Moving index in a more precise scope. #155
Open
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
|
Pull requests are not accepted on GitHub for Linux. On Fri, Jan 16, 2015, 6:38 PM Triton64 [email protected] wrote:
|
|
You do realize that C doesn't allow type declarations inside a for loop except in C99...right? If you tried to compile the kernel with these changes you should have noticed the big, huge, unavoidable compilation error that would appear. Plus Linus doesn't accept PRs on GitHub... |
|
Where's the type declaration inside a loop?? Not seeing it. and, yes, Linus really, really, doesn't accept pull requests on GitHub |
0day-ci
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Jun 16, 2016
WARNING: Prefer 'unsigned int' to bare use of 'unsigned' torvalds#155: FILE: mm/readahead.c:111: + struct list_head *pages, unsigned nr_pages, gfp_t gfp_mask) WARNING: line over 80 characters torvalds#165: FILE: mm/readahead.c:129: + if (!add_to_page_cache_lru(page, mapping, page->index, gfp_mask)) { WARNING: braces {} are not necessary for single statement blocks torvalds#165: FILE: mm/readahead.c:129: + if (!add_to_page_cache_lru(page, mapping, page->index, gfp_mask)) { mapping->a_ops->readpage(filp, page); } total: 0 errors, 3 warnings, 111 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/mm-memcg-use-consistent-gfp-flags-during-readahead.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Michal Hocko <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
0day-ci
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Jun 21, 2016
WARNING: Prefer 'unsigned int' to bare use of 'unsigned' torvalds#155: FILE: mm/readahead.c:111: + struct list_head *pages, unsigned nr_pages, gfp_t gfp_mask) WARNING: line over 80 characters torvalds#165: FILE: mm/readahead.c:129: + if (!add_to_page_cache_lru(page, mapping, page->index, gfp_mask)) { WARNING: braces {} are not necessary for single statement blocks torvalds#165: FILE: mm/readahead.c:129: + if (!add_to_page_cache_lru(page, mapping, page->index, gfp_mask)) { mapping->a_ops->readpage(filp, page); } total: 0 errors, 3 warnings, 111 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/mm-memcg-use-consistent-gfp-flags-during-readahead.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Michal Hocko <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
0day-ci
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Jun 23, 2016
WARNING: Prefer 'unsigned int' to bare use of 'unsigned' torvalds#155: FILE: mm/readahead.c:111: + struct list_head *pages, unsigned nr_pages, gfp_t gfp_mask) WARNING: line over 80 characters torvalds#165: FILE: mm/readahead.c:129: + if (!add_to_page_cache_lru(page, mapping, page->index, gfp_mask)) { WARNING: braces {} are not necessary for single statement blocks torvalds#165: FILE: mm/readahead.c:129: + if (!add_to_page_cache_lru(page, mapping, page->index, gfp_mask)) { mapping->a_ops->readpage(filp, page); } total: 0 errors, 3 warnings, 111 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/mm-memcg-use-consistent-gfp-flags-during-readahead.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Michal Hocko <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
0day-ci
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Jul 9, 2016
Changes in v3 since v2: - Kconfig: select VIDEOBUF2_DMA_CONTIG, not SG - drop i2c code as unused - Dropped num_buffers check in queue_setup as suggested by Hans - Drop std autodetect on streaming start as suggested by Hans - Cleanup buf queue on enable_input() failure - Change container_of() to list_entry() where applicable - Changed V4L2_FIELD_NONE to V4L2_FIELD_INTERLACED as suggested - frameinterval rework suggested by Hans - Add enum_framesizes - Report framesize based on std, not input w/h - Add printed warning about known video quality issues - MAINTAINERS: fix path - request_mem_region() -> pci_request_regions() - Rebase onto Hans' "for-v4.8i" branch - Follow changes from patchset "vb2: replace allocation context by device pointer" Below log is produced by today's v4l2-compliance from v4l-utils git, and this patch based on branch "for-v4.8i" of git://linuxtv.org/hverkuil/media_tree.git . Compliance test runs fine. checkpatch.pl is happy with this patch except for artifacts_warning which produces a bunch of such warnings: WARNING: quoted string split across lines torvalds#155: FILE: drivers/media/pci/tw5864/tw5864-core.c:44: +"This driver was developed by Bluecherry LLC by deducing behaviour of original" +" manufacturer's driver, from both source code and execution traces.\n" I believe I'd better not join all the lines to avoid them looking like "Paragraph one.\Paragraph two.\Paragraph three.\n" # v4l2-compliance -d 6 -s v4l2-compliance SHA : 5e74f6a15aa14c01d8319e086d98f33d96a6a04d Driver Info: Driver name : tw5864 Card type : TW5864 Encoder 2 Bus info : PCI:0000:06:05.0 Driver version: 4.7.0 Capabilities : 0x85200001 Video Capture Read/Write Streaming Extended Pix Format Device Capabilities Device Caps : 0x05200001 Video Capture Read/Write Streaming Extended Pix Format Compliance test for device /dev/video6 (not using libv4l2): Required ioctls: test VIDIOC_QUERYCAP: OK Allow for multiple opens: test second video open: OK test VIDIOC_QUERYCAP: OK test VIDIOC_G/S_PRIORITY: OK Debug ioctls: test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) test VIDIOC_LOG_STATUS: OK Input ioctls: test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) test VIDIOC_ENUMAUDIO: OK (Not Supported) test VIDIOC_G/S/ENUMINPUT: OK test VIDIOC_G/S_AUDIO: OK (Not Supported) Inputs: 1 Audio Inputs: 0 Tuners: 0 Output ioctls: test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported) Outputs: 0 Audio Outputs: 0 Modulators: 0 Input/Output configuration ioctls: test VIDIOC_ENUM/G/S/QUERY_STD: OK test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) test VIDIOC_G/S_EDID: OK (Not Supported) Test input 0: Control ioctls: test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK test VIDIOC_QUERYCTRL: OK test VIDIOC_G/S_CTRL: OK test VIDIOC_G/S/TRY_EXT_CTRLS: OK test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 11 Private Controls: 0 Format ioctls: test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK test VIDIOC_G/S_PARM: OK test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK test VIDIOC_TRY_FMT: OK test VIDIOC_S_FMT: OK test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) test Cropping: OK (Not Supported) test Composing: OK (Not Supported) test Scaling: OK (Not Supported) Codec ioctls: test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) Buffer ioctls: test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK test VIDIOC_EXPBUF: OK Test input 0: Streaming ioctls: test read/write: OK test MMAP: OK test USERPTR: OK (Not Supported) test DMABUF: OK (Not Supported) Total: 46, Succeeded: 46, Failed: 0, Warnings: 0 ---8<--- Support for boards based on Techwell TW5864 chip which provides multichannel video & audio grabbing and encoding (H.264, MJPEG, ADPCM G.726). This submission implements only H.264 encoding of all channels at D1 resolution. Thanks to Mark Thompson <[email protected]> for help, and for contribution of H.264 startcode emulation prevention code. Signed-off-by: Andrey Utkin <[email protected]> Tested-by: Andrey Utkin <[email protected]>
0day-ci
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Jul 24, 2016
WARNING: Prefer 'unsigned int' to bare use of 'unsigned' torvalds#155: FILE: mm/readahead.c:111: + struct list_head *pages, unsigned nr_pages, gfp_t gfp_mask) WARNING: line over 80 characters torvalds#165: FILE: mm/readahead.c:129: + if (!add_to_page_cache_lru(page, mapping, page->index, gfp_mask)) { WARNING: braces {} are not necessary for single statement blocks torvalds#165: FILE: mm/readahead.c:129: + if (!add_to_page_cache_lru(page, mapping, page->index, gfp_mask)) { mapping->a_ops->readpage(filp, page); } total: 0 errors, 3 warnings, 111 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/mm-memcg-use-consistent-gfp-flags-during-readahead.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Michal Hocko <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Sep 25, 2017
With device public pages at the end of my memory space, I'm getting output from _vm_normal_page(): BUG: Bad page map in process migrate_pages pte:c0800001ffff0d06 pmd:f95d3000 addr:00007fff89330000 vm_flags:00100073 anon_vma:c0000000fa899320 mapping: (null) index:7fff8933 file: (null) fault: (null) mmap: (null) readpage: (null) CPU: 0 PID: 13963 Comm: migrate_pages Tainted: P B OE 4.14.0-rc1-wip torvalds#155 Call Trace: [c0000000f965f910] [c00000000094d55c] dump_stack+0xb0/0xf4 (unreliable) [c0000000f965f950] [c0000000002b269c] print_bad_pte+0x28c/0x340 [c0000000f965fa00] [c0000000002b59c0] _vm_normal_page+0xc0/0x140 [c0000000f965fa20] [c0000000002b6e64] zap_pte_range+0x664/0xc10 [c0000000f965fb00] [c0000000002b7858] unmap_page_range+0x318/0x670 [c0000000f965fbd0] [c0000000002b8074] unmap_vmas+0x74/0xe0 [c0000000f965fc20] [c0000000002c4a18] exit_mmap+0xe8/0x1f0 [c0000000f965fce0] [c0000000000ecbdc] mmput+0xac/0x1f0 [c0000000f965fd10] [c0000000000f62e8] do_exit+0x348/0xcd0 [c0000000f965fdd0] [c0000000000f6d2c] do_group_exit+0x5c/0xf0 [c0000000f965fe10] [c0000000000f6ddc] SyS_exit_group+0x1c/0x20 [c0000000f965fe30] [c00000000000b184] system_call+0x58/0x6c The pfn causing this is the very last one. Correct the bounds check accordingly. Fixes: df6ad69 ("mm/device-public-memory: device memory cache coherent with CPU") Cc: Jérôme Glisse <[email protected]> Signed-off-by: Reza Arbab <[email protected]>
torvalds
pushed a commit
that referenced
this pull request
Oct 4, 2017
With device public pages at the end of my memory space, I'm getting output from _vm_normal_page(): BUG: Bad page map in process migrate_pages pte:c0800001ffff0d06 pmd:f95d3000 addr:00007fff89330000 vm_flags:00100073 anon_vma:c0000000fa899320 mapping: (null) index:7fff8933 file: (null) fault: (null) mmap: (null) readpage: (null) CPU: 0 PID: 13963 Comm: migrate_pages Tainted: P B OE 4.14.0-rc1-wip #155 Call Trace: dump_stack+0xb0/0xf4 (unreliable) print_bad_pte+0x28c/0x340 _vm_normal_page+0xc0/0x140 zap_pte_range+0x664/0xc10 unmap_page_range+0x318/0x670 unmap_vmas+0x74/0xe0 exit_mmap+0xe8/0x1f0 mmput+0xac/0x1f0 do_exit+0x348/0xcd0 do_group_exit+0x5c/0xf0 SyS_exit_group+0x1c/0x20 system_call+0x58/0x6c The pfn causing this is the very last one. Correct the bounds check accordingly. Fixes: df6ad69 ("mm/device-public-memory: device memory cache coherent with CPU") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Reza Arbab <[email protected]> Reviewed-by: Jérôme Glisse <[email protected]> Reviewed-by: Balbir Singh <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Oct 10, 2017
With device public pages at the end of my memory space, I'm getting output from _vm_normal_page(): BUG: Bad page map in process migrate_pages pte:c0800001ffff0d06 pmd:f95d3000 addr:00007fff89330000 vm_flags:00100073 anon_vma:c0000000fa899320 mapping: (null) index:7fff8933 file: (null) fault: (null) mmap: (null) readpage: (null) CPU: 0 PID: 13963 Comm: migrate_pages Tainted: P B OE 4.14.0-rc1-wip torvalds#155 Call Trace: [c0000000f965f910] [c00000000094d55c] dump_stack+0xb0/0xf4 (unreliable) [c0000000f965f950] [c0000000002b269c] print_bad_pte+0x28c/0x340 [c0000000f965fa00] [c0000000002b59c0] _vm_normal_page+0xc0/0x140 [c0000000f965fa20] [c0000000002b6e64] zap_pte_range+0x664/0xc10 [c0000000f965fb00] [c0000000002b7858] unmap_page_range+0x318/0x670 [c0000000f965fbd0] [c0000000002b8074] unmap_vmas+0x74/0xe0 [c0000000f965fc20] [c0000000002c4a18] exit_mmap+0xe8/0x1f0 [c0000000f965fce0] [c0000000000ecbdc] mmput+0xac/0x1f0 [c0000000f965fd10] [c0000000000f62e8] do_exit+0x348/0xcd0 [c0000000f965fdd0] [c0000000000f6d2c] do_group_exit+0x5c/0xf0 [c0000000f965fe10] [c0000000000f6ddc] SyS_exit_group+0x1c/0x20 [c0000000f965fe30] [c00000000000b184] system_call+0x58/0x6c The pfn causing this is the very last one. Correct the bounds check accordingly. Fixes: df6ad69 ("mm/device-public-memory: device memory cache coherent with CPU") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Reza Arbab <[email protected]> Reviewed-by: Jérôme Glisse <[email protected]> Reviewed-by: Balbir Singh <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
alistair23
pushed a commit
to alistair23/linux
that referenced
this pull request
Jan 31, 2021
Update 5.4-2.2.x-imx to v5.4.72 from stable + merge commits from imx_5.4.47_2.2.0
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Aug 8, 2021
… event name The following commands: # echo 'read_max u64 size;' > synthetic_events # echo 'hist:keys=common_pid:count=count:onmax($count).trace(read_max,count)' > events/syscalls/sys_enter_read/trigger Causes: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 4 PID: 1763 Comm: bash Not tainted 5.14.0-rc2-test+ torvalds#155 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:strcmp+0xc/0x20 Code: 75 f7 31 c0 0f b6 0c 06 88 0c 02 48 83 c0 01 84 c9 75 f1 4c 89 c0 c3 0f 1f 80 00 00 00 00 31 c0 eb 08 48 83 c0 01 84 d2 74 0f <0f> b6 14 07 3a 14 06 74 ef 19 c0 83 c8 01 c3 31 c0 c3 66 90 48 89 RSP: 0018:ffffb5fdc0963ca8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffffffb3a4e040 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9714c0d0b640 RDI: 0000000000000000 RBP: 0000000000000000 R08: 00000022986b7cde R09: ffffffffb3a4dff8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9714c50603c8 R13: 0000000000000000 R14: ffff97143fdf9e48 R15: ffff9714c01a2210 FS: 00007f1fa6785740(0000) GS:ffff9714da400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000002d863004 CR4: 00000000001706e0 Call Trace: __find_event_file+0x4e/0x80 action_create+0x6b7/0xeb0 ? kstrdup+0x44/0x60 event_hist_trigger_func+0x1a07/0x2130 trigger_process_regex+0xbd/0x110 event_trigger_write+0x71/0xd0 vfs_write+0xe9/0x310 ksys_write+0x68/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f1fa6879e87 The problem was the "trace(read_max,count)" where the "count" should be "$count" as "onmax()" only handles variables (although it really should be able to figure out that "count" is a field of sys_enter_read). But there's a path that does not find the variable and ends up passing a NULL for the event, which ends up getting passed to "strcmp()". Add a check for NULL to return and error on the command with: # cat error_log hist:syscalls:sys_enter_read: error: Couldn't create or find variable Command: hist:keys=common_pid:count=count:onmax($count).trace(read_max,count) ^ Cc: [email protected] Fixes: 5045060 tracing: Add 'onmax' hist trigger action support Signed-off-by: Steven Rostedt (VMware) <[email protected]>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Aug 12, 2021
… event name The following commands: # echo 'read_max u64 size;' > synthetic_events # echo 'hist:keys=common_pid:count=count:onmax($count).trace(read_max,count)' > events/syscalls/sys_enter_read/trigger Causes: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 4 PID: 1763 Comm: bash Not tainted 5.14.0-rc2-test+ torvalds#155 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:strcmp+0xc/0x20 Code: 75 f7 31 c0 0f b6 0c 06 88 0c 02 48 83 c0 01 84 c9 75 f1 4c 89 c0 c3 0f 1f 80 00 00 00 00 31 c0 eb 08 48 83 c0 01 84 d2 74 0f <0f> b6 14 07 3a 14 06 74 ef 19 c0 83 c8 01 c3 31 c0 c3 66 90 48 89 RSP: 0018:ffffb5fdc0963ca8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffffffb3a4e040 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9714c0d0b640 RDI: 0000000000000000 RBP: 0000000000000000 R08: 00000022986b7cde R09: ffffffffb3a4dff8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9714c50603c8 R13: 0000000000000000 R14: ffff97143fdf9e48 R15: ffff9714c01a2210 FS: 00007f1fa6785740(0000) GS:ffff9714da400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000002d863004 CR4: 00000000001706e0 Call Trace: __find_event_file+0x4e/0x80 action_create+0x6b7/0xeb0 ? kstrdup+0x44/0x60 event_hist_trigger_func+0x1a07/0x2130 trigger_process_regex+0xbd/0x110 event_trigger_write+0x71/0xd0 vfs_write+0xe9/0x310 ksys_write+0x68/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f1fa6879e87 The problem was the "trace(read_max,count)" where the "count" should be "$count" as "onmax()" only handles variables (although it really should be able to figure out that "count" is a field of sys_enter_read). But there's a path that does not find the variable and ends up passing a NULL for the event, which ends up getting passed to "strcmp()". Add a check for NULL to return and error on the command with: # cat error_log hist:syscalls:sys_enter_read: error: Couldn't create or find variable Command: hist:keys=common_pid:count=count:onmax($count).trace(read_max,count) ^ Link: https://lkml.kernel.org/r/[email protected] Cc: Masami Hiramatsu <[email protected]> Cc: [email protected] Fixes: 5045060 tracing: Add 'onmax' hist trigger action support Reviewed-by: Tom Zanussi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
fengguang
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Aug 13, 2021
… event name The following commands: # echo 'read_max u64 size;' > synthetic_events # echo 'hist:keys=common_pid:count=count:onmax($count).trace(read_max,count)' > events/syscalls/sys_enter_read/trigger Causes: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 4 PID: 1763 Comm: bash Not tainted 5.14.0-rc2-test+ torvalds#155 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:strcmp+0xc/0x20 Code: 75 f7 31 c0 0f b6 0c 06 88 0c 02 48 83 c0 01 84 c9 75 f1 4c 89 c0 c3 0f 1f 80 00 00 00 00 31 c0 eb 08 48 83 c0 01 84 d2 74 0f <0f> b6 14 07 3a 14 06 74 ef 19 c0 83 c8 01 c3 31 c0 c3 66 90 48 89 RSP: 0018:ffffb5fdc0963ca8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffffffb3a4e040 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9714c0d0b640 RDI: 0000000000000000 RBP: 0000000000000000 R08: 00000022986b7cde R09: ffffffffb3a4dff8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9714c50603c8 R13: 0000000000000000 R14: ffff97143fdf9e48 R15: ffff9714c01a2210 FS: 00007f1fa6785740(0000) GS:ffff9714da400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000002d863004 CR4: 00000000001706e0 Call Trace: __find_event_file+0x4e/0x80 action_create+0x6b7/0xeb0 ? kstrdup+0x44/0x60 event_hist_trigger_func+0x1a07/0x2130 trigger_process_regex+0xbd/0x110 event_trigger_write+0x71/0xd0 vfs_write+0xe9/0x310 ksys_write+0x68/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f1fa6879e87 The problem was the "trace(read_max,count)" where the "count" should be "$count" as "onmax()" only handles variables (although it really should be able to figure out that "count" is a field of sys_enter_read). But there's a path that does not find the variable and ends up passing a NULL for the event, which ends up getting passed to "strcmp()". Add a check for NULL to return and error on the command with: # cat error_log hist:syscalls:sys_enter_read: error: Couldn't create or find variable Command: hist:keys=common_pid:count=count:onmax($count).trace(read_max,count) ^ Link: https://lkml.kernel.org/r/[email protected] Cc: Masami Hiramatsu <[email protected]> Cc: [email protected] Fixes: 5045060 tracing: Add 'onmax' hist trigger action support Reviewed-by: Tom Zanussi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
mrchapp
pushed a commit
to mrchapp/linux
that referenced
this pull request
Aug 25, 2021
… event name [ Upstream commit 5acce0b ] The following commands: # echo 'read_max u64 size;' > synthetic_events # echo 'hist:keys=common_pid:count=count:onmax($count).trace(read_max,count)' > events/syscalls/sys_enter_read/trigger Causes: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 4 PID: 1763 Comm: bash Not tainted 5.14.0-rc2-test+ torvalds#155 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:strcmp+0xc/0x20 Code: 75 f7 31 c0 0f b6 0c 06 88 0c 02 48 83 c0 01 84 c9 75 f1 4c 89 c0 c3 0f 1f 80 00 00 00 00 31 c0 eb 08 48 83 c0 01 84 d2 74 0f <0f> b6 14 07 3a 14 06 74 ef 19 c0 83 c8 01 c3 31 c0 c3 66 90 48 89 RSP: 0018:ffffb5fdc0963ca8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffffffb3a4e040 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9714c0d0b640 RDI: 0000000000000000 RBP: 0000000000000000 R08: 00000022986b7cde R09: ffffffffb3a4dff8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9714c50603c8 R13: 0000000000000000 R14: ffff97143fdf9e48 R15: ffff9714c01a2210 FS: 00007f1fa6785740(0000) GS:ffff9714da400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000002d863004 CR4: 00000000001706e0 Call Trace: __find_event_file+0x4e/0x80 action_create+0x6b7/0xeb0 ? kstrdup+0x44/0x60 event_hist_trigger_func+0x1a07/0x2130 trigger_process_regex+0xbd/0x110 event_trigger_write+0x71/0xd0 vfs_write+0xe9/0x310 ksys_write+0x68/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f1fa6879e87 The problem was the "trace(read_max,count)" where the "count" should be "$count" as "onmax()" only handles variables (although it really should be able to figure out that "count" is a field of sys_enter_read). But there's a path that does not find the variable and ends up passing a NULL for the event, which ends up getting passed to "strcmp()". Add a check for NULL to return and error on the command with: # cat error_log hist:syscalls:sys_enter_read: error: Couldn't create or find variable Command: hist:keys=common_pid:count=count:onmax($count).trace(read_max,count) ^ Link: https://lkml.kernel.org/r/[email protected] Cc: Masami Hiramatsu <[email protected]> Cc: [email protected] Fixes: 5045060 tracing: Add 'onmax' hist trigger action support Reviewed-by: Tom Zanussi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
heiher
pushed a commit
to heiher/linux
that referenced
this pull request
Aug 26, 2021
… event name [ Upstream commit 5acce0b ] The following commands: # echo 'read_max u64 size;' > synthetic_events # echo 'hist:keys=common_pid:count=count:onmax($count).trace(read_max,count)' > events/syscalls/sys_enter_read/trigger Causes: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 4 PID: 1763 Comm: bash Not tainted 5.14.0-rc2-test+ torvalds#155 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:strcmp+0xc/0x20 Code: 75 f7 31 c0 0f b6 0c 06 88 0c 02 48 83 c0 01 84 c9 75 f1 4c 89 c0 c3 0f 1f 80 00 00 00 00 31 c0 eb 08 48 83 c0 01 84 d2 74 0f <0f> b6 14 07 3a 14 06 74 ef 19 c0 83 c8 01 c3 31 c0 c3 66 90 48 89 RSP: 0018:ffffb5fdc0963ca8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffffffb3a4e040 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9714c0d0b640 RDI: 0000000000000000 RBP: 0000000000000000 R08: 00000022986b7cde R09: ffffffffb3a4dff8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9714c50603c8 R13: 0000000000000000 R14: ffff97143fdf9e48 R15: ffff9714c01a2210 FS: 00007f1fa6785740(0000) GS:ffff9714da400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000002d863004 CR4: 00000000001706e0 Call Trace: __find_event_file+0x4e/0x80 action_create+0x6b7/0xeb0 ? kstrdup+0x44/0x60 event_hist_trigger_func+0x1a07/0x2130 trigger_process_regex+0xbd/0x110 event_trigger_write+0x71/0xd0 vfs_write+0xe9/0x310 ksys_write+0x68/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f1fa6879e87 The problem was the "trace(read_max,count)" where the "count" should be "$count" as "onmax()" only handles variables (although it really should be able to figure out that "count" is a field of sys_enter_read). But there's a path that does not find the variable and ends up passing a NULL for the event, which ends up getting passed to "strcmp()". Add a check for NULL to return and error on the command with: # cat error_log hist:syscalls:sys_enter_read: error: Couldn't create or find variable Command: hist:keys=common_pid:count=count:onmax($count).trace(read_max,count) ^ Link: https://lkml.kernel.org/r/[email protected] Cc: Masami Hiramatsu <[email protected]> Cc: [email protected] Fixes: 5045060 tracing: Add 'onmax' hist trigger action support Reviewed-by: Tom Zanussi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
staging-kernelci-org
pushed a commit
to kernelci/linux
that referenced
this pull request
Aug 26, 2021
… event name [ Upstream commit 5acce0b ] The following commands: # echo 'read_max u64 size;' > synthetic_events # echo 'hist:keys=common_pid:count=count:onmax($count).trace(read_max,count)' > events/syscalls/sys_enter_read/trigger Causes: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 4 PID: 1763 Comm: bash Not tainted 5.14.0-rc2-test+ torvalds#155 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:strcmp+0xc/0x20 Code: 75 f7 31 c0 0f b6 0c 06 88 0c 02 48 83 c0 01 84 c9 75 f1 4c 89 c0 c3 0f 1f 80 00 00 00 00 31 c0 eb 08 48 83 c0 01 84 d2 74 0f <0f> b6 14 07 3a 14 06 74 ef 19 c0 83 c8 01 c3 31 c0 c3 66 90 48 89 RSP: 0018:ffffb5fdc0963ca8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffffffb3a4e040 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9714c0d0b640 RDI: 0000000000000000 RBP: 0000000000000000 R08: 00000022986b7cde R09: ffffffffb3a4dff8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9714c50603c8 R13: 0000000000000000 R14: ffff97143fdf9e48 R15: ffff9714c01a2210 FS: 00007f1fa6785740(0000) GS:ffff9714da400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000002d863004 CR4: 00000000001706e0 Call Trace: __find_event_file+0x4e/0x80 action_create+0x6b7/0xeb0 ? kstrdup+0x44/0x60 event_hist_trigger_func+0x1a07/0x2130 trigger_process_regex+0xbd/0x110 event_trigger_write+0x71/0xd0 vfs_write+0xe9/0x310 ksys_write+0x68/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f1fa6879e87 The problem was the "trace(read_max,count)" where the "count" should be "$count" as "onmax()" only handles variables (although it really should be able to figure out that "count" is a field of sys_enter_read). But there's a path that does not find the variable and ends up passing a NULL for the event, which ends up getting passed to "strcmp()". Add a check for NULL to return and error on the command with: # cat error_log hist:syscalls:sys_enter_read: error: Couldn't create or find variable Command: hist:keys=common_pid:count=count:onmax($count).trace(read_max,count) ^ Link: https://lkml.kernel.org/r/[email protected] Cc: Masami Hiramatsu <[email protected]> Cc: [email protected] Fixes: 5045060 tracing: Add 'onmax' hist trigger action support Reviewed-by: Tom Zanussi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
mrchapp
pushed a commit
to mrchapp/linux
that referenced
this pull request
Sep 2, 2021
… event name [ Upstream commit 5acce0b ] The following commands: # echo 'read_max u64 size;' > synthetic_events # echo 'hist:keys=common_pid:count=count:onmax($count).trace(read_max,count)' > events/syscalls/sys_enter_read/trigger Causes: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 4 PID: 1763 Comm: bash Not tainted 5.14.0-rc2-test+ torvalds#155 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:strcmp+0xc/0x20 Code: 75 f7 31 c0 0f b6 0c 06 88 0c 02 48 83 c0 01 84 c9 75 f1 4c 89 c0 c3 0f 1f 80 00 00 00 00 31 c0 eb 08 48 83 c0 01 84 d2 74 0f <0f> b6 14 07 3a 14 06 74 ef 19 c0 83 c8 01 c3 31 c0 c3 66 90 48 89 RSP: 0018:ffffb5fdc0963ca8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffffffb3a4e040 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9714c0d0b640 RDI: 0000000000000000 RBP: 0000000000000000 R08: 00000022986b7cde R09: ffffffffb3a4dff8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9714c50603c8 R13: 0000000000000000 R14: ffff97143fdf9e48 R15: ffff9714c01a2210 FS: 00007f1fa6785740(0000) GS:ffff9714da400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000002d863004 CR4: 00000000001706e0 Call Trace: __find_event_file+0x4e/0x80 action_create+0x6b7/0xeb0 ? kstrdup+0x44/0x60 event_hist_trigger_func+0x1a07/0x2130 trigger_process_regex+0xbd/0x110 event_trigger_write+0x71/0xd0 vfs_write+0xe9/0x310 ksys_write+0x68/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f1fa6879e87 The problem was the "trace(read_max,count)" where the "count" should be "$count" as "onmax()" only handles variables (although it really should be able to figure out that "count" is a field of sys_enter_read). But there's a path that does not find the variable and ends up passing a NULL for the event, which ends up getting passed to "strcmp()". Add a check for NULL to return and error on the command with: # cat error_log hist:syscalls:sys_enter_read: error: Couldn't create or find variable Command: hist:keys=common_pid:count=count:onmax($count).trace(read_max,count) ^ Link: https://lkml.kernel.org/r/[email protected] Cc: Masami Hiramatsu <[email protected]> Cc: [email protected] Fixes: 5045060 tracing: Add 'onmax' hist trigger action support Reviewed-by: Tom Zanussi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
snajpa
pushed a commit
to vpsfreecz/linux
that referenced
this pull request
Sep 9, 2021
… event name [ Upstream commit 5acce0b ] The following commands: # echo 'read_max u64 size;' > synthetic_events # echo 'hist:keys=common_pid:count=count:onmax($count).trace(read_max,count)' > events/syscalls/sys_enter_read/trigger Causes: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 4 PID: 1763 Comm: bash Not tainted 5.14.0-rc2-test+ torvalds#155 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:strcmp+0xc/0x20 Code: 75 f7 31 c0 0f b6 0c 06 88 0c 02 48 83 c0 01 84 c9 75 f1 4c 89 c0 c3 0f 1f 80 00 00 00 00 31 c0 eb 08 48 83 c0 01 84 d2 74 0f <0f> b6 14 07 3a 14 06 74 ef 19 c0 83 c8 01 c3 31 c0 c3 66 90 48 89 RSP: 0018:ffffb5fdc0963ca8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffffffb3a4e040 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9714c0d0b640 RDI: 0000000000000000 RBP: 0000000000000000 R08: 00000022986b7cde R09: ffffffffb3a4dff8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9714c50603c8 R13: 0000000000000000 R14: ffff97143fdf9e48 R15: ffff9714c01a2210 FS: 00007f1fa6785740(0000) GS:ffff9714da400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000002d863004 CR4: 00000000001706e0 Call Trace: __find_event_file+0x4e/0x80 action_create+0x6b7/0xeb0 ? kstrdup+0x44/0x60 event_hist_trigger_func+0x1a07/0x2130 trigger_process_regex+0xbd/0x110 event_trigger_write+0x71/0xd0 vfs_write+0xe9/0x310 ksys_write+0x68/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f1fa6879e87 The problem was the "trace(read_max,count)" where the "count" should be "$count" as "onmax()" only handles variables (although it really should be able to figure out that "count" is a field of sys_enter_read). But there's a path that does not find the variable and ends up passing a NULL for the event, which ends up getting passed to "strcmp()". Add a check for NULL to return and error on the command with: # cat error_log hist:syscalls:sys_enter_read: error: Couldn't create or find variable Command: hist:keys=common_pid:count=count:onmax($count).trace(read_max,count) ^ Link: https://lkml.kernel.org/r/[email protected] Cc: Masami Hiramatsu <[email protected]> Cc: [email protected] Fixes: 5045060 tracing: Add 'onmax' hist trigger action support Reviewed-by: Tom Zanussi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
vlsunil
pushed a commit
to ventana-micro-systems/RISC-V-Linux
that referenced
this pull request
Nov 23, 2021
… event name The following commands: # echo 'read_max u64 size;' > synthetic_events # echo 'hist:keys=common_pid:count=count:onmax($count).trace(read_max,count)' > events/syscalls/sys_enter_read/trigger Causes: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 4 PID: 1763 Comm: bash Not tainted 5.14.0-rc2-test+ torvalds#155 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:strcmp+0xc/0x20 Code: 75 f7 31 c0 0f b6 0c 06 88 0c 02 48 83 c0 01 84 c9 75 f1 4c 89 c0 c3 0f 1f 80 00 00 00 00 31 c0 eb 08 48 83 c0 01 84 d2 74 0f <0f> b6 14 07 3a 14 06 74 ef 19 c0 83 c8 01 c3 31 c0 c3 66 90 48 89 RSP: 0018:ffffb5fdc0963ca8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffffffb3a4e040 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9714c0d0b640 RDI: 0000000000000000 RBP: 0000000000000000 R08: 00000022986b7cde R09: ffffffffb3a4dff8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9714c50603c8 R13: 0000000000000000 R14: ffff97143fdf9e48 R15: ffff9714c01a2210 FS: 00007f1fa6785740(0000) GS:ffff9714da400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000002d863004 CR4: 00000000001706e0 Call Trace: __find_event_file+0x4e/0x80 action_create+0x6b7/0xeb0 ? kstrdup+0x44/0x60 event_hist_trigger_func+0x1a07/0x2130 trigger_process_regex+0xbd/0x110 event_trigger_write+0x71/0xd0 vfs_write+0xe9/0x310 ksys_write+0x68/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f1fa6879e87 The problem was the "trace(read_max,count)" where the "count" should be "$count" as "onmax()" only handles variables (although it really should be able to figure out that "count" is a field of sys_enter_read). But there's a path that does not find the variable and ends up passing a NULL for the event, which ends up getting passed to "strcmp()". Add a check for NULL to return and error on the command with: # cat error_log hist:syscalls:sys_enter_read: error: Couldn't create or find variable Command: hist:keys=common_pid:count=count:onmax($count).trace(read_max,count) ^ Link: https://lkml.kernel.org/r/[email protected] Cc: Masami Hiramatsu <[email protected]> Cc: [email protected] Fixes: 5045060 tracing: Add 'onmax' hist trigger action support Reviewed-by: Tom Zanussi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
May 5, 2022
we got issue as follows: EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls ------------[ cut here ]------------ kernel BUG at fs/ext4/inode.c:2708! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-20220413+ torvalds#155 RIP: 0010:ext4_writepages+0x1977/0x1c10 RSP: 0018:ffff88811d3e7880 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88811c098000 RDX: 0000000000000000 RSI: ffff88811c098000 RDI: 0000000000000002 RBP: ffff888128140f50 R08: ffffffffb1ff6387 R09: 0000000000000000 R10: 0000000000000007 R11: ffffed10250281ea R12: 0000000000000001 R13: 00000000000000a4 R14: ffff88811d3e7bb8 R15: ffff888128141028 FS: 00007f443aed9740(0000) GS:ffff8883aef00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020007200 CR3: 000000011c2a4000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> do_writepages+0x130/0x3a0 filemap_fdatawrite_wbc+0x83/0xa0 filemap_flush+0xab/0xe0 ext4_alloc_da_blocks+0x51/0x120 __ext4_ioctl+0x1534/0x3210 __x64_sys_ioctl+0x12c/0x170 do_syscall_64+0x3b/0x90 It may happen as follows: 1. write inline_data inode vfs_write new_sync_write ext4_file_write_iter ext4_buffered_write_iter generic_perform_write ext4_da_write_begin ext4_da_write_inline_data_begin -> If inline data size too small will allocate block to write, then mapping will has dirty page ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA 2. fallocate do_vfs_ioctl ioctl_preallocate vfs_fallocate ext4_fallocate ext4_convert_inline_data ext4_convert_inline_data_nolock ext4_map_blocks -> fail will goto restore data ext4_restore_inline_data ext4_create_inline_data ext4_write_inline_data ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA 3. writepages __ext4_ioctl ext4_alloc_da_blocks filemap_flush filemap_fdatawrite_wbc do_writepages ext4_writepages if (ext4_has_inline_data(inode)) BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) To solved this issue, record origin 'EXT4_STATE_MAY_INLINE_DATA' flag, then pass value to 'ext4_restore_inline_data', 'ext4_restore_inline_data' will decide to if recovery 'EXT4_STATE_MAY_INLINE_DATA' flag according to parameter. Signed-off-by: Ye Bin <[email protected]>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
May 10, 2022
we got issue as follows: EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls ------------[ cut here ]------------ kernel BUG at fs/ext4/inode.c:2708! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-20220413+ torvalds#155 RIP: 0010:ext4_writepages+0x1977/0x1c10 RSP: 0018:ffff88811d3e7880 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88811c098000 RDX: 0000000000000000 RSI: ffff88811c098000 RDI: 0000000000000002 RBP: ffff888128140f50 R08: ffffffffb1ff6387 R09: 0000000000000000 R10: 0000000000000007 R11: ffffed10250281ea R12: 0000000000000001 R13: 00000000000000a4 R14: ffff88811d3e7bb8 R15: ffff888128141028 FS: 00007f443aed9740(0000) GS:ffff8883aef00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020007200 CR3: 000000011c2a4000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> do_writepages+0x130/0x3a0 filemap_fdatawrite_wbc+0x83/0xa0 filemap_flush+0xab/0xe0 ext4_alloc_da_blocks+0x51/0x120 __ext4_ioctl+0x1534/0x3210 __x64_sys_ioctl+0x12c/0x170 do_syscall_64+0x3b/0x90 It may happen as follows: 1. write inline_data inode vfs_write new_sync_write ext4_file_write_iter ext4_buffered_write_iter generic_perform_write ext4_da_write_begin ext4_da_write_inline_data_begin -> If inline data size too small will allocate block to write, then mapping will has dirty page ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA 2. fallocate do_vfs_ioctl ioctl_preallocate vfs_fallocate ext4_fallocate ext4_convert_inline_data ext4_convert_inline_data_nolock ext4_map_blocks -> fail will goto restore data ext4_restore_inline_data ext4_create_inline_data ext4_write_inline_data ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA 3. writepages __ext4_ioctl ext4_alloc_da_blocks filemap_flush filemap_fdatawrite_wbc do_writepages ext4_writepages if (ext4_has_inline_data(inode)) BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) The root cause of this issue is we destory inline data until call ext4_writepages under delay allocation mode. But there maybe already covert from inline to extent. To solved this issue, we call filemap_flush firstly. Signed-off-by: Ye Bin <[email protected]>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
May 16, 2022
we got issue as follows: EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls ------------[ cut here ]------------ kernel BUG at fs/ext4/inode.c:2708! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-20220413+ torvalds#155 RIP: 0010:ext4_writepages+0x1977/0x1c10 RSP: 0018:ffff88811d3e7880 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88811c098000 RDX: 0000000000000000 RSI: ffff88811c098000 RDI: 0000000000000002 RBP: ffff888128140f50 R08: ffffffffb1ff6387 R09: 0000000000000000 R10: 0000000000000007 R11: ffffed10250281ea R12: 0000000000000001 R13: 00000000000000a4 R14: ffff88811d3e7bb8 R15: ffff888128141028 FS: 00007f443aed9740(0000) GS:ffff8883aef00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020007200 CR3: 000000011c2a4000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> do_writepages+0x130/0x3a0 filemap_fdatawrite_wbc+0x83/0xa0 filemap_flush+0xab/0xe0 ext4_alloc_da_blocks+0x51/0x120 __ext4_ioctl+0x1534/0x3210 __x64_sys_ioctl+0x12c/0x170 do_syscall_64+0x3b/0x90 It may happen as follows: 1. write inline_data inode vfs_write new_sync_write ext4_file_write_iter ext4_buffered_write_iter generic_perform_write ext4_da_write_begin ext4_da_write_inline_data_begin -> If inline data size too small will allocate block to write, then mapping will has dirty page ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA 2. fallocate do_vfs_ioctl ioctl_preallocate vfs_fallocate ext4_fallocate ext4_convert_inline_data ext4_convert_inline_data_nolock ext4_map_blocks -> fail will goto restore data ext4_restore_inline_data ext4_create_inline_data ext4_write_inline_data ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA 3. writepages __ext4_ioctl ext4_alloc_da_blocks filemap_flush filemap_fdatawrite_wbc do_writepages ext4_writepages if (ext4_has_inline_data(inode)) BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) The root cause of this issue is we destory inline data until call ext4_writepages under delay allocation mode. But there maybe already covert from inline to extent. To solved this issue, we call filemap_flush firstly. Signed-off-by: Ye Bin <[email protected]>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
May 16, 2022
we got issue as follows: EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls ------------[ cut here ]------------ kernel BUG at fs/ext4/inode.c:2708! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-20220413+ torvalds#155 RIP: 0010:ext4_writepages+0x1977/0x1c10 RSP: 0018:ffff88811d3e7880 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88811c098000 RDX: 0000000000000000 RSI: ffff88811c098000 RDI: 0000000000000002 RBP: ffff888128140f50 R08: ffffffffb1ff6387 R09: 0000000000000000 R10: 0000000000000007 R11: ffffed10250281ea R12: 0000000000000001 R13: 00000000000000a4 R14: ffff88811d3e7bb8 R15: ffff888128141028 FS: 00007f443aed9740(0000) GS:ffff8883aef00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020007200 CR3: 000000011c2a4000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> do_writepages+0x130/0x3a0 filemap_fdatawrite_wbc+0x83/0xa0 filemap_flush+0xab/0xe0 ext4_alloc_da_blocks+0x51/0x120 __ext4_ioctl+0x1534/0x3210 __x64_sys_ioctl+0x12c/0x170 do_syscall_64+0x3b/0x90 It may happen as follows: 1. write inline_data inode vfs_write new_sync_write ext4_file_write_iter ext4_buffered_write_iter generic_perform_write ext4_da_write_begin ext4_da_write_inline_data_begin -> If inline data size too small will allocate block to write, then mapping will has dirty page ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA 2. fallocate do_vfs_ioctl ioctl_preallocate vfs_fallocate ext4_fallocate ext4_convert_inline_data ext4_convert_inline_data_nolock ext4_map_blocks -> fail will goto restore data ext4_restore_inline_data ext4_create_inline_data ext4_write_inline_data ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA 3. writepages __ext4_ioctl ext4_alloc_da_blocks filemap_flush filemap_fdatawrite_wbc do_writepages ext4_writepages if (ext4_has_inline_data(inode)) BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) The root cause of this issue is we destory inline data until call ext4_writepages under delay allocation mode. But there maybe already covert from inline to extent. To solved this issue, we call filemap_flush firstly. Signed-off-by: Ye Bin <[email protected]> Reviewed-by: Jan Kara <[email protected]>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
May 20, 2022
we got issue as follows: EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls ------------[ cut here ]------------ kernel BUG at fs/ext4/inode.c:2708! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-20220413+ torvalds#155 RIP: 0010:ext4_writepages+0x1977/0x1c10 RSP: 0018:ffff88811d3e7880 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88811c098000 RDX: 0000000000000000 RSI: ffff88811c098000 RDI: 0000000000000002 RBP: ffff888128140f50 R08: ffffffffb1ff6387 R09: 0000000000000000 R10: 0000000000000007 R11: ffffed10250281ea R12: 0000000000000001 R13: 00000000000000a4 R14: ffff88811d3e7bb8 R15: ffff888128141028 FS: 00007f443aed9740(0000) GS:ffff8883aef00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020007200 CR3: 000000011c2a4000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> do_writepages+0x130/0x3a0 filemap_fdatawrite_wbc+0x83/0xa0 filemap_flush+0xab/0xe0 ext4_alloc_da_blocks+0x51/0x120 __ext4_ioctl+0x1534/0x3210 __x64_sys_ioctl+0x12c/0x170 do_syscall_64+0x3b/0x90 It may happen as follows: 1. write inline_data inode vfs_write new_sync_write ext4_file_write_iter ext4_buffered_write_iter generic_perform_write ext4_da_write_begin ext4_da_write_inline_data_begin -> If inline data size too small will allocate block to write, then mapping will has dirty page ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA 2. fallocate do_vfs_ioctl ioctl_preallocate vfs_fallocate ext4_fallocate ext4_convert_inline_data ext4_convert_inline_data_nolock ext4_map_blocks -> fail will goto restore data ext4_restore_inline_data ext4_create_inline_data ext4_write_inline_data ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA 3. writepages __ext4_ioctl ext4_alloc_da_blocks filemap_flush filemap_fdatawrite_wbc do_writepages ext4_writepages if (ext4_has_inline_data(inode)) BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) The root cause of this issue is we destory inline data until call ext4_writepages under delay allocation mode. But there maybe already convert from inline to extent. To solve this issue, we call filemap_flush first.. Cc: [email protected] Signed-off-by: Ye Bin <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>
roxell
pushed a commit
to roxell/linux
that referenced
this pull request
May 23, 2022
we got issue as follows: EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls ------------[ cut here ]------------ kernel BUG at fs/ext4/inode.c:2708! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-20220413+ torvalds#155 RIP: 0010:ext4_writepages+0x1977/0x1c10 RSP: 0018:ffff88811d3e7880 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88811c098000 RDX: 0000000000000000 RSI: ffff88811c098000 RDI: 0000000000000002 RBP: ffff888128140f50 R08: ffffffffb1ff6387 R09: 0000000000000000 R10: 0000000000000007 R11: ffffed10250281ea R12: 0000000000000001 R13: 00000000000000a4 R14: ffff88811d3e7bb8 R15: ffff888128141028 FS: 00007f443aed9740(0000) GS:ffff8883aef00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020007200 CR3: 000000011c2a4000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> do_writepages+0x130/0x3a0 filemap_fdatawrite_wbc+0x83/0xa0 filemap_flush+0xab/0xe0 ext4_alloc_da_blocks+0x51/0x120 __ext4_ioctl+0x1534/0x3210 __x64_sys_ioctl+0x12c/0x170 do_syscall_64+0x3b/0x90 It may happen as follows: 1. write inline_data inode vfs_write new_sync_write ext4_file_write_iter ext4_buffered_write_iter generic_perform_write ext4_da_write_begin ext4_da_write_inline_data_begin -> If inline data size too small will allocate block to write, then mapping will has dirty page ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA 2. fallocate do_vfs_ioctl ioctl_preallocate vfs_fallocate ext4_fallocate ext4_convert_inline_data ext4_convert_inline_data_nolock ext4_map_blocks -> fail will goto restore data ext4_restore_inline_data ext4_create_inline_data ext4_write_inline_data ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA 3. writepages __ext4_ioctl ext4_alloc_da_blocks filemap_flush filemap_fdatawrite_wbc do_writepages ext4_writepages if (ext4_has_inline_data(inode)) BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) The root cause of this issue is we destory inline data until call ext4_writepages under delay allocation mode. But there maybe already convert from inline to extent. To solve this issue, we call filemap_flush first.. Cc: [email protected] Signed-off-by: Ye Bin <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>
ammarfaizi2
pushed a commit
to ammarfaizi2/linux-fork
that referenced
this pull request
Jul 12, 2022
commit 9827a0e upstream. New elements that reside in the clone are not released in case that the transaction is aborted. [16302.231754] ------------[ cut here ]------------ [16302.231756] WARNING: CPU: 0 PID: 100509 at net/netfilter/nf_tables_api.c:1864 nf_tables_chain_destroy+0x26/0x127 [nf_tables] [...] [16302.231882] CPU: 0 PID: 100509 Comm: nft Tainted: G W 5.19.0-rc3+ torvalds#155 [...] [16302.231887] RIP: 0010:nf_tables_chain_destroy+0x26/0x127 [nf_tables] [16302.231899] Code: f3 fe ff ff 41 55 41 54 55 53 48 8b 6f 10 48 89 fb 48 c7 c7 82 96 d9 a0 8b 55 50 48 8b 75 58 e8 de f5 92 e0 83 7d 50 00 74 09 <0f> 0b 5b 5d 41 5c 41 5d c3 4c 8b 65 00 48 8b 7d 08 49 39 fc 74 05 [...] [16302.231917] Call Trace: [16302.231919] <TASK> [16302.231921] __nf_tables_abort.cold+0x23/0x28 [nf_tables] [16302.231934] nf_tables_abort+0x30/0x50 [nf_tables] [16302.231946] nfnetlink_rcv_batch+0x41a/0x840 [nfnetlink] [16302.231952] ? __nla_validate_parse+0x48/0x190 [16302.231959] nfnetlink_rcv+0x110/0x129 [nfnetlink] [16302.231963] netlink_unicast+0x211/0x340 [16302.231969] netlink_sendmsg+0x21e/0x460 Add nft_set_pipapo_match_destroy() helper function to release the elements in the lookup tables. Stefano Brivio says: "We additionally look for elements pointers in the cloned matching data if priv->dirty is set, because that means that cloned data might point to additional elements we did not commit to the working copy yet (such as the abort path case, but perhaps not limited to it)." Fixes: 3c4287f ("nf_tables: Add set type for arbitrary concatenation of ranges") Reviewed-by: Stefano Brivio <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2
pushed a commit
to ammarfaizi2/linux-fork
that referenced
this pull request
Jul 12, 2022
commit 9827a0e upstream. New elements that reside in the clone are not released in case that the transaction is aborted. [16302.231754] ------------[ cut here ]------------ [16302.231756] WARNING: CPU: 0 PID: 100509 at net/netfilter/nf_tables_api.c:1864 nf_tables_chain_destroy+0x26/0x127 [nf_tables] [...] [16302.231882] CPU: 0 PID: 100509 Comm: nft Tainted: G W 5.19.0-rc3+ torvalds#155 [...] [16302.231887] RIP: 0010:nf_tables_chain_destroy+0x26/0x127 [nf_tables] [16302.231899] Code: f3 fe ff ff 41 55 41 54 55 53 48 8b 6f 10 48 89 fb 48 c7 c7 82 96 d9 a0 8b 55 50 48 8b 75 58 e8 de f5 92 e0 83 7d 50 00 74 09 <0f> 0b 5b 5d 41 5c 41 5d c3 4c 8b 65 00 48 8b 7d 08 49 39 fc 74 05 [...] [16302.231917] Call Trace: [16302.231919] <TASK> [16302.231921] __nf_tables_abort.cold+0x23/0x28 [nf_tables] [16302.231934] nf_tables_abort+0x30/0x50 [nf_tables] [16302.231946] nfnetlink_rcv_batch+0x41a/0x840 [nfnetlink] [16302.231952] ? __nla_validate_parse+0x48/0x190 [16302.231959] nfnetlink_rcv+0x110/0x129 [nfnetlink] [16302.231963] netlink_unicast+0x211/0x340 [16302.231969] netlink_sendmsg+0x21e/0x460 Add nft_set_pipapo_match_destroy() helper function to release the elements in the lookup tables. Stefano Brivio says: "We additionally look for elements pointers in the cloned matching data if priv->dirty is set, because that means that cloned data might point to additional elements we did not commit to the working copy yet (such as the abort path case, but perhaps not limited to it)." Fixes: 3c4287f ("nf_tables: Add set type for arbitrary concatenation of ranges") Reviewed-by: Stefano Brivio <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2
pushed a commit
to ammarfaizi2/linux-fork
that referenced
this pull request
Jul 12, 2022
commit 9827a0e upstream. New elements that reside in the clone are not released in case that the transaction is aborted. [16302.231754] ------------[ cut here ]------------ [16302.231756] WARNING: CPU: 0 PID: 100509 at net/netfilter/nf_tables_api.c:1864 nf_tables_chain_destroy+0x26/0x127 [nf_tables] [...] [16302.231882] CPU: 0 PID: 100509 Comm: nft Tainted: G W 5.19.0-rc3+ torvalds#155 [...] [16302.231887] RIP: 0010:nf_tables_chain_destroy+0x26/0x127 [nf_tables] [16302.231899] Code: f3 fe ff ff 41 55 41 54 55 53 48 8b 6f 10 48 89 fb 48 c7 c7 82 96 d9 a0 8b 55 50 48 8b 75 58 e8 de f5 92 e0 83 7d 50 00 74 09 <0f> 0b 5b 5d 41 5c 41 5d c3 4c 8b 65 00 48 8b 7d 08 49 39 fc 74 05 [...] [16302.231917] Call Trace: [16302.231919] <TASK> [16302.231921] __nf_tables_abort.cold+0x23/0x28 [nf_tables] [16302.231934] nf_tables_abort+0x30/0x50 [nf_tables] [16302.231946] nfnetlink_rcv_batch+0x41a/0x840 [nfnetlink] [16302.231952] ? __nla_validate_parse+0x48/0x190 [16302.231959] nfnetlink_rcv+0x110/0x129 [nfnetlink] [16302.231963] netlink_unicast+0x211/0x340 [16302.231969] netlink_sendmsg+0x21e/0x460 Add nft_set_pipapo_match_destroy() helper function to release the elements in the lookup tables. Stefano Brivio says: "We additionally look for elements pointers in the cloned matching data if priv->dirty is set, because that means that cloned data might point to additional elements we did not commit to the working copy yet (such as the abort path case, but perhaps not limited to it)." Fixes: 3c4287f ("nf_tables: Add set type for arbitrary concatenation of ranges") Reviewed-by: Stefano Brivio <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2
pushed a commit
to ammarfaizi2/linux-fork
that referenced
this pull request
Jul 12, 2022
commit 9827a0e upstream. New elements that reside in the clone are not released in case that the transaction is aborted. [16302.231754] ------------[ cut here ]------------ [16302.231756] WARNING: CPU: 0 PID: 100509 at net/netfilter/nf_tables_api.c:1864 nf_tables_chain_destroy+0x26/0x127 [nf_tables] [...] [16302.231882] CPU: 0 PID: 100509 Comm: nft Tainted: G W 5.19.0-rc3+ torvalds#155 [...] [16302.231887] RIP: 0010:nf_tables_chain_destroy+0x26/0x127 [nf_tables] [16302.231899] Code: f3 fe ff ff 41 55 41 54 55 53 48 8b 6f 10 48 89 fb 48 c7 c7 82 96 d9 a0 8b 55 50 48 8b 75 58 e8 de f5 92 e0 83 7d 50 00 74 09 <0f> 0b 5b 5d 41 5c 41 5d c3 4c 8b 65 00 48 8b 7d 08 49 39 fc 74 05 [...] [16302.231917] Call Trace: [16302.231919] <TASK> [16302.231921] __nf_tables_abort.cold+0x23/0x28 [nf_tables] [16302.231934] nf_tables_abort+0x30/0x50 [nf_tables] [16302.231946] nfnetlink_rcv_batch+0x41a/0x840 [nfnetlink] [16302.231952] ? __nla_validate_parse+0x48/0x190 [16302.231959] nfnetlink_rcv+0x110/0x129 [nfnetlink] [16302.231963] netlink_unicast+0x211/0x340 [16302.231969] netlink_sendmsg+0x21e/0x460 Add nft_set_pipapo_match_destroy() helper function to release the elements in the lookup tables. Stefano Brivio says: "We additionally look for elements pointers in the cloned matching data if priv->dirty is set, because that means that cloned data might point to additional elements we did not commit to the working copy yet (such as the abort path case, but perhaps not limited to it)." Fixes: 3c4287f ("nf_tables: Add set type for arbitrary concatenation of ranges") Reviewed-by: Stefano Brivio <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2
pushed a commit
to ammarfaizi2/linux-fork
that referenced
this pull request
Jul 12, 2022
commit 9827a0e upstream. New elements that reside in the clone are not released in case that the transaction is aborted. [16302.231754] ------------[ cut here ]------------ [16302.231756] WARNING: CPU: 0 PID: 100509 at net/netfilter/nf_tables_api.c:1864 nf_tables_chain_destroy+0x26/0x127 [nf_tables] [...] [16302.231882] CPU: 0 PID: 100509 Comm: nft Tainted: G W 5.19.0-rc3+ torvalds#155 [...] [16302.231887] RIP: 0010:nf_tables_chain_destroy+0x26/0x127 [nf_tables] [16302.231899] Code: f3 fe ff ff 41 55 41 54 55 53 48 8b 6f 10 48 89 fb 48 c7 c7 82 96 d9 a0 8b 55 50 48 8b 75 58 e8 de f5 92 e0 83 7d 50 00 74 09 <0f> 0b 5b 5d 41 5c 41 5d c3 4c 8b 65 00 48 8b 7d 08 49 39 fc 74 05 [...] [16302.231917] Call Trace: [16302.231919] <TASK> [16302.231921] __nf_tables_abort.cold+0x23/0x28 [nf_tables] [16302.231934] nf_tables_abort+0x30/0x50 [nf_tables] [16302.231946] nfnetlink_rcv_batch+0x41a/0x840 [nfnetlink] [16302.231952] ? __nla_validate_parse+0x48/0x190 [16302.231959] nfnetlink_rcv+0x110/0x129 [nfnetlink] [16302.231963] netlink_unicast+0x211/0x340 [16302.231969] netlink_sendmsg+0x21e/0x460 Add nft_set_pipapo_match_destroy() helper function to release the elements in the lookup tables. Stefano Brivio says: "We additionally look for elements pointers in the cloned matching data if priv->dirty is set, because that means that cloned data might point to additional elements we did not commit to the working copy yet (such as the abort path case, but perhaps not limited to it)." Fixes: 3c4287f ("nf_tables: Add set type for arbitrary concatenation of ranges") Reviewed-by: Stefano Brivio <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2
pushed a commit
to ammarfaizi2/linux-fork
that referenced
this pull request
Jul 12, 2022
commit 9827a0e upstream. New elements that reside in the clone are not released in case that the transaction is aborted. [16302.231754] ------------[ cut here ]------------ [16302.231756] WARNING: CPU: 0 PID: 100509 at net/netfilter/nf_tables_api.c:1864 nf_tables_chain_destroy+0x26/0x127 [nf_tables] [...] [16302.231882] CPU: 0 PID: 100509 Comm: nft Tainted: G W 5.19.0-rc3+ torvalds#155 [...] [16302.231887] RIP: 0010:nf_tables_chain_destroy+0x26/0x127 [nf_tables] [16302.231899] Code: f3 fe ff ff 41 55 41 54 55 53 48 8b 6f 10 48 89 fb 48 c7 c7 82 96 d9 a0 8b 55 50 48 8b 75 58 e8 de f5 92 e0 83 7d 50 00 74 09 <0f> 0b 5b 5d 41 5c 41 5d c3 4c 8b 65 00 48 8b 7d 08 49 39 fc 74 05 [...] [16302.231917] Call Trace: [16302.231919] <TASK> [16302.231921] __nf_tables_abort.cold+0x23/0x28 [nf_tables] [16302.231934] nf_tables_abort+0x30/0x50 [nf_tables] [16302.231946] nfnetlink_rcv_batch+0x41a/0x840 [nfnetlink] [16302.231952] ? __nla_validate_parse+0x48/0x190 [16302.231959] nfnetlink_rcv+0x110/0x129 [nfnetlink] [16302.231963] netlink_unicast+0x211/0x340 [16302.231969] netlink_sendmsg+0x21e/0x460 Add nft_set_pipapo_match_destroy() helper function to release the elements in the lookup tables. Stefano Brivio says: "We additionally look for elements pointers in the cloned matching data if priv->dirty is set, because that means that cloned data might point to additional elements we did not commit to the working copy yet (such as the abort path case, but perhaps not limited to it)." Fixes: 3c4287f ("nf_tables: Add set type for arbitrary concatenation of ranges") Reviewed-by: Stefano Brivio <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2
pushed a commit
to ammarfaizi2/linux-fork
that referenced
this pull request
Jul 12, 2022
commit 9827a0e upstream. New elements that reside in the clone are not released in case that the transaction is aborted. [16302.231754] ------------[ cut here ]------------ [16302.231756] WARNING: CPU: 0 PID: 100509 at net/netfilter/nf_tables_api.c:1864 nf_tables_chain_destroy+0x26/0x127 [nf_tables] [...] [16302.231882] CPU: 0 PID: 100509 Comm: nft Tainted: G W 5.19.0-rc3+ torvalds#155 [...] [16302.231887] RIP: 0010:nf_tables_chain_destroy+0x26/0x127 [nf_tables] [16302.231899] Code: f3 fe ff ff 41 55 41 54 55 53 48 8b 6f 10 48 89 fb 48 c7 c7 82 96 d9 a0 8b 55 50 48 8b 75 58 e8 de f5 92 e0 83 7d 50 00 74 09 <0f> 0b 5b 5d 41 5c 41 5d c3 4c 8b 65 00 48 8b 7d 08 49 39 fc 74 05 [...] [16302.231917] Call Trace: [16302.231919] <TASK> [16302.231921] __nf_tables_abort.cold+0x23/0x28 [nf_tables] [16302.231934] nf_tables_abort+0x30/0x50 [nf_tables] [16302.231946] nfnetlink_rcv_batch+0x41a/0x840 [nfnetlink] [16302.231952] ? __nla_validate_parse+0x48/0x190 [16302.231959] nfnetlink_rcv+0x110/0x129 [nfnetlink] [16302.231963] netlink_unicast+0x211/0x340 [16302.231969] netlink_sendmsg+0x21e/0x460 Add nft_set_pipapo_match_destroy() helper function to release the elements in the lookup tables. Stefano Brivio says: "We additionally look for elements pointers in the cloned matching data if priv->dirty is set, because that means that cloned data might point to additional elements we did not commit to the working copy yet (such as the abort path case, but perhaps not limited to it)." Fixes: 3c4287f ("nf_tables: Add set type for arbitrary concatenation of ranges") Reviewed-by: Stefano Brivio <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2
pushed a commit
to ammarfaizi2/linux-fork
that referenced
this pull request
Jul 12, 2022
commit 9827a0e upstream. New elements that reside in the clone are not released in case that the transaction is aborted. [16302.231754] ------------[ cut here ]------------ [16302.231756] WARNING: CPU: 0 PID: 100509 at net/netfilter/nf_tables_api.c:1864 nf_tables_chain_destroy+0x26/0x127 [nf_tables] [...] [16302.231882] CPU: 0 PID: 100509 Comm: nft Tainted: G W 5.19.0-rc3+ torvalds#155 [...] [16302.231887] RIP: 0010:nf_tables_chain_destroy+0x26/0x127 [nf_tables] [16302.231899] Code: f3 fe ff ff 41 55 41 54 55 53 48 8b 6f 10 48 89 fb 48 c7 c7 82 96 d9 a0 8b 55 50 48 8b 75 58 e8 de f5 92 e0 83 7d 50 00 74 09 <0f> 0b 5b 5d 41 5c 41 5d c3 4c 8b 65 00 48 8b 7d 08 49 39 fc 74 05 [...] [16302.231917] Call Trace: [16302.231919] <TASK> [16302.231921] __nf_tables_abort.cold+0x23/0x28 [nf_tables] [16302.231934] nf_tables_abort+0x30/0x50 [nf_tables] [16302.231946] nfnetlink_rcv_batch+0x41a/0x840 [nfnetlink] [16302.231952] ? __nla_validate_parse+0x48/0x190 [16302.231959] nfnetlink_rcv+0x110/0x129 [nfnetlink] [16302.231963] netlink_unicast+0x211/0x340 [16302.231969] netlink_sendmsg+0x21e/0x460 Add nft_set_pipapo_match_destroy() helper function to release the elements in the lookup tables. Stefano Brivio says: "We additionally look for elements pointers in the cloned matching data if priv->dirty is set, because that means that cloned data might point to additional elements we did not commit to the working copy yet (such as the abort path case, but perhaps not limited to it)." Fixes: 3c4287f ("nf_tables: Add set type for arbitrary concatenation of ranges") Reviewed-by: Stefano Brivio <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2
pushed a commit
to ammarfaizi2/linux-fork
that referenced
this pull request
Jul 12, 2022
commit 9827a0e upstream. New elements that reside in the clone are not released in case that the transaction is aborted. [16302.231754] ------------[ cut here ]------------ [16302.231756] WARNING: CPU: 0 PID: 100509 at net/netfilter/nf_tables_api.c:1864 nf_tables_chain_destroy+0x26/0x127 [nf_tables] [...] [16302.231882] CPU: 0 PID: 100509 Comm: nft Tainted: G W 5.19.0-rc3+ torvalds#155 [...] [16302.231887] RIP: 0010:nf_tables_chain_destroy+0x26/0x127 [nf_tables] [16302.231899] Code: f3 fe ff ff 41 55 41 54 55 53 48 8b 6f 10 48 89 fb 48 c7 c7 82 96 d9 a0 8b 55 50 48 8b 75 58 e8 de f5 92 e0 83 7d 50 00 74 09 <0f> 0b 5b 5d 41 5c 41 5d c3 4c 8b 65 00 48 8b 7d 08 49 39 fc 74 05 [...] [16302.231917] Call Trace: [16302.231919] <TASK> [16302.231921] __nf_tables_abort.cold+0x23/0x28 [nf_tables] [16302.231934] nf_tables_abort+0x30/0x50 [nf_tables] [16302.231946] nfnetlink_rcv_batch+0x41a/0x840 [nfnetlink] [16302.231952] ? __nla_validate_parse+0x48/0x190 [16302.231959] nfnetlink_rcv+0x110/0x129 [nfnetlink] [16302.231963] netlink_unicast+0x211/0x340 [16302.231969] netlink_sendmsg+0x21e/0x460 Add nft_set_pipapo_match_destroy() helper function to release the elements in the lookup tables. Stefano Brivio says: "We additionally look for elements pointers in the cloned matching data if priv->dirty is set, because that means that cloned data might point to additional elements we did not commit to the working copy yet (such as the abort path case, but perhaps not limited to it)." Fixes: 3c4287f ("nf_tables: Add set type for arbitrary concatenation of ranges") Reviewed-by: Stefano Brivio <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
ammarfaizi2
pushed a commit
to ammarfaizi2/linux-fork
that referenced
this pull request
Jul 12, 2022
commit 9827a0e upstream. New elements that reside in the clone are not released in case that the transaction is aborted. [16302.231754] ------------[ cut here ]------------ [16302.231756] WARNING: CPU: 0 PID: 100509 at net/netfilter/nf_tables_api.c:1864 nf_tables_chain_destroy+0x26/0x127 [nf_tables] [...] [16302.231882] CPU: 0 PID: 100509 Comm: nft Tainted: G W 5.19.0-rc3+ torvalds#155 [...] [16302.231887] RIP: 0010:nf_tables_chain_destroy+0x26/0x127 [nf_tables] [16302.231899] Code: f3 fe ff ff 41 55 41 54 55 53 48 8b 6f 10 48 89 fb 48 c7 c7 82 96 d9 a0 8b 55 50 48 8b 75 58 e8 de f5 92 e0 83 7d 50 00 74 09 <0f> 0b 5b 5d 41 5c 41 5d c3 4c 8b 65 00 48 8b 7d 08 49 39 fc 74 05 [...] [16302.231917] Call Trace: [16302.231919] <TASK> [16302.231921] __nf_tables_abort.cold+0x23/0x28 [nf_tables] [16302.231934] nf_tables_abort+0x30/0x50 [nf_tables] [16302.231946] nfnetlink_rcv_batch+0x41a/0x840 [nfnetlink] [16302.231952] ? __nla_validate_parse+0x48/0x190 [16302.231959] nfnetlink_rcv+0x110/0x129 [nfnetlink] [16302.231963] netlink_unicast+0x211/0x340 [16302.231969] netlink_sendmsg+0x21e/0x460 Add nft_set_pipapo_match_destroy() helper function to release the elements in the lookup tables. Stefano Brivio says: "We additionally look for elements pointers in the cloned matching data if priv->dirty is set, because that means that cloned data might point to additional elements we did not commit to the working copy yet (such as the abort path case, but perhaps not limited to it)." Fixes: 3c4287f ("nf_tables: Add set type for arbitrary concatenation of ranges") Reviewed-by: Stefano Brivio <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
larsclausen
pushed a commit
to larsclausen/linux
that referenced
this pull request
Jul 18, 2022
New elements that reside in the clone are not released in case that the transaction is aborted. [16302.231754] ------------[ cut here ]------------ [16302.231756] WARNING: CPU: 0 PID: 100509 at net/netfilter/nf_tables_api.c:1864 nf_tables_chain_destroy+0x26/0x127 [nf_tables] [...] [16302.231882] CPU: 0 PID: 100509 Comm: nft Tainted: G W 5.19.0-rc3+ torvalds#155 [...] [16302.231887] RIP: 0010:nf_tables_chain_destroy+0x26/0x127 [nf_tables] [16302.231899] Code: f3 fe ff ff 41 55 41 54 55 53 48 8b 6f 10 48 89 fb 48 c7 c7 82 96 d9 a0 8b 55 50 48 8b 75 58 e8 de f5 92 e0 83 7d 50 00 74 09 <0f> 0b 5b 5d 41 5c 41 5d c3 4c 8b 65 00 48 8b 7d 08 49 39 fc 74 05 [...] [16302.231917] Call Trace: [16302.231919] <TASK> [16302.231921] __nf_tables_abort.cold+0x23/0x28 [nf_tables] [16302.231934] nf_tables_abort+0x30/0x50 [nf_tables] [16302.231946] nfnetlink_rcv_batch+0x41a/0x840 [nfnetlink] [16302.231952] ? __nla_validate_parse+0x48/0x190 [16302.231959] nfnetlink_rcv+0x110/0x129 [nfnetlink] [16302.231963] netlink_unicast+0x211/0x340 [16302.231969] netlink_sendmsg+0x21e/0x460 Add nft_set_pipapo_match_destroy() helper function to release the elements in the lookup tables. Stefano Brivio says: "We additionally look for elements pointers in the cloned matching data if priv->dirty is set, because that means that cloned data might point to additional elements we did not commit to the working copy yet (such as the abort path case, but perhaps not limited to it)." Fixes: 3c4287f ("nf_tables: Add set type for arbitrary concatenation of ranges") Reviewed-by: Stefano Brivio <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
morbidrsa
pushed a commit
to morbidrsa/linux
that referenced
this pull request
Aug 4, 2022
New elements that reside in the clone are not released in case that the transaction is aborted. [16302.231754] ------------[ cut here ]------------ [16302.231756] WARNING: CPU: 0 PID: 100509 at net/netfilter/nf_tables_api.c:1864 nf_tables_chain_destroy+0x26/0x127 [nf_tables] [...] [16302.231882] CPU: 0 PID: 100509 Comm: nft Tainted: G W 5.19.0-rc3+ torvalds#155 [...] [16302.231887] RIP: 0010:nf_tables_chain_destroy+0x26/0x127 [nf_tables] [16302.231899] Code: f3 fe ff ff 41 55 41 54 55 53 48 8b 6f 10 48 89 fb 48 c7 c7 82 96 d9 a0 8b 55 50 48 8b 75 58 e8 de f5 92 e0 83 7d 50 00 74 09 <0f> 0b 5b 5d 41 5c 41 5d c3 4c 8b 65 00 48 8b 7d 08 49 39 fc 74 05 [...] [16302.231917] Call Trace: [16302.231919] <TASK> [16302.231921] __nf_tables_abort.cold+0x23/0x28 [nf_tables] [16302.231934] nf_tables_abort+0x30/0x50 [nf_tables] [16302.231946] nfnetlink_rcv_batch+0x41a/0x840 [nfnetlink] [16302.231952] ? __nla_validate_parse+0x48/0x190 [16302.231959] nfnetlink_rcv+0x110/0x129 [nfnetlink] [16302.231963] netlink_unicast+0x211/0x340 [16302.231969] netlink_sendmsg+0x21e/0x460 Add nft_set_pipapo_match_destroy() helper function to release the elements in the lookup tables. Stefano Brivio says: "We additionally look for elements pointers in the cloned matching data if priv->dirty is set, because that means that cloned data might point to additional elements we did not commit to the working copy yet (such as the abort path case, but perhaps not limited to it)." Fixes: 3c4287f ("nf_tables: Add set type for arbitrary concatenation of ranges") Reviewed-by: Stefano Brivio <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
akiernan
pushed a commit
to zuma-array/linux
that referenced
this pull request
Nov 3, 2022
PD#150094: driver defect clean up: torvalds#32 torvalds#86 torvalds#90 torvalds#92 torvalds#97 torvalds#101 torvalds#103 torvalds#152 torvalds#155 torvalds#157~torvalds#158 torvalds#164 torvalds#167 torvalds#169~torvalds#179 torvalds#187~torvalds#191 torvalds#193~torvalds#199 torvalds#201~torvalds#210 torvalds#212~torvalds#213 torvalds#316~torvalds#319 torvalds#385 torvalds#572 torvalds#693~torvalds#694 torvalds#696~torvalds#697 Change-Id: I9669e5c0d717ee2287faf57a271ff27692039802 Signed-off-by: Guosong Zhou <[email protected]>
akiernan
pushed a commit
to zuma-array/linux
that referenced
this pull request
Nov 4, 2022
PD#150094: driver defect clean up: torvalds#32 torvalds#86 torvalds#90 torvalds#92 torvalds#97 torvalds#101 torvalds#103 torvalds#152 torvalds#155 torvalds#157~torvalds#158 torvalds#164 torvalds#167 torvalds#169~torvalds#179 torvalds#187~torvalds#191 torvalds#193~torvalds#199 torvalds#201~torvalds#210 torvalds#212~torvalds#213 torvalds#316~torvalds#319 torvalds#385 torvalds#572 torvalds#693~torvalds#694 torvalds#696~torvalds#697 Change-Id: I9669e5c0d717ee2287faf57a271ff27692039802 Signed-off-by: Guosong Zhou <[email protected]>
gatieme
pushed a commit
to gatieme/linux
that referenced
this pull request
Nov 24, 2022
ANBZ: torvalds#155 commit d5a9a8c upstream. Currently, if a CPU has more than 10,000 callbacks pending, it will increase rdp->blimit to LONG_MAX. If you are lucky, LONG_MAX is only about two billion, but this is still a bit too many callbacks to invoke back-to-back while otherwise ignoring the world. This commit therefore sets a maximum limit of DEFAULT_MAX_RCU_BLIMIT, which is set to 10,000, for rdp->blimit. Reported-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]> Signed-off-by: Guanghui Feng <[email protected]> Reviewed-by: Xunlei Pang <[email protected]>
mj22226
pushed a commit
to mj22226/linux
that referenced
this pull request
Jul 30, 2023
The name, rk3566-radxa-cm3-sodimm-io.dtb, is old dtb name. Add this to maintain compatibility with existing bootloaders. Signed-off-by: Stephen Chen <[email protected]>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
Sep 5, 2023
when using __drm_kunit_helper_alloc_drm_device() the driver may be dereferenced by device-managed resources up until the device is freed, which is typically later than the kunit-managed resource code frees it. Fix this by simply make the driver device-managed as well. Related KASAN message: [55272.551542] ================================================================== [55272.551551] BUG: KASAN: slab-use-after-free in drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551603] Read of size 8 at addr ffff888127502828 by task kunit_try_catch/10353 [55272.551612] CPU: 4 PID: 10353 Comm: kunit_try_catch Tainted: G U N 6.5.0-rc7+ torvalds#155 [55272.551620] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021 [55272.551626] Call Trace: [55272.551629] <TASK> [55272.551633] dump_stack_lvl+0x57/0x90 [55272.551639] print_report+0xcf/0x630 [55272.551645] ? _raw_spin_lock_irqsave+0x5f/0x70 [55272.551652] ? drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551694] kasan_report+0xd7/0x110 [55272.551699] ? drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551742] drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551783] devres_release_all+0x15d/0x1f0 [55272.551790] ? __pfx_devres_release_all+0x10/0x10 [55272.551797] device_unbind_cleanup+0x16/0x1a0 [55272.551802] device_release_driver_internal+0x3e5/0x540 [55272.551808] ? kobject_put+0x5d/0x4b0 [55272.551814] bus_remove_device+0x1f1/0x3f0 [55272.551819] device_del+0x342/0x910 [55272.551826] ? __pfx_device_del+0x10/0x10 [55272.551830] ? lock_release+0x339/0x5e0 [55272.551836] ? kunit_remove_resource+0x128/0x290 [kunit] [55272.551845] ? __pfx_lock_release+0x10/0x10 [55272.551851] platform_device_del.part.0+0x1f/0x1e0 [55272.551856] ? _raw_spin_unlock_irqrestore+0x30/0x60 [55272.551863] kunit_remove_resource+0x195/0x290 [kunit] [55272.551871] ? _raw_spin_unlock_irqrestore+0x30/0x60 [55272.551877] kunit_cleanup+0x78/0x120 [kunit] [55272.551885] ? __kthread_parkme+0xc1/0x1f0 [55272.551891] ? __pfx_kunit_try_run_case_cleanup+0x10/0x10 [kunit] [55272.551900] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit] [55272.551909] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.551919] kthread+0x2e7/0x3c0 [55272.551924] ? __pfx_kthread+0x10/0x10 [55272.551929] ret_from_fork+0x2d/0x70 [55272.551935] ? __pfx_kthread+0x10/0x10 [55272.551940] ret_from_fork_asm+0x1b/0x30 [55272.551948] </TASK> [55272.551953] Allocated by task 10351: [55272.551956] kasan_save_stack+0x1c/0x40 [55272.551962] kasan_set_track+0x21/0x30 [55272.551966] __kasan_kmalloc+0x8b/0x90 [55272.551970] __kmalloc+0x5e/0x160 [55272.551976] kunit_kmalloc_array+0x1c/0x50 [kunit] [55272.551984] drm_exec_test_init+0xfa/0x2c0 [drm_exec_test] [55272.551991] kunit_try_run_case+0xdd/0x250 [kunit] [55272.551999] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.552008] kthread+0x2e7/0x3c0 [55272.552012] ret_from_fork+0x2d/0x70 [55272.552017] ret_from_fork_asm+0x1b/0x30 [55272.552024] Freed by task 10353: [55272.552027] kasan_save_stack+0x1c/0x40 [55272.552032] kasan_set_track+0x21/0x30 [55272.552036] kasan_save_free_info+0x27/0x40 [55272.552041] __kasan_slab_free+0x106/0x180 [55272.552046] slab_free_freelist_hook+0xb3/0x160 [55272.552051] __kmem_cache_free+0xb2/0x290 [55272.552056] kunit_remove_resource+0x195/0x290 [kunit] [55272.552064] kunit_cleanup+0x78/0x120 [kunit] [55272.552072] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.552080] kthread+0x2e7/0x3c0 [55272.552085] ret_from_fork+0x2d/0x70 [55272.552089] ret_from_fork_asm+0x1b/0x30 [55272.552096] The buggy address belongs to the object at ffff888127502800 which belongs to the cache kmalloc-512 of size 512 [55272.552105] The buggy address is located 40 bytes inside of freed 512-byte region [ffff888127502800, ffff888127502a00) [55272.552115] The buggy address belongs to the physical page: [55272.552119] page:00000000af6c70ff refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x127500 [55272.552127] head:00000000af6c70ff order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [55272.552133] anon flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff) [55272.552141] page_type: 0xffffffff() [55272.552145] raw: 0017ffffc0010200 ffff888100042c80 0000000000000000 dead000000000001 [55272.552152] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 [55272.552157] page dumped because: kasan: bad access detected [55272.552163] Memory state around the buggy address: [55272.552167] ffff888127502700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [55272.552173] ffff888127502780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [55272.552178] >ffff888127502800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [55272.552184] ^ [55272.552187] ffff888127502880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [55272.552193] ffff888127502900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [55272.552198] ================================================================== [55272.552203] Disabling lock debugging due to kernel taint Cc: Maarten Lankhorst <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Signed-off-by: Thomas Hellström <[email protected]>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
Sep 5, 2023
If *any* object of a certain WW mutex class is locked, lockdep will consider *all* mutexes of that class as locked. Also the lock allocation tracking code will apparently register only the address of the first mutex locked in a sequence. This has the odd consequence that if that first mutex is unlocked and its memory then freed, the lock alloc tracking code will assume that memory is freed with a held lock in there. For now, work around that for drm_exec by releasing the first grabbed object lock last. Related lock alloc tracking warning: [ 322.660067] ========================= [ 322.660070] WARNING: held lock freed! [ 322.660074] 6.5.0-rc7+ torvalds#155 Tainted: G U N [ 322.660078] ------------------------- [ 322.660081] kunit_try_catch/4981 is freeing memory ffff888112adc000-ffff888112adc3ff, with a lock still held there! [ 322.660089] ffff888112adc1a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x11a/0x600 [drm_exec] [ 322.660104] 2 locks held by kunit_try_catch/4981: [ 322.660108] #0: ffffc9000343fe18 (reservation_ww_class_acquire){+.+.}-{0:0}, at: test_early_put+0x22f/0x490 [drm_exec_test] [ 322.660123] #1: ffff888112adc1a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x11a/0x600 [drm_exec] [ 322.660135] stack backtrace: [ 322.660139] CPU: 7 PID: 4981 Comm: kunit_try_catch Tainted: G U N 6.5.0-rc7+ torvalds#155 [ 322.660146] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021 [ 322.660152] Call Trace: [ 322.660155] <TASK> [ 322.660158] dump_stack_lvl+0x57/0x90 [ 322.660164] debug_check_no_locks_freed+0x20b/0x2b0 [ 322.660172] slab_free_freelist_hook+0xa1/0x160 [ 322.660179] ? drm_exec_unlock_all+0x168/0x2a0 [drm_exec] [ 322.660186] __kmem_cache_free+0xb2/0x290 [ 322.660192] drm_exec_unlock_all+0x168/0x2a0 [drm_exec] [ 322.660200] drm_exec_fini+0xf/0x1c0 [drm_exec] [ 322.660206] test_early_put+0x289/0x490 [drm_exec_test] [ 322.660215] ? __pfx_test_early_put+0x10/0x10 [drm_exec_test] [ 322.660222] ? __kasan_check_byte+0xf/0x40 [ 322.660227] ? __ksize+0x63/0x140 [ 322.660233] ? drmm_add_final_kfree+0x3e/0xa0 [drm] [ 322.660289] ? _raw_spin_unlock_irqrestore+0x30/0x60 [ 322.660294] ? lockdep_hardirqs_on+0x7d/0x100 [ 322.660301] ? __pfx_kunit_try_run_case+0x10/0x10 [kunit] [ 322.660310] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit] [ 322.660319] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [ 322.660328] kthread+0x2e7/0x3c0 [ 322.660334] ? __pfx_kthread+0x10/0x10 [ 322.660339] ret_from_fork+0x2d/0x70 [ 322.660345] ? __pfx_kthread+0x10/0x10 [ 322.660349] ret_from_fork_asm+0x1b/0x30 [ 322.660358] </TASK> [ 322.660818] ok 8 test_early_put Cc: Christian König <[email protected]> Cc: Boris Brezillon <[email protected]> Cc: Danilo Krummrich <[email protected]> Cc: [email protected] Signed-off-by: Thomas Hellström <[email protected]>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
Sep 6, 2023
when using __drm_kunit_helper_alloc_drm_device() the driver may be dereferenced by device-managed resources up until the device is freed, which is typically later than the kunit-managed resource code frees it. Fix this by simply make the driver device-managed as well. v2: - Update commit message, add Fixes: tag and Cc stable. Related KASAN message: [55272.551542] ================================================================== [55272.551551] BUG: KASAN: slab-use-after-free in drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551603] Read of size 8 at addr ffff888127502828 by task kunit_try_catch/10353 [55272.551612] CPU: 4 PID: 10353 Comm: kunit_try_catch Tainted: G U N 6.5.0-rc7+ torvalds#155 [55272.551620] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021 [55272.551626] Call Trace: [55272.551629] <TASK> [55272.551633] dump_stack_lvl+0x57/0x90 [55272.551639] print_report+0xcf/0x630 [55272.551645] ? _raw_spin_lock_irqsave+0x5f/0x70 [55272.551652] ? drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551694] kasan_report+0xd7/0x110 [55272.551699] ? drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551742] drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551783] devres_release_all+0x15d/0x1f0 [55272.551790] ? __pfx_devres_release_all+0x10/0x10 [55272.551797] device_unbind_cleanup+0x16/0x1a0 [55272.551802] device_release_driver_internal+0x3e5/0x540 [55272.551808] ? kobject_put+0x5d/0x4b0 [55272.551814] bus_remove_device+0x1f1/0x3f0 [55272.551819] device_del+0x342/0x910 [55272.551826] ? __pfx_device_del+0x10/0x10 [55272.551830] ? lock_release+0x339/0x5e0 [55272.551836] ? kunit_remove_resource+0x128/0x290 [kunit] [55272.551845] ? __pfx_lock_release+0x10/0x10 [55272.551851] platform_device_del.part.0+0x1f/0x1e0 [55272.551856] ? _raw_spin_unlock_irqrestore+0x30/0x60 [55272.551863] kunit_remove_resource+0x195/0x290 [kunit] [55272.551871] ? _raw_spin_unlock_irqrestore+0x30/0x60 [55272.551877] kunit_cleanup+0x78/0x120 [kunit] [55272.551885] ? __kthread_parkme+0xc1/0x1f0 [55272.551891] ? __pfx_kunit_try_run_case_cleanup+0x10/0x10 [kunit] [55272.551900] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit] [55272.551909] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.551919] kthread+0x2e7/0x3c0 [55272.551924] ? __pfx_kthread+0x10/0x10 [55272.551929] ret_from_fork+0x2d/0x70 [55272.551935] ? __pfx_kthread+0x10/0x10 [55272.551940] ret_from_fork_asm+0x1b/0x30 [55272.551948] </TASK> [55272.551953] Allocated by task 10351: [55272.551956] kasan_save_stack+0x1c/0x40 [55272.551962] kasan_set_track+0x21/0x30 [55272.551966] __kasan_kmalloc+0x8b/0x90 [55272.551970] __kmalloc+0x5e/0x160 [55272.551976] kunit_kmalloc_array+0x1c/0x50 [kunit] [55272.551984] drm_exec_test_init+0xfa/0x2c0 [drm_exec_test] [55272.551991] kunit_try_run_case+0xdd/0x250 [kunit] [55272.551999] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.552008] kthread+0x2e7/0x3c0 [55272.552012] ret_from_fork+0x2d/0x70 [55272.552017] ret_from_fork_asm+0x1b/0x30 [55272.552024] Freed by task 10353: [55272.552027] kasan_save_stack+0x1c/0x40 [55272.552032] kasan_set_track+0x21/0x30 [55272.552036] kasan_save_free_info+0x27/0x40 [55272.552041] __kasan_slab_free+0x106/0x180 [55272.552046] slab_free_freelist_hook+0xb3/0x160 [55272.552051] __kmem_cache_free+0xb2/0x290 [55272.552056] kunit_remove_resource+0x195/0x290 [kunit] [55272.552064] kunit_cleanup+0x78/0x120 [kunit] [55272.552072] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.552080] kthread+0x2e7/0x3c0 [55272.552085] ret_from_fork+0x2d/0x70 [55272.552089] ret_from_fork_asm+0x1b/0x30 [55272.552096] The buggy address belongs to the object at ffff888127502800 which belongs to the cache kmalloc-512 of size 512 [55272.552105] The buggy address is located 40 bytes inside of freed 512-byte region [ffff888127502800, ffff888127502a00) [55272.552115] The buggy address belongs to the physical page: [55272.552119] page:00000000af6c70ff refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x127500 [55272.552127] head:00000000af6c70ff order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [55272.552133] anon flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff) [55272.552141] page_type: 0xffffffff() [55272.552145] raw: 0017ffffc0010200 ffff888100042c80 0000000000000000 dead000000000001 [55272.552152] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 [55272.552157] page dumped because: kasan: bad access detected [55272.552163] Memory state around the buggy address: [55272.552167] ffff888127502700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [55272.552173] ffff888127502780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [55272.552178] >ffff888127502800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [55272.552184] ^ [55272.552187] ffff888127502880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [55272.552193] ffff888127502900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [55272.552198] ================================================================== [55272.552203] Disabling lock debugging due to kernel taint Cc: Maarten Lankhorst <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Cc: <[email protected]> # v6.3+ Fixes: d987803 ("drm/tests: helpers: Allow to pass a custom drm_driver") Signed-off-by: Thomas Hellström <[email protected]>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
Sep 6, 2023
If *any* object of a certain WW mutex class is locked, lockdep will consider *all* mutexes of that class as locked. Also the lock allocation tracking code will apparently register only the address of the first mutex of a given class locked in a sequence. This has the odd consequence that if that first mutex is unlocked while other mutexes of the same class remain locked and then its memory then freed, the lock alloc tracking code will incorrectly assume that memory is freed with a held lock in there. For now, work around that for drm_exec by releasing the first grabbed object lock last. v2: - Fix a typo (Danilo Krummrich) - Reword the commit message a bit. - Add a Fixes: tag Related lock alloc tracking warning: [ 322.660067] ========================= [ 322.660070] WARNING: held lock freed! [ 322.660074] 6.5.0-rc7+ torvalds#155 Tainted: G U N [ 322.660078] ------------------------- [ 322.660081] kunit_try_catch/4981 is freeing memory ffff888112adc000-ffff888112adc3ff, with a lock still held there! [ 322.660089] ffff888112adc1a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x11a/0x600 [drm_exec] [ 322.660104] 2 locks held by kunit_try_catch/4981: [ 322.660108] #0: ffffc9000343fe18 (reservation_ww_class_acquire){+.+.}-{0:0}, at: test_early_put+0x22f/0x490 [drm_exec_test] [ 322.660123] #1: ffff888112adc1a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x11a/0x600 [drm_exec] [ 322.660135] stack backtrace: [ 322.660139] CPU: 7 PID: 4981 Comm: kunit_try_catch Tainted: G U N 6.5.0-rc7+ torvalds#155 [ 322.660146] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021 [ 322.660152] Call Trace: [ 322.660155] <TASK> [ 322.660158] dump_stack_lvl+0x57/0x90 [ 322.660164] debug_check_no_locks_freed+0x20b/0x2b0 [ 322.660172] slab_free_freelist_hook+0xa1/0x160 [ 322.660179] ? drm_exec_unlock_all+0x168/0x2a0 [drm_exec] [ 322.660186] __kmem_cache_free+0xb2/0x290 [ 322.660192] drm_exec_unlock_all+0x168/0x2a0 [drm_exec] [ 322.660200] drm_exec_fini+0xf/0x1c0 [drm_exec] [ 322.660206] test_early_put+0x289/0x490 [drm_exec_test] [ 322.660215] ? __pfx_test_early_put+0x10/0x10 [drm_exec_test] [ 322.660222] ? __kasan_check_byte+0xf/0x40 [ 322.660227] ? __ksize+0x63/0x140 [ 322.660233] ? drmm_add_final_kfree+0x3e/0xa0 [drm] [ 322.660289] ? _raw_spin_unlock_irqrestore+0x30/0x60 [ 322.660294] ? lockdep_hardirqs_on+0x7d/0x100 [ 322.660301] ? __pfx_kunit_try_run_case+0x10/0x10 [kunit] [ 322.660310] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit] [ 322.660319] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [ 322.660328] kthread+0x2e7/0x3c0 [ 322.660334] ? __pfx_kthread+0x10/0x10 [ 322.660339] ret_from_fork+0x2d/0x70 [ 322.660345] ? __pfx_kthread+0x10/0x10 [ 322.660349] ret_from_fork_asm+0x1b/0x30 [ 322.660358] </TASK> [ 322.660818] ok 8 test_early_put Cc: Christian König <[email protected]> Cc: Boris Brezillon <[email protected]> Cc: Danilo Krummrich <[email protected]> Cc: [email protected] Fixes: 0959321 ("drm: execution context for GEM buffers v7") Signed-off-by: Thomas Hellström <[email protected]> Reviewed-by: Boris Brezillon <[email protected]> Reviewed-by: Danilo Krummrich <[email protected]> Reviewed-by: Christian König <[email protected]>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
Sep 7, 2023
If *any* object of a certain WW mutex class is locked, lockdep will consider *all* mutexes of that class as locked. Also the lock allocation tracking code will apparently register only the address of the first mutex of a given class locked in a sequence. This has the odd consequence that if that first mutex is unlocked while other mutexes of the same class remain locked and then its memory then freed, the lock alloc tracking code will incorrectly assume that memory is freed with a held lock in there. For now, work around that for drm_exec by releasing the first grabbed object lock last. v2: - Fix a typo (Danilo Krummrich) - Reword the commit message a bit. - Add a Fixes: tag Related lock alloc tracking warning: [ 322.660067] ========================= [ 322.660070] WARNING: held lock freed! [ 322.660074] 6.5.0-rc7+ torvalds#155 Tainted: G U N [ 322.660078] ------------------------- [ 322.660081] kunit_try_catch/4981 is freeing memory ffff888112adc000-ffff888112adc3ff, with a lock still held there! [ 322.660089] ffff888112adc1a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x11a/0x600 [drm_exec] [ 322.660104] 2 locks held by kunit_try_catch/4981: [ 322.660108] #0: ffffc9000343fe18 (reservation_ww_class_acquire){+.+.}-{0:0}, at: test_early_put+0x22f/0x490 [drm_exec_test] [ 322.660123] #1: ffff888112adc1a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x11a/0x600 [drm_exec] [ 322.660135] stack backtrace: [ 322.660139] CPU: 7 PID: 4981 Comm: kunit_try_catch Tainted: G U N 6.5.0-rc7+ torvalds#155 [ 322.660146] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021 [ 322.660152] Call Trace: [ 322.660155] <TASK> [ 322.660158] dump_stack_lvl+0x57/0x90 [ 322.660164] debug_check_no_locks_freed+0x20b/0x2b0 [ 322.660172] slab_free_freelist_hook+0xa1/0x160 [ 322.660179] ? drm_exec_unlock_all+0x168/0x2a0 [drm_exec] [ 322.660186] __kmem_cache_free+0xb2/0x290 [ 322.660192] drm_exec_unlock_all+0x168/0x2a0 [drm_exec] [ 322.660200] drm_exec_fini+0xf/0x1c0 [drm_exec] [ 322.660206] test_early_put+0x289/0x490 [drm_exec_test] [ 322.660215] ? __pfx_test_early_put+0x10/0x10 [drm_exec_test] [ 322.660222] ? __kasan_check_byte+0xf/0x40 [ 322.660227] ? __ksize+0x63/0x140 [ 322.660233] ? drmm_add_final_kfree+0x3e/0xa0 [drm] [ 322.660289] ? _raw_spin_unlock_irqrestore+0x30/0x60 [ 322.660294] ? lockdep_hardirqs_on+0x7d/0x100 [ 322.660301] ? __pfx_kunit_try_run_case+0x10/0x10 [kunit] [ 322.660310] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit] [ 322.660319] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [ 322.660328] kthread+0x2e7/0x3c0 [ 322.660334] ? __pfx_kthread+0x10/0x10 [ 322.660339] ret_from_fork+0x2d/0x70 [ 322.660345] ? __pfx_kthread+0x10/0x10 [ 322.660349] ret_from_fork_asm+0x1b/0x30 [ 322.660358] </TASK> [ 322.660818] ok 8 test_early_put Cc: Christian König <[email protected]> Cc: Boris Brezillon <[email protected]> Cc: Danilo Krummrich <[email protected]> Cc: [email protected] Fixes: 0959321 ("drm: execution context for GEM buffers v7") Signed-off-by: Thomas Hellström <[email protected]> Reviewed-by: Boris Brezillon <[email protected]> Reviewed-by: Danilo Krummrich <[email protected]> Reviewed-by: Christian König <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
Sep 7, 2023
when using __drm_kunit_helper_alloc_drm_device() the driver may be
dereferenced by device-managed resources up until the device is
freed, which is typically later than the kunit-managed resource code
frees it. Fix this by simply make the driver device-managed as well.
In short, the sequence leading to the UAF is as follows:
INIT:
Code allocates a struct device as a kunit-managed resource.
Code allocates a drm driver as a kunit-managed resource.
Code allocates a drm device as a device-managed resource.
EXIT:
Kunit resource cleanup frees the drm driver
Kunit resource cleanup puts the struct device, which starts a
device-managed resource cleanup
device-managed cleanup calls drm_dev_put()
drm_dev_put() dereferences the (now freed) drm driver -> Boom.
Related KASAN message:
[55272.551542] ==================================================================
[55272.551551] BUG: KASAN: slab-use-after-free in drm_dev_put.part.0+0xd4/0xe0 [drm]
[55272.551603] Read of size 8 at addr ffff888127502828 by task kunit_try_catch/10353
[55272.551612] CPU: 4 PID: 10353 Comm: kunit_try_catch Tainted: G U N 6.5.0-rc7+ torvalds#155
[55272.551620] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021
[55272.551626] Call Trace:
[55272.551629] <TASK>
[55272.551633] dump_stack_lvl+0x57/0x90
[55272.551639] print_report+0xcf/0x630
[55272.551645] ? _raw_spin_lock_irqsave+0x5f/0x70
[55272.551652] ? drm_dev_put.part.0+0xd4/0xe0 [drm]
[55272.551694] kasan_report+0xd7/0x110
[55272.551699] ? drm_dev_put.part.0+0xd4/0xe0 [drm]
[55272.551742] drm_dev_put.part.0+0xd4/0xe0 [drm]
[55272.551783] devres_release_all+0x15d/0x1f0
[55272.551790] ? __pfx_devres_release_all+0x10/0x10
[55272.551797] device_unbind_cleanup+0x16/0x1a0
[55272.551802] device_release_driver_internal+0x3e5/0x540
[55272.551808] ? kobject_put+0x5d/0x4b0
[55272.551814] bus_remove_device+0x1f1/0x3f0
[55272.551819] device_del+0x342/0x910
[55272.551826] ? __pfx_device_del+0x10/0x10
[55272.551830] ? lock_release+0x339/0x5e0
[55272.551836] ? kunit_remove_resource+0x128/0x290 [kunit]
[55272.551845] ? __pfx_lock_release+0x10/0x10
[55272.551851] platform_device_del.part.0+0x1f/0x1e0
[55272.551856] ? _raw_spin_unlock_irqrestore+0x30/0x60
[55272.551863] kunit_remove_resource+0x195/0x290 [kunit]
[55272.551871] ? _raw_spin_unlock_irqrestore+0x30/0x60
[55272.551877] kunit_cleanup+0x78/0x120 [kunit]
[55272.551885] ? __kthread_parkme+0xc1/0x1f0
[55272.551891] ? __pfx_kunit_try_run_case_cleanup+0x10/0x10 [kunit]
[55272.551900] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit]
[55272.551909] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit]
[55272.551919] kthread+0x2e7/0x3c0
[55272.551924] ? __pfx_kthread+0x10/0x10
[55272.551929] ret_from_fork+0x2d/0x70
[55272.551935] ? __pfx_kthread+0x10/0x10
[55272.551940] ret_from_fork_asm+0x1b/0x30
[55272.551948] </TASK>
[55272.551953] Allocated by task 10351:
[55272.551956] kasan_save_stack+0x1c/0x40
[55272.551962] kasan_set_track+0x21/0x30
[55272.551966] __kasan_kmalloc+0x8b/0x90
[55272.551970] __kmalloc+0x5e/0x160
[55272.551976] kunit_kmalloc_array+0x1c/0x50 [kunit]
[55272.551984] drm_exec_test_init+0xfa/0x2c0 [drm_exec_test]
[55272.551991] kunit_try_run_case+0xdd/0x250 [kunit]
[55272.551999] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit]
[55272.552008] kthread+0x2e7/0x3c0
[55272.552012] ret_from_fork+0x2d/0x70
[55272.552017] ret_from_fork_asm+0x1b/0x30
[55272.552024] Freed by task 10353:
[55272.552027] kasan_save_stack+0x1c/0x40
[55272.552032] kasan_set_track+0x21/0x30
[55272.552036] kasan_save_free_info+0x27/0x40
[55272.552041] __kasan_slab_free+0x106/0x180
[55272.552046] slab_free_freelist_hook+0xb3/0x160
[55272.552051] __kmem_cache_free+0xb2/0x290
[55272.552056] kunit_remove_resource+0x195/0x290 [kunit]
[55272.552064] kunit_cleanup+0x78/0x120 [kunit]
[55272.552072] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit]
[55272.552080] kthread+0x2e7/0x3c0
[55272.552085] ret_from_fork+0x2d/0x70
[55272.552089] ret_from_fork_asm+0x1b/0x30
[55272.552096] The buggy address belongs to the object at ffff888127502800
which belongs to the cache kmalloc-512 of size 512
[55272.552105] The buggy address is located 40 bytes inside of
freed 512-byte region [ffff888127502800, ffff888127502a00)
[55272.552115] The buggy address belongs to the physical page:
[55272.552119] page:00000000af6c70ff refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x127500
[55272.552127] head:00000000af6c70ff order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[55272.552133] anon flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff)
[55272.552141] page_type: 0xffffffff()
[55272.552145] raw: 0017ffffc0010200 ffff888100042c80 0000000000000000 dead000000000001
[55272.552152] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
[55272.552157] page dumped because: kasan: bad access detected
[55272.552163] Memory state around the buggy address:
[55272.552167] ffff888127502700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[55272.552173] ffff888127502780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[55272.552178] >ffff888127502800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[55272.552184] ^
[55272.552187] ffff888127502880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[55272.552193] ffff888127502900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[55272.552198] ==================================================================
[55272.552203] Disabling lock debugging due to kernel taint
v2:
- Update commit message, add Fixes: tag and Cc stable.
v3:
- Further commit message updates (Maxime Ripard).
Cc: Maarten Lankhorst <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # v6.3+
Fixes: d987803 ("drm/tests: helpers: Allow to pass a custom drm_driver")
Signed-off-by: Thomas Hellström <[email protected]>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
Sep 14, 2023
when using __drm_kunit_helper_alloc_drm_device() the driver may be
dereferenced by device-managed resources up until the device is
freed, which is typically later than the kunit-managed resource code
frees it. Fix this by simply make the driver device-managed as well.
In short, the sequence leading to the UAF is as follows:
INIT:
Code allocates a struct device as a kunit-managed resource.
Code allocates a drm driver as a kunit-managed resource.
Code allocates a drm device as a device-managed resource.
EXIT:
Kunit resource cleanup frees the drm driver
Kunit resource cleanup puts the struct device, which starts a
device-managed resource cleanup
device-managed cleanup calls drm_dev_put()
drm_dev_put() dereferences the (now freed) drm driver -> Boom.
Related KASAN message:
[55272.551542] ==================================================================
[55272.551551] BUG: KASAN: slab-use-after-free in drm_dev_put.part.0+0xd4/0xe0 [drm]
[55272.551603] Read of size 8 at addr ffff888127502828 by task kunit_try_catch/10353
[55272.551612] CPU: 4 PID: 10353 Comm: kunit_try_catch Tainted: G U N 6.5.0-rc7+ torvalds#155
[55272.551620] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021
[55272.551626] Call Trace:
[55272.551629] <TASK>
[55272.551633] dump_stack_lvl+0x57/0x90
[55272.551639] print_report+0xcf/0x630
[55272.551645] ? _raw_spin_lock_irqsave+0x5f/0x70
[55272.551652] ? drm_dev_put.part.0+0xd4/0xe0 [drm]
[55272.551694] kasan_report+0xd7/0x110
[55272.551699] ? drm_dev_put.part.0+0xd4/0xe0 [drm]
[55272.551742] drm_dev_put.part.0+0xd4/0xe0 [drm]
[55272.551783] devres_release_all+0x15d/0x1f0
[55272.551790] ? __pfx_devres_release_all+0x10/0x10
[55272.551797] device_unbind_cleanup+0x16/0x1a0
[55272.551802] device_release_driver_internal+0x3e5/0x540
[55272.551808] ? kobject_put+0x5d/0x4b0
[55272.551814] bus_remove_device+0x1f1/0x3f0
[55272.551819] device_del+0x342/0x910
[55272.551826] ? __pfx_device_del+0x10/0x10
[55272.551830] ? lock_release+0x339/0x5e0
[55272.551836] ? kunit_remove_resource+0x128/0x290 [kunit]
[55272.551845] ? __pfx_lock_release+0x10/0x10
[55272.551851] platform_device_del.part.0+0x1f/0x1e0
[55272.551856] ? _raw_spin_unlock_irqrestore+0x30/0x60
[55272.551863] kunit_remove_resource+0x195/0x290 [kunit]
[55272.551871] ? _raw_spin_unlock_irqrestore+0x30/0x60
[55272.551877] kunit_cleanup+0x78/0x120 [kunit]
[55272.551885] ? __kthread_parkme+0xc1/0x1f0
[55272.551891] ? __pfx_kunit_try_run_case_cleanup+0x10/0x10 [kunit]
[55272.551900] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit]
[55272.551909] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit]
[55272.551919] kthread+0x2e7/0x3c0
[55272.551924] ? __pfx_kthread+0x10/0x10
[55272.551929] ret_from_fork+0x2d/0x70
[55272.551935] ? __pfx_kthread+0x10/0x10
[55272.551940] ret_from_fork_asm+0x1b/0x30
[55272.551948] </TASK>
[55272.551953] Allocated by task 10351:
[55272.551956] kasan_save_stack+0x1c/0x40
[55272.551962] kasan_set_track+0x21/0x30
[55272.551966] __kasan_kmalloc+0x8b/0x90
[55272.551970] __kmalloc+0x5e/0x160
[55272.551976] kunit_kmalloc_array+0x1c/0x50 [kunit]
[55272.551984] drm_exec_test_init+0xfa/0x2c0 [drm_exec_test]
[55272.551991] kunit_try_run_case+0xdd/0x250 [kunit]
[55272.551999] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit]
[55272.552008] kthread+0x2e7/0x3c0
[55272.552012] ret_from_fork+0x2d/0x70
[55272.552017] ret_from_fork_asm+0x1b/0x30
[55272.552024] Freed by task 10353:
[55272.552027] kasan_save_stack+0x1c/0x40
[55272.552032] kasan_set_track+0x21/0x30
[55272.552036] kasan_save_free_info+0x27/0x40
[55272.552041] __kasan_slab_free+0x106/0x180
[55272.552046] slab_free_freelist_hook+0xb3/0x160
[55272.552051] __kmem_cache_free+0xb2/0x290
[55272.552056] kunit_remove_resource+0x195/0x290 [kunit]
[55272.552064] kunit_cleanup+0x78/0x120 [kunit]
[55272.552072] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit]
[55272.552080] kthread+0x2e7/0x3c0
[55272.552085] ret_from_fork+0x2d/0x70
[55272.552089] ret_from_fork_asm+0x1b/0x30
[55272.552096] The buggy address belongs to the object at ffff888127502800
which belongs to the cache kmalloc-512 of size 512
[55272.552105] The buggy address is located 40 bytes inside of
freed 512-byte region [ffff888127502800, ffff888127502a00)
[55272.552115] The buggy address belongs to the physical page:
[55272.552119] page:00000000af6c70ff refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x127500
[55272.552127] head:00000000af6c70ff order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[55272.552133] anon flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff)
[55272.552141] page_type: 0xffffffff()
[55272.552145] raw: 0017ffffc0010200 ffff888100042c80 0000000000000000 dead000000000001
[55272.552152] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
[55272.552157] page dumped because: kasan: bad access detected
[55272.552163] Memory state around the buggy address:
[55272.552167] ffff888127502700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[55272.552173] ffff888127502780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[55272.552178] >ffff888127502800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[55272.552184] ^
[55272.552187] ffff888127502880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[55272.552193] ffff888127502900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[55272.552198] ==================================================================
[55272.552203] Disabling lock debugging due to kernel taint
v2:
- Update commit message, add Fixes: tag and Cc stable.
v3:
- Further commit message updates (Maxime Ripard).
Cc: Maarten Lankhorst <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: [email protected]
Cc: [email protected] # v6.3+
Fixes: d987803 ("drm/tests: helpers: Allow to pass a custom drm_driver")
Signed-off-by: Thomas Hellström <[email protected]>
Reviewed-by: Francois Dugast <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>
1054009064
pushed a commit
to 1054009064/linux
that referenced
this pull request
Sep 23, 2023
commit 139a278 upstream. when using __drm_kunit_helper_alloc_drm_device() the driver may be dereferenced by device-managed resources up until the device is freed, which is typically later than the kunit-managed resource code frees it. Fix this by simply make the driver device-managed as well. In short, the sequence leading to the UAF is as follows: INIT: Code allocates a struct device as a kunit-managed resource. Code allocates a drm driver as a kunit-managed resource. Code allocates a drm device as a device-managed resource. EXIT: Kunit resource cleanup frees the drm driver Kunit resource cleanup puts the struct device, which starts a device-managed resource cleanup device-managed cleanup calls drm_dev_put() drm_dev_put() dereferences the (now freed) drm driver -> Boom. Related KASAN message: [55272.551542] ================================================================== [55272.551551] BUG: KASAN: slab-use-after-free in drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551603] Read of size 8 at addr ffff888127502828 by task kunit_try_catch/10353 [55272.551612] CPU: 4 PID: 10353 Comm: kunit_try_catch Tainted: G U N 6.5.0-rc7+ torvalds#155 [55272.551620] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021 [55272.551626] Call Trace: [55272.551629] <TASK> [55272.551633] dump_stack_lvl+0x57/0x90 [55272.551639] print_report+0xcf/0x630 [55272.551645] ? _raw_spin_lock_irqsave+0x5f/0x70 [55272.551652] ? drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551694] kasan_report+0xd7/0x110 [55272.551699] ? drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551742] drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551783] devres_release_all+0x15d/0x1f0 [55272.551790] ? __pfx_devres_release_all+0x10/0x10 [55272.551797] device_unbind_cleanup+0x16/0x1a0 [55272.551802] device_release_driver_internal+0x3e5/0x540 [55272.551808] ? kobject_put+0x5d/0x4b0 [55272.551814] bus_remove_device+0x1f1/0x3f0 [55272.551819] device_del+0x342/0x910 [55272.551826] ? __pfx_device_del+0x10/0x10 [55272.551830] ? lock_release+0x339/0x5e0 [55272.551836] ? kunit_remove_resource+0x128/0x290 [kunit] [55272.551845] ? __pfx_lock_release+0x10/0x10 [55272.551851] platform_device_del.part.0+0x1f/0x1e0 [55272.551856] ? _raw_spin_unlock_irqrestore+0x30/0x60 [55272.551863] kunit_remove_resource+0x195/0x290 [kunit] [55272.551871] ? _raw_spin_unlock_irqrestore+0x30/0x60 [55272.551877] kunit_cleanup+0x78/0x120 [kunit] [55272.551885] ? __kthread_parkme+0xc1/0x1f0 [55272.551891] ? __pfx_kunit_try_run_case_cleanup+0x10/0x10 [kunit] [55272.551900] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit] [55272.551909] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.551919] kthread+0x2e7/0x3c0 [55272.551924] ? __pfx_kthread+0x10/0x10 [55272.551929] ret_from_fork+0x2d/0x70 [55272.551935] ? __pfx_kthread+0x10/0x10 [55272.551940] ret_from_fork_asm+0x1b/0x30 [55272.551948] </TASK> [55272.551953] Allocated by task 10351: [55272.551956] kasan_save_stack+0x1c/0x40 [55272.551962] kasan_set_track+0x21/0x30 [55272.551966] __kasan_kmalloc+0x8b/0x90 [55272.551970] __kmalloc+0x5e/0x160 [55272.551976] kunit_kmalloc_array+0x1c/0x50 [kunit] [55272.551984] drm_exec_test_init+0xfa/0x2c0 [drm_exec_test] [55272.551991] kunit_try_run_case+0xdd/0x250 [kunit] [55272.551999] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.552008] kthread+0x2e7/0x3c0 [55272.552012] ret_from_fork+0x2d/0x70 [55272.552017] ret_from_fork_asm+0x1b/0x30 [55272.552024] Freed by task 10353: [55272.552027] kasan_save_stack+0x1c/0x40 [55272.552032] kasan_set_track+0x21/0x30 [55272.552036] kasan_save_free_info+0x27/0x40 [55272.552041] __kasan_slab_free+0x106/0x180 [55272.552046] slab_free_freelist_hook+0xb3/0x160 [55272.552051] __kmem_cache_free+0xb2/0x290 [55272.552056] kunit_remove_resource+0x195/0x290 [kunit] [55272.552064] kunit_cleanup+0x78/0x120 [kunit] [55272.552072] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.552080] kthread+0x2e7/0x3c0 [55272.552085] ret_from_fork+0x2d/0x70 [55272.552089] ret_from_fork_asm+0x1b/0x30 [55272.552096] The buggy address belongs to the object at ffff888127502800 which belongs to the cache kmalloc-512 of size 512 [55272.552105] The buggy address is located 40 bytes inside of freed 512-byte region [ffff888127502800, ffff888127502a00) [55272.552115] The buggy address belongs to the physical page: [55272.552119] page:00000000af6c70ff refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x127500 [55272.552127] head:00000000af6c70ff order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [55272.552133] anon flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff) [55272.552141] page_type: 0xffffffff() [55272.552145] raw: 0017ffffc0010200 ffff888100042c80 0000000000000000 dead000000000001 [55272.552152] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 [55272.552157] page dumped because: kasan: bad access detected [55272.552163] Memory state around the buggy address: [55272.552167] ffff888127502700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [55272.552173] ffff888127502780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [55272.552178] >ffff888127502800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [55272.552184] ^ [55272.552187] ffff888127502880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [55272.552193] ffff888127502900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [55272.552198] ================================================================== [55272.552203] Disabling lock debugging due to kernel taint v2: - Update commit message, add Fixes: tag and Cc stable. v3: - Further commit message updates (Maxime Ripard). Cc: Maarten Lankhorst <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Cc: [email protected] # v6.3+ Fixes: d987803 ("drm/tests: helpers: Allow to pass a custom drm_driver") Signed-off-by: Thomas Hellström <[email protected]> Reviewed-by: Francois Dugast <[email protected]> Acked-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maxime Ripard <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Grillo-0
pushed a commit
to Grillo-0/linux
that referenced
this pull request
Sep 27, 2023
when using __drm_kunit_helper_alloc_drm_device() the driver may be
dereferenced by device-managed resources up until the device is
freed, which is typically later than the kunit-managed resource code
frees it. Fix this by simply make the driver device-managed as well.
In short, the sequence leading to the UAF is as follows:
INIT:
Code allocates a struct device as a kunit-managed resource.
Code allocates a drm driver as a kunit-managed resource.
Code allocates a drm device as a device-managed resource.
EXIT:
Kunit resource cleanup frees the drm driver
Kunit resource cleanup puts the struct device, which starts a
device-managed resource cleanup
device-managed cleanup calls drm_dev_put()
drm_dev_put() dereferences the (now freed) drm driver -> Boom.
Related KASAN message:
[55272.551542] ==================================================================
[55272.551551] BUG: KASAN: slab-use-after-free in drm_dev_put.part.0+0xd4/0xe0 [drm]
[55272.551603] Read of size 8 at addr ffff888127502828 by task kunit_try_catch/10353
[55272.551612] CPU: 4 PID: 10353 Comm: kunit_try_catch Tainted: G U N 6.5.0-rc7+ torvalds#155
[55272.551620] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021
[55272.551626] Call Trace:
[55272.551629] <TASK>
[55272.551633] dump_stack_lvl+0x57/0x90
[55272.551639] print_report+0xcf/0x630
[55272.551645] ? _raw_spin_lock_irqsave+0x5f/0x70
[55272.551652] ? drm_dev_put.part.0+0xd4/0xe0 [drm]
[55272.551694] kasan_report+0xd7/0x110
[55272.551699] ? drm_dev_put.part.0+0xd4/0xe0 [drm]
[55272.551742] drm_dev_put.part.0+0xd4/0xe0 [drm]
[55272.551783] devres_release_all+0x15d/0x1f0
[55272.551790] ? __pfx_devres_release_all+0x10/0x10
[55272.551797] device_unbind_cleanup+0x16/0x1a0
[55272.551802] device_release_driver_internal+0x3e5/0x540
[55272.551808] ? kobject_put+0x5d/0x4b0
[55272.551814] bus_remove_device+0x1f1/0x3f0
[55272.551819] device_del+0x342/0x910
[55272.551826] ? __pfx_device_del+0x10/0x10
[55272.551830] ? lock_release+0x339/0x5e0
[55272.551836] ? kunit_remove_resource+0x128/0x290 [kunit]
[55272.551845] ? __pfx_lock_release+0x10/0x10
[55272.551851] platform_device_del.part.0+0x1f/0x1e0
[55272.551856] ? _raw_spin_unlock_irqrestore+0x30/0x60
[55272.551863] kunit_remove_resource+0x195/0x290 [kunit]
[55272.551871] ? _raw_spin_unlock_irqrestore+0x30/0x60
[55272.551877] kunit_cleanup+0x78/0x120 [kunit]
[55272.551885] ? __kthread_parkme+0xc1/0x1f0
[55272.551891] ? __pfx_kunit_try_run_case_cleanup+0x10/0x10 [kunit]
[55272.551900] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit]
[55272.551909] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit]
[55272.551919] kthread+0x2e7/0x3c0
[55272.551924] ? __pfx_kthread+0x10/0x10
[55272.551929] ret_from_fork+0x2d/0x70
[55272.551935] ? __pfx_kthread+0x10/0x10
[55272.551940] ret_from_fork_asm+0x1b/0x30
[55272.551948] </TASK>
[55272.551953] Allocated by task 10351:
[55272.551956] kasan_save_stack+0x1c/0x40
[55272.551962] kasan_set_track+0x21/0x30
[55272.551966] __kasan_kmalloc+0x8b/0x90
[55272.551970] __kmalloc+0x5e/0x160
[55272.551976] kunit_kmalloc_array+0x1c/0x50 [kunit]
[55272.551984] drm_exec_test_init+0xfa/0x2c0 [drm_exec_test]
[55272.551991] kunit_try_run_case+0xdd/0x250 [kunit]
[55272.551999] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit]
[55272.552008] kthread+0x2e7/0x3c0
[55272.552012] ret_from_fork+0x2d/0x70
[55272.552017] ret_from_fork_asm+0x1b/0x30
[55272.552024] Freed by task 10353:
[55272.552027] kasan_save_stack+0x1c/0x40
[55272.552032] kasan_set_track+0x21/0x30
[55272.552036] kasan_save_free_info+0x27/0x40
[55272.552041] __kasan_slab_free+0x106/0x180
[55272.552046] slab_free_freelist_hook+0xb3/0x160
[55272.552051] __kmem_cache_free+0xb2/0x290
[55272.552056] kunit_remove_resource+0x195/0x290 [kunit]
[55272.552064] kunit_cleanup+0x78/0x120 [kunit]
[55272.552072] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit]
[55272.552080] kthread+0x2e7/0x3c0
[55272.552085] ret_from_fork+0x2d/0x70
[55272.552089] ret_from_fork_asm+0x1b/0x30
[55272.552096] The buggy address belongs to the object at ffff888127502800
which belongs to the cache kmalloc-512 of size 512
[55272.552105] The buggy address is located 40 bytes inside of
freed 512-byte region [ffff888127502800, ffff888127502a00)
[55272.552115] The buggy address belongs to the physical page:
[55272.552119] page:00000000af6c70ff refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x127500
[55272.552127] head:00000000af6c70ff order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[55272.552133] anon flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff)
[55272.552141] page_type: 0xffffffff()
[55272.552145] raw: 0017ffffc0010200 ffff888100042c80 0000000000000000 dead000000000001
[55272.552152] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
[55272.552157] page dumped because: kasan: bad access detected
[55272.552163] Memory state around the buggy address:
[55272.552167] ffff888127502700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[55272.552173] ffff888127502780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[55272.552178] >ffff888127502800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[55272.552184] ^
[55272.552187] ffff888127502880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[55272.552193] ffff888127502900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[55272.552198] ==================================================================
[55272.552203] Disabling lock debugging due to kernel taint
v2:
- Update commit message, add Fixes: tag and Cc stable.
v3:
- Further commit message updates (Maxime Ripard).
Cc: Maarten Lankhorst <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: [email protected]
Cc: [email protected] # v6.3+
Fixes: d987803 ("drm/tests: helpers: Allow to pass a custom drm_driver")
Signed-off-by: Thomas Hellström <[email protected]>
Reviewed-by: Francois Dugast <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>
modules-kpd-app bot
pushed a commit
to linux-kdevops/linux-modules-kpd
that referenced
this pull request
Nov 8, 2024
When ro_after_init fails, we need to unload the module. Rename the goto tag to fail_ro_after_init to make it more clear and try to check for dependencies, stop the module and call the exit function. This allows to unload the module if ro_after_init fails. This fixes the following error in block loop device driver when forcing ro_after_init error path: Nov 06 11:36:25 debian kernel: loop: module loaded Nov 06 11:36:25 debian kernel: BUG: unable to handle page fault for address: ffffffffa0006320 Nov 06 11:36:25 debian kernel: #PF: supervisor read access in kernel mode Nov 06 11:36:25 debian kernel: #PF: error_code(0x0000) - not-present page Nov 06 11:36:25 debian kernel: PGD 1e3f067 P4D 1e3f067 PUD 1e40063 PMD 10e7d4067 PTE 0 Nov 06 11:36:25 debian kernel: Oops: Oops: 0000 [#1] Nov 06 11:36:25 debian kernel: CPU: 0 UID: 0 PID: 428 Comm: (udev-worker) Not tainted 6.12.0-rc6-g4ade030a2d1b torvalds#155 Nov 06 11:36:25 debian kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Nov 06 11:36:25 debian kernel: RIP: 0010:bdev_open+0x83/0x290 Nov 06 11:36:25 debian kernel: Code: bb 48 01 00 00 48 89 3c 24 e8 79 24 38 00 48 8b 43 40 41 bd fa ff ff ff 48 83 b8 40 03 00 00 00 0f 84 b3 01 00 00 48 8b 43 48 <48> 8b 78 78 e8 d4 c9 c8 ff 84 c0 0f 84 9e 01 00 00 80 3d 45 ad ad Nov 06 11:36:25 debian kernel: RSP: 0018:ffff8881054dbc58 EFLAGS: 00010286 Nov 06 11:36:25 debian kernel: RAX: ffffffffa00062a8 RBX: ffff8881054a6800 RCX: ffff8881075becc0 Nov 06 11:36:25 debian kernel: RDX: 0000000000000000 RSI: 0000000000000009 RDI: ffff8881054a6948 Nov 06 11:36:25 debian kernel: RBP: 0000000000000009 R08: ffff88810e7aa9c0 R09: 0000000000000000 Nov 06 11:36:25 debian kernel: R10: ffff88810e5ab0c0 R11: ffff88810e796190 R12: ffff88810094e980 Nov 06 11:36:25 debian kernel: R13: 00000000fffffffa R14: 0000000000000000 R15: 0000000000000000 Nov 06 11:36:25 debian kernel: FS: 00007fd2ff110900(0000) GS:ffffffff81e47000(0000) knlGS:0000000000000000 Nov 06 11:36:25 debian kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Nov 06 11:36:25 debian kernel: CR2: ffffffffa0006320 CR3: 000000010e7ed004 CR4: 00000000003706b0 Nov 06 11:36:25 debian kernel: Call Trace: Nov 06 11:36:25 debian kernel: <TASK> Nov 06 11:36:25 debian kernel: ? __die_body+0x16/0x60 Nov 06 11:36:25 debian kernel: ? page_fault_oops+0x22a/0x310 Nov 06 11:36:25 debian kernel: ? exc_page_fault+0x99/0xa0 Nov 06 11:36:25 debian kernel: ? asm_exc_page_fault+0x22/0x30 Nov 06 11:36:25 debian kernel: ? bdev_open+0x83/0x290 Nov 06 11:36:25 debian kernel: ? bdev_open+0x67/0x290 Nov 06 11:36:25 debian kernel: ? iput+0x37/0x150 Nov 06 11:36:25 debian kernel: ? blkdev_open+0xab/0xd0 Nov 06 11:36:25 debian kernel: ? blkdev_mmap+0x60/0x60 Nov 06 11:36:25 debian kernel: ? do_dentry_open+0x25d/0x3b0 Nov 06 11:36:25 debian kernel: ? vfs_open+0x1e/0xc0 Nov 06 11:36:25 debian kernel: ? path_openat+0x9cf/0xbb0 Nov 06 11:36:25 debian kernel: ? do_filp_open+0x7f/0xd0 Nov 06 11:36:25 debian kernel: ? do_sys_openat2+0x67/0xb0 Nov 06 11:36:25 debian kernel: ? do_sys_open+0x4b/0x50 Nov 06 11:36:25 debian kernel: ? do_syscall_64+0x3d/0xb0 Nov 06 11:36:25 debian kernel: ? entry_SYSCALL_64_after_hwframe+0x4b/0x53 Nov 06 11:36:25 debian kernel: </TASK> Nov 06 11:36:25 debian kernel: Modules linked in: Nov 06 11:36:25 debian kernel: CR2: ffffffffa0006320 Nov 06 11:36:25 debian kernel: ---[ end trace 0000000000000000 ]--- ./scripts/faddr2line --list vmlinux bdev_open+0x83/0x290 bdev_open+0x83/0x290: bdev_open at block/bdev.c:908 903 904 mutex_lock(&disk->open_mutex); 905 ret = -ENXIO; 906 if (!disk_live(disk)) 907 goto abort_claiming; >908< if (!try_module_get(disk->fops->owner)) 909 goto abort_claiming; 910 ret = -EBUSY; 911 if (!bdev_may_open(bdev, mode)) 912 goto put_module; 913 if (bdev_is_partition(bdev)) Reported-by: Thomas Gleixner <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Fixes: d1909c0 ("module: Don't ignore errors from set_memory_XX()"). Signed-off-by: Daniel Gomez <[email protected]>
hbiyik
pushed a commit
to hbiyik/linux
that referenced
this pull request
Nov 25, 2024
If *any* object of a certain WW mutex class is locked, lockdep will consider *all* mutexes of that class as locked. Also the lock allocation tracking code will apparently register only the address of the first mutex of a given class locked in a sequence. This has the odd consequence that if that first mutex is unlocked while other mutexes of the same class remain locked and then its memory then freed, the lock alloc tracking code will incorrectly assume that memory is freed with a held lock in there. For now, work around that for drm_exec by releasing the first grabbed object lock last. v2: - Fix a typo (Danilo Krummrich) - Reword the commit message a bit. - Add a Fixes: tag Related lock alloc tracking warning: [ 322.660067] ========================= [ 322.660070] WARNING: held lock freed! [ 322.660074] 6.5.0-rc7+ torvalds#155 Tainted: G U N [ 322.660078] ------------------------- [ 322.660081] kunit_try_catch/4981 is freeing memory ffff888112adc000-ffff888112adc3ff, with a lock still held there! [ 322.660089] ffff888112adc1a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x11a/0x600 [drm_exec] [ 322.660104] 2 locks held by kunit_try_catch/4981: [ 322.660108] #0: ffffc9000343fe18 (reservation_ww_class_acquire){+.+.}-{0:0}, at: test_early_put+0x22f/0x490 [drm_exec_test] [ 322.660123] #1: ffff888112adc1a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x11a/0x600 [drm_exec] [ 322.660135] stack backtrace: [ 322.660139] CPU: 7 PID: 4981 Comm: kunit_try_catch Tainted: G U N 6.5.0-rc7+ torvalds#155 [ 322.660146] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021 [ 322.660152] Call Trace: [ 322.660155] <TASK> [ 322.660158] dump_stack_lvl+0x57/0x90 [ 322.660164] debug_check_no_locks_freed+0x20b/0x2b0 [ 322.660172] slab_free_freelist_hook+0xa1/0x160 [ 322.660179] ? drm_exec_unlock_all+0x168/0x2a0 [drm_exec] [ 322.660186] __kmem_cache_free+0xb2/0x290 [ 322.660192] drm_exec_unlock_all+0x168/0x2a0 [drm_exec] [ 322.660200] drm_exec_fini+0xf/0x1c0 [drm_exec] [ 322.660206] test_early_put+0x289/0x490 [drm_exec_test] [ 322.660215] ? __pfx_test_early_put+0x10/0x10 [drm_exec_test] [ 322.660222] ? __kasan_check_byte+0xf/0x40 [ 322.660227] ? __ksize+0x63/0x140 [ 322.660233] ? drmm_add_final_kfree+0x3e/0xa0 [drm] [ 322.660289] ? _raw_spin_unlock_irqrestore+0x30/0x60 [ 322.660294] ? lockdep_hardirqs_on+0x7d/0x100 [ 322.660301] ? __pfx_kunit_try_run_case+0x10/0x10 [kunit] [ 322.660310] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit] [ 322.660319] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [ 322.660328] kthread+0x2e7/0x3c0 [ 322.660334] ? __pfx_kthread+0x10/0x10 [ 322.660339] ret_from_fork+0x2d/0x70 [ 322.660345] ? __pfx_kthread+0x10/0x10 [ 322.660349] ret_from_fork_asm+0x1b/0x30 [ 322.660358] </TASK> [ 322.660818] ok 8 test_early_put Cc: Christian König <[email protected]> Cc: Boris Brezillon <[email protected]> Cc: Danilo Krummrich <[email protected]> Cc: [email protected] Fixes: 0959321 ("drm: execution context for GEM buffers v7") Signed-off-by: Thomas Hellström <[email protected]> Reviewed-by: Boris Brezillon <[email protected]> Reviewed-by: Danilo Krummrich <[email protected]> Reviewed-by: Christian König <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
hbiyik
pushed a commit
to hbiyik/linux
that referenced
this pull request
Nov 25, 2024
If *any* object of a certain WW mutex class is locked, lockdep will consider *all* mutexes of that class as locked. Also the lock allocation tracking code will apparently register only the address of the first mutex of a given class locked in a sequence. This has the odd consequence that if that first mutex is unlocked while other mutexes of the same class remain locked and then its memory then freed, the lock alloc tracking code will incorrectly assume that memory is freed with a held lock in there. For now, work around that for drm_exec by releasing the first grabbed object lock last. v2: - Fix a typo (Danilo Krummrich) - Reword the commit message a bit. - Add a Fixes: tag Related lock alloc tracking warning: [ 322.660067] ========================= [ 322.660070] WARNING: held lock freed! [ 322.660074] 6.5.0-rc7+ torvalds#155 Tainted: G U N [ 322.660078] ------------------------- [ 322.660081] kunit_try_catch/4981 is freeing memory ffff888112adc000-ffff888112adc3ff, with a lock still held there! [ 322.660089] ffff888112adc1a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x11a/0x600 [drm_exec] [ 322.660104] 2 locks held by kunit_try_catch/4981: [ 322.660108] #0: ffffc9000343fe18 (reservation_ww_class_acquire){+.+.}-{0:0}, at: test_early_put+0x22f/0x490 [drm_exec_test] [ 322.660123] #1: ffff888112adc1a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x11a/0x600 [drm_exec] [ 322.660135] stack backtrace: [ 322.660139] CPU: 7 PID: 4981 Comm: kunit_try_catch Tainted: G U N 6.5.0-rc7+ torvalds#155 [ 322.660146] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021 [ 322.660152] Call Trace: [ 322.660155] <TASK> [ 322.660158] dump_stack_lvl+0x57/0x90 [ 322.660164] debug_check_no_locks_freed+0x20b/0x2b0 [ 322.660172] slab_free_freelist_hook+0xa1/0x160 [ 322.660179] ? drm_exec_unlock_all+0x168/0x2a0 [drm_exec] [ 322.660186] __kmem_cache_free+0xb2/0x290 [ 322.660192] drm_exec_unlock_all+0x168/0x2a0 [drm_exec] [ 322.660200] drm_exec_fini+0xf/0x1c0 [drm_exec] [ 322.660206] test_early_put+0x289/0x490 [drm_exec_test] [ 322.660215] ? __pfx_test_early_put+0x10/0x10 [drm_exec_test] [ 322.660222] ? __kasan_check_byte+0xf/0x40 [ 322.660227] ? __ksize+0x63/0x140 [ 322.660233] ? drmm_add_final_kfree+0x3e/0xa0 [drm] [ 322.660289] ? _raw_spin_unlock_irqrestore+0x30/0x60 [ 322.660294] ? lockdep_hardirqs_on+0x7d/0x100 [ 322.660301] ? __pfx_kunit_try_run_case+0x10/0x10 [kunit] [ 322.660310] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit] [ 322.660319] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [ 322.660328] kthread+0x2e7/0x3c0 [ 322.660334] ? __pfx_kthread+0x10/0x10 [ 322.660339] ret_from_fork+0x2d/0x70 [ 322.660345] ? __pfx_kthread+0x10/0x10 [ 322.660349] ret_from_fork_asm+0x1b/0x30 [ 322.660358] </TASK> [ 322.660818] ok 8 test_early_put Cc: Christian König <[email protected]> Cc: Boris Brezillon <[email protected]> Cc: Danilo Krummrich <[email protected]> Cc: [email protected] Fixes: 0959321 ("drm: execution context for GEM buffers v7") Signed-off-by: Thomas Hellström <[email protected]> Reviewed-by: Boris Brezillon <[email protected]> Reviewed-by: Danilo Krummrich <[email protected]> Reviewed-by: Christian König <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
modules-kpd-app bot
pushed a commit
to linux-kdevops/linux-modules-kpd
that referenced
this pull request
Nov 26, 2024
When ro_after_init fails, we need to unload the module. Rename the goto tag to fail_ro_after_init to make it more clear and try to check for dependencies, stop the module and call the exit function. This allows to unload the module if ro_after_init fails. This fixes the following error in block loop device driver when forcing ro_after_init error path: Nov 06 11:36:25 debian kernel: loop: module loaded Nov 06 11:36:25 debian kernel: BUG: unable to handle page fault for address: ffffffffa0006320 Nov 06 11:36:25 debian kernel: #PF: supervisor read access in kernel mode Nov 06 11:36:25 debian kernel: #PF: error_code(0x0000) - not-present page Nov 06 11:36:25 debian kernel: PGD 1e3f067 P4D 1e3f067 PUD 1e40063 PMD 10e7d4067 PTE 0 Nov 06 11:36:25 debian kernel: Oops: Oops: 0000 [#1] Nov 06 11:36:25 debian kernel: CPU: 0 UID: 0 PID: 428 Comm: (udev-worker) Not tainted 6.12.0-rc6-g4ade030a2d1b torvalds#155 Nov 06 11:36:25 debian kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Nov 06 11:36:25 debian kernel: RIP: 0010:bdev_open+0x83/0x290 Nov 06 11:36:25 debian kernel: Code: bb 48 01 00 00 48 89 3c 24 e8 79 24 38 00 48 8b 43 40 41 bd fa ff ff ff 48 83 b8 40 03 00 00 00 0f 84 b3 01 00 00 48 8b 43 48 <48> 8b 78 78 e8 d4 c9 c8 ff 84 c0 0f 84 9e 01 00 00 80 3d 45 ad ad Nov 06 11:36:25 debian kernel: RSP: 0018:ffff8881054dbc58 EFLAGS: 00010286 Nov 06 11:36:25 debian kernel: RAX: ffffffffa00062a8 RBX: ffff8881054a6800 RCX: ffff8881075becc0 Nov 06 11:36:25 debian kernel: RDX: 0000000000000000 RSI: 0000000000000009 RDI: ffff8881054a6948 Nov 06 11:36:25 debian kernel: RBP: 0000000000000009 R08: ffff88810e7aa9c0 R09: 0000000000000000 Nov 06 11:36:25 debian kernel: R10: ffff88810e5ab0c0 R11: ffff88810e796190 R12: ffff88810094e980 Nov 06 11:36:25 debian kernel: R13: 00000000fffffffa R14: 0000000000000000 R15: 0000000000000000 Nov 06 11:36:25 debian kernel: FS: 00007fd2ff110900(0000) GS:ffffffff81e47000(0000) knlGS:0000000000000000 Nov 06 11:36:25 debian kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Nov 06 11:36:25 debian kernel: CR2: ffffffffa0006320 CR3: 000000010e7ed004 CR4: 00000000003706b0 Nov 06 11:36:25 debian kernel: Call Trace: Nov 06 11:36:25 debian kernel: <TASK> Nov 06 11:36:25 debian kernel: ? __die_body+0x16/0x60 Nov 06 11:36:25 debian kernel: ? page_fault_oops+0x22a/0x310 Nov 06 11:36:25 debian kernel: ? exc_page_fault+0x99/0xa0 Nov 06 11:36:25 debian kernel: ? asm_exc_page_fault+0x22/0x30 Nov 06 11:36:25 debian kernel: ? bdev_open+0x83/0x290 Nov 06 11:36:25 debian kernel: ? bdev_open+0x67/0x290 Nov 06 11:36:25 debian kernel: ? iput+0x37/0x150 Nov 06 11:36:25 debian kernel: ? blkdev_open+0xab/0xd0 Nov 06 11:36:25 debian kernel: ? blkdev_mmap+0x60/0x60 Nov 06 11:36:25 debian kernel: ? do_dentry_open+0x25d/0x3b0 Nov 06 11:36:25 debian kernel: ? vfs_open+0x1e/0xc0 Nov 06 11:36:25 debian kernel: ? path_openat+0x9cf/0xbb0 Nov 06 11:36:25 debian kernel: ? do_filp_open+0x7f/0xd0 Nov 06 11:36:25 debian kernel: ? do_sys_openat2+0x67/0xb0 Nov 06 11:36:25 debian kernel: ? do_sys_open+0x4b/0x50 Nov 06 11:36:25 debian kernel: ? do_syscall_64+0x3d/0xb0 Nov 06 11:36:25 debian kernel: ? entry_SYSCALL_64_after_hwframe+0x4b/0x53 Nov 06 11:36:25 debian kernel: </TASK> Nov 06 11:36:25 debian kernel: Modules linked in: Nov 06 11:36:25 debian kernel: CR2: ffffffffa0006320 Nov 06 11:36:25 debian kernel: ---[ end trace 0000000000000000 ]--- ./scripts/faddr2line --list vmlinux bdev_open+0x83/0x290 bdev_open+0x83/0x290: bdev_open at block/bdev.c:908 903 904 mutex_lock(&disk->open_mutex); 905 ret = -ENXIO; 906 if (!disk_live(disk)) 907 goto abort_claiming; >908< if (!try_module_get(disk->fops->owner)) 909 goto abort_claiming; 910 ret = -EBUSY; 911 if (!bdev_may_open(bdev, mode)) 912 goto put_module; 913 if (bdev_is_partition(bdev)) Reported-by: Thomas Gleixner <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Fixes: d1909c0 ("module: Don't ignore errors from set_memory_XX()"). Signed-off-by: Daniel Gomez <[email protected]>
modules-kpd-app bot
pushed a commit
to linux-kdevops/linux-modules-kpd
that referenced
this pull request
Nov 28, 2024
When ro_after_init fails, we need to unload the module. Rename the goto tag to fail_ro_after_init to make it more clear and try to check for dependencies, stop the module and call the exit function. This allows to unload the module if ro_after_init fails. This fixes the following error in block loop device driver when forcing ro_after_init error path: Nov 06 11:36:25 debian kernel: loop: module loaded Nov 06 11:36:25 debian kernel: BUG: unable to handle page fault for address: ffffffffa0006320 Nov 06 11:36:25 debian kernel: #PF: supervisor read access in kernel mode Nov 06 11:36:25 debian kernel: #PF: error_code(0x0000) - not-present page Nov 06 11:36:25 debian kernel: PGD 1e3f067 P4D 1e3f067 PUD 1e40063 PMD 10e7d4067 PTE 0 Nov 06 11:36:25 debian kernel: Oops: Oops: 0000 [#1] Nov 06 11:36:25 debian kernel: CPU: 0 UID: 0 PID: 428 Comm: (udev-worker) Not tainted 6.12.0-rc6-g4ade030a2d1b torvalds#155 Nov 06 11:36:25 debian kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Nov 06 11:36:25 debian kernel: RIP: 0010:bdev_open+0x83/0x290 Nov 06 11:36:25 debian kernel: Code: bb 48 01 00 00 48 89 3c 24 e8 79 24 38 00 48 8b 43 40 41 bd fa ff ff ff 48 83 b8 40 03 00 00 00 0f 84 b3 01 00 00 48 8b 43 48 <48> 8b 78 78 e8 d4 c9 c8 ff 84 c0 0f 84 9e 01 00 00 80 3d 45 ad ad Nov 06 11:36:25 debian kernel: RSP: 0018:ffff8881054dbc58 EFLAGS: 00010286 Nov 06 11:36:25 debian kernel: RAX: ffffffffa00062a8 RBX: ffff8881054a6800 RCX: ffff8881075becc0 Nov 06 11:36:25 debian kernel: RDX: 0000000000000000 RSI: 0000000000000009 RDI: ffff8881054a6948 Nov 06 11:36:25 debian kernel: RBP: 0000000000000009 R08: ffff88810e7aa9c0 R09: 0000000000000000 Nov 06 11:36:25 debian kernel: R10: ffff88810e5ab0c0 R11: ffff88810e796190 R12: ffff88810094e980 Nov 06 11:36:25 debian kernel: R13: 00000000fffffffa R14: 0000000000000000 R15: 0000000000000000 Nov 06 11:36:25 debian kernel: FS: 00007fd2ff110900(0000) GS:ffffffff81e47000(0000) knlGS:0000000000000000 Nov 06 11:36:25 debian kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Nov 06 11:36:25 debian kernel: CR2: ffffffffa0006320 CR3: 000000010e7ed004 CR4: 00000000003706b0 Nov 06 11:36:25 debian kernel: Call Trace: Nov 06 11:36:25 debian kernel: <TASK> Nov 06 11:36:25 debian kernel: ? __die_body+0x16/0x60 Nov 06 11:36:25 debian kernel: ? page_fault_oops+0x22a/0x310 Nov 06 11:36:25 debian kernel: ? exc_page_fault+0x99/0xa0 Nov 06 11:36:25 debian kernel: ? asm_exc_page_fault+0x22/0x30 Nov 06 11:36:25 debian kernel: ? bdev_open+0x83/0x290 Nov 06 11:36:25 debian kernel: ? bdev_open+0x67/0x290 Nov 06 11:36:25 debian kernel: ? iput+0x37/0x150 Nov 06 11:36:25 debian kernel: ? blkdev_open+0xab/0xd0 Nov 06 11:36:25 debian kernel: ? blkdev_mmap+0x60/0x60 Nov 06 11:36:25 debian kernel: ? do_dentry_open+0x25d/0x3b0 Nov 06 11:36:25 debian kernel: ? vfs_open+0x1e/0xc0 Nov 06 11:36:25 debian kernel: ? path_openat+0x9cf/0xbb0 Nov 06 11:36:25 debian kernel: ? do_filp_open+0x7f/0xd0 Nov 06 11:36:25 debian kernel: ? do_sys_openat2+0x67/0xb0 Nov 06 11:36:25 debian kernel: ? do_sys_open+0x4b/0x50 Nov 06 11:36:25 debian kernel: ? do_syscall_64+0x3d/0xb0 Nov 06 11:36:25 debian kernel: ? entry_SYSCALL_64_after_hwframe+0x4b/0x53 Nov 06 11:36:25 debian kernel: </TASK> Nov 06 11:36:25 debian kernel: Modules linked in: Nov 06 11:36:25 debian kernel: CR2: ffffffffa0006320 Nov 06 11:36:25 debian kernel: ---[ end trace 0000000000000000 ]--- ./scripts/faddr2line --list vmlinux bdev_open+0x83/0x290 bdev_open+0x83/0x290: bdev_open at block/bdev.c:908 903 904 mutex_lock(&disk->open_mutex); 905 ret = -ENXIO; 906 if (!disk_live(disk)) 907 goto abort_claiming; >908< if (!try_module_get(disk->fops->owner)) 909 goto abort_claiming; 910 ret = -EBUSY; 911 if (!bdev_may_open(bdev, mode)) 912 goto put_module; 913 if (bdev_is_partition(bdev)) Reported-by: Thomas Gleixner <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Fixes: d1909c0 ("module: Don't ignore errors from set_memory_XX()"). Signed-off-by: Daniel Gomez <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.