Skip to content

Commit

Permalink
2.0.5 Develop to Main (#36)
Browse files Browse the repository at this point in the history 
* - Created different versions for 8048S070C
- Updated documentation

* Touch not swapped on x

* Added ESP32_2432S022C

* Added images for esp32-2432S022

* Added PCLK_HZ

* Updated MD

* ST7789 new variables

* Typo ST7789_SPI_CONFIG_TRANS_QUEUE_DEPTH

* Variables GC9A01

* ILI9341 variables

* ST7262 Variables

* DTOUCH_SWAP_X and Y for 8048S070

* ST7701 variables

* ST7701 Added vendor config

* ST7701_LINE_CONFIG

* Removed not required line

* ST7796 Variables

* SPI_DMA_CHANNEL

* CST816S variables

* Typos

* GT911 Variables

* XPT2046 variables

* Typo line config spi3 wire

* Typos

* Space is required for 2432S028Rv2

* Quote defines

* LCD_USES and TOUCH _USES to HAS

* BOARD_HAS

* Remove BUTTON_BOOT=0

* Typos

* TOUCH_CST816S_I2C

* Added interface type to LCD/TOUCH

* Updated 2432S022C

* Corrected ST7789_IO_I80_CONFIG_LCD_PARAM_BITS

* Added 2432S022N

* Decreased the PCLK from 16M to 12M

* Added 8048S070R

* Updated MD

* Missing defines

* Added IPS Setting

* Added missing '

* IPS

* RGB

* Renamed schematic board

* Made 8038S070 v13 board default, removed old one

* - Fixed typo in i2c command length
- Added swap_xy for touch

* Removed youch config flags: Not supported

* Touch esp32-7048S070C

* Touch for esp32-4848S040C

* Fixed touch esp32-2432S24C

* touch esp32-2432S32C

* checked touch esp32-3248S035

* Set int for gt911

* fixed esp32-8048S043

* Updated back porch for 5"

* Updated porch in 5"

* no touch Swap for esp32-4848S040

* touch on esp32-4848S040

* Removed boards

* Remove v13 boards

* 1a->1A

* Added new clone board esp32-2432S028Rv3

* Data bits are upper D8-D15

* SRAM_TRANS_ALIGN changed from 16 -> 4

* Only upper data d8-D15

* Updated RST and INT of esp32-2432S022C

* 16Mhz 2432S022

* Reverted clock freq

* esp32-8048S050N R anf B were swapped

* Added settings for LVGL buffer size and MALLOC settings

* Set PCLK for ST7272 to 8M
Fixed touch swap on esp32-8048S070

* Updated touch orientation esp32-4848S040

* max size for esp32-2432S022

* Added spi_bus_config_t flags, intr flags and max_size

* Corrected swap R<->B for esp32-8048S050C/R

* Updated for esp32-2432S022
  • Loading branch information
@rzeldent
rzeldent authored Feb 9, 2024
1 parent b66bca7 commit 4aa429f
Show file tree
Hide file tree
Showing 32 changed files with 337 additions and 117 deletions.
63 changes: 32 additions & 31 deletions README.md
View file

Large diffs are not rendered by default.

5 changes: 5 additions & 0 deletions esp32-1732S019C.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -14,6 +14,8 @@
"'-D ARDUINO_EVENT_RUNNING_CORE=1'",
"'-D ARDUINO_USB_CDC_ON_BOOT=0'",
"'-D ESP32_1732S019C'",
"'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT)'",
"'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'",
"'-D LCD_WIDTH=170'",
"'-D LCD_HEIGHT=320'",
"'-D BCKL=14'",
Expand All @@ -26,6 +28,9 @@
"'-D ST7789_SPI_BUS_SCLK_IO_NUM=12'",
"'-D ST7789_SPI_BUS_QUADWP_IO_NUM=GPIO_NUM_NC'",
"'-D ST7789_SPI_BUS_QUADHD_IO_NUM=GPIO_NUM_NC'",
"'-D ST7789_SPI_BUS_MAX_TRANSFER_SZ=0'",
"'-D ST7789_SPI_BUS_FLAGS=0'",
"'-D ST7789_SPI_BUS_INTR_FLAGS=0'",
"'-D ST7789_SPI_CONFIG_CS_GPIO_NUM=10'",
"'-D ST7789_SPI_CONFIG_DC_GPIO_NUM=11'",
"'-D ST7789_SPI_CONFIG_SPI_MODE=SPI_MODE3'",
Expand Down
5 changes: 5 additions & 0 deletions esp32-1732S019N.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -16,6 +16,8 @@
"'-D ESP32_1732S019N'",
"'-D LCD_WIDTH=170'",
"'-D LCD_HEIGHT=320'",
"'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT)'",
"'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'",
"'-D BCKL=14'",
"'-D LCD_IPS'",
"'-D LCD_ST7789_SPI'",
Expand All @@ -26,6 +28,9 @@
"'-D ST7789_SPI_BUS_SCLK_IO_NUM=12'",
"'-D ST7789_SPI_BUS_QUADWP_IO_NUM=GPIO_NUM_NC'",
"'-D ST7789_SPI_BUS_QUADHD_IO_NUM=GPIO_NUM_NC'",
"'-D ST7789_SPI_BUS_MAX_TRANSFER_SZ=0'",
"'-D ST7789_SPI_BUS_FLAGS=0'",
"'-D ST7789_SPI_BUS_INTR_FLAGS=0'",
"'-D ST7789_SPI_CONFIG_CS_GPIO_NUM=10'",
"'-D ST7789_SPI_CONFIG_DC_GPIO_NUM=11'",
"'-D ST7789_SPI_CONFIG_SPI_MODE=SPI_MODE3'",
Expand Down
5 changes: 5 additions & 0 deletions esp32-2424S012C.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -12,6 +12,8 @@
"'-D ESP32_2424S012C'",
"'-D LCD_WIDTH=240'",
"'-D LCD_HEIGHT=240'",
"'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'",
"'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
"'-D BCKL=3'",
"'-D LCD_GC9A01_SPI'",
"'-D GC9A01_SPI_HOST=SPI2_HOST'",
Expand All @@ -21,6 +23,9 @@
"'-D GC9A01_SPI_BUS_SCLK_IO_NUM=6'",
"'-D GC9A01_SPI_BUS_QUADWP_IO_NUM=GPIO_NUM_NC'",
"'-D GC9A01_SPI_BUS_QUADHD_IO_NUM=GPIO_NUM_NC'",
"'-D GC9A01_SPI_BUS_MAX_TRANSFER_SZ=0'",
"'-D GC9A01_SPI_BUS_FLAGS=0'",
"'-D GC9A01_SPI_BUS_INTR_FLAGS=0'",
"'-D GC9A01_SPI_CONFIG_CS_GPIO_NUM=10'",
"'-D GC9A01_SPI_CONFIG_DC_GPIO_NUM=2'",
"'-D GC9A01_SPI_CONFIG_SPI_MODE=SPI_MODE0'",
Expand Down
5 changes: 5 additions & 0 deletions esp32-2424S012N.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -12,6 +12,8 @@
"'-D ESP32_2424S012N'",
"'-D LCD_WIDTH=240'",
"'-D LCD_HEIGHT=240'",
"'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'",
"'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
"'-D BCKL=3'",
"'-D LCD_GC9A01_SPI'",
"'-D GC9A01_SPI_HOST=SPI2_HOST'",
Expand All @@ -21,6 +23,9 @@
"'-D GC9A01_SPI_BUS_SCLK_IO_NUM=6'",
"'-D GC9A01_SPI_BUS_QUADWP_IO_NUM=GPIO_NUM_NC'",
"'-D GC9A01_SPI_BUS_QUADHD_IO_NUM=GPIO_NUM_NC'",
"'-D GC9A01_SPI_BUS_MAX_TRANSFER_SZ=0'",
"'-D GC9A01_SPI_BUS_FLAGS=0'",
"'-D GC9A01_SPI_BUS_INTR_FLAGS=0'",
"'-D GC9A01_SPI_CONFIG_CS_GPIO_NUM=10'",
"'-D GC9A01_SPI_CONFIG_DC_GPIO_NUM=2'",
"'-D GC9A01_SPI_CONFIG_SPI_MODE=SPI_MODE0'",
Expand Down
28 changes: 15 additions & 13 deletions esp32-2432S022C.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -9,23 +9,25 @@
"'-D ESP32_2432S022C'",
"'-D LCD_WIDTH=240'",
"'-D LCD_HEIGHT=320'",
"'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/8)'",
"'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
"'-D BCKL=0'",
"'-D LCD_ST7789_I80'",
"'-D ST7789_I80_BUS_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
"'-D ST7789_I80_BUS_CONFIG_DC=16'",
"'-D ST7789_I80_BUS_CONFIG_WR=4'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D0=15'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D1=13'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D2=12'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D3=14'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D4=27'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D5=25'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D6=33'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D7=32'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D8=15'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D9=13'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D10=12'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D11=14'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D12=27'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D13=25'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D14=33'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D15=32'",
"'-D ST7789_I80_BUS_CONFIG_BUS_WIDTH=8'",
"'-D ST7789_I80_BUS_CONFIG_MAX_TRANSFER_BYTES=(LCD_WIDTH*32*sizeof(uint16_t))'",
"'-D ST7789_I80_BUS_CONFIG_MAX_TRANSFER_BYTES=(LVGL_BUFFER_PIXELS * sizeof(lv_color_t))'",
"'-D ST7789_I80_BUS_CONFIG_PSRAM_TRANS_ALIGN=64'",
"'-D ST7789_I80_BUS_CONFIG_SRAM_TRANS_ALIGN=16'",
"'-D ST7789_I80_BUS_CONFIG_SRAM_TRANS_ALIGN=4'",
"'-D ST7789_IO_I80_CONFIG_CS_GPIO_NUM=17'",
"'-D ST7789_IO_I80_CONFIG_PCLK_HZ=24000000'",
"'-D ST7789_IO_I80_CONFIG_TRANS_QUEUE_DEPTH=10'",
Expand All @@ -45,7 +47,7 @@
"'-D ST7789_DEV_CONFIG_BITS_PER_PIXEL=16'",
"'-D ST7789_DEV_CONFIG_FLAGS_RESET_ACTIVE_HIGH=false'",
"'-D ST7789_DEV_CONFIG_VENDOR_CONFIG=NULL'",
"'-D ST7789_RD=2'",
"'-D ST7789_RD_GPIO=2'",
"'-D LCD_SWAP_XY=false'",
"'-D LCD_MIRROR_X=false'",
"'-D LCD_MIRROR_Y=false'",
Expand All @@ -67,8 +69,8 @@
"'-D CST816S_IO_I2C_CONFIG_FLAGS_DISABLE_CONTROL_PHASE=true'",
"'-D CST816S_TOUCH_CONFIG_X_MAX=LCD_WIDTH'",
"'-D CST816S_TOUCH_CONFIG_Y_MAX=LCD_HEIGHT'",
"'-D CST816S_TOUCH_CONFIG_RST_GPIO_NUM=1'",
"'-D CST816S_TOUCH_CONFIG_INT_GPIO_NUM=0'",
"'-D CST816S_TOUCH_CONFIG_RST_GPIO_NUM=GPIO_NUM_NC'",
"'-D CST816S_TOUCH_CONFIG_INT_GPIO_NUM=GPIO_NUM_NC'",
"'-D CST816S_TOUCH_CONFIG_LEVELS_RESET=0'",
"'-D CST816S_TOUCH_CONFIG_LEVELS_INTERRUPT=0'",
"'-D TOUCH_SWAP_XY=false'",
Expand Down
24 changes: 13 additions & 11 deletions esp32-2432S022N.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -9,23 +9,25 @@
"'-D ESP32_2432S022N'",
"'-D LCD_WIDTH=240'",
"'-D LCD_HEIGHT=320'",
"'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/8)'",
"'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
"'-D BCKL=0'",
"'-D LCD_ST7789_I80'",
"'-D ST7789_I80_BUS_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
"'-D ST7789_I80_BUS_CONFIG_DC=16'",
"'-D ST7789_I80_BUS_CONFIG_WR=4'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D0=15'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D1=13'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D2=12'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D3=14'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D4=27'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D5=25'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D6=33'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D7=32'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D8=15'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D9=13'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D10=12'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D11=14'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D12=27'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D13=25'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D14=33'",
"'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D15=32'",
"'-D ST7789_I80_BUS_CONFIG_BUS_WIDTH=8'",
"'-D ST7789_I80_BUS_CONFIG_MAX_TRANSFER_BYTES=(LCD_WIDTH*32*sizeof(uint16_t))'",
"'-D ST7789_I80_BUS_CONFIG_MAX_TRANSFER_BYTES=(LVGL_BUFFER_PIXELS * sizeof(lv_color_t))'",
"'-D ST7789_I80_BUS_CONFIG_PSRAM_TRANS_ALIGN=64'",
"'-D ST7789_I80_BUS_CONFIG_SRAM_TRANS_ALIGN=16'",
"'-D ST7789_I80_BUS_CONFIG_SRAM_TRANS_ALIGN=4'",
"'-D ST7789_IO_I80_CONFIG_CS_GPIO_NUM=17'",
"'-D ST7789_IO_I80_CONFIG_PCLK_HZ=24000000'",
"'-D ST7789_IO_I80_CONFIG_TRANS_QUEUE_DEPTH=10'",
Expand All @@ -45,7 +47,7 @@
"'-D ST7789_DEV_CONFIG_BITS_PER_PIXEL=16'",
"'-D ST7789_DEV_CONFIG_FLAGS_RESET_ACTIVE_HIGH=false'",
"'-D ST7789_DEV_CONFIG_VENDOR_CONFIG=NULL'",
"'-D ST7789_RD=2'",
"'-D ST7789_RD_GPIO=2'",
"'-D LCD_SWAP_XY=false'",
"'-D LCD_MIRROR_X=false'",
"'-D LCD_MIRROR_Y=false'",
Expand Down
5 changes: 5 additions & 0 deletions esp32-2432S024C.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -9,6 +9,8 @@
"'-D ESP32_2432S024C'",
"'-D LCD_WIDTH=240'",
"'-D LCD_HEIGHT=320'",
"'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'",
"'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
"'-D BCKL=27'",
"'-D LCD_ILI9341_SPI'",
"'-D ILI9341_SPI_HOST=SPI2_HOST'",
Expand All @@ -18,6 +20,9 @@
"'-D ILI9341_SPI_BUS_SCLK_IO_NUM=14'",
"'-D ILI9341_SPI_BUS_QUADWP_IO_NUM=GPIO_NUM_NC'",
"'-D ILI9341_SPI_BUS_QUADHD_IO_NUM=GPIO_NUM_NC'",
"'-D ILI9341_SPI_BUS_MAX_TRANSFER_SZ=0'",
"'-D ILI9341_SPI_BUS_FLAGS=0'",
"'-D ILI9341_SPI_BUS_INTR_FLAGS=0'",
"'-D ILI9341_SPI_CONFIG_CS_GPIO_NUM=15'",
"'-D ILI9341_SPI_CONFIG_DC_GPIO_NUM=2'",
"'-D ILI9341_SPI_CONFIG_SPI_MODE=SPI_MODE0'",
Expand Down
5 changes: 5 additions & 0 deletions esp32-2432S024N.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -9,6 +9,8 @@
"'-D ESP32_2432S024N'",
"'-D LCD_WIDTH=240'",
"'-D LCD_HEIGHT=320'",
"'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'",
"'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
"'-D BCKL=27'",
"'-D LCD_ILI9341_SPI'",
"'-D ILI9341_SPI_HOST=SPI2_HOST'",
Expand All @@ -18,6 +20,9 @@
"'-D ILI9341_SPI_BUS_SCLK_IO_NUM=14'",
"'-D ILI9341_SPI_BUS_QUADWP_IO_NUM=GPIO_NUM_NC'",
"'-D ILI9341_SPI_BUS_QUADHD_IO_NUM=GPIO_NUM_NC'",
"'-D ILI9341_SPI_BUS_MAX_TRANSFER_SZ=0'",
"'-D ILI9341_SPI_BUS_FLAGS=0'",
"'-D ILI9341_SPI_BUS_INTR_FLAGS=0'",
"'-D ILI9341_SPI_CONFIG_CS_GPIO_NUM=15'",
"'-D ILI9341_SPI_CONFIG_DC_GPIO_NUM=2'",
"'-D ILI9341_SPI_CONFIG_SPI_MODE=SPI_MODE0'",
Expand Down
5 changes: 5 additions & 0 deletions esp32-2432S024R.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -9,6 +9,8 @@
"'-D ESP32_2432S024R'",
"'-D LCD_WIDTH=240'",
"'-D LCD_HEIGHT=320'",
"'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'",
"'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
"'-D BCKL=27'",
"'-D LCD_ILI9341_SPI'",
"'-D ILI9341_SPI_HOST=SPI2_HOST'",
Expand All @@ -18,6 +20,9 @@
"'-D ILI9341_SPI_BUS_SCLK_IO_NUM=14'",
"'-D ILI9341_SPI_BUS_QUADWP_IO_NUM=GPIO_NUM_NC'",
"'-D ILI9341_SPI_BUS_QUADHD_IO_NUM=GPIO_NUM_NC'",
"'-D ILI9341_SPI_BUS_MAX_TRANSFER_SZ=0'",
"'-D ILI9341_SPI_BUS_FLAGS=0'",
"'-D ILI9341_SPI_BUS_INTR_FLAGS=0'",
"'-D ILI9341_SPI_CONFIG_CS_GPIO_NUM=15'",
"'-D ILI9341_SPI_CONFIG_DC_GPIO_NUM=2'",
"'-D ILI9341_SPI_CONFIG_SPI_MODE=SPI_MODE0'",
Expand Down
5 changes: 5 additions & 0 deletions esp32-2432S028R.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -9,6 +9,8 @@
"'-D ESP32_2432S028R'",
"'-D LCD_WIDTH=240'",
"'-D LCD_HEIGHT=320'",
"'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'",
"'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
"'-D BCKL=21'",
"'-D LCD_ILI9341_SPI'",
"'-D ILI9341_SPI_HOST=SPI2_HOST'",
Expand All @@ -18,6 +20,9 @@
"'-D ILI9341_SPI_BUS_SCLK_IO_NUM=14'",
"'-D ILI9341_SPI_BUS_QUADWP_IO_NUM=GPIO_NUM_NC'",
"'-D ILI9341_SPI_BUS_QUADHD_IO_NUM=GPIO_NUM_NC'",
"'-D ILI9341_SPI_BUS_MAX_TRANSFER_SZ=0'",
"'-D ILI9341_SPI_BUS_FLAGS=0'",
"'-D ILI9341_SPI_BUS_INTR_FLAGS=0'",
"'-D ILI9341_SPI_CONFIG_CS_GPIO_NUM=15'",
"'-D ILI9341_SPI_CONFIG_DC_GPIO_NUM=2'",
"'-D ILI9341_SPI_CONFIG_SPI_MODE=SPI_MODE0'",
Expand Down
7 changes: 6 additions & 1 deletion esp32-2432S028Rv2.json
View file
Original file line number Diff line number Diff line change
Expand Up @@ -9,6 +9,8 @@
"'-D ESP32_2432S028Rv2'",
"'-D LCD_WIDTH=240'",
"'-D LCD_HEIGHT=320'",
"'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'",
"'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
"'-D BCKL=21'",
"'-D LCD_ILI9341_SPI'",
"'-D ILI9341_SPI_HOST=SPI2_HOST'",
Expand All @@ -18,6 +20,9 @@
"'-D ILI9341_SPI_BUS_SCLK_IO_NUM=14'",
"'-D ILI9341_SPI_BUS_QUADWP_IO_NUM=GPIO_NUM_NC'",
"'-D ILI9341_SPI_BUS_QUADHD_IO_NUM=GPIO_NUM_NC'",
"'-D ILI9341_SPI_BUS_MAX_TRANSFER_SZ=0'",
"'-D ILI9341_SPI_BUS_FLAGS=0'",
"'-D ILI9341_SPI_BUS_INTR_FLAGS=0'",
"'-D ILI9341_SPI_CONFIG_CS_GPIO_NUM=15'",
"'-D ILI9341_SPI_CONFIG_DC_GPIO_NUM=2'",
"'-D ILI9341_SPI_CONFIG_SPI_MODE=SPI_MODE0'",
Expand All @@ -33,7 +38,7 @@
"'-D ILI9341_DEV_CONFIG_COLOR_SPACE=ESP_LCD_COLOR_SPACE_BGR'",
"'-D ILI9341_DEV_CONFIG_BITS_PER_PIXEL=16'",
"'-D ILI9341_DEV_CONFIG_FLAGS_RESET_ACTIVE_HIGH=false'",
"'-D ILI9341_DEV_CONFIG_VENDOR_CONFIG=\"(ili9341_vendor_config_t[]){{.init_cmds=(ili9341_lcd_init_cmd_t[]){{.cmd=0xCF,.data=(uint8_t[]){0x00,0xC1,0x30},.data_bytes=3},{.cmd=0xED,.data=(uint8_t[]){0x64,0x03,0x12,0x81},.data_bytes=4},{.cmd=0xE8,.data=(uint8_t[]){0x85,0x00,0x78},.data_bytes=3},{.cmd=0xCB,.data=(uint8_t[]){0x39,0x2C,0x00,0x34,0x02},.data_bytes=5},{.cmd=0xF7,.data=(uint8_t[]){0x20},.data_bytes=1},{.cmd=0xEA,.data=(uint8_t[]){0x00,0x00},.data_bytes=2},{.cmd=0xC0,.data=(uint8_t[]){0x10},.data_bytes=1},{.cmd=0xC1,.data=(uint8_t[]){0x00},.data_bytes=1},{.cmd=0xC5,.data=(uint8_t[]){0x30,0x30},.data_bytes=2,},{.cmd=0xC7,.data=(uint8_t[]){0xB7},.data_bytes=1},{.cmd=0x3A,.data=(uint8_t[]){0x55},.data_bytes=1},{.cmd=0x36,.data=(uint8_t[]){0x08},.data_bytes=1},{.cmd=0xB1,.data=(uint8_t[]){0x00,0x1a},.data_bytes=2},{.cmd=0xB6,.data=(uint8_t[]){0x08,0x82,0x27},.data_bytes=3},{.cmd=0xF2,.data=(uint8_t[]){0x00},.data_bytes=1},{.cmd=0x26,.data=(uint8_t[]){0x01},.data_bytes=1},{.cmd=0xE0,.data=(uint8_t[]){0x0F,0x2A,0x28,0x08,0x0E,0x08,0x54,0xA9,0x43,0x0A,0x0F,0x00,0x00,0x00,0x00},.data_bytes=15},{.cmd=0xE1,.data=(uint8_t[]){0x00,0x15,0x17,0x07,0x11,0x06,0x2B,0x56,0x3C,0x05,0x10,0x0F,0x3F,0x3F,0x0F},.data_bytes=15},{.cmd=0x2B,.data=(uint8_t[]){0x00,0x00,0x01,0x3F},.data_bytes=4},{.cmd=0x2A,.data=(uint8_t[]){0x00,0x00,0x00,0xEF},.data_bytes=4},{.cmd=0x21},{.cmd=0x11,.delay_ms=120},{.cmd=0x29,.delay_ms=1}},.init_cmds_size=23}}\"'",
"'-D ILI9341_DEV_CONFIG_VENDOR_CONFIG=\"(ili9341_vendor_config_t[]){{.init_cmds=(ili9341_lcd_init_cmd_t[]){{.cmd=0xCF,.data=(uint8_t[]){0x00,0xC1,0x30},.data_bytes=3},{.cmd=0xED,.data=(uint8_t[]){0x64,0x03,0x12,0x81},.data_bytes=4},{.cmd=0xE8,.data=(uint8_t[]){0x85,0x00,0x78},.data_bytes=3},{.cmd=0xCB,.data=(uint8_t[]){0x39,0x2C,0x00,0x34,0x02},.data_bytes=5},{.cmd=0xF7,.data=(uint8_t[]){0x20},.data_bytes=1},{.cmd=0xEA,.data=(uint8_t[]){0x00,0x00},.data_bytes=2},{.cmd=0xC0,.data=(uint8_t[]){0x10},.data_bytes=1},{.cmd=0xC1,.data=(uint8_t[]){0x00},.data_bytes=1},{.cmd=0xC5,.data=(uint8_t[]){0x30,0x30},.data_bytes=2,},{.cmd=0xC7,.data=(uint8_t[]){0xB7},.data_bytes=1},{.cmd=0x3A,.data=(uint8_t[]){0x55},.data_bytes=1},{.cmd=0x36,.data=(uint8_t[]){0x08},.data_bytes=1},{.cmd=0xB1,.data=(uint8_t[]){0x00,0x1A},.data_bytes=2},{.cmd=0xB6,.data=(uint8_t[]){0x08,0x82,0x27},.data_bytes=3},{.cmd=0xF2,.data=(uint8_t[]){0x00},.data_bytes=1},{.cmd=0x26,.data=(uint8_t[]){0x01},.data_bytes=1},{.cmd=0xE0,.data=(uint8_t[]){0x0F,0x2A,0x28,0x08,0x0E,0x08,0x54,0xA9,0x43,0x0A,0x0F,0x00,0x00,0x00,0x00},.data_bytes=15},{.cmd=0xE1,.data=(uint8_t[]){0x00,0x15,0x17,0x07,0x11,0x06,0x2B,0x56,0x3C,0x05,0x10,0x0F,0x3F,0x3F,0x0F},.data_bytes=15},{.cmd=0x2B,.data=(uint8_t[]){0x00,0x00,0x01,0x3F},.data_bytes=4},{.cmd=0x2A,.data=(uint8_t[]){0x00,0x00,0x00,0xEF},.data_bytes=4},{.cmd=0x21},{.cmd=0x11,.delay_ms=120},{.cmd=0x29,.delay_ms=1}},.init_cmds_size=23}}\"'",
"'-D LCD_SWAP_XY=false'",
"'-D LCD_MIRROR_X=true'",
"'-D LCD_MIRROR_Y=false'",
Expand Down
117 changes: 117 additions & 0 deletions esp32-2432S028Rv3.json
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,117 @@
{
"build": {
"arduino": {
"ldscript": "esp32_out.ld"
},
"core": "esp32",
"extra_flags": [
"'-D ARDUINO_ESP32_DEV'",
"'-D ESP32_2432S028Rv3'",
"'-D LCD_WIDTH=240'",
"'-D LCD_HEIGHT=320'",
"'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'",
"'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
"'-D BCKL=21'",
"'-D LCD_ST7789_SPI'",
"'-D ST7789_SPI_HOST=SPI2_HOST'",
"'-D ST7789_SPI_DMA_CHANNEL=SPI_DMA_CH_AUTO'",
"'-D ST7789_SPI_BUS_MOSI_IO_NUM=13'",
"'-D ST7789_SPI_BUS_MISO_IO_NUM=GPIO_NUM_NC'",
"'-D ST7789_SPI_BUS_SCLK_IO_NUM=14'",
"'-D ST7789_SPI_BUS_QUADWP_IO_NUM=GPIO_NUM_NC'",
"'-D ST7789_SPI_BUS_QUADHD_IO_NUM=GPIO_NUM_NC'",
"'-D ST7789_SPI_BUS_MAX_TRANSFER_SZ=0'",
"'-D ST7789_SPI_BUS_FLAGS=0'",
"'-D ST7789_SPI_BUS_INTR_FLAGS=0'",
"'-D ST7789_SPI_CONFIG_CS_GPIO_NUM=15'",
"'-D ST7789_SPI_CONFIG_DC_GPIO_NUM=2'",
"'-D ST7789_SPI_CONFIG_SPI_MODE=SPI_MODE3'",
"'-D ST7789_SPI_CONFIG_PCLK_HZ=24000000'",
"'-D ST7789_SPI_CONFIG_TRANS_QUEUE_DEPTH=10'",
"'-D ST7789_SPI_CONFIG_LCD_CMD_BITS=8'",
"'-D ST7789_SPI_CONFIG_LCD_PARAM_BITS=8'",
"'-D ST7789_SPI_CONFIG_FLAGS_DC_AS_CMD_PHASE=false'",
"'-D ST7789_SPI_CONFIG_FLAGS_DC_LOW_ON_DATA=false'",
"'-D ST7789_SPI_CONFIG_FLAGS_OCTAL_MODE=false'",
"'-D ST7789_SPI_CONFIG_FLAGS_LSB_FIRST=false'",
"'-D ST7789_DEV_CONFIG_RESET_GPIO_NUM=GPIO_NUM_NC'",
"'-D ST7789_DEV_CONFIG_COLOR_SPACE=ESP_LCD_COLOR_SPACE_RGB'",
"'-D ST7789_DEV_CONFIG_BITS_PER_PIXEL=16'",
"'-D ST7789_DEV_CONFIG_FLAGS_RESET_ACTIVE_HIGH=false'",
"'-D ST7789_DEV_CONFIG_VENDOR_CONFIG=NULL'",
"'-D LCD_SWAP_XY=false'",
"'-D LCD_MIRROR_X=false'",
"'-D LCD_MIRROR_Y=false'",
"'-D BOARD_HAS_TOUCH'",
"'-D TOUCH_XPT2046_SPI'",
"'-D XPT2046_SPI_HOST=SPI3_HOST'",
"'-D XPT2046_SPI_DMA_CHANNEL=SPI_DMA_CH_AUTO'",
"'-D XPT2046_SPI_BUS_MOSI_IO_NUM=32'",
"'-D XPT2046_SPI_BUS_MISO_IO_NUM=39'",
"'-D XPT2046_SPI_BUS_SCLK_IO_NUM=25'",
"'-D XPT2046_SPI_BUS_QUADWP_IO_NUM=GPIO_NUM_NC'",
"'-D XPT2046_SPI_BUS_QUADHD_IO_NUM=GPIO_NUM_NC'",
"'-D XPT2046_SPI_CONFIG_CS_GPIO_NUM=33'",
"'-D XPT2046_SPI_CONFIG_DC_GPIO_NUM=GPIO_NUM_NC'",
"'-D XPT2046_SPI_CONFIG_SPI_MODE=SPI_MODE0'",
"'-D XPT2046_SPI_CONFIG_PCLK_HZ=2000000'",
"'-D XPT2046_SPI_CONFIG_TRANS_QUEUE_DEPTH=3'",
"'-D XPT2046_SPI_CONFIG_LCD_CMD_BITS=8'",
"'-D XPT2046_SPI_CONFIG_LCD_PARAM_BITS=8'",
"'-D XPT2046_SPI_CONFIG_FLAGS_DC_AS_CMD_PHASE=false'",
"'-D XPT2046_SPI_CONFIG_FLAGS_DC_LOW_ON_DATA=false'",
"'-D XPT2046_SPI_CONFIG_FLAGS_OCTAL_MODE=false'",
"'-D XPT2046_SPI_CONFIG_FLAGS_LSB_FIRST=false'",
"'-D XPT2046_TOUCH_CONFIG_X_MAX=LCD_WIDTH'",
"'-D XPT2046_TOUCH_CONFIG_Y_MAX=LCD_HEIGHT'",
"'-D XPT2046_TOUCH_CONFIG_RST_GPIO_NUM=GPIO_NUM_NC'",
"'-D XPT2046_TOUCH_CONFIG_INT_GPIO_NUM=36'",
"'-D XPT2046_TOUCH_CONFIG_LEVELS_RESET=0'",
"'-D XPT2046_TOUCH_CONFIG_LEVELS_INTERRUPT=0'",
"'-D TOUCH_SWAP_XY=false'",
"'-D TOUCH_SWAP_X=true'",
"'-D TOUCH_SWAP_Y=false'",
"'-D BOARD_HAS_TF'",
"'-D TF_CS=5'",
"'-D TF_SPI_MOSI=23'",
"'-D TF_SPI_SCLK=18'",
"'-D TF_SPI_MISO=19'",
"'-D BOARD_HAS_RGB_LED'",
"'-D RGB_LED_R=4'",
"'-D RGB_LED_G=16'",
"'-D RGB_LED_B=17'",
"'-D BOARD_HAS_CDS'",
"'-D CDS=34'",
"'-D BOARD_HAS_SPEAK'",
"'-D SPEAK=26'"
],
"f_cpu": "240000000L",
"f_flash": "40000000L",
"flash_mode": "dio",
"mcu": "esp32",
"variant": "esp32"
},
"connectivity": [
"wifi",
"bluetooth",
"ethernet",
"can"
],
"debug": {
"openocd_board": "esp-wroom-32.cfg"
},
"frameworks": [
"arduino",
"espidf"
],
"name": "esp32-2432S028Rv3",
"upload": {
"flash_size": "4MB",
"maximum_ram_size": 327680,
"maximum_size": 4194304,
"require_upload_port": true,
"speed": 460800
},
"url": "https://www.aliexpress.com/item/1005004502250619.html",
"vendor": "Sunton"
}
Loading

0 comments on commit 4aa429f

Please sign in to comment.