basic information

This repository contains my configuration for a ts7260 root filesystem. It's my goal to build a openwrt image with this configuration file which should work with the kernel based on the linux 2.6 kernel from ynezz

installation

Basicly, these are the steps I took:

1. svn co svn://svn.openwrt.org/openwrt/trunk/ openwrt which was the command I found on https://dev.openwrt.org/wiki/GetSource. I used the trunk version because the current 10.03.1 has no ep93xx support.

2. Create an env directory and initiate the git repository. This can also be done by running scripts/env list

3. Clone this repository into your env directory.

Running make should create the same image as I am. :-)

compiling kernel

As far as I know I just checked out the tree from ynezz and build it by creating the configuration file on the normal way: make ARCH=arm ts72xx_defconfig. I had to enable the console to see something on /dev/ttyAM0. CONFIG_SERIAL_8250 and CONFIG_SERIAL_8250_CONSOLE are enabled in my config. Building the modules was done by simply run make INSTALL_MOD_PATH=$(pwd)/../modules modules_install which installed the modules in the ../modules directory. I manually added the modules to my image.

links

• The ynezz repository which gave me the idea of building my own kernel
• I've found a mirror of openwrt on hithub It will probably be usefull for further development.