Rollup of 11 pull requests #87539
Closed
Rollup of 11 pull requests #87539
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Add aliases for create_dir, create_dir_all, remove_dir, remove_dir_all
The new submodule handling depends on `is_git()` to be accurate to
decide whether it should handle submodules at all or not. Unfortunately,
`is_git()` treated "this directory does not have a git repository" and
"this repository should not be used for SHA/version/commit date info"
the same. This changes it to distinguish the two.
To clarify: ignore_get is set by default whenever channel == "dev", which it is by default whenever you're compiling locally. So basically everyone would hit this, not just people who had explicitly configured ignore_git.
Here's an example of an error this fixes:
```
$ x build
Updating only changed submodules
Submodules updated in 0.01 seconds
Finished dev [unoptimized + debuginfo] target(s) in 0.17s
warning: x.py has made several changes recently you may want to look at
help: consider looking at the changes in `src/bootstrap/CHANGELOG.md`
note: to silence this warning, add `changelog-seen = 2` at the top of `config.toml`
Building stage0 std artifacts (x86_64-unknown-linux-gnu -> x86_64-unknown-linux-gnu)
Finished release [optimized] target(s) in 0.16s
Copying stage0 std from stage0 (x86_64-unknown-linux-gnu -> x86_64-unknown-linux-gnu / x86_64-unknown-linux-gnu)
Building LLVM for x86_64-unknown-linux-gnu
detected home dir change, cleaning out entire build directory
running: "cmake" "/home/joshua/rustc3/src/llvm-project/llvm" "-G" "Ninja" "-DLLVM_ENABLE_ASSERTIONS=OFF" "-DLLVM_TARGETS_TO_BUILD=AArch64;ARM;BPF;Hexagon;MSP430;Mips;NVPTX;PowerPC;RISCV;Sparc;SystemZ;WebAssembly;X86" "-DLLVM_EXPERIMENTAL_TARGETS_TO_BUILD=AVR" "-DLLVM_INCLUDE_EXAMPLES=OFF" "-DLLVM_INCLUDE_DOCS=OFF" "-DLLVM_INCLUDE_BENCHMARKS=OFF" "-DLLVM_ENABLE_TERMINFO=OFF" "-DLLVM_ENABLE_LIBEDIT=OFF" "-DLLVM_ENABLE_BINDINGS=OFF" "-DLLVM_ENABLE_Z3_SOLVER=OFF" "-DLLVM_PARALLEL_COMPILE_JOBS=48" "-DLLVM_TARGET_ARCH=x86_64" "-DLLVM_DEFAULT_TARGET_TRIPLE=x86_64-unknown-linux-gnu" "-DLLVM_ENABLE_ZLIB=ON" "-DLLVM_ENABLE_LIBXML2=OFF" "-DLLVM_VERSION_SUFFIX=-rust-dev" "-DCMAKE_INSTALL_MESSAGE=LAZY" "-DCMAKE_C_COMPILER=gcc" "-DCMAKE_CXX_COMPILER=g++" "-DCMAKE_ASM_COMPILER=gcc" "-DCMAKE_C_FLAGS=-ffunction-sections -fdata-sections -fPIC -m64" "-DCMAKE_CXX_FLAGS=-ffunction-sections -fdata-sections -fPIC -m64" "-DCMAKE_INSTALL_PREFIX=/home/joshua/rustc3/build/x86_64-unknown-linux-gnu/llvm" "-DCMAKE_ASM_FLAGS= -ffunction-sections -fdata-sections -fPIC -m64" "-DCMAKE_BUILD_TYPE=Release"
CMake Error: The source directory "/home/joshua/rustc3/src/llvm-project/llvm" does not exist.
Specify --help for usage, or press the help button on the CMake GUI.
thread 'main' panicked at '
command did not execute successfully, got: exit status: 1
build script failed, must exit now', /home/joshua/.local/lib/cargo/registry/src/github.aaakk.us.kg-1ecc6299db9ec823/cmake-0.1.44/src/lib.rs:885:5
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
finished in 0.783 seconds
Build completed unsuccessfully in 0:00:01
```
This reverts commit 30b82e0.
When determining which LLVM artifacts to download, bootstrap.py calls: `git log --author=bors --format=%H -n1 -m --first-parent -- src/llvm-project src/bootstrap/download-ci-llvm-stamp src/version`. However, the `-m` option has no effect, per the `git log` help: > -m > This option makes diff output for merge commits to be shown in the > default format. -m will produce the output only if -p is given as > well. The default format could be changed using log.diffMerges > configuration parameter, which default value is separate. Accordingly, this commit removes use of the -m option in favor of `--no-patch`, to make clear that this command should never output diff information, as the SHA-1 hash is the only desired output. Tested using git 2.32, this does not change the output of the command. The motivation for this change is that some patched versions of git change the behavior of the `-m` flag to imply `-p`, rather than to do nothing unless `-p` is passed. These patched versions of git lead to this script not working. Google's corp-provided git is one such example.
Stop creating a reference then immediately dereferencing it.
Add doc aliases to fs.rs Add aliases for create_dir, create_dir_all, remove_dir, remove_dir_all
…wesleywiser Add docs for raw-dylib to unstable book
…r=JohnTitor Use hashbrown's `extend_reserve()` in `HashMap` When we added `extend_reserve()` to our implementation of `Extend` for `HashMap`, hashbrown didn't have a version we could use. Now that hashbrown has added it, we should use its version instead of implementing it ourself.
Don't treat git repos as non-existent when `ignore_git` is set
The new submodule handling depends on `is_git()` to be accurate to
decide whether it should handle submodules at all or not. Unfortunately,
`is_git()` treated "this directory does not have a git repository" and
"this repository should not be used for SHA/version/commit date info"
the same. This changes it to distinguish the two.
To clarify: ignore_get is set by default whenever channel == "dev", which it is by default whenever you're compiling locally. So basically everyone would hit this, not just people who had explicitly configured ignore_git.
Here's an example of an error this fixes:
```
$ x build
Updating only changed submodules
Submodules updated in 0.01 seconds
Finished dev [unoptimized + debuginfo] target(s) in 0.17s
warning: x.py has made several changes recently you may want to look at
help: consider looking at the changes in `src/bootstrap/CHANGELOG.md`
note: to silence this warning, add `changelog-seen = 2` at the top of `config.toml`
Building stage0 std artifacts (x86_64-unknown-linux-gnu -> x86_64-unknown-linux-gnu)
Finished release [optimized] target(s) in 0.16s
Copying stage0 std from stage0 (x86_64-unknown-linux-gnu -> x86_64-unknown-linux-gnu / x86_64-unknown-linux-gnu)
Building LLVM for x86_64-unknown-linux-gnu
detected home dir change, cleaning out entire build directory
running: "cmake" "/home/joshua/rustc3/src/llvm-project/llvm" "-G" "Ninja" "-DLLVM_ENABLE_ASSERTIONS=OFF" "-DLLVM_TARGETS_TO_BUILD=AArch64;ARM;BPF;Hexagon;MSP430;Mips;NVPTX;PowerPC;RISCV;Sparc;SystemZ;WebAssembly;X86" "-DLLVM_EXPERIMENTAL_TARGETS_TO_BUILD=AVR" "-DLLVM_INCLUDE_EXAMPLES=OFF" "-DLLVM_INCLUDE_DOCS=OFF" "-DLLVM_INCLUDE_BENCHMARKS=OFF" "-DLLVM_ENABLE_TERMINFO=OFF" "-DLLVM_ENABLE_LIBEDIT=OFF" "-DLLVM_ENABLE_BINDINGS=OFF" "-DLLVM_ENABLE_Z3_SOLVER=OFF" "-DLLVM_PARALLEL_COMPILE_JOBS=48" "-DLLVM_TARGET_ARCH=x86_64" "-DLLVM_DEFAULT_TARGET_TRIPLE=x86_64-unknown-linux-gnu" "-DLLVM_ENABLE_ZLIB=ON" "-DLLVM_ENABLE_LIBXML2=OFF" "-DLLVM_VERSION_SUFFIX=-rust-dev" "-DCMAKE_INSTALL_MESSAGE=LAZY" "-DCMAKE_C_COMPILER=gcc" "-DCMAKE_CXX_COMPILER=g++" "-DCMAKE_ASM_COMPILER=gcc" "-DCMAKE_C_FLAGS=-ffunction-sections -fdata-sections -fPIC -m64" "-DCMAKE_CXX_FLAGS=-ffunction-sections -fdata-sections -fPIC -m64" "-DCMAKE_INSTALL_PREFIX=/home/joshua/rustc3/build/x86_64-unknown-linux-gnu/llvm" "-DCMAKE_ASM_FLAGS= -ffunction-sections -fdata-sections -fPIC -m64" "-DCMAKE_BUILD_TYPE=Release"
CMake Error: The source directory "/home/joshua/rustc3/src/llvm-project/llvm" does not exist.
Specify --help for usage, or press the help button on the CMake GUI.
thread 'main' panicked at '
command did not execute successfully, got: exit status: 1
build script failed, must exit now', /home/joshua/.local/lib/cargo/registry/src/github.aaakk.us.kg-1ecc6299db9ec823/cmake-0.1.44/src/lib.rs:885:5
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
finished in 0.783 seconds
Build completed unsuccessfully in 0:00:01
```
I *believe* this regression was only introduced in rust-lang#87380, not rust-lang#82653. `@petrochenkov` can you check that this fixes the issue you encountered in rust-lang#82653 (comment) ?
r? `@Mark-Simulacrum`
Suggest removing unnecessary &mut as help message Closes rust-lang#68697
Document math behind MIN/MAX consts on integers
Currently the documentation for `[integer]::{MIN, MAX}` doesn't explain where the constants come from. This documents how the values of those constants are related to powers of 2.
Remove min_type_alias_impl_trait in favor of type_alias_impl_trait r? `@oli-obk`
…=dtolnay SGX mutex is *not* moveable Reverts the erroneous change in rust-lang#85029.
…n514 bootstrap.py: change `git log` option to indicate desired behavior When determining which LLVM artifacts to download, bootstrap.py calls: `git log --author=bors --format=%H -n1 -m --first-parent -- src/llvm-project src/bootstrap/download-ci-llvm-stamp src/version`. However, the `-m` option has no effect, per the `git log` help: > -m > This option makes diff output for merge commits to be shown in the > default format. -m will produce the output only if -p is given as > well. The default format could be changed using log.diffMerges > configuration parameter, which default value is separate. Accordingly, this commit removes use of the -m option in favor of ~~`--diff-merges=off`~~ `--no-patch`, since no diff information is needed, and in fact the presence of a diff breaks the command. Tested using git 2.32, this does not change the output of the command. The motivation for this change is that some patched versions of git change the behavior of the `-m` flag to imply `-p`, rather than to do nothing unless `-p` is passed. These patched versions of git lead to this script not working. Google's corp-provided git is one such example.
Stop creating a reference then immediately dereferencing it. Stop creating a reference then immediately dereferencing it.
Fix ICE in `diagnostic_hir_wf_check` Fixes rust-lang#87495. The [documentation for `ObligationCauseCode::WellFormed`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_infer/traits/enum.ObligationCauseCode.html#variant.WellFormed) says that > it is always correct [...] to specify `WellFormed(None)` instead of `WellFormed(Some(...))`, which seems to have caused the issue here, as `diagnostic_hir_wf_check` does not expect to be called with an associated constant and will ICE: https://github.com/rust-lang/rust/blob/fd853c00e255559255885aadff9e93a1760c8728/compiler/rustc_typeck/src/hir_wf_check.rs#L131-L134 Therefore, I have changed `check_associated_item()` to pass a `WellFormed(None)` for associated constants. r? `@Aaron1011`
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Successful merges:
extend_reserve()inHashMap#87330 (Use hashbrown'sextend_reserve()inHashMap)ignore_gitis set #87443 (Don't treat git repos as non-existent whenignore_gitis set)git logoption to indicate desired behavior #87513 (bootstrap.py: changegit logoption to indicate desired behavior)diagnostic_hir_wf_check#87524 (Fix ICE indiagnostic_hir_wf_check)Failed merges:
r? @ghost
@rustbot modify labels: rollup
Create a similar rollup