MODULE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)... Call Trace: <TASK> dump_stack_lvl+0x57/0x70 dump_stack+0x10/0x20 __schedule_bug+0x120/0x170 __schedule+0x300c/0x4800 schedule_rtlock+0x37/0x60 rtlock_slowlock_locked+0x6d9/0x54c0 rt_spin_lock+0x168/0x230 hrtimer_cancel_wait_running+0xe9/0x1b0 hrtimer_cancel+0x24/0x30 bpf_timer_delete_work+0x1d/0x40 bpf_timer_cancel_and_free+0x5e/0x80 bpf_obj_free_fields+0x262/0x4a0 check_and_free_fields+0x1d0/0x280 htab_map_update_elem+0x7fc/0x1500 bpf_prog_9f90bc20768e0cb9_overwrite_cb+0x3f/0x43 bpf_prog_ea601c4649694dbd_overwrite_timer+0x5d/0x7e bpf_prog_test_run_syscall+0x322/0x830 __sys_bpf+0x135d/0x3ca0 __x64_sys_bpf+0x75/0xb0 x64_sys_call+0x1b5/0xa10 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ... </TASK> It seems feasible to break the reuse and refill of per-cpu extra_elems into two independent parts: reuse the per-cpu extra_elems with bucket lock being held and refill the old_element as per-cpu extra_elems after the bucket lock is unlocked. However, it will make the concurrent overwrite procedures on the same CPU return unexpected -E2BIG error when the map is full. Therefore, the patch fixes the lock problem by breaking the cancelling of bpf_timer into two steps for PREEMPT_RT: 1) use hrtimer_try_to_cancel() and check its return value 2) if the timer is running, use hrtimer_cancel() through a kworker to cancel it again Considering that the current implementation of hrtimer_cancel() will try to acquire a being held softirq_expiry_lock when the current timer is running, these steps above are reasonable. However, it also has downside. When the timer is running, the cancelling of the timer is delayed when releasing the last map uref. The delay is also fixable (e.g., break the cancelling of bpf timer into two parts: one part in locked scope, another one in unlocked scope), it can be revised later if necessary. It is a bit hard to decide the right fix tag. One reason is that the problem depends on PREEMPT_RT which is enabled in v6.12. Considering the softirq_expiry_lock lock exists since v5.4 and bpf_timer is introduced in v5.15, the bpf_timer commit is used in the fixes tag and an extra depends-on tag is added to state the dependency on PREEMPT_RT. Fixes: b00628b ("bpf: Introduce bpf timers.") Depends-on: v6.12+ with PREEMPT_RT enabled Reported-by: Sebastian Andrzej Siewior <[email protected]> Closes: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Hou Tao <[email protected]> Reviewed-by: Toke Høiland-Jørgensen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 13, 2025
[ Upstream commit 600258d ] Packets handled by hardware have added secpath as a way to inform XFRM core code that this path was already handled. That secpath is not needed at all after policy is checked and it is removed later in the stack. However, in the case of IP forwarding is enabled (/proc/sys/net/ipv4/ip_forward), that secpath is not removed and packets which already were handled are reentered to the driver TX path with xfrm_offload set. The following kernel panic is observed in mlx5 in such case: mlx5_core 0000:04:00.0 enp4s0f0np0: Link up mlx5_core 0000:04:00.1 enp4s0f1np1: Link up Initializing XFRM netlink socket IPsec XFRM device driver BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page PGD 0 P4D 0 Oops: Oops: 0010 [#1] PREEMPT SMP CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc1-alex #3 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffb87380003800 EFLAGS: 00010206 RAX: ffff8df004e02600 RBX: ffffb873800038d8 RCX: 00000000ffff98cf RDX: ffff8df00733e108 RSI: ffff8df00521fb80 RDI: ffff8df001661f00 RBP: ffffb87380003850 R08: ffff8df013980000 R09: 0000000000000010 R10: 0000000000000002 R11: 0000000000000002 R12: ffff8df001661f00 R13: ffff8df00521fb80 R14: ffff8df00733e108 R15: ffff8df011faf04e FS: 0000000000000000(0000) GS:ffff8df46b800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000106384000 CR4: 0000000000350ef0 Call Trace: <IRQ> ? show_regs+0x63/0x70 ? __die_body+0x20/0x60 ? __die+0x2b/0x40 ? page_fault_oops+0x15c/0x550 ? do_user_addr_fault+0x3ed/0x870 ? exc_page_fault+0x7f/0x190 ? asm_exc_page_fault+0x27/0x30 mlx5e_ipsec_handle_tx_skb+0xe7/0x2f0 [mlx5_core] mlx5e_xmit+0x58e/0x1980 [mlx5_core] ? __fib_lookup+0x6a/0xb0 dev_hard_start_xmit+0x82/0x1d0 sch_direct_xmit+0xfe/0x390 __dev_queue_xmit+0x6d8/0xee0 ? __fib_lookup+0x6a/0xb0 ? internal_add_timer+0x48/0x70 ? mod_timer+0xe2/0x2b0 neigh_resolve_output+0x115/0x1b0 __neigh_update+0x26a/0xc50 neigh_update+0x14/0x20 arp_process+0x2cb/0x8e0 ? __napi_build_skb+0x5e/0x70 arp_rcv+0x11e/0x1c0 ? dev_gro_receive+0x574/0x820 __netif_receive_skb_list_core+0x1cf/0x1f0 netif_receive_skb_list_internal+0x183/0x2a0 napi_complete_done+0x76/0x1c0 mlx5e_napi_poll+0x234/0x7a0 [mlx5_core] __napi_poll+0x2d/0x1f0 net_rx_action+0x1a6/0x370 ? atomic_notifier_call_chain+0x3b/0x50 ? irq_int_handler+0x15/0x20 [mlx5_core] handle_softirqs+0xb9/0x2f0 ? handle_irq_event+0x44/0x60 irq_exit_rcu+0xdb/0x100 common_interrupt+0x98/0xc0 </IRQ> <TASK> asm_common_interrupt+0x27/0x40 RIP: 0010:pv_native_safe_halt+0xb/0x10 Code: 09 c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 22 0f 1f 84 00 00 00 00 00 90 eb 07 0f 00 2d 7f e9 36 00 fb 40 00 83 ff 07 77 21 89 ff ff 24 fd 88 3d a1 bd 0f 21 f8 RSP: 0018:ffffffffbe603de8 EFLAGS: 00000202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000f92f46680 RDX: 0000000000000037 RSI: 00000000ffffffff RDI: 00000000000518d4 RBP: ffffffffbe603df0 R08: 000000cd42e4dffb R09: ffffffffbe603d70 R10: 0000004d80d62680 R11: 0000000000000001 R12: ffffffffbe60bf40 R13: 0000000000000000 R14: 0000000000000000 R15: ffffffffbe60aff8 ? default_idle+0x9/0x20 arch_cpu_idle+0x9/0x10 default_idle_call+0x29/0xf0 do_idle+0x1f2/0x240 cpu_startup_entry+0x2c/0x30 rest_init+0xe7/0x100 start_kernel+0x76b/0xb90 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0xc0/0x110 ? setup_ghcb+0xe/0x130 common_startup_64+0x13e/0x141 </TASK> Modules linked in: esp4_offload esp4 xfrm_interface xfrm6_tunnel tunnel4 tunnel6 xfrm_user xfrm_algo binfmt_misc intel_rapl_msr intel_rapl_common kvm_amd ccp kvm input_leds serio_raw qemu_fw_cfg sch_fq_codel dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua efi_pstore ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq raid6_pq async_xor xor async_tx libcrc32c raid1 raid0 mlx5_core crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha256_ssse3 sha1_ssse3 ahci mlxfw i2c_i801 libahci i2c_mux i2c_smbus psample virtio_rng pci_hyperv_intf aesni_intel crypto_simd cryptd CR2: 0000000000000000 ---[ end trace 0000000000000000 ]--- RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffb87380003800 EFLAGS: 00010206 RAX: ffff8df004e02600 RBX: ffffb873800038d8 RCX: 00000000ffff98cf RDX: ffff8df00733e108 RSI: ffff8df00521fb80 RDI: ffff8df001661f00 RBP: ffffb87380003850 R08: ffff8df013980000 R09: 0000000000000010 R10: 0000000000000002 R11: 0000000000000002 R12: ffff8df001661f00 R13: ffff8df00521fb80 R14: ffff8df00733e108 R15: ffff8df011faf04e FS: 0000000000000000(0000) GS:ffff8df46b800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000106384000 CR4: 0000000000350ef0 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x3b800000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: 5958372 ("xfrm: add RX datapath protection for IPsec packet offload mode") Signed-off-by: Alexandre Cassen <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Steffen Klassert <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 13, 2025
[ Upstream commit 396f016 ] Add read memory barrier to ensure the order of operations when accessing control queue descriptors. Specifically, we want to avoid cases where loads can be reordered: 1. Load #1 is dispatched to read descriptor flags. 2. Load #2 is dispatched to read some other field from the descriptor. 3. Load #2 completes, accessing memory/cache at a point in time when the DD flag is zero. 4. NIC DMA overwrites the descriptor, now the DD flag is one. 5. Any fields loaded before step 4 are now inconsistent with the actual descriptor state. Add read memory barrier between steps 1 and 2, so that load #2 is not executed until load #1 has completed. Fixes: 8077c72 ("idpf: add controlq init and reset checks") Reviewed-by: Przemek Kitszel <[email protected]> Reviewed-by: Sridhar Samudrala <[email protected]> Suggested-by: Lance Richardson <[email protected]> Signed-off-by: Emil Tantilov <[email protected]> Tested-by: Krishneil Singh <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 13, 2025
[ Upstream commit c7b87ce ] libtraceevent parses and returns an array of argument fields, sometimes larger than RAW_SYSCALL_ARGS_NUM (6) because it includes "__syscall_nr", idx will traverse to index 6 (7th element) whereas sc->fmt->arg holds 6 elements max, creating an out-of-bounds access. This runtime error is found by UBsan. The error message: $ sudo UBSAN_OPTIONS=print_stacktrace=1 ./perf trace -a --max-events=1 builtin-trace.c:1966:35: runtime error: index 6 out of bounds for type 'syscall_arg_fmt [6]' #0 0x5c04956be5fe in syscall__alloc_arg_fmts /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:1966 #1 0x5c04956c0510 in trace__read_syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2110 #2 0x5c04956c372b in trace__syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2436 #3 0x5c04956d2f39 in trace__init_syscalls_bpf_prog_array_maps /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:3897 #4 0x5c04956d6d25 in trace__run /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:4335 #5 0x5c04956e112e in cmd_trace /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:5502 torvalds#6 0x5c04956eda7d in run_builtin /home/howard/hw/linux-perf/tools/perf/perf.c:351 torvalds#7 0x5c04956ee0a8 in handle_internal_command /home/howard/hw/linux-perf/tools/perf/perf.c:404 torvalds#8 0x5c04956ee37f in run_argv /home/howard/hw/linux-perf/tools/perf/perf.c:448 torvalds#9 0x5c04956ee8e9 in main /home/howard/hw/linux-perf/tools/perf/perf.c:556 torvalds#10 0x79eb3622a3b7 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 torvalds#11 0x79eb3622a47a in __libc_start_main_impl ../csu/libc-start.c:360 torvalds#12 0x5c04955422d4 in _start (/home/howard/hw/linux-perf/tools/perf/perf+0x4e02d4) (BuildId: 5b6cab2d59e96a4341741765ad6914a4d784dbc6) 0.000 ( 0.014 ms): Chrome_ChildIO/117244 write(fd: 238, buf: !, count: 1) = 1 Fixes: 5e58fcf ("perf trace: Allow allocating sc->arg_fmt even without the syscall tracepoint") Signed-off-by: Howard Chu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 13, 2025
[ Upstream commit b32c369 ] In "one-shot" mode, turbostat 1. takes a counter snapshot 2. forks and waits for a child 3. takes the end counter snapshot and prints the result. But turbostat counter snapshots currently use affinity to travel around the system so that counter reads are "local", and this affinity must be cleared between #1 and #2 above. The offending commit removed that reset that allowed the child to run on cpu_present_set. Fix that issue, and improve upon the original by using cpu_possible_set for the child. This allows the child to also run on CPUs that hotplug online during its runtime. Reported-by: Zhang Rui <[email protected]> Fixes: 7bb3fe2 ("tools/power/turbostat: Obey allowed CPUs during startup") Signed-off-by: Len Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 13, 2025
commit d3d9304 upstream. Prevent double queueing of implicit ODP mr destroy work by using __xa_cmpxchg() to make sure this is the only time we are destroying this specific mr. Without this change, we could try to invalidate this mr twice, which in turn could result in queuing a MR work destroy twice, and eventually the second work could execute after the MR was freed due to the first work, causing a user after free and trace below. refcount_t: underflow; use-after-free. WARNING: CPU: 2 PID: 12178 at lib/refcount.c:28 refcount_warn_saturate+0x12b/0x130 Modules linked in: bonding ib_ipoib vfio_pci ip_gre geneve nf_tables ip6_gre gre ip6_tunnel tunnel6 ipip tunnel4 ib_umad rdma_ucm mlx5_vfio_pci vfio_pci_core vfio_iommu_type1 mlx5_ib vfio ib_uverbs mlx5_core iptable_raw openvswitch nsh rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: ib_uverbs] CPU: 2 PID: 12178 Comm: kworker/u20:5 Not tainted 6.5.0-rc1_net_next_mlx5_58c644e #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: events_unbound free_implicit_child_mr_work [mlx5_ib] RIP: 0010:refcount_warn_saturate+0x12b/0x130 Code: 48 c7 c7 38 95 2a 82 c6 05 bc c6 fe 00 01 e8 0c 66 aa ff 0f 0b 5b c3 48 c7 c7 e0 94 2a 82 c6 05 a7 c6 fe 00 01 e8 f5 65 aa ff <0f> 0b 5b c3 90 8b 07 3d 00 00 00 c0 74 12 83 f8 01 74 13 8d 50 ff RSP: 0018:ffff8881008e3e40 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000027 RDX: ffff88852c91b5c8 RSI: 0000000000000001 RDI: ffff88852c91b5c0 RBP: ffff8881dacd4e00 R08: 00000000ffffffff R09: 0000000000000019 R10: 000000000000072e R11: 0000000063666572 R12: ffff88812bfd9e00 R13: ffff8881c792d200 R14: ffff88810011c005 R15: ffff8881002099c0 FS: 0000000000000000(0000) GS:ffff88852c900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5694b5e000 CR3: 00000001153f6003 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? refcount_warn_saturate+0x12b/0x130 free_implicit_child_mr_work+0x180/0x1b0 [mlx5_ib] process_one_work+0x1cc/0x3c0 worker_thread+0x218/0x3c0 kthread+0xc6/0xf0 ret_from_fork+0x1f/0x30 </TASK> Fixes: 5256edc ("RDMA/mlx5: Rework implicit ODP destroy") Cc: [email protected] Link: https://patch.msgid.link/r/c96b8645a81085abff739e6b06e286a350d1283d.1737274283.git.leon@kernel.org Signed-off-by: Patrisious Haddad <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 13, 2025
commit c79a39d upstream. On a board running ntpd and gpsd, I'm seeing a consistent use-after-free in sys_exit() from gpsd when rebooting: pps pps1: removed ------------[ cut here ]------------ kobject: '(null)' (00000000db4bec24): is not initialized, yet kobject_put() is being called. WARNING: CPU: 2 PID: 440 at lib/kobject.c:734 kobject_put+0x120/0x150 CPU: 2 UID: 299 PID: 440 Comm: gpsd Not tainted 6.11.0-rc6-00308-gb31c44928842 #1 Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kobject_put+0x120/0x150 lr : kobject_put+0x120/0x150 sp : ffffffc0803d3ae0 x29: ffffffc0803d3ae0 x28: ffffff8042dc9738 x27: 0000000000000001 x26: 0000000000000000 x25: ffffff8042dc9040 x24: ffffff8042dc9440 x23: ffffff80402a4620 x22: ffffff8042ef4bd0 x21: ffffff80405cb600 x20: 000000000008001b x19: ffffff8040b3b6e0 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 696e6920746f6e20 x14: 7369203a29343263 x13: 205d303434542020 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: kobject_put+0x120/0x150 cdev_put+0x20/0x3c __fput+0x2c4/0x2d8 ____fput+0x1c/0x38 task_work_run+0x70/0xfc do_exit+0x2a0/0x924 do_group_exit+0x34/0x90 get_signal+0x7fc/0x8c0 do_signal+0x128/0x13b4 do_notify_resume+0xdc/0x160 el0_svc+0xd4/0xf8 el0t_64_sync_handler+0x140/0x14c el0t_64_sync+0x190/0x194 ---[ end trace 0000000000000000 ]--- ...followed by more symptoms of corruption, with similar stacks: refcount_t: underflow; use-after-free. kernel BUG at lib/list_debug.c:62! Kernel panic - not syncing: Oops - BUG: Fatal exception This happens because pps_device_destruct() frees the pps_device with the embedded cdev immediately after calling cdev_del(), but, as the comment above cdev_del() notes, fops for previously opened cdevs are still callable even after cdev_del() returns. I think this bug has always been there: I can't explain why it suddenly started happening every time I reboot this particular board. In commit d953e0e ("pps: Fix a use-after free bug when unregistering a source."), George Spelvin suggested removing the embedded cdev. That seems like the simplest way to fix this, so I've implemented his suggestion, using __register_chrdev() with pps_idr becoming the source of truth for which minor corresponds to which device. But now that pps_idr defines userspace visibility instead of cdev_add(), we need to be sure the pps->dev refcount can't reach zero while userspace can still find it again. So, the idr_remove() call moves to pps_unregister_cdev(), and pps_idr now holds a reference to pps->dev. pps_core: source serial1 got cdev (251:1) <...> pps pps1: removed pps_core: unregistering pps1 pps_core: deallocating pps1 Fixes: d953e0e ("pps: Fix a use-after free bug when unregistering a source.") Cc: [email protected] Signed-off-by: Calvin Owens <[email protected]> Reviewed-by: Michal Schmidt <[email protected]> Link: https://lore.kernel.org/r/a17975fd5ae99385791929e563f72564edbcf28f.1731383727.git.calvin@wbinvd.org Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 13, 2025
commit ee1b504 upstream. The following kernel oops is thrown when trying to remove the max96712 module: Unable to handle kernel paging request at virtual address 00007375746174db Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000010af89000 [00007375746174db] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: crct10dif_ce polyval_ce mxc_jpeg_encdec flexcan snd_soc_fsl_sai snd_soc_fsl_asoc_card snd_soc_fsl_micfil dwc_mipi_csi2 imx_csi_formatter polyval_generic v4l2_jpeg imx_pcm_dma can_dev snd_soc_imx_audmux snd_soc_wm8962 snd_soc_imx_card snd_soc_fsl_utils max96712(C-) rpmsg_ctrl rpmsg_char pwm_fan fuse [last unloaded: imx8_isi] CPU: 0 UID: 0 PID: 754 Comm: rmmod Tainted: G C 6.12.0-rc6-06364-g327fec852c31 torvalds#17 Tainted: [C]=CRAP Hardware name: NXP i.MX95 19X19 board (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : led_put+0x1c/0x40 lr : v4l2_subdev_put_privacy_led+0x48/0x58 sp : ffff80008699bbb0 x29: ffff80008699bbb0 x28: ffff00008ac233c0 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: ffff000080cf1170 x22: ffff00008b53bd00 x21: ffff8000822ad1c8 x20: ffff000080ff5c00 x19: ffff00008b53be40 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000004 x13: ffff0000800f8010 x12: 0000000000000000 x11: ffff000082acf5c0 x10: ffff000082acf478 x9 : ffff0000800f8010 x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d x5 : 8080808000000000 x4 : 0000000000000020 x3 : 00000000553a3dc1 x2 : ffff00008ac233c0 x1 : ffff00008ac233c0 x0 : ff00737574617473 Call trace: led_put+0x1c/0x40 v4l2_subdev_put_privacy_led+0x48/0x58 v4l2_async_unregister_subdev+0x2c/0x1a4 max96712_remove+0x1c/0x38 [max96712] i2c_device_remove+0x2c/0x9c device_remove+0x4c/0x80 device_release_driver_internal+0x1cc/0x228 driver_detach+0x4c/0x98 bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 i2c_del_driver+0x54/0x64 max96712_i2c_driver_exit+0x18/0x1d0 [max96712] __arm64_sys_delete_module+0x1a4/0x290 invoke_syscall+0x48/0x10c el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xd8 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x190/0x194 Code: f9000bf3 aa0003f3 f9402800 f9402000 (f9403400) ---[ end trace 0000000000000000 ]--- This happens because in v4l2_i2c_subdev_init(), the i2c_set_cliendata() is called again and the data is overwritten to point to sd, instead of priv. So, in remove(), the wrong pointer is passed to v4l2_async_unregister_subdev(), leading to a crash. Fixes: 5814f32 ("media: staging: max96712: Add basic support for MAX96712 GMSL2 deserializer") Signed-off-by: Laurentiu Palcu <[email protected]> Cc: [email protected] Reviewed-by: Niklas Söderlund <[email protected]> Reviewed-by: Ricardo Ribalda <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 13, 2025
commit 17391cb upstream. On pSeries, when user attempts to use the same vfio container used by different iommu group, the spapr_tce_set_window() returns -EPERM and the subsequent cleanup leads to the below crash. Kernel attempted to read user page (308) - exploit attempt? BUG: Kernel NULL pointer dereference on read at 0x00000308 Faulting instruction address: 0xc0000000001ce358 Oops: Kernel access of bad area, sig: 11 [#1] NIP: c0000000001ce358 LR: c0000000001ce05c CTR: c00000000005add0 <snip> NIP [c0000000001ce358] spapr_tce_unset_window+0x3b8/0x510 LR [c0000000001ce05c] spapr_tce_unset_window+0xbc/0x510 Call Trace: spapr_tce_unset_window+0xbc/0x510 (unreliable) tce_iommu_attach_group+0x24c/0x340 [vfio_iommu_spapr_tce] vfio_container_attach_group+0xec/0x240 [vfio] vfio_group_fops_unl_ioctl+0x548/0xb00 [vfio] sys_ioctl+0x754/0x1580 system_call_exception+0x13c/0x330 system_call_vectored_common+0x15c/0x2ec <snip> --- interrupt: 3000 Fix this by having null check for the tbl passed to the spapr_tce_unset_window(). Fixes: f431a8c ("powerpc/iommu: Reimplement the iommu_table_group_ops for pSeries") Cc: [email protected] Reported-by: Vaishnavi Bhat <[email protected]> Signed-off-by: Shivaprasad G Bhat <[email protected]> Signed-off-by: Madhavan Srinivasan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 13, 2025
commit 06f3642 upstream. [BUG] When testing with COW fixup marked as BUG_ON() (this is involved with the new pin_user_pages*() change, which should not result new out-of-band dirty pages), I hit a crash triggered by the BUG_ON() from hitting COW fixup path. This BUG_ON() happens just after a failed btrfs_run_delalloc_range(): BTRFS error (device dm-2): failed to run delalloc range, root 348 ino 405 folio 65536 submit_bitmap 6-15 start 90112 len 106496: -28 ------------[ cut here ]------------ kernel BUG at fs/btrfs/extent_io.c:1444! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 0 UID: 0 PID: 434621 Comm: kworker/u24:8 Tainted: G OE 6.12.0-rc7-custom+ torvalds#86 Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs] pc : extent_writepage_io+0x2d4/0x308 [btrfs] lr : extent_writepage_io+0x2d4/0x308 [btrfs] Call trace: extent_writepage_io+0x2d4/0x308 [btrfs] extent_writepage+0x218/0x330 [btrfs] extent_write_cache_pages+0x1d4/0x4b0 [btrfs] btrfs_writepages+0x94/0x150 [btrfs] do_writepages+0x74/0x190 filemap_fdatawrite_wbc+0x88/0xc8 start_delalloc_inodes+0x180/0x3b0 [btrfs] btrfs_start_delalloc_roots+0x174/0x280 [btrfs] shrink_delalloc+0x114/0x280 [btrfs] flush_space+0x250/0x2f8 [btrfs] btrfs_async_reclaim_data_space+0x180/0x228 [btrfs] process_one_work+0x164/0x408 worker_thread+0x25c/0x388 kthread+0x100/0x118 ret_from_fork+0x10/0x20 Code: aa1403e1 9402f3ef aa1403e0 9402f36f (d4210000) ---[ end trace 0000000000000000 ]--- [CAUSE] That failure is mostly from cow_file_range(), where we can hit -ENOSPC. Although the -ENOSPC is already a bug related to our space reservation code, let's just focus on the error handling. For example, we have the following dirty range [0, 64K) of an inode, with 4K sector size and 4K page size: 0 16K 32K 48K 64K |///////////////////////////////////////| |#######################################| Where |///| means page are still dirty, and |###| means the extent io tree has EXTENT_DELALLOC flag. - Enter extent_writepage() for page 0 - Enter btrfs_run_delalloc_range() for range [0, 64K) - Enter cow_file_range() for range [0, 64K) - Function btrfs_reserve_extent() only reserved one 16K extent So we created extent map and ordered extent for range [0, 16K) 0 16K 32K 48K 64K |////////|//////////////////////////////| |<- OE ->|##############################| And range [0, 16K) has its delalloc flag cleared. But since we haven't yet submit any bio, involved 4 pages are still dirty. - Function btrfs_reserve_extent() returns with -ENOSPC Now we have to run error cleanup, which will clear all EXTENT_DELALLOC* flags and clear the dirty flags for the remaining ranges: 0 16K 32K 48K 64K |////////| | | | | Note that range [0, 16K) still has its pages dirty. - Some time later, writeback is triggered again for the range [0, 16K) since the page range still has dirty flags. - btrfs_run_delalloc_range() will do nothing because there is no EXTENT_DELALLOC flag. - extent_writepage_io() finds page 0 has no ordered flag Which falls into the COW fixup path, triggering the BUG_ON(). Unfortunately this error handling bug dates back to the introduction of btrfs. Thankfully with the abuse of COW fixup, at least it won't crash the kernel. [FIX] Instead of immediately unlocking the extent and folios, we keep the extent and folios locked until either erroring out or the whole delalloc range finished. When the whole delalloc range finished without error, we just unlock the whole range with PAGE_SET_ORDERED (and PAGE_UNLOCK for !keep_locked cases), with EXTENT_DELALLOC and EXTENT_LOCKED cleared. And the involved folios will be properly submitted, with their dirty flags cleared during submission. For the error path, it will be a little more complex: - The range with ordered extent allocated (range (1)) We only clear the EXTENT_DELALLOC and EXTENT_LOCKED, as the remaining flags are cleaned up by btrfs_mark_ordered_io_finished()->btrfs_finish_one_ordered(). For folios we finish the IO (clear dirty, start writeback and immediately finish the writeback) and unlock the folios. - The range with reserved extent but no ordered extent (range(2)) - The range we never touched (range(3)) For both range (2) and range(3) the behavior is not changed. Now even if cow_file_range() failed halfway with some successfully reserved extents/ordered extents, we will keep all folios clean, so there will be no future writeback triggered on them. CC: [email protected] Reviewed-by: Boris Burkov <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
z3ntu
pushed a commit
that referenced
this pull request
Feb 13, 2025
commit c2b47df upstream. [BUG] With CONFIG_DEBUG_VM set, test case generic/476 has some chance to crash with the following VM_BUG_ON_FOLIO(): BTRFS error (device dm-3): cow_file_range failed, start 1146880 end 1253375 len 106496 ret -28 BTRFS error (device dm-3): run_delalloc_nocow failed, start 1146880 end 1253375 len 106496 ret -28 page: refcount:4 mapcount:0 mapping:00000000592787cc index:0x12 pfn:0x10664 aops:btrfs_aops [btrfs] ino:101 dentry name(?):"f1774" flags: 0x2fffff80004028(uptodate|lru|private|node=0|zone=2|lastcpupid=0xfffff) page dumped because: VM_BUG_ON_FOLIO(!folio_test_locked(folio)) ------------[ cut here ]------------ kernel BUG at mm/page-writeback.c:2992! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 2 UID: 0 PID: 3943513 Comm: kworker/u24:15 Tainted: G OE 6.12.0-rc7-custom+ torvalds#87 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs] pc : folio_clear_dirty_for_io+0x128/0x258 lr : folio_clear_dirty_for_io+0x128/0x258 Call trace: folio_clear_dirty_for_io+0x128/0x258 btrfs_folio_clamp_clear_dirty+0x80/0xd0 [btrfs] __process_folios_contig+0x154/0x268 [btrfs] extent_clear_unlock_delalloc+0x5c/0x80 [btrfs] run_delalloc_nocow+0x5f8/0x760 [btrfs] btrfs_run_delalloc_range+0xa8/0x220 [btrfs] writepage_delalloc+0x230/0x4c8 [btrfs] extent_writepage+0xb8/0x358 [btrfs] extent_write_cache_pages+0x21c/0x4e8 [btrfs] btrfs_writepages+0x94/0x150 [btrfs] do_writepages+0x74/0x190 filemap_fdatawrite_wbc+0x88/0xc8 start_delalloc_inodes+0x178/0x3a8 [btrfs] btrfs_start_delalloc_roots+0x174/0x280 [btrfs] shrink_delalloc+0x114/0x280 [btrfs] flush_space+0x250/0x2f8 [btrfs] btrfs_async_reclaim_data_space+0x180/0x228 [btrfs] process_one_work+0x164/0x408 worker_thread+0x25c/0x388 kthread+0x100/0x118 ret_from_fork+0x10/0x20 Code: 910a8021 a90363f7 a9046bf9 94012379 (d4210000) ---[ end trace 0000000000000000 ]--- [CAUSE] The first two lines of extra debug messages show the problem is caused by the error handling of run_delalloc_nocow(). E.g. we have the following dirtied range (4K blocksize 4K page size): 0 16K 32K |//////////////////////////////////////| | Pre-allocated | And the range [0, 16K) has a preallocated extent. - Enter run_delalloc_nocow() for range [0, 16K) Which found range [0, 16K) is preallocated, can do the proper NOCOW write. - Enter fallback_to_fow() for range [16K, 32K) Since the range [16K, 32K) is not backed by preallocated extent, we have to go COW. - cow_file_range() failed for range [16K, 32K) So cow_file_range() will do the clean up by clearing folio dirty, unlock the folios. Now the folios in range [16K, 32K) is unlocked. - Enter extent_clear_unlock_delalloc() from run_delalloc_nocow() Which is called with PAGE_START_WRITEBACK to start page writeback. But folios can only be marked writeback when it's properly locked, thus this triggered the VM_BUG_ON_FOLIO(). Furthermore there is another hidden but common bug that run_delalloc_nocow() is not clearing the folio dirty flags in its error handling path. This is the common bug shared between run_delalloc_nocow() and cow_file_range(). [FIX] - Clear folio dirty for range [@start, @cur_offset) Introduce a helper, cleanup_dirty_folios(), which will find and lock the folio in the range, clear the dirty flag and start/end the writeback, with the extra handling for the @locked_folio. - Introduce a helper to clear folio dirty, start and end writeback - Introduce a helper to record the last failed COW range end This is to trace which range we should skip, to avoid double unlocking. - Skip the failed COW range for the error handling CC: [email protected] Reviewed-by: Boris Burkov <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
boots postmarket to debug shell