Bornhack Badge 2019

About the hardware

Like the previous two years this years badge is again using the SiLabs Happy Gecko microcontroller. This year it's sporting a 240x240 pixel screen with 6x6x6-bit colour resolution, a MicroSD card reader and some basic IR communication.

We have separated the hardware design files from the code and put them in the hardware branch for you to have a look at and build on.

You can download the microcontroller reference manual and datasheet directly from SiliconLabs.

About the code

This repo is meant as a starting point for developing your own code for the Bornhack 2019 badge. Like the previous years we're using the geckonator library, but this year everything is split out into separate source files. Every file ending in .c will automatically be included in the build.

This way it should be easy to add your own code in a separate file and add it to the main menu in main.c. Have a look at buttontest.c, showbmp.c or dumpir.c for examples.

For reading the partition table and FAT filesystem on an SD-card we're using the FatFs library.

Hack your own badge

1. Install dependencies

Archlinux

pacman -S arm-none-eabi-gcc arm-none-eabi-newlib make

Debian/Ubuntu

apt-get install gcc-arm-none-eabi libnewlib-arm-none-eabi make

Fedora

dnf install arm-none-eabi-gcc arm-none-eabi-newlib make

NixOS/Nix

nix-shell

OSX

Download an arm-none-eabi toolchain from ARM here. Unpack the tarball and update your PATH variable to point to the unpacked bin directory.

Windows

Option 1

Download the apropriate installer from ARM here. Install it and update your path. You'll also need GNU Make installed. A pre-built version can be downloaded here.

Option 2

Use Windows Subsystem for Linux with Ubuntu 16.04 Xenial or newer and proceed as on Ubuntu above.

2. Get the source code

If you already have git installed

git clone https://github.com/bornhack/badge2019.git
cd badge2019
git submodule init
git submodule update

Otherwise you can download a tarball or zip file from https://github.com/bornhack/badge2019

3. Build the code

Simply type make in the downloaded directory. This should produce a file called code.bin in the out directory.

4. Update your badge

1. Connect a USB cable to the board and your computer.
2. Press the BOOT button on the badge.
3. Copy out/code.bin to the GECKOBOOT USB stick that appeared on your computer.
4. Eject (or unmount) the USB stick, and watch your code run.

Alternatively if you have dfu-utils installed step 3 and 4 can be replaced by typing make dfu in the source repository.