checksum: introduce PrintImpl object to print impl Checksum blocks

For the most part, BCH codes used in the ecosystem are defined as
generator polynomials over GF32 and a target residue polynomial,
and the remaining code parameters are not specified, or are only
specified indirectly.

It is difficult for non-experts to compute or even validate parameters
such as the length of the code or the shifted+packed generator
polynomials. It will be even more difficult in the sequel when we extend
the Checksum trait to also cover error-correction parameters (some of
which will depend on our particular choice of representation for GF1024
elements, which is not canonical and differs between different
documents).

So we introduce an object `PrintImpl` and a unit test and doctest
demonstrating its use, which will generate all of the needed parameters
and output a block of Rust code.

api/all-features.txt

@@ -398,6 +398,13 @@ impl core::panic::unwind_safe::UnwindSafe for bech32::segwit::DecodeError
 impl core::panic::unwind_safe::UnwindSafe for bech32::segwit::EncodeError
 impl<'a, I, Ck> core::iter::traits::iterator::Iterator for bech32::primitives::encode::ByteIter<'a, I, Ck> where I: core::iter::traits::iterator::Iterator<Item = bech32::primitives::gf32::Fe32>, Ck: bech32::primitives::checksum::Checksum
 impl<'a, I, Ck> core::iter::traits::iterator::Iterator for bech32::primitives::encode::CharIter<'a, I, Ck> where I: core::iter::traits::iterator::Iterator<Item = bech32::primitives::gf32::Fe32>, Ck: bech32::primitives::checksum::Checksum
+impl<'a, T: bech32::primitives::checksum::Checksum> bech32::primitives::checksum::PrintImpl<'a, T>
+impl<'a, T: bech32::primitives::checksum::Checksum> core::fmt::Display for bech32::primitives::checksum::PrintImpl<'a, T>
+impl<'a, T> core::marker::Send for bech32::primitives::checksum::PrintImpl<'a, T> where T: core::marker::Send
+impl<'a, T> core::marker::Sync for bech32::primitives::checksum::PrintImpl<'a, T> where T: core::marker::Sync
+impl<'a, T> core::marker::Unpin for bech32::primitives::checksum::PrintImpl<'a, T> where T: core::marker::Unpin
+impl<'a, T> core::panic::unwind_safe::RefUnwindSafe for bech32::primitives::checksum::PrintImpl<'a, T> where T: core::panic::unwind_safe::RefUnwindSafe
+impl<'a, T> core::panic::unwind_safe::UnwindSafe for bech32::primitives::checksum::PrintImpl<'a, T> where T: core::panic::unwind_safe::UnwindSafe
 impl<'b> core::iter::traits::double_ended::DoubleEndedIterator for bech32::primitives::hrp::ByteIter<'b>
 impl<'b> core::iter::traits::double_ended::DoubleEndedIterator for bech32::primitives::hrp::CharIter<'b>
 impl<'b> core::iter::traits::double_ended::DoubleEndedIterator for bech32::primitives::hrp::LowercaseByteIter<'b>
@@ -820,6 +827,8 @@ pub fn bech32::primitives::checksum::PackedNull::fmt(&self, f: &mut core::fmt::F
 pub fn bech32::primitives::checksum::PackedNull::mul_by_x_then_add(&mut self, usize, u8) -> u8
 pub fn bech32::primitives::checksum::PackedNull::pack<I: core::iter::traits::iterator::Iterator<Item = u8>>(iter: I) -> Self
 pub fn bech32::primitives::checksum::PackedNull::unpack(&self, usize) -> u8
+pub fn bech32::primitives::checksum::PrintImpl<'a, T>::fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result
+pub fn bech32::primitives::checksum::PrintImpl<'a, T>::new(generator: &'a [bech32::primitives::gf32::Fe32], target: &'a [bech32::primitives::gf32::Fe32]) -> Self
 pub fn bech32::primitives::decode::AsciiToFe32Iter<'s>::len(&self) -> usize
 pub fn bech32::primitives::decode::AsciiToFe32Iter<'s>::next(&mut self) -> core::option::Option<bech32::primitives::gf32::Fe32>
 pub fn bech32::primitives::decode::AsciiToFe32Iter<'s>::size_hint(&self) -> (usize, core::option::Option<usize>)
@@ -1110,10 +1119,12 @@ pub mod bech32::primitives::iter
 pub mod bech32::primitives::segwit
 pub mod bech32::segwit
 pub struct bech32::Hrp
+pub struct bech32::PrintImpl<'a, T>
 pub struct bech32::hrp::Hrp
 pub struct bech32::primitives::checksum::Engine<Ck: bech32::primitives::checksum::Checksum>
 pub struct bech32::primitives::checksum::HrpFe32Iter<'hrp>
 pub struct bech32::primitives::checksum::PackedNull
+pub struct bech32::primitives::checksum::PrintImpl<'a, T>
 pub struct bech32::primitives::decode::AsciiToFe32Iter<'s>
 pub struct bech32::primitives::decode::ByteIter<'s>
 pub struct bech32::primitives::decode::CheckedHrpstring<'s>

api/alloc-only.txt

@@ -370,6 +370,13 @@ impl core::panic::unwind_safe::UnwindSafe for bech32::segwit::DecodeError
 impl core::panic::unwind_safe::UnwindSafe for bech32::segwit::EncodeError
 impl<'a, I, Ck> core::iter::traits::iterator::Iterator for bech32::primitives::encode::ByteIter<'a, I, Ck> where I: core::iter::traits::iterator::Iterator<Item = bech32::primitives::gf32::Fe32>, Ck: bech32::primitives::checksum::Checksum
 impl<'a, I, Ck> core::iter::traits::iterator::Iterator for bech32::primitives::encode::CharIter<'a, I, Ck> where I: core::iter::traits::iterator::Iterator<Item = bech32::primitives::gf32::Fe32>, Ck: bech32::primitives::checksum::Checksum
+impl<'a, T: bech32::primitives::checksum::Checksum> bech32::primitives::checksum::PrintImpl<'a, T>
+impl<'a, T: bech32::primitives::checksum::Checksum> core::fmt::Display for bech32::primitives::checksum::PrintImpl<'a, T>
+impl<'a, T> core::marker::Send for bech32::primitives::checksum::PrintImpl<'a, T> where T: core::marker::Send
+impl<'a, T> core::marker::Sync for bech32::primitives::checksum::PrintImpl<'a, T> where T: core::marker::Sync
+impl<'a, T> core::marker::Unpin for bech32::primitives::checksum::PrintImpl<'a, T> where T: core::marker::Unpin
+impl<'a, T> core::panic::unwind_safe::RefUnwindSafe for bech32::primitives::checksum::PrintImpl<'a, T> where T: core::panic::unwind_safe::RefUnwindSafe
+impl<'a, T> core::panic::unwind_safe::UnwindSafe for bech32::primitives::checksum::PrintImpl<'a, T> where T: core::panic::unwind_safe::UnwindSafe
 impl<'b> core::iter::traits::double_ended::DoubleEndedIterator for bech32::primitives::hrp::ByteIter<'b>
 impl<'b> core::iter::traits::double_ended::DoubleEndedIterator for bech32::primitives::hrp::CharIter<'b>
 impl<'b> core::iter::traits::double_ended::DoubleEndedIterator for bech32::primitives::hrp::LowercaseByteIter<'b>
@@ -781,6 +788,8 @@ pub fn bech32::primitives::checksum::PackedNull::fmt(&self, f: &mut core::fmt::F
 pub fn bech32::primitives::checksum::PackedNull::mul_by_x_then_add(&mut self, usize, u8) -> u8
 pub fn bech32::primitives::checksum::PackedNull::pack<I: core::iter::traits::iterator::Iterator<Item = u8>>(iter: I) -> Self
 pub fn bech32::primitives::checksum::PackedNull::unpack(&self, usize) -> u8
+pub fn bech32::primitives::checksum::PrintImpl<'a, T>::fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result
+pub fn bech32::primitives::checksum::PrintImpl<'a, T>::new(generator: &'a [bech32::primitives::gf32::Fe32], target: &'a [bech32::primitives::gf32::Fe32]) -> Self
 pub fn bech32::primitives::decode::AsciiToFe32Iter<'s>::len(&self) -> usize
 pub fn bech32::primitives::decode::AsciiToFe32Iter<'s>::next(&mut self) -> core::option::Option<bech32::primitives::gf32::Fe32>
 pub fn bech32::primitives::decode::AsciiToFe32Iter<'s>::size_hint(&self) -> (usize, core::option::Option<usize>)
@@ -1053,10 +1062,12 @@ pub mod bech32::primitives::iter
 pub mod bech32::primitives::segwit
 pub mod bech32::segwit
 pub struct bech32::Hrp
+pub struct bech32::PrintImpl<'a, T>
 pub struct bech32::hrp::Hrp
 pub struct bech32::primitives::checksum::Engine<Ck: bech32::primitives::checksum::Checksum>
 pub struct bech32::primitives::checksum::HrpFe32Iter<'hrp>
 pub struct bech32::primitives::checksum::PackedNull
+pub struct bech32::primitives::checksum::PrintImpl<'a, T>
 pub struct bech32::primitives::decode::AsciiToFe32Iter<'s>
 pub struct bech32::primitives::decode::ByteIter<'s>
 pub struct bech32::primitives::decode::CheckedHrpstring<'s>

src/lib.rs

@@ -166,6 +166,8 @@ pub use {
     crate::primitives::iter::{ByteIterExt, Fe32IterExt},
     crate::primitives::{Bech32, Bech32m, NoChecksum},
 };
+#[cfg(feature = "alloc")]
+pub use crate::primitives::checksum::PrintImpl;
 
 // Write to fmt buffer, small during testing to exercise full code path.
 #[cfg(not(test))]

src/primitives/checksum.rs

@@ -4,10 +4,20 @@
 //!
 //! [BCH]: <https://en.wikipedia.org/wiki/BCH_code>
 
+#[cfg(all(feature = "alloc", not(feature = "std"), not(test)))]
+use alloc::vec::Vec;
+#[cfg(feature = "alloc")]
+use core::fmt;
+#[cfg(feature = "alloc")]
+use core::marker::PhantomData;
 use core::{mem, ops};
 
-use crate::primitives::gf32::Fe32;
+#[cfg(feature = "alloc")]
+use super::{Field, Polynomial};
 use crate::primitives::hrp::Hrp;
+#[cfg(feature = "alloc")]
+use crate::Fe1024;
+use crate::Fe32;
 
 /// Trait defining a particular checksum.
 ///
@@ -49,7 +59,7 @@ pub trait Checksum {
     ///
     /// These cannot be usefully pre-computed because of Rust's limited constfn support
     /// as of 1.67, so they must be specified manually for each checksum. To check the
-    /// values for consistency, run `Self::sanity_check()`.
+    /// values for consistency, run [`Self::sanity_check`].
     const GENERATOR_SH: [Self::MidstateRepr; 5];
 
     /// The residue, modulo the generator polynomial, that a valid codeword will have.
@@ -83,6 +93,144 @@ pub trait Checksum {
     }
 }
 
+/// Given a polynomial representation for your generator polynomial and your
+/// target residue, outputs a `impl Checksum` block.
+///
+/// Used like
+///
+/// ```
+/// # #[cfg(feature = "alloc")] {
+/// use bech32::{Bech32, Fe32, PrintImpl};
+/// println!(
+///     "{}",
+///     PrintImpl::<Bech32>::new(
+///         &[Fe32::A, Fe32::K, Fe32::_5, Fe32::_4, Fe32::A, Fe32::J],
+///         &[Fe32::Q, Fe32::Q, Fe32::Q, Fe32::Q, Fe32::Q, Fe32::P],
+///     ),
+/// );
+/// # }
+/// ```
+///
+/// The awkward API is to allow this type to be used in the widest set of
+/// circumstances, including in nostd settings. (However, the underlying
+/// polynomial math requires the `alloc` feature.)
+///
+/// Both polynomial representations should be in little-endian order, so that
+/// the coefficient of x^i appears in the ith slot. The generator polynomial
+/// should be a monic polynomial but you should not include the monic term,
+/// so that both `generator` and `target` are arrays of the same length.
+///
+/// **This function should never need to be called by users, but will be helpful
+/// for developers.**
+///
+/// In general, when defining a checksum, it is best to call this method (and
+/// to add a unit test that calls [`Checksum::sanity_check`] rather than trying
+/// to compute the values yourself. The reason is that the specific values
+/// used depend on the representation of extension fields, which may differ
+/// between implementations (and between specifications) of your BCH code.
+#[cfg(feature = "alloc")]
+pub struct PrintImpl<'a, T> {
+    generator: &'a [Fe32],
+    target: &'a [Fe32],
+    bit_len: usize,
+    hex_width: usize,
+    midstate_repr: &'static str,
+    phantom: PhantomData<T>,
+}
+
+#[cfg(feature = "alloc")]
+impl<'a, T: Checksum> PrintImpl<'a, T> {
+    /// Constructor for an object to print an impl-block for the [`Checksum`] trait.
+    ///
+    /// # Panics
+    ///
+    /// Panics if any of the input values fail various sanity checks.
+    pub fn new(generator: &'a [Fe32], target: &'a [Fe32]) -> Self {
+        // Sanity checks.
+        assert_ne!(
+            generator.len(),
+            0,
+            "generator polynomial cannot be the empty string (constant 1)"
+        );
+        assert_ne!(target.len(), 0, "target residue cannot be the empty string");
+        if generator.len() != target.len() {
+            let hint = if generator.len() == target.len() + 1 {
+                " (you should not include the monic term of the generator polynomial"
+            } else if generator.len() > target.len() {
+                " (you may need to zero-pad your target residue)"
+            } else {
+                ""
+            };
+            panic!(
+                "Generator length {} does not match target residue length {}{}",
+                generator.len(),
+                target.len(),
+                hint
+            );
+        }
+
+        let bit_len = 5 * target.len();
+        let (hex_width, midstate_repr) = if bit_len <= 32 {
+            (8, "u32")
+        } else if bit_len <= 64 {
+            (16, "u64")
+        } else if bit_len <= 128 {
+            (32, "u128")
+        } else {
+            panic!("Generator length {} cannot exceed 25, as we cannot represent it by packing bits into a Rust numeric type", generator.len());
+        };
+        // End sanity checks.
+        PrintImpl { generator, target, bit_len, hex_width, midstate_repr, phantom: PhantomData }
+    }
+}
+
+#[cfg(feature = "alloc")]
+impl<'a, T: Checksum> fmt::Display for PrintImpl<'a, T> {
+    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
+        // Generator polynomial as a polynomial over GF1024
+        let gen_poly = {
+            let mut v = Vec::with_capacity(self.generator.len() + 1);
+            v.push(Fe1024::ONE);
+            v.extend(self.generator.iter().cloned().map(Fe1024::from));
+            Polynomial::new(v)
+        };
+        let (_gen, length, _exponents) = gen_poly.bch_generator_primitive_element();
+
+        write!(f, "// Code block generated by Checksum::print_impl polynomial ")?;
+        for fe in self.generator {
+            write!(f, "{}", fe)?;
+        }
+        write!(f, " target ")?;
+        for fe in self.target {
+            write!(f, "{}", fe)?;
+        }
+        f.write_str("")?;
+        writeln!(f, "impl Checksum for {} {{", core::any::type_name::<T>())?;
+        writeln!(
+            f,
+            "    type MidstateRepr = {}; // checksum packs into {} bits",
+            self.midstate_repr, self.bit_len
+        )?;
+        writeln!(f, "    const CODE_LENGTH: usize = {};", length)?;
+        writeln!(f, "    const CHECKSUM_LENGTH: usize = {};", gen_poly.degree())?;
+        writeln!(f, "    const GENERATOR_SH: [{}; 5] = [", self.midstate_repr)?;
+        let mut gen5 = self.generator.to_vec();
+        for _ in 0..5 {
+            let gen_packed = u128::pack(gen5.iter().copied().map(From::from));
+            writeln!(f, "        0x{:0width$x},", gen_packed, width = self.hex_width)?;
+            gen5.iter_mut().for_each(|x| *x *= Fe32::Z);
+        }
+        writeln!(f, "    ];")?;
+        writeln!(
+            f,
+            "    const TARGET_RESIDUE: {} = {:?};",
+            self.midstate_repr,
+            u128::pack(self.target.iter().copied().map(From::from))
+        )?;
+        f.write_str("}")
+    }
+}
+
 /// A checksum engine, which can be used to compute or verify a checksum.
 ///
 /// Use this to verify a checksum, feed it the data to be checksummed using
@@ -311,7 +459,12 @@ impl<'hrp> Iterator for HrpFe32Iter<'hrp> {
 
 #[cfg(test)]
 mod tests {
+    #[cfg(feature = "alloc")]
+    use core::convert::TryFrom;
+
     use super::*;
+    #[cfg(feature = "alloc")]
+    use crate::Bech32;
 
     #[test]
     fn pack_unpack() {
@@ -327,4 +480,41 @@ mod tests {
         assert_eq!(packed.unpack(2), 2);
         assert_eq!(packed.unpack(3), 1);
     }
+
+    #[test]
+    #[cfg(feature = "alloc")]
+    fn bech32() {
+        // In codes that Pieter specifies typically the generator polynomial is
+        // only given indirectly, in the reference code which encodes it in a
+        // packed form (shifted multiple times).
+        //
+        // For example in the BIP173 Python reference code you will see an array
+        // called `generator` whose first entry is 0x3b6a57b2. This first entry
+        // is the generator polynomial in packed form.
+        //
+        // To get the expanded polynomial form you can use `u128::unpack` like so:
+        let unpacked_poly = (0..6)
+            .rev() // Note .rev() to convert from BE integer literal to LE polynomial!
+            .map(|i| 0x3b6a57b2u128.unpack(i))
+            .map(|u| Fe32::try_from(u).unwrap())
+            .collect::<Vec<_>>();
+        assert_eq!(unpacked_poly, [Fe32::A, Fe32::K, Fe32::_5, Fe32::_4, Fe32::A, Fe32::J],);
+        // To get a version of the above with bech32 chars instead of Fe32s, which
+        // can be a bit hard to print, just stick a `.map(Fe32::to_char)` into the
+        // above iterator chain.
+
+        // Ok, exposition over. The actual unit test follows.
+
+        // Run with -- --nocapture to see the output of this. This unit test
+        // does not check the exact output because it is not deterministic,
+        // and cannot check the code semantics because Rust does not have
+        // any sort of `eval`, but you can manually check the output works.
+        let _s = PrintImpl::<Bech32>::new(
+            &[Fe32::A, Fe32::K, Fe32::_5, Fe32::_4, Fe32::A, Fe32::J],
+            &[Fe32::Q, Fe32::Q, Fe32::Q, Fe32::Q, Fe32::Q, Fe32::P],
+        )
+        .to_string();
+        #[cfg(feature = "std")]
+        println!("{}", _s);
+    }
 }