Welcome to our Sound Reactive fork of WLED. In addition to the features of WLED below, we also support:
- Audio input from several sources including MAX4466, MAX9814, MAX9184, INMP401, INMP441 (for ESP32) and line-in.
- Volume reactive visual effects for ESP32 and ESP8266 devices.
- Frequency reactive visual effects for ESP32 devices.
- UDP sound synchronization with transmit for ESP32 and receive for ESP8266 and ESP32 devices.
- 2D visual effects for ESP32 devices.
- Squelch and gain settings for ESP8266 and ESP32 devices for the volume reactive visual effects.
- 2D settings for ESP32 devices.
- Frequency reactive sliders for ESP32 devices.
We currently have 3 active forks for our Sound Reactive WLED. They are:
- ESP32 standard version (ESP8266 will be deprecated)
- ESP32 development version (ESP8266 will be deprecated)
- ESP8266 version
In addition, we have a Sound Reactive WLED Wiki.
Join Discord to discuss beta testing of our sound reactive fork of WLED:
Join Discord to discuss AirCookie's WLED:
And now onto regular WLED . . .
A fast and feature-rich implementation of an ESP8266/ESP32 webserver to control NeoPixel (WS2812B, WS2811, SK6812, APA102) LEDs or also SPI based chipsets like the WS2801!
- WS2812FX library integrated for over 100 special effects
- FastLED noise effects and 50 palettes
- Modern UI with color, effect and segment controls
- Segments to set different effects and colors to parts of the LEDs
- Settings page - configuration over network
- Access Point and station mode - automatic failsafe AP
- Support for RGBW strips
- 16 user presets to save and load colors/effects easily, supports cycling through them.
- Macro functions to automatically execute API calls
- Nightlight function (gradually dims down)
- Full OTA software updatability (HTTP + ArduinoOTA), password protectable
- Configurable analog clock + support for the Cronixie kit by Diamex
- Configurable Auto Brightness limit for safer operation
- WLED app for Android and iOS
- JSON and HTTP request APIs
- MQTT
- Blynk IoT
- E1.31
- Hyperion
- UDP realtime
- Alexa voice control (including dimming and color)
- Sync to Philips hue lights
- Adalight (PC ambilight via serial)
- Sync color of multiple WLED devices (UDP notifier)
- Infrared remotes (24-key RGB, receiver required)
- Simple timers/schedules (time from NTP, timezones/DST supported)
See the wiki!
DrZzs has made some excellent video guides: Introduction, hardware and installation Settings, tips and tricks
If you'd rather read, here is a very detailed step-by-step beginner tutorial by tynick!
Russian speakers, check out the videos by Room31: WLED Firmware Overview: Interface and Settings ESP8266 based LED controller for WS2812b strip. WLED Firmware + OpenHAB
| Type | Voltage | Comments |
|---|---|---|
| WS2812B | 5v | |
| WS2813 | 5v | |
| SK6812 | 5v | RGBW |
| APA102 | 5v | C/D |
| WS2801 | 5v | C/D |
| LPD8806 | 5v | C/D |
| TM1814 | 12v | RGBW |
| WS2811 | 12v | 3-LED segments |
| WS2815 | 12v | |
| GS8208 | 12v |
Licensed under the MIT license Credits here!
Uses Linearicons by Perxis!
Join the Discord server to discuss everything about WLED!
Check out the WLED Discourse forum!
You can also send me mails to [email protected], but please only do so if you want to talk to me privately.
If WLED really brightens up your every day, you can
Disclaimer: If you are prone to photo epileptic seizures, it is not recommended that you use this software. If you still want to try, DO NOT use strobe, lightning or noise modes or high effect-speed settings. As per the MIT license, I assume no liability for any damage to you or any other person or equipment.