This is version 2 of the RGBtoHDMI CDTV solution.
Improvements over version one are:
- Full sized HDMI port
- DB9 mouse and joystick ports
- JP15 toggle switch
This is an RGBtoHDMI solution is based on the original work by hoglet67 and IanSB:
hoglet67: https://github.com/hoglet67/RGBtoHDMI
IanSB: https://github.com/IanSB/RGBtoHDMI
The solution is based on the RGBtoHDMI CPLD based hardware design by LinuxJedi:
https://github.com/LinuxJedi/AmigaRGBtoHDMI
Special mention to c0pperdragon for the original RGBtoHDMI board solution for the Amiga:
https://github.com/c0pperdragon/Amiga-Digital-Video
The design files are available for KiCAD v6.
This is the Xilinx XC9572XL QFP 44-pin package version.
This is the main RGBtoHDMI board, with daughter board, and face plate:
Note: Due to limitations of the 3D rendering in KiCAD, some of the colours and components are not accurate.
This is the Denise adapter that is required to connect to the main board. It provides the digital RGB video and JP15 signals to the main board.
RGBtoHDMI CDTV v2 - Denise Breakout
This is the mouse and joystick adapter required to connect to the DB9 ports on the main board:
RGBtoHDMI CDTV v2 - Mouse and Joystick Adapter
The adapter uses a 18-pin (1mm pitch) FFC flex cable. A 60cm long flex cable is ideally required. However, if only 30cm long flex cables are available then an FFC extender board can be used to join two of them together:
Please see the wiki for further details: