Master #6

re-noroi · 2025-01-03T12:35:38Z

No description provided.

Change-Id: I04ee389f100fc88019d72f817f7856ee738ca0c1 Signed-off-by: Kazuki H <[email protected]>

Signed-off-by: kvsnr113 <[email protected]>

…tion commit 07fd5b6cdf3cc30bfde8fe0f644771688be04447 upstream. Each cset (css_set) is pinned by its tasks. When we're moving tasks around across csets for a migration, we need to hold the source and destination csets to ensure that they don't go away while we're moving tasks about. This is done by linking cset->mg_preload_node on either the mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the same cset->mg_preload_node for both the src and dst lists was deemed okay as a cset can't be both the source and destination at the same time. Unfortunately, this overloading becomes problematic when multiple tasks are involved in a migration and some of them are identity noop migrations while others are actually moving across cgroups. For example, this can happen with the following sequence on cgroup1: #1> mkdir -p /sys/fs/cgroup/misc/a/b #2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs #3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS & #4> PID=$! #5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks #6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs the process including the group leader back into a. In this final migration, non-leader threads would be doing identity migration while the group leader is doing an actual one. After #3, let's say the whole process was in cset A, and that after #4, the leader moves to cset B. Then, during #6, the following happens: 1. cgroup_migrate_add_src() is called on B for the leader. 2. cgroup_migrate_add_src() is called on A for the other threads. 3. cgroup_migrate_prepare_dst() is called. It scans the src list. 4. It notices that B wants to migrate to A, so it tries to A to the dst list but realizes that its ->mg_preload_node is already busy. 5. and then it notices A wants to migrate to A as it's an identity migration, it culls it by list_del_init()'ing its ->mg_preload_node and putting references accordingly. 6. The rest of migration takes place with B on the src list but nothing on the dst list. This means that A isn't held while migration is in progress. If all tasks leave A before the migration finishes and the incoming task pins it, the cset will be destroyed leading to use-after-free. This is caused by overloading cset->mg_preload_node for both src and dst preload lists. We wanted to exclude the cset from the src list but ended up inadvertently excluding it from the dst list too. This patch fixes the issue by separating out cset->mg_preload_node into ->mg_src_preload_node and ->mg_dst_preload_node, so that the src and dst preloadings don't interfere with each other. Signed-off-by: Tejun Heo <[email protected]> Reported-by: Mukesh Ojha <[email protected]> Reported-by: shisiyuan <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Link: https://www.spinics.net/lists/cgroups/msg33313.html Fixes: f817de9 ("cgroup: prepare migration path for unified hierarchy") Cc: [email protected] # v3.16+ Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 2b1299322016731d56807aa49254a5ea3080b6b3 upstream. tl;dr: The Enhanced IBRS mitigation for Spectre v2 does not work as documented for RET instructions after VM exits. Mitigate it with a new one-entry RSB stuffing mechanism and a new LFENCE. == Background == Indirect Branch Restricted Speculation (IBRS) was designed to help mitigate Branch Target Injection and Speculative Store Bypass, i.e. Spectre, attacks. IBRS prevents software run in less privileged modes from affecting branch prediction in more privileged modes. IBRS requires the MSR to be written on every privilege level change. To overcome some of the performance issues of IBRS, Enhanced IBRS was introduced. eIBRS is an "always on" IBRS, in other words, just turn it on once instead of writing the MSR on every privilege level change. When eIBRS is enabled, more privileged modes should be protected from less privileged modes, including protecting VMMs from guests. == Problem == Here's a simplification of how guests are run on Linux' KVM: void run_kvm_guest(void) { // Prepare to run guest VMRESUME(); // Clean up after guest runs } The execution flow for that would look something like this to the processor: 1. Host-side: call run_kvm_guest() 2. Host-side: VMRESUME 3. Guest runs, does "CALL guest_function" 4. VM exit, host runs again 5. Host might make some "cleanup" function calls 6. Host-side: RET from run_kvm_guest() Now, when back on the host, there are a couple of possible scenarios of post-guest activity the host needs to do before executing host code: * on pre-eIBRS hardware (legacy IBRS, or nothing at all), the RSB is not touched and Linux has to do a 32-entry stuffing. * on eIBRS hardware, VM exit with IBRS enabled, or restoring the host IBRS=1 shortly after VM exit, has a documented side effect of flushing the RSB except in this PBRSB situation where the software needs to stuff the last RSB entry "by hand". IOW, with eIBRS supported, host RET instructions should no longer be influenced by guest behavior after the host retires a single CALL instruction. However, if the RET instructions are "unbalanced" with CALLs after a VM exit as is the RET in #6, it might speculatively use the address for the instruction after the CALL in #3 as an RSB prediction. This is a problem since the (untrusted) guest controls this address. Balanced CALL/RET instruction pairs such as in step #5 are not affected. == Solution == The PBRSB issue affects a wide variety of Intel processors which support eIBRS. But not all of them need mitigation. Today, X86_FEATURE_RETPOLINE triggers an RSB filling sequence that mitigates PBRSB. Systems setting RETPOLINE need no further mitigation - i.e., eIBRS systems which enable retpoline explicitly. However, such systems (X86_FEATURE_IBRS_ENHANCED) do not set RETPOLINE and most of them need a new mitigation. Therefore, introduce a new feature flag X86_FEATURE_RSB_VMEXIT_LITE which triggers a lighter-weight PBRSB mitigation versus RSB Filling at vmexit. The lighter-weight mitigation performs a CALL instruction which is immediately followed by a speculative execution barrier (INT3). This steers speculative execution to the barrier -- just like a retpoline -- which ensures that speculation can never reach an unbalanced RET. Then, ensure this CALL is retired before continuing execution with an LFENCE. In other words, the window of exposure is opened at VM exit where RET behavior is troublesome. While the window is open, force RSB predictions sampling for RET targets to a dead end at the INT3. Close the window with the LFENCE. There is a subset of eIBRS systems which are not vulnerable to PBRSB. Add these systems to the cpu_vuln_whitelist[] as NO_EIBRS_PBRSB. Future systems that aren't vulnerable will set ARCH_CAP_PBRSB_NO. [ bp: Massage, incorporate review comments from Andy Cooper. ] [ Pawan: Update commit message to replace RSB_VMEXIT with RETPOLINE ] Signed-off-by: Daniel Sneddon <[email protected]> Co-developed-by: Pawan Gupta <[email protected]> Signed-off-by: Pawan Gupta <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 2b1299322016731d56807aa49254a5ea3080b6b3 upstream. tl;dr: The Enhanced IBRS mitigation for Spectre v2 does not work as documented for RET instructions after VM exits. Mitigate it with a new one-entry RSB stuffing mechanism and a new LFENCE. == Background == Indirect Branch Restricted Speculation (IBRS) was designed to help mitigate Branch Target Injection and Speculative Store Bypass, i.e. Spectre, attacks. IBRS prevents software run in less privileged modes from affecting branch prediction in more privileged modes. IBRS requires the MSR to be written on every privilege level change. To overcome some of the performance issues of IBRS, Enhanced IBRS was introduced. eIBRS is an "always on" IBRS, in other words, just turn it on once instead of writing the MSR on every privilege level change. When eIBRS is enabled, more privileged modes should be protected from less privileged modes, including protecting VMMs from guests. == Problem == Here's a simplification of how guests are run on Linux' KVM: void run_kvm_guest(void) { // Prepare to run guest VMRESUME(); // Clean up after guest runs } The execution flow for that would look something like this to the processor: 1. Host-side: call run_kvm_guest() 2. Host-side: VMRESUME 3. Guest runs, does "CALL guest_function" 4. VM exit, host runs again 5. Host might make some "cleanup" function calls 6. Host-side: RET from run_kvm_guest() Now, when back on the host, there are a couple of possible scenarios of post-guest activity the host needs to do before executing host code: * on pre-eIBRS hardware (legacy IBRS, or nothing at all), the RSB is not touched and Linux has to do a 32-entry stuffing. * on eIBRS hardware, VM exit with IBRS enabled, or restoring the host IBRS=1 shortly after VM exit, has a documented side effect of flushing the RSB except in this PBRSB situation where the software needs to stuff the last RSB entry "by hand". IOW, with eIBRS supported, host RET instructions should no longer be influenced by guest behavior after the host retires a single CALL instruction. However, if the RET instructions are "unbalanced" with CALLs after a VM exit as is the RET in #6, it might speculatively use the address for the instruction after the CALL in #3 as an RSB prediction. This is a problem since the (untrusted) guest controls this address. Balanced CALL/RET instruction pairs such as in step #5 are not affected. == Solution == The PBRSB issue affects a wide variety of Intel processors which support eIBRS. But not all of them need mitigation. Today, X86_FEATURE_RSB_VMEXIT triggers an RSB filling sequence that mitigates PBRSB. Systems setting RSB_VMEXIT need no further mitigation - i.e., eIBRS systems which enable legacy IBRS explicitly. However, such systems (X86_FEATURE_IBRS_ENHANCED) do not set RSB_VMEXIT and most of them need a new mitigation. Therefore, introduce a new feature flag X86_FEATURE_RSB_VMEXIT_LITE which triggers a lighter-weight PBRSB mitigation versus RSB_VMEXIT. The lighter-weight mitigation performs a CALL instruction which is immediately followed by a speculative execution barrier (INT3). This steers speculative execution to the barrier -- just like a retpoline -- which ensures that speculation can never reach an unbalanced RET. Then, ensure this CALL is retired before continuing execution with an LFENCE. In other words, the window of exposure is opened at VM exit where RET behavior is troublesome. While the window is open, force RSB predictions sampling for RET targets to a dead end at the INT3. Close the window with the LFENCE. There is a subset of eIBRS systems which are not vulnerable to PBRSB. Add these systems to the cpu_vuln_whitelist[] as NO_EIBRS_PBRSB. Future systems that aren't vulnerable will set ARCH_CAP_PBRSB_NO. [ bp: Massage, incorporate review comments from Andy Cooper. ] Signed-off-by: Daniel Sneddon <[email protected]> Co-developed-by: Pawan Gupta <[email protected]> Signed-off-by: Pawan Gupta <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> [ bp: Adjust patch to account for kvm entry being in c ] Signed-off-by: Suraj Jitindar Singh <[email protected]> Signed-off-by: Suleiman Souhlal <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit cf2ea3c86ad90d63d1c572b43e1ca9276b0357ad ] I got a null-ptr-defer error report when I do the following tests on the qemu platform: make defconfig and CONFIG_PARPORT=m, CONFIG_PARPORT_PC=m, CONFIG_SND_MTS64=m Then making test scripts: cat>test_mod1.sh<<EOF modprobe snd-mts64 modprobe snd-mts64 EOF Executing the script, perhaps several times, we will get a null-ptr-defer report, as follow: syzkaller:~# ./test_mod.sh snd_mts64: probe of snd_mts64.0 failed with error -5 modprobe: ERROR: could not insert 'snd_mts64': No such device BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP PTI CPU: 0 PID: 205 Comm: modprobe Not tainted 6.1.0-rc8-00588-g76dcd734eca2 #6 Call Trace: <IRQ> snd_mts64_interrupt+0x24/0xa0 [snd_mts64] parport_irq_handler+0x37/0x50 [parport] __handle_irq_event_percpu+0x39/0x190 handle_irq_event_percpu+0xa/0x30 handle_irq_event+0x2f/0x50 handle_edge_irq+0x99/0x1b0 __common_interrupt+0x5d/0x100 common_interrupt+0xa0/0xc0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:_raw_write_unlock_irqrestore+0x11/0x30 parport_claim+0xbd/0x230 [parport] snd_mts64_probe+0x14a/0x465 [snd_mts64] platform_probe+0x3f/0xa0 really_probe+0x129/0x2c0 __driver_probe_device+0x6d/0xc0 driver_probe_device+0x1a/0xa0 __device_attach_driver+0x7a/0xb0 bus_for_each_drv+0x62/0xb0 __device_attach+0xe4/0x180 bus_probe_device+0x82/0xa0 device_add+0x550/0x920 platform_device_add+0x106/0x220 snd_mts64_attach+0x2e/0x80 [snd_mts64] port_check+0x14/0x20 [parport] bus_for_each_dev+0x6e/0xc0 __parport_register_driver+0x7c/0xb0 [parport] snd_mts64_module_init+0x31/0x1000 [snd_mts64] do_one_initcall+0x3c/0x1f0 do_init_module+0x46/0x1c6 load_module+0x1d8d/0x1e10 __do_sys_finit_module+0xa2/0xf0 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> Kernel panic - not syncing: Fatal exception in interrupt Rebooting in 1 seconds.. The mts wa not initialized during interrupt, we add check for mts to fix this bug. Fixes: 68ab801 ("[ALSA] Add snd-mts64 driver for ESI Miditerminal 4140") Signed-off-by: Gaosheng Cui <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…g the sock [ Upstream commit 3cf7203ca620682165706f70a1b12b5194607dce ] There is a race condition in vxlan that when deleting a vxlan device during receiving packets, there is a possibility that the sock is released after getting vxlan_sock vs from sk_user_data. Then in later vxlan_ecn_decapsulate(), vxlan_get_sk_family() we will got NULL pointer dereference. e.g. #0 [ffffa25ec6978a38] machine_kexec at ffffffff8c669757 #1 [ffffa25ec6978a90] __crash_kexec at ffffffff8c7c0a4d #2 [ffffa25ec6978b58] crash_kexec at ffffffff8c7c1c48 #3 [ffffa25ec6978b60] oops_end at ffffffff8c627f2b #4 [ffffa25ec6978b80] page_fault_oops at ffffffff8c678fcb #5 [ffffa25ec6978bd8] exc_page_fault at ffffffff8d109542 #6 [ffffa25ec6978c00] asm_exc_page_fault at ffffffff8d200b62 [exception RIP: vxlan_ecn_decapsulate+0x3b] RIP: ffffffffc1014e7b RSP: ffffa25ec6978cb0 RFLAGS: 00010246 RAX: 0000000000000008 RBX: ffff8aa000888000 RCX: 0000000000000000 RDX: 000000000000000e RSI: ffff8a9fc7ab803e RDI: ffff8a9fd1168700 RBP: ffff8a9fc7ab803e R8: 0000000000700000 R9: 00000000000010ae R10: ffff8a9fcb748980 R11: 0000000000000000 R12: ffff8a9fd1168700 R13: ffff8aa000888000 R14: 00000000002a0000 R15: 00000000000010ae ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffa25ec6978ce8] vxlan_rcv at ffffffffc10189cd [vxlan] #8 [ffffa25ec6978d90] udp_queue_rcv_one_skb at ffffffff8cfb6507 #9 [ffffa25ec6978dc0] udp_unicast_rcv_skb at ffffffff8cfb6e45 #10 [ffffa25ec6978dc8] __udp4_lib_rcv at ffffffff8cfb8807 #11 [ffffa25ec6978e20] ip_protocol_deliver_rcu at ffffffff8cf76951 #12 [ffffa25ec6978e48] ip_local_deliver at ffffffff8cf76bde #13 [ffffa25ec6978ea0] __netif_receive_skb_one_core at ffffffff8cecde9b #14 [ffffa25ec6978ec8] process_backlog at ffffffff8cece139 #15 [ffffa25ec6978f00] __napi_poll at ffffffff8ceced1a #16 [ffffa25ec6978f28] net_rx_action at ffffffff8cecf1f3 #17 [ffffa25ec6978fa0] __softirqentry_text_start at ffffffff8d4000ca #18 [ffffa25ec6978ff0] do_softirq at ffffffff8c6fbdc3 Reproducer: https://github.com/Mellanox/ovs-tests/blob/master/test-ovs-vxlan-remove-tunnel-during-traffic.sh Fix this by waiting for all sk_user_data reader to finish before releasing the sock. Reported-by: Jianlin Shi <[email protected]> Suggested-by: Jakub Sitnicki <[email protected]> Fixes: 6a93cc9 ("udp-tunnel: Add a few more UDP tunnel APIs") Signed-off-by: Hangbin Liu <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit b18cba09e374637a0a3759d856a6bca94c133952 ] Commit 9130b8d ("SUNRPC: allow for upcalls for the same uid but different gss service") introduced `auth` argument to __gss_find_upcall(), but in gss_pipe_downcall() it was left as NULL since it (and auth->service) was not (yet) determined. When multiple upcalls with the same uid and different service are ongoing, it could happen that __gss_find_upcall(), which returns the first match found in the pipe->in_downcall list, could not find the correct gss_msg corresponding to the downcall we are looking for. Moreover, it might return a msg which is not sent to rpc.gssd yet. We could see mount.nfs process hung in D state with multiple mount.nfs are executed in parallel. The call trace below is of CentOS 7.9 kernel-3.10.0-1160.24.1.el7.x86_64 but we observed the same hang w/ elrepo kernel-ml-6.0.7-1.el7. PID: 71258 TASK: ffff91ebd4be0000 CPU: 36 COMMAND: "mount.nfs" #0 [ffff9203ca3234f8] __schedule at ffffffffa3b8899f #1 [ffff9203ca323580] schedule at ffffffffa3b88eb9 #2 [ffff9203ca323590] gss_cred_init at ffffffffc0355818 [auth_rpcgss] #3 [ffff9203ca323658] rpcauth_lookup_credcache at ffffffffc0421ebc [sunrpc] #4 [ffff9203ca3236d8] gss_lookup_cred at ffffffffc0353633 [auth_rpcgss] #5 [ffff9203ca3236e8] rpcauth_lookupcred at ffffffffc0421581 [sunrpc] #6 [ffff9203ca323740] rpcauth_refreshcred at ffffffffc04223d3 [sunrpc] #7 [ffff9203ca3237a0] call_refresh at ffffffffc04103dc [sunrpc] #8 [ffff9203ca3237b8] __rpc_execute at ffffffffc041e1c9 [sunrpc] #9 [ffff9203ca323820] rpc_execute at ffffffffc0420a48 [sunrpc] The scenario is like this. Let's say there are two upcalls for services A and B, A -> B in pipe->in_downcall, B -> A in pipe->pipe. When rpc.gssd reads pipe to get the upcall msg corresponding to service B from pipe->pipe and then writes the response, in gss_pipe_downcall the msg corresponding to service A will be picked because only uid is used to find the msg and it is before the one for B in pipe->in_downcall. And the process waiting for the msg corresponding to service A will be woken up. Actual scheduing of that process might be after rpc.gssd processes the next msg. In rpc_pipe_generic_upcall it clears msg->errno (for A). The process is scheduled to see gss_msg->ctx == NULL and gss_msg->msg.errno == 0, therefore it cannot break the loop in gss_create_upcall and is never woken up after that. This patch adds a simple check to ensure that a msg which is not sent to rpc.gssd yet is not chosen as the matching upcall upon receiving a downcall. Signed-off-by: minoura makoto <[email protected]> Signed-off-by: Hiroshi Shimamoto <[email protected]> Tested-by: Hiroshi Shimamoto <[email protected]> Cc: Trond Myklebust <[email protected]> Fixes: 9130b8d ("SUNRPC: allow for upcalls for same uid but different gss service") Signed-off-by: Trond Myklebust <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 6c4ca03bd890566d873e3593b32d034bf2f5a087 ] During EEH error injection testing, a deadlock was encountered in the tg3 driver when tg3_io_error_detected() was attempting to cancel outstanding reset tasks: crash> foreach UN bt ... PID: 159 TASK: c0000000067c6000 CPU: 8 COMMAND: "eehd" ... #5 [c00000000681f990] __cancel_work_timer at c00000000019fd18 #6 [c00000000681fa30] tg3_io_error_detected at c00800000295f098 [tg3] #7 [c00000000681faf0] eeh_report_error at c00000000004e25c ... PID: 290 TASK: c000000036e5f800 CPU: 6 COMMAND: "kworker/6:1" ... #4 [c00000003721fbc0] rtnl_lock at c000000000c940d8 #5 [c00000003721fbe0] tg3_reset_task at c008000002969358 [tg3] #6 [c00000003721fc60] process_one_work at c00000000019e5c4 ... PID: 296 TASK: c000000037a65800 CPU: 21 COMMAND: "kworker/21:1" ... #4 [c000000037247bc0] rtnl_lock at c000000000c940d8 #5 [c000000037247be0] tg3_reset_task at c008000002969358 [tg3] #6 [c000000037247c60] process_one_work at c00000000019e5c4 ... PID: 655 TASK: c000000036f49000 CPU: 16 COMMAND: "kworker/16:2" ...:1 #4 [c0000000373ebbc0] rtnl_lock at c000000000c940d8 #5 [c0000000373ebbe0] tg3_reset_task at c008000002969358 [tg3] #6 [c0000000373ebc60] process_one_work at c00000000019e5c4 ... Code inspection shows that both tg3_io_error_detected() and tg3_reset_task() attempt to acquire the RTNL lock at the beginning of their code blocks. If tg3_reset_task() should happen to execute between the times when tg3_io_error_deteced() acquires the RTNL lock and tg3_reset_task_cancel() is called, a deadlock will occur. Moving tg3_reset_task_cancel() call earlier within the code block, prior to acquiring RTNL, prevents this from happening, but also exposes another deadlock issue where tg3_reset_task() may execute AFTER tg3_io_error_detected() has executed: crash> foreach UN bt PID: 159 TASK: c0000000067d2000 CPU: 9 COMMAND: "eehd" ... #4 [c000000006867a60] rtnl_lock at c000000000c940d8 #5 [c000000006867a80] tg3_io_slot_reset at c0080000026c2ea8 [tg3] #6 [c000000006867b00] eeh_report_reset at c00000000004de88 ... PID: 363 TASK: c000000037564000 CPU: 6 COMMAND: "kworker/6:1" ... #3 [c000000036c1bb70] msleep at c000000000259e6c #4 [c000000036c1bba0] napi_disable at c000000000c6b848 #5 [c000000036c1bbe0] tg3_reset_task at c0080000026d942c [tg3] #6 [c000000036c1bc60] process_one_work at c00000000019e5c4 ... This issue can be avoided by aborting tg3_reset_task() if EEH error recovery is already in progress. Fixes: db84bf4 ("tg3: tg3_reset_task() needs to use rtnl_lock to synchronize") Signed-off-by: David Christensen <[email protected]> Reviewed-by: Pavan Chebbi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 60eed1e3d45045623e46944ebc7c42c30a4350f0 upstream. code path: ocfs2_ioctl_move_extents ocfs2_move_extents ocfs2_defrag_extent __ocfs2_move_extent + ocfs2_journal_access_di + ocfs2_split_extent //sub-paths call jbd2_journal_restart + ocfs2_journal_dirty //crash by jbs2 ASSERT crash stacks: PID: 11297 TASK: ffff974a676dcd00 CPU: 67 COMMAND: "defragfs.ocfs2" #0 [ffffb25d8dad3900] machine_kexec at ffffffff8386fe01 #1 [ffffb25d8dad3958] __crash_kexec at ffffffff8395959d #2 [ffffb25d8dad3a20] crash_kexec at ffffffff8395a45d #3 [ffffb25d8dad3a38] oops_end at ffffffff83836d3f #4 [ffffb25d8dad3a58] do_trap at ffffffff83833205 #5 [ffffb25d8dad3aa0] do_invalid_op at ffffffff83833aa6 #6 [ffffb25d8dad3ac0] invalid_op at ffffffff84200d18 [exception RIP: jbd2_journal_dirty_metadata+0x2ba] RIP: ffffffffc09ca54a RSP: ffffb25d8dad3b70 RFLAGS: 00010207 RAX: 0000000000000000 RBX: ffff9706eedc5248 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff97337029ea28 RDI: ffff9706eedc5250 RBP: ffff9703c3520200 R8: 000000000f46b0b2 R9: 0000000000000000 R10: 0000000000000001 R11: 00000001000000fe R12: ffff97337029ea28 R13: 0000000000000000 R14: ffff9703de59bf60 R15: ffff9706eedc5250 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffb25d8dad3ba8] ocfs2_journal_dirty at ffffffffc137fb95 [ocfs2] #8 [ffffb25d8dad3be8] __ocfs2_move_extent at ffffffffc139a950 [ocfs2] #9 [ffffb25d8dad3c80] ocfs2_defrag_extent at ffffffffc139b2d2 [ocfs2] Analysis This bug has the same root cause of 'commit 7f27ec9 ("ocfs2: call ocfs2_journal_access_di() before ocfs2_journal_dirty() in ocfs2_write_end_nolock()")'. For this bug, jbd2_journal_restart() is called by ocfs2_split_extent() during defragmenting. How to fix For ocfs2_split_extent() can handle journal operations totally by itself. Caller doesn't need to call journal access/dirty pair, and caller only needs to call journal start/stop pair. The fix method is to remove journal access/dirty from __ocfs2_move_extent(). The discussion for this patch: https://oss.oracle.com/pipermail/ocfs2-devel/2023-February/000647.html Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Heming Zhao <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 1efda38d6f9ba26ac88b359c6277f1172db03f1e upstream. The system call gate area counts as kernel text but trying to install a kprobe in this area fails with an Oops later on. To fix this explicitly disallow the gate area for kprobes. Found by syzkaller with the following reproducer: perf_event_open$cgroup(&(0x7f00000001c0)={0x6, 0x80, 0x0, 0x0, 0x0, 0x0, 0x80ffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, @perf_config_ext={0x0, 0xffffffffff600000}}, 0xffffffffffffffff, 0x0, 0xffffffffffffffff, 0x0) Sample report: BUG: unable to handle page fault for address: fffffbfff3ac6000 PGD 6dfcb067 P4D 6dfcb067 PUD 6df8f067 PMD 6de4d067 PTE 0 Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 21978 Comm: syz-executor.2 Not tainted 6.0.0-rc3-00363-g7726d4c3e60b-dirty #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__insn_get_emulate_prefix arch/x86/lib/insn.c:91 [inline] RIP: 0010:insn_get_emulate_prefix arch/x86/lib/insn.c:106 [inline] RIP: 0010:insn_get_prefixes.part.0+0xa8/0x1110 arch/x86/lib/insn.c:134 Code: 49 be 00 00 00 00 00 fc ff df 48 8b 40 60 48 89 44 24 08 e9 81 00 00 00 e8 e5 4b 39 ff 4c 89 fa 4c 89 f9 48 c1 ea 03 83 e1 07 <42> 0f b6 14 32 38 ca 7f 08 84 d2 0f 85 06 10 00 00 48 89 d8 48 89 RSP: 0018:ffffc900088bf860 EFLAGS: 00010246 RAX: 0000000000040000 RBX: ffffffff9b9bebc0 RCX: 0000000000000000 RDX: 1ffffffff3ac6000 RSI: ffffc90002d82000 RDI: ffffc900088bf9e8 RBP: ffffffff9d630001 R08: 0000000000000000 R09: ffffc900088bf9e8 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 R13: ffffffff9d630000 R14: dffffc0000000000 R15: ffffffff9d630000 FS: 00007f63eef63640(0000) GS:ffff88806d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff3ac6000 CR3: 0000000029d90005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> insn_get_prefixes arch/x86/lib/insn.c:131 [inline] insn_get_opcode arch/x86/lib/insn.c:272 [inline] insn_get_modrm+0x64a/0x7b0 arch/x86/lib/insn.c:343 insn_get_sib+0x29a/0x330 arch/x86/lib/insn.c:421 insn_get_displacement+0x350/0x6b0 arch/x86/lib/insn.c:464 insn_get_immediate arch/x86/lib/insn.c:632 [inline] insn_get_length arch/x86/lib/insn.c:707 [inline] insn_decode+0x43a/0x490 arch/x86/lib/insn.c:747 can_probe+0xfc/0x1d0 arch/x86/kernel/kprobes/core.c:282 arch_prepare_kprobe+0x79/0x1c0 arch/x86/kernel/kprobes/core.c:739 prepare_kprobe kernel/kprobes.c:1160 [inline] register_kprobe kernel/kprobes.c:1641 [inline] register_kprobe+0xb6e/0x1690 kernel/kprobes.c:1603 __register_trace_kprobe kernel/trace/trace_kprobe.c:509 [inline] __register_trace_kprobe+0x26a/0x2d0 kernel/trace/trace_kprobe.c:477 create_local_trace_kprobe+0x1f7/0x350 kernel/trace/trace_kprobe.c:1833 perf_kprobe_init+0x18c/0x280 kernel/trace/trace_event_perf.c:271 perf_kprobe_event_init+0xf8/0x1c0 kernel/events/core.c:9888 perf_try_init_event+0x12d/0x570 kernel/events/core.c:11261 perf_init_event kernel/events/core.c:11325 [inline] perf_event_alloc.part.0+0xf7f/0x36a0 kernel/events/core.c:11619 perf_event_alloc kernel/events/core.c:12059 [inline] __do_sys_perf_event_open+0x4a8/0x2a00 kernel/events/core.c:12157 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f63ef7efaed Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f63eef63028 EFLAGS: 00000246 ORIG_RAX: 000000000000012a RAX: ffffffffffffffda RBX: 00007f63ef90ff80 RCX: 00007f63ef7efaed RDX: 0000000000000000 RSI: ffffffffffffffff RDI: 00000000200001c0 RBP: 00007f63ef86019c R08: 0000000000000000 R09: 0000000000000000 R10: ffffffffffffffff R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000002 R14: 00007f63ef90ff80 R15: 00007f63eef43000 </TASK> Modules linked in: CR2: fffffbfff3ac6000 ---[ end trace 0000000000000000 ]--- RIP: 0010:__insn_get_emulate_prefix arch/x86/lib/insn.c:91 [inline] RIP: 0010:insn_get_emulate_prefix arch/x86/lib/insn.c:106 [inline] RIP: 0010:insn_get_prefixes.part.0+0xa8/0x1110 arch/x86/lib/insn.c:134 Code: 49 be 00 00 00 00 00 fc ff df 48 8b 40 60 48 89 44 24 08 e9 81 00 00 00 e8 e5 4b 39 ff 4c 89 fa 4c 89 f9 48 c1 ea 03 83 e1 07 <42> 0f b6 14 32 38 ca 7f 08 84 d2 0f 85 06 10 00 00 48 89 d8 48 89 RSP: 0018:ffffc900088bf860 EFLAGS: 00010246 RAX: 0000000000040000 RBX: ffffffff9b9bebc0 RCX: 0000000000000000 RDX: 1ffffffff3ac6000 RSI: ffffc90002d82000 RDI: ffffc900088bf9e8 RBP: ffffffff9d630001 R08: 0000000000000000 R09: ffffc900088bf9e8 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 R13: ffffffff9d630000 R14: dffffc0000000000 R15: ffffffff9d630000 FS: 00007f63eef63640(0000) GS:ffff88806d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff3ac6000 CR3: 0000000029d90005 CR4: 0000000000770ef0 PKRU: 55555554 ================================================================== Link: https://lkml.kernel.org/r/[email protected] cc: "Naveen N. Rao" <[email protected]> cc: Anil S Keshavamurthy <[email protected]> cc: "David S. Miller" <[email protected]> Cc: [email protected] Fixes: 1da177e ("Linux-2.6.12-rc2") Acked-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Christian A. Ehrhardt <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 84a53580c5d2138c7361c7c3eea5b31827e63b35 ] The SRv6 layer allows defining HMAC data that can later be used to sign IPv6 Segment Routing Headers. This configuration is realised via netlink through four attributes: SEG6_ATTR_HMACKEYID, SEG6_ATTR_SECRET, SEG6_ATTR_SECRETLEN and SEG6_ATTR_ALGID. Because the SECRETLEN attribute is decoupled from the actual length of the SECRET attribute, it is possible to provide invalid combinations (e.g., secret = "", secretlen = 64). This case is not checked in the code and with an appropriately crafted netlink message, an out-of-bounds read of up to 64 bytes (max secret length) can occur past the skb end pointer and into skb_shared_info: Breakpoint 1, seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 208 memcpy(hinfo->secret, secret, slen); (gdb) bt #0 seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 #1 0xffffffff81e012e9 in genl_family_rcv_msg_doit (skb=skb@entry=0xffff88800b1f9f00, nlh=nlh@entry=0xffff88800b1b7600, extack=extack@entry=0xffffc90000ba7af0, ops=ops@entry=0xffffc90000ba7a80, hdrlen=4, net=0xffffffff84237580 <init_net>, family=<optimized out>, family=<optimized out>) at net/netlink/genetlink.c:731 #2 0xffffffff81e01435 in genl_family_rcv_msg (extack=0xffffc90000ba7af0, nlh=0xffff88800b1b7600, skb=0xffff88800b1f9f00, family=0xffffffff82fef6c0 <seg6_genl_family>) at net/netlink/genetlink.c:775 #3 genl_rcv_msg (skb=0xffff88800b1f9f00, nlh=0xffff88800b1b7600, extack=0xffffc90000ba7af0) at net/netlink/genetlink.c:792 #4 0xffffffff81dfffc3 in netlink_rcv_skb (skb=skb@entry=0xffff88800b1f9f00, cb=cb@entry=0xffffffff81e01350 <genl_rcv_msg>) at net/netlink/af_netlink.c:2501 #5 0xffffffff81e00919 in genl_rcv (skb=0xffff88800b1f9f00) at net/netlink/genetlink.c:803 #6 0xffffffff81dff6ae in netlink_unicast_kernel (ssk=0xffff888010eec800, skb=0xffff88800b1f9f00, sk=0xffff888004aed000) at net/netlink/af_netlink.c:1319 #7 netlink_unicast (ssk=ssk@entry=0xffff888010eec800, skb=skb@entry=0xffff88800b1f9f00, portid=portid@entry=0, nonblock=<optimized out>) at net/netlink/af_netlink.c:1345 #8 0xffffffff81dff9a4 in netlink_sendmsg (sock=<optimized out>, msg=0xffffc90000ba7e48, len=<optimized out>) at net/netlink/af_netlink.c:1921 ... (gdb) p/x ((struct sk_buff *)0xffff88800b1f9f00)->head + ((struct sk_buff *)0xffff88800b1f9f00)->end $1 = 0xffff88800b1b76c0 (gdb) p/x secret $2 = 0xffff88800b1b76c0 (gdb) p slen $3 = 64 '@' The OOB data can then be read back from userspace by dumping HMAC state. This commit fixes this by ensuring SECRETLEN cannot exceed the actual length of SECRET. Reported-by: Lucas Leong <[email protected]> Tested: verified that EINVAL is correctly returned when secretlen > len(secret) Fixes: 4f4853d ("ipv6: sr: implement API to control SR HMAC structure") Signed-off-by: David Lebrun <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 81225b2ea161af48e093f58e8dfee6d705b16af4 ] If an AF_PACKET socket is used to send packets through ipvlan and the default xmit function of the AF_PACKET socket is changed from dev_queue_xmit() to packet_direct_xmit() via setsockopt() with the option name of PACKET_QDISC_BYPASS, the skb->mac_header may not be reset and remains as the initial value of 65535, this may trigger slab-out-of-bounds bugs as following: ================================================================= UG: KASAN: slab-out-of-bounds in ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan] PU: 2 PID: 1768 Comm: raw_send Kdump: loaded Not tainted 6.0.0-rc4+ #6 ardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 all Trace: print_address_description.constprop.0+0x1d/0x160 print_report.cold+0x4f/0x112 kasan_report+0xa3/0x130 ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan] ipvlan_start_xmit+0x29/0xa0 [ipvlan] __dev_direct_xmit+0x2e2/0x380 packet_direct_xmit+0x22/0x60 packet_snd+0x7c9/0xc40 sock_sendmsg+0x9a/0xa0 __sys_sendto+0x18a/0x230 __x64_sys_sendto+0x74/0x90 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is: 1. packet_snd() only reset skb->mac_header when sock->type is SOCK_RAW and skb->protocol is not specified as in packet_parse_headers() 2. packet_direct_xmit() doesn't reset skb->mac_header as dev_queue_xmit() In this case, skb->mac_header is 65535 when ipvlan_xmit_mode_l2() is called. So when ipvlan_xmit_mode_l2() gets mac header with eth_hdr() which use "skb->head + skb->mac_header", out-of-bound access occurs. This patch replaces eth_hdr() with skb_eth_hdr() in ipvlan_xmit_mode_l2() and reset mac header in multicast to solve this out-of-bound bug. Fixes: 2ad7bf3 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Lu Wei <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

re-noroi added 3 commits January 3, 2025 17:43

Signed-off-by: re-noroi <[email protected]>

f31a2c9

drivers: bq2597x: Remove floating point arithmetics

997f738

Change-Id: I04ee389f100fc88019d72f817f7856ee738ca0c1 Signed-off-by: Kazuki H <[email protected]>

munch/alioth/apollo: dtsi: restore stuff from stock dtsi

8890d87

Signed-off-by: kvsnr113 <[email protected]>

re-noroi merged commit 0da73d2 into staging Jan 3, 2025

re-noroi mentioned this pull request Jan 3, 2025

Revert "Master" #7

Merged

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Master #6

Master #6

re-noroi commented Jan 3, 2025

Master #6

Master #6

Conversation

re-noroi commented Jan 3, 2025