It is:
- JSON-formatted data for Zabbix LLD
- arcconf output parser for Zabbix
- Zabbix template
Demo screenshot:
Tested on:
- arcconf Version 2.02 (B22404)
- Ubuntu 16.04.1 LTS
- Adaptec 3405 controller
- Zabbix Server 2.4
- 1 controller only (ID 1)
- up to 10 logical devices only (ID 0-9)
- up to 10 physical drives only (ID 0-9)
- parameters values reads and being stored as raw string, not numbers (e.q. "33 C/ 91 F (Normal)")
Script use a arcconf utility by Adaptec from https://hwraid.le-vert.net/.
wget -O - https://hwraid.le-vert.net/debian/hwraid.le-vert.net.gpg.key | sudo apt-key add -
echo "deb http://hwraid.le-vert.net/debian jessie main" | sudo tee /etc/apt/sources.list.d/hwraid.list
apt update
apt install arcconf
Assuming arrconf is installed to /usr/sbin/arcconf.
whereis arcconf:
arcconf: /usr/sbin/arcconf
If not — consider to change path to the earcconf executable in the script.
Assuming current user is in the sudo group.
sudo mkdir /opt/zabbix_scripts
sudo chown zabbix:sudo /opt/zabbix_scripts
sudo chmod 775 /opt/zabbix_scripts
cd /opt/zabbix_scripts
git clone [email protected]:YSmetana/raid_arcconf_zabbix_lld.git
sudo chown -R zabbix:sudo raid_arcconf_zabbix_lld
sudo chmod 775 raid_arcconf_zabbix_lld
cd raid_arcconf_zabbix_lld
sudo chmod 774 *.py
arcconf need sudo.
sudo chown root:root raid_arcconf_zabbix_lld_sudo
sudo chmod 440 raid_arcconf_zabbix_lld_sudo
sudo ln -s /opt/zabbix_scripts/raid_arcconf_zabbix_lld/raid_arcconf_zabbix_lld_sudo /etc/sudoers.d/
sudo sudo -k
sudo ln -s /opt/zabbix_scripts/raid_arcconf_zabbix_lld/raid_arcconf_zabbix_lld.conf /etc/zabbix/zabbix_agentd.conf.d/
sudo service zabbix-agent restart
sudo -u zabbix bash
zabbix_agentd -t "raid.arcconf[ad,-1,lld]"
raid.arcconf[ad,all,lld] [t|{"data": [{"{#OBJ_ALIAS}": "Adaptec 3405", "{#OBJ_TYPE}": "ad", "{#OBJ_ID}": 1}]}]
zabbix_agentd -t "raid.arcconf[ld,1,Status of Logical Device]"
raid.arcconf[ld,1,Status of Logical Device] [t|Optimal]
Import template raid_arcconf_zabbix_lld.xml into Zabbix: "Configuration -> Templates -> Import.". You shuld see template named Service_Adaptec_Raid.
Add host to the Template, or link template to the Host.
Short help: raid_arcconf_zabbix_lld.py --help.
Logical (virtual) drives LLD:
raid_arcconf_zabbix_lld.py --verbose ld -1 lld:
{"data": [{"OBJ_TYPE": "ld", "OBJ_ALIAS": "zeta-r1-3t", "OBJ_ID": 0}, {"OBJ_TYPE": "ld", "OBJ_ALIAS": "zeta-v-s03", "OBJ_ID": 1}]}
To get a desired value you can use any "key" available in arcconf output (see "arcconf output example" below).
raid_arcconf_zabbix_lld.py ld 1 "Status of Logical Device"
Optimal
arcconf GETCONFIG 1 AD:
Controllers found: 1
----------------------------------------------------------------------
Controller information
----------------------------------------------------------------------
Controller Status : Optimal
Channel description : SAS/SATA
Controller Model : Adaptec 3405
Controller Serial Number : 8C16103DF1D
Controller World Wide Name : 50000D11009C9400
Controller Alarm : Enabled
Physical Slot : 3
Temperature : 35 C/ 95 F (Normal)
Installed memory : 128 MB
Global task priority : High
Host bus type : unknown
Host bus speed : 0 MHz
Host bus link width : 0 bit(s)/link(s)
PCI Device ID : 645
Stayawake period : Disabled
Spinup limit internal drives : 0
Spinup limit external drives : 0
Defunct disk drive count : 1
Logical devices/Failed/Degraded : 2/0/1
NCQ status : Enabled
--------------------------------------------------------
RAID Properties
--------------------------------------------------------
Copyback : Disabled
Automatic Failover : Enabled
Background consistency check : Disabled
Background consistency check period : 30
--------------------------------------------------------
Controller Version Information
--------------------------------------------------------
BIOS : 5.2-0 (17342)
Firmware : 5.2-0 (17342)
Driver : 1.2-1 (41010)
Boot Flash : 5.2-0 (17342)
--------------------------------------------------------
Controller Battery Information
--------------------------------------------------------
Status : Optimal
Over temperature : No
Capacity remaining : 100 percent
Time remaining (at current draw) : 3 days, 1 hours, 52 minutes
arcconf GETCONFIG 1 LD 0
Controllers found: 1
----------------------------------------------------------------------
Logical device information
----------------------------------------------------------------------
Logical Device number 0
Logical Device name : zeta-r1-3t
Block Size of member drives : 512 Bytes
RAID level : 1
Unique Identifier : B715F832
Status of Logical Device : Degraded
Additional details : Initialized with Build/Clear
Size : 2856950 MB
Parity space : 2856960 MB
Interface Type : SAS/SATA
Device Type : HDD
Read-cache setting : Enabled
Read-cache status : On
Write-cache setting : On when protected by battery/ZMM
Write-cache status : On
Partitioned : Yes
Protected by Hot-Spare : No
Bootable : Yes
Failed stripes : No
Power settings : Disabled
--------------------------------------------------------
Logical Device segment information
--------------------------------------------------------
Segment 0 : Present (2861588MB, SATA, HDD, Channel:0, Device:10) WD-WCC4N0RUUPKF
Segment 1 : Missing
arcconf GETCONFIG 1 PD
Controllers found: 1
----------------------------------------------------------------------
Physical Device information
----------------------------------------------------------------------
Device #0
Device is a Hard drive
State : Online
Block Size : 512 Bytes
Supported : Yes
Transfer Speed : SATA 3.0 Gb/s
Reported Channel,Device(T:L) : 0,10(10:0)
Vendor : WDC
Model : WD30EFRX-68EUZN0
Firmware : 82.00A82
Serial number : WD-WCC4N0RUUPKF
Reserved Size : 4739480 KB
Used Size : 2856960 MB
Unused Size : 64 KB
Total Size : 2861588 MB
Write Cache : Enabled (write-back)
FRU : None
S.M.A.R.T. : No
S.M.A.R.T. warnings : 0
SSD : No
Temperature : Not Supported
NCQ status : Enabled
----------------------------------------------------------------
Device Phy Information
----------------------------------------------------------------
Phy #0
PHY Identifier : 0
SAS Address : 5001517507FE6003
Attached PHY Identifier : 2
Attached SAS Address : 5001517507FE6000
Device #1
Device is a Hard drive
State : Online
Block Size : 512 Bytes
Supported : Yes
Transfer Speed : SATA 3.0 Gb/s
Reported Channel,Device(T:L) : 0,11(11:0)
Vendor : HUA72201
Model : 0CLA330
Firmware : JP4OA3NB
Serial number : JPW9P0N0139JZD
Reserved Size : 538264 KB
Used Size : 953344 MB
Unused Size : 64 KB
Total Size : 953869 MB
Write Cache : Enabled (write-back)
FRU : None
S.M.A.R.T. : No
S.M.A.R.T. warnings : 0
SSD : No
Temperature : Not Supported
NCQ status : Enabled
----------------------------------------------------------------
Device Phy Information
----------------------------------------------------------------
Phy #0
PHY Identifier : 0
SAS Address : 5001517507FE6004
Attached PHY Identifier : 3
Attached SAS Address : 5001517507FE6000
Device #2
Device is a Hard drive
State : Failed
Block Size : Unknown
Supported : Yes
Reported Channel,Device(T:L) : 0,13(13:0)
Vendor :
Model :
Firmware :
World-wide name : 0000000000000000
Total Size : 0 MB
Write Cache : Unknown
FRU : None
S.M.A.R.T. : No
S.M.A.R.T. warnings : 0
SSD : No
Temperature : Not Supported
----------------------------------------------------------------
Device Phy Information
----------------------------------------------------------------
No Phy information available
Device #3
Device is an Enclosure Services Device
Reported Channel,Device(T:L) : 2,0(0:0)
Type : SAF-TE
Vendor : ESG-SHV.
Model : SCA HSBP M13....
Firmware : 2.05