Some general cleanup, address clear conflict

CHANGELOG.md

@@ -19,6 +19,8 @@
 - **(breaking)** [#184](https://github.com/jamwaffles/ssd1306/pull/184) Increased MSRV to 1.61.0
 - **(breaking)** [#179](https://github.com/jamwaffles/ssd1306/pull/179) Changed `Ssd1306::reset` signature.
 - [#181](https://github.com/jamwaffles/ssd1306/pull/181) Update embedded-graphics-core dependency to 0.4
+- **(breaking)** [#185](https://github.com/jamwaffles/ssd1306/pull/185) The inherent `BufferedGraphicsMode::clear` has been renamed to `clear_buffer`.
+- [#185](https://github.com/jamwaffles/ssd1306/pull/185) Some methods no longer require `DI: WriteOnlyDataCommand`.
 
 ## [0.7.1] - 2022-08-15
 

src/command.rs

@@ -8,7 +8,6 @@ use display_interface::{DataFormat::U8, DisplayError, WriteOnlyDataCommand};
 
 /// Commands
 #[derive(Debug, Copy, Clone)]
-#[allow(dead_code)]
 pub enum Command {
     /// Set contrast. Higher number is higher contrast. Default = 0x7F
     Contrast(u8),

src/lib.rs

@@ -126,7 +126,6 @@ use crate::mode::BasicMode;
 use brightness::Brightness;
 use command::{AddrMode, Command, VcomhLevel};
 use display_interface::{DataFormat::U8, DisplayError, WriteOnlyDataCommand};
-use display_interface_spi::{SPIInterface, SPIInterfaceNoCS};
 use embedded_hal::{blocking::delay::DelayMs, digital::v2::OutputPin};
 use error::Error;
 use mode::{BufferedGraphicsMode, TerminalMode};
@@ -412,7 +411,7 @@ where
 }
 
 // SPI-only reset
-impl<SPI, DC, SIZE, MODE> Ssd1306<SPIInterfaceNoCS<SPI, DC>, SIZE, MODE> {
+impl<DI, SIZE, MODE> Ssd1306<DI, SIZE, MODE> {
     /// Reset the display.
     pub fn reset<RST, DELAY>(
         &mut self,
@@ -423,34 +422,18 @@ impl<SPI, DC, SIZE, MODE> Ssd1306<SPIInterfaceNoCS<SPI, DC>, SIZE, MODE> {
         RST: OutputPin,
         DELAY: DelayMs<u8>,
     {
-        inner_reset(rst, delay).map_err(Error::Pin)
-    }
-}
+        fn inner_reset<RST, DELAY>(rst: &mut RST, delay: &mut DELAY) -> Result<(), RST::Error>
+        where
+            RST: OutputPin,
+            DELAY: DelayMs<u8>,
+        {
+            rst.set_high()?;
+            delay.delay_ms(1);
+            rst.set_low()?;
+            delay.delay_ms(10);
+            rst.set_high()
+        }
 
-// SPI-only reset
-impl<SPI, DC, CS, SIZE, MODE> Ssd1306<SPIInterface<SPI, DC, CS>, SIZE, MODE> {
-    /// Reset the display.
-    pub fn reset<RST, DELAY>(
-        &mut self,
-        rst: &mut RST,
-        delay: &mut DELAY,
-    ) -> Result<(), Error<Infallible, RST::Error>>
-    where
-        RST: OutputPin,
-        DELAY: DelayMs<u8>,
-    {
         inner_reset(rst, delay).map_err(Error::Pin)
     }
 }
-
-fn inner_reset<RST, DELAY>(rst: &mut RST, delay: &mut DELAY) -> Result<(), RST::Error>
-where
-    RST: OutputPin,
-    DELAY: DelayMs<u8>,
-{
-    rst.set_high()?;
-    delay.delay_ms(1);
-    rst.set_low()?;
-    delay.delay_ms(10);
-    rst.set_high()
-}

src/mode/buffered_graphics.rs

@@ -58,7 +58,7 @@ where
 
     /// Initialise and clear the display in graphics mode.
     fn init(&mut self) -> Result<(), DisplayError> {
-        self.clear();
+        self.clear_impl(false);
         self.init_with_addr_mode(AddrMode::Horizontal)
     }
 }
@@ -68,11 +68,8 @@ where
     DI: WriteOnlyDataCommand,
     SIZE: DisplaySize,
 {
-    /// Clear the display buffer. You need to call `disp.flush()` for any effect on the screen
-    pub fn clear(&mut self) {
-        for b in self.mode.buffer.as_mut() {
-            *b = 0;
-        }
+    fn clear_impl(&mut self, value: bool) {
+        self.mode.buffer.as_mut().fill(value as u8);
 
         let (width, height) = self.dimensions();
         self.mode.min_x = 0;
@@ -81,6 +78,11 @@ where
         self.mode.max_y = height - 1;
     }
 
+    /// Clear the underlying framebuffer. You need to call `disp.flush()` for any effect on the screen.
+    pub fn clear_buffer(&mut self) {
+        self.clear_impl(false);
+    }
+
     /// Write out data to a display.
     ///
     /// This only updates the parts of the display that have changed since the last flush.
@@ -225,6 +227,11 @@ where
 
         Ok(())
     }
+
+    fn clear(&mut self, color: Self::Color) -> Result<(), Self::Error> {
+        self.clear_impl(color.is_on());
+        Ok(())
+    }
 }
 
 #[cfg(feature = "graphics")]