Update readme.md

Syntax / grammar edits

usermods/usermod_v2_word_clock/readme.md

@@ -1,32 +1,32 @@
 # Word Clock Usermod V2
 
-This usermod can be used to drive a wordclock with a 11x10 pixel matrix with WLED. There are also 4 additional dots for the minutes. 
-The visualisation is desribed in 4 mask with LED numbers (single dots for minutes, minutes, hours and "clock/Uhr"). The index of the LEDs in the masks always starts with the index 0, even if the ledOffset is not 0.
-There are 3 parameters to change the behaviour:
+This usermod drives an 11x10 pixel matrix wordclock with WLED. There are 4 additional dots for the minutes. 
+The visualisation is described by 4 masks with LED numbers (single dots for minutes, minutes, hours and "clock"). The index of the LEDs in the masks always starts at 0, even if the ledOffset is not 0.
+There are 3 parameters that control behavior:
 
 active: enable/disable usermod
 diplayItIs: enable/disable display of "Es ist" on the clock
 ledOffset: number of LEDs before the wordclock LEDs
 
 ### Update for alternatative wiring pattern
 Based on this fantastic work I added an alternative wiring pattern.
-For original you have to use a long wire to connect DO - DI from first line to the next line.
+The original used a long wire to connect DO to DI, from one line to the next line.
 
-I wired my clock in meander style. So the first LED in second line is in the right.
-With this problem every second line was inverted and showed the wrong letter.
+I wired my clock in meander style. So the first LED in the second line is on the right.
+With this method, every other line was inverted and showed the wrong letter.
 
-I added a switch in usermod called "meander wiring?" to enable/disable alternativ wiring pattern.
+I added a switch in usermod called "meander wiring?" to enable/disable the alternate wiring pattern.
 
 
 ## Installation
 
 Copy and update the example `platformio_override.ini.sample` 
-from the Rotary Encoder UI usermode folder to the root directory of your particular build.
+from the Rotary Encoder UI usermod folder to the root directory of your particular build.
 This file should be placed in the same directory as `platformio.ini`.
 
 ### Define Your Options
 
-* `USERMOD_WORDCLOCK`   - define this to have this the Auto Save usermod included wled00\usermods_list.cpp
+* `USERMOD_WORDCLOCK`   - define this to have this usermod included wled00\usermods_list.cpp
 
 ### PlatformIO requirements