Clean up feature supported

sparkfun · Jul 12, 2024 · ccd51fb · ccd51fb
1 parent 562eb5a
commit ccd51fb
Show file tree

Hide file tree

Showing 8 changed files with 14 additions and 12 deletions.
diff --git a/docs/configure_with_ethernet.md b/docs/configure_with_ethernet.md
@@ -1,6 +1,6 @@
 # Configure with Ethernet
 
-Torch: ![Feature Supported](img/Icons/RedDot.png) / EVK: ![Feature Supported](img/Icons/GreenDot.png)
+Torch: ![Feature Not Supported](img/Icons/RedDot.png) / EVK: ![Feature Supported](img/Icons/GreenDot.png)
 
 During Ethernet configuration, the RTK device will present a webpage that is viewable from a desktop/laptop connected to the local network.
 

diff --git a/docs/correction_sources.md b/docs/correction_sources.md
@@ -54,7 +54,7 @@ The [PointPerfect](https://www.u-blox.com/en/pointperfect-service-coverage) and
 
 ## Galileo HAS
 
-Torch: ![Feature Supported](img/Icons/GreenDot.png)
+Torch: ![Feature Supported](img/Icons/GreenDot.png) / EVK: ![Feature Not Supported](img/Icons/RedDot.png)
 
 The European Union launched a free correction service called [High Accuracy Service](https://www.gsc-europa.eu/galileo/services/galileo-high-accuracy-service-has) or **HAS** starting in 2023. The service is delivered over the E6 frequency. In general, this service will greatly improve accuracy to receivers but is lower accuracy than an OSR or SSR-based RTK Fix. Additionally, a receiver can take up to 5 minutes to benefit from these corrections (convergence time is larger), as opposed to OSR (seconds) or SSR (~180 seconds) to achieve maximum accuracy. But HAS is free! And available with very little additional configuration.
 

diff --git a/docs/correction_transport.md b/docs/correction_transport.md
@@ -34,7 +34,7 @@ Cellular can even be used in Base mode. We have seen some very inventive users u
 
 ## Cellular - Built-In
 
-Torch: ![Feature Supported](img/Icons/RedDot.png) / EVK: ![Feature Supported](img/Icons/RedDot.png)
+Torch: ![Feature Not Supported](img/Icons/RedDot.png) / EVK: ![Feature Supported](img/Icons/RedDot.png)
 
 The RTK EVK has built-in cellular via a u-blox LARA-R6001D. However, the RTK Everywhere firmware does not yet support cellular. Adding it is on our roadmap. Stay tuned for updates! Meanwhile, we do have a stand-alone EVK code example which will connect to PointPerfect localized distribution via cellular:
 

diff --git a/docs/firmware_update.md b/docs/firmware_update.md
@@ -99,7 +99,7 @@ If your RTK 'freezes' after the update, press ```Reset ESP32``` to get it going
 
 ## Updating Firmware From the SD Card
 
-Torch: ![Feature Not Supported](img/Icons/RedDot.png) 
+Torch: ![Feature Not Supported](img/Icons/RedDot.png) / EVK: ![Feature Supported](img/Icons/GreenDot.png)
 
 On devices that support it, the firmware can be loaded from an SD card.
 
@@ -173,7 +173,7 @@ Upon completion, your RTK device will reset.
 
 ## Updating u-blox Firmware
 
-Torch: ![Feature Not Supported](img/Icons/RedDot.png) 
+Torch: ![Feature Not Supported](img/Icons/RedDot.png) / EVK: ![Feature Supported](img/Icons/GreenDot.png)
 
 The following products contain the following u-blox receivers:
 
@@ -243,6 +243,8 @@ As of writing, no additional releases of the NEO-D9S firmware have been made.
 
 ## Updating UM980 Firmware
 
+Torch: ![Feature Supported](img/Icons/GreenDot.png) / EVK: ![Feature Not Supported](img/Icons/RedDot.png)
+
 1. Download the latest UM980 firmware. As of writing, the UM980 firmware is [v11833](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Torch/main/UM980_Firmware/UM980_R4.10Build11833.pkg). See the [RTK Torch repo](https://github.com/sparkfun/SparkFun_RTK_Torch) for the latest firmware.
 
 2. Download and install [UPrecise](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Torch/main/UM980_Firmware/uprecise-v2-0.exe). UPrecise is the software created by Unicore to configure and view output from Unicore GNSS modules. v2 of the software can be downloaded [here](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Torch/main/UM980_Firmware/uprecise-v2-0.exe) but newer versions may be available.
@@ -293,9 +295,9 @@ The SparkFun RTK Everywhere Firmware is compiled using Arduino CLI (currently [v
 
 2. Install the ESP32 core for Arduino:
 
-        arduino-cli core install esp32:esp32@2.0.11
+        arduino-cli core install esp32:esp32@3.0.1
 
-**Note**: Use v2.0.11 of the core. 
+**Note**: Use v3.0.1 of the core. 
 
 **Note:** We use the 'ESP32 Dev Module' for pin numbering. 
 
@@ -305,7 +307,7 @@ The SparkFun RTK Everywhere Firmware is compiled using Arduino CLI (currently [v
 
 5. Add *RTKEverywhere.csv* partition table to the Arduino partitions folder. It should look something like
 
-        C:\Users\\[user name]\AppData\Local\Arduino15\packages\esp32\hardware\esp32\2.0.11\tools\partitions\RTKEverywhere.csv
+        C:\Users\\[user name]\AppData\Local\Arduino15\packages\esp32\hardware\esp32\3.0.1\tools\partitions\RTKEverywhere.csv
 
     This will increase the program partitions, as well as the SPIFFs partition to utilize the full 16MB of flash.
 

diff --git a/docs/menu_data_logging.md b/docs/menu_data_logging.md
@@ -1,6 +1,6 @@
 # Data Logging Menu
 
-Torch: ![Feature Supported](img/Icons/RedDot.png) / EVK: ![Feature Supported](img/Icons/GreenDot.png)
+Torch: ![Feature Not Supported](img/Icons/RedDot.png) / EVK: ![Feature Supported](img/Icons/GreenDot.png)
 
 **Note:** Not all devices support external SD (ie, RTK Torch). This section applies only to devices that support an external SD card, and have one inserted.
 

diff --git a/docs/menu_ports.md b/docs/menu_ports.md
@@ -1,6 +1,6 @@
 # Ports Menu
 
-Torch: ![Feature Partially Supported](img/Icons/YellowDot.png) / EVK: ![Feature Supported](img/Icons/YellowDot.png)
+Torch: ![Feature Partially Supported](img/Icons/YellowDot.png) / EVK: ![Feature Partially Supported](img/Icons/YellowDot.png)
 
 ![Setting the baud rate of the ports](<img/WiFi Config/RTK_Surveyor_-_WiFi_Config_-_Express_Ports_Config.jpg>)
 

diff --git a/docs/menu_tilt.md b/docs/menu_tilt.md
@@ -1,6 +1,6 @@
 # Tilt Compensation Menu
 
-Torch: ![Feature Supported](img/Icons/GreenDot.png) / EVK: ![Feature Supported](img/Icons/RedDot.png)
+Torch: ![Feature Supported](img/Icons/GreenDot.png) / EVK: ![Feature Not Supported](img/Icons/RedDot.png)
 
 ![Tilt Compensation menu](<img/Terminal/SparkFun RTK Everywhere - Tilt Menu.png>)
 

diff --git a/docs/repair.md b/docs/repair.md
@@ -1,6 +1,6 @@
 # Disassembly / Repair
 
-Torch: ![Feature Partially Supported](img/Icons/YellowDot.png) / EVK: ![Feature Supported](img/Icons/RedDot.png)
+Torch: ![Feature Partially Supported](img/Icons/YellowDot.png) / EVK: ![Feature Not Supported](img/Icons/RedDot.png)
 
 The RTK product line is fully open-source hardware. This allows users to view schematics, code, and repair manuals. This section documents how to safely disassemble the RTK Facet and Torch.