subed is an Emacs major mode for editing subtitles while playing the corresponding media file with mpv. At the moment, the only supported formats are:
- SubRip (
.srt
) - WebVTT (
.vtt
) - Advanced SubStation Alpha (
.ass
, experimental ) - Tab-separated values (
.tsv
, experimental ) - as exported by Audacity for labels. TSVs are not recognized automatically because it’s a common data format, but you can usesubed-tsv-mode
to turn it on in a buffer.
- Jump to next (
M-n
) and previous (M-p
) subtitle text. - Jump to the beginning (
C-M-a
) and end (C-M-e
) of the current subtitle’s text. - Merge subtitles with
M-m
(subed-merge-dwim
) and split them withM-.
(subed-split-subtitle
). If the media file is playing in MPV, use the current playback position. If not, use the relative position in the subtitle text, or other functions listed insubed-split-subtitle-timestamp-functions
. - Insert subtitles evenly spaced throughout the available space (
M-i
) or right next to the current subtitle (C-M-i
). A prefix argument controls how many subtitles to insert and whether they are inserted before or after the current subtitle. - Kill subtitles (
M-k
). - Adjust subtitle start (
M-[
/M-]
) and stop (M-{
/M-}
) time. A prefix argument sets the number of milliseconds for the current session (e.g.C-u 1000 M-[ M-[ M-[
decreases start time by 3 seconds). - Move the current subtitle or all marked subtitles
(
subed-move-subtitles
) forward (C-M-n
) or backward (C-M-p
) in time without changing subtitle duration. A prefix argument sets the number of milliseconds for the current session (e.g.C-u 500 C-M-n C-M-n
moves the current subtitle 1 second forward). - Shift the current subtitle together with all following subtitles
using (
subed-shift-subtitles
), or shift them forward (C-M-f
) or backward (C-M-b
). This is basically a convenience shortcut forC-SPC M-> C-M-n/p
. This is handy for correcting sync delays where the subtitles are correctly spaced but are offset from the audio. - Scale all subtitles or all marked subtitles forward (
C-M-x
) or backward (C-M-S-x
) in time without changing subtitle duration. A prefix argument sets the number of milliseconds for the current session (e.g.C-u 500 C-M-x
moves the last [or last marked] subtitle forward 500ms and proportionally scales all [or all marked] subtitles based on this time extension. Similarly,C-u 500 C-M-S-x
moves the last [or last marked] subtitle backward 500ms and proportionally scales all [or all marked] subtitles based on this time contraction). This can be extremely useful to correct synchronization issues in existing subtitle files. First, adjust the starting time if necessary (e.g.C-M-f
), then adjust the ending and scale constituent subtitles (e.g.C-M-x
). - Show CPS (characters per second) for the current subtitle.
- Insert HTML-like tags (
C-c C-t C-t
, with an optional attribute when prefixed byC-u
), in particular italics (C-c C-t C-i
) or boldface (C-c C-t C-b
). - SRT: Sort and re-number subtitles and remove any extra spaces and
newlines (
M-s
). This is done automatically every time the buffer is saved. - Trim subtitle overlaps with
M-x subed-trim-overlaps
. By default, this adjusts the stop time of overlapping subtitles tosubed-subtitle-spacing
milliseconds before the next subtitle starts. UseM-x customize-group
subed
to configure trimming to happen automatically when buffers are loaded or saved, which time is adjusted, and how much time to leave between subtitles. - Convert between formats with
M-x subed-convert
. - Show the waveform (
M-x subed-waveform-minor-mode
, off by default) extracted from the media file usingffmpeg
with the start/stop positions of the current subtitle and the current position in MPV marked along with the subtitle. Change the “volume” of the waveform (i.e., the visible amplitude) withC-c C--
andC-c C-=
. Redisplay the waveform withC-c |
. Left/right-click on the waveform to set the start/stop timestamps. If you would like to display the waveform automatically when you open a file, you can add(add-hook 'subed-mode-hook 'subed-waveform-minor-mode)
to your configuration. - Load word timing data (ex: SRV2) using
M-x subed-word-data-load-from-file
. This will be used for splitting words at timestamps when available. - Use
M-x subed-align
and aeneas to align your text or subtitles with an audio file in order to get timestamps.
Using network sockets to control MPV works on Linux and on Mac OS X, but not on Microsoft Windows due to the lack of Unix-style sockets. On Microsoft Windows, you will not be able to synchronize with MPV.
- Automatically open the associated media file in MPV based on the filename, open a media file manually with
C-c C-v
(subed-mpv-play-from-file
), or play media directly from a URL withC-c C-u
(subed-mpv-play-from-url
) . You can customize the automatic detection of files by changingsubed-video-extensions
andsubed-audio-extensions
. - Pause and resume playback without leaving Emacs (
M-SPC
). - Jump to the current subtitle in the MPV player with
M-j
(subed-mpv-jump-to-current-subtitle
). Toggle looping over the current subtitle withC-c C-l
(subed-toggle-loop-over-current-subtitle
). Control how many seconds to loop before or after the current subtitles by customizingsubed-loop-seconds-before
andsubed-loop-seconds-after
. - Use
C-c .
(subed-toggle-sync-point-to-player
) to toggle whether the point should move to the currently playing subtitle. - Use
C-c ,
(subed-toggle-sync-player-to-point
) to toggle whether mpv should seek to the position of the current subtitle when the point moves between subtitles. - Subtitles are automatically reloaded in mpv when the buffer is saved.
- Copy the current playback position as start (
C-c [
) or stop (C-c ]
) time of the current subtitle. - Playback is paused or slowed down when a subtitle’s text is edited (
C-c C-p
,subed-toggle-pause-while-typing
). - Loop over the current subtitle in mpv (
C-c C-l
). - When a subtitle’s start or stop time changes, mpv seeks to the subtitle’s
start time (
C-c C-r
,subed-toggle-replay-adjusted-subtitle
). - Move one frame forward or backward (
C-c C-f .
andC-c C-f ,
; pressing,
or.
afterwards moves by frames until any other key is pressed).
subed
is now on NonGNU ELPA. On Emacs 28 and later, you can install it with M-x package-install
subed
.
To install it on Emacs 27 or earlier, add the following to your Emacs configuration file:
(with-eval-after-load 'package (add-to-list 'package-archives '("nongnu" . "https://elpa.nongnu.org/nongnu/")))
Use M-x eval-buffer
to run the code, use M-x package-refresh-contents
to load the package archives, and then use M-x package-install
subed
.
Sample configuration:
(with-eval-after-load 'subed-mode
;; Remember cursor position between sessions
(add-hook 'subed-mode-hook 'save-place-local-mode)
;; Break lines automatically while typing
(add-hook 'subed-mode-hook 'turn-on-auto-fill)
;; Break lines at 40 characters
(add-hook 'subed-mode-hook (lambda () (setq-local fill-column 40)))
;; Some reasonable defaults
(add-hook 'subed-mode-hook 'subed-enable-pause-while-typing)
;; As the player moves, update the point to show the current subtitle
(add-hook 'subed-mode-hook 'subed-enable-sync-point-to-player)
;; As your point moves in Emacs, update the player to start at the current subtitle
(add-hook 'subed-mode-hook 'subed-enable-sync-player-to-point)
;; Replay subtitles as you adjust their start or stop time with M-[, M-], M-{, or M-}
(add-hook 'subed-mode-hook 'subed-enable-replay-adjusted-subtitle)
;; Loop over subtitles
(add-hook 'subed-mode-hook 'subed-enable-loop-over-current-subtitle)
;; Show characters per second
(add-hook 'subed-mode-hook 'subed-enable-show-cps))
If that doesn’t work, you can install it manually. To install from the main branch:
git clone https://github.com/sachac/subed.git
This will create a subed
directory with the code.
If you have the make
utility, you can regenerate the autoload definitions with
make autoloads
If you don’t have make
installed, you can generate the autoloads
with:
emacs --quick --batch --eval "(progn (setq generated-autoload-file (expand-file-name \"subed-autoloads.el\" \"subed\") backup-inhibited t) \
(update-directory-autoloads \"./subed\"))"
Then you can add
the following to your Emacs configuration (typically
~/.config/emacs/init.el
, ~/.emacs.d/init.el
, or ~/.emacs
; you
can create this file if it doesn’t exist yet). Here’s a configuration example:
;; Note the reference to the subed subdirectory, instead of the one at the root of the checkout
(add-to-list 'load-path "/path/to/subed/subed")
(require 'subed-autoloads)
(with-eval-after-load 'subed-mode
;; Remember cursor position between sessions
(add-hook 'subed-mode-hook 'save-place-local-mode)
;; Break lines automatically while typing
(add-hook 'subed-mode-hook 'turn-on-auto-fill)
;; Break lines at 40 characters
(add-hook 'subed-mode-hook (lambda () (setq-local fill-column 40)))
;; Some reasonable defaults
(add-hook 'subed-mode-hook 'subed-enable-pause-while-typing)
;; As the player moves, update the point to show the current subtitle
(add-hook 'subed-mode-hook 'subed-enable-sync-point-to-player)
;; As your point moves in Emacs, update the player to start at the current subtitle
(add-hook 'subed-mode-hook 'subed-enable-sync-player-to-point)
;; Replay subtitles as you adjust their start or stop time with M-[, M-], M-{, or M-}
(add-hook 'subed-mode-hook 'subed-enable-replay-adjusted-subtitle)
;; Loop over subtitles
(add-hook 'subed-mode-hook 'subed-enable-loop-over-current-subtitle)
;; Show characters per second
(add-hook 'subed-mode-hook 'subed-enable-show-cps))
You can reload your configuration with M-x eval-buffer
or restart Emacs.
If you want to try a branch (ex: derived-mode
), you can use the
following command inside the subed
directory:
git checkout branchname
Here’s an example setup if you use use-package:
(use-package subed
:ensure t
:config
;; Remember cursor position between sessions
(add-hook 'subed-mode-hook 'save-place-local-mode)
;; Break lines automatically while typing
(add-hook 'subed-mode-hook 'turn-on-auto-fill)
;; Break lines at 40 characters
(add-hook 'subed-mode-hook (lambda () (setq-local fill-column 40)))
;; Some reasonable defaults
(add-hook 'subed-mode-hook 'subed-enable-pause-while-typing)
;; As the player moves, update the point to show the current subtitle
(add-hook 'subed-mode-hook 'subed-enable-sync-point-to-player)
;; As your point moves in Emacs, update the player to start at the current subtitle
(add-hook 'subed-mode-hook 'subed-enable-sync-player-to-point)
;; Replay subtitles as you adjust their start or stop time with M-[, M-], M-{, or M-}
(add-hook 'subed-mode-hook 'subed-enable-replay-adjusted-subtitle)
;; Loop over subtitles
(add-hook 'subed-mode-hook 'subed-enable-loop-over-current-subtitle)
;; Show characters per second
(add-hook 'subed-mode-hook 'subed-enable-show-cps)
)
If you use straight.el, you can install subed with the following recipe:
(straight-use-package '(subed :type git :host github :repo "sachac/subed" :files ("subed/*.el")))
C-h f subed-mode
should get you started. This is the parent mode for
subed-srt-mode
, subed-vtt-mode
, and subed-ass-mode
. When
manually loading a mode, use those specific format modes instead of
subed-mode
.
You may want to use set-fill-column
and
display-fill-column-indicator-mode
to show the target number of
characters.
Use subed-split-subtitle
(M-.
), subed-merge-dwim
(M-b
), and
subed-merge-with-previous
(M-M
) to split lines.
Splitting will use the current MPV position if available. If not, it
will guess where to split based on the the number of characters in the
subtitle. You can use subed-mpv-jump-to-current-subtitle
(M-j
) to play the
current subtitle manually and use subed-mpv-toggle-pause
(M-SPC
) to stop at
the right time. Use subed-toggle-loop-over-current-subtitle
(C-c C-l
) if you
want to keep looping. subed-waveform-show-current
can help you
fine-tune the split.
You can use subed-mpv-jump-to-current-subtitle
(M-j
) to play the
current subtitle manually. Use
subed-mpv-jump-to-current-subtitle-near-end
(M-J
) to jump to near
the end of the subtitle in order to test it. Use
subed-toggle-loop-over-current-subtitle
(C-c C-l
) if you want to
keep looping automatically. Use subed-mpv-toggle-pause
(M-SPC
) to stop at the
right time.
subed-waveform-show-current
or subed-waveform-show-all
can be
useful for adjusting start and end timestamps. Use
subed-waveform-set-start
(mouse-1
, which is left click) or subed-waveform-set-stop
(mouse-3
, which is right-click) to adjust only
the current subtitle’s timestamps, or use
subed-waveform-set-start-and-copy-to-previous
(S-mouse-1
or M-mouse-1
) or
subed-waveform-set-stop-and-copy-to-next
(S-mouse-3
or M-mouse-3
) to adjust adjacent
subtitles as well.
You can also manually adjust
- subtitle start:
M-[
/M-]
- subtitle stop: (
M-{
/M-}
)
A prefix argument sets the number of milliseconds (e.g. C-u 1000 M-[ M-[ M-[
decreases start time by 3 seconds).
You can use subed-mpv-jump-to-current-subtitle
(M-j
) to play the current
subtitle and use subed-mpv-toggle-pause
(M-SPC
) to stop at the right time.
Use subed-toggle-loop-over-current-subtitle
(C-c C-l
) if you want to keep
looping automatically.
If you have wdiff installed, you can use
subed-wdiff-subtitle-text-with-file
to compare the subtitle text
with a script or another subtitle file.
One way is to start with one big subtitle that covers the whole media
file, and then split it using subed-split-subtitle
(M-.
).
Another way is to type as much of the text as you can without worrying
about timestamps, putting each caption on a separate line. Then you
can use subed-align
to convert it into timestamped captions.
If you’re using subed-waveform-show-current
or subed-waveform-show-all
, you can use M-mouse-2
(Meta-middle-click, subed-waveform-shift-subtitles
) to shift the current subtitle and succeeding subtitles so that they start at the position you clicked on.
To do this with the keyboard, you can use
subed-shift-subtitles-to-start-at-timestamp
if you want to specify a
timestamp or subed-shift-subtitles
to specify a millisecond offset.
You can use subed-copy-region-text
to copy the text of the subtitles
for pasting into another buffer. Call it with the universal prefix
C-u
to copy comments as well.
If subed-mpv-client
reports (error "Service name too long")
, this
is probably because the path to the socket used to communicate with
MPV is too long for your operating system. You can use M-x customize
to set subed-mpv-socket-dir
to a shorter path.
subed
now uses subed-srt-mode
, subed-vtt-mode
, and
subed-ass-mode
instead of directly using subed-mode
. These modes
should be automatically associated with the .vtt
, .srt
, and .ass
extensions. If the generic subed-mode
is loaded instead of the format-specific mode,
you may get an error such as:
Error in post-command-hook (subed--post-command-handler): (cl-no-applicable-method subed--subtitle-id)
If you set auto-mode-alist
manually in your config, please make sure
you associate extensions the appropriate format-specific mode instead
of subed-mode
. The specific backend functions (ex:
subed-srt--jump-to-subtitle-id
) are also deprecated in favor of
using generic functions such as subed-jump-to-subtitle-id
.
Contributions would be really appreciated! subed conforms to the REUSE
Specification; this means that every file has copyright and license
information. If you modify a file, please update the year shown after
SPDX-FileCopyrightText
. Thank you!
There’s a list of authors in the file AUTHORS.org
. If you have at any point
contributed to subed, you are most welcome to add your name (and email
address if you like) to the list.
subed is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.