usb: dwc2: fix STM ID/VBUS detection startup delay in dwc2_driver_probe

When activate_stm_id_vb_detection is enabled, ID and Vbus detection relies
on sensing comparators. This detection needs time to stabilize.
A delay was already applied in dwc2_resume() when reactivating the
detection, but it wasn't done in dwc2_probe().
This patch adds delay after enabling STM ID/VBUS detection. Then, ID state
is good when initializing gadget and host, and avoid to get a wrong
Connector ID Status Change interrupt.

Fixes: a415083 ("usb: dwc2: add support for STM32MP15 SoCs USB OTG HS and FS")
Cc: stable <[email protected]>
Acked-by: Minas Harutyunyan <[email protected]>
Signed-off-by: Amelie Delaunay <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

drivers/usb/dwc2/platform.c

@@ -575,6 +575,9 @@ static int dwc2_driver_probe(struct platform_device *dev)
 		ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
 		ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
 		dwc2_writel(hsotg, ggpio, GGPIO);
+
+		/* ID/VBUS detection startup time */
+		usleep_range(5000, 7000);
 	}
 
 	retval = dwc2_drd_init(hsotg);