workdir presence checks

A container's workdir can be specified via the CLI via `--workdir` and
via an image config with the CLI having precedence.

Since images have a tendency to specify workdirs without necessarily
shipping the paths with the root FS, make sure that Podman creates the
workdir.  When specified via the CLI, do not create the path, but check
for its existence and return a human-friendly error.

NOTE: `crun` is performing a similar check that would yield exit code
127.  With this change, however, Podman performs the check and yields
exit code 126.  Since this is specific to `crun`, I do not consider it
to be a breaking change of Podman.

Fixes: containers#9040
Signed-off-by: Valentin Rothberg <[email protected]>

libpod/container_internal_linux.go

@@ -174,25 +174,60 @@ func (c *Container) prepare() error {
 		return err
 	}
 
-	// Ensure container entrypoint is created (if required)
-	if c.config.CreateWorkingDir {
-		workdir, err := securejoin.SecureJoin(c.state.Mountpoint, c.WorkingDir())
-		if err != nil {
-			return errors.Wrapf(err, "error creating path to container %s working dir", c.ID())
-		}
-		rootUID := c.RootUID()
-		rootGID := c.RootGID()
+	// Make sure the workdir exists
+	if err := c.resolveWorkDir(); err != nil {
+		return err
+	}
 
-		if err := os.MkdirAll(workdir, 0755); err != nil {
-			if os.IsExist(err) {
-				return nil
+	return nil
+}
+
+// resolveWorkDir resolves the container's workdir and, depending on the
+// configuration, will create it, or error out if it does not exist.
+// Note that the container must be mounted before.
+func (c *Container) resolveWorkDir() error {
+	workdir := c.WorkingDir()
+
+	// If the specified workdir is a subdir of a volume or mount,
+	// we don't need to do anything.  The runtime is taking care of
+	// that.
+	if isPathOnVolume(c, workdir) || isPathOnBindMount(c, workdir) {
+		logrus.Debugf("Workdir %q resolved to a volume or mount", workdir)
+		return nil
+	}
+
+	_, resolvedWorkdir, err := c.resolvePath(c.state.Mountpoint, workdir)
+	if err != nil {
+		return err
+	}
+	logrus.Debugf("Workdir %q resolved to host path %q", workdir, resolvedWorkdir)
+
+	// No need to create it (e.g., `--workdir=/foo`), so let's make sure
+	// the path exists on the container.
+	if !c.config.CreateWorkingDir {
+		if _, err := os.Stat(resolvedWorkdir); err != nil {
+			if os.IsNotExist(err) {
+				return errors.Errorf("workdir %q does not exist on container %s", workdir, c.ID())
 			}
-			return errors.Wrapf(err, "error creating container %s working dir", c.ID())
+			// This might be a serious error (e.g., permission), so
+			// we need to return the full error.
+			return errors.Wrapf(err, "error detecting workdir %q on container %s", workdir, c.ID())
 		}
+	}
+
+	// Ensure container entrypoint is created (if required).
+	rootUID := c.RootUID()
+	rootGID := c.RootGID()
 
-		if err := os.Chown(workdir, rootUID, rootGID); err != nil {
-			return errors.Wrapf(err, "error chowning container %s working directory to container root", c.ID())
+	if err := os.MkdirAll(resolvedWorkdir, 0755); err != nil {
+		if os.IsExist(err) {
+			return nil
 		}
+		return errors.Wrapf(err, "error creating container %s workdir", c.ID())
+	}
+
+	if err := os.Chown(resolvedWorkdir, rootUID, rootGID); err != nil {
+		return errors.Wrapf(err, "error chowning container %s workdir to container root", c.ID())
 	}
 
 	return nil

libpod/container_path_resolution.go

@@ -13,6 +13,11 @@ import (
 // resolveContainerPaths resolves the container's mount point and the container
 // path as specified by the user.  Both may resolve to paths outside of the
 // container's mount point when the container path hits a volume or bind mount.
+//
+// It returns a bool, indicating whether containerPath resolves outside of
+// mountPoint (e.g., via a mount or volume), the resolved root (e.g., container
+// mount, bind mount or volume) and the resolved path on the root (absolute to
+// the host).
 func (container *Container) resolvePath(mountPoint string, containerPath string) (string, string, error) {
 	// Let's first make sure we have a path relative to the mount point.
 	pathRelativeToContainerMountPoint := containerPath
@@ -97,8 +102,8 @@ func (container *Container) resolvePath(mountPoint string, containerPath string)
 	return mountPoint, resolvedPathOnTheContainerMountPoint, nil
 }
 
-// findVolume checks if the specified container path matches a volume inside
-// the container.  It returns a matching volume or nil.
+// findVolume checks if the specified containerPath matches the destination
+// path of a Volume.  Returns a matching Volume or nil.
 func findVolume(c *Container, containerPath string) (*Volume, error) {
 	runtime := c.Runtime()
 	cleanedContainerPath := filepath.Clean(containerPath)
@@ -110,8 +115,25 @@ func findVolume(c *Container, containerPath string) (*Volume, error) {
 	return nil, nil
 }
 
-// findBindMount checks if the specified container path matches a bind mount
-// inside the container.  It returns a matching mount or nil.
+// isPathOnVolume returns true if the specified containerPath is a subdir of any
+// Volume's destination.
+func isPathOnVolume(c *Container, containerPath string) bool {
+	cleanedContainerPath := filepath.Clean(containerPath)
+	for _, vol := range c.Config().NamedVolumes {
+		if cleanedContainerPath == filepath.Clean(vol.Dest) {
+			return true
+		}
+		for dest := vol.Dest; dest != "/"; dest = filepath.Dir(dest) {
+			if cleanedContainerPath == dest {
+				return true
+			}
+		}
+	}
+	return false
+}
+
+// findBindMounts checks if the specified containerPath matches the destination
+// path of a Mount.  Returns a matching Mount or nil.
 func findBindMount(c *Container, containerPath string) *specs.Mount {
 	cleanedPath := filepath.Clean(containerPath)
 	for _, m := range c.Config().Spec.Mounts {
@@ -125,3 +147,20 @@ func findBindMount(c *Container, containerPath string) *specs.Mount {
 	}
 	return nil
 }
+
+/// isPathOnBindMount returns true if the specified containerPath is a subdir of any
+// Mount's destination.
+func isPathOnBindMount(c *Container, containerPath string) bool {
+	cleanedContainerPath := filepath.Clean(containerPath)
+	for _, m := range c.Config().Spec.Mounts {
+		if cleanedContainerPath == filepath.Clean(m.Destination) {
+			return true
+		}
+		for dest := m.Destination; dest != "/"; dest = filepath.Dir(dest) {
+			if cleanedContainerPath == dest {
+				return true
+			}
+		}
+	}
+	return false
+}

pkg/specgen/generate/container.go

@@ -203,20 +203,6 @@ func CompleteSpec(ctx context.Context, r *libpod.Runtime, s *specgen.SpecGenerat
 	}
 	s.Annotations = annotations
 
-	// workdir
-	if s.WorkDir == "" {
-		if newImage != nil {
-			workingDir, err := newImage.WorkingDir(ctx)
-			if err != nil {
-				return nil, err
-			}
-			s.WorkDir = workingDir
-		}
-	}
-	if s.WorkDir == "" {
-		s.WorkDir = "/"
-	}
-
 	if len(s.SeccompProfilePath) < 1 {
 		p, err := libpod.DefaultSeccompPath()
 		if err != nil {

pkg/specgen/generate/container_create.go

@@ -272,10 +272,18 @@ func createContainerOptions(ctx context.Context, rt *libpod.Runtime, s *specgen.
 	if s.Entrypoint != nil {
 		options = append(options, libpod.WithEntrypoint(s.Entrypoint))
 	}
-	// If the user did not set an workdir but the image did, ensure it is
-	// created.
+	// If the user did not specify a workdir on the CLI, let's extract it
+	// from the image.
 	if s.WorkDir == "" && img != nil {
 		options = append(options, libpod.WithCreateWorkingDir())
+		wd, err := img.WorkingDir(ctx)
+		if err != nil {
+			return nil, err
+		}
+		s.WorkDir = wd
+	}
+	if s.WorkDir == "" {
+		s.WorkDir = "/"
 	}
 	if s.StopSignal != nil {
 		options = append(options, libpod.WithStopSignal(*s.StopSignal))

test/e2e/run_working_dir_test.go

@@ -2,7 +2,6 @@ package integration
 
 import (
 	"os"
-	"strings"
 
 	. "github.com/containers/podman/v2/test/utils"
 	. "github.com/onsi/ginkgo"
@@ -41,12 +40,9 @@ var _ = Describe("Podman run", func() {
 	})
 
 	It("podman run a container using non existing --workdir", func() {
-		if !strings.Contains(podmanTest.OCIRuntime, "crun") {
-			Skip("Test only works on crun")
-		}
 		session := podmanTest.Podman([]string{"run", "--workdir", "/home/foobar", ALPINE, "pwd"})
 		session.WaitWithDefaultTimeout()
-		Expect(session.ExitCode()).To(Equal(127))
+		Expect(session.ExitCode()).To(Equal(126))
 	})
 
 	It("podman run a container on an image with a workdir", func() {

test/system/030-run.bats

@@ -589,4 +589,25 @@ json-file | f
     is "${lines[1]}" "$rand" "Container runs successfully despite warning"
 }
 
+@test "podman run - check workdir" {
+    # Workdirs specified via the CLI are not created on the root FS.
+    run_podman 126 run --rm --workdir /i/do/not/exist $IMAGE pwd
+    # Note: remote error prepends an attach error.
+    is "$output" "Error: .*workdir \"/i/do/not/exist\" does not exist on container.*"
+
+    testdir=$PODMAN_TMPDIR/volume
+    mkdir -p $testdir
+    randomcontent=$(random_string 10)
+    echo "$randomcontent" > $testdir/content
+
+    # Workdir does not exist on the image but is volume mounted.
+    run_podman run --rm --workdir /IamNotOnTheImage -v $testdir:/IamNotOnTheImage $IMAGE cat content
+    is "$output" "$randomcontent" "cat random content"
+
+    # Workdir does not exist on the image but is created by the runtime as it's
+    # a subdir of a volume.
+    run_podman run --rm --workdir /IamNotOntheImage -v $testdir/content:/IamNotOntheImage/foo $IMAGE cat foo
+    is "$output" "$randomcontent" "cat random content"
+}
+
 # vim: filetype=sh

test/system/070-build.bats

@@ -163,10 +163,12 @@ EOF
 https_proxy=https-proxy-in-env-file
 EOF
 
+    # NOTE: it's important to not create the workdir.
+    # Podman will make sure to create a missing workdir
+    # if needed. See #9040.
     cat >$tmpdir/Containerfile <<EOF
 FROM $IMAGE
 LABEL $label_name=$label_value
-RUN mkdir $workdir
 WORKDIR $workdir
 
 # Test for #7094 - chowning of invalid symlinks