• 6-channel-LED - fades 6 channels of LEDs with a for loop
• bitMasking - Bit masking to determine which bits of a byte are set.
• bitShifting - Bit shifting to move a bit through the positions in a byte
• DACAnalogWrite - Reads an analog input, uses it to set the voltage attached to the DAC on pin A0 of the SAMD-based boards.
• Emic2 - examples with the Emic2 Text to Speech generator
• EncoderAndButtonExample - reading a rotary encoder and its included pushbutton using Paul Stoffregen's Encoder library.
• EncoderExample - Many encoders change 4 steps per detent step. This sketch reads an encoder and prints the direction of change when it's been turned one detent step using Paul Stoffregen's Encoder library.
• EncoderLEDControl - Reads an encoder and its pushbutton and uses the changes to control an LED.
• EnergyTests
• InterruptibleFadeInterval
• InterruptibleFadeScheduler
• Intervals
• JsonExamples
• KeyboardMouseExamples
• LedChaser
• MKRBatteryChecks
• ParseInt
• RTCSleepingLogger
• SDCard_Examples
• ScreenExamples
• SerialNumericParser
• SineWaveDAC
• UnitTests
• VS1053_Sound_examples
• WeightedAverage
• joystick-imu