Add bgp container with gobgp (#358)

* Add go-1.7 into docker-slave

* Create container docker-fpm-gobgp with gobgpd inside

dockers/docker-fpm-gobgp/Dockerfile.j2

@@ -0,0 +1,31 @@
+FROM docker-fpm
+
+## Make apt-get non-interactive
+ENV DEBIAN_FRONTEND=noninteractive
+
+RUN apt-get update && apt-get install -y supervisor
+
+COPY \
+{% for deb in docker_fpm_gobgp_debs.split(' ') -%}
+debs/{{ deb }}{{' '}}
+{%- endfor -%}
+debs/
+
+RUN dpkg -i \
+{% for deb in docker_fpm_gobgp_debs.split(' ') -%}
+debs/{{ deb }}{{' '}}
+{%- endfor %}
+
+## Clean up
+RUN apt-get clean -y; apt-get autoclean -y; apt-get autoremove -y
+RUN rm -rf /debs
+
+COPY ["*.j2", "/usr/share/sonic/templates/"]
+COPY ["start.sh", "config.sh", "/usr/bin/"]
+COPY ["daemons", "/etc/quagga/"]
+COPY supervisord.conf /etc/supervisor/conf.d/supervisord.conf
+
+ENTRYPOINT /usr/bin/config.sh   \
+        && /usr/bin/start.sh    \
+        && /usr/bin/supervisord \
+        && /bin/bash

dockers/docker-fpm-gobgp/config.sh

@@ -0,0 +1,17 @@
+#!/bin/bash
+
+mkdir -p /etc/quagga
+sonic-cfggen -m /etc/sonic/minigraph.xml -t /usr/share/sonic/templates/gobgpd.conf.j2 >/etc/gobgp/gobgpd.conf
+sonic-cfggen -m /etc/sonic/minigraph.xml -t /usr/share/sonic/templates/zebra.conf.j2 >/etc/quagga/zebra.conf
+
+sonic-cfggen -m /etc/sonic/minigraph.xml -t /usr/share/sonic/templates/isolate.j2 >/usr/sbin/bgp-isolate
+chown root:root /usr/sbin/bgp-isolate
+chmod 0755 /usr/sbin/bgp-isolate
+
+sonic-cfggen -m /etc/sonic/minigraph.xml -t /usr/share/sonic/templates/unisolate.j2 >/usr/sbin/bgp-unisolate
+chown root:root /usr/sbin/bgp-unisolate
+chmod 0755 /usr/sbin/bgp-unisolate
+
+mkdir -p /var/sonic
+echo "# Config files managed by sonic-config-engine" >/var/sonic/config_status
+

dockers/docker-fpm-gobgp/daemons

@@ -0,0 +1,31 @@
+# This file tells the quagga package which daemons to start.
+#
+# Entries are in the format: <daemon>=(yes|no|priority)
+#   0, "no"  = disabled
+#   1, "yes" = highest priority
+#   2 .. 10  = lower priorities
+# Read /usr/share/doc/quagga/README.Debian for details.
+#
+# Sample configurations for these daemons can be found in
+# /usr/share/doc/quagga/examples/.
+#
+# ATTENTION: 
+#
+# When activation a daemon at the first time, a config file, even if it is
+# empty, has to be present *and* be owned by the user and group "quagga", else
+# the daemon will not be started by /etc/init.d/quagga. The permissions should
+# be u=rw,g=r,o=.
+# When using "vtysh" such a config file is also needed. It should be owned by
+# group "quaggavty" and set to ug=rw,o= though. Check /etc/pam.d/quagga, too.
+#
+# The watchquagga daemon is always started. Per default in monitoring-only but
+# that can be changed via /etc/quagga/debian.conf.
+#
+zebra=yes
+bgpd=no
+ospfd=no
+ospf6d=no
+ripd=no
+ripngd=no
+isisd=no
+babeld=no

dockers/docker-fpm-gobgp/gobgpd.conf.j2

@@ -0,0 +1,28 @@
+[global.config]
+  as = {{ minigraph_bgp_asn }}
+  router-id = "{{ minigraph_lo_interfaces[0]['addr'] }}"
+{% for bgp_session in minigraph_bgp %}
+{% if bgp_session['asn'] != 0 %}
+[[neighbors]]
+  [neighbors.config]
+    peer-as = {{ bgp_session['asn'] }}
+    neighbor-address = "{{ bgp_session['addr'] }}"
+  [neighbors.graceful-restart.config]
+    enabled = true
+  [[neighbors.afi-safis]]
+    [neighbors.afi-safis.config]
+{% if bgp_session['addr'] | ipv6 %}
+      afi-safi-name = "ipv6-unicast"
+{% else %}
+      afi-safi-name = "ipv4-unicast"
+{% endif %}
+    [neighbors.afi-safis.mp-graceful-restart.config]
+      enabled = true
+{% endif %}
+{% endfor %}
+[zebra]
+    [zebra.config]
+        enabled = true
+        url = "unix:/var/run/quagga/zserv.api"
+        redistribute-route-type-list = ["connect"]
+

dockers/docker-fpm-gobgp/isolate.j2

@@ -0,0 +1,24 @@
+#!/bin/bash
+
+echo Not implemented yet
+exit
+
+## vtysh only accepts script in stdin, so cannot be directly used in shebang
+## Cut the tail of this script and feed vtysh stdin
+sed -n -e '9,$p' < "$0" | vtysh "$@"
+## Exit with vtysh return code
+exit $?
+
+## vtysh script start from next line, which line number MUST eqaul in 'sed' command above
+
+configure terminal
+  router bgp {{ minigraph_bgp_asn }}
+{% for bgp_session in minigraph_bgp %}
+    neighbor {{ bgp_session['addr'] }} route-map ISOLATE out
+{% endfor %}
+  exit
+exit
+
+{% for bgp_session in minigraph_bgp %}
+clear ip bgp {{ bgp_session['addr'] }} soft out
+{% endfor %}

dockers/docker-fpm-gobgp/start.sh

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+service rsyslog start
+service quagga start
+fpmsyncd &

dockers/docker-fpm-gobgp/supervisord.conf

@@ -0,0 +1,6 @@
+[supervisord]
+nodaemon=true
+
+[program:gobgpd]
+command=/usr/sbin/gobgpd -p -f /etc/gobgp/gobgpd.conf -r
+priority=1

dockers/docker-fpm-gobgp/unisolate.j2

@@ -0,0 +1,24 @@
+#!/bin/bash
+
+echo Not implemented yet
+exit
+
+## vtysh only accepts script in stdin, so cannot be directly used in shebang
+## Cut the tail of this script and feed vtysh stdin
+sed -n -e '9,$p' < "$0" | vtysh "$@"
+## Exit with vtysh return code
+exit $?
+
+## vtysh script start from next line, which line number MUST eqaul in 'sed' command above
+
+configure terminal
+  router bgp {{ minigraph_bgp_asn }}
+{% for bgp_session in minigraph_bgp %}
+    no neighbor {{ bgp_session['addr'] }} route-map ISOLATE out
+{% endfor %}
+  exit
+exit
+
+{% for bgp_session in minigraph_bgp %}
+clear ip bgp {{ bgp_session['addr'] }} soft out
+{% endfor %}

dockers/docker-fpm-gobgp/zebra.conf.j2

@@ -0,0 +1,61 @@
+!
+{% block banner %}
+! =========== Managed by sonic-cfggen DO NOT edit manually! ====================
+! generated by templates/quagga/zebra.conf.j2 using minigraph_facts.py
+! file: zebra.conf
+!
+{% endblock banner %}
+!
+{% block sys_init %}
+hostname {{ inventory_hostname }}
+password zebra
+enable password zebra
+{% endblock sys_init %}
+!
+{% block interfaces %}
+! Enable link-detect (default disabled)
+{% for interface in minigraph_interfaces %}
+interface {{ interface['alias'] }}
+link-detect
+!
+{% endfor %}
+{% endblock interfaces %}
+!
+{% block default_route %}
+! set static default route to mgmt gateway as a backup to learned default
+ip route 0.0.0.0/0 {{ minigraph_mgmt_interface['gwaddr'] }} 200
+{% endblock default_route %}
+!
+{% block source_loopback %}
+! Set ip source to loopback for bgp learned routes
+route-map RM_SET_SRC permit 10
+    set src {{ minigraph_lo_interfaces[0]['addr'] }}
+!
+{% set lo_ipv6_addrs = [] %}
+{% if minigraph_lo_interfaces is defined %}
+{%   for interface in minigraph_lo_interfaces %}
+{%     if interface['addr'] is defined and interface['addr']|ipv6 %}
+{%       if lo_ipv6_addrs.append(interface['addr']) %}
+{%       endif %}
+{%     endif %}
+{%   endfor %}
+{% endif %}
+{% if lo_ipv6_addrs|length > 0 %} 
+route-map RM_SET_SRC6 permit 10
+    set src {{ lo_ipv6_addrs[0] }}
+!
+{% endif %}
+ip protocol bgp route-map RM_SET_SRC
+!
+{% if lo_ipv6_addrs|length > 0 %}
+ipv6 protocol bgp route-map RM_SET_SRC6
+!
+{% endif %}
+{% endblock source_loopback %}
+!
+{% block logging %}
+log syslog informational
+log facility local4
+{% endblock logging %}
+!
+

rules/docker-fpm-gobgp.mk

@@ -0,0 +1,14 @@
+# docker image for fpm-gobgp
+
+DOCKER_FPM_GOBGP = docker-fpm-gobgp.gz
+$(DOCKER_FPM_GOBGP)_PATH = $(DOCKERS_PATH)/docker-fpm-gobgp
+$(DOCKER_FPM_GOBGP)_DEPENDS += $(GOBGP)
+$(DOCKER_FPM_GOBGP)_LOAD_DOCKERS += $(DOCKER_FPM)
+SONIC_DOCKER_IMAGES += $(DOCKER_FPM_GOBGP)
+SONIC_INSTALL_DOCKER_IMAGES += $(DOCKER_FPM_GOBGP)
+
+$(DOCKER_FPM_GOBGP)_CONTAINER_NAME = bgp
+$(DOCKER_FPM_GOBGP)_RUN_OPT += --net=host --privileged -t
+$(DOCKER_FPM_GOBGP)_RUN_OPT += --volumes-from database
+$(DOCKER_FPM_GOBGP)_RUN_OPT += -v /etc/sonic:/etc/sonic:ro
+

rules/gobgp.mk

@@ -0,0 +1,5 @@
+# gobgp package
+
+GOBGP = gobgp_1.16-01_amd64.deb
+$(GOBGP)_SRC_PATH = $(SRC_PATH)/gobgp
+SONIC_DPKG_DEBS += $(GOBGP)

sonic-slave/Dockerfile

@@ -6,6 +6,7 @@ RUN echo "deb http://debian-archive.trafficmanager.net/debian/ jessie main contr
 RUN echo "deb-src http://debian-archive.trafficmanager.net/debian/ jessie main contrib non-free" >> /etc/apt/sources.list
 RUN echo "deb http://debian-archive.trafficmanager.net/debian-security/ jessie/updates main contrib non-free" >> /etc/apt/sources.list
 RUN echo "deb-src http://debian-archive.trafficmanager.net/debian-security/ jessie/updates main contrib non-free" >> /etc/apt/sources.list
+RUN echo 'deb http://debian-archive.trafficmanager.net/debian jessie-backports main' >> /etc/apt/sources.list
 
 ## Make apt-get non-interactive
 ENV DEBIAN_FRONTEND=noninteractive
@@ -70,6 +71,9 @@ RUN apt-get update && apt-get install -y dkms
 # For python3.5 build
 RUN apt-get update && apt-get install -y sharutils libncursesw5-dev libbz2-dev liblzma-dev libgdbm-dev tk-dev blt-dev libmpdec-dev libbluetooth-dev locales libsqlite3-dev libgpm2 time net-tools xvfb python-sphinx python3-sphinx
 
+# For gobgp build
+RUN apt-get -yt jessie-backports install golang-go
+
 RUN mkdir /var/run/sshd
 EXPOSE 22
 

src/gobgp/Makefile

@@ -0,0 +1,23 @@
+export GOPATH=/tmp/go
+
+INSTALL := /usr/bin/install
+
+all: gobgp gobgpd
+
+gobgpd:
+	go get -v github.com/osrg/gobgp/gobgpd
+
+gobgp:
+	go get -v github.com/osrg/gobgp/gobgp
+
+install:
+	$(INSTALL) -D ${GOPATH}/bin/gobgp $(DESTDIR)/usr/bin/gobgp
+	$(INSTALL) -D ${GOPATH}/bin/gobgpd $(DESTDIR)/usr/sbin/gobgpd
+	$(INSTALL) -D gobgpd.conf.sample $(DESTDIR)/etc/gobgp/gobgpd.conf.sample
+
+deinstall:
+	rm $(DESTDIR)/usr/bin/gobgp
+	rm $(DESTDIR)/usr/sbin/gobgpd
+
+clean:
+	rm -fr ${GOPATH}

src/gobgp/debian/changelog

@@ -0,0 +1,5 @@
+gobgp (1.16-01) UNRELEASED; urgency=low
+
+  * Initial release.
+
+ -- Pavel Shirshov <[email protected]>  Sat, 25 Feb 2017 00:25:19 +0000

src/gobgp/debian/compat

@@ -0,0 +1 @@
+9

src/gobgp/debian/control

@@ -0,0 +1,12 @@
+Source: gobgp
+Maintainer: Pavel Shirshov <[email protected]>
+Build-Depends: debhelper (>= 8.0.0),
+               dh-systemd
+Standards-Version: 3.9.3
+Section: net
+
+Package: gobgp
+Priority: extra  
+Architecture: amd64
+Depends: ${shlibs:Depends}, ${misc:Depends}  
+Description: gobgp BGP daemon

src/gobgp/debian/gobgp.dirs

@@ -0,0 +1 @@
+etc/gobgp

src/gobgp/debian/gobgp.init.d

@@ -0,0 +1,50 @@
+#!/bin/bash
+#
+### BEGIN INIT INFO
+# Provides: gobgp
+# Required-Start: $local_fs $network $remote_fs $syslog
+# Required-Stop: $local_fs $network $remote_fs $syslog
+# Default-Start:  2 3 4 5
+# Default-Stop: 0 1 6
+# Short-Description: start and stop the gobgpd
+# Description: gobgpd is an implementation of bgp daemon in Go
+### END INIT INFO
+#
+
+PATH=/bin:/usr/bin:/sbin:/usr/sbin
+D_PATH=/usr/sbin
+C_PATH=/etc/gobgp
+
+. /lib/lsb/init-functions
+
+#########################################################
+#               Main program                            #
+#########################################################
+
+case "$1" in
+    start)
+        if [ -f /etc/gobgp/gobgpd.conf ]
+        then
+          /usr/sbin/gobgpd -f /etc/gobgp/gobgpd.conf -r
+          echo $! > /var/run/gobgpd.pid
+        else
+          echo /etc/gobgp/gobgpd.conf not found
+        fi
+        ;;
+
+    stop)
+        kill -9 $(echo /var/run/gobgpd.pid)
+        ;;
+
+    restart|force-reload)
+        $0 stop $2
+        sleep 1
+        $0 start $2
+        ;;
+    *)
+        echo "Usage: /etc/init.d/gobgp {start|stop|restart|force-reload}"
+        exit 1
+        ;;
+esac
+
+exit 0

src/gobgp/debian/gobgp.service

@@ -0,0 +1,16 @@
+[Unit]
+Description=gobgp service
+After=network.target
+ConditionPathExists=/etc/gobgp/gobgpd.yml
+
+[Service]
+EnvironmentFile=-/etc/default/gobgp
+ExecStart=/usr/sbin/gobgpd $DAEMON_ARGS
+#ExecReload=/bin/kill -HUP $MAINPID
+KillMode=process
+Restart=on-failure
+
+[Install]
+WantedBy=multi-user.target
+Alias=gobgpd.service
+

src/gobgp/debian/rules

@@ -0,0 +1,3 @@
+#!/usr/bin/make -f  
+%:  
+	dh $@ --with systemd