Rollup of 7 pull requests

mk/tests.mk

@@ -569,6 +569,11 @@ ifeq ($(CFG_OSTYPE),apple-darwin)
 CTEST_DISABLE_debuginfo-gdb = "gdb on darwin needs root"
 endif
 
+ifeq ($(findstring android, $(CFG_TARGET)), android)
+CTEST_DISABLE_debuginfo-gdb =
+CTEST_DISABLE_debuginfo-lldb = "lldb tests are disabled on android"
+endif
+
 # CTEST_DISABLE_NONSELFHOST_$(TEST_GROUP), if set, will cause that
 # test group to be disabled *unless* the target is able to build a
 # compiler (i.e. when the target triple is in the set of of host

src/doc/trpl/README.md

@@ -29,7 +29,12 @@ and will be able to understand most Rust code and write more complex programs.
 
 In a similar fashion to "Intermediate," this section is full of individual,
 deep-dive chapters, which stand alone and can be read in any order. These
-chapters focus on the most complex features, as well as some things that
-are only available in upcoming versions of Rust.
+chapters focus on the most complex features,
 
-After reading "Advanced," you'll be a Rust expert!
+<h2 class="section-header"><a href="unstable.html">Unstable</a></h2>
+
+In a similar fashion to "Intermediate," this section is full of individual,
+deep-dive chapters, which stand alone and can be read in any order.
+
+This chapter contains things that are only available on the nightly channel of
+Rust.

src/doc/trpl/SUMMARY.md

@@ -36,6 +36,12 @@
     * [FFI](ffi.md)
     * [Unsafe Code](unsafe.md)
     * [Advanced Macros](advanced-macros.md)
+* [Unstable Rust](unstable.md)
     * [Compiler Plugins](plugins.md)
+    * [Inline Assembly](inline-assembly.md)
+    * [No stdlib](no-stdlib.md)
+    * [Intrinsics](intrinsics.md)
+    * [Lang items](lang-items.md)
+    * [Link args](link-args.md)
 * [Conclusion](conclusion.md)
 * [Glossary](glossary.md)

src/doc/trpl/advanced-macros.md

@@ -206,8 +206,6 @@ the [Bitwise Cyclic Tag](http://esolangs.org/wiki/Bitwise_Cyclic_Tag) automaton
 within Rust's macro system.
 
 ```rust
-#![feature(trace_macros)]
-
 macro_rules! bct {
     // cmd 0:  d ... => ...
     (0, $($ps:tt),* ; $_d:tt)
@@ -229,13 +227,6 @@ macro_rules! bct {
     ( $($ps:tt),* ; )
         => (());
 }
-
-fn main() {
-    trace_macros!(true);
-# /* just check the definition
-    bct!(0, 0, 1, 1, 1 ; 1, 0, 1);
-# */
-}
 ```
 
 Exercise: use macros to reduce duplication in the above definition of the

src/doc/trpl/ffi.md

@@ -366,31 +366,6 @@ A few examples of how this model can be used are:
 
 On OSX, frameworks behave with the same semantics as a dynamic library.
 
-## The `link_args` attribute
-
-There is one other way to tell rustc how to customize linking, and that is via
-the `link_args` attribute. This attribute is applied to `extern` blocks and
-specifies raw flags which need to get passed to the linker when producing an
-artifact. An example usage would be:
-
-``` no_run
-#![feature(link_args)]
-
-#[link_args = "-foo -bar -baz"]
-extern {}
-# fn main() {}
-```
-
-Note that this feature is currently hidden behind the `feature(link_args)` gate
-because this is not a sanctioned way of performing linking. Right now rustc
-shells out to the system linker, so it makes sense to provide extra command line
-arguments, but this will not always be the case. In the future rustc may use
-LLVM directly to link native libraries in which case `link_args` will have no
-meaning.
-
-It is highly recommended to *not* use this attribute, and rather use the more
-formal `#[link(...)]` attribute on `extern` blocks instead.
-
 # Unsafe blocks
 
 Some operations, like dereferencing unsafe pointers or calling functions that have been marked

src/doc/trpl/inline-assembly.md

@@ -0,0 +1,141 @@
+% Inline Assembly
+
+For extremely low-level manipulations and performance reasons, one
+might wish to control the CPU directly. Rust supports using inline
+assembly to do this via the `asm!` macro. The syntax roughly matches
+that of GCC & Clang:
+
+```ignore
+asm!(assembly template
+   : output operands
+   : input operands
+   : clobbers
+   : options
+   );
+```
+
+Any use of `asm` is feature gated (requires `#![feature(asm)]` on the
+crate to allow) and of course requires an `unsafe` block.
+
+> **Note**: the examples here are given in x86/x86-64 assembly, but
+> all platforms are supported.
+
+## Assembly template
+
+The `assembly template` is the only required parameter and must be a
+literal string (i.e. `""`)
+
+```
+#![feature(asm)]
+
+#[cfg(any(target_arch = "x86", target_arch = "x86_64"))]
+fn foo() {
+    unsafe {
+        asm!("NOP");
+    }
+}
+
+// other platforms
+#[cfg(not(any(target_arch = "x86", target_arch = "x86_64")))]
+fn foo() { /* ... */ }
+
+fn main() {
+    // ...
+    foo();
+    // ...
+}
+```
+
+(The `feature(asm)` and `#[cfg]`s are omitted from now on.)
+
+Output operands, input operands, clobbers and options are all optional
+but you must add the right number of `:` if you skip them:
+
+```
+# #![feature(asm)]
+# #[cfg(any(target_arch = "x86", target_arch = "x86_64"))]
+# fn main() { unsafe {
+asm!("xor %eax, %eax"
+    :
+    :
+    : "eax"
+   );
+# } }
+```
+
+Whitespace also doesn't matter:
+
+```
+# #![feature(asm)]
+# #[cfg(any(target_arch = "x86", target_arch = "x86_64"))]
+# fn main() { unsafe {
+asm!("xor %eax, %eax" ::: "eax");
+# } }
+```
+
+## Operands
+
+Input and output operands follow the same format: `:
+"constraints1"(expr1), "constraints2"(expr2), ..."`. Output operand
+expressions must be mutable lvalues:
+
+```
+# #![feature(asm)]
+# #[cfg(any(target_arch = "x86", target_arch = "x86_64"))]
+fn add(a: i32, b: i32) -> i32 {
+    let mut c = 0;
+    unsafe {
+        asm!("add $2, $0"
+             : "=r"(c)
+             : "0"(a), "r"(b)
+             );
+    }
+    c
+}
+# #[cfg(not(any(target_arch = "x86", target_arch = "x86_64")))]
+# fn add(a: i32, b: i32) -> i32 { a + b }
+
+fn main() {
+    assert_eq!(add(3, 14159), 14162)
+}
+```
+
+## Clobbers
+
+Some instructions modify registers which might otherwise have held
+different values so we use the clobbers list to indicate to the
+compiler not to assume any values loaded into those registers will
+stay valid.
+
+```
+# #![feature(asm)]
+# #[cfg(any(target_arch = "x86", target_arch = "x86_64"))]
+# fn main() { unsafe {
+// Put the value 0x200 in eax
+asm!("mov $$0x200, %eax" : /* no outputs */ : /* no inputs */ : "eax");
+# } }
+```
+
+Input and output registers need not be listed since that information
+is already communicated by the given constraints. Otherwise, any other
+registers used either implicitly or explicitly should be listed.
+
+If the assembly changes the condition code register `cc` should be
+specified as one of the clobbers. Similarly, if the assembly modifies
+memory, `memory` should also be specified.
+
+## Options
+
+The last section, `options` is specific to Rust. The format is comma
+separated literal strings (i.e. `:"foo", "bar", "baz"`). It's used to
+specify some extra info about the inline assembly:
+
+Current valid options are:
+
+1. *volatile* - specifying this is analogous to
+   `__asm__ __volatile__ (...)` in gcc/clang.
+2. *alignstack* - certain instructions expect the stack to be
+   aligned a certain way (i.e. SSE) and specifying this indicates to
+   the compiler to insert its usual stack alignment code
+3. *intel* - use intel syntax instead of the default AT&T.
+

src/doc/trpl/intrinsics.md

@@ -0,0 +1,25 @@
+% Intrinsics
+
+> **Note**: intrinsics will forever have an unstable interface, it is
+> recommended to use the stable interfaces of libcore rather than intrinsics
+> directly.
+
+These are imported as if they were FFI functions, with the special
+`rust-intrinsic` ABI. For example, if one was in a freestanding
+context, but wished to be able to `transmute` between types, and
+perform efficient pointer arithmetic, one would import those functions
+via a declaration like
+
+```
+# #![feature(intrinsics)]
+# fn main() {}
+
+extern "rust-intrinsic" {
+    fn transmute<T, U>(x: T) -> U;
+
+    fn offset<T>(dst: *const T, offset: isize) -> *const T;
+}
+```
+
+As with any other FFI functions, these are always `unsafe` to call.
+

src/doc/trpl/lang-items.md

@@ -0,0 +1,79 @@
+% Lang items
+
+> **Note**: lang items are often provided by crates in the Rust distribution,
+> and lang items themselves have an unstable interface. It is recommended to use
+> officially distributed crates instead of defining your own lang items.
+
+The `rustc` compiler has certain pluggable operations, that is,
+functionality that isn't hard-coded into the language, but is
+implemented in libraries, with a special marker to tell the compiler
+it exists. The marker is the attribute `#[lang="..."]` and there are
+various different values of `...`, i.e. various different 'lang
+items'.
+
+For example, `Box` pointers require two lang items, one for allocation
+and one for deallocation. A freestanding program that uses the `Box`
+sugar for dynamic allocations via `malloc` and `free`:
+
+```
+#![feature(lang_items, box_syntax, start, no_std)]
+#![no_std]
+
+extern crate libc;
+
+extern {
+    fn abort() -> !;
+}
+
+#[lang = "owned_box"]
+pub struct Box<T>(*mut T);
+
+#[lang="exchange_malloc"]
+unsafe fn allocate(size: usize, _align: usize) -> *mut u8 {
+    let p = libc::malloc(size as libc::size_t) as *mut u8;
+
+    // malloc failed
+    if p as usize == 0 {
+        abort();
+    }
+
+    p
+}
+#[lang="exchange_free"]
+unsafe fn deallocate(ptr: *mut u8, _size: usize, _align: usize) {
+    libc::free(ptr as *mut libc::c_void)
+}
+
+#[start]
+fn main(argc: isize, argv: *const *const u8) -> isize {
+    let x = box 1;
+
+    0
+}
+
+#[lang = "stack_exhausted"] extern fn stack_exhausted() {}
+#[lang = "eh_personality"] extern fn eh_personality() {}
+#[lang = "panic_fmt"] fn panic_fmt() -> ! { loop {} }
+```
+
+Note the use of `abort`: the `exchange_malloc` lang item is assumed to
+return a valid pointer, and so needs to do the check internally.
+
+Other features provided by lang items include:
+
+- overloadable operators via traits: the traits corresponding to the
+  `==`, `<`, dereferencing (`*`) and `+` (etc.) operators are all
+  marked with lang items; those specific four are `eq`, `ord`,
+  `deref`, and `add` respectively.
+- stack unwinding and general failure; the `eh_personality`, `fail`
+  and `fail_bounds_checks` lang items.
+- the traits in `std::marker` used to indicate types of
+  various kinds; lang items `send`, `sync` and `copy`.
+- the marker types and variance indicators found in
+  `std::marker`; lang items `covariant_type`,
+  `contravariant_lifetime`, etc.
+
+Lang items are loaded lazily by the compiler; e.g. if one never uses
+`Box` then there is no need to define functions for `exchange_malloc`
+and `exchange_free`. `rustc` will emit an error when an item is needed
+but not found in the current crate or any that it depends on.

src/doc/trpl/link-args.md

@@ -0,0 +1,25 @@
+% Link args
+
+There is one other way to tell rustc how to customize linking, and that is via
+the `link_args` attribute. This attribute is applied to `extern` blocks and
+specifies raw flags which need to get passed to the linker when producing an
+artifact. An example usage would be:
+
+``` no_run
+#![feature(link_args)]
+
+#[link_args = "-foo -bar -baz"]
+extern {}
+# fn main() {}
+```
+
+Note that this feature is currently hidden behind the `feature(link_args)` gate
+because this is not a sanctioned way of performing linking. Right now rustc
+shells out to the system linker, so it makes sense to provide extra command line
+arguments, but this will not always be the case. In the future rustc may use
+LLVM directly to link native libraries in which case `link_args` will have no
+meaning.
+
+It is highly recommended to *not* use this attribute, and rather use the more
+formal `#[link(...)]` attribute on `extern` blocks instead.
+