Rollup of 5 pull requests #126824
Merged
Rollup of 5 pull requests #126824
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
When we have long code skips, we write `...` in the line number gutter. For suggestions, we were "centering" the `...` with the line, but that was consistent with what we do in every other case.
This function both handles error printing and early/late failures, but it also always returns the actual output of the command
…nieu Add `f16` inline ASM support for 32-bit ARM Adds `f16` inline ASM support for 32-bit ARM. SIMD vector types are taken from [here](https://developer.arm.com/architectures/instruction-sets/intrinsics/#f:`@navigationhierarchiesreturnbasetype=[float]&f:@navigationhierarchieselementbitsize=[16]&f:@navigationhierarchiesarchitectures=[A32]).` Relevant issue: rust-lang#125398 Tracking issue: rust-lang#116909 `@rustbot` label +F-f16_and_f128
…=compiler-errors
Add `#[rustc_dump_{predicates,item_bounds}]`
Conflicts with rust-lang#126668.
As discussed
r? compiler-errors CC ``@fee1-dead``
Fix `...` in multline code-skips in suggestions When we have long code skips, we write `...` in the line number gutter. For suggestions, we were "centering" the `...` with the line, but that was inconsistent with what we do in every other case *and* off-center.
…nur-ozkan Bootstrap command refactoring: refactor `BootstrapCommand` (step 1) This PR is a first step towards https://rust-lang.zulipchat.com/#narrow/stream/326414-t-infra.2Fbootstrap. It refactors `BoostrapCommand` to get it closer to a state where it is an actual command wrapper that can be routed through a central place of command execution, and also to make the distinction between printing output vs handling output programatically clearer (since now it's a mess). The existing usages of `BootstrapCommand` are complicated primarily because of different ways of handling output. There are commands that: 1) Want to eagerly print stdout/stderr of the executed command, plus print an error message if the command fails (output mode `PrintAll`). Note that this error message attempts to print stdout/stderr of the command when `-v` is enabled, but that will always be empty, since this mode uses `.status()` and not `.output()`. 2) Want to eagerly print stdout/stderr of the executed command, but do not print any additional error message if it fails (output mode `PrintOutput`) 3) Want to capture stdout/stderr of the executed command, but print an error message if it fails (output mode `PrintFailure`). This means that the user wants to either ignore the output or handle it programatically, but that's not obvious from the name. The difference between 1) and 2) (unless explicitly specified) is determined dynamically based on the bootstrap verbosity level. It is very difficult for me to wrap my head around all these modes. I think that in a future PR, we should split these axes into e.g. this: 1) Do I want to handle the output programmatically or print it to the terminal? This should be a separate axis, true/false. (Note that "hiding the output" essentially just means saying that I handle it programmatically, and then I ignore the output). 2) Do I want to print a message if the command fails? Yes/No/Based on verbosity (which would be the default). Then there is also the failure mode, but that is relatively simple to handle, the command execution will just shutdown bootstrap (either eagerly or late) when the command fails. Note that this is just a first refactoring steps, there are a lot of other things to be done, so some things might not look "final" yet. The next steps are (not necessarily in this order): - Remove `run` and `run_cmd` and implement everything in terms of `run_tracked` and rename `run_tracked` to `run` - Implement the refactoring specified above (change how output modes work) - Modify `BootstrapCmd` so that it stores `Command` instead of `&mut Command` and remove all the annoying `BootstrapCmd::from` by changing `Command::new` to `BootstrapCmd::new` - Refactor the rest of command executions not currently using `BootstrapCmd` that can access Builder to use the correct output and failure modes. This will include passing Builder to additional places. - Handle the most complex cases, such as output streaming. That will probably need to be handled separately. - Refactor the rest of commands that cannot access builder (e.g. `Config::parse`) by introducing a new command context that will be passed to these places, and then stored in `Builder`. Move certain fields (such as `fail_fast`) from `Builder` to the command context. - Handle the co-operation of `Builder`, `Build`, `Config` and command context. There are some fields and logic used during command execution that are distributed amongst `Builder/Build/Config`, so it will require some refactoring to make it work if the execution will happen on a separate place (in the command context). - Refactor logging of commands, so that it is either logged to a file or printed in a nice hierarchical way that cooperates with the `Step` debug hierarchical output. - Implement profiling of commands (add command durations to the command log, print a log of slowest commands and their execution counts at the end of bootstrap execution, perhaps store command executions to `metrics.json`). - Implement caching of commands. - Implement testing of commands through snapshot tests/mocking. Best reviewed commit by commit. r? ``@onur-ozkan``
…line-always-many-cgu, r=Kobzol Migrate `run-make/inline-always-many-cgu` to `rmake.rs` Part of rust-lang#121876. r? `@jieyouxu`
rustbot
added
A-run-make
|
@bors r+ p=5 rollup=never |
bors
added
S-waiting-on-bors
|
☀️ Test successful - checks-actions |
|
📌 Perf builds for each rolled up PR:
previous master: d03d6c0fea In the case of a perf regression, run the following command for each PR you suspect might be the cause: |
|
Finished benchmarking commit (ac47dba): comparison URL. Overall result: no relevant changes - no action needed@rustbot label: -perf-regression Instruction countThis benchmark run did not return any relevant results for this metric. Max RSS (memory usage)Results (secondary 5.3%)This is a less reliable metric that may be of interest but was not used to determine the overall result at the top of this comment.
CyclesThis benchmark run did not return any relevant results for this metric. Binary sizeThis benchmark run did not return any relevant results for this metric. Bootstrap: 693.955s -> 694.577s (0.09%) |
jaisnan
pushed a commit
to jaisnan/rust-dev
that referenced
this pull request
Jul 29, 2024
Update Rust toolchain from nightly-2024-06-22 to nightly-2024-06-23 without any other source changes. This is an automatically generated pull request. If any of the CI checks fail, manual intervention is required. In such a case, review the changes at https://github.com/rust-lang/rust from rust-lang@c1b336c up to rust-lang@3cb521a. The log for this commit range is: rust-lang@3cb521a434 Auto merge of rust-lang#126761 - GuillaumeGomez:unsafe_extern_blocks, r=spastorino rust-lang@a0f01c3c10 Auto merge of rust-lang#126838 - matthiaskrgr:rollup-qkop22o, r=matthiaskrgr rust-lang@dc9a08f535 Rollup merge of rust-lang#126552 - fee1-dead-contrib:rmfx, r=compiler-errors rust-lang@162120b4fa Rollup merge of rust-lang#126318 - Kobzol:bootstrap-perf, r=onur-ozkan rust-lang@f3ced9d540 Rollup merge of rust-lang#126140 - eduardosm:stabilize-fs_try_exists, r=Amanieu rust-lang@f944afe380 Auto merge of rust-lang#116113 - kpreid:arcmut, r=dtolnay rust-lang@88c3db57e4 Generalize `{Rc,Arc}::make_mut()` to unsized types. rust-lang@a9a4830d25 Replace `WriteCloneIntoRaw` with `CloneToUninit`. rust-lang@ec201b8650 Add `core::clone::CloneToUninit`. rust-lang@81da6a6d40 Make `effects` an incomplete feature rust-lang@ac47dbad50 Auto merge of rust-lang#126824 - GuillaumeGomez:rollup-sybv8o7, r=GuillaumeGomez rust-lang@d265538016 Rollup merge of rust-lang#126823 - GuillaumeGomez:migrate-run-make-inline-always-many-cgu, r=Kobzol rust-lang@25bcc7d130 Rollup merge of rust-lang#126731 - Kobzol:bootstrap-cmd-refactor, r=onur-ozkan rust-lang@399c5cabdd Rollup merge of rust-lang#126723 - estebank:dot-dot-dot, r=Nadrieril rust-lang@3ed2cd74b5 Rollup merge of rust-lang#126686 - fmease:dump-preds-n-item-bounds, r=compiler-errors rust-lang@07e8b3ac01 Rollup merge of rust-lang#126555 - beetrees:f16-inline-asm-arm, r=Amanieu rust-lang@d03d6c0fea Auto merge of rust-lang#126750 - scottmcm:less-unlikely, r=jhpratt rust-lang@e7dfd4a913 Migrate `run-make/inline-always-many-cgu` to `rmake.rs` rust-lang@d9962bb4d8 Make `read_dir` method take a mutable callback rust-lang@f1b0d54ca9 Auto merge of rust-lang#126816 - weihanglo:update-cargo, r=weihanglo rust-lang@0bd58d8122 Apply review comments. rust-lang@250586cb2e Wrap std `Output` in `CommandOutput` rust-lang@f0aceed540 Auto merge of rust-lang#126817 - workingjubilee:rollup-0rg0k55, r=workingjubilee rust-lang@38bd7a0fcb Add `#[rustc_dump_{predicates,item_bounds}]` rust-lang@1916b3d57f Rollup merge of rust-lang#126811 - compiler-errors:tidy-ftl, r=estebank rust-lang@539090e5cd Rollup merge of rust-lang#126809 - estebank:wording-tweak, r=oli-obk rust-lang@b9ab6c3501 Rollup merge of rust-lang#126798 - miguelfrde:master, r=tmandry rust-lang@9498d5cf2f Rollup merge of rust-lang#126787 - Strophox:get-bytes, r=RalfJung rust-lang@1f9793f1aa Rollup merge of rust-lang#126722 - adwinwhite:ptr_fn_abi, r=celinval rust-lang@84b0922565 Rollup merge of rust-lang#126712 - Oneirical:bootest-constestllation, r=jieyouxu rust-lang@e7956cd994 Rollup merge of rust-lang#126530 - beetrees:f16-inline-asm-riscv, r=Amanieu rust-lang@10e1f5d212 Auto merge of rust-lang#124101 - the8472:pidfd-methods, r=cuviper rust-lang@2c65a24b8c Update cargo rust-lang@fcae62649e Auto merge of rust-lang#126758 - spastorino:avoid-safe-outside-unsafe-blocks, r=compiler-errors rust-lang@ffd72b1700 Fix remaining cases rust-lang@ea681ef281 Add a tidy rule to make sure that diagnostics don't end in periods rust-lang@8abf149bde to extract a pidfd we must consume the child rust-lang@0787c7308c Add PidFd::{kill, wait, try_wait} rust-lang@5d5892e966 Remove stray `.` from error message rust-lang@d94a40516e [fuchsia-test-runner] Remove usage of kw_only rust-lang@771e44ebd3 Add `f16` inline ASM support for RISC-V rust-lang@753fb070bb Add `f16` inline ASM support for 32-bit ARM rust-lang@22831ed117 Do not allow safe usafe on static and fn items rust-lang@a6a83d3d4e bless tests rust-lang@b512bf6f77 add as_ptr to trait AllocBytes, fix 2 impls; add pub fn get_bytes_unchecked_raw in allocation.rs; add pub fn get_alloc_bytes_unchecked_raw[_mut] in memory.rs rust-lang@02aaea1803 update intrinsic const param counting rust-lang@3b14b756d8 Remove `feature(effects)` from the standard library rust-lang@a314f7363a Stop using `unlikely` in `strict_*` methods rust-lang@225796a2df Add method to get `FnAbi` of function pointer rust-lang@630c3adb14 Add regression test for `unsafe_extern_blocks` rust-lang@bb9a3ef90c Implement `unsafe_extern_blocks` feature in rustdoc rust-lang@3c0a4bc915 rewrite crate-name-priority to rmake rust-lang@bc12972bcd Slightly refactor the dumping of HIR analysis data rust-lang@3fe4d134dd Appease `clippy` rust-lang@c15293407f Remove unused import rust-lang@5c4318d02c Implement `run_cmd` in terms of `run_tracked` rust-lang@0de7b92cc6 Remove `run_delaying_failure` rust-lang@e933cfb13c Remove `run_quiet_delaying_failure` rust-lang@949e667d3f Remove `run_quiet` rust-lang@a12f541a18 Implement new command execution logic rust-lang@9fd7784b97 Fix `...` in multline code-skips in suggestions rust-lang@f22b5afa6a rewrite error-writing-dependencies to rmake rust-lang@75ee1d74a9 rewrite relocation-model to rmake rust-lang@87d2e61428 Add `x perf` command for profiling the compiler using `rustc-perf` rust-lang@fd44aca2aa Copy `rustc-fake` binary when building the `rustc-perf` tool rust-lang@9e0b76201b Add `RustcPerf` bootstrap tool rust-lang@9ec178df0b Add `cargo_args` to `ToolBuild` rust-lang@6a04dfe78c Rename `std::fs::try_exists` to `std::fs::exists` and stabilize fs_try_exists Co-authored-by: celinval <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Successful merges:
f16inline ASM support for 32-bit ARM #126555 (Addf16inline ASM support for 32-bit ARM)#[rustc_dump_{predicates,item_bounds}]#126686 (Add#[rustc_dump_{predicates,item_bounds}])...in multline code-skips in suggestions #126723 (Fix...in multline code-skips in suggestions)BootstrapCommand(step 1) #126731 (Bootstrap command refactoring: refactorBootstrapCommand(step 1))run-make/inline-always-many-cgutormake.rs#126823 (Migraterun-make/inline-always-many-cgutormake.rs)r? @ghost
@rustbot modify labels: rollup
Create a similar rollup