Create README.md #799

kilianfriedrich · 2020-02-14T18:22:21Z

to replace existing README (which isn't displayed like intended)

Fix checkpatch errors: ERROR: else should follow close brace '}' torvalds#121: FILE: drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c:121: + } + else WARNING: line over 80 characters torvalds#150: FILE: drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c:150: + pinfo->tx_fifosize), (void __force *)pinfo->mem_addr, WARNING: Block comments should align the * on each line torvalds#66: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:66: + * Check, if transmit buffers are processed +*/ WARNING: braces {} are not necessary for any arm of this statement torvalds#170: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:170: + if (IS_SMC(pinfo)) { [...] + } else { [...] WARNING: labels should not be indented torvalds#292: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:292: + error_return: ERROR: code indent should use tabs where possible torvalds#299: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:299: +^I^I BD_SC_OV | BD_SC_ID);$ WARNING: labels should not be indented torvalds#319: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:319: + handle_error: WARNING: line over 80 characters torvalds#423: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:423: + setbits32(&pinfo->sccp->scc_gsmrl, (SCC_GSMRL_ENR | SCC_GSMRL_ENT)); ERROR: space required before the open parenthesis '(' torvalds#451: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:451: + while(!cpm_uart_tx_empty(port)) { WARNING: Missing a blank line after declarations torvalds#462: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:462: + smc_t __iomem *smcp = pinfo->smcp; + clrbits16(&smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN); WARNING: line over 80 characters torvalds#466: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:466: + clrbits32(&sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); WARNING: Missing a blank line after declarations torvalds#466: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:466: + scc_t __iomem *sccp = pinfo->sccp; + clrbits32(&sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); ERROR: code indent should use tabs where possible torvalds#484: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:484: + struct ktermios *termios,$ WARNING: please, no spaces at the start of a line torvalds#484: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:484: + struct ktermios *termios,$ ERROR: code indent should use tabs where possible torvalds#485: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:485: + struct ktermios *old)$ WARNING: please, no spaces at the start of a line torvalds#485: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:485: + struct ktermios *old)$ WARNING: line over 80 characters torvalds#624: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:624: + /* Output in *one* operation, so we don't interrupt RX/TX if they WARNING: Block comments use a trailing */ on a separate line torvalds#625: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:625: + * were already enabled. */ WARNING: line over 80 characters torvalds#629: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:629: + out_be16(&pinfo->sccup->scc_genscc.scc_mrblr, pinfo->rx_fifosize); WARNING: line over 80 characters torvalds#773: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:773: + mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize); ERROR: code indent should use tabs where possible torvalds#797: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:797: +^I (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE);$ ERROR: code indent should use tabs where possible torvalds#799: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:799: +^I (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE);$ ERROR: code indent should use tabs where possible torvalds#836: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:836: +^I SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);$ ERROR: code indent should use tabs where possible torvalds#859: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:859: +^I (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE);$ ERROR: code indent should use tabs where possible torvalds#861: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:861: +^I (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE);$ WARNING: space prohibited between function name and open parenthesis '(' torvalds#866: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:866: +#if defined (CONFIG_I2C_SPI_SMC1_UCODE_PATCH) WARNING: line over 80 characters torvalds#921: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:921: + clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); WARNING: Missing a blank line after declarations torvalds#462: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:462: + smc_t __iomem *smcp = pinfo->smcp; + clrbits16(&smcp->smc_smcmr, WARNING: Missing a blank line after declarations torvalds#467: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:467: + scc_t __iomem *sccp = pinfo->sccp; + clrbits32(&sccp->scc_gsmrl, ERROR: code indent should use tabs where possible #1151: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1151: + struct uart_cpm_port *pinfo)$ WARNING: please, no spaces at the start of a line #1151: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1151: + struct uart_cpm_port *pinfo)$ ERROR: "(foo*)" should be "(foo *)" #1161: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1161: + struct clk *clk = clk_get(NULL, (const char*)data); WARNING: Missing a blank line after declarations #1162: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1162: + struct clk *clk = clk_get(NULL, (const char*)data); + if (!IS_ERR(clk)) ERROR: code indent should use tabs where possible #1169: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1169: +^I^I^I "fsl,cpm-brg property.\n", np);$ ERROR: code indent should use tabs where possible #1178: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1178: +^I^I "fsl,cpm-command property.\n", np);$ ERROR: code indent should use tabs where possible #1192: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1192: WARNING: braces {} are not necessary for any arm of this statement #1279: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1279: + if (unlikely(nolock)) { [...] + } else { [...] WARNING: braces {} are not necessary for any arm of this statement #1287: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1287: + if (unlikely(nolock)) { [...] + } else { [...] WARNING: line over 80 characters #1354: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1354: + clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT); ERROR: Macros with complex values should be enclosed in parentheses #1394: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1394: +#define CPM_UART_CONSOLE &cpm_scc_uart_console WARNING: Missing a blank line after declarations #1437: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1437: + struct uart_cpm_port *pinfo = platform_get_drvdata(ofdev); + return uart_remove_one_port(&cpm_reg, &pinfo->port); WARNING: please, no spaces at the start of a line #1464: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1464: + };$ WARNING: Missing a blank line after declarations #1469: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1469: + int ret = uart_register_driver(&cpm_reg); + if (ret) WARNING: Missing a blank line after declarations torvalds#1062: FILE: drivers/tty/serial/cpm_uart/cpm_uart_core.c:1062: + int i; + volatile cbd_t *bdp; ERROR: "foo * bar" should be "foo *bar" torvalds#19: FILE: drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h:19: +static inline void cpm_set_scc_fcr(scc_uart_t __iomem * sup) ERROR: "foo * bar" should be "foo *bar" torvalds#25: FILE: drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h:25: +static inline void cpm_set_smc_fcr(smc_uart_t __iomem * up) WARNING: Improper SPDX comment style for 'drivers/tty/serial/cpm_uart/cpm_uart.h', please use '/*' instead #1: FILE: drivers/tty/serial/cpm_uart/cpm_uart.h:1: +// SPDX-License-Identifier: GPL-2.0 WARNING: Missing or malformed SPDX-License-Identifier tag in line 1 #1: FILE: drivers/tty/serial/cpm_uart/cpm_uart.h:1: +// SPDX-License-Identifier: GPL-2.0 WARNING: Block comments use * on subsequent lines torvalds#106: FILE: drivers/tty/serial/cpm_uart/cpm_uart.h:106: +/* + virtual to phys transtalion ERROR: code indent should use tabs where possible torvalds#109: FILE: drivers/tty/serial/cpm_uart/cpm_uart.h:109: + struct uart_cpm_port *pinfo)$ WARNING: please, no spaces at the start of a line torvalds#109: FILE: drivers/tty/serial/cpm_uart/cpm_uart.h:109: + struct uart_cpm_port *pinfo)$ ERROR: code indent should use tabs where possible torvalds#125: FILE: drivers/tty/serial/cpm_uart/cpm_uart.h:125: + struct uart_cpm_port *pinfo)$ WARNING: please, no spaces at the start of a line torvalds#125: FILE: drivers/tty/serial/cpm_uart/cpm_uart.h:125: + struct uart_cpm_port *pinfo)$ Signed-off-by: Enrico Weigelt <[email protected]>

Resolve nx_huge_pages to true/false when kvm.ko is loaded, leaving it as -1 is technically undefined behavior when its value is read out by param_get_bool(), as booleans are supported to be '0' or '1'. Alternatively, KVM could define a custom getter for the param, but the auto value doesn't depend on the vendor module in any way, and printing "auto" would be unnecessarily unfriendly to the user. In addition to fixing the undefined behavior, resolving the auto value also fixes the scenario where the auto value resolves to N and no vendor module is loaded. Previously, -1 would result in Y being printed even though KVM would ultimately disable the mitigation. Rename the exisining MMU module init/exit helpers to clarify that they're invoked with respect to the vendor module, and add comments to document why KVM has two separate flows. ========================================================================= UBSAN: invalid-load in kernel/params.c:320:33 load of value 255 is not a valid value for type '_Bool' CPU: 6 PID: 892 Comm: tail Not tainted 5.17.0-rc3+ torvalds#799 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 ubsan_epilogue+0x5/0x40 __ubsan_handle_load_invalid_value.cold+0x43/0x48 param_get_bool.cold+0xf/0x14 param_attr_show+0x55/0x80 module_attr_show+0x1c/0x30 sysfs_kf_seq_show+0x93/0xc0 seq_read_iter+0x11c/0x450 new_sync_read+0x11b/0x1a0 vfs_read+0xf0/0x190 ksys_read+0x5f/0xe0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> ========================================================================= Fixes: b8e8c83 ("kvm: mmu: ITLB_MULTIHIT mitigation") Cc: [email protected] Reported-by: Bruno Goncalves <[email protected]> Reported-by: Jan Stancek <[email protected]> Signed-off-by: Sean Christopherson <[email protected]>

Resolve nx_huge_pages to true/false when kvm.ko is loaded, leaving it as -1 is technically undefined behavior when its value is read out by param_get_bool(), as boolean values are supposed to be '0' or '1'. Alternatively, KVM could define a custom getter for the param, but the auto value doesn't depend on the vendor module in any way, and printing "auto" would be unnecessarily unfriendly to the user. In addition to fixing the undefined behavior, resolving the auto value also fixes the scenario where the auto value resolves to N and no vendor module is loaded. Previously, -1 would result in Y being printed even though KVM would ultimately disable the mitigation. Rename the existing MMU module init/exit helpers to clarify that they're invoked with respect to the vendor module, and add comments to document why KVM has two separate "module init" flows. ========================================================================= UBSAN: invalid-load in kernel/params.c:320:33 load of value 255 is not a valid value for type '_Bool' CPU: 6 PID: 892 Comm: tail Not tainted 5.17.0-rc3+ torvalds#799 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 ubsan_epilogue+0x5/0x40 __ubsan_handle_load_invalid_value.cold+0x43/0x48 param_get_bool.cold+0xf/0x14 param_attr_show+0x55/0x80 module_attr_show+0x1c/0x30 sysfs_kf_seq_show+0x93/0xc0 seq_read_iter+0x11c/0x450 new_sync_read+0x11b/0x1a0 vfs_read+0xf0/0x190 ksys_read+0x5f/0xe0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> ========================================================================= Fixes: b8e8c83 ("kvm: mmu: ITLB_MULTIHIT mitigation") Cc: [email protected] Reported-by: Bruno Goncalves <[email protected]> Reported-by: Jan Stancek <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>

commit 1d0e848 upstream. Resolve nx_huge_pages to true/false when kvm.ko is loaded, leaving it as -1 is technically undefined behavior when its value is read out by param_get_bool(), as boolean values are supposed to be '0' or '1'. Alternatively, KVM could define a custom getter for the param, but the auto value doesn't depend on the vendor module in any way, and printing "auto" would be unnecessarily unfriendly to the user. In addition to fixing the undefined behavior, resolving the auto value also fixes the scenario where the auto value resolves to N and no vendor module is loaded. Previously, -1 would result in Y being printed even though KVM would ultimately disable the mitigation. Rename the existing MMU module init/exit helpers to clarify that they're invoked with respect to the vendor module, and add comments to document why KVM has two separate "module init" flows. ========================================================================= UBSAN: invalid-load in kernel/params.c:320:33 load of value 255 is not a valid value for type '_Bool' CPU: 6 PID: 892 Comm: tail Not tainted 5.17.0-rc3+ torvalds#799 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 ubsan_epilogue+0x5/0x40 __ubsan_handle_load_invalid_value.cold+0x43/0x48 param_get_bool.cold+0xf/0x14 param_attr_show+0x55/0x80 module_attr_show+0x1c/0x30 sysfs_kf_seq_show+0x93/0xc0 seq_read_iter+0x11c/0x450 new_sync_read+0x11b/0x1a0 vfs_read+0xf0/0x190 ksys_read+0x5f/0xe0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> ========================================================================= Fixes: b8e8c83 ("kvm: mmu: ITLB_MULTIHIT mitigation") Cc: [email protected] Reported-by: Bruno Goncalves <[email protected]> Reported-by: Jan Stancek <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Rust 1.62.0

Create README.md

d5cb882

to replace existing README (which isn't displayed like intended)

kilianfriedrich closed this Feb 14, 2020

yestyle pushed a commit to yestyle/linux that referenced this pull request Jul 1, 2022

Merge pull request torvalds#799 from ojeda/rust-1.62.0

4297971

Rust 1.62.0

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Create README.md #799

Create README.md #799

kilianfriedrich commented Feb 14, 2020

Create README.md #799

Create README.md #799

Conversation

kilianfriedrich commented Feb 14, 2020