[xbus] access type identifier (tag signal)

CHANGELOG.md

@@ -29,6 +29,7 @@ mimpid = 0x01040312 -> Version 01.04.03.12 -> v1.4.3.12
 
 | Date | Version | Comment | Ticket |
 |:----:|:-------:|:--------|:------:|
+| 31.05.2024 | 1.9.9.6 | add "tag" signal to XBUS to provide additional access information (compatible to the AXI4 _ARPROT_ and _AWPROT_ signals) | [#917](https://github.com/stnolting/neorv32/pull/917) |
 | 30.05.2024 | 1.9.9.5 | :bug: fix uncached-vs-cached memory accesses (do not interrupt cache bursts by direct/uncached memory accesses) | [#915](https://github.com/stnolting/neorv32/pull/915) |
 | 29.05.2024 | 1.9.9.4 | Vivado IP block: add resizing ports for GPIOs, XIRQs and PWM; split size configuration for GPIO inputs and outputs | [#913](https://github.com/stnolting/neorv32/pull/913) |
 | 27.05.2024 | 1.9.9.3 | removed `XIRQ_TRIGGER_*` generics; XIRQ trigger type is now _programmable_ by dedicated configuration registers | [#911](https://github.com/stnolting/neorv32/pull/911) |

docs/datasheet/soc.adoc

@@ -86,15 +86,16 @@ Some interfaces (like the TWI and the 1-Wire bus) require tri-state drivers in t
 | `jtag_tdo_o`     |  1 | out |   -   | serial data output
 | `jtag_tms_i`     |  1 |  in | `'L'` | mode select
 5+^| **<<_processor_external_bus_interface_xbus>>**
-| `xbus_adr_o`     | 32 | out |   -   |  destination address
-| `xbus_dat_o`     | 32 | out |   -   |  read data
-| `xbus_we_o`      |  1 | out |   -   |  write enable ('0' = read transfer)
-| `xbus_sel_o`     |  4 | out |   -   |  byte enable
-| `xbus_stb_o`     |  1 | out |   -   |  strobe
-| `xbus_cyc_o`     |  1 | out |   -   |  valid cycle
-| `xbus_dat_i`     | 32 |  in | `'L'` |  write data
-| `xbus_ack_i`     |  1 |  in | `'L'` |  transfer acknowledge
-| `xbus_err_i`     |  1 |  in | `'L'` |  transfer error
+| `xbus_adr_o`     | 32 | out |   -   | destination address
+| `xbus_dat_o`     | 32 | out |   -   | read data
+| `xbus_tag_o`     |  3 | out |   -   | access tag
+| `xbus_we_o`      |  1 | out |   -   | write enable ('0' = read transfer)
+| `xbus_sel_o`     |  4 | out |   -   | byte enable
+| `xbus_stb_o`     |  1 | out |   -   | strobe
+| `xbus_cyc_o`     |  1 | out |   -   | valid cycle
+| `xbus_dat_i`     | 32 |  in | `'L'` | write data
+| `xbus_ack_i`     |  1 |  in | `'L'` | transfer acknowledge
+| `xbus_err_i`     |  1 |  in | `'L'` | transfer error
 5+^| **<<_stream_link_interface_slink>>**
 | `slink_rx_dat_i` | 32 |  in | `'L'` | RX data
 | `slink_rx_src_i` |  4 |  in | `'L'` | RX source routing information

docs/datasheet/soc_xbus.adoc

@@ -9,12 +9,13 @@
 |                         | neorv32_cache.vhd       | Generic cache module
 | Software driver files:  | none                    | _implicitly used_
 | Top entity ports:       | `xbus_adr_o`            | address output (32-bit)
-|                         | `xbus_dat_i`            | data input (32-bit)
 |                         | `xbus_dat_o`            | data output (32-bit)
+|                         | `xbus_tag_o`            | access tag (3-bit)
 |                         | `xbus_we_o`             | write enable (1-bit)
 |                         | `xbus_sel_o`            | byte enable (4-bit)
 |                         | `xbus_stb_o`            | bus strobe (1-bit)
 |                         | `xbus_cyc_o`            | valid cycle (1-bit)
+|                         | `xbus_dat_i`            | data input (32-bit)
 |                         | `xbus_ack_i`            | acknowledge (1-bit)
 |                         | `xbus_err_i`            | bus error (1-bit)
 | Configuration generics: | `XBUS_EN`               | enable external bus interface when `true`
@@ -94,6 +95,16 @@ by two cycles. Furthermore, all outgoing signals (like the address) will be kept
 being initiated.
 
 
+**Access Tag**
+
+The XBUS tag signal `xbus_tag_o(0)` provides additional information about the current access cycle.
+It compatible to the the AXI4 `ARPROT` and `AWPROT` signals.
+
+* `xbus_tag_o(0)` **P**: access is performed from **privileged** mode (machine-mode) when set
+* `xbus_tag_o(1)` **NS**: this bit is hardwired to `0` indicating a **secure** access
+* `xbus_tag_o(2)` **I**: access is an **instruction** fetch when set; access is a data access when cleared
+
+
 **External Bus Cache (X-CACHE)**
 
 The XBUS interface provides an optional internal cache that can be used to buffer processor-external accesses.

rtl/core/neorv32_package.vhd

@@ -29,7 +29,7 @@ package neorv32_package is
 
   -- Architecture Constants -----------------------------------------------------------------
   -- -------------------------------------------------------------------------------------------
-  constant hw_version_c : std_ulogic_vector(31 downto 0) := x"01090905"; -- hardware version
+  constant hw_version_c : std_ulogic_vector(31 downto 0) := x"01090906"; -- hardware version
   constant archid_c     : natural := 19; -- official RISC-V architecture ID
   constant XLEN         : natural := 32; -- native data path width
 
@@ -817,6 +817,7 @@ package neorv32_package is
       -- External bus interface (available if XBUS_EN = true) --
       xbus_adr_o     : out std_ulogic_vector(31 downto 0);
       xbus_dat_o     : out std_ulogic_vector(31 downto 0);
+      xbus_tag_o     : out std_ulogic_vector(2 downto 0);
       xbus_we_o      : out std_ulogic;
       xbus_sel_o     : out std_ulogic_vector(3 downto 0);
       xbus_stb_o     : out std_ulogic;

rtl/core/neorv32_top.vhd

@@ -148,6 +148,7 @@ entity neorv32_top is
     -- External bus interface (available if XBUS_EN = true) --
     xbus_adr_o     : out std_ulogic_vector(31 downto 0); -- address
     xbus_dat_o     : out std_ulogic_vector(31 downto 0); -- write data
+    xbus_tag_o     : out std_ulogic_vector(2 downto 0); -- access tag
     xbus_we_o      : out std_ulogic; -- read/write
     xbus_sel_o     : out std_ulogic_vector(3 downto 0); -- byte enable
     xbus_stb_o     : out std_ulogic; -- strobe
@@ -643,7 +644,7 @@ begin
     port map (
       clk_i    => clk_i,
       rstn_i   => rstn_sys,
-      a_lock_i => '0', -- no exclusive accesses for port A
+      a_lock_i => '0',        -- no exclusive accesses for port A
       a_req_i  => dcache_req, -- prioritized
       a_rsp_o  => dcache_rsp,
       b_req_i  => icache_req,
@@ -686,7 +687,7 @@ begin
     port map (
       clk_i    => clk_i,
       rstn_i   => rstn_sys,
-      a_lock_i => '0', -- no exclusive accesses for port A
+      a_lock_i => '0',      -- no exclusive accesses for port A
       a_req_i  => core_req, -- prioritized
       a_rsp_o  => core_rsp,
       b_req_i  => dma_req,
@@ -948,6 +949,7 @@ begin
         xbus_adr_o => xbus_adr_o,
         xbus_dat_i => xbus_dat_i,
         xbus_dat_o => xbus_dat_o,
+        xbus_tag_o => xbus_tag_o,
         xbus_we_o  => xbus_we_o,
         xbus_sel_o => xbus_sel_o,
         xbus_stb_o => xbus_stb_o,

rtl/core/neorv32_xbus.vhd

@@ -31,6 +31,7 @@ entity neorv32_xbus is
     xbus_adr_o : out std_ulogic_vector(31 downto 0); -- address
     xbus_dat_i : in  std_ulogic_vector(31 downto 0); -- read data
     xbus_dat_o : out std_ulogic_vector(31 downto 0); -- write data
+    xbus_tag_o : out std_ulogic_vector(2 downto 0); -- access tag
     xbus_we_o  : out std_ulogic; -- read/write
     xbus_sel_o : out std_ulogic_vector(3 downto 0); -- byte enable
     xbus_stb_o : out std_ulogic; -- strobe
@@ -122,6 +123,7 @@ begin
   xbus_sel_o <= bus_req.ben;
   xbus_stb_o <= bus_req.stb;
   xbus_cyc_o <= bus_req.stb or pending;
+  xbus_tag_o <= bus_req.src & '0' & bus_req.priv; -- instr/data, secure, privileged/unprivileged
 
   -- response gating --
   bus_rsp.data <= xbus_dat_i when (pending = '1') and (bus_rw = '0') else (others => '0'); -- no read-back if READ operation

rtl/system_integration/neorv32_vivado_ip.vhd

@@ -256,8 +256,9 @@ architecture neorv32_vivado_ip_rtl of neorv32_vivado_ip is
     adr : std_ulogic_vector(31 downto 0);
     di  : std_ulogic_vector(31 downto 0);
     do  : std_ulogic_vector(31 downto 0);
+    tag : std_ulogic_vector(2 downto 0);
     we  : std_ulogic;
-    sel : std_ulogic_vector(03 downto 0);
+    sel : std_ulogic_vector(3 downto 0);
     cyc : std_ulogic;
     ack : std_ulogic;
     err : std_ulogic;
@@ -382,12 +383,13 @@ begin
     jtag_tms_i     => jtag_tms_i,
     -- External bus interface (available if XBUS_EN = true) --
     xbus_adr_o     => wb_core.adr,
-    xbus_dat_i     => wb_core.di,
     xbus_dat_o     => wb_core.do,
+    xbus_tag_o     => wb_core.tag,
     xbus_we_o      => wb_core.we,
     xbus_sel_o     => wb_core.sel,
     xbus_stb_o     => open,
     xbus_cyc_o     => wb_core.cyc,
+    xbus_dat_i     => wb_core.di,
     xbus_ack_i     => wb_core.ack,
     xbus_err_i     => wb_core.err,
     -- Stream Link Interface (available if IO_SLINK_EN = true) --
@@ -495,25 +497,19 @@ begin
       axi_wadr_received <= '0';
       axi_wdat_received <= '0';
     elsif rising_edge(clk) then
-      if (wb_core.cyc = '0') then -- idle
+      if (wb_core.cyc = '0') then
         axi_radr_received <= '0';
         axi_wadr_received <= '0';
         axi_wdat_received <= '0';
-      else -- busy
-        -- "read address received" flag --
-        if (wb_core.we = '0') then -- pending READ
+      else -- pending access
+        if (wb_core.we = '0') then -- read
           if (m_axi_arready = '1') then -- read address received by interconnect?
             axi_radr_received <= '1';
           end if;
-        end if;
-        -- "write address received" flag --
-        if (wb_core.we = '1') then -- pending WRITE
+        else -- write
           if (m_axi_awready = '1') then -- write address received by interconnect?
             axi_wadr_received <= '1';
           end if;
-        end if;
-        -- "write data received" flag --
-        if (wb_core.we = '1') then -- pending WRITE
           if (m_axi_wready = '1') then -- write data received by interconnect?
             axi_wdat_received <= '1';
           end if;
@@ -526,7 +522,7 @@ begin
   -- read address channel --
   m_axi_araddr  <= wb_core.adr;
   m_axi_arvalid <= wb_core.cyc and (not wb_core.we) and (not axi_radr_received);
-  m_axi_arprot  <= "000";
+  m_axi_arprot  <= wb_core.tag;
 
   -- read data channel --
   m_axi_rready  <= wb_core.cyc and (not wb_core.we);
@@ -535,7 +531,7 @@ begin
   -- write address channel --
   m_axi_awaddr  <= wb_core.adr;
   m_axi_awvalid <= wb_core.cyc and wb_core.we and (not axi_wadr_received);
-  m_axi_awprot  <= "000";
+  m_axi_awprot  <= wb_core.tag;
 
   -- write data channel --
   m_axi_wdata   <= wb_core.do;

sim/neorv32_tb.vhd

@@ -295,6 +295,7 @@ begin
     -- External bus interface (available if XBUS_EN = true) --
     xbus_adr_o     => wb_cpu.addr,     -- address
     xbus_dat_o     => wb_cpu.wdata,    -- write data
+    xbus_tag_o     => open,            -- access tag
     xbus_we_o      => wb_cpu.we,       -- read/write
     xbus_sel_o     => wb_cpu.sel,      -- byte enable
     xbus_stb_o     => wb_cpu.stb,      -- strobe

sim/simple/neorv32_tb.simple.vhd

@@ -271,6 +271,7 @@ begin
     -- External bus interface (available if XBUS_EN = true) --
     xbus_adr_o     => wb_cpu.addr,     -- address
     xbus_dat_o     => wb_cpu.wdata,    -- write data
+    xbus_tag_o     => open,            -- access tag
     xbus_we_o      => wb_cpu.we,       -- read/write
     xbus_sel_o     => wb_cpu.sel,      -- byte enable
     xbus_stb_o     => wb_cpu.stb,      -- strobe