DIRIGERA Binding

Binding supporting the DIRIGERA Gateway from IKEA.

It provides devices and scenes towards openHAB. With this it's possible to connect them with other devices outside of the IKEA world.

The goal is not to provide similar functionality of the IKEA Home Smart App like create / remove scenes, rename devices or handling rooms.

Supported Things

The DIRIGERA bridge is providing the connection to all devices and scenes.

Refer to below sections which devices are supported and are covered by things connected to the DIRIGERA bridge.

ThingTypeUUID	Description	Tested	Section	Products
gateway	IKEA Gateway for smart products	personally	Gateway	DIRIGERA
air-purifier	Air cleaning device with particle filter	no	Air Purifier	STARKVIND
air-quality	Air measure for temperature, humidity and particles	no	Sensors	VINDSTYRKA
blind	Window or door blind	no	Blinds	PRAKTLYSING ,KADRILJ ,FRYKTUR, TREDANSEN
blind-controller	Controller to open and close blinds	no	Controller	TRÅDFRI
switch-light	Light with switch ON, OFF capability	no	Lights	TRÅDFRI
dimmable-light	Light with brightness support	no	Lights	TRÅDFRI
temperature-light	Light with color temperature support	personally	Lights	TRÅDFRI, FLOALT
color-light	Light with color support	personally	Lights	TRÅDFRI, ORMANÅS
light-controller	Controller to handle light attributes	personally	Controller	TRÅDFRI, RODRET,STYRBAAR
motion-sensor	Sensor detecting motion events	no	Sensors	TRÅDFRI
motion-light-sensor	Sensor detecting motion events and measures light level	personally	Sensors	VALLHORN
single-shortcut	Shortcut controller with one button	no	Controller	TRÅDFRI
double-shortcut	Shortcut controller with two buttons	personally	Controller	SOMRIG
simple-plug	Switchable power plug	no	Plugs	TRÅDFRI, ÅSKVÄDER
power-plug	Switchable power plug with status light and child lock	personally	Plugs	TRETAKT
smart-plug	Switchable plug with electricity measurements	personally	Plugs	INSPELNING
speaker	Speaker with player activities	personally	Speaker	SYMFONISK
sound-controller	Controller for speakers	no	Controller	SYMFONISK, TRÅDFRI
contact-sensor	Sensor tracking if windows or doors are open	personally	Sensors	PARASOLL
water-sensor	Sensor to detect water leaks	no	Sensors	BADRING
repeater	Repeater to strengthen signal	personally	Repeater	TRÅDFRI
scene	Scene from IKEA home smart App which can be triggered	personally	Scenes	-

Discovery

The discovery will try to identify your DIRIGERA Gateway. This may take some time because your whole network is scanned in order to find it.

Before adding the bridge read Pairing section.

Devices connected to this bridge will be detected automatically unless you don't switch it off in Bridge Configuration

Gateway Bridge

Bridge Configuration

Name	Type	Description	Default	Required
ipAddress	text	DIRIGERA IP Address	N/A	yes
id	text	Unique id of this gateway	N/A	no
discovery	boolean	Configure if paired devices shall be detected by discovery	true	no

• ipAddress - use discovery to obtain this value automatically or enter it manually if known
• id - will be detected automatically after successful pairing
• discovery - will run continuously in the background and detect new, deleted or changed devices. Switch it off to deactivate discovery

Gateway Pairing

First setup requires pairing the DIRIGERA gateway with openHAB. You need physical access to the gateway to finish pairing so ensure you can reach it quickly.

Let's start pairing

1. Add the bridge found in discovery
2. Pairing started automatically after creation!
3. Press the button on the DIRIGERA rear site
4. Your brdige shall switch to ONLINE

Gateway Channels

Channel	Type	Read/Write	Description	Advanced
pairing	Switch	RW	Sets DIRIGERA hub into pairing mode
location	Location	R(W)	Location in lat.,lon. coordinates
sunrise	DateTime	R	Date and time of next sunrise
sunset	DateTime	R	Date and time of next sunset
statistics	String	R	Several statistics about gateway activities
ota-status	Number	R	Over-the-air overall status
ota-state	Number	R	Over-the-air current state	X
ota-progress	Number	R	Over-the-air current progress	X

Channel location isn't writeable yet. See Gateway Limitations for further infomration.

OTA Mappings

Mappings for ota-status

• 0 : Up to date
• 1 : Update available

Mappings for ota-state

• 0 : Ready to check
• 1 : Check in progress
• 2 : Ready to download
• 3 : Download in progress
• 4 : Update in progress
• 5 : Update failed
• 6 : Ready to update
• 7 : Check failed
• 8 : Download failed
• 9 : Update complete
• 10 : Battery check failed

Follow Sun

Motion Sensors can be active all the time or follow a schedule. One schedule is follow the sun which needs to be activated in the DIRIGERA GATEWAY.

Things

The binding is in development phase alpha. Goal is to extend testing in the community to cover as many as possible old and new devices. Your help is needed to extend and fix the current implementation.

Unknown Devices

Filter your traces regarding 'DIRIGERA MODEL Unsuppoerted Device'. The trace cotains a json object at the end which is needed to implememnt a corresponding hanlder.

Thing Configuration

Each thing is identified by a unique id which is mandatory to configure. Discovery will automatically identify the id.

Name	Type	Description	Default	Required
id	text	Unique id of this device / scene	N/A	yes

Thing Properties

Each thing has properties attached for identification.

Air Purifier

Air cleaning device with particle filter.

Channel	Type	Read/Write	Description	Advanced
fan-mode	Number	RW	Fan on, off, speed or automatic behavior
fan-speed	Dimmer	RW	Manual regulation of fan speed
fan-runtime	Number:Time	R	Fan runtime in minutes
filter-elapsed	Number:Time	R	Filter elapsed time in minutes
filter-remain	Number:Time	R	Time to filter replacement in minutes
filter-lifetime	Number:Time	R	Filter lifetime in minutes
filter-alarm	Switch	R	Filter alarm signal
particulate-matter	Number:Density	R	Category 2.5 particulate matter
disable-light	Switch	RW	Disable status light on plug
child-lock	Switch	RW	Child lock for button on plug
custom-name	String	RW	Name given from IKEA home smart
ota-status	Number	R	Over-the-air overall status
ota-state	Number	R	Over-the-air current state	X
ota-progress	Number	R	Over-the-air current progress	X

There are several Number:Time which are delivered in minutes as default. Note you can change the unit when connecting an item e.g. to d (days) for readability. So you can check in a rule if your remaining filter time is going below 7 days instead of calculating minutes.

Air Purifier Channel Mappings

Mappings for fan-mode

• 0 : Auto
• 1 : Low
• 2 : Medium
• 3 : High
• 4 : On
• 5 : Off

See OTA channel mappings for over the air updates.

Blinds

Window or door blind.

Channel	Type	Read/Write	Description	Advanced
blind-state	Number	RW	State if blind is moving up, down or stopped
blind-level	Dimmer	RW	Current blind level
battery-level	Number:Dimensionless	R	Battery charge level in percent
custom-name	String	RW	Name given from IKEA home smart
ota-status	Number	R	Over-the-air overall status
ota-state	Number	R	Over-the-air current state	X
ota-progress	Number	R	Over-the-air current progress	X
links	String	RW	Linked controllers and sensors	X
link-candidates	String	RW	Candidates which can be linked	X

See OTA channel mappings for over the air updates. See section Links and Candidates how to handle channels links and link-candidates.

Blind Channel Mappings

Mappings for blind-state

• 0 : Stopped
• 1 : Up
• 2 : Down

See OTA channel mappings for over the air updates.

Lights

Light devices in several variants. Can be light bulbs, LED stripes, remote driver and more. Configuration contains

Name	Type	Description	Default	Required
id	text	Unique id of this device / scene	N/A	yes
fadeTime	integer	Required time for fade sequnce to color or brightness	750	yes
fadeSequence	integer	Define sequence if several light parameters are changed at once	0	yes

fadeTime adjust fading time according to your device. Current behavior shows commands are acknowledged while device is fading but not executed correctly. So they need to be executed one after another. Maybe an update of the DIRIGERA gateway will change the current behavior and you can reduce them afterwards.

fadeSequence is only for Color Lights. Through hsb channel it's possible to adapt color brightness at once. Again due to fading times they need to be executed in a sequence. You can choose between options

• 0: First brightness, then color
• 1: First color, then brightness

Lights ON OFF Behavior

When light is ON each command will change the settings accordingly immediately. During power OFF the lights will preserve some values until next power ON.

Channel	Type	Behavior
power	ON	Switch ON, apply last / stored values
brightness	ON	Switch ON, apply last / stored values
brightness	value > 0	Switch ON, apply this brighness, apply last / stored values
color-temperature	ON	Switch ON, apply last / stored values
color-temperature	any	Store value, brightness stays at previous level
color	ON	Switch ON, apply last / stored values
color	value > 0	Switch ON, apply this brighness, apply last / stored values
color	h,s,b	Store color and brightness for next ON
outside		Switch ON, apply last / stored values

Switch Lights

Light with switch ON, OFF capability

Channel	Type	Read/Write	Description	Advanced
power	Switch	RW	Power state of light
startup	Number	RW	Startup behavior after power cutoff
custom-name	String	RW	Name given from IKEA home smart
ota-status	Number	R	Over-the-air overall status
ota-state	Number	R	Over-the-air current state	X
ota-progress	Number	R	Over-the-air current progress	X
links	String	RW	Linked controllers and sensors	X
link-candidates	String	RW	Candidates which can be linked	X

See sartup mappings for device startup behavior. See OTA channel mappings for over the air updates. See section Links and Candidates how to handle channels links and link-candidates.

Dimmable Lights

Light with brightness support.

Channel	Type	Read/Write	Description	Advanced
power	Switch	RW	Power state of light
brightness	Dimmer	RW	Control brightness of light
startup	Number	RW	Startup behavior after power cutoff
custom-name	String	RW	Name given from IKEA home smart
ota-status	Number	R	Over-the-air overall status
ota-state	Number	R	Over-the-air current state	X
ota-progress	Number	R	Over-the-air current progress	X
links	String	RW	Linked controllers and sensors	X
link-candidates	String	RW	Candidates which can be linked	X

Channel brightness can receive

• ON / OFF
• numbers from 0 to 100 as percent where 0 will switch the light OFF, any other > 0 switches light ON

See sartup mappings for device startup behavior. See OTA channel mappings for over the air updates. See section Links and Candidates how to handle channels links and link-candidates.

Startup Channel Mappings

The startup defines how the device shall behave after a power cutoff. If there's a dedicated hardwired light switch which cuts power towards the bulb it makes sense to sitch them on every time the switch is pressed. But it's also possible to recover the last state.

Mappings for startup

• 0 : Previous
• 1 : On
• 2 : Off
• 3 : Switch

Option 3 is offered in IKEA Smart home app to control ligths with using your normal light switch slowly and smooth. With this the light shall stay online. I wasn't able to reproduce this behavior at all. Maybe somebody has more success.

See OTA channel mappings for over the air updates.

Temperature Lights

Light with color temperature support.

Channel	Type	Read/Write	Description	Advanced
power	Switch	RW	Power state of light
brightness	Dimmer	RW	Control brightness of light
color-temperature	Dimmer	RW	Color temperature from cold (0 %) to warm (100 %)
startup	Number	RW	Startup behavior after power cutoff
custom-name	String	RW	Name given from IKEA home smart
ota-status	Number	R	Over-the-air overall status
ota-state	Number	R	Over-the-air current state	X
ota-progress	Number	R	Over-the-air current progress	X
links	String	RW	Linked controllers and sensors	X
link-candidates	String	RW	Candidates which can be linked	X

Channel brightness can receive

• ON / OFF
• numbers from 0 to 100 as percent where 0 will switch the light OFF, any other > 0 switches light ON

See sartup mappings for device startup behavior. See OTA channel mappings for over the air updates. See section Links and Candidates how to handle channels links and link-candidates.

Color Lights

Light with color support.

Channel	Type	Read/Write	Description	Advanced
power	Switch	RW	Power state of light
brightness	Dimmer	RW	Brightness of light in percent
color-temperature	Dimmer	RW	Color temperature from cold (0 %) to warm (100 %)
color	Color	RW	Color of light with hue, saturation and brightness
startup	Number	RW	Startup behavior after power cutoff
custom-name	String	RW	Name given from IKEA home smart
ota-status	Number	R	Over-the-air overall status
ota-state	Number	R	Over-the-air current state	X
ota-progress	Number	R	Over-the-air current progress	X
links	String	RW	Linked controllers and sensors	X
link-candidates	String	RW	Candidates which can be linked	X

Channel color can receive

• ON / OFF
• numbers from 0 to 100 as brightness in percent where 0 will switch the light OFF, any other > 0 switches light ON
• triple values for hue, saturation, brightness

See sartup mappings for device startup behavior. See OTA channel mappings for over the air updates. See section Links and Candidates how to handle channels links and link-candidates.

Power Plugs

Power plugs in different variants.

Simple Plug

Simple plug with control of power state and startup behavior.

Channel	Type	Read/Write	Description	Advanced
power	Switch	RW	Power state of plug
startup	Number	RW	Startup behavior after power cutoff
custom-name	String	RW	Name given from IKEA home smart
ota-status	Number	R	Over-the-air overall status
ota-state	Number	R	Over-the-air current state	X
ota-progress	Number	R	Over-the-air current progress	X
links	String	RW	Linked controllers and sensors	X
link-candidates	String	RW	Candidates which can be linked	X

See sartup mappings for device startup behavior. See OTA channel mappings for over the air updates. See section Links and Candidates how to handle channels links and link-candidates.

Power Plug

Power plug with control of power state, startup behavior, hardware on/off button and status light. Same channels as Simple Plug plus following channels.

Channel	Type	Read/Write	Description	Advanced
child-lock	Switch	RW	Child lock for button on plug
disable-light	Switch	RW	Disable status light on plug

Smart Power Plug

Smart plug like Power Plug plus measuring capability.

Channel	Type	Read/Write	Description	Advanced
electric-power	Number:Power	R	Electric power delivered by plug
energy-total	Number:Energy	R	Total energy consumption
energy-reset	Number:Energy	R	Energy consumption since last reset
reset-date	DateTime	RW	Date and time of last reset
electric-current	Number:ElectricCurrent	R	Electric current measured by plug
electric-voltage	Number:ElectricPotential	R	Electric potential of plug

Smart plug provides energy-total measuring energy consumption over lifetime and energy-reset measuring energy consumption from reset-date till now. Channel reset-date is writable and will set the date time to the timestamp of command execution. Past and future timestamps are not possible and will be ignored.

Sensors

Various sensors for detecting events and measuring.

Motion Sensor

Sensor detecting motion events.

Channel	Type	Read/Write	Description	Advanced
motion	Switch	R	Motion detected by the device
active-duration	Number:Time	RW	Keep connected devices active for this duration
battery-level	Number:Dimensionless	R	Battery charge level in percent
schedule	Number	RW	Schedule when the sensor shall be active
schedule-start	DateTime	RW	Start time of sensor activity
schedule-end	DateTime	RW	End time of sensor activity
light-preset	String	RW	Light presets for different times of the day
custom-name	String	RW	Name given from IKEA home smart
ota-status	Number	R	Over-the-air overall status
ota-state	Number	R	Over-the-air current state	X
ota-progress	Number	R	Over-the-air current progress	X
links	String	RW	Linked controllers and sensors	X
link-candidates	String	RW	Candidates which can be linked	X

When motion is detected via motion channel all connected devices from links channel will be active for the time configured in active-duration. Standard duration is seconds if raw number is sent as command. See Motion Sensor Rules for further examples.

Mappings for schedule

• 0 : Always, sensor is always active
• 1 : Follow sun, sensor gets active at sunset and deactivates at sunrise
• 2 : Schedule, custom schedule with manual start and end time

If option 1, follow sun is selected ensure you gave the permission in the IKEA smart home app to use your GPS position to calculate times for sunrise and sunset.

See Light Controller for light-preset`.

See OTA channel mappings for over the air updates. See section Links and Candidates how to handle channels links and link-candidates.

Motion Light Sensor

Sensor detecting motion events and measures light level. Same channels as Motion Sensor with an additional illuminance channel.

Channel	Type	Read/Write	Description	Advanced
illuminance	Number:Illuminance	R	Illuminance in Lux

Water Sensor

Sensor to detect water leaks.

Channel	Type	Read/Write	Description	Advanced
leak	Switch	R	Water leak detected
battery-level	Number:Dimensionless	R	Battery charge level in percent
custom-name	String	RW	Name given from IKEA home smart
ota-status	Number	R	Over-the-air overall status
ota-state	Number	R	Over-the-air current state	X
ota-progress	Number	R	Over-the-air current progress	X

See OTA channel mappings for over the air updates.

Contact Sensor

Sensor tracking if windows or doors are open

Channel	Type	Read/Write	Description	Advanced
contact	Contact	R	State if door or window is open or closed
battery-level	Number:Dimensionless	R	Battery charge level in percent
custom-name	String	RW	Name given from IKEA home smart

Air Quality Sensor

Air measure for temperature, humidity and particles.

Channel	Type	Read/Write	Description	Advanced
temperature	Number:Temperature	R	Air Temperature
humidity	Number:Dimensionless	R	Air Humidity
particulate-matter	Number:Density	R	Category 2.5 particulate matter
voc-index	Number:Density	R	Volatile organic compounds measure
custom-name	String	RW	Name given from IKEA home smart
ota-status	Number	R	Over-the-air overall status
ota-state	Number	R	Over-the-air current state	X
ota-progress	Number	R	Over-the-air current progress	X

See OTA channel mappings for over the air updates.

Controller

Controller for lights, plugs, blinds, shortcuts and speakers.

Single Shortcut Controller

Shortcut controller with one button.

Channel	Type	Read/Write	Description	Advanced
button1	trigger		Trigger of first button
battery-level	Number:Dimensionless	R	Battery charge level in percent
custom-name	String	RW	Name given from IKEA home smart
ota-status	Number	R	Over-the-air overall status
ota-state	Number	R	Over-the-air current state	X
ota-progress	Number	R	Over-the-air current progress	X

See OTA channel mappings for over the air updates.

Button Triggers

Triggers for button1

• SHORT_PRESSED
• DOUBLE_PRESSED
• LONG_PRESSED

Double Shortcut Controller

Shortcut controller with two buttons.

Channel	Type	Read/Write	Description	Advanced
button2	trigger		Trigger of second button

Same as Single Shortcut Controller with additional button2 trigger channel.

Light Controller

Controller to handle light attributes.

Channel	Type	Read/Write	Description	Advanced
battery-level	Number:Dimensionless	R	Battery charge level in percent
light-preset	String	RW	Light presets for different times of the day
custom-name	String	RW	Name given from IKEA home smart
ota-status	Number	R	Over-the-air overall status
ota-state	Number	R	Over-the-air current state	X
ota-progress	Number	R	Over-the-air current progress	X
links	String	RW	Linked controllers and sensors	X
link-candidates	String	RW	Candidates which can be linked	X

Channel light-preset provides a JSON array with time an light settings for different times. If light is switched on by the controller the light attributes for the configured time section is used. This only works for connected devices schown in channel links.

IKEA provided some presets which can be selected but it's also possible to generate a custom schedule. They are provided as options as strings

• Warm
• Slowdown
• Smooth
• Bright

This feature is from IKEA test center and not officially present in the IKEA Smart home app now.

See OTA channel mappings for over the air updates. See section Links and Candidates how to handle channels links and link-candidates.

Blind Controller

Controller to open and close blinds.

Channel	Type	Read/Write	Description	Advanced
battery-level	Number:Dimensionless	R	Battery charge level in percent
custom-name	String	RW	Name given from IKEA home smart
ota-status	Number	R	Over-the-air overall status
ota-state	Number	R	Over-the-air current state	X
ota-progress	Number	R	Over-the-air current progress	X
links	String	RW	Linked controllers and sensors	X
link-candidates	String	RW	Candidates which can be linked	X

See OTA channel mappings for over the air updates. See section Links and Candidates how to handle channels links and link-candidates.

Sound Controller

Controller for speakers.

Channel	Type	Read/Write	Description	Advanced
battery-level	Number:Dimensionless	R	Battery charge level in percent
custom-name	String	RW	Name given from IKEA home smart
ota-status	Number	R	Over-the-air overall status
ota-state	Number	R	Over-the-air current state	X
ota-progress	Number	R	Over-the-air current progress	X
links	String	RW	Linked controllers and sensors	X
link-candidates	String	RW	Candidates which can be linked	X

See OTA channel mappings for over the air updates. See section Links and Candidates how to handle channels links and link-candidates.

Speaker

Speaker with player activities.

Channel	Type	Read/Write	Description	Advanced
media-control	Player	RW	Media control play, pause, next, previous
volume	Dimmer	RW	Handle volume in percent
mute	Switch	R(W)	Mute current audio without stop playing
shuffle	Switch	RW	Control shuffle mode
crossfade	Switch	RW	Cross fading between tracks
repeat	Number	RW	Over-the-air overall status
media-title	String	R	Title of a played media file
image	RawType	R	Current playing track image
custom-name	String	RW	Name given from IKEA home smart
links	String	RW	Linked controllers and sensors	X
link-candidates	String	RW	Candidates which can be linked	X

See section Links and Candidates how to handle channels links and link-candidates. Channel mute should be writable but this isnn't the case now. See Known Limitations.

Repeater

Repeater to strengthen signal.

Channel	Type	Read/Write	Description	Advanced
custom-name	String	RW	Name given from IKEA home smart
ota-status	Number	R	Over-the-air overall status
ota-state	Number	R	Over-the-air current state	X
ota-progress	Number	R	Over-the-air current progress	X

Scenes

Scene from IKEA home smart App which can be triggered.

Channel	Type	Read/Write	Description	Advanced
trigger	Number	RW	Trigger / undo scene execution
last-trigger	DateTime	R	Date and time when last trigger occurred	X

Scenes are defined in IKEA home samrt App and can be perfomred via trigger channel. Two commands are defined:

• 0 : Trigger
• 1 : Undo

If command 0 (Trigger) is sent scene will be executed. There's a 30 seconds timeslot to send command 1 (Undo). The countdown is updating trigger channel state which can be evaluated if an undo operation is still possible. State will switch to Undef after countdown.

Links and Candidates

Several devices can be linked together like

• Light Controller and Motion Sensors to Plugs and Lights
• Blind Controller to Blinds
• Sound Controller to Speakers

Established links are shown in channel links. The linked devices can be clicked in the UI and the link will be removed.

Possible candidates to be linked are shown in channel link-candidates. If a candidate is clicked in the UI the link will be established.

Candidates and links marked with (!) are not present in openHAB environment so no handler is created yet. In this case it's possible not all links are shown in the UI, but the present ones shall work.

Known Limitatios

Gateway Limitations

Gateway channel location is reflecting the state correctly but isn't writeable. The Model says it canReceive command coordinates but in fact sending responds http status 400. Channel will stay in this binding hoping a DIRIGERA software update will resolve this issue.

Speaker Limitations

Speaker channel mute is reflecting the state correctly but isn't writeable. The Model says it canReceive command isMuted but in fact sending responds http status 400. If mute is performed on Sonos App the channel is updating correctly, but sending the command fails! Channel will stay in this binding hoping a DIRIGERA software update will resolve this issue.

Development and Testing

Debugging is essential for such a binding which supports many available products and needs to support future products. General debug messages will overflow traces and it's hard to find relevant information. To deal with these challenges Thing Actions are provided to support that.

You can call these actions via rules or get the results via openHAB Developer Tools - API Explorer

[
  {
    "actionUid": "dirigera.dumpToken",
    "label": "Dump Gateway Token",
    "description": "Dumps the current token to get access towards DIRIGERA gateway",
    "inputs": [],
    "outputs": []
  },
  {
    "actionUid": "dirigera.dumpJSON",
    "label": "Dump Device JSON Data",
    "description": "Dumps the current JSON data connected to this device",
    "inputs": [],
    "outputs": []
  },
  {
    "actionUid": "dirigera.setDebug",
    "label": "Device Debug Flag",
    "description": "Enables / disables debug message on info level for this specific device",
    "inputs": [
      {
        "name": "p0",
        "type": "boolean",
        "label": "",
        "description": "",
        "required": false,
        "tags": [],
        "reference": "",
        "defaultValue": ""
      }
    ],
    "outputs": []
  }
]

dumpToken

The token can be obtained from any thing connected to DIRIGERA gateway.

    val dishwasherDebugActions = getActions("dirigera","dirigera:smart-plug:myhome:dishwasher")  
    val token = dishwasherDebugActions.dumpToken
    logInfo("DIRIGERA","Token {}",token)

With token available you can test also your devices vai curl commands.

curl -X PATCH https://$YOUR_IP:8443/v1/devices/$DEVICE -H 'Authorization: Bearer $TOKEN' -H 'Content-Type: application/json' -d '[{"attributes":{"colorHue":280,"colorSaturation":1}}]' --insecure

Replace content in curl command with following variables:

• $YOUR_IP - ip address of DIRIGERA gateway
• $DEVICE - bulb id you want to control, take it from configuration
• $TOKEN - shortly stop / start DIRIGERA bridge and search for obtained token

dumpJSON

Dumps the current JSON with attributes and capabilities of one device. If thing UID from gateway is given dumo contains all devices connected to gateway.

    val gatewayActions = getActions("dirigera","dirigera:gateway:myhome")  
    // dumps your complete home
    val json = gatewayActions.dumpJSON
    logInfo("DIRIGERA","JSON {}",json)

setDebug

Enables logging for one specific device. Setting to true you'll see

• openhAB commands send to device handler
• API calls towards gateway
• responses from gateway
• state updates

    val dishwasherDebugActions = getActions("dirigera","dirigera:gateway:myhome")  
    // dumps your complete home
    dishwasherDebugActions.setDebug(true)
    logInfo("DIRIGERA","JSON {}",json)

Full Example

Thing Configuration

Bridge dirigera:gateway:myhome                      "My wonderful Home"         [ ipAddress="1.2.3.4", discovery=true ] {
    Thing temperature-light     living-room-bulb    "Living Room Table Lamp"    [ id="aaaaaaaa-bbbb-xxxx-yyyy-zzzzzzzzzzzz"]
    Thing smart-plug            dishwasher          "Dishwasher"                [ id="zzzzzzzz-yyyy-xxxx-aaaa-bbbbbbbbbbbb"]
    Thing motion-sensor         bedroom-motion      "Bedroom Motion"            [ id="zzzzzzzz-yyyy-xxxx-aaaa-ffffffffffff"]
}

Item Configuration

Switch                      Bedroom_Motion_Detection        { channel="dirigera:motion-sensor:myhome:bedroom-motion:motion" }
Number:Time                 Bedroom_Motion_Active_Duration  { channel="dirigera:motion-sensor:myhome:bedroom-motion:active-duration" }
Number                      Bedroom_Motion_Schedule         { channel="dirigera:motion-sensor:myhome:bedroom-motion:schedule" }
DateTime                    Bedroom_Motion_Schedule_Start   { channel="dirigera:motion-sensor:myhome:bedroom-motion:schedule-start" }
DateTime                    Bedroom_Motion_Schedule_End     { channel="dirigera:motion-sensor:myhome:bedroom-motion:schedule-end" }
Number:Dimensionless        Bedroom_Motion_Battery_Level    { channel="dirigera:motion-sensor:myhome:bedroom-motion:battery-level" }

Switch                      Table_Lamp_Power_State      { channel="dirigera:temperature-light:myhome:living-room-bulb:power" }
Dimmer                      Table_Lamp_Brightness       { channel="dirigera:temperature-light:myhome:living-room-bulb:brightness" }
Dimmer                      Table_Lamp_Temperature      { channel="dirigera:temperature-light:myhome:living-room-bulb:color-temperature" }
Number                      Table_Lamp_Startup          { channel="dirigera:temperature-light:myhome:living-room-bulb:startup" }
Number                      Table_Lamp_OTA_Status       { channel="dirigera:temperature-light:myhome:living-room-bulb:ota-status" }
Number                      Table_Lamp_OTA_State        { channel="dirigera:temperature-light:myhome:living-room-bulb:ota-state" }
Number                      Table_Lamp_OTA_Progress     { channel="dirigera:temperature-light:myhome:living-room-bulb:ota-progress" }
String                      Table_Lamp_JSON             { channel="dirigera:temperature-light:myhome:living-room-bulb:json" }

Switch                      Dishwasher_Power_State      { channel="dirigera:smart-plug:myhome:dishwasher:power" }
Switch                      Dishwasher_Child_lock       { channel="dirigera:smart-plug:myhome:dishwasher:child-lock" }
Switch                      Dishwasher_Disable_Light    { channel="dirigera:smart-plug:myhome:dishwasher:disable-light" }
Number:Power                Dishwasher_Power            { channel="dirigera:smart-plug:myhome:dishwasher:electric-power" }
Number:Energy               Dishwasher_Energy_Total     { channel="dirigera:smart-plug:myhome:dishwasher:energy-total" }
Number:Energy               Dishwasher_Energy_Reset     { channel="dirigera:smart-plug:myhome:dishwasher:energy-reset" }
Number:ElectricCurrent      Dishwasher_Ampere           { channel="dirigera:smart-plug:myhome:dishwasher:electric-current" }
Number:ElectricPotential    Dishwasher_Voltage          { channel="dirigera:smart-plug:myhome:dishwasher:electric-potential" }
Number                      Dishwasher_Startup          { channel="dirigera:smart-plug:myhome:dishwasher:startup" }
Number                      Dishwasher_OTA_Status       { channel="dirigera:smart-plug:myhome:dishwasher:ota-status" }
Number                      Dishwasher_OTA_State        { channel="dirigera:smart-plug:myhome:dishwasher:ota-state" }
Number                      Dishwasher_OTA_Progress     { channel="dirigera:smart-plug:myhome:dishwasher:ota-progress" }
String                      Dishwasher_JSON             { channel="dirigera:smart-plug:myhome:dishwasher:json" }

Rule Examples

Shortcut Controller Rules

Catch triggers from shortcut controller and trigger a scene.

rule "Shortcut Button 1 Triggers"
when
    Channel 'dirigera:double-shortcut:myhome:my-shortcut-controller:button1' triggered
then
    logInfo("DIRIGERA","Button 1 {}",receivedEvent)
    myhome-light-scene.sendCommand(0)
end

Motion Sensor Rules

Change the active duration time

rule "Sensor configuration"
when
    System started
then
    logInfo("DIRIGERA","Configuring Ikea sensors")
    // active duration = 180 seconds
    Bedroom_Motion_Active_Duration.sendCommand(180)
    // active duration = 3 minutes aka 180 seconds
    Bedroom_Motion_Active_Duration.sendCommand("3 min")
end

Credits

This work is based on Leggin and dvdgeisler. Without these contributions this binding wouldn't be possible!