Replies: 17 comments 8 replies
-
|
Do you have the correct energy sensors for Daily Production? You need sensors for your Battery, Solar, Grid and load. If your Inverter integration does not provide these you can create your own sensor using the HA helpers. |
Beta Was this translation helpful? Give feedback.
-
|
create your own ??? how to do it Thank you |
Beta Was this translation helpful? Give feedback.
-
|
Have a look here |
Beta Was this translation helpful? Give feedback.
-
|
Thank you very much for the advice, I have already tried this process and it worked the only thing is that if I set it to the day of production, it can't wind me every day it keeps charging me the next day and not just the current day |
Beta Was this translation helpful? Give feedback.
-
|
day 1 10Kwh day 2 10Kwh shows the sum I would like Kwh from 0 every day |
Beta Was this translation helpful? Give feedback.
-
|
When you create your utility meter make sure that the reset cycle is set to daily
|
Beta Was this translation helpful? Give feedback.
-
|
@LubkoFV Instead of utility_meter have a look at https://github.com/zeronounours/HA-custom-component-energy-meter this expands upon the utility meter, but allows you to call a sensor you've defined for the cost/compensation of the power (import or export) and then have it create a sensor that tracks the cost/compensation. Setup multiple meters with daily / weekly / monthly / yearly as the cycle and you end up with sensors showing the daily / weekly / monthly / yearly of electricity kWh consumed from the grid and its cost, and also the same but for what you exported kWh to the grid and how much you got paid. |
Beta Was this translation helpful? Give feedback.
-
|
and if I may ask, would it be possible to add the Growatt giant model |
Beta Was this translation helpful? Give feedback.
-
|
Yes can you share a link to the image of the inverter (png) |
Beta Was this translation helpful? Give feedback.
-
|
good day Thank you very much, you are amazing, you helped me a lot if there was a picture of the Inventor Growatt spf 5000es, that would be great but now you are great for me, thank you very much Thank you |
Beta Was this translation helpful? Give feedback.
-
|
thank you very much, you're great |
Beta Was this translation helpful? Give feedback.
-
|
otherwise your app is great and I'm a big fan of you and I'm looking forward to more news |
Beta Was this translation helpful? Give feedback.
-
|
I am currently looking at Charge battery automation |
Beta Was this translation helpful? Give feedback.
-
|
Hello good day
I can't assemble
I don't know where to write the sensors
otherwise thank you very much
I'm weak at it
…--
Luboš Lorinc
***@***.***
www.luboslorinc.cz
mob: 604 103 942
---------- Původní e-mail ----------
Od: Roving Ronin ***@***.***>
Komu: slipx06/sunsynk-power-flow-card ***@***.***
github.com>
Kopie: LubkoFV ***@***.***>, Mention ***@***.***>
Datum: 26. 2. 2024 4:41:27
Předmět: Re: [slipx06/sunsynk-power-flow-card] Growatt SPF ikona days of
production (Discussion #254)
"
@LubkoFV(https://github.com/LubkoFV) Instead of utility_meter have a look at
https://github.com/zeronounours/HA-custom-component-energy-meter
(https://github.com/zeronounours/HA-custom-component-energy-meter) this
expands upon the utility meter, but allows you to call a sensor you've
defined for the cost/compensation of the power (import or export) and then
have it create a sensor that tracks the cost/compensation. Setup multiple
meters with daily / weekly / monthly / yearly as the cycle and you end up
with sensors showing the daily / weekly / monthly / yearly of electricity
kWh consumed from the grid and its cost, and also the same but for what you
exported kWh to the grid and how much you got paid.
—
Reply to this email directly, view it on GitHub
(#254 (reply in thread))
, or unsubscribe
(https://github.com/notifications/unsubscribe-auth/A56RM2GB4HHILYVIEYQ4AWTYVP76FAVCNFSM6AAAAABDNCR7ZKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DKOBXGMZTM)
.
You are receiving this because you were mentioned. Message ID: <slipx06/
***@***.***>
"
|
Beta Was this translation helpful? Give feedback.
-
|
@LubkoFV sorry 'assemble' ? Energy Meter is added to you HA instance, using HACS. Just search for it in the 'Integrations' section, click on it to open it and then finally click on the 'Download' button at the bottom right of screen to install. How are you charged for your electricity in your country? If you only pay a flat $ per kWh imported, and a flat amount you receive for each kWh exported to the grid then have a look at: This creates the energy meters to track the daily / weekly / monthly / yearly kWh exported (and auto creates another sensor for each using the Electricity - Price and Electricity - FIT (feed in tariff...i.e. what you get paid to export) that tracks the $ for each time period. If you have something more complex, this is my own homes costs where I pay per kWh depending upon that tariff period of the day it was used (peak / shoulder / off peak), so this adds the energy meters, but apart from each day / week / month / year it also creates addition ones within each of those days -->years for each of the tariff periods (i.e. there's a day-peak / day-shoulder / day-offpeak). So whilst I can see how much I used / paid in each of those periods it then uses 'HA Groups' to sum up those periods within a day and the group then gives me the total kWh / Cost $ per day/week/month/year. As there's now time periods, it also means HA needs to keep checking the time and have an automation that checks the time and then updates the SELECTOR in HA to update what is the current billing period tariff to be counting toward (i.e. peak / shoulder / off peak). Given the data from Huawei inverters is polled every 30 seconds, the automation is then configured to update the selector at 30 seconds after the tariff plans change with the energy retailer (i.e. 7pm change...so it updates at 7:00:30 pm) |
Beta Was this translation helpful? Give feedback.
-
|
I'm so sorry
I'm not very good at it
I'm new to it
I did some tracking, but I'm not very good at it
I would like more statistics and automation for pylontech batteries, but it's very slow and slow


Thank you very much for your help, you are amazing and I thank you very much
I learn it myself from the video or through google or from you
and for that I thank you many times
and thanks for any help

www.luboslorinc.cz
Contact 604103942
… 26. 2. 2024 v 11:44, Roving Ronin ***@***.***>:
@LubkoFV <https://github.com/LubkoFV> sorry 'assemble' ? Energy Meter is added to you HA instance, using HACS. Just search for it in the 'Integrations' section, click on it to open it and then finally click on the 'Download' button at the bottom right of screen to install.
How are you charged for your electricity in your country? If you only pay a flat $ per kWh imported, and a flat amount you receive for each kWh exported to the grid then have a look at:
https://github.com/Roving-Ronin/sunsynk-power-flow-card/blob/master/docs/examples/huawei_packages/huawei_solar_electricity_costs_AU_Red_Energy_TOU.yaml
This creates the energy meters to track the daily / weekly / monthly / yearly kWh exported (and auto creates another sensor for each using the Electricity - Price and Electricity - FIT (feed in tariff...i.e. what you get paid to export) that tracks the $ for each time period.
If you have something more complex, this is my own homes costs where I pay per kWh depending upon that tariff period of the day it was used (peak / shoulder / off peak), so this adds the energy meters, but apart from each day / week / month / year it also creates addition ones within each of those days -->years for each of the tariff periods (i.e. there's a day-peak / day-shoulder / day-offpeak). So whilst I can see how much I used / paid in each of those periods it then uses 'HA Groups' to sum up those periods within a day and the group then gives me the total kWh / Cost $ per day/week/month/year.
As there's now time periods, it also means HA needs to keep checking the time and have an automation that checks the time and then updates the SELECTOR in HA to update what is the current billing period tariff to be counting toward (i.e. peak / shoulder / off peak). Given the data from Huawei inverters is polled every 30 seconds, the automation is then configured to update the selector at 30 seconds after the tariff plans change with the energy retailer (i.e. 7pm change...so it updates at 7:00:30 pm)
https://github.com/Roving-Ronin/sunsynk-power-flow-card/blob/master/docs/examples/huawei_packages/huawei_solar_electricity_costs_AU_Red_Energy_TOU.yaml
—
Reply to this email directly, view it on GitHub <#254 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A56RM2G3TB5QENYKMGRMNRDYVRRPJAVCNFSM6AAAAABDNCR7ZKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DKOJQHAZTO>.
You are receiving this because you were mentioned.
|
Beta Was this translation helpful? Give feedback.
-
|
@LubkoFV I have found a few bugs and an error, and also tried to simplify the tasks to setup the card with Huawei. I have submitted a PULL request to update the updated files into Sunsynk Documentation this will appear at: https://slipx06.github.io/sunsynk-power-flow-card/examples/huawei.html When you see a table (its rough, I am trying to work out writing in ReST), that is the updated version, please read and re-download the updated configuration and yaml files again, delete the ones you have and reload with the new ones. |
Beta Was this translation helpful? Give feedback.
-
|
good day
could I ask for a graphic for the Growatt spf 5000 jpg
as an inventor
Thank you

www.luboslorinc.cz
Contact 604103942
… 27. 2. 2024 v 13:14, Roving Ronin ***@***.***>:
@LubkoFV <https://github.com/LubkoFV> I have found a few bugs and an error, and also tried to simplify the tasks to setup the card with Huawei. I have submitted a PULL request to update the updated files into Sunsynk Documentation this will appear at:
https://slipx06.github.io/sunsynk-power-flow-card/examples/huawei.html
When you see a table (its rough, I am trying to work out writing in ReST), that is the updated version, please read and re-download the updated configuration and yaml files again, delete the ones you have and reload with the new ones.
|
Beta Was this translation helpful? Give feedback.
-
|

good day
I couldn't find the picture
Thank you

www.luboslorinc.cz
Contact 604103942
… 29. 2. 2024 v 18:46, slipx06 ***@***.***>:
@LubkoFV <https://github.com/LubkoFV> added to 4.17.0 <https://github.com/slipx06/sunsynk-power-flow-card/releases/tag/v4.17.0>
—
Reply to this email directly, view it on GitHub <#254 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A56RM2GTIK45HOY2FHFFCB3YV5URDAVCNFSM6AAAAABDNCR7ZKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DMMZUGEYTG>.
You are receiving this because you were mentioned.
|
Beta Was this translation helpful? Give feedback.
-
|
|
Beta Was this translation helpful? Give feedback.
-
|
good day
I understand how it's set up, but there's an error somewhere, so I don't want to display growatt
but it works fine on the app on my mobile
so I'll think about where I'm going wrong
Thank you
na PC

na mobilu


www.luboslorinc.cz
Contact 604103942
… 29. 2. 2024 v 21:46, slipx06 ***@***.***>:
image.png (view on web) <https://github.com/slipx06/sunsynk-power-flow-card/assets/7227275/ef183de1-d3cc-48f8-9f5d-c7fa7428c31e>
—
Reply to this email directly, view it on GitHub <#254 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A56RM2CIJMKRUEJTNGGOQ2DYV6JS3AVCNFSM6AAAAABDNCR7ZKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DMMZVGU4TM>.
You are receiving this because you were mentioned.
|
Beta Was this translation helpful? Give feedback.
-
|
good day
everything is ok now, it works for me with growatem
Thank you very much
Thank you

www.luboslorinc.cz
Contact 604103942
… 29. 2. 2024 v 21:46, slipx06 ***@***.***>:
image.png (view on web) <https://github.com/slipx06/sunsynk-power-flow-card/assets/7227275/ef183de1-d3cc-48f8-9f5d-c7fa7428c31e>
—
Reply to this email directly, view it on GitHub <#254 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A56RM2CIJMKRUEJTNGGOQ2DYV6JS3AVCNFSM6AAAAABDNCR7ZKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DMMZVGU4TM>.
You are receiving this because you were mentioned.
|
Beta Was this translation helpful? Give feedback.
-
|
good day
it would not be possible to render graphics from two independent
inventories, I have two inventories in one phase
so that every inventor has inputs, outputs and sums, shouldn't it be
granted??
I just have 2X inventor PV, grid, Load is always special
at the end it is cleaned so that it can be seen how everyone is driving,
what load and vikon
2x inventor in one phase
Thank you
for info
they have already perfected it
it would be more
…--
Luboš Lorinc
***@***.***
www.luboslorinc.cz
mob: 604 103 942
---------- Původní e-mail ----------
Od: slipx06 ***@***.***>
Komu: slipx06/sunsynk-power-flow-card ***@***.***
github.com>
Kopie: LubkoFV ***@***.***>, Mention ***@***.***>
Datum: 29. 2. 2024 21:46:41
Předmět: Re: [slipx06/sunsynk-power-flow-card] Growatt SPF ikona days of
production (Discussion #254)
"
image.png (view on web)
(https://github.com/slipx06/sunsynk-power-flow-card/assets/7227275/ef183de1-d3cc-48f8-9f5d-c7fa7428c31e)
—
Reply to this email directly, view it on GitHub
(#254 (reply in thread))
, or unsubscribe
(https://github.com/notifications/unsubscribe-auth/A56RM2CIJMKRUEJTNGGOQ2DYV6JS3AVCNFSM6AAAAABDNCR7ZKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4DMMZVGU4TM)
.
You are receiving this because you were mentioned. Message ID: <slipx06/
***@***.***>
"
|
Beta Was this translation helpful? Give feedback.
-
|
good morning, if I offended you in any way, I'm very sorry, I'm sorry, have a nice dayLubkoPHOTOmobil:60410394229. 2. 2024 v 21:46, slipx06 ***@***.***>:
image.png (view on web)
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
good day
please add Growatt SPF icon
and my daily production is not working
otherwise top application
Thank you very much
detail:
type: custom:sunsynk-power-flow-card
cardstyle: compact
panel_mode: false
show_solar: true
battery:
energy: 24000
shutdown_soc: 100
show_daily: true
max_power: 1500
auto_scale: true
invert_power: false
show_absolute: false
hide_soc: true
show_remaining_energy: false
solar:
show_daily: true
mppts: 2
max_power: 2000
auto_scale: true
dynamic_colour: false
display_mode: 3
load:
show_daily: true
model: Growatt
max_power: 1500
auto_scale: true
dynamic_colour: true
dynamic_icon: true
show_aux: false
invert_aux: false
additional_loads: 2
load1_icon: mdi:bathtub
load1_name: TUV
essential_name: tuv setap
load2_icon: mdi:pool
load2_name: Bazen
grid:
show_daily_buy: true
show_daily_sell: false
show_nonessential: true
max_power: 1500
auto_scale: true
no_grid_colour:
- 0
- 138
- 135
invert_grid: true
colour:
- 206
- 255
- 31
entities:
inverter_voltage_154: sensor.growatt_spf_x_2_inverter_1_pv_voltage_1
inverter_power_175: sensor.growatt_spf_x_2_load_power
day_battery_charge_70: sensor.growatt_spf_x_2_battery_energy_in
day_battery_discharge_71: sensor.growatt_spf_x_2_battery_energy_out
battery_voltage_183: sensor.growatt_spf_x_2_inverter_1_battery_voltage
battery_soc_184: sensor.growatt_spf_x_2_battery_state_of_charge
battery_power_190: sensor.growatt_spf_x_2_battery_power
battery_current_191: sensor.batteri_soucet_curent
grid_power_169: '0'
day_grid_import_76: sensor.growatt_spf_x_2_grid_energy_in
grid_ct_power_172: sensor.growatt_spf_x_2_grid_power
day_load_energy_84: sensor.growatt_spf_x_2_load_energy
nonessential_power: none
day_pv_energy_108: sensor.oo
pv1_power_186: sensor.growatt_spf_x_2_inverter_2_pv_power
pv2_power_187: sensor.growatt_spf_x_2_inverter_1_pv_power
pv1_voltage_109: sensor.growatt_spf_x_2_inverter_2_pv_voltage_1
pv1_current_110: sensor.growatt_spf_x_2_inverter_2_pv_current_1
pv2_voltage_111: sensor.growatt_spf_x_2_inverter_1_pv_voltage_1
pv2_current_112: sensor.growatt_spf_x_2_inverter_1_pv_current_1
essential_load1: sensor.tuv_drazice_current_power
day_grid_export_77: sensor.growatt_spf_x_2_grid_energy_out
battery_rated_capacity: sensor.growatt_spf_x_2_battery_state_of_charge
battery_current_direction: sensor.growatt_spf_x_2_inverter_1_battery_current
essential_load2: sensor.filtrace_bazen_current_power
inverter_current_164: sensor.pv_curent_1_2
total_pv_generation: sensor.growatt_spf_x_2_pv_energy
inverter:
autarky: power
model: ''
modern: true
colour:
- 255
- 255
- 255
auto_scale: true
three_phase: false
show_battery: true
show_grid: true
large_font: true
decimal_places: 2
Beta Was this translation helpful? Give feedback.
All reactions