dlme-transform

Transforms raw DLME metadata from https://github.com/sul-dlss/dlme-metadata and uses transformations in traject_configs/ to create DLME intermediate representation documents in S3.

You can read more about our data and related documentation in our data documentation.

Docker

When there are commits to main, webhooks are set up for CircleCI to run tests, and if successful, build a docker image and publish that docker image to Docker Hub.

You can also do this manually (see below). You only need the local docker image to run tranforms locally; no need to publish the image to Docker Hub.

Build image

docker build --no-cache \
             --build-arg VCS_REF=`git rev-parse --short HEAD` \
             --build-arg VCS_URL=`git config --get remote.origin.url` \
             --build-arg BUILD_DATE=`date -u +"%Y-%m-%dT%H:%M:%SZ"` \
             . -t suldlss/dlme-transform:latest

Publish Docker Image to Docker Hub

docker push suldlss/dlme-transform:latest

Running Transforms

You can run transforms locally by getting DLME data from GitHub (assuming everything is update to date on the main branches):

docker run --rm -v $(pwd)/output:/opt/traject/output \
                suldlss/dlme-transform:latest \
                stanford/maps/data/kj751hs0595.mods

Optionally set the data dir in the environment:

docker run --rm -e DATA_PATH=stanford/maps/data/kj751hs0595.mods \
                -v $(pwd)/output:/opt/traject/output \
                suldlss/dlme-transform:latest

The output will appear in STDOUT inside the container and be written to /opt/traject/output. (In this example, /opt/traject/output inside the container is mounted from ./output outside the container, which will correspond to the 'output' subfolder in your locally cloned dlme-transform repo.)

For development purposes, instead of pulling harvested data to transform from GitHub, you can pull it in locally. This may be useful as you test Traject config changes before pushing them to GitHub. To do this, map in a local directory using the -v switch. Similarly, you can pull in local macros and translation maps.

Note: you should use your actual local directories in place of the two example directories below specified with the -v switch for data and output. In the example below, the dlme-metadata repository is cloned one directory up from the dlme-transform repository we are running from. Output will be written to the output subfolder of the dlme-transform repo (your current directory) as in the GitHub example above.

Instead of specifying a directory relative to the current directory (as in the example below), you could also specify an absolute path on your machine, like /Users/YourName/development/dlme-metadata. Be sure to specify the root of the checked out repositories in each case.

The traject configuration file used for a particular transform is triggered by the specified data directory. See "Configuring transforms" below.

docker run --rm -e SKIP_FETCH_DATA=true \
                -v $(pwd)/.:/opt/traject \
                -v $(pwd)/../dlme-metadata:/opt/airflow/working \
                -v $(pwd)/output:/opt/traject/output \
                -v $(pwd)/output:/opt/airflow/metadata \
                suldlss/dlme-transform:latest \
                stanford/maps/data/kj751hs0595.mods

To process multiple files, specify a directory instead of a single file. For example, stanford/maps instead of stanford/maps/data/kj751hs0595.mods. To transform everything, specify nothing.

docker run --rm -v $(pwd)/output:/opt/traject/output \
                suldlss/dlme-transform:latest

The -w switch can be used to debug transformations. It will stop the transform upon encountering an error.

docker run --rm -e SKIP_FETCH_DATA=true \
                -v $(pwd)/.:/opt/traject \
                -v $(pwd)/../dlme-metadata:/opt/airflow/working \
                -v $(pwd)/output:/opt/traject/output \
                -v $(pwd)/output:/opt/airflow/metadata \
                suldlss/dlme-transform:latest \
                stanford/maps/data/kj751hs0595.mods \
                -w

For more information on traject, read the documentation

Using dlme-transform in the deployed environments requires a DLME account with ? admin ? access so you can view the form here: https://spotlight.dev.dlmenetwork.org/transform .

Sending tranformation result to the review and prod servers

There are three environments–dev, review, and prod. The review and prod VMs have the same datashare mounted. Pushing data to that datashare directory requires that you are configured to login to the server and have kinit setup properly. If you have any questions/issues with your kinit setup, please check with the ops team in the #dlss-operations slack channel.

The airflow dev server stores the intermediate representation in a shared datashare location between airflow and the web app. After you have kinit-ed your account, you can see what files are in the datashare with ssh [email protected] and cd ../../opt/app/dlme/datashare. Use scp to copy the file to the dlme-airflow-dev server:

scp [~/Path/To/NDJson/File] [email protected]:/opt/app/dlme/datashare

To copy the file to your local directory, use

scp [email protected]:/opt/app/dlme/dlme-airflow/shared/source_data/file_path .

To copy the file to your local directory, use

scp [email protected]:/opt/app/dlme/dlme-airflow/shared/source_data/file_path .

The server is load balanced so there are -a and -b VMs

If the need arises to transfer data to the dev environment, you can do so with:

scp [~/Path/To/NDJson/File] [email protected]:/opt/app/dlme/datashare

Configuring transforms

Configuration for transforms is specified in config/metadata_mapping.json. For example:

[
  {
    "trajects": [
        "mods_config.rb",
        "stanford_mods_config.rb"
    ],
    "paths": [
      "stanford/maps"
    ],
    "extension": ".mods",
    "settings": {
      "agg_provider": "Stanford Libraries",
      "agg_data_provider": "Stanford Libraries",
      "inst_id": "stanford"
    }
  }
]

This specifies that mods_config.rb, followed by stanford_mods_config.rb is to be used for any files ending in .mods found in stanford/maps; multiple Traject configs may be applied to source data. settings are provided to the Traject indexer as additional settings.

extension is optional; the default is .xml.

Additional metadata mappings can be added to this file. In case a metadata file matches more than one configuration, the first one wins.

Sorting transform configs

To enhance readability of the transform configuration (config/metadata_mapping.json), a Rake task has been added. The task loads the contents of config/metadata_mapping.json into memory, sorts the array alphabetically (ascending, i.e., A-Z) by the first value in the mapping's paths array. This way, the mappings for AIMS and AUC will appear before those for Stanford and Princeton and it ought to be easier to locate mappings within the file.

Invoke it like so:

$ rake mappings:sort

Note that this task modifies config/metadata_mapping.json, and you will need to commit and push this via version control to persist the changes.

Deploying

dlme-transform is deployed by publishing an image to docker hub. CircleCI should automatically create a new latest image when new commits are pushed to main (i.e. merged PRs).
You can confirm this by looking for the successful "publish-latest" step completion https://circleci.com/gh/sul-dlss/dlme-transform or by looking for the timestamp on the latest image at Docker Hub: https://hub.docker.com/r/suldlss/dlme-transform/tags.

Airflow uses the latest docker image of dlme-transform. As dlme-transform is run as a docker-in-docker task only and not a standlone service, the tagged suldlss/dlme-transform:latest is always pulled from docker hub on launch.

See the dlss Terraform README: https://github.com/sul-dlss/terraform-aws

API Documentation

https://www.rubydoc.info/github/sul-dlss/dlme-transform

Transformation notes

Unmapped languages

For the cho_language and cho_edm_type fields, setting a default of NOT FOUND will cause validation to fail when an unmapped language is encountered. For example:

to_field 'cho_language', extract_xpath("#{record}/dc:language", ns: NS), first_only,
         strip, translation_map('not_found', 'marc_languages')

Testing

To run the code linter (Rubocop) and the test suite, including unit and integration tests, run:

In order to run the integration tests, you can clone the dlme-metadata repo into the data subfolder. All of the files except for .keep are git ignored, so they should not be re-added to the dlme-transform repo.

$ bundle exec rake

By default, test setup squelches any output that the code being tested sends to STDOUT and STDERR. DLME::Utils.logger output is still printed. This is because test output can be very verbose, especially when using all of dlme-metadata in the data dir, as is done for CI. The default behavior can make debugging failing tests easier, especially in CircleCI, where there's a size limit on browser display of test output.

If STDOUT or STDERR would be useful, output to each from the tests can be allowed by using env vars (independently or together).

$ bundle exec rspec # default, just the logger output
$ NO_SQUELCH_STDERR=1 bundle exec rspec # allow tests to print to STDERR (plus logger output)
$ NO_SQUELCH_STDOUT=1 bundle exec rspec # allow tests to print to STDOUT (plus logger output), can be very noisy if run over all metadata
$ NO_SQUELCH_STDERR=1 NO_SQUELCH_STDOUT=1 bundle exec rspec # everything