Generalized the Codebraid support to MkDocs

In microsoft#57 support for Codebraid syntax was added, which essentially is just
Pandoc attribute syntax, but with a specific class attribute added.

The support was added as an extra `identifier` in the list of languages,
for which Codebraid has support, such as for python:
`\\{\\.python.+?\\}`.

The below example would give the following scope: "text.html.markdown
markup.fenced_code.block.markdown fenced_code.block.language.markdown"
to the entire line:

```{.python .cb.nb jupyter_kernel=python3}
```

However the "language scope" should only be given to the "python" part,
and the current support doesn't allow spaces between the curly braces,
and it lacks support for all languages.

MkDocs allows a few ways to annotate fenced code blocks, but if
additional classes, id or key/value pairs are used, then the curly
braces must be used and the language must be prefixed with a dot.  In
simple cases where only the language is specified, then the curly braces
and the dot may be omitted.  The following are quick examples:

``` { .python #id .class title="My Title"}
```

or

``` python
```

This change removes the Codebraid support from the specific languages as
an `identifier` attribute, and moved into the RegEx by defining it as
two alternative cases: surrounded by curly braces or allowing them after
the language:

1. The case where the entire line after the code fence is wrapped in
   curly braces.  In this case the curly braces is not part of the
   language and attribute scope.
2. The case where the attributes follows the language specification in
   all sorts of ways (I'm specifically thinking of you Gatsby microsoft#62).  In
   this case the curly braces are included in the attribute scope as it
   is not trivial to handle all the various ways it may be used, and
   since this is the current behavior.

@microsoft-github-policy-service agree

Closes microsoft#153
Refs: https://github.com/Python-Markdown/markdown/blob/master/docs/extensions/fenced_code_blocks.md

build.js

@@ -13,7 +13,7 @@ const languages = [
 	{ name: 'lua', language: 'lua', identifiers: ['lua'], source: 'source.lua' },
 	{ name: 'makefile', language: 'makefile', identifiers: ['Makefile', 'makefile', 'GNUmakefile', 'OCamlMakefile'], source: 'source.makefile' },
 	{ name: 'perl', language: 'perl', identifiers: ['perl', 'pl', 'pm', 'pod', 't', 'PL', 'psgi', 'vcl'], source: 'source.perl' },
-	{ name: 'r', language: 'r', identifiers: ['R', 'r', 's', 'S', 'Rprofile', '\\{\\.r.+?\\}'], source: 'source.r' },
+	{ name: 'r', language: 'r', identifiers: ['R', 'r', 's', 'S', 'Rprofile'], source: 'source.r' },
 	{ name: 'ruby', language: 'ruby', identifiers: ['ruby', 'rb', 'rbx', 'rjs', 'Rakefile', 'rake', 'cgi', 'fcgi', 'gemspec', 'irbrc', 'Capfile', 'ru', 'prawn', 'Cheffile', 'Gemfile', 'Guardfile', 'Hobofile', 'Vagrantfile', 'Appraisals', 'Rantfile', 'Berksfile', 'Berksfile.lock', 'Thorfile', 'Puppetfile'], source: 'source.ruby' },
 	// 	Left to its own devices, the PHP grammar will match HTML as a combination of operators
 	// and constants. Therefore, HTML must take precedence over PHP in order to get proper
@@ -37,7 +37,7 @@ const languages = [
 	{ name: 'groovy', language: 'groovy', identifiers: ['groovy', 'gvy'], source: 'source.groovy' },
 	{ name: 'pug', language: 'pug', identifiers: ['jade', 'pug'], source: 'text.pug' },
 
-	{ name: 'js', language: 'javascript', identifiers: ['js', 'jsx', 'javascript', 'es6', 'mjs', 'cjs', 'dataviewjs', '\\{\\.js.+?\\}'], source: 'source.js' },
+	{ name: 'js', language: 'javascript', identifiers: ['js', 'jsx', 'javascript', 'es6', 'mjs', 'cjs', 'dataviewjs'], source: 'source.js' },
 	{ name: 'js_regexp', identifiers: ['regexp'], source: 'source.js.regexp' },
 	{ name: 'json', language: 'json', identifiers: ['json', 'json5', 'sublime-settings', 'sublime-menu', 'sublime-keymap', 'sublime-mousemap', 'sublime-theme', 'sublime-build', 'sublime-project', 'sublime-completions'], source: 'source.json' },
 	{ name: 'jsonc', language: 'jsonc', identifiers: ['jsonc'], source: 'source.json.comments' },
@@ -48,12 +48,12 @@ const languages = [
 
 	{ name: 'perl6', language: 'perl6', identifiers: ['perl6', 'p6', 'pl6', 'pm6', 'nqp'], source: 'source.perl.6' },
 	{ name: 'powershell', language: 'powershell', identifiers: ['powershell', 'ps1', 'psm1', 'psd1'], source: 'source.powershell' },
-	{ name: 'python', language: 'python', identifiers: ['python', 'py', 'py3', 'rpy', 'pyw', 'cpy', 'SConstruct', 'Sconstruct', 'sconstruct', 'SConscript', 'gyp', 'gypi', '\\{\\.python.+?\\}'], source: 'source.python' },
-	{ name: 'julia', language: 'julia', identifiers: ['julia', '\\{\\.julia.+?\\}'], source: 'source.julia' },
+	{ name: 'python', language: 'python', identifiers: ['python', 'py', 'py3', 'rpy', 'pyw', 'cpy', 'SConstruct', 'Sconstruct', 'sconstruct', 'SConscript', 'gyp', 'gypi'], source: 'source.python' },
+	{ name: 'julia', language: 'julia', identifiers: ['julia'], source: 'source.julia' },
 	{ name: 'regexp_python', identifiers: ['re'], source: 'source.regexp.python' },
-	{ name: 'rust', language: 'rust', identifiers: ['rust', 'rs', '\\{\\.rust.+?\\}'], source: 'source.rust' },
+	{ name: 'rust', language: 'rust', identifiers: ['rust', 'rs'], source: 'source.rust' },
 	{ name: 'scala', language: 'scala', identifiers: ['scala', 'sbt'], source: 'source.scala' },
-	{ name: 'shell', language: 'shellscript', identifiers: ['shell', 'sh', 'bash', 'zsh', 'bashrc', 'bash_profile', 'bash_login', 'profile', 'bash_logout', '.textmate_init', '\\{\\.bash.+?\\}'], source: 'source.shell' },
+	{ name: 'shell', language: 'shellscript', identifiers: ['shell', 'sh', 'bash', 'zsh', 'bashrc', 'bash_profile', 'bash_login', 'profile', 'bash_logout', '.textmate_init', 'bash.+?'], source: 'source.shell' },
 	{ name: 'ts', language: 'typescript', identifiers: ['typescript', 'ts'], source: 'source.ts' },
 	{ name: 'tsx', language: 'typescriptreact', identifiers: ['tsx'], source: 'source.tsx' },
 	{ name: 'csharp', language: 'csharp', identifiers: ['cs', 'csharp', 'c#'], source: 'source.cs' },
@@ -86,7 +86,7 @@ const fencedCodeBlockDefinition = (name, identifiers, sourceScope, language, add
 
 	return `fenced_code_block_${name}:
   begin:
-    (^|\\G)(\\s*)(\`{3,}|~{3,})\\s*(?i:(${identifiers.join('|')})((\\s+|:|,|\\{|\\?)[^\`]*)?$)
+    (^|\\G)(\\s*)([\`~]{3,})\\s*(?i:(?:\\{\\s*\\.?(${identifiers.join('|')})(?:\\}|\\s+([^\`\\r\\n]*?)?\\s*\\}))|(?:\\.?(\\g<4>)((?:\\s+|:|,|\\{|\\?)[^\`\\r\\n]*?)?))$
   name:
     markup.fenced_code.block.markdown
   end:
@@ -95,6 +95,8 @@ const fencedCodeBlockDefinition = (name, identifiers, sourceScope, language, add
     '3': {name: 'punctuation.definition.markdown'}
     '4': {name: 'fenced_code.block.language.markdown'}
     '5': {name: 'fenced_code.block.language.attributes.markdown'}
+    #'6': {name: 'fenced_code.block.language.markdown'}
+    '7': {name: 'fenced_code.block.language.attributes.markdown'}
   endCaptures:
     '3': {name: 'punctuation.definition.markdown'}
   patterns: