Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/…

…kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Here are some bugfixes for the I2C subsystem.

  Kieran found a flaw in the recently renewed wake irq handling.  Mika
  handled a user bug report where the ACPI info turned out to be
  unusable.  I updated MAINTAINERS so that such bug reports will sooner
  get to the right people.  Geert pointed me to a problem of some i2c
  drivers regarding PM which I fixed"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348
  MAINTAINERS: add maintainers for Synopsis Designware I2C drivers
  i2c: designware-platdrv: enable RuntimePM before registering to the core
  i2c: s3c2410: enable RuntimePM before registering to the core
  i2c: rcar: enable RuntimePM before registering to the core
  i2c: return probe deferred status on dev_pm_domain_attach

MAINTAINERS

@@ -9116,6 +9116,15 @@ S: Supported
 F: Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt
 F: drivers/net/ethernet/synopsys/dwc_eth_qos.c
 
+SYNOPSYS DESIGNWARE I2C DRIVER
+M:	Andy Shevchenko <[email protected]>
+M:	Jarkko Nikula <[email protected]>
+M:	Mika Westerberg <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	drivers/i2c/busses/i2c-designware-*
+F:	include/linux/platform_data/i2c-designware.h
+
 SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER
 M:	Seungwon Jeon <[email protected]>
 M:	Jaehoon Chung <[email protected]>

drivers/i2c/busses/i2c-designware-platdrv.c

@@ -24,6 +24,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/delay.h>
+#include <linux/dmi.h>
 #include <linux/i2c.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
@@ -51,13 +52,32 @@ static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
 }
 
 #ifdef CONFIG_ACPI
+/*
+ * The HCNT/LCNT information coming from ACPI should be the most accurate
+ * for given platform. However, some systems get it wrong. On such systems
+ * we get better results by calculating those based on the input clock.
+ */
+static const struct dmi_system_id dw_i2c_no_acpi_params[] = {
+	{
+		.ident = "Dell Inspiron 7348",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7348"),
+		},
+	},
+	{ }
+};
+
 static void dw_i2c_acpi_params(struct platform_device *pdev, char method[],
 			       u16 *hcnt, u16 *lcnt, u32 *sda_hold)
 {
 	struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
 	acpi_handle handle = ACPI_HANDLE(&pdev->dev);
 	union acpi_object *obj;
 
+	if (dmi_check_system(dw_i2c_no_acpi_params))
+		return;
+
 	if (ACPI_FAILURE(acpi_evaluate_object(handle, method, NULL, &buf)))
 		return;
 
@@ -253,12 +273,6 @@ static int dw_i2c_probe(struct platform_device *pdev)
 	adap->dev.parent = &pdev->dev;
 	adap->dev.of_node = pdev->dev.of_node;
 
-	r = i2c_add_numbered_adapter(adap);
-	if (r) {
-		dev_err(&pdev->dev, "failure adding adapter\n");
-		return r;
-	}
-
 	if (dev->pm_runtime_disabled) {
 		pm_runtime_forbid(&pdev->dev);
 	} else {
@@ -268,6 +282,13 @@ static int dw_i2c_probe(struct platform_device *pdev)
 		pm_runtime_enable(&pdev->dev);
 	}
 
+	r = i2c_add_numbered_adapter(adap);
+	if (r) {
+		dev_err(&pdev->dev, "failure adding adapter\n");
+		pm_runtime_disable(&pdev->dev);
+		return r;
+	}
+
 	return 0;
 }
 

drivers/i2c/busses/i2c-rcar.c

@@ -690,15 +690,16 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	pm_runtime_enable(dev);
+	platform_set_drvdata(pdev, priv);
+
 	ret = i2c_add_numbered_adapter(adap);
 	if (ret < 0) {
 		dev_err(dev, "reg adap failed: %d\n", ret);
+		pm_runtime_disable(dev);
 		return ret;
 	}
 
-	pm_runtime_enable(dev);
-	platform_set_drvdata(pdev, priv);
-
 	dev_info(dev, "probed\n");
 
 	return 0;

drivers/i2c/busses/i2c-s3c2410.c

@@ -1243,17 +1243,19 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 	i2c->adap.nr = i2c->pdata->bus_num;
 	i2c->adap.dev.of_node = pdev->dev.of_node;
 
+	platform_set_drvdata(pdev, i2c);
+
+	pm_runtime_enable(&pdev->dev);
+
 	ret = i2c_add_numbered_adapter(&i2c->adap);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+		pm_runtime_disable(&pdev->dev);
 		s3c24xx_i2c_deregister_cpufreq(i2c);
 		clk_unprepare(i2c->clk);
 		return ret;
 	}
 
-	platform_set_drvdata(pdev, i2c);
-
-	pm_runtime_enable(&pdev->dev);
 	pm_runtime_enable(&i2c->adap.dev);
 
 	dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));

drivers/i2c/i2c-core.c

@@ -694,12 +694,12 @@ static int i2c_device_probe(struct device *dev)
 		goto err_clear_wakeup_irq;
 
 	status = dev_pm_domain_attach(&client->dev, true);
-	if (status != -EPROBE_DEFER) {
-		status = driver->probe(client, i2c_match_id(driver->id_table,
-					client));
-		if (status)
-			goto err_detach_pm_domain;
-	}
+	if (status == -EPROBE_DEFER)
+		goto err_clear_wakeup_irq;
+
+	status = driver->probe(client, i2c_match_id(driver->id_table, client));
+	if (status)
+		goto err_detach_pm_domain;
 
 	return 0;