ONVIF not working on SmartPSS

[TheAlchemist92]

Hi
I Wanted to add my Yi camera on SmartPSS (I have a camera recorder linked to my camera security system) But when I try to add the camera with IP and port (I tried with the default port 80 and with port 3777) the response is: "can not find network host"
Any idea?

[roleoroleo]

Port is TCP 1000 80.

[TheAlchemist92]

And why in the settings the port used is 80? Il mer 5 apr 2023, 17:21 roleo ***@***.***> ha scritto:

…

Port is TCP 1000. — Reply to this email directly, view it on GitHub <#612 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AXPLA6POS5OA72JZ5GYOFHDW7WEYZANCNFSM6AAAAAAWTBYM7U> . You are receiving this because you authored the thread.Message ID: <roleoroleo/yi-hack-Allwinner-v2/repo-discussions/612/comments/5533856@ github.com>

[roleoroleo]

Sorry, TCP port is 80.
Wrong model...

Please check if the cam is properly configured using a standard client software like Onvif Device Manager.

[TheAlchemist92]

Onvif device menager find the camera. I tried to add the camera directly to my NVR and it finds the camera (green spot) but if I try to see the images it doesnt work... any setting to try to use? Il gio 6 apr 2023, 09:33 roleo ***@***.***> ha scritto:

…

Sorry, TCP port is 80. Wrong model... Please check if the cam is properly configured using a standard client software like Onvif Device Manager. — Reply to this email directly, view it on GitHub <#612 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AXPLA6OVIFMRD5F2LVNZ6QTW7ZWTJANCNFSM6AAAAAAWTBYM7U> . You are receiving this because you authored the thread.Message ID: <roleoroleo/yi-hack-Allwinner-v2/repo-discussions/612/comments/5540550@ github.com>

[roleoroleo]

No settings. ONVIF should magically works.
But it's a complicated standard and there are a lot of compatibility problem.
If you want to get to the bottom of the problem I need a wireshark capture between the NVR and the cam.
I could try to analyze it.

[TheAlchemist92]

How can i do this? Can we PM in some way? Il ven 7 apr 2023, 09:04 roleo ***@***.***> ha scritto:

…

No settings. ONVIF should magically works. But it's a complicated standard and there are a lot of compatibility problem. If you want to get to the bottom of the problem I need a wireshark capture between the NVR and the cam. I could try to analyze it. — Reply to this email directly, view it on GitHub <#612 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AXPLA6PHXDSHVQNJBCZLDK3W764BLANCNFSM6AAAAAAWTBYM7U> . You are receiving this because you authored the thread.Message ID: <roleoroleo/yi-hack-Allwinner-v2/repo-discussions/612/comments/5550919@ github.com>

[roleoroleo]

• Download tcpdump from here:
  https://github.com/roleoroleo/yi-hack-utils/tree/main/Allwinner-v2

• Copy it to the cam and run it with this command:
  tcpdump -i eth0 -w /tmp/sd/onvif.pcap

• Run the wizard on your NVR until you receive the error

• Stop tcpdump (CTRL-C)

• Share here the file /tmp/sd/onvif.pcap