Develop into 2.0.7 (#40)
* - Created different versions for 8048S070C
- Updated documentation
* Touch not swapped on x
* Added ESP32_2432S022C
* Added images for esp32-2432S022
* Added PCLK_HZ
* Updated MD
* ST7789 new variables
* Typo ST7789_SPI_CONFIG_TRANS_QUEUE_DEPTH
* Variables GC9A01
* ILI9341 variables
* ST7262 Variables
* DTOUCH_SWAP_X and Y for 8048S070
* ST7701 variables
* ST7701 Added vendor config
* ST7701_LINE_CONFIG
* Removed not required line
* ST7796 Variables
* SPI_DMA_CHANNEL
* CST816S variables
* Typos
* GT911 Variables
* XPT2046 variables
* Typo line config spi3 wire
* Typos
* Space is required for 2432S028Rv2
* Quote defines
* LCD_USES and TOUCH _USES to HAS
* BOARD_HAS
* Remove BUTTON_BOOT=0
* Typos
* TOUCH_CST816S_I2C
* Added interface type to LCD/TOUCH
* Updated 2432S022C
* Corrected ST7789_IO_I80_CONFIG_LCD_PARAM_BITS
* Added 2432S022N
* Decreased the PCLK from 16M to 12M
* Added 8048S070R
* Updated MD
* Missing defines
* Added IPS Setting
* Added missing '
* IPS
* RGB
* Renamed schematic board
* Made 8038S070 v13 board default, removed old one
* - Fixed typo in i2c command length
- Added swap_xy for touch
* Removed youch config flags: Not supported
* Touch esp32-7048S070C
* Touch for esp32-4848S040C
* Fixed touch esp32-2432S24C
* touch esp32-2432S32C
* checked touch esp32-3248S035
* Set int for gt911
* fixed esp32-8048S043
* Updated back porch for 5"
* Updated porch in 5"
* no touch Swap for esp32-4848S040
* touch on esp32-4848S040
* Removed boards
* Remove v13 boards
* 1a->1A
* Added new clone board esp32-2432S028Rv3
* Data bits are upper D8-D15
* SRAM_TRANS_ALIGN changed from 16 -> 4
* Only upper data d8-D15
* Updated RST and INT of esp32-2432S022C
* 16Mhz 2432S022
* Reverted clock freq
* esp32-8048S050N R anf B were swapped
* Added settings for LVGL buffer size and MALLOC settings
* Set PCLK for ST7272 to 8M
Fixed touch swap on esp32-8048S070
* Updated touch orientation esp32-4848S040
* max size for esp32-2432S022
* Added spi_bus_config_t flags, intr flags and max_size
* Corrected swap R<->B for esp32-8048S050C/R
* Updated for esp32-2432S022
* Reduced PCLK that prevented esp2432S022 from working!
* BCKL to GPIO_BCKL
* Fixed markdown table layout
* Updated MD
* test
* test layout
* md test
* removed styles
* esp32c3 enable usb logging on boot
* Merge README.md
* Updated LCD_ST7789_I80
* Updated with Sunton settings for esp32-8048S050
* Removed Pullups for I2C. Some renaming.
* Set SPI_BUS_MAX_TRANSFER_SZ to LVGL_BUFFER_PIXELS * lv_color_t
