[sfputil] Firmware download/upgrade CLI support for QSFP-DD (#1947)

* Firmware download/upgrade CLI support for QSFP-DD

Signed-off-by: Prince George <[email protected]>

sfputil/main.py

@@ -9,6 +9,8 @@
 import sys
 import natsort
 import ast
+import time
+import datetime
 
 import subprocess
 import click
@@ -26,12 +28,20 @@
 PLATFORM_JSON = 'platform.json'
 PORT_CONFIG_INI = 'port_config.ini'
 
+EXIT_FAIL = -1
+EXIT_SUCCESS = 0
 ERROR_PERMISSIONS = 1
 ERROR_CHASSIS_LOAD = 2
 ERROR_SFPUTILHELPER_LOAD = 3
 ERROR_PORT_CONFIG_LOAD = 4
 ERROR_NOT_IMPLEMENTED = 5
 ERROR_INVALID_PORT = 6
+SMBUS_BLOCK_WRITE_SIZE = 32
+# Default host password as per CMIS spec:
+# http://www.qsfp-dd.com/wp-content/uploads/2021/05/CMIS5p0.pdf
+CDB_DEFAULT_HOST_PASSWORD = 0x00001011
+
+MAX_LPL_FIRMWARE_BLOCK_SIZE = 116 #Bytes
 
 # TODO: We should share these maps and the formatting functions between sfputil and sfpshow
 QSFP_DATA_MAP = {
@@ -225,6 +235,17 @@
 # Global logger instance
 log = logger.Logger(SYSLOG_IDENTIFIER)
 
+def is_sfp_present(port_name):
+    physical_port = logical_port_to_physical_port_index(port_name)
+    sfp = platform_chassis.get_sfp(physical_port)
+
+    try:
+        presence = sfp.get_presence()
+    except NotImplementedError:
+        click.echo("sfp get_presence() NOT implemented!", err=True)
+        sys.exit(ERROR_NOT_IMPLEMENTED)
+
+    return bool(presence)
 
 # ========================== Methods for formatting output ==========================
 
@@ -409,6 +430,19 @@ def logical_port_name_to_physical_port_list(port_name):
     else:
         return [int(port_name)]
 
+def logical_port_to_physical_port_index(port_name):
+    if not platform_sfputil.is_logical_port(port_name):
+        click.echo("Error: invalid port '{}'\n".format(port_name))
+        print_all_valid_port_values()
+        sys.exit(ERROR_INVALID_PORT)
+
+    physical_port = logical_port_name_to_physical_port_list(port_name)[0]
+    if physical_port is None:
+        click.echo("Error: No physical port found for logical port '{}'".format(port_name))
+        sys.exit(EXIT_FAIL)
+
+    return physical_port
+
 
 def print_all_valid_port_values():
     click.echo("Valid values for port: {}\n".format(str(platform_sfputil.logical)))
@@ -806,6 +840,37 @@ def lpmode(port):
 
     click.echo(tabulate(output_table, table_header, tablefmt='simple'))
 
+def show_firmware_version(physical_port):
+    try:
+        sfp = platform_chassis.get_sfp(physical_port)
+        api = sfp.get_xcvr_api()
+        out = api.get_module_fw_info()
+        click.echo(out['info'])
+    except NotImplementedError:
+        click.echo("This functionality is currently not implemented for this platform")
+        sys.exit(ERROR_NOT_IMPLEMENTED)
+
+# 'fwversion' subcommand
+@show.command()
+@click.argument('port_name', metavar='<port_name>', required=True)
+def fwversion(port_name):
+    """Show firmware version of the transceiver"""
+
+    physical_port = logical_port_to_physical_port_index(port_name)
+    sfp = platform_chassis.get_sfp(physical_port)
+
+    try:
+        presence = sfp.get_presence()
+    except NotImplementedError:
+        click.echo("sfp get_presence() NOT implemented!")
+        sys.exit(EXIT_FAIL)
+
+    if not presence:
+        click.echo("{}: SFP EEPROM not detected\n".format(port_name))
+        sys.exit(EXIT_FAIL)
+
+    show_firmware_version(physical_port)
+    sys.exit(EXIT_SUCCESS)
 
 # 'lpmode' subgroup
 @cli.group()
@@ -904,6 +969,265 @@ def reset(port_name):
 
         i += 1
 
+# 'firmware' subgroup
+@cli.group()
+def firmware():
+    """Download/Upgrade firmware on the transceiver"""
+    pass
+
+def run_firmware(port_name, mode):
+    """
+        Make the inactive firmware as the current running firmware
+        @port_name:
+        @mode: 0, 1, 2, 3 different modes to run the firmware
+        Returns 1 on success, and exit_code = -1 on failure
+    """
+    status = 0
+    physical_port = logical_port_to_physical_port_index(port_name)
+    sfp = platform_chassis.get_sfp(physical_port)
+
+    try:
+        api = sfp.get_xcvr_api()
+    except NotImplementedError:
+        click.echo("This functionality is currently not implemented for this platform")
+        sys.exit(ERROR_NOT_IMPLEMENTED)
+
+    if mode == 0:
+        click.echo("Running firmware: Non-hitless Reset to Inactive Image")
+    elif mode == 1:
+        click.echo("Running firmware: Hitless Reset to Inactive Image")
+    elif mode == 2:
+        click.echo("Running firmware: Attempt non-hitless Reset to Running Image")
+    elif mode == 3:
+        click.echo("Running firmware: Attempt Hitless Reset to Running Image")
+    else:
+        click.echo("Running firmware: Unknown mode {}".format(mode))
+        sys.exit(EXIT_FAIL)
+
+    try:
+        status = api.cdb_run_firmware(mode)
+    except NotImplementedError:
+        click.echo("This functionality is not applicable for this transceiver")
+        sys.exit(EXIT_FAIL)
+
+    return status
+
+def commit_firmware(port_name):
+    status = 0
+    physical_port = logical_port_to_physical_port_index(port_name)
+    sfp = platform_chassis.get_sfp(physical_port)
+
+    try:
+        api = sfp.get_xcvr_api()
+    except NotImplementedError:
+        click.echo("This functionality is currently not implemented for this platform")
+        sys.exit(ERROR_NOT_IMPLEMENTED)
+
+    try:
+        status = api.cdb_commit_firmware()
+    except NotImplementedError:
+        click.echo("This functionality is not applicable for this transceiver")
+
+    return status
+
+def download_firmware(port_name, filepath):
+    """Download firmware on the transceiver"""
+    try:
+        fd = open(filepath, 'rb')
+        fd.seek(0, 2)
+        file_size = fd.tell()
+        fd.seek(0, 0)
+    except FileNotFoundError:
+        click.echo("Firmware file {} NOT found".format(filepath))
+        sys.exit(EXIT_FAIL)
+
+    physical_port = logical_port_to_physical_port_index(port_name)
+    sfp = platform_chassis.get_sfp(physical_port)
+    try:
+        api = sfp.get_xcvr_api()
+    except NotImplementedError:
+        click.echo("This functionality is NOT applicable to this platform")
+        sys.exit(ERROR_NOT_IMPLEMENTED)
+
+    try:
+        fwinfo = api.get_module_fw_mgmt_feature()
+        if fwinfo['status'] == True:
+            startLPLsize, maxblocksize, lplonly_flag, autopaging_flag, writelength = fwinfo['feature']
+        else:
+            click.echo("Failed to fetch CDB Firmware management features")
+            sys.exit(EXIT_FAIL)
+    except NotImplementedError:
+        click.echo("This functionality is NOT applicable for this transceiver")
+        sys.exit(ERROR_NOT_IMPLEMENTED)
+
+    click.echo('CDB: Starting firmware download')
+    startdata = fd.read(startLPLsize)
+    status = api.cdb_start_firmware_download(startLPLsize, startdata, file_size)
+    if status != 1:
+        click.echo('CDB: Start firmware download failed - status {}'.format(status))
+        sys.exit(EXIT_FAIL)
+
+    # Increase the optoe driver's write max to speed up firmware download
+    sfp.set_optoe_write_max(SMBUS_BLOCK_WRITE_SIZE)
+
+    with click.progressbar(length=file_size, label="Downloading ...") as bar:
+        address = 0
+        BLOCK_SIZE = MAX_LPL_FIRMWARE_BLOCK_SIZE if lplonly_flag else maxblocksize
+        remaining = file_size - startLPLsize
+        while remaining > 0:
+            count = BLOCK_SIZE if remaining >= BLOCK_SIZE else remaining
+            data = fd.read(count)
+            if len(data) != count:
+                click.echo("Firmware file read failed!")
+                sys.exit(EXIT_FAIL)
+
+            if lplonly_flag:
+                status = api.cdb_lpl_block_write(address, data)
+            else:
+                status = api.cdb_epl_block_write(address, data, autopaging_flag, writelength)
+            if (status != 1):
+                click.echo("CDB: firmware download failed! - status {}".format(status))
+                sys.exit(EXIT_FAIL)
+
+            bar.update(count)
+            address += count
+            remaining -= count
+
+    # Restore the optoe driver's write max to '1' (default value)
+    sfp.set_optoe_write_max(1)
+
+    status = api.cdb_firmware_download_complete()
+    click.echo('CDB: firmware download complete')
+    return status
+
+# 'run' subcommand
+@firmware.command()
+@click.argument('port_name', required=True, default=None)
+@click.option('--mode', default="1", type=click.Choice(["0", "1", "2", "3"]), show_default=True,
+                                                         help="0 = Non-hitless Reset to Inactive Image\n \
+                                                               1 = Hitless Reset to Inactive Image (Default)\n \
+                                                               2 = Attempt non-hitless Reset to Running Image\n \
+                                                               3 = Attempt Hitless Reset to Running Image\n")
+def run(port_name, mode):
+    """Run the firmware with default mode=1"""
+
+    if not is_sfp_present(port_name):
+        click.echo("{}: SFP EEPROM not detected\n".format(port_name))
+        sys.exit(EXIT_FAIL)
+
+    status = run_firmware(port_name, int(mode))
+    if status != 1:
+        click.echo('Failed to run firmware in mode={}! CDB status: {}'.format(mode, status))
+        sys.exit(EXIT_FAIL)
+
+    click.echo("Firmware run in mode={} success".format(mode))
+
+# 'commit' subcommand
+@firmware.command()
+@click.argument('port_name', required=True, default=None)
+def commit(port_name):
+    """Commit the running firmware"""
+
+    if not is_sfp_present(port_name):
+        click.echo("{}: SFP EEPROM not detected\n".format(port_name))
+        sys.exit(EXIT_FAIL)
+
+    status = commit_firmware(port_name)
+    if status != 1:
+        click.echo('Failed to commit firmware! CDB status: {}'.format(status))
+        sys.exit(EXIT_FAIL)
+
+    click.echo("Firmware commit successful")
+
+# 'upgrade' subcommand
+@firmware.command()
+@click.argument('port_name', required=True, default=None)
+@click.argument('filepath', required=True, default=None)
+def upgrade(port_name, filepath):
+    """Upgrade firmware on the transceiver"""
+
+    physical_port = logical_port_to_physical_port_index(port_name)
+
+    if not is_sfp_present(port_name):
+        click.echo("{}: SFP EEPROM not detected\n".format(port_name))
+        sys.exit(EXIT_FAIL)
+
+    show_firmware_version(physical_port)
+
+    status = download_firmware(port_name, filepath)
+    if status == 1:
+        click.echo("Firmware download complete success")
+    else:
+        click.echo("Firmware download complete failed! CDB status = {}".format(status))
+        sys.exit(EXIT_FAIL)
+
+    status = run_firmware(port_name, 1)
+    if status != 1:
+        click.echo('Failed to run firmware in mode=1 ! CDB status: {}'.format(status))
+        sys.exit(EXIT_FAIL)
+
+    click.echo("Firmware run in mode 1 successful")
+
+    status = commit_firmware(port_name)
+    if status != 1:
+        click.echo('Failed to commit firmware! CDB status: {}'.format(status))
+        sys.exit(EXIT_FAIL)
+
+    click.echo("Firmware commit successful")
+
+# 'download' subcommand
+@firmware.command()
+@click.argument('port_name', required=True, default=None)
+@click.argument('filepath', required=True, default=None)
+def download(port_name, filepath):
+    """Download firmware on the transceiver"""
+
+    if not is_sfp_present(port_name):
+       click.echo("{}: SFP EEPROM not detected\n".format(port_name))
+       sys.exit(EXIT_FAIL)
+
+    start = time.time()
+    status = download_firmware(port_name, filepath)
+    if status == 1:
+        click.echo("Firmware download complete success")
+    else:
+        click.echo("Firmware download complete failed! status = {}".format(status))
+        sys.exit(EXIT_FAIL)
+    end = time.time()
+    click.echo("Total download Time: {}".format(str(datetime.timedelta(seconds=end-start))))
+
+
+# 'unlock' subcommand
+@firmware.command()
+@click.argument('port_name', required=True, default=None)
+@click.option('--password', type=click.INT, help="Password in integer\n")
+def unlock(port_name, password):
+    """Unlock the firmware download feature via CDB host password"""
+    physical_port = logical_port_to_physical_port_index(port_name)
+    sfp = platform_chassis.get_sfp(physical_port)
+
+    if not is_sfp_present(port_name):
+       click.echo("{}: SFP EEPROM not detected\n".format(port_name))
+       sys.exit(EXIT_FAIL)
+
+    try:
+        api = sfp.get_xcvr_api()
+    except NotImplementedError:
+        click.echo("This functionality is currently not implemented for this platform")
+        sys.exit(ERROR_NOT_IMPLEMENTED)
+
+    if password is None:
+        password = CDB_DEFAULT_HOST_PASSWORD
+    try:
+        status = api.cdb_enter_host_password(int(password))
+    except NotImplementedError:
+        click.echo("This functionality is not applicable for this transceiver")
+        sys.exit(EXIT_FAIL)
+
+    if status == 1:
+        click.echo("CDB: Host password accepted")
+    else:
+        click.echo("CDB: Host password NOT accepted! status = {}".format(status))
 
 # 'version' subcommand
 @cli.command()