Skip to content

Bump third_party/perfetto/repo from b9aca8f to bea7f2f #58

Bump third_party/perfetto/repo from b9aca8f to bea7f2f

Bump third_party/perfetto/repo from b9aca8f to bea7f2f #58

Workflow file for this run

# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
name: Build example - NXP
on:
push:
branches-ignore:
- 'dependabot/**'
pull_request:
merge_group:
concurrency:
group: ${{ github.ref }}-${{ github.workflow }}-${{ (github.event_name == 'pull_request' && github.event.number) || (github.event_name == 'workflow_dispatch' && github.run_number) || github.sha }}
cancel-in-progress: true
env:
CHIP_NO_LOG_TIMESTAMPS: true
jobs:
k32w0:
name: K32W0
env:
BUILD_TYPE: gn_k32w
runs-on: ubuntu-latest
if: github.actor != 'restyled-io[bot]'
container:
image: ghcr.io/project-chip/chip-build-k32w:74
volumes:
- "/tmp/bloat_reports:/tmp/bloat_reports"
steps:
- name: Checkout
uses: actions/checkout@v4
- name: Checkout submodules & Bootstrap
uses: ./.github/actions/checkout-submodules-and-bootstrap
with:
platform: nxp
- name: Set up environment for size reports
uses: ./.github/actions/setup-size-reports
if: ${{ !env.ACT }}
with:
gh-context: ${{ toJson(github) }}
- name: Build examples
run: |
scripts/run_in_build_env.sh "\
./scripts/build/build_examples.py \
--target nxp-k32w0-freertos-lighting \
--target nxp-k32w0-freertos-lighting-factory \
--target nxp-k32w0-freertos-lighting-rotating-id \
--target nxp-k32w0-freertos-contact-sensor \
--target nxp-k32w0-freertos-contact-sensor-low-power \
--target nxp-k32w0-freertos-contact-sensor-low-power-factory \
build \
--copy-artifacts-to out/artifacts \
"
- name: Get lighting app size stats
run: |
.environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \
nxp k32w0+release light \
out/artifacts/nxp-k32w0-freertos-lighting/chip-k32w0x-light-example.elf \
/tmp/bloat_reports/
- name: Get contact sensor size stats
run: |
.environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \
nxp k32w0+release contact \
out/artifacts/nxp-k32w0-freertos-contact-sensor-low-power/chip-k32w0x-contact-example.elf \
/tmp/bloat_reports/
- name: Uploading Size Reports
uses: ./.github/actions/upload-size-reports
if: ${{ !env.ACT }}
with:
platform-name: K32W0
k32w1:
name: K32W1
env:
BUILD_TYPE: gn_k32w
runs-on: ubuntu-latest
if: github.actor != 'restyled-io[bot]'
container:
image: ghcr.io/project-chip/chip-build-nxp:71
volumes:
- "/tmp/bloat_reports:/tmp/bloat_reports"
steps:
- name: Checkout
uses: actions/checkout@v4
- name: Checkout submodules & Bootstrap
uses: ./.github/actions/checkout-submodules-and-bootstrap
with:
platform: nxp
extra-submodule-parameters: --recursive
- name: Set up environment for size reports
uses: ./.github/actions/setup-size-reports
if: ${{ !env.ACT }}
with:
gh-context: ${{ toJson(github) }}
- name: Build examples
run: |
scripts/run_in_build_env.sh "\
./scripts/build/build_examples.py \
--target nxp-k32w1-freertos-lighting \
--target nxp-k32w1-freertos-contact-sensor-low-power \
build \
--copy-artifacts-to out/artifacts \
"
- name: Get lighting app size stats
run: |
.environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \
nxp k32w1+release light \
out/artifacts/nxp-k32w1-freertos-lighting/chip-k32w1-light-example.elf \
/tmp/bloat_reports/
- name: Get contact sensor size stats
run: |
.environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \
nxp k32w1+release contact \
out/artifacts/nxp-k32w1-freertos-contact-sensor-low-power/chip-k32w1-contact-example.elf \
/tmp/bloat_reports/
- name: Uploading Size Reports
uses: ./.github/actions/upload-size-reports
if: ${{ !env.ACT }}
with:
platform-name: K32W1
rw61x:
name: RW61X
env:
BUILD_TYPE: gn_rw61x
runs-on: ubuntu-latest
if: github.actor != 'restyled-io[bot]'
container:
image: ghcr.io/project-chip/chip-build-nxp:74
volumes:
- "/tmp/bloat_reports:/tmp/bloat_reports"
steps:
- name: Checkout
uses: actions/checkout@v4
- name: Checkout submodules & Bootstrap
uses: ./.github/actions/checkout-submodules-and-bootstrap
with:
platform: nxp
extra-submodule-parameters: --recursive
- name: Set up environment for size reports
uses: ./.github/actions/setup-size-reports
if: ${{ !env.ACT }}
with:
gh-context: ${{ toJson(github) }}
- name: Build RW61X all clusters example app
run: |
scripts/run_in_build_env.sh "\
./scripts/build/build_examples.py \
--target nxp-rw61x-freertos-all-clusters-wifi \
--target nxp-rw61x-freertos-all-clusters-thread \
--target nxp-rw61x-freertos-all-clusters-thread-wifi \
build \
--copy-artifacts-to out/artifacts \
"
- name: Build RW61X thermostat example app
run: |
scripts/run_in_build_env.sh "\
./scripts/build/build_examples.py \
--target nxp-rw61x-freertos-thermostat-wifi \
--target nxp-rw61x-freertos-thermostat-thread \
--target nxp-rw61x-freertos-thermostat-thread-wifi \
build \
--copy-artifacts-to out/artifacts \
"
- name: Build RW61X laundry-washer example app
run: |
scripts/run_in_build_env.sh "\
./scripts/build/build_examples.py \
--target nxp-rw61x-freertos-laundry-washer-wifi \
--target nxp-rw61x-freertos-laundry-washer-thread \
--target nxp-rw61x-freertos-laundry-washer-thread-wifi \
build \
--copy-artifacts-to out/artifacts \
"
- name: Uploading Size Reports
uses: ./.github/actions/upload-size-reports
if: ${{ !env.ACT }}
with:
platform-name: RW61X
zephyr:
name: ZEPHYR_RW61X
runs-on: ubuntu-latest
if: github.actor != 'restyled-io[bot]'
container:
image: ghcr.io/project-chip/chip-build-nxp-zephyr:74
steps:
- name: Checkout
uses: actions/checkout@v4
- name: Checkout submodules & Bootstrap
uses: ./.github/actions/checkout-submodules-and-bootstrap
with:
platform: nxp
- name: Build RW61x Zephyr examples
run: |
scripts/run_in_build_env.sh "\
./scripts/build/build_examples.py \
--target nxp-rw61x-zephyr-all-clusters \
--target nxp-rw61x-zephyr-thermostat \
--target nxp-rw61x-zephyr-laundry-washer-factory \
build \
"