Update optoe driver to add CMIS (QSFP-DD, OSFP, ...) support (sonic-n…

…et#96)

* Update to optoe driver to improve EOF handling

	Added patch: 'driver-support-optoe-EOF_fix.patch' to patch directory
	Added the patch to 'series

Signed-off-by: Don Bollinger

* Patch to add support for CMIS (QSFP-DD, OSFP, ...) class devices
to optoe driver.  Backward compatible, still supports SFP*, QSFP*

patch/driver-support-optoe-QSFP_DD.patch

@@ -0,0 +1,149 @@
+From 3e212b8886a21fad8df621992b00b6bd1f5a7f16 Mon Sep 17 00:00:00 2001
+From: Don Bollinger <[email protected]>
+Date: Sat, 3 Aug 2019 12:06:05 -0700
+Subject: [PATCH] drivers/misc/eeprom: Support QSFP-DD (CMIS) type
+ devices
+
+   Add support for CMIS devices (QSFP-DD, OSFP, etc) to optoe driver
+   Backward compatible, still supports SFP* and QSFP* devices
+   Note: CMIS devices are 'optoe3' (SFP remain optoe2, QSFP optoe1)
+
+Signed-off-by: Don Bollinger <[email protected]>
+---
+ drivers/misc/eeprom/optoe.c | 61 +++++++++++++++++++++++++++++++++++++----
+ 1 file changed, 56 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/misc/eeprom/optoe.c b/drivers/misc/eeprom/optoe.c
+index c22b92a..16287fd 100644
+--- a/drivers/misc/eeprom/optoe.c
++++ b/drivers/misc/eeprom/optoe.c
+@@ -97,6 +97,13 @@
+  * In anticipation of future applications and devices, this driver
+  * supports access to the full architected range, 256 pages.
+  *
++ * The CMIS (Common Management Interface Specification) defines use of
++ * considerably more pages (at least to page 0xAF), which this driver
++ * supports.
++ *
++ * NOTE: This version of the driver ONLY SUPPORTS BANK 0 PAGES on CMIS
++ * devices.
++ *
+  **/
+
+ /* #define DEBUG 1 */
+@@ -163,7 +170,8 @@ struct optoe_platform_data {
+ /* a few constants to find our way around the EEPROM */
+ #define OPTOE_PAGE_SELECT_REG   0x7F
+ #define ONE_ADDR_PAGEABLE_REG 0x02
+-#define ONE_ADDR_NOT_PAGEABLE (1<<2)
++#define QSFP_NOT_PAGEABLE (1<<2)
++#define CMIS_NOT_PAGEABLE (1<<7)
+ #define TWO_ADDR_PAGEABLE_REG 0x40
+ #define TWO_ADDR_PAGEABLE (1<<4)
+ #define TWO_ADDR_0X51_REG 92
+@@ -225,10 +233,12 @@ static unsigned int write_timeout = 25;
+  */
+ #define ONE_ADDR 1
+ #define TWO_ADDR 2
++#define CMIS_ADDR 3
+
+ static const struct i2c_device_id optoe_ids[] = {
+ 	{ "optoe1", ONE_ADDR },
+ 	{ "optoe2", TWO_ADDR },
++	{ "optoe3", CMIS_ADDR },
+ 	{ "sff8436", ONE_ADDR },
+ 	{ "24c04", TWO_ADDR },
+ 	{ /* END OF LIST */ }
+@@ -575,6 +585,7 @@ static ssize_t optoe_page_legal(struct optoe_data *optoe,
+ {
+ 	struct i2c_client *client = optoe->client[0];
+ 	u8 regval;
++	int not_pageable;
+ 	int status;
+ 	size_t maxlen;
+
+@@ -622,7 +633,7 @@ static ssize_t optoe_page_legal(struct optoe_data *optoe,
+ 			"page_legal, SFP, off %lld len %ld\n",
+ 			off, (long int) len);
+ 	} else {
+-		/* QSFP case */
++		/* QSFP case, CMIS case */
+ 		/* if no pages needed, we're good */
+ 		if ((off + len) <= ONE_ADDR_EEPROM_UNPAGED_SIZE)
+ 			return len;
+@@ -634,7 +645,17 @@ static ssize_t optoe_page_legal(struct optoe_data *optoe,
+ 				ONE_ADDR_PAGEABLE_REG, 1);
+ 		if (status < 0)
+ 			return status;  /* error out (no module?) */
+-		if (regval & ONE_ADDR_NOT_PAGEABLE) {
++
++		if (optoe->dev_class == ONE_ADDR) {
++			not_pageable = QSFP_NOT_PAGEABLE;
++		} else {
++			not_pageable = CMIS_NOT_PAGEABLE;
++		}
++		dev_dbg(&client->dev,
++			"Paging Register: 0x%x; not_pageable mask: 0x%x\n",
++			regval, not_pageable);
++
++		if (regval & not_pageable) {
+ 			/* pages not supported, trim len to unpaged size */
+ 			if (off >= ONE_ADDR_EEPROM_UNPAGED_SIZE)
+ 				return OPTOE_EOF;
+@@ -826,13 +847,37 @@ static ssize_t set_dev_class(struct device *dev,
+ 	/*
+ 	 * dev_class is actually the number of i2c addresses used, thus
+ 	 * legal values are "1" (QSFP class) and "2" (SFP class)
++	 * And...  CMIS spec is 1 i2c address, but puts the pageable
++	 * bit in a different location, so CMIS devices are "3"
+ 	 */
+
+ 	if (kstrtoint(buf, 0, &dev_class) != 0 ||
+-		dev_class < 1 || dev_class > 2)
++		dev_class < 1 || dev_class > 3)
+ 		return -EINVAL;
+
+ 	mutex_lock(&optoe->lock);
++	if (dev_class == TWO_ADDR) {
++		/* SFP family */
++		/* if it doesn't exist, create 0x51 i2c address */
++		if (!optoe->client[1]) {
++			optoe->client[1] = i2c_new_dummy(client->adapter, 0x51);
++			if (!optoe->client[1]) {
++				dev_err(&client->dev,
++					"address 0x51 unavailable\n");
++				mutex_unlock(&optoe->lock);
++				return -EADDRINUSE;
++			}
++		}
++		optoe->bin.size = TWO_ADDR_EEPROM_SIZE;
++		optoe->num_addresses = 2;
++	} else {
++		/* one-address (eg QSFP) and CMIS family */
++		/* if it exists, remove 0x51 i2c address */
++		if (optoe->client[1])
++			i2c_unregister_device(optoe->client[1]);
++		optoe->bin.size = ONE_ADDR_EEPROM_SIZE;
++		optoe->num_addresses = 1;
++	}
+ 	optoe->dev_class = dev_class;
+ 	mutex_unlock(&optoe->lock);
+
+@@ -983,7 +1028,13 @@ static int optoe_probe(struct i2c_client *client,
+ 		/* SFP family */
+ 		optoe->dev_class = TWO_ADDR;
+ 		chip.byte_len = TWO_ADDR_EEPROM_SIZE;
+-	} else {     /* those were the only two choices */
++		num_addresses = 2;
++	} else if (strcmp(client->name, "optoe3") == 0) {
++		/* CMIS spec */
++		optoe->dev_class = CMIS_ADDR;
++		chip.byte_len = ONE_ADDR_EEPROM_SIZE;
++		num_addresses = 1;
++	} else {     /* those were the only choices */
+ 		err = -EINVAL;
+ 		goto exit;
+ 	}
+-- 
+2.16.2
+

patch/series

@@ -35,6 +35,7 @@ driver-support-tun-config-carrier-enable.patch
 driver-support-optoe.patch
 driver-support-optoe-EOF_fix.patch
 driver-support-optoe-chunk-offset-fix.patch
+driver-support-optoe-QSFP_DD.patch
 bridge-add-per-port-broadcast-flood-flag.patch
 driver-net-tg3-add-param-short-preamble-and-reset.patch
 config-dell-s6000.patch