Lenovo V330-15IKB Hackintosh Notes
These are my notes installing MacOS 13 Ventura on this laptop using OpenCore 1.0.0 (latest version as of writing).
| PART | MODEL | NOTES |
|---|---|---|
| CPU | Intel i7-8550U | Supported up to current |
| IGPU | Intel UHD Graphics 620 | Supported up to current |
| DGPU | AMD Radeon 530 | Supported up to 12.6.x, you can disable it in BIOS if you want. |
| RAM | 8GB | |
| STORAGE | 1TB 7200RPM HDD | |
| WIFI CARD | Intel Corporation Dual Band Wireless-AC 3165 | |
| NETWORK CONTROLLER | Realtek Semiconductor Co., Ltd. RTL8111 | |
| TOUCHPAD | Synaptics I2C | |
| KEYBOARD | PS/2 | |
| AUDIO | CX29751 | Layout ID: 3 |
| KEXT | NOTES |
|---|---|
| Lilu | Required |
| VirtualSMC | Required |
| WhateverGreen | Required |
| AppleALC | |
| RealtekRTL8111 | |
| BlueToolFixup | DO NOT USE ON BIG SUR AND BELOW!!! |
| AirportITLWM | Grab the corresponding kext for the corresponding MacOS version you want to install. I used Ventura. |
| VoodooPS2 | For the keyboard to work |
| ECEnabler | |
| BrightnessKeys |
Note: All of these were compiled using SSDTTime.
| SSDT | Notes |
|---|---|
| SSDT-PLUG | |
| SSDT-EC/USBX | |
| SSDT-PNLF | |
| SSDT-XOSI/SSDT-GPI0 | |
| SSDT-USBX |
- Touchpad not working (I’m not going to bother. I tried to fix it using VoodooI2C and VoodooRMI but it just stops working after a while.)
- Sleep (I just disabled it, I don’t need sleep)