Motion not working after firmware upgrade. #1055

ifermon · 2015-07-10T18:53:23Z

This release (d4945b3b77d29cc5bb3777734422c048c1f1d003 ) broke motion for me. Got kernel panics. Motion stated in the grey screen (video served on 8080) that it was unable to open device (/dev/video0). Validated that device existed and motion log did not mention issues with device, it said that it was unable to use the video format (8). Running rasbian on an un-overclocked (non-overclocked?) rPi v2. Everything updated / upgraded. Using the pi camera module. Rolled back and everything worked fine, but I'm happy to roll back forward to break it again and do some debugging, just let me know if I can help. Rolled back to 19debde. Apologies if this is the wrong place to put this.

kernel: BCM270X_DT: I2S needs function Alt2 See: raspberrypi/linux#1046 kernel: vchiq_arm: Two cacheing fixes See: raspberrypi/firmware#443 kernel: BCM270X_DT: Overlay for the Fen Logic VGA666 board firmware: arm_loader: Increase stack and ensure icache flush is done before threads in execute multi firmware: arm_loader: Switch to vpu queues and more profile logging firmware: clocks: Allow arm to be overclocked to 1.6GHz firmware: gpioman: Don't force all pin pulls to their defaults firmware: arm_loader: Fix length on get palette mailbox call See: raspberrypi/linux#1026 firmware: vchiq: Better error handling firmware: vchiq: Make fragment size vary with cache line size See: raspberrypi/firmware#443

6by9 · 2015-07-10T21:58:14Z

Please provide logs of the kernel panic text.
Motion can be a pain to set up, so it would be useful to avoid wasting time having to try to get it running before getting anything useful.

6by9 · 2015-07-11T07:22:06Z

@pelwell This is likely to be linked to the VCHIQ changes :-(

popcornmix · 2015-07-11T15:03:43Z

@ifermon I believe this update included vchiq changes to both kernel and firmware.
Can you test with latest kernel, but previous firmware?
(e.g. update to latest firmware, then overwrite start*.elf and fixup*.dat from the previous firmware)
That will narrow down the issue to gpu firmware or kernel.

ifermon · 2015-07-11T15:27:36Z

I will do that. It will have to wait until Monday.
On Sat, Jul 11, 2015 at 11:04 AM popcornmix notifications-at-github.aaakk.us.kg
|github-ifermon| [email protected] wrote:

@ifermon https://github.com/ifermon I believe this update included
vchiq changes to both kernel and firmware.
Can you test with latest kernel, but previous firmware?
(e.g. update to latest firmware, then overwrite start_.elf and fixup_.dat
from the previous firmware)
That will narrow down the issue to gpu firmware or kernel.

—
Reply to this email directly or view it on GitHub
#1055 (comment)..

6by9 · 2015-07-12T08:28:23Z

I'm not sure whether reverting just the firmware will help too much. Phil's commit text on 5d5a5ce says that the firmware added a DT entry to say that it supported the new mechanism, and the kernel changes only activated if it found this.
It might exclude a silly error, but not sure it will really narrow down the issue.

The V4L2 driver does some flushing itself, so it's possible that is interfering with the new flushing. Not convinced though as the logs quoted on https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=62364&start=350#p787559 appear to show it being the setup phase failing (no reports of kernel panics).
I'll try to do some testing this afternoon/evening. Seeing whether the steps in the first entry of https://www.raspberrypi.org/forums/viewtopic.php?f=43&t=62364 work for basic capturing would be a start.

6by9 · 2015-07-13T12:21:25Z

Just reproduced. HEAD/d4945b3 fails, but 19debde is OK, so it does look like the VCHIQ change.

Setting up the driver with v4l2-ctl -v width=1280,height=720,pixelformat=YU12 works fine, but starting streaming with v4l2-ctl --stream-mmap=3 --stream-count=100 --stream-to=/dev/null has caused a kernel oops due to a paging request. Call stack is showing it in ieee80211_phy0: rt2x00usb_vendor_request (yes, I'm using wifi), but I suspect it's a memory trample.
The system does recover though on ctrl-C, though throws the videobuf2_core warning due to not cleaning up all buffers properly (issue already logged, but not had a chance to investigate).

I will try with the previous firmware and current kernel, but as I commented above, I think that will just disable the kernel changes.
Testing raspistillyuv may also be useful as that will start throwing around large buffers via bulk receives, so I'll give that a go.

edit: MMAL is wedged after the kernel oops. Will check with the debugger what has happened there.

popcornmix · 2015-07-13T12:26:41Z

There were actual vchiq changes to firmware, as well as the DT changes.
So using latest firmware without latest kernel may be a valid test.

6by9 · 2015-07-13T12:31:54Z

Yup. I'm just looking at the diffs to see what changed and how messy latest firmware with old kernel could be.
Sounds like a rogue memcpy at the moment though, at a guess on fully aligned transfers (original issue was with H264 which are random length transfers. YU12 will be nicely aligned)

6by9 · 2015-07-13T14:55:09Z

Not got any further in testing this, and need to work on something else again now.
raspiyuv seems happy at 640x480, so alignment may be a red herring.

pelwell · 2015-07-13T14:56:37Z

I'm just finishing up another issue, so I can pick this up.

ifermon · 2015-07-13T17:36:18Z

At this point, is there anything I can do to help? It sounds like you've already been able to recreate the issue. I'd like to help, but my C skills are weak at best. No way could I find a memory leak in a driver. But if you want me to do some other tests or get some logs then please let me know. I'd also be happy to test a fix - I can do builds.

pelwell · 2015-07-13T18:03:46Z

Thanks for the offer, but with a reliable way to reproduce this (6by9's v4l2-ctl command) it shouldn't take long to fix.

See: #1055

pelwell · 2015-07-14T10:56:36Z

Disappointing - it was a cut-and-paste error into a code path not tested by my existing tests. I've pushed a patch to the 4.0 and 4.1 kernel branches, and with it included I see no new(*) problems with the v4l2-ctl test.

(*) At shutdown time, the bcm2835-v4l2 driver causes a kernel WARNING, both with and without the recent VCHIQ changes. I'll create a new issue for that.

pelwell · 2015-07-14T11:01:00Z

Ah - it looks like I've rediscovered #817.

See: raspberrypi/linux#1055

popcornmix · 2015-07-14T13:03:35Z

Can you test after running rpi-update?

ifermon · 2015-07-15T15:32:37Z

You guys rock. Just ran rpi-update and running motion with no errors. Happy to help in the future, just send me a message - appreciate all you guys / gals do to move this forward.

See: #1055

Signed-off-by: popcornmix <[email protected]> vchiq: create_pagelist copes with vmalloc memory Signed-off-by: Daniel Stone <[email protected]> vchiq: fix the shim message release Signed-off-by: Daniel Stone <[email protected]> vchiq: export additional symbols Signed-off-by: Daniel Stone <[email protected]> VCHIQ: Make service closure fully synchronous (drv) This is one half of a two-part patch, the other half of which is to the vchiq_lib user library. With these patches, calls to vchiq_close_service and vchiq_remove_service won't return until any associated callbacks have been delivered to the callback thread. VCHIQ: Add per-service tracing The new service option VCHIQ_SERVICE_OPTION_TRACE is a boolean that toggles tracing for the specified service. This commit also introduces vchi_service_set_option and the associated option VCHI_SERVICE_OPTION_TRACE. vchiq: Make the synchronous-CLOSE logic more tolerant vchiq: Move logging control into debugfs vchiq: Take care of a corner case tickled by VCSM Closing a connection that isn't fully open requires care, since one side does not know the other side's port number. Code was present to handle the case where a CLOSE is sent immediately after an OPEN, i.e. before the OPENACK has been received, but this was incorrectly being used when an OPEN from a client using port 0 was rejected. (In the observed failure, the host was attempting to use the VCSM service, which isn't present in the 'cutdown' firmware. The failure was intermittent because sometimes the keepalive service would grab port 0.) This case can be distinguished because the client's remoteport will still be VCHIQ_PORT_FREE, and the srvstate will be OPENING. Either condition is sufficient to differentiate it from the special case described above. vchiq: Avoid high load when blocked and unkillable vchiq: Include SIGSTOP and SIGCONT in list of signals not-masked by vchiq to allow gdb to work vchiq_arm: Complete support for SYNCHRONOUS mode vchiq: Remove inline from suspend/resume vchiq: Allocation does not need to be atomic vchiq: Fix wrong condition check The log level is checked from within the log call. Remove the check in the call. Signed-off-by: Pranith Kumar <[email protected]> BCM270x: Add vchiq device to platform file and Device Tree Prepare to turn the vchiq module into a driver. Signed-off-by: Noralf Trønnes <[email protected]> bcm2708: vchiq: Add Device Tree support Turn vchiq into a driver and stop hardcoding resources. Use devm_* functions in probe path to simplify cleanup. A global variable is used to hold the register address. This is done to keep this patch as small as possible. Also make available on ARCH_BCM2835. Based on work by Lubomir Rintel. Signed-off-by: Noralf Trønnes <[email protected]> vchiq: Change logging level for inbound data vchiq_arm: Two cacheing fixes 1) Make fragment size vary with cache line size Without this patch, non-cache-line-aligned transfers may corrupt (or be corrupted by) adjacent data structures. Both ARM and VC need to be updated to enable this feature. This is ensured by having the loader apply a new DT parameter - cache-line-size. The existence of this parameter guarantees that the kernel is capable, and the parameter will only be modified from the safe default if the loader is capable. 2) Flush/invalidate vmalloc'd memory, and invalidate after reads vchiq: fix NULL pointer dereference when closing driver The following code run as root will cause a null pointer dereference oops: int fd = open("/dev/vc-cma", O_RDONLY); if (fd < 0) err(1, "open failed"); (void)close(fd); [ 1704.877721] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 1704.877725] pgd = b899c000 [ 1704.877736] [00000000] *pgd=37fab831, *pte=00000000, *ppte=00000000 [ 1704.877748] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 1704.877765] Modules linked in: evdev i2c_bcm2708 uio_pdrv_genirq uio [ 1704.877774] CPU: 2 PID: 3656 Comm: stress-ng-fstat Not tainted 3.19.1-12-generic-bcm2709 #12-Ubuntu [ 1704.877777] Hardware name: BCM2709 [ 1704.877783] task: b8ab9b00 ti: b7e68000 task.ti: b7e68000 [ 1704.877798] PC is at __down_interruptible+0x50/0xec [ 1704.877806] LR is at down_interruptible+0x5c/0x68 [ 1704.877813] pc : [<80630ee8>] lr : [<800704b0>] psr: 60080093 sp : b7e69e50 ip : b7e69e88 fp : b7e69e84 [ 1704.877817] r10: b88123c8 r9 : 00000010 r8 : 00000001 [ 1704.877822] r7 : b8ab9b00 r6 : 7fffffff r5 : 80a1cc34 r4 : 80a1cc34 [ 1704.877826] r3 : b7e69e50 r2 : 00000000 r1 : 00000000 r0 : 80a1cc34 [ 1704.877833] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1704.877838] Control: 10c5387d Table: 3899c06a DAC: 00000015 [ 1704.877843] Process do-oops (pid: 3656, stack limit = 0xb7e68238) [ 1704.877848] Stack: (0xb7e69e50 to 0xb7e6a000) [ 1704.877856] 9e40: 80a1cc3c 00000000 00000010 b88123c8 [ 1704.877865] 9e60: b7e69e84 80a1cc34 fff9fee9 ffffffff b7e68000 00000009 b7e69ea4 b7e69e88 [ 1704.877874] 9e80: 800704b0 80630ea4 fff9fee9 60080013 80a1cc28 fff9fee9 b7e69edc b7e69ea8 [ 1704.877884] 9ea0: 8040f558 80070460 fff9fee9 ffffffff 00000000 00000000 00000009 80a1cb7c [ 1704.877893] 9ec0: 00000000 80a1cb7c 00000000 00000010 b7e69ef4 b7e69ee0 803e1ba4 8040f514 [ 1704.877902] 9ee0: 00000e48 80a1cb7c b7e69f14 b7e69ef8 803e1c9c 803e1b74 b88123c0 b92acb18 [ 1704.877911] 9f00: b8812790 b8d815d8 b7e69f24 b7e69f18 803e2250 803e1bc8 b7e69f5c b7e69f28 [ 1704.877921] 9f20: 80167bac 803e222c 00000000 00000000 b7e69f54 b8ab9ffc 00000000 8098c794 [ 1704.877930] 9f40: b8ab9b00 8000efc4 b7e68000 00000000 b7e69f6c b7e69f60 80167d6c 80167b28 [ 1704.877939] 9f60: b7e69f8c b7e69f70 80047d38 80167d60 b7e68000 b7e68010 8000efc4 b7e69fb0 [ 1704.877949] 9f80: b7e69fac b7e69f90 80012820 80047c84 01155490 011549a8 00000001 00000006 [ 1704.877957] 9fa0: 00000000 b7e69fb0 8000ee5c 80012790 00000000 353d8c0f 7efc4308 00000000 [ 1704.877966] 9fc0: 01155490 011549a8 00000001 00000006 00000000 00000000 76cf3ba0 00000003 [ 1704.877975] 9fe0: 00000000 7efc42e4 0002272f 76e2ed66 60080030 00000003 00000000 00000000 [ 1704.877998] [<80630ee8>] (__down_interruptible) from [<800704b0>] (down_interruptible+0x5c/0x68) [ 1704.878015] [<800704b0>] (down_interruptible) from [<8040f558>] (vchiu_queue_push+0x50/0xd8) [ 1704.878032] [<8040f558>] (vchiu_queue_push) from [<803e1ba4>] (send_worker_msg+0x3c/0x54) [ 1704.878045] [<803e1ba4>] (send_worker_msg) from [<803e1c9c>] (vc_cma_set_reserve+0xe0/0x1c4) [ 1704.878057] [<803e1c9c>] (vc_cma_set_reserve) from [<803e2250>] (vc_cma_release+0x30/0x38) [ 1704.878069] [<803e2250>] (vc_cma_release) from [<80167bac>] (__fput+0x90/0x1e0) [ 1704.878082] [<80167bac>] (__fput) from [<80167d6c>] (____fput+0x18/0x1c) [ 1704.878094] [<80167d6c>] (____fput) from [<80047d38>] (task_work_run+0xc0/0xf8) [ 1704.878109] [<80047d38>] (task_work_run) from [<80012820>] (do_work_pending+0x9c/0xc4) [ 1704.878123] [<80012820>] (do_work_pending) from [<8000ee5c>] (work_pending+0xc/0x20) [ 1704.878133] Code: e50b1034 e3a01000 e50b2030 e580300c (e5823000) ..the fix is to ensure that we have actually initialized the queue before we attempt to push any items onto it. This occurs if we do an open() followed by a close() without any activity in between. Signed-off-by: Colin Ian King <[email protected]> vchiq_arm: Sort out the vmalloc case See: #1055 vchiq: hack: Add include depecated dma include file vchiq_arm: Tweak the logging output Signed-off-by: Phil Elwell <[email protected]> vchiq_arm: Access the dequeue_pending flag locked Reading through this code looking for another problem (now found in userland) the use of dequeue_pending outside a lock didn't seem safe. Signed-off-by: Phil Elwell <[email protected]> vchiq_arm: Service callbacks must not fail Service callbacks are not allowed to return an error. The internal callback that delivers events and messages to user tasks does not enqueue them if the service is closing, but this is not an error and should not be reported as such. Signed-off-by: Phil Elwell <[email protected]> vchiq_arm: do not use page_cache_release(page) macro (#1403) This macro is gone since 1fa64f1. Signed-off-by: Slawomir Stepien <[email protected]> vchiq: Upate to match get_user_pages prototype vchiq_arm: Add completion records under the mutex An issue was observed when flushing openmax components which generate a large number of messages returning buffers to host. We occasionally found a duplicate message from 16 messages prior, resulting in a buffer returned twice. While only one thread adds completions, without the mutex you don't get the protection of the automatic memory barrier you get with synchronisation objects. Signed-off-by: Phil Elwell <[email protected]>

Signed-off-by: popcornmix <[email protected]> vchiq: create_pagelist copes with vmalloc memory Signed-off-by: Daniel Stone <[email protected]> vchiq: fix the shim message release Signed-off-by: Daniel Stone <[email protected]> vchiq: export additional symbols Signed-off-by: Daniel Stone <[email protected]> VCHIQ: Make service closure fully synchronous (drv) This is one half of a two-part patch, the other half of which is to the vchiq_lib user library. With these patches, calls to vchiq_close_service and vchiq_remove_service won't return until any associated callbacks have been delivered to the callback thread. VCHIQ: Add per-service tracing The new service option VCHIQ_SERVICE_OPTION_TRACE is a boolean that toggles tracing for the specified service. This commit also introduces vchi_service_set_option and the associated option VCHI_SERVICE_OPTION_TRACE. vchiq: Make the synchronous-CLOSE logic more tolerant vchiq: Move logging control into debugfs vchiq: Take care of a corner case tickled by VCSM Closing a connection that isn't fully open requires care, since one side does not know the other side's port number. Code was present to handle the case where a CLOSE is sent immediately after an OPEN, i.e. before the OPENACK has been received, but this was incorrectly being used when an OPEN from a client using port 0 was rejected. (In the observed failure, the host was attempting to use the VCSM service, which isn't present in the 'cutdown' firmware. The failure was intermittent because sometimes the keepalive service would grab port 0.) This case can be distinguished because the client's remoteport will still be VCHIQ_PORT_FREE, and the srvstate will be OPENING. Either condition is sufficient to differentiate it from the special case described above. vchiq: Avoid high load when blocked and unkillable vchiq: Include SIGSTOP and SIGCONT in list of signals not-masked by vchiq to allow gdb to work vchiq_arm: Complete support for SYNCHRONOUS mode vchiq: Remove inline from suspend/resume vchiq: Allocation does not need to be atomic vchiq: Fix wrong condition check The log level is checked from within the log call. Remove the check in the call. Signed-off-by: Pranith Kumar <[email protected]> BCM270x: Add vchiq device to platform file and Device Tree Prepare to turn the vchiq module into a driver. Signed-off-by: Noralf Trønnes <[email protected]> bcm2708: vchiq: Add Device Tree support Turn vchiq into a driver and stop hardcoding resources. Use devm_* functions in probe path to simplify cleanup. A global variable is used to hold the register address. This is done to keep this patch as small as possible. Also make available on ARCH_BCM2835. Based on work by Lubomir Rintel. Signed-off-by: Noralf Trønnes <[email protected]> vchiq: Change logging level for inbound data vchiq_arm: Two cacheing fixes 1) Make fragment size vary with cache line size Without this patch, non-cache-line-aligned transfers may corrupt (or be corrupted by) adjacent data structures. Both ARM and VC need to be updated to enable this feature. This is ensured by having the loader apply a new DT parameter - cache-line-size. The existence of this parameter guarantees that the kernel is capable, and the parameter will only be modified from the safe default if the loader is capable. 2) Flush/invalidate vmalloc'd memory, and invalidate after reads vchiq: fix NULL pointer dereference when closing driver The following code run as root will cause a null pointer dereference oops: int fd = open("/dev/vc-cma", O_RDONLY); if (fd < 0) err(1, "open failed"); (void)close(fd); [ 1704.877721] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 1704.877725] pgd = b899c000 [ 1704.877736] [00000000] *pgd=37fab831, *pte=00000000, *ppte=00000000 [ 1704.877748] Internal error: Oops: 817 [raspberrypi#1] PREEMPT SMP ARM [ 1704.877765] Modules linked in: evdev i2c_bcm2708 uio_pdrv_genirq uio [ 1704.877774] CPU: 2 PID: 3656 Comm: stress-ng-fstat Not tainted 3.19.1-12-generic-bcm2709 raspberrypi#12-Ubuntu [ 1704.877777] Hardware name: BCM2709 [ 1704.877783] task: b8ab9b00 ti: b7e68000 task.ti: b7e68000 [ 1704.877798] PC is at __down_interruptible+0x50/0xec [ 1704.877806] LR is at down_interruptible+0x5c/0x68 [ 1704.877813] pc : [<80630ee8>] lr : [<800704b0>] psr: 60080093 sp : b7e69e50 ip : b7e69e88 fp : b7e69e84 [ 1704.877817] r10: b88123c8 r9 : 00000010 r8 : 00000001 [ 1704.877822] r7 : b8ab9b00 r6 : 7fffffff r5 : 80a1cc34 r4 : 80a1cc34 [ 1704.877826] r3 : b7e69e50 r2 : 00000000 r1 : 00000000 r0 : 80a1cc34 [ 1704.877833] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1704.877838] Control: 10c5387d Table: 3899c06a DAC: 00000015 [ 1704.877843] Process do-oops (pid: 3656, stack limit = 0xb7e68238) [ 1704.877848] Stack: (0xb7e69e50 to 0xb7e6a000) [ 1704.877856] 9e40: 80a1cc3c 00000000 00000010 b88123c8 [ 1704.877865] 9e60: b7e69e84 80a1cc34 fff9fee9 ffffffff b7e68000 00000009 b7e69ea4 b7e69e88 [ 1704.877874] 9e80: 800704b0 80630ea4 fff9fee9 60080013 80a1cc28 fff9fee9 b7e69edc b7e69ea8 [ 1704.877884] 9ea0: 8040f558 80070460 fff9fee9 ffffffff 00000000 00000000 00000009 80a1cb7c [ 1704.877893] 9ec0: 00000000 80a1cb7c 00000000 00000010 b7e69ef4 b7e69ee0 803e1ba4 8040f514 [ 1704.877902] 9ee0: 00000e48 80a1cb7c b7e69f14 b7e69ef8 803e1c9c 803e1b74 b88123c0 b92acb18 [ 1704.877911] 9f00: b8812790 b8d815d8 b7e69f24 b7e69f18 803e2250 803e1bc8 b7e69f5c b7e69f28 [ 1704.877921] 9f20: 80167bac 803e222c 00000000 00000000 b7e69f54 b8ab9ffc 00000000 8098c794 [ 1704.877930] 9f40: b8ab9b00 8000efc4 b7e68000 00000000 b7e69f6c b7e69f60 80167d6c 80167b28 [ 1704.877939] 9f60: b7e69f8c b7e69f70 80047d38 80167d60 b7e68000 b7e68010 8000efc4 b7e69fb0 [ 1704.877949] 9f80: b7e69fac b7e69f90 80012820 80047c84 01155490 011549a8 00000001 00000006 [ 1704.877957] 9fa0: 00000000 b7e69fb0 8000ee5c 80012790 00000000 353d8c0f 7efc4308 00000000 [ 1704.877966] 9fc0: 01155490 011549a8 00000001 00000006 00000000 00000000 76cf3ba0 00000003 [ 1704.877975] 9fe0: 00000000 7efc42e4 0002272f 76e2ed66 60080030 00000003 00000000 00000000 [ 1704.877998] [<80630ee8>] (__down_interruptible) from [<800704b0>] (down_interruptible+0x5c/0x68) [ 1704.878015] [<800704b0>] (down_interruptible) from [<8040f558>] (vchiu_queue_push+0x50/0xd8) [ 1704.878032] [<8040f558>] (vchiu_queue_push) from [<803e1ba4>] (send_worker_msg+0x3c/0x54) [ 1704.878045] [<803e1ba4>] (send_worker_msg) from [<803e1c9c>] (vc_cma_set_reserve+0xe0/0x1c4) [ 1704.878057] [<803e1c9c>] (vc_cma_set_reserve) from [<803e2250>] (vc_cma_release+0x30/0x38) [ 1704.878069] [<803e2250>] (vc_cma_release) from [<80167bac>] (__fput+0x90/0x1e0) [ 1704.878082] [<80167bac>] (__fput) from [<80167d6c>] (____fput+0x18/0x1c) [ 1704.878094] [<80167d6c>] (____fput) from [<80047d38>] (task_work_run+0xc0/0xf8) [ 1704.878109] [<80047d38>] (task_work_run) from [<80012820>] (do_work_pending+0x9c/0xc4) [ 1704.878123] [<80012820>] (do_work_pending) from [<8000ee5c>] (work_pending+0xc/0x20) [ 1704.878133] Code: e50b1034 e3a01000 e50b2030 e580300c (e5823000) ..the fix is to ensure that we have actually initialized the queue before we attempt to push any items onto it. This occurs if we do an open() followed by a close() without any activity in between. Signed-off-by: Colin Ian King <[email protected]> vchiq_arm: Sort out the vmalloc case See: raspberrypi#1055 vchiq: hack: Add include depecated dma include file

Signed-off-by: popcornmix <[email protected]> vchiq: create_pagelist copes with vmalloc memory Signed-off-by: Daniel Stone <[email protected]> vchiq: fix the shim message release Signed-off-by: Daniel Stone <[email protected]> vchiq: export additional symbols Signed-off-by: Daniel Stone <[email protected]> VCHIQ: Make service closure fully synchronous (drv) This is one half of a two-part patch, the other half of which is to the vchiq_lib user library. With these patches, calls to vchiq_close_service and vchiq_remove_service won't return until any associated callbacks have been delivered to the callback thread. VCHIQ: Add per-service tracing The new service option VCHIQ_SERVICE_OPTION_TRACE is a boolean that toggles tracing for the specified service. This commit also introduces vchi_service_set_option and the associated option VCHI_SERVICE_OPTION_TRACE. vchiq: Make the synchronous-CLOSE logic more tolerant vchiq: Move logging control into debugfs vchiq: Take care of a corner case tickled by VCSM Closing a connection that isn't fully open requires care, since one side does not know the other side's port number. Code was present to handle the case where a CLOSE is sent immediately after an OPEN, i.e. before the OPENACK has been received, but this was incorrectly being used when an OPEN from a client using port 0 was rejected. (In the observed failure, the host was attempting to use the VCSM service, which isn't present in the 'cutdown' firmware. The failure was intermittent because sometimes the keepalive service would grab port 0.) This case can be distinguished because the client's remoteport will still be VCHIQ_PORT_FREE, and the srvstate will be OPENING. Either condition is sufficient to differentiate it from the special case described above. vchiq: Avoid high load when blocked and unkillable vchiq: Include SIGSTOP and SIGCONT in list of signals not-masked by vchiq to allow gdb to work vchiq_arm: Complete support for SYNCHRONOUS mode vchiq: Remove inline from suspend/resume vchiq: Allocation does not need to be atomic vchiq: Fix wrong condition check The log level is checked from within the log call. Remove the check in the call. Signed-off-by: Pranith Kumar <[email protected]> BCM270x: Add vchiq device to platform file and Device Tree Prepare to turn the vchiq module into a driver. Signed-off-by: Noralf Trønnes <[email protected]> bcm2708: vchiq: Add Device Tree support Turn vchiq into a driver and stop hardcoding resources. Use devm_* functions in probe path to simplify cleanup. A global variable is used to hold the register address. This is done to keep this patch as small as possible. Also make available on ARCH_BCM2835. Based on work by Lubomir Rintel. Signed-off-by: Noralf Trønnes <[email protected]> vchiq: Change logging level for inbound data vchiq_arm: Two cacheing fixes 1) Make fragment size vary with cache line size Without this patch, non-cache-line-aligned transfers may corrupt (or be corrupted by) adjacent data structures. Both ARM and VC need to be updated to enable this feature. This is ensured by having the loader apply a new DT parameter - cache-line-size. The existence of this parameter guarantees that the kernel is capable, and the parameter will only be modified from the safe default if the loader is capable. 2) Flush/invalidate vmalloc'd memory, and invalidate after reads vchiq: fix NULL pointer dereference when closing driver The following code run as root will cause a null pointer dereference oops: int fd = open("/dev/vc-cma", O_RDONLY); if (fd < 0) err(1, "open failed"); (void)close(fd); [ 1704.877721] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 1704.877725] pgd = b899c000 [ 1704.877736] [00000000] *pgd=37fab831, *pte=00000000, *ppte=00000000 [ 1704.877748] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 1704.877765] Modules linked in: evdev i2c_bcm2708 uio_pdrv_genirq uio [ 1704.877774] CPU: 2 PID: 3656 Comm: stress-ng-fstat Not tainted 3.19.1-12-generic-bcm2709 #12-Ubuntu [ 1704.877777] Hardware name: BCM2709 [ 1704.877783] task: b8ab9b00 ti: b7e68000 task.ti: b7e68000 [ 1704.877798] PC is at __down_interruptible+0x50/0xec [ 1704.877806] LR is at down_interruptible+0x5c/0x68 [ 1704.877813] pc : [<80630ee8>] lr : [<800704b0>] psr: 60080093 sp : b7e69e50 ip : b7e69e88 fp : b7e69e84 [ 1704.877817] r10: b88123c8 r9 : 00000010 r8 : 00000001 [ 1704.877822] r7 : b8ab9b00 r6 : 7fffffff r5 : 80a1cc34 r4 : 80a1cc34 [ 1704.877826] r3 : b7e69e50 r2 : 00000000 r1 : 00000000 r0 : 80a1cc34 [ 1704.877833] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1704.877838] Control: 10c5387d Table: 3899c06a DAC: 00000015 [ 1704.877843] Process do-oops (pid: 3656, stack limit = 0xb7e68238) [ 1704.877848] Stack: (0xb7e69e50 to 0xb7e6a000) [ 1704.877856] 9e40: 80a1cc3c 00000000 00000010 b88123c8 [ 1704.877865] 9e60: b7e69e84 80a1cc34 fff9fee9 ffffffff b7e68000 00000009 b7e69ea4 b7e69e88 [ 1704.877874] 9e80: 800704b0 80630ea4 fff9fee9 60080013 80a1cc28 fff9fee9 b7e69edc b7e69ea8 [ 1704.877884] 9ea0: 8040f558 80070460 fff9fee9 ffffffff 00000000 00000000 00000009 80a1cb7c [ 1704.877893] 9ec0: 00000000 80a1cb7c 00000000 00000010 b7e69ef4 b7e69ee0 803e1ba4 8040f514 [ 1704.877902] 9ee0: 00000e48 80a1cb7c b7e69f14 b7e69ef8 803e1c9c 803e1b74 b88123c0 b92acb18 [ 1704.877911] 9f00: b8812790 b8d815d8 b7e69f24 b7e69f18 803e2250 803e1bc8 b7e69f5c b7e69f28 [ 1704.877921] 9f20: 80167bac 803e222c 00000000 00000000 b7e69f54 b8ab9ffc 00000000 8098c794 [ 1704.877930] 9f40: b8ab9b00 8000efc4 b7e68000 00000000 b7e69f6c b7e69f60 80167d6c 80167b28 [ 1704.877939] 9f60: b7e69f8c b7e69f70 80047d38 80167d60 b7e68000 b7e68010 8000efc4 b7e69fb0 [ 1704.877949] 9f80: b7e69fac b7e69f90 80012820 80047c84 01155490 011549a8 00000001 00000006 [ 1704.877957] 9fa0: 00000000 b7e69fb0 8000ee5c 80012790 00000000 353d8c0f 7efc4308 00000000 [ 1704.877966] 9fc0: 01155490 011549a8 00000001 00000006 00000000 00000000 76cf3ba0 00000003 [ 1704.877975] 9fe0: 00000000 7efc42e4 0002272f 76e2ed66 60080030 00000003 00000000 00000000 [ 1704.877998] [<80630ee8>] (__down_interruptible) from [<800704b0>] (down_interruptible+0x5c/0x68) [ 1704.878015] [<800704b0>] (down_interruptible) from [<8040f558>] (vchiu_queue_push+0x50/0xd8) [ 1704.878032] [<8040f558>] (vchiu_queue_push) from [<803e1ba4>] (send_worker_msg+0x3c/0x54) [ 1704.878045] [<803e1ba4>] (send_worker_msg) from [<803e1c9c>] (vc_cma_set_reserve+0xe0/0x1c4) [ 1704.878057] [<803e1c9c>] (vc_cma_set_reserve) from [<803e2250>] (vc_cma_release+0x30/0x38) [ 1704.878069] [<803e2250>] (vc_cma_release) from [<80167bac>] (__fput+0x90/0x1e0) [ 1704.878082] [<80167bac>] (__fput) from [<80167d6c>] (____fput+0x18/0x1c) [ 1704.878094] [<80167d6c>] (____fput) from [<80047d38>] (task_work_run+0xc0/0xf8) [ 1704.878109] [<80047d38>] (task_work_run) from [<80012820>] (do_work_pending+0x9c/0xc4) [ 1704.878123] [<80012820>] (do_work_pending) from [<8000ee5c>] (work_pending+0xc/0x20) [ 1704.878133] Code: e50b1034 e3a01000 e50b2030 e580300c (e5823000) ..the fix is to ensure that we have actually initialized the queue before we attempt to push any items onto it. This occurs if we do an open() followed by a close() without any activity in between. Signed-off-by: Colin Ian King <[email protected]> vchiq_arm: Sort out the vmalloc case See: #1055 vchiq: hack: Add include depecated dma include file vchiq_arm: Tweak the logging output Signed-off-by: Phil Elwell <[email protected]> vchiq_arm: Access the dequeue_pending flag locked Reading through this code looking for another problem (now found in userland) the use of dequeue_pending outside a lock didn't seem safe. Signed-off-by: Phil Elwell <[email protected]> vchiq_arm: Service callbacks must not fail Service callbacks are not allowed to return an error. The internal callback that delivers events and messages to user tasks does not enqueue them if the service is closing, but this is not an error and should not be reported as such. Signed-off-by: Phil Elwell <[email protected]> vchiq_arm: do not use page_cache_release(page) macro (#1403) This macro is gone since 1fa64f1. Signed-off-by: Slawomir Stepien <[email protected]> vchiq: Upate to match get_user_pages prototype vchiq_arm: Add completion records under the mutex An issue was observed when flushing openmax components which generate a large number of messages returning buffers to host. We occasionally found a duplicate message from 16 messages prior, resulting in a buffer returned twice. While only one thread adds completions, without the mutex you don't get the protection of the automatic memory barrier you get with synchronisation objects. Signed-off-by: Phil Elwell <[email protected]>

Signed-off-by: popcornmix <[email protected]> vchiq: create_pagelist copes with vmalloc memory Signed-off-by: Daniel Stone <[email protected]> vchiq: fix the shim message release Signed-off-by: Daniel Stone <[email protected]> vchiq: export additional symbols Signed-off-by: Daniel Stone <[email protected]> VCHIQ: Make service closure fully synchronous (drv) This is one half of a two-part patch, the other half of which is to the vchiq_lib user library. With these patches, calls to vchiq_close_service and vchiq_remove_service won't return until any associated callbacks have been delivered to the callback thread. VCHIQ: Add per-service tracing The new service option VCHIQ_SERVICE_OPTION_TRACE is a boolean that toggles tracing for the specified service. This commit also introduces vchi_service_set_option and the associated option VCHI_SERVICE_OPTION_TRACE. vchiq: Make the synchronous-CLOSE logic more tolerant vchiq: Move logging control into debugfs vchiq: Take care of a corner case tickled by VCSM Closing a connection that isn't fully open requires care, since one side does not know the other side's port number. Code was present to handle the case where a CLOSE is sent immediately after an OPEN, i.e. before the OPENACK has been received, but this was incorrectly being used when an OPEN from a client using port 0 was rejected. (In the observed failure, the host was attempting to use the VCSM service, which isn't present in the 'cutdown' firmware. The failure was intermittent because sometimes the keepalive service would grab port 0.) This case can be distinguished because the client's remoteport will still be VCHIQ_PORT_FREE, and the srvstate will be OPENING. Either condition is sufficient to differentiate it from the special case described above. vchiq: Avoid high load when blocked and unkillable vchiq: Include SIGSTOP and SIGCONT in list of signals not-masked by vchiq to allow gdb to work vchiq_arm: Complete support for SYNCHRONOUS mode vchiq: Remove inline from suspend/resume vchiq: Allocation does not need to be atomic vchiq: Fix wrong condition check The log level is checked from within the log call. Remove the check in the call. Signed-off-by: Pranith Kumar <[email protected]> BCM270x: Add vchiq device to platform file and Device Tree Prepare to turn the vchiq module into a driver. Signed-off-by: Noralf Trønnes <[email protected]> bcm2708: vchiq: Add Device Tree support Turn vchiq into a driver and stop hardcoding resources. Use devm_* functions in probe path to simplify cleanup. A global variable is used to hold the register address. This is done to keep this patch as small as possible. Also make available on ARCH_BCM2835. Based on work by Lubomir Rintel. Signed-off-by: Noralf Trønnes <[email protected]> vchiq: Change logging level for inbound data vchiq_arm: Two cacheing fixes 1) Make fragment size vary with cache line size Without this patch, non-cache-line-aligned transfers may corrupt (or be corrupted by) adjacent data structures. Both ARM and VC need to be updated to enable this feature. This is ensured by having the loader apply a new DT parameter - cache-line-size. The existence of this parameter guarantees that the kernel is capable, and the parameter will only be modified from the safe default if the loader is capable. 2) Flush/invalidate vmalloc'd memory, and invalidate after reads vchiq: fix NULL pointer dereference when closing driver The following code run as root will cause a null pointer dereference oops: int fd = open("/dev/vc-cma", O_RDONLY); if (fd < 0) err(1, "open failed"); (void)close(fd); [ 1704.877721] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 1704.877725] pgd = b899c000 [ 1704.877736] [00000000] *pgd=37fab831, *pte=00000000, *ppte=00000000 [ 1704.877748] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 1704.877765] Modules linked in: evdev i2c_bcm2708 uio_pdrv_genirq uio [ 1704.877774] CPU: 2 PID: 3656 Comm: stress-ng-fstat Not tainted 3.19.1-12-generic-bcm2709 #12-Ubuntu [ 1704.877777] Hardware name: BCM2709 [ 1704.877783] task: b8ab9b00 ti: b7e68000 task.ti: b7e68000 [ 1704.877798] PC is at __down_interruptible+0x50/0xec [ 1704.877806] LR is at down_interruptible+0x5c/0x68 [ 1704.877813] pc : [<80630ee8>] lr : [<800704b0>] psr: 60080093 sp : b7e69e50 ip : b7e69e88 fp : b7e69e84 [ 1704.877817] r10: b88123c8 r9 : 00000010 r8 : 00000001 [ 1704.877822] r7 : b8ab9b00 r6 : 7fffffff r5 : 80a1cc34 r4 : 80a1cc34 [ 1704.877826] r3 : b7e69e50 r2 : 00000000 r1 : 00000000 r0 : 80a1cc34 [ 1704.877833] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1704.877838] Control: 10c5387d Table: 3899c06a DAC: 00000015 [ 1704.877843] Process do-oops (pid: 3656, stack limit = 0xb7e68238) [ 1704.877848] Stack: (0xb7e69e50 to 0xb7e6a000) [ 1704.877856] 9e40: 80a1cc3c 00000000 00000010 b88123c8 [ 1704.877865] 9e60: b7e69e84 80a1cc34 fff9fee9 ffffffff b7e68000 00000009 b7e69ea4 b7e69e88 [ 1704.877874] 9e80: 800704b0 80630ea4 fff9fee9 60080013 80a1cc28 fff9fee9 b7e69edc b7e69ea8 [ 1704.877884] 9ea0: 8040f558 80070460 fff9fee9 ffffffff 00000000 00000000 00000009 80a1cb7c [ 1704.877893] 9ec0: 00000000 80a1cb7c 00000000 00000010 b7e69ef4 b7e69ee0 803e1ba4 8040f514 [ 1704.877902] 9ee0: 00000e48 80a1cb7c b7e69f14 b7e69ef8 803e1c9c 803e1b74 b88123c0 b92acb18 [ 1704.877911] 9f00: b8812790 b8d815d8 b7e69f24 b7e69f18 803e2250 803e1bc8 b7e69f5c b7e69f28 [ 1704.877921] 9f20: 80167bac 803e222c 00000000 00000000 b7e69f54 b8ab9ffc 00000000 8098c794 [ 1704.877930] 9f40: b8ab9b00 8000efc4 b7e68000 00000000 b7e69f6c b7e69f60 80167d6c 80167b28 [ 1704.877939] 9f60: b7e69f8c b7e69f70 80047d38 80167d60 b7e68000 b7e68010 8000efc4 b7e69fb0 [ 1704.877949] 9f80: b7e69fac b7e69f90 80012820 80047c84 01155490 011549a8 00000001 00000006 [ 1704.877957] 9fa0: 00000000 b7e69fb0 8000ee5c 80012790 00000000 353d8c0f 7efc4308 00000000 [ 1704.877966] 9fc0: 01155490 011549a8 00000001 00000006 00000000 00000000 76cf3ba0 00000003 [ 1704.877975] 9fe0: 00000000 7efc42e4 0002272f 76e2ed66 60080030 00000003 00000000 00000000 [ 1704.877998] [<80630ee8>] (__down_interruptible) from [<800704b0>] (down_interruptible+0x5c/0x68) [ 1704.878015] [<800704b0>] (down_interruptible) from [<8040f558>] (vchiu_queue_push+0x50/0xd8) [ 1704.878032] [<8040f558>] (vchiu_queue_push) from [<803e1ba4>] (send_worker_msg+0x3c/0x54) [ 1704.878045] [<803e1ba4>] (send_worker_msg) from [<803e1c9c>] (vc_cma_set_reserve+0xe0/0x1c4) [ 1704.878057] [<803e1c9c>] (vc_cma_set_reserve) from [<803e2250>] (vc_cma_release+0x30/0x38) [ 1704.878069] [<803e2250>] (vc_cma_release) from [<80167bac>] (__fput+0x90/0x1e0) [ 1704.878082] [<80167bac>] (__fput) from [<80167d6c>] (____fput+0x18/0x1c) [ 1704.878094] [<80167d6c>] (____fput) from [<80047d38>] (task_work_run+0xc0/0xf8) [ 1704.878109] [<80047d38>] (task_work_run) from [<80012820>] (do_work_pending+0x9c/0xc4) [ 1704.878123] [<80012820>] (do_work_pending) from [<8000ee5c>] (work_pending+0xc/0x20) [ 1704.878133] Code: e50b1034 e3a01000 e50b2030 e580300c (e5823000) ..the fix is to ensure that we have actually initialized the queue before we attempt to push any items onto it. This occurs if we do an open() followed by a close() without any activity in between. Signed-off-by: Colin Ian King <[email protected]> vchiq_arm: Sort out the vmalloc case See: raspberrypi/linux#1055 vchiq: hack: Add include depecated dma include file

Signed-off-by: popcornmix <[email protected]> vchiq: create_pagelist copes with vmalloc memory Signed-off-by: Daniel Stone <[email protected]> vchiq: fix the shim message release Signed-off-by: Daniel Stone <[email protected]> vchiq: export additional symbols Signed-off-by: Daniel Stone <[email protected]> VCHIQ: Make service closure fully synchronous (drv) This is one half of a two-part patch, the other half of which is to the vchiq_lib user library. With these patches, calls to vchiq_close_service and vchiq_remove_service won't return until any associated callbacks have been delivered to the callback thread. VCHIQ: Add per-service tracing The new service option VCHIQ_SERVICE_OPTION_TRACE is a boolean that toggles tracing for the specified service. This commit also introduces vchi_service_set_option and the associated option VCHI_SERVICE_OPTION_TRACE. vchiq: Make the synchronous-CLOSE logic more tolerant vchiq: Move logging control into debugfs vchiq: Take care of a corner case tickled by VCSM Closing a connection that isn't fully open requires care, since one side does not know the other side's port number. Code was present to handle the case where a CLOSE is sent immediately after an OPEN, i.e. before the OPENACK has been received, but this was incorrectly being used when an OPEN from a client using port 0 was rejected. (In the observed failure, the host was attempting to use the VCSM service, which isn't present in the 'cutdown' firmware. The failure was intermittent because sometimes the keepalive service would grab port 0.) This case can be distinguished because the client's remoteport will still be VCHIQ_PORT_FREE, and the srvstate will be OPENING. Either condition is sufficient to differentiate it from the special case described above. vchiq: Avoid high load when blocked and unkillable vchiq: Include SIGSTOP and SIGCONT in list of signals not-masked by vchiq to allow gdb to work vchiq_arm: Complete support for SYNCHRONOUS mode vchiq: Remove inline from suspend/resume vchiq: Allocation does not need to be atomic vchiq: Fix wrong condition check The log level is checked from within the log call. Remove the check in the call. Signed-off-by: Pranith Kumar <[email protected]> BCM270x: Add vchiq device to platform file and Device Tree Prepare to turn the vchiq module into a driver. Signed-off-by: Noralf Trønnes <[email protected]> bcm2708: vchiq: Add Device Tree support Turn vchiq into a driver and stop hardcoding resources. Use devm_* functions in probe path to simplify cleanup. A global variable is used to hold the register address. This is done to keep this patch as small as possible. Also make available on ARCH_BCM2835. Based on work by Lubomir Rintel. Signed-off-by: Noralf Trønnes <[email protected]> vchiq: Change logging level for inbound data vchiq_arm: Two cacheing fixes 1) Make fragment size vary with cache line size Without this patch, non-cache-line-aligned transfers may corrupt (or be corrupted by) adjacent data structures. Both ARM and VC need to be updated to enable this feature. This is ensured by having the loader apply a new DT parameter - cache-line-size. The existence of this parameter guarantees that the kernel is capable, and the parameter will only be modified from the safe default if the loader is capable. 2) Flush/invalidate vmalloc'd memory, and invalidate after reads vchiq: fix NULL pointer dereference when closing driver The following code run as root will cause a null pointer dereference oops: int fd = open("/dev/vc-cma", O_RDONLY); if (fd < 0) err(1, "open failed"); (void)close(fd); [ 1704.877721] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 1704.877725] pgd = b899c000 [ 1704.877736] [00000000] *pgd=37fab831, *pte=00000000, *ppte=00000000 [ 1704.877748] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 1704.877765] Modules linked in: evdev i2c_bcm2708 uio_pdrv_genirq uio [ 1704.877774] CPU: 2 PID: 3656 Comm: stress-ng-fstat Not tainted 3.19.1-12-generic-bcm2709 #12-Ubuntu [ 1704.877777] Hardware name: BCM2709 [ 1704.877783] task: b8ab9b00 ti: b7e68000 task.ti: b7e68000 [ 1704.877798] PC is at __down_interruptible+0x50/0xec [ 1704.877806] LR is at down_interruptible+0x5c/0x68 [ 1704.877813] pc : [<80630ee8>] lr : [<800704b0>] psr: 60080093 sp : b7e69e50 ip : b7e69e88 fp : b7e69e84 [ 1704.877817] r10: b88123c8 r9 : 00000010 r8 : 00000001 [ 1704.877822] r7 : b8ab9b00 r6 : 7fffffff r5 : 80a1cc34 r4 : 80a1cc34 [ 1704.877826] r3 : b7e69e50 r2 : 00000000 r1 : 00000000 r0 : 80a1cc34 [ 1704.877833] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1704.877838] Control: 10c5387d Table: 3899c06a DAC: 00000015 [ 1704.877843] Process do-oops (pid: 3656, stack limit = 0xb7e68238) [ 1704.877848] Stack: (0xb7e69e50 to 0xb7e6a000) [ 1704.877856] 9e40: 80a1cc3c 00000000 00000010 b88123c8 [ 1704.877865] 9e60: b7e69e84 80a1cc34 fff9fee9 ffffffff b7e68000 00000009 b7e69ea4 b7e69e88 [ 1704.877874] 9e80: 800704b0 80630ea4 fff9fee9 60080013 80a1cc28 fff9fee9 b7e69edc b7e69ea8 [ 1704.877884] 9ea0: 8040f558 80070460 fff9fee9 ffffffff 00000000 00000000 00000009 80a1cb7c [ 1704.877893] 9ec0: 00000000 80a1cb7c 00000000 00000010 b7e69ef4 b7e69ee0 803e1ba4 8040f514 [ 1704.877902] 9ee0: 00000e48 80a1cb7c b7e69f14 b7e69ef8 803e1c9c 803e1b74 b88123c0 b92acb18 [ 1704.877911] 9f00: b8812790 b8d815d8 b7e69f24 b7e69f18 803e2250 803e1bc8 b7e69f5c b7e69f28 [ 1704.877921] 9f20: 80167bac 803e222c 00000000 00000000 b7e69f54 b8ab9ffc 00000000 8098c794 [ 1704.877930] 9f40: b8ab9b00 8000efc4 b7e68000 00000000 b7e69f6c b7e69f60 80167d6c 80167b28 [ 1704.877939] 9f60: b7e69f8c b7e69f70 80047d38 80167d60 b7e68000 b7e68010 8000efc4 b7e69fb0 [ 1704.877949] 9f80: b7e69fac b7e69f90 80012820 80047c84 01155490 011549a8 00000001 00000006 [ 1704.877957] 9fa0: 00000000 b7e69fb0 8000ee5c 80012790 00000000 353d8c0f 7efc4308 00000000 [ 1704.877966] 9fc0: 01155490 011549a8 00000001 00000006 00000000 00000000 76cf3ba0 00000003 [ 1704.877975] 9fe0: 00000000 7efc42e4 0002272f 76e2ed66 60080030 00000003 00000000 00000000 [ 1704.877998] [<80630ee8>] (__down_interruptible) from [<800704b0>] (down_interruptible+0x5c/0x68) [ 1704.878015] [<800704b0>] (down_interruptible) from [<8040f558>] (vchiu_queue_push+0x50/0xd8) [ 1704.878032] [<8040f558>] (vchiu_queue_push) from [<803e1ba4>] (send_worker_msg+0x3c/0x54) [ 1704.878045] [<803e1ba4>] (send_worker_msg) from [<803e1c9c>] (vc_cma_set_reserve+0xe0/0x1c4) [ 1704.878057] [<803e1c9c>] (vc_cma_set_reserve) from [<803e2250>] (vc_cma_release+0x30/0x38) [ 1704.878069] [<803e2250>] (vc_cma_release) from [<80167bac>] (__fput+0x90/0x1e0) [ 1704.878082] [<80167bac>] (__fput) from [<80167d6c>] (____fput+0x18/0x1c) [ 1704.878094] [<80167d6c>] (____fput) from [<80047d38>] (task_work_run+0xc0/0xf8) [ 1704.878109] [<80047d38>] (task_work_run) from [<80012820>] (do_work_pending+0x9c/0xc4) [ 1704.878123] [<80012820>] (do_work_pending) from [<8000ee5c>] (work_pending+0xc/0x20) [ 1704.878133] Code: e50b1034 e3a01000 e50b2030 e580300c (e5823000) ..the fix is to ensure that we have actually initialized the queue before we attempt to push any items onto it. This occurs if we do an open() followed by a close() without any activity in between. Signed-off-by: Colin Ian King <[email protected]> vchiq_arm: Sort out the vmalloc case See: #1055 vchiq: hack: Add include depecated dma include file vchiq_arm: Tweak the logging output Signed-off-by: Phil Elwell <[email protected]> vchiq_arm: Access the dequeue_pending flag locked Reading through this code looking for another problem (now found in userland) the use of dequeue_pending outside a lock didn't seem safe. Signed-off-by: Phil Elwell <[email protected]> vchiq_arm: Service callbacks must not fail Service callbacks are not allowed to return an error. The internal callback that delivers events and messages to user tasks does not enqueue them if the service is closing, but this is not an error and should not be reported as such. Signed-off-by: Phil Elwell <[email protected]> vchiq_arm: do not use page_cache_release(page) macro (#1403) This macro is gone since 1fa64f1. Signed-off-by: Slawomir Stepien <[email protected]> vchiq: Upate to match get_user_pages prototype vchiq_arm: Add completion records under the mutex An issue was observed when flushing openmax components which generate a large number of messages returning buffers to host. We occasionally found a duplicate message from 16 messages prior, resulting in a buffer returned twice. While only one thread adds completions, without the mutex you don't get the protection of the automatic memory barrier you get with synchronisation objects. Signed-off-by: Phil Elwell <[email protected]>

Signed-off-by: popcornmix <[email protected]> vchiq: create_pagelist copes with vmalloc memory Signed-off-by: Daniel Stone <[email protected]> vchiq: fix the shim message release Signed-off-by: Daniel Stone <[email protected]> vchiq: export additional symbols Signed-off-by: Daniel Stone <[email protected]> VCHIQ: Make service closure fully synchronous (drv) This is one half of a two-part patch, the other half of which is to the vchiq_lib user library. With these patches, calls to vchiq_close_service and vchiq_remove_service won't return until any associated callbacks have been delivered to the callback thread. VCHIQ: Add per-service tracing The new service option VCHIQ_SERVICE_OPTION_TRACE is a boolean that toggles tracing for the specified service. This commit also introduces vchi_service_set_option and the associated option VCHI_SERVICE_OPTION_TRACE. vchiq: Make the synchronous-CLOSE logic more tolerant vchiq: Move logging control into debugfs vchiq: Take care of a corner case tickled by VCSM Closing a connection that isn't fully open requires care, since one side does not know the other side's port number. Code was present to handle the case where a CLOSE is sent immediately after an OPEN, i.e. before the OPENACK has been received, but this was incorrectly being used when an OPEN from a client using port 0 was rejected. (In the observed failure, the host was attempting to use the VCSM service, which isn't present in the 'cutdown' firmware. The failure was intermittent because sometimes the keepalive service would grab port 0.) This case can be distinguished because the client's remoteport will still be VCHIQ_PORT_FREE, and the srvstate will be OPENING. Either condition is sufficient to differentiate it from the special case described above. vchiq: Avoid high load when blocked and unkillable vchiq: Include SIGSTOP and SIGCONT in list of signals not-masked by vchiq to allow gdb to work vchiq_arm: Complete support for SYNCHRONOUS mode vchiq: Remove inline from suspend/resume vchiq: Allocation does not need to be atomic vchiq: Fix wrong condition check The log level is checked from within the log call. Remove the check in the call. Signed-off-by: Pranith Kumar <[email protected]> BCM270x: Add vchiq device to platform file and Device Tree Prepare to turn the vchiq module into a driver. Signed-off-by: Noralf Trønnes <[email protected]> bcm2708: vchiq: Add Device Tree support Turn vchiq into a driver and stop hardcoding resources. Use devm_* functions in probe path to simplify cleanup. A global variable is used to hold the register address. This is done to keep this patch as small as possible. Also make available on ARCH_BCM2835. Based on work by Lubomir Rintel. Signed-off-by: Noralf Trønnes <[email protected]> vchiq: Change logging level for inbound data vchiq_arm: Two cacheing fixes 1) Make fragment size vary with cache line size Without this patch, non-cache-line-aligned transfers may corrupt (or be corrupted by) adjacent data structures. Both ARM and VC need to be updated to enable this feature. This is ensured by having the loader apply a new DT parameter - cache-line-size. The existence of this parameter guarantees that the kernel is capable, and the parameter will only be modified from the safe default if the loader is capable. 2) Flush/invalidate vmalloc'd memory, and invalidate after reads vchiq: fix NULL pointer dereference when closing driver The following code run as root will cause a null pointer dereference oops: int fd = open("/dev/vc-cma", O_RDONLY); if (fd < 0) err(1, "open failed"); (void)close(fd); [ 1704.877721] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 1704.877725] pgd = b899c000 [ 1704.877736] [00000000] *pgd=37fab831, *pte=00000000, *ppte=00000000 [ 1704.877748] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 1704.877765] Modules linked in: evdev i2c_bcm2708 uio_pdrv_genirq uio [ 1704.877774] CPU: 2 PID: 3656 Comm: stress-ng-fstat Not tainted 3.19.1-12-generic-bcm2709 #12-Ubuntu [ 1704.877777] Hardware name: BCM2709 [ 1704.877783] task: b8ab9b00 ti: b7e68000 task.ti: b7e68000 [ 1704.877798] PC is at __down_interruptible+0x50/0xec [ 1704.877806] LR is at down_interruptible+0x5c/0x68 [ 1704.877813] pc : [<80630ee8>] lr : [<800704b0>] psr: 60080093 sp : b7e69e50 ip : b7e69e88 fp : b7e69e84 [ 1704.877817] r10: b88123c8 r9 : 00000010 r8 : 00000001 [ 1704.877822] r7 : b8ab9b00 r6 : 7fffffff r5 : 80a1cc34 r4 : 80a1cc34 [ 1704.877826] r3 : b7e69e50 r2 : 00000000 r1 : 00000000 r0 : 80a1cc34 [ 1704.877833] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1704.877838] Control: 10c5387d Table: 3899c06a DAC: 00000015 [ 1704.877843] Process do-oops (pid: 3656, stack limit = 0xb7e68238) [ 1704.877848] Stack: (0xb7e69e50 to 0xb7e6a000) [ 1704.877856] 9e40: 80a1cc3c 00000000 00000010 b88123c8 [ 1704.877865] 9e60: b7e69e84 80a1cc34 fff9fee9 ffffffff b7e68000 00000009 b7e69ea4 b7e69e88 [ 1704.877874] 9e80: 800704b0 80630ea4 fff9fee9 60080013 80a1cc28 fff9fee9 b7e69edc b7e69ea8 [ 1704.877884] 9ea0: 8040f558 80070460 fff9fee9 ffffffff 00000000 00000000 00000009 80a1cb7c [ 1704.877893] 9ec0: 00000000 80a1cb7c 00000000 00000010 b7e69ef4 b7e69ee0 803e1ba4 8040f514 [ 1704.877902] 9ee0: 00000e48 80a1cb7c b7e69f14 b7e69ef8 803e1c9c 803e1b74 b88123c0 b92acb18 [ 1704.877911] 9f00: b8812790 b8d815d8 b7e69f24 b7e69f18 803e2250 803e1bc8 b7e69f5c b7e69f28 [ 1704.877921] 9f20: 80167bac 803e222c 00000000 00000000 b7e69f54 b8ab9ffc 00000000 8098c794 [ 1704.877930] 9f40: b8ab9b00 8000efc4 b7e68000 00000000 b7e69f6c b7e69f60 80167d6c 80167b28 [ 1704.877939] 9f60: b7e69f8c b7e69f70 80047d38 80167d60 b7e68000 b7e68010 8000efc4 b7e69fb0 [ 1704.877949] 9f80: b7e69fac b7e69f90 80012820 80047c84 01155490 011549a8 00000001 00000006 [ 1704.877957] 9fa0: 00000000 b7e69fb0 8000ee5c 80012790 00000000 353d8c0f 7efc4308 00000000 [ 1704.877966] 9fc0: 01155490 011549a8 00000001 00000006 00000000 00000000 76cf3ba0 00000003 [ 1704.877975] 9fe0: 00000000 7efc42e4 0002272f 76e2ed66 60080030 00000003 00000000 00000000 [ 1704.877998] [<80630ee8>] (__down_interruptible) from [<800704b0>] (down_interruptible+0x5c/0x68) [ 1704.878015] [<800704b0>] (down_interruptible) from [<8040f558>] (vchiu_queue_push+0x50/0xd8) [ 1704.878032] [<8040f558>] (vchiu_queue_push) from [<803e1ba4>] (send_worker_msg+0x3c/0x54) [ 1704.878045] [<803e1ba4>] (send_worker_msg) from [<803e1c9c>] (vc_cma_set_reserve+0xe0/0x1c4) [ 1704.878057] [<803e1c9c>] (vc_cma_set_reserve) from [<803e2250>] (vc_cma_release+0x30/0x38) [ 1704.878069] [<803e2250>] (vc_cma_release) from [<80167bac>] (__fput+0x90/0x1e0) [ 1704.878082] [<80167bac>] (__fput) from [<80167d6c>] (____fput+0x18/0x1c) [ 1704.878094] [<80167d6c>] (____fput) from [<80047d38>] (task_work_run+0xc0/0xf8) [ 1704.878109] [<80047d38>] (task_work_run) from [<80012820>] (do_work_pending+0x9c/0xc4) [ 1704.878123] [<80012820>] (do_work_pending) from [<8000ee5c>] (work_pending+0xc/0x20) [ 1704.878133] Code: e50b1034 e3a01000 e50b2030 e580300c (e5823000) ..the fix is to ensure that we have actually initialized the queue before we attempt to push any items onto it. This occurs if we do an open() followed by a close() without any activity in between. Signed-off-by: Colin Ian King <[email protected]> vchiq_arm: Sort out the vmalloc case See: raspberrypi/linux#1055 vchiq: hack: Add include depecated dma include file vchiq_arm: Tweak the logging output Signed-off-by: Phil Elwell <[email protected]> vchiq_arm: Access the dequeue_pending flag locked Reading through this code looking for another problem (now found in userland) the use of dequeue_pending outside a lock didn't seem safe. Signed-off-by: Phil Elwell <[email protected]> vchiq_arm: Service callbacks must not fail Service callbacks are not allowed to return an error. The internal callback that delivers events and messages to user tasks does not enqueue them if the service is closing, but this is not an error and should not be reported as such. Signed-off-by: Phil Elwell <[email protected]> vchiq_arm: do not use page_cache_release(page) macro (#1403) This macro is gone since 1fa64f1. Signed-off-by: Slawomir Stepien <[email protected]> vchiq: Upate to match get_user_pages prototype vchiq_arm: Add completion records under the mutex An issue was observed when flushing openmax components which generate a large number of messages returning buffers to host. We occasionally found a duplicate message from 16 messages prior, resulting in a buffer returned twice. While only one thread adds completions, without the mutex you don't get the protection of the automatic memory barrier you get with synchronisation objects. Signed-off-by: Phil Elwell <[email protected]>

Signed-off-by: popcornmix <[email protected]> vchiq: create_pagelist copes with vmalloc memory Signed-off-by: Daniel Stone <[email protected]> vchiq: fix the shim message release Signed-off-by: Daniel Stone <[email protected]> vchiq: export additional symbols Signed-off-by: Daniel Stone <[email protected]> VCHIQ: Make service closure fully synchronous (drv) This is one half of a two-part patch, the other half of which is to the vchiq_lib user library. With these patches, calls to vchiq_close_service and vchiq_remove_service won't return until any associated callbacks have been delivered to the callback thread. VCHIQ: Add per-service tracing The new service option VCHIQ_SERVICE_OPTION_TRACE is a boolean that toggles tracing for the specified service. This commit also introduces vchi_service_set_option and the associated option VCHI_SERVICE_OPTION_TRACE. vchiq: Make the synchronous-CLOSE logic more tolerant vchiq: Move logging control into debugfs vchiq: Take care of a corner case tickled by VCSM Closing a connection that isn't fully open requires care, since one side does not know the other side's port number. Code was present to handle the case where a CLOSE is sent immediately after an OPEN, i.e. before the OPENACK has been received, but this was incorrectly being used when an OPEN from a client using port 0 was rejected. (In the observed failure, the host was attempting to use the VCSM service, which isn't present in the 'cutdown' firmware. The failure was intermittent because sometimes the keepalive service would grab port 0.) This case can be distinguished because the client's remoteport will still be VCHIQ_PORT_FREE, and the srvstate will be OPENING. Either condition is sufficient to differentiate it from the special case described above. vchiq: Avoid high load when blocked and unkillable vchiq: Include SIGSTOP and SIGCONT in list of signals not-masked by vchiq to allow gdb to work vchiq_arm: Complete support for SYNCHRONOUS mode vchiq: Remove inline from suspend/resume vchiq: Allocation does not need to be atomic vchiq: Fix wrong condition check The log level is checked from within the log call. Remove the check in the call. Signed-off-by: Pranith Kumar <[email protected]> BCM270x: Add vchiq device to platform file and Device Tree Prepare to turn the vchiq module into a driver. Signed-off-by: Noralf Trønnes <[email protected]> bcm2708: vchiq: Add Device Tree support Turn vchiq into a driver and stop hardcoding resources. Use devm_* functions in probe path to simplify cleanup. A global variable is used to hold the register address. This is done to keep this patch as small as possible. Also make available on ARCH_BCM2835. Based on work by Lubomir Rintel. Signed-off-by: Noralf Trønnes <[email protected]> vchiq: Change logging level for inbound data vchiq_arm: Two cacheing fixes 1) Make fragment size vary with cache line size Without this patch, non-cache-line-aligned transfers may corrupt (or be corrupted by) adjacent data structures. Both ARM and VC need to be updated to enable this feature. This is ensured by having the loader apply a new DT parameter - cache-line-size. The existence of this parameter guarantees that the kernel is capable, and the parameter will only be modified from the safe default if the loader is capable. 2) Flush/invalidate vmalloc'd memory, and invalidate after reads vchiq: fix NULL pointer dereference when closing driver The following code run as root will cause a null pointer dereference oops: int fd = open("/dev/vc-cma", O_RDONLY); if (fd < 0) err(1, "open failed"); (void)close(fd); [ 1704.877721] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 1704.877725] pgd = b899c000 [ 1704.877736] [00000000] *pgd=37fab831, *pte=00000000, *ppte=00000000 [ 1704.877748] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 1704.877765] Modules linked in: evdev i2c_bcm2708 uio_pdrv_genirq uio [ 1704.877774] CPU: 2 PID: 3656 Comm: stress-ng-fstat Not tainted 3.19.1-12-generic-bcm2709 #12-Ubuntu [ 1704.877777] Hardware name: BCM2709 [ 1704.877783] task: b8ab9b00 ti: b7e68000 task.ti: b7e68000 [ 1704.877798] PC is at __down_interruptible+0x50/0xec [ 1704.877806] LR is at down_interruptible+0x5c/0x68 [ 1704.877813] pc : [<80630ee8>] lr : [<800704b0>] psr: 60080093 sp : b7e69e50 ip : b7e69e88 fp : b7e69e84 [ 1704.877817] r10: b88123c8 r9 : 00000010 r8 : 00000001 [ 1704.877822] r7 : b8ab9b00 r6 : 7fffffff r5 : 80a1cc34 r4 : 80a1cc34 [ 1704.877826] r3 : b7e69e50 r2 : 00000000 r1 : 00000000 r0 : 80a1cc34 [ 1704.877833] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1704.877838] Control: 10c5387d Table: 3899c06a DAC: 00000015 [ 1704.877843] Process do-oops (pid: 3656, stack limit = 0xb7e68238) [ 1704.877848] Stack: (0xb7e69e50 to 0xb7e6a000) [ 1704.877856] 9e40: 80a1cc3c 00000000 00000010 b88123c8 [ 1704.877865] 9e60: b7e69e84 80a1cc34 fff9fee9 ffffffff b7e68000 00000009 b7e69ea4 b7e69e88 [ 1704.877874] 9e80: 800704b0 80630ea4 fff9fee9 60080013 80a1cc28 fff9fee9 b7e69edc b7e69ea8 [ 1704.877884] 9ea0: 8040f558 80070460 fff9fee9 ffffffff 00000000 00000000 00000009 80a1cb7c [ 1704.877893] 9ec0: 00000000 80a1cb7c 00000000 00000010 b7e69ef4 b7e69ee0 803e1ba4 8040f514 [ 1704.877902] 9ee0: 00000e48 80a1cb7c b7e69f14 b7e69ef8 803e1c9c 803e1b74 b88123c0 b92acb18 [ 1704.877911] 9f00: b8812790 b8d815d8 b7e69f24 b7e69f18 803e2250 803e1bc8 b7e69f5c b7e69f28 [ 1704.877921] 9f20: 80167bac 803e222c 00000000 00000000 b7e69f54 b8ab9ffc 00000000 8098c794 [ 1704.877930] 9f40: b8ab9b00 8000efc4 b7e68000 00000000 b7e69f6c b7e69f60 80167d6c 80167b28 [ 1704.877939] 9f60: b7e69f8c b7e69f70 80047d38 80167d60 b7e68000 b7e68010 8000efc4 b7e69fb0 [ 1704.877949] 9f80: b7e69fac b7e69f90 80012820 80047c84 01155490 011549a8 00000001 00000006 [ 1704.877957] 9fa0: 00000000 b7e69fb0 8000ee5c 80012790 00000000 353d8c0f 7efc4308 00000000 [ 1704.877966] 9fc0: 01155490 011549a8 00000001 00000006 00000000 00000000 76cf3ba0 00000003 [ 1704.877975] 9fe0: 00000000 7efc42e4 0002272f 76e2ed66 60080030 00000003 00000000 00000000 [ 1704.877998] [<80630ee8>] (__down_interruptible) from [<800704b0>] (down_interruptible+0x5c/0x68) [ 1704.878015] [<800704b0>] (down_interruptible) from [<8040f558>] (vchiu_queue_push+0x50/0xd8) [ 1704.878032] [<8040f558>] (vchiu_queue_push) from [<803e1ba4>] (send_worker_msg+0x3c/0x54) [ 1704.878045] [<803e1ba4>] (send_worker_msg) from [<803e1c9c>] (vc_cma_set_reserve+0xe0/0x1c4) [ 1704.878057] [<803e1c9c>] (vc_cma_set_reserve) from [<803e2250>] (vc_cma_release+0x30/0x38) [ 1704.878069] [<803e2250>] (vc_cma_release) from [<80167bac>] (__fput+0x90/0x1e0) [ 1704.878082] [<80167bac>] (__fput) from [<80167d6c>] (____fput+0x18/0x1c) [ 1704.878094] [<80167d6c>] (____fput) from [<80047d38>] (task_work_run+0xc0/0xf8) [ 1704.878109] [<80047d38>] (task_work_run) from [<80012820>] (do_work_pending+0x9c/0xc4) [ 1704.878123] [<80012820>] (do_work_pending) from [<8000ee5c>] (work_pending+0xc/0x20) [ 1704.878133] Code: e50b1034 e3a01000 e50b2030 e580300c (e5823000) ..the fix is to ensure that we have actually initialized the queue before we attempt to push any items onto it. This occurs if we do an open() followed by a close() without any activity in between. Signed-off-by: Colin Ian King <[email protected]> vchiq_arm: Sort out the vmalloc case See: raspberrypi/linux#1055 vchiq: hack: Add include depecated dma include file

Signed-off-by: popcornmix <[email protected]> vchiq: create_pagelist copes with vmalloc memory Signed-off-by: Daniel Stone <[email protected]> vchiq: fix the shim message release Signed-off-by: Daniel Stone <[email protected]> vchiq: export additional symbols Signed-off-by: Daniel Stone <[email protected]> VCHIQ: Make service closure fully synchronous (drv) This is one half of a two-part patch, the other half of which is to the vchiq_lib user library. With these patches, calls to vchiq_close_service and vchiq_remove_service won't return until any associated callbacks have been delivered to the callback thread. VCHIQ: Add per-service tracing The new service option VCHIQ_SERVICE_OPTION_TRACE is a boolean that toggles tracing for the specified service. This commit also introduces vchi_service_set_option and the associated option VCHI_SERVICE_OPTION_TRACE. vchiq: Make the synchronous-CLOSE logic more tolerant vchiq: Move logging control into debugfs vchiq: Take care of a corner case tickled by VCSM Closing a connection that isn't fully open requires care, since one side does not know the other side's port number. Code was present to handle the case where a CLOSE is sent immediately after an OPEN, i.e. before the OPENACK has been received, but this was incorrectly being used when an OPEN from a client using port 0 was rejected. (In the observed failure, the host was attempting to use the VCSM service, which isn't present in the 'cutdown' firmware. The failure was intermittent because sometimes the keepalive service would grab port 0.) This case can be distinguished because the client's remoteport will still be VCHIQ_PORT_FREE, and the srvstate will be OPENING. Either condition is sufficient to differentiate it from the special case described above. vchiq: Avoid high load when blocked and unkillable vchiq: Include SIGSTOP and SIGCONT in list of signals not-masked by vchiq to allow gdb to work vchiq_arm: Complete support for SYNCHRONOUS mode vchiq: Remove inline from suspend/resume vchiq: Allocation does not need to be atomic vchiq: Fix wrong condition check The log level is checked from within the log call. Remove the check in the call. Signed-off-by: Pranith Kumar <[email protected]> BCM270x: Add vchiq device to platform file and Device Tree Prepare to turn the vchiq module into a driver. Signed-off-by: Noralf Trønnes <[email protected]> bcm2708: vchiq: Add Device Tree support Turn vchiq into a driver and stop hardcoding resources. Use devm_* functions in probe path to simplify cleanup. A global variable is used to hold the register address. This is done to keep this patch as small as possible. Also make available on ARCH_BCM2835. Based on work by Lubomir Rintel. Signed-off-by: Noralf Trønnes <[email protected]> vchiq: Change logging level for inbound data vchiq_arm: Two cacheing fixes 1) Make fragment size vary with cache line size Without this patch, non-cache-line-aligned transfers may corrupt (or be corrupted by) adjacent data structures. Both ARM and VC need to be updated to enable this feature. This is ensured by having the loader apply a new DT parameter - cache-line-size. The existence of this parameter guarantees that the kernel is capable, and the parameter will only be modified from the safe default if the loader is capable. 2) Flush/invalidate vmalloc'd memory, and invalidate after reads vchiq: fix NULL pointer dereference when closing driver The following code run as root will cause a null pointer dereference oops: int fd = open("/dev/vc-cma", O_RDONLY); if (fd < 0) err(1, "open failed"); (void)close(fd); [ 1704.877721] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 1704.877725] pgd = b899c000 [ 1704.877736] [00000000] *pgd=37fab831, *pte=00000000, *ppte=00000000 [ 1704.877748] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 1704.877765] Modules linked in: evdev i2c_bcm2708 uio_pdrv_genirq uio [ 1704.877774] CPU: 2 PID: 3656 Comm: stress-ng-fstat Not tainted 3.19.1-12-generic-bcm2709 torvalds#12-Ubuntu [ 1704.877777] Hardware name: BCM2709 [ 1704.877783] task: b8ab9b00 ti: b7e68000 task.ti: b7e68000 [ 1704.877798] PC is at __down_interruptible+0x50/0xec [ 1704.877806] LR is at down_interruptible+0x5c/0x68 [ 1704.877813] pc : [<80630ee8>] lr : [<800704b0>] psr: 60080093 sp : b7e69e50 ip : b7e69e88 fp : b7e69e84 [ 1704.877817] r10: b88123c8 r9 : 00000010 r8 : 00000001 [ 1704.877822] r7 : b8ab9b00 r6 : 7fffffff r5 : 80a1cc34 r4 : 80a1cc34 [ 1704.877826] r3 : b7e69e50 r2 : 00000000 r1 : 00000000 r0 : 80a1cc34 [ 1704.877833] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1704.877838] Control: 10c5387d Table: 3899c06a DAC: 00000015 [ 1704.877843] Process do-oops (pid: 3656, stack limit = 0xb7e68238) [ 1704.877848] Stack: (0xb7e69e50 to 0xb7e6a000) [ 1704.877856] 9e40: 80a1cc3c 00000000 00000010 b88123c8 [ 1704.877865] 9e60: b7e69e84 80a1cc34 fff9fee9 ffffffff b7e68000 00000009 b7e69ea4 b7e69e88 [ 1704.877874] 9e80: 800704b0 80630ea4 fff9fee9 60080013 80a1cc28 fff9fee9 b7e69edc b7e69ea8 [ 1704.877884] 9ea0: 8040f558 80070460 fff9fee9 ffffffff 00000000 00000000 00000009 80a1cb7c [ 1704.877893] 9ec0: 00000000 80a1cb7c 00000000 00000010 b7e69ef4 b7e69ee0 803e1ba4 8040f514 [ 1704.877902] 9ee0: 00000e48 80a1cb7c b7e69f14 b7e69ef8 803e1c9c 803e1b74 b88123c0 b92acb18 [ 1704.877911] 9f00: b8812790 b8d815d8 b7e69f24 b7e69f18 803e2250 803e1bc8 b7e69f5c b7e69f28 [ 1704.877921] 9f20: 80167bac 803e222c 00000000 00000000 b7e69f54 b8ab9ffc 00000000 8098c794 [ 1704.877930] 9f40: b8ab9b00 8000efc4 b7e68000 00000000 b7e69f6c b7e69f60 80167d6c 80167b28 [ 1704.877939] 9f60: b7e69f8c b7e69f70 80047d38 80167d60 b7e68000 b7e68010 8000efc4 b7e69fb0 [ 1704.877949] 9f80: b7e69fac b7e69f90 80012820 80047c84 01155490 011549a8 00000001 00000006 [ 1704.877957] 9fa0: 00000000 b7e69fb0 8000ee5c 80012790 00000000 353d8c0f 7efc4308 00000000 [ 1704.877966] 9fc0: 01155490 011549a8 00000001 00000006 00000000 00000000 76cf3ba0 00000003 [ 1704.877975] 9fe0: 00000000 7efc42e4 0002272f 76e2ed66 60080030 00000003 00000000 00000000 [ 1704.877998] [<80630ee8>] (__down_interruptible) from [<800704b0>] (down_interruptible+0x5c/0x68) [ 1704.878015] [<800704b0>] (down_interruptible) from [<8040f558>] (vchiu_queue_push+0x50/0xd8) [ 1704.878032] [<8040f558>] (vchiu_queue_push) from [<803e1ba4>] (send_worker_msg+0x3c/0x54) [ 1704.878045] [<803e1ba4>] (send_worker_msg) from [<803e1c9c>] (vc_cma_set_reserve+0xe0/0x1c4) [ 1704.878057] [<803e1c9c>] (vc_cma_set_reserve) from [<803e2250>] (vc_cma_release+0x30/0x38) [ 1704.878069] [<803e2250>] (vc_cma_release) from [<80167bac>] (__fput+0x90/0x1e0) [ 1704.878082] [<80167bac>] (__fput) from [<80167d6c>] (____fput+0x18/0x1c) [ 1704.878094] [<80167d6c>] (____fput) from [<80047d38>] (task_work_run+0xc0/0xf8) [ 1704.878109] [<80047d38>] (task_work_run) from [<80012820>] (do_work_pending+0x9c/0xc4) [ 1704.878123] [<80012820>] (do_work_pending) from [<8000ee5c>] (work_pending+0xc/0x20) [ 1704.878133] Code: e50b1034 e3a01000 e50b2030 e580300c (e5823000) ..the fix is to ensure that we have actually initialized the queue before we attempt to push any items onto it. This occurs if we do an open() followed by a close() without any activity in between. Signed-off-by: Colin Ian King <[email protected]> vchiq_arm: Sort out the vmalloc case See: raspberrypi/linux#1055 vchiq: hack: Add include depecated dma include file

Signed-off-by: popcornmix <[email protected]> vchiq: create_pagelist copes with vmalloc memory Signed-off-by: Daniel Stone <[email protected]> vchiq: fix the shim message release Signed-off-by: Daniel Stone <[email protected]> vchiq: export additional symbols Signed-off-by: Daniel Stone <[email protected]> VCHIQ: Make service closure fully synchronous (drv) This is one half of a two-part patch, the other half of which is to the vchiq_lib user library. With these patches, calls to vchiq_close_service and vchiq_remove_service won't return until any associated callbacks have been delivered to the callback thread. VCHIQ: Add per-service tracing The new service option VCHIQ_SERVICE_OPTION_TRACE is a boolean that toggles tracing for the specified service. This commit also introduces vchi_service_set_option and the associated option VCHI_SERVICE_OPTION_TRACE. vchiq: Make the synchronous-CLOSE logic more tolerant vchiq: Move logging control into debugfs vchiq: Take care of a corner case tickled by VCSM Closing a connection that isn't fully open requires care, since one side does not know the other side's port number. Code was present to handle the case where a CLOSE is sent immediately after an OPEN, i.e. before the OPENACK has been received, but this was incorrectly being used when an OPEN from a client using port 0 was rejected. (In the observed failure, the host was attempting to use the VCSM service, which isn't present in the 'cutdown' firmware. The failure was intermittent because sometimes the keepalive service would grab port 0.) This case can be distinguished because the client's remoteport will still be VCHIQ_PORT_FREE, and the srvstate will be OPENING. Either condition is sufficient to differentiate it from the special case described above. vchiq: Avoid high load when blocked and unkillable vchiq: Include SIGSTOP and SIGCONT in list of signals not-masked by vchiq to allow gdb to work vchiq_arm: Complete support for SYNCHRONOUS mode vchiq: Remove inline from suspend/resume vchiq: Allocation does not need to be atomic vchiq: Fix wrong condition check The log level is checked from within the log call. Remove the check in the call. Signed-off-by: Pranith Kumar <[email protected]> BCM270x: Add vchiq device to platform file and Device Tree Prepare to turn the vchiq module into a driver. Signed-off-by: Noralf Trønnes <[email protected]> bcm2708: vchiq: Add Device Tree support Turn vchiq into a driver and stop hardcoding resources. Use devm_* functions in probe path to simplify cleanup. A global variable is used to hold the register address. This is done to keep this patch as small as possible. Also make available on ARCH_BCM2835. Based on work by Lubomir Rintel. Signed-off-by: Noralf Trønnes <[email protected]> vchiq: Change logging level for inbound data vchiq_arm: Two cacheing fixes 1) Make fragment size vary with cache line size Without this patch, non-cache-line-aligned transfers may corrupt (or be corrupted by) adjacent data structures. Both ARM and VC need to be updated to enable this feature. This is ensured by having the loader apply a new DT parameter - cache-line-size. The existence of this parameter guarantees that the kernel is capable, and the parameter will only be modified from the safe default if the loader is capable. 2) Flush/invalidate vmalloc'd memory, and invalidate after reads vchiq: fix NULL pointer dereference when closing driver The following code run as root will cause a null pointer dereference oops: int fd = open("/dev/vc-cma", O_RDONLY); if (fd < 0) err(1, "open failed"); (void)close(fd); [ 1704.877721] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 1704.877725] pgd = b899c000 [ 1704.877736] [00000000] *pgd=37fab831, *pte=00000000, *ppte=00000000 [ 1704.877748] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 1704.877765] Modules linked in: evdev i2c_bcm2708 uio_pdrv_genirq uio [ 1704.877774] CPU: 2 PID: 3656 Comm: stress-ng-fstat Not tainted 3.19.1-12-generic-bcm2709 #12-Ubuntu [ 1704.877777] Hardware name: BCM2709 [ 1704.877783] task: b8ab9b00 ti: b7e68000 task.ti: b7e68000 [ 1704.877798] PC is at __down_interruptible+0x50/0xec [ 1704.877806] LR is at down_interruptible+0x5c/0x68 [ 1704.877813] pc : [<80630ee8>] lr : [<800704b0>] psr: 60080093 sp : b7e69e50 ip : b7e69e88 fp : b7e69e84 [ 1704.877817] r10: b88123c8 r9 : 00000010 r8 : 00000001 [ 1704.877822] r7 : b8ab9b00 r6 : 7fffffff r5 : 80a1cc34 r4 : 80a1cc34 [ 1704.877826] r3 : b7e69e50 r2 : 00000000 r1 : 00000000 r0 : 80a1cc34 [ 1704.877833] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1704.877838] Control: 10c5387d Table: 3899c06a DAC: 00000015 [ 1704.877843] Process do-oops (pid: 3656, stack limit = 0xb7e68238) [ 1704.877848] Stack: (0xb7e69e50 to 0xb7e6a000) [ 1704.877856] 9e40: 80a1cc3c 00000000 00000010 b88123c8 [ 1704.877865] 9e60: b7e69e84 80a1cc34 fff9fee9 ffffffff b7e68000 00000009 b7e69ea4 b7e69e88 [ 1704.877874] 9e80: 800704b0 80630ea4 fff9fee9 60080013 80a1cc28 fff9fee9 b7e69edc b7e69ea8 [ 1704.877884] 9ea0: 8040f558 80070460 fff9fee9 ffffffff 00000000 00000000 00000009 80a1cb7c [ 1704.877893] 9ec0: 00000000 80a1cb7c 00000000 00000010 b7e69ef4 b7e69ee0 803e1ba4 8040f514 [ 1704.877902] 9ee0: 00000e48 80a1cb7c b7e69f14 b7e69ef8 803e1c9c 803e1b74 b88123c0 b92acb18 [ 1704.877911] 9f00: b8812790 b8d815d8 b7e69f24 b7e69f18 803e2250 803e1bc8 b7e69f5c b7e69f28 [ 1704.877921] 9f20: 80167bac 803e222c 00000000 00000000 b7e69f54 b8ab9ffc 00000000 8098c794 [ 1704.877930] 9f40: b8ab9b00 8000efc4 b7e68000 00000000 b7e69f6c b7e69f60 80167d6c 80167b28 [ 1704.877939] 9f60: b7e69f8c b7e69f70 80047d38 80167d60 b7e68000 b7e68010 8000efc4 b7e69fb0 [ 1704.877949] 9f80: b7e69fac b7e69f90 80012820 80047c84 01155490 011549a8 00000001 00000006 [ 1704.877957] 9fa0: 00000000 b7e69fb0 8000ee5c 80012790 00000000 353d8c0f 7efc4308 00000000 [ 1704.877966] 9fc0: 01155490 011549a8 00000001 00000006 00000000 00000000 76cf3ba0 00000003 [ 1704.877975] 9fe0: 00000000 7efc42e4 0002272f 76e2ed66 60080030 00000003 00000000 00000000 [ 1704.877998] [<80630ee8>] (__down_interruptible) from [<800704b0>] (down_interruptible+0x5c/0x68) [ 1704.878015] [<800704b0>] (down_interruptible) from [<8040f558>] (vchiu_queue_push+0x50/0xd8) [ 1704.878032] [<8040f558>] (vchiu_queue_push) from [<803e1ba4>] (send_worker_msg+0x3c/0x54) [ 1704.878045] [<803e1ba4>] (send_worker_msg) from [<803e1c9c>] (vc_cma_set_reserve+0xe0/0x1c4) [ 1704.878057] [<803e1c9c>] (vc_cma_set_reserve) from [<803e2250>] (vc_cma_release+0x30/0x38) [ 1704.878069] [<803e2250>] (vc_cma_release) from [<80167bac>] (__fput+0x90/0x1e0) [ 1704.878082] [<80167bac>] (__fput) from [<80167d6c>] (____fput+0x18/0x1c) [ 1704.878094] [<80167d6c>] (____fput) from [<80047d38>] (task_work_run+0xc0/0xf8) [ 1704.878109] [<80047d38>] (task_work_run) from [<80012820>] (do_work_pending+0x9c/0xc4) [ 1704.878123] [<80012820>] (do_work_pending) from [<8000ee5c>] (work_pending+0xc/0x20) [ 1704.878133] Code: e50b1034 e3a01000 e50b2030 e580300c (e5823000) ..the fix is to ensure that we have actually initialized the queue before we attempt to push any items onto it. This occurs if we do an open() followed by a close() without any activity in between. Signed-off-by: Colin Ian King <[email protected]> vchiq_arm: Sort out the vmalloc case See: raspberrypi/linux#1055 vchiq: hack: Add include depecated dma include file vchiq_arm: Tweak the logging output Signed-off-by: Phil Elwell <[email protected]> vchiq_arm: Access the dequeue_pending flag locked Reading through this code looking for another problem (now found in userland) the use of dequeue_pending outside a lock didn't seem safe. Signed-off-by: Phil Elwell <[email protected]> vchiq_arm: Service callbacks must not fail Service callbacks are not allowed to return an error. The internal callback that delivers events and messages to user tasks does not enqueue them if the service is closing, but this is not an error and should not be reported as such. Signed-off-by: Phil Elwell <[email protected]> vchiq_arm: do not use page_cache_release(page) macro (#1403) This macro is gone since 1fa64f1. Signed-off-by: Slawomir Stepien <[email protected]> vchiq: Upate to match get_user_pages prototype vchiq_arm: Add completion records under the mutex An issue was observed when flushing openmax components which generate a large number of messages returning buffers to host. We occasionally found a duplicate message from 16 messages prior, resulting in a buffer returned twice. While only one thread adds completions, without the mutex you don't get the protection of the automatic memory barrier you get with synchronisation objects. Signed-off-by: Phil Elwell <[email protected]>

Signed-off-by: popcornmix <[email protected]> vchiq: create_pagelist copes with vmalloc memory Signed-off-by: Daniel Stone <[email protected]> vchiq: fix the shim message release Signed-off-by: Daniel Stone <[email protected]> vchiq: export additional symbols Signed-off-by: Daniel Stone <[email protected]> VCHIQ: Make service closure fully synchronous (drv) This is one half of a two-part patch, the other half of which is to the vchiq_lib user library. With these patches, calls to vchiq_close_service and vchiq_remove_service won't return until any associated callbacks have been delivered to the callback thread. VCHIQ: Add per-service tracing The new service option VCHIQ_SERVICE_OPTION_TRACE is a boolean that toggles tracing for the specified service. This commit also introduces vchi_service_set_option and the associated option VCHI_SERVICE_OPTION_TRACE. vchiq: Make the synchronous-CLOSE logic more tolerant vchiq: Move logging control into debugfs vchiq: Take care of a corner case tickled by VCSM Closing a connection that isn't fully open requires care, since one side does not know the other side's port number. Code was present to handle the case where a CLOSE is sent immediately after an OPEN, i.e. before the OPENACK has been received, but this was incorrectly being used when an OPEN from a client using port 0 was rejected. (In the observed failure, the host was attempting to use the VCSM service, which isn't present in the 'cutdown' firmware. The failure was intermittent because sometimes the keepalive service would grab port 0.) This case can be distinguished because the client's remoteport will still be VCHIQ_PORT_FREE, and the srvstate will be OPENING. Either condition is sufficient to differentiate it from the special case described above. vchiq: Avoid high load when blocked and unkillable vchiq: Include SIGSTOP and SIGCONT in list of signals not-masked by vchiq to allow gdb to work vchiq_arm: Complete support for SYNCHRONOUS mode vchiq: Remove inline from suspend/resume vchiq: Allocation does not need to be atomic vchiq: Fix wrong condition check The log level is checked from within the log call. Remove the check in the call. Signed-off-by: Pranith Kumar <[email protected]> BCM270x: Add vchiq device to platform file and Device Tree Prepare to turn the vchiq module into a driver. Signed-off-by: Noralf Trønnes <[email protected]> bcm2708: vchiq: Add Device Tree support Turn vchiq into a driver and stop hardcoding resources. Use devm_* functions in probe path to simplify cleanup. A global variable is used to hold the register address. This is done to keep this patch as small as possible. Also make available on ARCH_BCM2835. Based on work by Lubomir Rintel. Signed-off-by: Noralf Trønnes <[email protected]> vchiq: Change logging level for inbound data vchiq_arm: Two cacheing fixes 1) Make fragment size vary with cache line size Without this patch, non-cache-line-aligned transfers may corrupt (or be corrupted by) adjacent data structures. Both ARM and VC need to be updated to enable this feature. This is ensured by having the loader apply a new DT parameter - cache-line-size. The existence of this parameter guarantees that the kernel is capable, and the parameter will only be modified from the safe default if the loader is capable. 2) Flush/invalidate vmalloc'd memory, and invalidate after reads vchiq: fix NULL pointer dereference when closing driver The following code run as root will cause a null pointer dereference oops: int fd = open("/dev/vc-cma", O_RDONLY); if (fd < 0) err(1, "open failed"); (void)close(fd); [ 1704.877721] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 1704.877725] pgd = b899c000 [ 1704.877736] [00000000] *pgd=37fab831, *pte=00000000, *ppte=00000000 [ 1704.877748] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 1704.877765] Modules linked in: evdev i2c_bcm2708 uio_pdrv_genirq uio [ 1704.877774] CPU: 2 PID: 3656 Comm: stress-ng-fstat Not tainted 3.19.1-12-generic-bcm2709 #12-Ubuntu [ 1704.877777] Hardware name: BCM2709 [ 1704.877783] task: b8ab9b00 ti: b7e68000 task.ti: b7e68000 [ 1704.877798] PC is at __down_interruptible+0x50/0xec [ 1704.877806] LR is at down_interruptible+0x5c/0x68 [ 1704.877813] pc : [<80630ee8>] lr : [<800704b0>] psr: 60080093 sp : b7e69e50 ip : b7e69e88 fp : b7e69e84 [ 1704.877817] r10: b88123c8 r9 : 00000010 r8 : 00000001 [ 1704.877822] r7 : b8ab9b00 r6 : 7fffffff r5 : 80a1cc34 r4 : 80a1cc34 [ 1704.877826] r3 : b7e69e50 r2 : 00000000 r1 : 00000000 r0 : 80a1cc34 [ 1704.877833] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1704.877838] Control: 10c5387d Table: 3899c06a DAC: 00000015 [ 1704.877843] Process do-oops (pid: 3656, stack limit = 0xb7e68238) [ 1704.877848] Stack: (0xb7e69e50 to 0xb7e6a000) [ 1704.877856] 9e40: 80a1cc3c 00000000 00000010 b88123c8 [ 1704.877865] 9e60: b7e69e84 80a1cc34 fff9fee9 ffffffff b7e68000 00000009 b7e69ea4 b7e69e88 [ 1704.877874] 9e80: 800704b0 80630ea4 fff9fee9 60080013 80a1cc28 fff9fee9 b7e69edc b7e69ea8 [ 1704.877884] 9ea0: 8040f558 80070460 fff9fee9 ffffffff 00000000 00000000 00000009 80a1cb7c [ 1704.877893] 9ec0: 00000000 80a1cb7c 00000000 00000010 b7e69ef4 b7e69ee0 803e1ba4 8040f514 [ 1704.877902] 9ee0: 00000e48 80a1cb7c b7e69f14 b7e69ef8 803e1c9c 803e1b74 b88123c0 b92acb18 [ 1704.877911] 9f00: b8812790 b8d815d8 b7e69f24 b7e69f18 803e2250 803e1bc8 b7e69f5c b7e69f28 [ 1704.877921] 9f20: 80167bac 803e222c 00000000 00000000 b7e69f54 b8ab9ffc 00000000 8098c794 [ 1704.877930] 9f40: b8ab9b00 8000efc4 b7e68000 00000000 b7e69f6c b7e69f60 80167d6c 80167b28 [ 1704.877939] 9f60: b7e69f8c b7e69f70 80047d38 80167d60 b7e68000 b7e68010 8000efc4 b7e69fb0 [ 1704.877949] 9f80: b7e69fac b7e69f90 80012820 80047c84 01155490 011549a8 00000001 00000006 [ 1704.877957] 9fa0: 00000000 b7e69fb0 8000ee5c 80012790 00000000 353d8c0f 7efc4308 00000000 [ 1704.877966] 9fc0: 01155490 011549a8 00000001 00000006 00000000 00000000 76cf3ba0 00000003 [ 1704.877975] 9fe0: 00000000 7efc42e4 0002272f 76e2ed66 60080030 00000003 00000000 00000000 [ 1704.877998] [<80630ee8>] (__down_interruptible) from [<800704b0>] (down_interruptible+0x5c/0x68) [ 1704.878015] [<800704b0>] (down_interruptible) from [<8040f558>] (vchiu_queue_push+0x50/0xd8) [ 1704.878032] [<8040f558>] (vchiu_queue_push) from [<803e1ba4>] (send_worker_msg+0x3c/0x54) [ 1704.878045] [<803e1ba4>] (send_worker_msg) from [<803e1c9c>] (vc_cma_set_reserve+0xe0/0x1c4) [ 1704.878057] [<803e1c9c>] (vc_cma_set_reserve) from [<803e2250>] (vc_cma_release+0x30/0x38) [ 1704.878069] [<803e2250>] (vc_cma_release) from [<80167bac>] (__fput+0x90/0x1e0) [ 1704.878082] [<80167bac>] (__fput) from [<80167d6c>] (____fput+0x18/0x1c) [ 1704.878094] [<80167d6c>] (____fput) from [<80047d38>] (task_work_run+0xc0/0xf8) [ 1704.878109] [<80047d38>] (task_work_run) from [<80012820>] (do_work_pending+0x9c/0xc4) [ 1704.878123] [<80012820>] (do_work_pending) from [<8000ee5c>] (work_pending+0xc/0x20) [ 1704.878133] Code: e50b1034 e3a01000 e50b2030 e580300c (e5823000) ..the fix is to ensure that we have actually initialized the queue before we attempt to push any items onto it. This occurs if we do an open() followed by a close() without any activity in between. Signed-off-by: Colin Ian King <[email protected]> vchiq_arm: Sort out the vmalloc case See: raspberrypi/linux#1055 vchiq: hack: Add include depecated dma include file

Signed-off-by: popcornmix <[email protected]> vchiq: create_pagelist copes with vmalloc memory Signed-off-by: Daniel Stone <[email protected]> vchiq: fix the shim message release Signed-off-by: Daniel Stone <[email protected]> vchiq: export additional symbols Signed-off-by: Daniel Stone <[email protected]> VCHIQ: Make service closure fully synchronous (drv) This is one half of a two-part patch, the other half of which is to the vchiq_lib user library. With these patches, calls to vchiq_close_service and vchiq_remove_service won't return until any associated callbacks have been delivered to the callback thread. VCHIQ: Add per-service tracing The new service option VCHIQ_SERVICE_OPTION_TRACE is a boolean that toggles tracing for the specified service. This commit also introduces vchi_service_set_option and the associated option VCHI_SERVICE_OPTION_TRACE. vchiq: Make the synchronous-CLOSE logic more tolerant vchiq: Move logging control into debugfs vchiq: Take care of a corner case tickled by VCSM Closing a connection that isn't fully open requires care, since one side does not know the other side's port number. Code was present to handle the case where a CLOSE is sent immediately after an OPEN, i.e. before the OPENACK has been received, but this was incorrectly being used when an OPEN from a client using port 0 was rejected. (In the observed failure, the host was attempting to use the VCSM service, which isn't present in the 'cutdown' firmware. The failure was intermittent because sometimes the keepalive service would grab port 0.) This case can be distinguished because the client's remoteport will still be VCHIQ_PORT_FREE, and the srvstate will be OPENING. Either condition is sufficient to differentiate it from the special case described above. vchiq: Avoid high load when blocked and unkillable vchiq: Include SIGSTOP and SIGCONT in list of signals not-masked by vchiq to allow gdb to work vchiq_arm: Complete support for SYNCHRONOUS mode vchiq: Remove inline from suspend/resume vchiq: Allocation does not need to be atomic vchiq: Fix wrong condition check The log level is checked from within the log call. Remove the check in the call. Signed-off-by: Pranith Kumar <[email protected]> BCM270x: Add vchiq device to platform file and Device Tree Prepare to turn the vchiq module into a driver. Signed-off-by: Noralf Trønnes <[email protected]> bcm2708: vchiq: Add Device Tree support Turn vchiq into a driver and stop hardcoding resources. Use devm_* functions in probe path to simplify cleanup. A global variable is used to hold the register address. This is done to keep this patch as small as possible. Also make available on ARCH_BCM2835. Based on work by Lubomir Rintel. Signed-off-by: Noralf Trønnes <[email protected]> vchiq: Change logging level for inbound data vchiq_arm: Two cacheing fixes 1) Make fragment size vary with cache line size Without this patch, non-cache-line-aligned transfers may corrupt (or be corrupted by) adjacent data structures. Both ARM and VC need to be updated to enable this feature. This is ensured by having the loader apply a new DT parameter - cache-line-size. The existence of this parameter guarantees that the kernel is capable, and the parameter will only be modified from the safe default if the loader is capable. 2) Flush/invalidate vmalloc'd memory, and invalidate after reads vchiq: fix NULL pointer dereference when closing driver The following code run as root will cause a null pointer dereference oops: int fd = open("/dev/vc-cma", O_RDONLY); if (fd < 0) err(1, "open failed"); (void)close(fd); [ 1704.877721] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 1704.877725] pgd = b899c000 [ 1704.877736] [00000000] *pgd=37fab831, *pte=00000000, *ppte=00000000 [ 1704.877748] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 1704.877765] Modules linked in: evdev i2c_bcm2708 uio_pdrv_genirq uio [ 1704.877774] CPU: 2 PID: 3656 Comm: stress-ng-fstat Not tainted 3.19.1-12-generic-bcm2709 #12-Ubuntu [ 1704.877777] Hardware name: BCM2709 [ 1704.877783] task: b8ab9b00 ti: b7e68000 task.ti: b7e68000 [ 1704.877798] PC is at __down_interruptible+0x50/0xec [ 1704.877806] LR is at down_interruptible+0x5c/0x68 [ 1704.877813] pc : [<80630ee8>] lr : [<800704b0>] psr: 60080093 sp : b7e69e50 ip : b7e69e88 fp : b7e69e84 [ 1704.877817] r10: b88123c8 r9 : 00000010 r8 : 00000001 [ 1704.877822] r7 : b8ab9b00 r6 : 7fffffff r5 : 80a1cc34 r4 : 80a1cc34 [ 1704.877826] r3 : b7e69e50 r2 : 00000000 r1 : 00000000 r0 : 80a1cc34 [ 1704.877833] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1704.877838] Control: 10c5387d Table: 3899c06a DAC: 00000015 [ 1704.877843] Process do-oops (pid: 3656, stack limit = 0xb7e68238) [ 1704.877848] Stack: (0xb7e69e50 to 0xb7e6a000) [ 1704.877856] 9e40: 80a1cc3c 00000000 00000010 b88123c8 [ 1704.877865] 9e60: b7e69e84 80a1cc34 fff9fee9 ffffffff b7e68000 00000009 b7e69ea4 b7e69e88 [ 1704.877874] 9e80: 800704b0 80630ea4 fff9fee9 60080013 80a1cc28 fff9fee9 b7e69edc b7e69ea8 [ 1704.877884] 9ea0: 8040f558 80070460 fff9fee9 ffffffff 00000000 00000000 00000009 80a1cb7c [ 1704.877893] 9ec0: 00000000 80a1cb7c 00000000 00000010 b7e69ef4 b7e69ee0 803e1ba4 8040f514 [ 1704.877902] 9ee0: 00000e48 80a1cb7c b7e69f14 b7e69ef8 803e1c9c 803e1b74 b88123c0 b92acb18 [ 1704.877911] 9f00: b8812790 b8d815d8 b7e69f24 b7e69f18 803e2250 803e1bc8 b7e69f5c b7e69f28 [ 1704.877921] 9f20: 80167bac 803e222c 00000000 00000000 b7e69f54 b8ab9ffc 00000000 8098c794 [ 1704.877930] 9f40: b8ab9b00 8000efc4 b7e68000 00000000 b7e69f6c b7e69f60 80167d6c 80167b28 [ 1704.877939] 9f60: b7e69f8c b7e69f70 80047d38 80167d60 b7e68000 b7e68010 8000efc4 b7e69fb0 [ 1704.877949] 9f80: b7e69fac b7e69f90 80012820 80047c84 01155490 011549a8 00000001 00000006 [ 1704.877957] 9fa0: 00000000 b7e69fb0 8000ee5c 80012790 00000000 353d8c0f 7efc4308 00000000 [ 1704.877966] 9fc0: 01155490 011549a8 00000001 00000006 00000000 00000000 76cf3ba0 00000003 [ 1704.877975] 9fe0: 00000000 7efc42e4 0002272f 76e2ed66 60080030 00000003 00000000 00000000 [ 1704.877998] [<80630ee8>] (__down_interruptible) from [<800704b0>] (down_interruptible+0x5c/0x68) [ 1704.878015] [<800704b0>] (down_interruptible) from [<8040f558>] (vchiu_queue_push+0x50/0xd8) [ 1704.878032] [<8040f558>] (vchiu_queue_push) from [<803e1ba4>] (send_worker_msg+0x3c/0x54) [ 1704.878045] [<803e1ba4>] (send_worker_msg) from [<803e1c9c>] (vc_cma_set_reserve+0xe0/0x1c4) [ 1704.878057] [<803e1c9c>] (vc_cma_set_reserve) from [<803e2250>] (vc_cma_release+0x30/0x38) [ 1704.878069] [<803e2250>] (vc_cma_release) from [<80167bac>] (__fput+0x90/0x1e0) [ 1704.878082] [<80167bac>] (__fput) from [<80167d6c>] (____fput+0x18/0x1c) [ 1704.878094] [<80167d6c>] (____fput) from [<80047d38>] (task_work_run+0xc0/0xf8) [ 1704.878109] [<80047d38>] (task_work_run) from [<80012820>] (do_work_pending+0x9c/0xc4) [ 1704.878123] [<80012820>] (do_work_pending) from [<8000ee5c>] (work_pending+0xc/0x20) [ 1704.878133] Code: e50b1034 e3a01000 e50b2030 e580300c (e5823000) ..the fix is to ensure that we have actually initialized the queue before we attempt to push any items onto it. This occurs if we do an open() followed by a close() without any activity in between. Signed-off-by: Colin Ian King <[email protected]> vchiq_arm: Sort out the vmalloc case See: raspberrypi/linux#1055 vchiq: hack: Add include depecated dma include file vchiq_arm: Tweak the logging output Signed-off-by: Phil Elwell <[email protected]> vchiq_arm: Access the dequeue_pending flag locked Reading through this code looking for another problem (now found in userland) the use of dequeue_pending outside a lock didn't seem safe. Signed-off-by: Phil Elwell <[email protected]> vchiq_arm: Service callbacks must not fail Service callbacks are not allowed to return an error. The internal callback that delivers events and messages to user tasks does not enqueue them if the service is closing, but this is not an error and should not be reported as such. Signed-off-by: Phil Elwell <[email protected]> vchiq_arm: do not use page_cache_release(page) macro (#1403) This macro is gone since 1fa64f1. Signed-off-by: Slawomir Stepien <[email protected]> vchiq: Upate to match get_user_pages prototype vchiq_arm: Add completion records under the mutex An issue was observed when flushing openmax components which generate a large number of messages returning buffers to host. We occasionally found a duplicate message from 16 messages prior, resulting in a buffer returned twice. While only one thread adds completions, without the mutex you don't get the protection of the automatic memory barrier you get with synchronisation objects. Signed-off-by: Phil Elwell <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]>

Rally: US94129 1/203 [ Author: Steve Glendinning Email: [email protected] Subject: smsx95xx: fix crimes against truesize Date: Thu, 19 Feb 2015 18:47:12 +0000 smsc95xx is adjusting truesize when it shouldn't, and following a recent patch from Eric this is now triggering warnings. This patch stops smsc95xx from changing truesize. Signed-off-by: Steve Glendinning <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 2/203 [ Author: popcornmix Email: [email protected] Subject: smsc95xx: Disable turbo mode by default Date: Fri, 17 Apr 2015 16:58:45 +0100 [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 3/203 [ Author: Sam Nazarko Email: [email protected] Subject: add smsc95xx packetsize module_param Date: Fri, 1 Apr 2016 17:27:21 +0100 Signed-off-by: Sam Nazarko <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 4/203 [ Author: popcornmix Email: [email protected] Subject: Allow mac address to be set in smsc95xx Date: Tue, 26 Mar 2013 17:26:38 +0000 Signed-off-by: popcornmix <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 5/203 [ Author: popcornmix Email: [email protected] Subject: smsc95xx: Experimental: Enable turbo_mode and packetsize=2560 by default Date: Tue, 9 Aug 2016 22:19:28 +0100 See: http://forum.kodi.tv/showthread.php?tid=285288 [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 6/203 [ Author: Rob Herring Email: [email protected] Subject: tty: serial_core: add tty NULL check to uart_tx_stopped Date: Fri, 9 Sep 2016 17:37:02 -0500 commit a727b025f43d7952c0697562f5cecda9f42758aa upstream Commit 761ed4a94582 ("tty: serial_core: convert uart_close to use tty_port_close") created a case where a port used for a console does not get shutdown on tty closing. Then a call to uart_tx_stopped() segfaults because the tty is NULL. This could be fixed to restore old behavior, but we also want to allow tty_ports to work without a tty attached. So this change to allow a NULL tty_struct is needed either way. Fixes: 761ed4a94582 ("tty: serial_core: convert uart_close to use tty_port_close") Reported-by: kernel test robot <[email protected]> Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Xulin Sun <[email protected]> ] 7/203 [ Author: Phil Elwell Email: [email protected] Subject: Protect __release_resource against resources without parents Date: Fri, 13 Mar 2015 12:43:36 +0000 Without this patch, removing a device tree overlay can crash here. Signed-off-by: Phil Elwell <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 8/203 [ Author: Robert Tiemann Email: [email protected] Subject: BCM2835_DT: Fix I2S register map Date: Mon, 20 Jul 2015 11:01:25 +0200 [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 9/203 [ Author: Phil Elwell Email: [email protected] Subject: irq-bcm2836: Prevent spurious interrupts, and trap them early Date: Fri, 4 Dec 2015 17:41:50 +0000 The old arch-specific IRQ macros included a dsb to ensure the write to clear the mailbox interrupt completed before returning from the interrupt. The BCM2836 irqchip driver needs the same precaution to avoid spurious interrupts. Spurious interrupts are still possible for other reasons, though, so trap them early. [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 10/203 [ Author: Noralf Trønnes Email: [email protected] Subject: irqchip: bcm2835: Add FIQ support Date: Fri, 12 Jun 2015 19:01:05 +0200 Add a duplicate irq range with an offset on the hwirq's so the driver can detect that enable_fiq() is used. Tested with downstream dwc_otg USB controller driver. Signed-off-by: Noralf Trønnes <[email protected]> Reviewed-by: Eric Anholt <[email protected]> Acked-by: Stephen Warren <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 11/203 [ Author: Noralf Trønnes Email: [email protected] Subject: irqchip: irq-bcm2835: Add 2836 FIQ support Date: Fri, 23 Oct 2015 16:26:55 +0200 Signed-off-by: Noralf Trønnes <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 12/203 [ Author: Phil Elwell Email: [email protected] Subject: spidev: Add "spidev" compatible string to silence warning Date: Tue, 14 Jul 2015 10:26:09 +0100 See: https://github.com/raspberrypi/linux/issues/1054 [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 13/203 [ Author: Phil Elwell Email: [email protected] Subject: serial: 8250: Don't crash when nr_uarts is 0 Date: Tue, 30 Jun 2015 14:12:42 +0100 [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 14/203 [ Author: notro Email: [email protected] Subject: pinctrl-bcm2835: Set base to 0 give expected gpio numbering Date: Thu, 10 Jul 2014 13:59:47 +0200 Signed-off-by: Noralf Tronnes <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 15/203 [ Author: Phil Elwell Email: [email protected] Subject: pinctrl-bcm2835: Fix interrupt handling for GPIOs 28-31 and 46-53 Date: Tue, 24 Feb 2015 13:40:50 +0000 Contrary to the documentation, the BCM2835 GPIO controller actually has four interrupt lines - one each for the three IRQ groups and one common. Rather confusingly, the GPIO interrupt groups don't correspond directly with the GPIO control banks. Instead, GPIOs 0-27 generate IRQ GPIO0, 28-45 GPIO1 and 46-53 GPIO2. Awkwardly, the GPIOS for IRQ GPIO1 straddle two 32-entry GPIO banks, so it is cleaner to split out a function to process the interrupts for a single GPIO bank. This bug has only just been observed because GPIOs above 27 can only be accessed on an old Raspberry Pi with the optional P5 header fitted, where the pins are often used for I2S instead. [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 16/203 [ Author: Phil Elwell Email: [email protected] Subject: pinctrl-bcm2835: Only request the interrupts listed in the DTB Date: Thu, 26 Feb 2015 09:58:22 +0000 Although the GPIO controller can generate three interrupts (four counting the common one), the device tree files currently only specify two. In the absence of the third, simply don't register that interrupt (as opposed to registering 0), which has the effect of making it impossible to generate interrupts for GPIOs 46-53 which, since they share pins with the SD card interface, is unlikely to be a problem. [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 17/203 [ Author: Phil Elwell Email: [email protected] Subject: pinctrl-bcm2835: Return pins to inputs when freed Date: Fri, 6 May 2016 12:32:47 +0100 When dynamically unloading overlays, it is important that freed pins are restored to being inputs to prevent functions from being enabled in multiple places at once. Signed-off-by: Phil Elwell <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 18/203 [ Author: Phil Elwell Email: [email protected] Subject: spi-bcm2835: Support pin groups other than 7-11 Date: Wed, 24 Jun 2015 14:10:44 +0100 The spi-bcm2835 driver automatically uses GPIO chip-selects due to some unreliability of the native ones. In doing so it chooses the same pins as the native chip-selects would use, but the existing code always uses pins 7 and 8, wherever the SPI function is mapped. Search the pinctrl group assigned to the driver for pins that correspond to native chip-selects, and use those for GPIO chip- selects. Signed-off-by: Phil Elwell <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 19/203 [ Author: Phil Elwell Email: [email protected] Subject: spi-bcm2835: Disable forced software CS Date: Fri, 1 Jul 2016 22:09:24 +0100 Select software CS in bcm2708_common.dtsi, and disable the automatic conversion in the driver to allow hardware CS to be re-enabled with an overlay. See: https://github.com/raspberrypi/linux/issues/1547 Signed-off-by: Phil Elwell <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 20/203 [ Author: Noralf Trønnes Email: [email protected] Subject: ARM: bcm2835: Set Serial number and Revision Date: Wed, 3 Jun 2015 12:26:13 +0200 The VideoCore bootloader passes in Serial number and Revision number through Device Tree. Make these available to userspace through /proc/cpuinfo. Mainline status: There is a commit in linux-next that standardize passing the serial number through Device Tree (string: /serial-number): ARM: 8355/1: arch: Show the serial number from devicetree in cpuinfo There was an attempt to do the same with the revision number, but it didn't get in: [PATCH v2 1/2] arm: devtree: Set system_rev from DT revision Signed-off-by: Noralf Trønnes <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 21/203 [ Author: Noralf Trønnes Email: [email protected] Subject: dmaengine: bcm2835: Load driver early and support legacy API Date: Sat, 3 Oct 2015 22:22:55 +0200 Load driver early since at least bcm2708_fb doesn't support deferred probing and even if it did, we don't want the video driver deferred. Support the legacy DMA API which is needed by bcm2708_fb. Don't mask out channel 2. Signed-off-by: Noralf Trønnes <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 22/203 [ Author: popcornmix Email: [email protected] Subject: firmware: Updated mailbox header Date: Mon, 25 Jan 2016 17:25:12 +0000 [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 23/203 [ Author: Eric Anholt Email: [email protected] Subject: clk: bcm2835: Mark the VPU clock as critical Date: Tue, 26 Apr 2016 11:44:59 -0700 The VPU clock is also the clock for our AXI bus, so we really can't disable it. This might have happened during boot if, for example, uart1 (aux_uart clock) probed and was then disabled before the other consumers of the VPU clock had probed. v2: Rewrite to use a .flags in bcm2835_clock_data, since other clocks will need this too. Signed-off-by: Eric Anholt <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 24/203 [ Author: Eric Anholt Email: [email protected] Subject: clk: bcm2835: Mark GPIO clocks enabled at boot as critical. Date: Mon, 9 May 2016 17:28:18 -0700 These divide off of PLLD_PER and are used for the ethernet and wifi PHYs source PLLs. Neither of them is currently represented by a phy device that would grab the clock for us. This keeps other drivers from killing the networking PHYs when they disable their own clocks and trigger PLLD_PER's refcount going to 0. v2: Skip marking as critical if they aren't on at boot. Signed-off-by: Eric Anholt <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 25/203 [ Author: Eric Anholt Email: [email protected] Subject: clk: bcm2835: Mark the CM SDRAM clock's parent as critical Date: Wed, 1 Jun 2016 12:05:35 -0700 While the SDRAM is being driven by its dedicated PLL most of the time, there is a little loop running in the firmware that periodically turns on the CM SDRAM clock (using its pre-initialized parent) and switches SDRAM to using the CM clock to do PVT recalibration. This avoids system hangs if we choose SDRAM's parent for some other clock, then disable that clock. Signed-off-by: Eric Anholt <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 26/203 [ Author: popcornmix Email: [email protected] Subject: Enable upstream BCM2835 auxiliar mini UART support Date: Mon, 3 Oct 2016 13:58:40 +0100 [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 27/203 [ Author: Phil Elwell Email: [email protected] Subject: rtc: Add SPI alias for pcf2123 driver Date: Wed, 15 Jun 2016 16:48:41 +0100 Without this alias, Device Tree won't cause the driver to be loaded. See: https://github.com/raspberrypi/linux/pull/1510 [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 28/203 [ Author: Eric Anholt Email: [email protected] Subject: ARM: bcm2708: Enable building power domain driver. Date: Tue, 19 Apr 2016 15:55:02 -0700 Signed-off-by: Eric Anholt <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 29/203 [ Author: popcornmix Email: [email protected] Subject: Main bcm2708/bcm2709 linux port Date: Sun, 12 May 2013 12:24:19 +0100 Signed-off-by: popcornmix <[email protected]> Signed-off-by: Noralf Trønnes <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 30/203 [ Author: popcornmix Email: [email protected] Subject: reboot: Use power off rather than busy spinning when halt is requested Date: Tue, 5 Apr 2016 19:40:12 +0100 [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 31/203 [ Author: popcornmix Email: [email protected] Subject: squash: include ARCH_BCM2708 / ARCH_BCM2709 Date: Wed, 11 Nov 2015 21:01:15 +0000 [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 32/203 [ Author: popcornmix Email: [email protected] Subject: Add dwc_otg driver Date: Wed, 1 May 2013 19:46:17 +0100 Signed-off-by: popcornmix <[email protected]> usb: dwc: fix lockdep false positive Signed-off-by: Kari Suvanto <[email protected]> usb: dwc: fix inconsistent lock state Signed-off-by: Kari Suvanto <[email protected]> Add FIQ patch to dwc_otg driver. Enable with dwc_otg.fiq_fix_enable=1. Should give about 10% more ARM performance. Thanks to Gordon and Costas Avoid dynamic memory allocation for channel lock in USB driver. Thanks ddv2005. Add NAK holdoff scheme. Enabled by default, disable with dwc_otg.nak_holdoff_enable=0. Thanks gsh Make sure we wait for the reset to finish dwc_otg: fix bug in dwc_otg_hcd.c resulting in silent kernel memory corruption, escalating to OOPS under high USB load. dwc_otg: Fix unsafe access of QTD during URB enqueue In dwc_otg_hcd_urb_enqueue during qtd creation, it was possible that the transaction could complete almost immediately after the qtd was assigned to a host channel during URB enqueue, which meant the qtd pointer was no longer valid having been completed and removed. Usually, this resulted in an OOPS during URB submission. By predetermining whether transactions need to be queued or not, this unsafe pointer access is avoided. This bug was only evident on the Pi model A where a device was attached that had no periodic endpoints (e.g. USB pendrive or some wlan devices). dwc_otg: Fix incorrect URB allocation error handling If the memory allocation for a dwc_otg_urb failed, the kernel would OOPS because for some reason a member of the *unallocated* struct was set to zero. Error handling changed to fail correctly. dwc_otg: fix potential use-after-free case in interrupt handler If a transaction had previously aborted, certain interrupts are enabled to track error counts and reset where necessary. On IN endpoints the host generates an ACK interrupt near-simultaneously with completion of transfer. In the case where this transfer had previously had an error, this results in a use-after-free on the QTD memory space with a 1-byte length being overwritten to 0x00. dwc_otg: add handling of SPLIT transaction data toggle errors Previously a data toggle error on packets from a USB1.1 device behind a TT would result in the Pi locking up as the driver never handled the associated interrupt. Patch adds basic retry mechanism and interrupt acknowledgement to cater for either a chance toggle error or for devices that have a broken initial toggle state (FT8U232/FT232BM). dwc_otg: implement tasklet for returning URBs to usbcore hcd layer The dwc_otg driver interrupt handler for transfer completion will spend a very long time with interrupts disabled when a URB is completed - this is because usb_hcd_giveback_urb is called from within the handler which for a USB device driver with complicated processing (e.g. webcam) will take an exorbitant amount of time to complete. This results in missed completion interrupts for other USB packets which lead to them being dropped due to microframe overruns. This patch splits returning the URB to the usb hcd layer into a high-priority tasklet. This will have most benefit for isochronous IN transfers but will also have incidental benefit where multiple periodic devices are active at once. dwc_otg: fix NAK holdoff and allow on split transactions only This corrects a bug where if a single active non-periodic endpoint had at least one transaction in its qh, on frnum == MAX_FRNUM the qh would get skipped and never get queued again. This would result in a silent device until error detection (automatic or otherwise) would either reset the device or flush and requeue the URBs. Additionally the NAK holdoff was enabled for all transactions - this would potentially stall a HS endpoint for 1ms if a previous error state enabled this interrupt and the next response was a NAK. Fix so that only split transactions get held off. dwc_otg: Call usb_hcd_unlink_urb_from_ep with lock held in completion handler usb_hcd_unlink_urb_from_ep must be called with the HCD lock held. Calling it asynchronously in the tasklet was not safe (regression in c4564d4a1a0a9b10d4419e48239f5d99e88d2667). This change unlinks it from the endpoint prior to queueing it for handling in the tasklet, and also adds a check to ensure the urb is OK to be unlinked before doing so. NULL pointer dereference kernel oopses had been observed in usb_hcd_giveback_urb when a USB device was unplugged/replugged during data transfer. This effect was reproduced using automated USB port power control, hundreds of replug events were performed during active transfers to confirm that the problem was eliminated. USB fix using a FIQ to implement split transactions This commit adds a FIQ implementaion that schedules the split transactions using a FIQ so we don't get held off by the interrupt latency of Linux dwc_otg: fix device attributes and avoid kernel warnings on boot dcw_otg: avoid logging function that can cause panics See: https://github.com/raspberrypi/firmware/issues/21 Thanks to cleverca22 for fix dwc_otg: mask correct interrupts after transaction error recovery The dwc_otg driver will unmask certain interrupts on a transaction that previously halted in the error state in order to reset the QTD error count. The various fine-grained interrupt handlers do not consider that other interrupts besides themselves were unmasked. By disabling the two other interrupts only ever enabled in DMA mode for this purpose, we can avoid unnecessary function calls in the IRQ handler. This will also prevent an unneccesary FIQ interrupt from being generated if the FIQ is enabled. dwc_otg: fiq: prevent FIQ thrash and incorrect state passing to IRQ In the case of a transaction to a device that had previously aborted due to an error, several interrupts are enabled to reset the error count when a device responds. This has the side-effect of making the FIQ thrash because the hardware will generate multiple instances of a NAK on an IN bulk/interrupt endpoint and multiple instances of ACK on an OUT bulk/interrupt endpoint. Make the FIQ mask and clear the associated interrupts. Additionally, on non-split transactions make sure that only unmasked interrupts are cleared. This caused a hard-to-trigger but serious race condition when you had the combination of an endpoint awaiting error recovery and a transaction completed on an endpoint - due to the sequencing and timing of interrupts generated by the dwc_otg core, it was possible to confuse the IRQ handler. Fix function tracing dwc_otg: whitespace cleanup in dwc_otg_urb_enqueue dwc_otg: prevent OOPSes during device disconnects The dwc_otg_urb_enqueue function is thread-unsafe. In particular the access of urb->hcpriv, usb_hcd_link_urb_to_ep, dwc_otg_urb->qtd and friends does not occur within a critical section and so if a device was unplugged during activity there was a high chance that the usbcore hub_thread would try to disable the endpoint with partially- formed entries in the URB queue. This would result in BUG() or null pointer dereferences. Fix so that access of urb->hcpriv, enqueuing to the hardware and adding to usbcore endpoint URB lists is contained within a single critical section. dwc_otg: prevent BUG() in TT allocation if hub address is > 16 A fixed-size array is used to track TT allocation. This was previously set to 16 which caused a crash because dwc_otg_hcd_allocate_port would read past the end of the array. This was hit if a hub was plugged in which enumerated as addr > 16, due to previous device resets or unplugs. Also add #ifdef FIQ_DEBUG around hcd->hub_port_alloc[], which grows to a large size if 128 hub addresses are supported. This field is for debug only for tracking which frame an allocate happened in. dwc_otg: make channel halts with unknown state less damaging If the IRQ received a channel halt interrupt through the FIQ with no other bits set, the IRQ would not release the host channel and never complete the URB. Add catchall handling to treat as a transaction error and retry. dwc_otg: fiq_split: use TTs with more granularity This fixes certain issues with split transaction scheduling. - Isochronous multi-packet OUT transactions now hog the TT until they are completed - this prevents hubs aborting transactions if they get a periodic start-split out-of-order - Don't perform TT allocation on non-periodic endpoints - this allows simultaneous use of the TT's bulk/control and periodic transaction buffers This commit will mainly affect USB audio playback. dwc_otg: fix potential sleep while atomic during urb enqueue Fixes a regression introduced with eb1b482a. Kmalloc called from dwc_otg_hcd_qtd_add / dwc_otg_hcd_qtd_create did not always have the GPF_ATOMIC flag set. Force this flag when inside the larger critical section. dwc_otg: make fiq_split_enable imply fiq_fix_enable Failing to set up the FIQ correctly would result in "IRQ 32: nobody cared" errors in dmesg. dwc_otg: prevent crashes on host port disconnects Fix several issues resulting in crashes or inconsistent state if a Model A root port was disconnected. - Clean up queue heads properly in kill_urbs_in_qh_list by removing the empty QHs from the schedule lists - Set the halt status properly to prevent IRQ handlers from using freed memory - Add fiq_split related cleanup for saved registers - Make microframe scheduling reclaim host channels if active during a disconnect - Abort URBs with -ESHUTDOWN status response, informing device drivers so they respond in a more correct fashion and don't try to resubmit URBs - Prevent IRQ handlers from attempting to handle channel interrupts if the associated URB was dequeued (and the driver state was cleared) dwc_otg: prevent leaking URBs during enqueue A dwc_otg_urb would get leaked if the HCD enqueue function failed for any reason. Free the URB at the appropriate points. dwc_otg: Enable NAK holdoff for control split transactions Certain low-speed devices take a very long time to complete a data or status stage of a control transaction, producing NAK responses until they complete internal processing - the USB2.0 spec limit is up to 500mS. This causes the same type of interrupt storm as seen with USB-serial dongles prior to c8edb238. In certain circumstances, usually while booting, this interrupt storm could cause SD card timeouts. dwc_otg: Fix for occasional lockup on boot when doing a USB reset dwc_otg: Don't issue traffic to LS devices in FS mode Issuing low-speed packets when the root port is in full-speed mode causes the root port to stop responding. Explicitly fail when enqueuing URBs to a LS endpoint on a FS bus. Fix ARM architecture issue with local_irq_restore() If local_fiq_enable() is called before a local_irq_restore(flags) where the flags variable has the F bit set, the FIQ will be erroneously disabled. Fixup arch_local_irq_restore to avoid trampling the F bit in CPSR. Also fix some of the hacks previously implemented for previous dwc_otg incarnations. dwc_otg: fiq_fsm: Base commit for driver rewrite This commit removes the previous FIQ fixes entirely and adds fiq_fsm. This rewrite features much more complete support for split transactions and takes into account several OTG hardware bugs. High-speed isochronous transactions are also capable of being performed by fiq_fsm. All driver options have been removed and replaced with: - dwc_otg.fiq_enable (bool) - dwc_otg.fiq_fsm_enable (bool) - dwc_otg.fiq_fsm_mask (bitmask) - dwc_otg.nak_holdoff (unsigned int) Defaults are specified such that fiq_fsm behaves similarly to the previously implemented FIQ fixes. fiq_fsm: Push error recovery into the FIQ when fiq_fsm is used If the transfer associated with a QTD failed due to a bus error, the HCD would retry the transfer up to 3 times (implementing the USB2.0 three-strikes retry in software). Due to the masking mechanism used by fiq_fsm, it is only possible to pass a single interrupt through to the HCD per-transfer. In this instance host channels would fall off the radar because the error reset would function, but the subsequent channel halt would be lost. Push the error count reset into the FIQ handler. fiq_fsm: Implement timeout mechanism For full-speed endpoints with a large packet size, interrupt latency runs the risk of the FIQ starting a transaction too late in a full-speed frame. If the device is still transmitting data when EOF2 for the downstream frame occurs, the hub will disable the port. This change is not reflected in the hub status endpoint and the device becomes unresponsive. Prevent high-bandwidth transactions from being started too late in a frame. The mechanism is not guaranteed: a combination of bit stuffing and hub latency may still result in a device overrunning. fiq_fsm: fix bounce buffer utilisation for Isochronous OUT Multi-packet isochronous OUT transactions were subject to a few bounday bugs. Fix them. Audio playback is now much more robust: however, an issue stands with devices that have adaptive sinks - ALSA plays samples too fast. dwc_otg: Return full-speed frame numbers in HS mode The frame counter increments on every *microframe* in high-speed mode. Most device drivers expect this number to be in full-speed frames - this caused considerable confusion to e.g. snd_usb_audio which uses the frame counter to estimate the number of samples played. fiq_fsm: save PID on completion of interrupt OUT transfers Also add edge case handling for interrupt transports. Note that for periodic split IN, data toggles are unimplemented in the OTG host hardware - it unconditionally accepts any PID. fiq_fsm: add missing case for fiq_fsm_tt_in_use() Certain combinations of bitrate and endpoint activity could result in a periodic transaction erroneously getting started while the previous Isochronous OUT was still active. fiq_fsm: clear hcintmsk for aborted transactions Prevents the FIQ from erroneously handling interrupts on a timed out channel. fiq_fsm: enable by default fiq_fsm: fix dequeues for non-periodic split transactions If a dequeue happened between the SSPLIT and CSPLIT phases of the transaction, the HCD would never receive an interrupt. fiq_fsm: Disable by default fiq_fsm: Handle HC babble errors The HCTSIZ transfer size field raises a babble interrupt if the counter wraps. Handle the resulting interrupt in this case. dwc_otg: fix interrupt registration for fiq_enable=0 Additionally make the module parameter conditional for wherever hcd->fiq_state is touched. fiq_fsm: Enable by default dwc_otg: Fix various issues with root port and transaction errors Process the host port interrupts correctly (and don't trample them). Root port hotplug now functional again. Fix a few thinkos with the transaction error passthrough for fiq_fsm. fiq_fsm: Implement hack for Split Interrupt transactions Hubs aren't too picky about which endpoint we send Control type split transactions to. By treating Interrupt transfers as Control, it is possible to use the non-periodic queue in the OTG core as well as the non-periodic FIFOs in the hub itself. This massively reduces the microframe exclusivity/contention that periodic split transactions otherwise have to enforce. It goes without saying that this is a fairly egregious USB specification violation, but it works. Original idea by Hans Petter Selasky @ FreeBSD.org. dwc_otg: FIQ support on SMP. Set up FIQ stack and handler on Core 0 only. dwc_otg: introduce fiq_fsm_spin(un|)lock() SMP safety for the FIQ relies on register read-modify write cycles being completed in the correct order. Several places in the DWC code modify registers also touched by the FIQ. Protect these by a bare-bones lock mechanism. This also makes it possible to run the FIQ and IRQ handlers on different cores. fiq_fsm: fix build on bcm2708 and bcm2709 platforms dwc_otg: put some barriers back where they should be for UP bcm2709/dwc_otg: Setup FIQ on core 1 if >1 core active dwc_otg: fixup read-modify-write in critical paths Be more careful about read-modify-write on registers that the FIQ also touches. Guard fiq_fsm_spin_lock with fiq_enable check fiq_fsm: Falling out of the state machine isn't fatal This edge case can be hit if the port is disabled while the FIQ is in the middle of a transaction. Make the effects less severe. Also get rid of the useless return value. squash: dwc_otg: Allow to build without SMP usb: core: make overcurrent messages more prominent Hub overcurrent messages are more serious than "debug". Increase loglevel. usb: dwc_otg: Don't use dma_to_virt() Commit 6ce0d20 changes dma_to_virt() which breaks this driver. Open code the old dma_to_virt() implementation to work around this. Limit the use of __bus_to_virt() to cases where transfer_buffer_length is set and transfer_buffer is not set. This is done to increase the chance that this driver will also work on ARCH_BCM2835. transfer_buffer should not be NULL if the length is set, but the comment in the code indicates that there are situations where this might happen. drivers/usb/isp1760/isp1760-hcd.c also has a similar comment pointing to a possible: 'usb storage / SCSI bug'. Signed-off-by: Noralf Trønnes <[email protected]> dwc_otg: Fix crash when fiq_enable=0 dwc_otg: fiq_fsm: Make high-speed isochronous strided transfers work properly Certain low-bandwidth high-speed USB devices (specialist audio devices, compressed-frame webcams) have packet intervals > 1 microframe. Stride these transfers in the FIQ by using the start-of-frame interrupt to restart the channel at the right time. dwc_otg: Force host mode to fix incorrect compute module boards dwc_otg: Add ARCH_BCM2835 support Signed-off-by: Noralf Trønnes <[email protected]> dwc_otg: Simplify FIQ irq number code Dropping ATAGS means we can simplify the FIQ irq number code. Also add error checking on the returned irq number. Signed-off-by: Noralf Trønnes <[email protected]> dwc_otg: Remove duplicate gadget probe/unregister function dwc_otg: Properly set the HFIR Douglas Anderson reported: According to the most up to date version of the dwc2 databook, the FRINT field of the HFIR register should be programmed to: * 125 us * (PHY clock freq for HS) - 1 * 1000 us * (PHY clock freq for FS/LS) - 1 This is opposed to older versions of the doc that claimed it should be: * 125 us * (PHY clock freq for HS) * 1000 us * (PHY clock freq for FS/LS) and reported lower timing jitter on a USB analyser dcw_otg: trim xfer length when buffer larger than allocated size is received dwc_otg: Don't free qh align buffers in atomic context dwc_otg: Enable the hack for Split Interrupt transactions by default dwc_otg.fiq_fsm_mask=0xF has long been a suggestion for users with audio stutters or other USB bandwidth issues. So far we are aware of many success stories but no failure caused by this setting. Make it a default to learn more. See: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=70437 Signed-off-by: popcornmix <[email protected]> dwc_otg: Use kzalloc when suitable [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 33/203 [ Author: popcornmix Email: [email protected] Subject: bcm2708 framebuffer driver Date: Wed, 17 Jun 2015 17:06:34 +0100 Signed-off-by: popcornmix <[email protected]> bcm2708_fb : Implement blanking support using the mailbox property interface bcm2708_fb: Add pan and vsync controls bcm2708_fb: DMA acceleration for fb_copyarea Based on http://www.raspberrypi.org/phpBB3/viewtopic.php?p=62425#p62425 Also used Simon's dmaer_master module as a reference for tweaking DMA settings for better performance. For now busylooping only. IRQ support might be added later. With non-overclocked Raspberry Pi, the performance is ~360 MB/s for simple copy or ~260 MB/s for two-pass copy (used when dragging windows to the right). In the case of using DMA channel 0, the performance improves to ~440 MB/s. For comparison, VFP optimized CPU copy can only do ~114 MB/s in the same conditions (hindered by reading uncached source buffer). Signed-off-by: Siarhei Siamashka <[email protected]> bcm2708_fb: report number of dma copies Add a counter (exported via debugfs) reporting the number of dma copies that the framebuffer driver has done, in order to help evaluate different optimization strategies. Signed-off-by: Luke Diamand <[email protected]> bcm2708_fb: use IRQ for DMA copies The copyarea ioctl() uses DMA to speed things along. This was busy-waiting for completion. This change supports using an interrupt instead for larger transfers. For small transfers, busy-waiting is still likely to be faster. Signed-off-by: Luke Diamand <[email protected]> bcm2708: Make ioctl logging quieter video: fbdev: bcm2708_fb: Don't panic on error No need to panic the kernel if the video driver fails. Just print a message and return an error. Signed-off-by: Noralf Trønnes <[email protected]> fbdev: bcm2708_fb: Add ARCH_BCM2835 support Add Device Tree support. Pass the device to dma_alloc_coherent() in order to get the correct bus address on ARCH_BCM2835. Use the new DMA legacy API header file. Including <mach/platform.h> is not necessary. Signed-off-by: Noralf Trønnes <[email protected]> BCM270x_DT: Add bcm2708-fb device Add bcm2708-fb to Device Tree and don't add the platform device when booting in DT mode. Signed-off-by: Noralf Trønnes <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 34/203 [ Author: Florian Meier Email: [email protected] Subject: dmaengine: Add support for BCM2708 Date: Fri, 22 Nov 2013 14:22:53 +0100 Add support for DMA controller of BCM2708 as used in the Raspberry Pi. Currently it only supports cyclic DMA. Signed-off-by: Florian Meier <[email protected]> dmaengine: expand functionality by supporting scatter/gather transfers sdhci-bcm2708 and dma.c: fix for LITE channels DMA: fix cyclic LITE length overflow bug dmaengine: bcm2708: Remove chancnt affectations Mirror bcm2835-dma.c commit 9eba5536a7434c69d8c185d4bd1c70734d92287d: chancnt is already filled by dma_async_device_register, which uses the channel list to know how much channels there is. Since it's already filled, we can safely remove it from the drivers' probe function. Signed-off-by: Noralf Trønnes <[email protected]> dmaengine: bcm2708: overwrite dreq only if it is not set dreq is set when the DMA channel is fetched from Device Tree. slave_id is set using dmaengine_slave_config(). Only overwrite dreq with slave_id if it is not set. dreq/slave_id in the cyclic DMA case is not touched, because I don't have hardware to test with. Signed-off-by: Noralf Trønnes <[email protected]> dmaengine: bcm2708: do device registration in the board file Don't register the device in the driver. Do it in the board file. Signed-off-by: Noralf Trønnes <[email protected]> dmaengine: bcm2708: don't restrict DT support to ARCH_BCM2835 Both ARCH_BCM2835 and ARCH_BCM270x are built with OF now. Add Device Tree support to the non ARCH_BCM2835 case. Use the same driver name regardless of architecture. Signed-off-by: Noralf Trønnes <[email protected]> BCM270x_DT: add bcm2835-dma entry Add Device Tree entry for bcm2835-dma. The entry doesn't contain any resources since they are handled by the arch/arm/mach-bcm270x/dma.c driver. In non-DT mode, don't add the device in the board file. Signed-off-by: Noralf Trønnes <[email protected]> bcm2708-dmaengine: Add debug options BCM270x: Add memory and irq resources to dmaengine device and DT Prepare for merging of the legacy DMA API arch driver dma.c with bcm2708-dmaengine by adding memory and irq resources both to platform file device and Device Tree node. Don't use BCM_DMAMAN_DRIVER_NAME so we don't have to include mach/dma.h Signed-off-by: Noralf Trønnes <[email protected]> dmaengine: bcm2708: Merge with arch dma.c driver and disable dma.c Merge the legacy DMA API driver with bcm2708-dmaengine. This is done so we can use bcm2708_fb on ARCH_BCM2835 (mailbox driver is also needed). Changes to the dma.c code: - Use BIT() macro. - Cutdown some comments to one line. - Add mutex to vc_dmaman and use this, since the dev lock is locked during probing of the engine part. - Add global g_dmaman variable since drvdata is used by the engine part. - Restructure for readability: vc_dmaman_chan_alloc() vc_dmaman_chan_free() bcm_dma_chan_free() - Restructure bcm_dma_chan_alloc() to simplify error handling. - Use device irq resources instead of hardcoded bcm_dma_irqs table. - Remove dev_dmaman_register() and code it directly. - Remove dev_dmaman_deregister() and code it directly. - Simplify bcm_dmaman_probe() using devm_* functions. - Get dmachans from DT if available. - Keep 'dma.dmachans' module argument name for backwards compatibility. Make it available on ARCH_BCM2835 as well. Signed-off-by: Noralf Trønnes <[email protected]> dmaengine: bcm2708: set residue_granularity field bcm2708-dmaengine supports residue reporting at burst level but didn't report this via the residue_granularity field. Without this field set properly we get playback issues with I2S cards. dmaengine: bcm2708-dmaengine: Fix memory leak when stopping a running transfer bcm2708-dmaengine: Use more DMA channels (but not 12) 1) Only the bcm2708_fb drivers uses the legacy DMA API, and it requires a BULK-capable channel, so all other types (FAST, NORMAL and LITE) can be made available to the regular DMA API. 2) DMA channels 11-14 share an interrupt. The driver can't handle this, so don't use channels 12-14 (12 was used, probably because it appears to have an interrupt, but in reality that interrupt is for activity on ANY channel). This may explain a lockup encountered when running out of DMA channels. The combined effect of this patch is to leave 7 DMA channels available + channel 0 for bcm2708_fb via the legacy API. See: https://github.com/raspberrypi/linux/issues/1110 https://github.com/raspberrypi/linux/issues/1108 dmaengine: bcm2708: Make legacy API available for bcm2835-dma bcm2708_fb uses the legacy DMA API, so in order to start using bcm2835-dma, bcm2835-dma has to support the legacy API. Make this possible by exporting bcm_dmaman_probe() and bcm_dmaman_remove(). Signed-off-by: Noralf Trønnes <[email protected]> dmaengine: bcm2708: Change DT compatible string Both bcm2835-dma and bcm2708-dmaengine have the same compatible string. So change compatible to "brcm,bcm2708-dma". Signed-off-by: Noralf Trønnes <[email protected]> dmaengine: bcm2708: Remove driver but keep legacy API Dropping non-DT support means we don't need this driver, but we still need the legacy DMA API. Signed-off-by: Noralf Trønnes <[email protected]> bcm2708-dmaengine - Fix arm64 portability/build issues [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 35/203 [ Author: gellert Email: [email protected] Subject: MMC: added alternative MMC driver Date: Fri, 15 Aug 2014 16:35:06 +0100 mmc: Disable CMD23 transfers on all cards Pending wire-level investigation of these types of transfers and associated errors on bcm2835-mmc, disable for now. Fallback of CMD18/CMD25 transfers will be used automatically by the MMC layer. Reported/Tested-by: Gellert Weisz <[email protected]> mmc: bcm2835-mmc: enable DT support for all architectures Both ARCH_BCM2835 and ARCH_BCM270x are built with OF now. Enable Device Tree support for all architectures. Signed-off-by: Noralf Trønnes <[email protected]> mmc: bcm2835-mmc: fix probe error handling Probe error handling is broken in several places. Simplify error handling by using device managed functions. Replace pr_{err,info} with dev_{err,info}. Signed-off-by: Noralf Trønnes <[email protected]> bcm2835-mmc: Add locks when accessing sdhost registers bcm2835-mmc: Add range of debug options for slowing things down bcm2835-mmc: Add option to disable some delays bcm2835-mmc: Add option to disable MMC_QUIRK_BLK_NO_CMD23 bcm2835-mmc: Default to disabling MMC_QUIRK_BLK_NO_CMD23 bcm2835-mmc: Adding overclocking option Allow a different clock speed to be substitued for a requested 50MHz. This option is exposed using the "overclock_50" DT parameter. Note that the mmc interface is restricted to EVEN integer divisions of 250MHz, and the highest sensible option is 63 (250/4 = 62.5), the next being 125 (250/2) which is much too high. Use at your own risk. bcm2835-mmc: Round up the overclock, so 62 works for 62.5Mhz Also only warn once for each overclock setting. mmc: bcm2835-mmc: Make available on ARCH_BCM2835 Make the bcm2835-mmc driver available for use on ARCH_BCM2835. Signed-off-by: Noralf Trønnes <[email protected]> BCM270x_DT: add bcm2835-mmc entry Add Device Tree entry for bcm2835-mmc. In non-DT mode, don't add the device in the board file. Signed-off-by: Noralf Trønnes <[email protected]> bcm2835-mmc: Don't overwrite MMC capabilities from DT bcm2835-mmc: Don't override bus width capabilities from devicetree Take out the force setting of the MMC_CAP_4_BIT_DATA host capability so that the result read from devicetree via mmc_of_parse() is preserved. bcm2835-mmc: Only claim one DMA channel With both MMC controllers enabled there are few DMA channels left. The bcm2835-mmc driver only uses DMA in one direction at a time, so it doesn't need to claim two channels. See: https://github.com/raspberrypi/linux/issues/1327 Signed-off-by: Phil Elwell <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 36/203 [ Author: Phil Elwell Email: [email protected] Subject: Adding bcm2835-sdhost driver, and an overlay to enable it Date: Wed, 25 Mar 2015 17:49:47 +0000 BCM2835 has two SD card interfaces. This driver uses the other one. bcm2835-sdhost: Error handling fix, and code clarification bcm2835-sdhost: Adding overclocking option Allow a different clock speed to be substitued for a requested 50MHz. This option is exposed using the "overclock_50" DT parameter. Note that the sdhost interface is restricted to integer divisions of core_freq, and the highest sensible option for a core_freq of 250MHz is 84 (250/3 = 83.3MHz), the next being 125 (250/2) which is much too high. Use at your own risk. bcm2835-sdhost: Round up the overclock, so 62 works for 62.5Mhz Also only warn once for each overclock setting. bcm2835-sdhost: Improve error handling and recovery 1) Expose the hw_reset method to the MMC framework, removing many internal calls by the driver. 2) Reduce overclock setting on error. 3) Increase timeout to cope with high capacity cards. 4) Add properties and parameters to control pio_limit and debug. 5) Reduce messages at probe time. bcm2835-sdhost: Further improve overclock back-off bcm2835-sdhost: Clear HBLC for PIO mode Also update pio_limit default in overlay README. bcm2835-sdhost: Add the ERASE capability See: https://github.com/raspberrypi/linux/issues/1076 bcm2835-sdhost: Ignore CRC7 for MMC CMD1 It seems that the sdhost interface returns CRC7 errors for CMD1, which is the MMC-specific SEND_OP_COND. Returning these errors to the MMC layer causes a downward spiral, but ignoring them seems to be harmless. bcm2835-mmc/sdhost: Remove ARCH_BCM2835 differences The bcm2835-mmc driver (and -sdhost driver that copied from it) contains code to handle SDIO interrupts in a threaded interrupt handler rather than waking the MMC framework thread. The change follows a patch from Russell King that adds the facility as the preferred way of working. However, the new code path is only present in ARCH_BCM2835 builds, which I have taken to be a way of testing the waters rather than making the change across the board; I can't see any technical reason why it wouldn't be enabled for MACH_BCM270X builds. So this patch standardises on the ARCH_BCM2835 code, removing the old code paths. bcm2835-sdhost: Don't log timeout errors unless debug=1 The MMC card-discovery process generates timeouts. This is expected behaviour, so reporting it to the user serves no purpose. Suppress the reporting of timeout errors unless the debug flag is on. bcm2835-sdhost: Add workaround for odd behaviour on some cards For reasons not understood, the sdhost driver fails when reading sectors very near the end of some SD cards. The problem could be related to the similar issue that reading the final sector of any card as part of a multiple read never completes, and the workaround is an extension of the mechanism introduced to solve that problem which ensures those sectors are always read singly. bcm2835-sdhost: Major revision This is a significant revision of the bcm2835-sdhost driver. It improves on the original in a number of ways: 1) Through the use of CMD23 for reads it appears to avoid problems reading some sectors on certain high speed cards. 2) Better atomicity to prevent crashes. 3) Higher performance. 4) Activity logging included, for easier diagnosis in the event of a problem. Signed-off-by: Phil Elwell <[email protected]> bcm2835-sdhost: Restore ATOMIC flag to PIO sg mapping Allocation problems have been seen in a wireless driver, and this is the only change which might have been responsible. SQUASH: bcm2835-sdhost: Only claim one DMA channel With both MMC controllers enabled there are few DMA channels left. The bcm2835-sdhost driver only uses DMA in one direction at a time, so it doesn't need to claim two channels. See: https://github.com/raspberrypi/linux/issues/1327 Signed-off-by: Phil Elwell <[email protected]> bcm2835-sdhost: Workaround for "slow" sectors Some cards have been seen to cause timeouts after certain sectors are read. This workaround enforces a minimum delay between the stop after reading one of those sectors and a subsequent data command. Using CMD23 (SET_BLOCK_COUNT) avoids this problem, so good cards will not be penalised by this workaround. Signed-off-by: Phil Elwell <[email protected]> bcm2835-sdhost: Firmware manages the clock divisor The bcm2835-sdhost driver hands control of the CDIV clock divisor register to matching firmware, allowing it to adjust to a changing core clock. This removes the need to use the performance governor or to enable io_is_busy on the on-demand governor in order to get the best SD performance. N.B. As SD clocks must be an integer divisor of the core clock, it is possible that the SD clock for "turbo" mode can be different (even lower) than "normal" mode. Signed-off-by: Phil Elwell <[email protected]> bcm2835-sdhost: Reset the clock in task context Since reprogramming the clock can now involve a round-trip to the firmware it must not be done at atomic context, and a tasklet is not a task. Signed-off-by: Phil Elwell <[email protected]> bcm2835-sdhost: Don't exit cmd wait loop on error The FAIL flag can be set in the CMD register before command processing is complete, leading to spurious "failed to complete" errors. This has the effect of promoting harmless CRC7 errors during CMD1 processing into errors that can delay and even prevent booting. Also: 1) Convert the last KERN_ERROR message in the register dumping to KERN_INFO. 2) Remove an unnecessary reset call from bcm2835_sdhost_add_host. See: https://github.com/raspberrypi/linux/pull/1492 Signed-off-by: Phil Elwell <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 37/203 [ Author: Phil Elwell Email: [email protected] Subject: mmc: Add MMC_QUIRK_ERASE_BROKEN for some cards Date: Wed, 11 May 2016 12:50:33 +0100 Some SD cards have been found that corrupt data when small blocks are erased. Add a quirk to indicate that ERASE should not be used, and set it for cards of that type. Signed-off-by: Phil Elwell <[email protected]> mmc: Apply QUIRK_BROKEN_ERASE to other capacities Signed-off-by: Phil Elwell <[email protected]> mmc: Add card_quirks module parameter, log quirks Use mmc_block.card_quirks to override the quirks for all SD or MMC cards. The value is a bitfield using the bit positions defined in include/linux/mmc/card.h. If the module parameter is placed in the kernel command line (or bootargs) stored on the card then, assuming the device only has one SD card interface, the override effectively becomes card-specific. Signed-off-by: Phil Elwell <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 38/203 [ Author: popcornmix Email: [email protected] Subject: cma: Add vc_cma driver to enable use of CMA Date: Wed, 3 Jul 2013 00:31:47 +0100 Signed-off-by: popcornmix <[email protected]> vc_cma: Make the vc_cma area the default contiguous DMA area vc_cma: Provide empty functions when module is not built Providing empty functions saves the users from guarding the function call with an #if clause. Move __init markings from prototypes to functions. Signed-off-by: Noralf Trønnes <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 39/203 [ Author: popcornmix Email: [email protected] Subject: bcm2708: alsa sound driver Date: Mon, 26 Mar 2012 22:15:50 +0100 Signed-off-by: popcornmix <[email protected]> alsa: add mmap support and some cleanups to bcm2835 ALSA driver snd-bcm2835: Add support for spdif/hdmi passthrough This adds a dedicated subdevice which can be used for passthrough of non-audio formats (ie encoded a52) through the hdmi audio link. In addition to this driver extension an appropriate card config is required to make alsa-lib support the AES parameters for this device. snd-bcm2708: Add mutex, improve logging Fix for ALSA driver crash Avoids an issue when closing and opening vchiq where a message can arrive before service handle has been written alsa: reduce severity of expected warning message snd-bcm2708: Fix dmesg spam for non-error case alsa: Ensure mutexes are released through error paths alsa: Make interrupted close paths quieter BCM270x: Add onboard sound device to Device Tree Add Device Tree support to alsa driver. Add device to Device Tree. Don't add platform devices when booting in DT mode. Signed-off-by: Noralf Trønnes <[email protected]> bcm2835: access controls under the audio mutex I don't think the ALSA framework provides any kind of automatic synchronization within the control callbacks. We most likely need to ensure this manually, so add locking around all access to shared mutable data. In particular, bcm2835_audio_set_ctls() should probably always be called under our own audio lock. snd-bcm2835: Don't allow responses from VC to be interrupted by user signals There should always be a response, and retry after a signal interruption is not handled, so don't report we are interruptible. See: https://github.com/raspberrypi/linux/issues/1560 snd-bcm2835: Use bcm2835_hw params in preallocate [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 40/203 [ Author: popcornmix Email: [email protected] Subject: bcm2708 vchiq driver Date: Tue, 2 Jul 2013 23:42:01 +0100 Signed-off-by: popcornmix <[email protected]> vchiq: create_pagelist copes with vmalloc memory Signed-off-by: Daniel Stone <[email protected]> vchiq: fix the shim message release Signed-off-by: Daniel Stone <[email protected]> vchiq: export additional symbols Signed-off-by: Daniel Stone <[email protected]> VCHIQ: Make service closure fully synchronous (drv) This is one half of a two-part patch, the other half of which is to the vchiq_lib user library. With these patches, calls to vchiq_close_service and vchiq_remove_service won't return until any associated callbacks have been delivered to the callback thread. VCHIQ: Add per-service tracing The new service option VCHIQ_SERVICE_OPTION_TRACE is a boolean that toggles tracing for the specified service. This commit also introduces vchi_service_set_option and the associated option VCHI_SERVICE_OPTION_TRACE. vchiq: Make the synchronous-CLOSE logic more tolerant vchiq: Move logging control into debugfs vchiq: Take care of a corner case tickled by VCSM Closing a connection that isn't fully open requires care, since one side does not know the other side's port number. Code was present to handle the case where a CLOSE is sent immediately after an OPEN, i.e. before the OPENACK has been received, but this was incorrectly being used when an OPEN from a client using port 0 was rejected. (In the observed failure, the host was attempting to use the VCSM service, which isn't present in the 'cutdown' firmware. The failure was intermittent because sometimes the keepalive service would grab port 0.) This case can be distinguished because the client's remoteport will still be VCHIQ_PORT_FREE, and the srvstate will be OPENING. Either condition is sufficient to differentiate it from the special case described above. vchiq: Avoid high load when blocked and unkillable vchiq: Include SIGSTOP and SIGCONT in list of signals not-masked by vchiq to allow gdb to work vchiq_arm: Complete support for SYNCHRONOUS mode vchiq: Remove inline from suspend/resume vchiq: Allocation does not need to be atomic vchiq: Fix wrong condition check The log level is checked from within the log call. Remove the check in the call. Signed-off-by: Pranith Kumar <[email protected]> BCM270x: Add vchiq device to platform file and Device Tree Prepare to turn the vchiq module into a driver. Signed-off-by: Noralf Trønnes <[email protected]> bcm2708: vchiq: Add Device Tree support Turn vchiq into a driver and stop hardcoding resources. Use devm_* functions in probe path to simplify cleanup. A global variable is used to hold the register address. This is done to keep this patch as small as possible. Also make available on ARCH_BCM2835. Based on work by Lubomir Rintel. Signed-off-by: Noralf Trønnes <[email protected]> vchiq: Change logging level for inbound data vchiq_arm: Two cacheing fixes 1) Make fragment size vary with cache line size Without this patch, non-cache-line-aligned transfers may corrupt (or be corrupted by) adjacent data structures. Both ARM and VC need to be updated to enable this feature. This is ensured by having the loader apply a new DT parameter - cache-line-size. The existence of this parameter guarantees that the kernel is capable, and the parameter will only be modified from the safe default if the loader is capable. 2) Flush/invalidate vmalloc'd memory, and invalidate after reads vchiq: fix NULL pointer dereference when closing driver The following code run as root will cause a null pointer dereference oops: int fd = open("/dev/vc-cma", O_RDONLY); if (fd < 0) err(1, "open failed"); (void)close(fd); [ 1704.877721] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 1704.877725] pgd = b899c000 [ 1704.877736] [00000000] *pgd=37fab831, *pte=00000000, *ppte=00000000 [ 1704.877748] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 1704.877765] Modules linked in: evdev i2c_bcm2708 uio_pdrv_genirq uio [ 1704.877774] CPU: 2 PID: 3656 Comm: stress-ng-fstat Not tainted 3.19.1-12-generic-bcm2709 #12-Ubuntu [ 1704.877777] Hardware name: BCM2709 [ 1704.877783] task: b8ab9b00 ti: b7e68000 task.ti: b7e68000 [ 1704.877798] PC is at __down_interruptible+0x50/0xec [ 1704.877806] LR is at down_interruptible+0x5c/0x68 [ 1704.877813] pc : [<80630ee8>] lr : [<800704b0>] psr: 60080093 sp : b7e69e50 ip : b7e69e88 fp : b7e69e84 [ 1704.877817] r10: b88123c8 r9 : 00000010 r8 : 00000001 [ 1704.877822] r7 : b8ab9b00 r6 : 7fffffff r5 : 80a1cc34 r4 : 80a1cc34 [ 1704.877826] r3 : b7e69e50 r2 : 00000000 r1 : 00000000 r0 : 80a1cc34 [ 1704.877833] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1704.877838] Control: 10c5387d Table: 3899c06a DAC: 00000015 [ 1704.877843] Process do-oops (pid: 3656, stack limit = 0xb7e68238) [ 1704.877848] Stack: (0xb7e69e50 to 0xb7e6a000) [ 1704.877856] 9e40: 80a1cc3c 00000000 00000010 b88123c8 [ 1704.877865] 9e60: b7e69e84 80a1cc34 fff9fee9 ffffffff b7e68000 00000009 b7e69ea4 b7e69e88 [ 1704.877874] 9e80: 800704b0 80630ea4 fff9fee9 60080013 80a1cc28 fff9fee9 b7e69edc b7e69ea8 [ 1704.877884] 9ea0: 8040f558 80070460 fff9fee9 ffffffff 00000000 00000000 00000009 80a1cb7c [ 1704.877893] 9ec0: 00000000 80a1cb7c 00000000 00000010 b7e69ef4 b7e69ee0 803e1ba4 8040f514 [ 1704.877902] 9ee0: 00000e48 80a1cb7c b7e69f14 b7e69ef8 803e1c9c 803e1b74 b88123c0 b92acb18 [ 1704.877911] 9f00: b8812790 b8d815d8 b7e69f24 b7e69f18 803e2250 803e1bc8 b7e69f5c b7e69f28 [ 1704.877921] 9f20: 80167bac 803e222c 00000000 00000000 b7e69f54 b8ab9ffc 00000000 8098c794 [ 1704.877930] 9f40: b8ab9b00 8000efc4 b7e68000 00000000 b7e69f6c b7e69f60 80167d6c 80167b28 [ 1704.877939] 9f60: b7e69f8c b7e69f70 80047d38 80167d60 b7e68000 b7e68010 8000efc4 b7e69fb0 [ 1704.877949] 9f80: b7e69fac b7e69f90 80012820 80047c84 01155490 011549a8 00000001 00000006 [ 1704.877957] 9fa0: 00000000 b7e69fb0 8000ee5c 80012790 00000000 353d8c0f 7efc4308 00000000 [ 1704.877966] 9fc0: 01155490 011549a8 00000001 00000006 00000000 00000000 76cf3ba0 00000003 [ 1704.877975] 9fe0: 00000000 7efc42e4 0002272f 76e2ed66 60080030 00000003 00000000 00000000 [ 1704.877998] [<80630ee8>] (__down_interruptible) from [<800704b0>] (down_interruptible+0x5c/0x68) [ 1704.878015] [<800704b0>] (down_interruptible) from [<8040f558>] (vchiu_queue_push+0x50/0xd8) [ 1704.878032] [<8040f558>] (vchiu_queue_push) from [<803e1ba4>] (send_worker_msg+0x3c/0x54) [ 1704.878045] [<803e1ba4>] (send_worker_msg) from [<803e1c9c>] (vc_cma_set_reserve+0xe0/0x1c4) [ 1704.878057] [<803e1c9c>] (vc_cma_set_reserve) from [<803e2250>] (vc_cma_release+0x30/0x38) [ 1704.878069] [<803e2250>] (vc_cma_release) from [<80167bac>] (__fput+0x90/0x1e0) [ 1704.878082] [<80167bac>] (__fput) from [<80167d6c>] (____fput+0x18/0x1c) [ 1704.878094] [<80167d6c>] (____fput) from [<80047d38>] (task_work_run+0xc0/0xf8) [ 1704.878109] [<80047d38>] (task_work_run) from [<80012820>] (do_work_pending+0x9c/0xc4) [ 1704.878123] [<80012820>] (do_work_pending) from [<8000ee5c>] (work_pending+0xc/0x20) [ 1704.878133] Code: e50b1034 e3a01000 e50b2030 e580300c (e5823000) ..the fix is to ensure that we have actually initialized the queue before we attempt to push any items onto it. This occurs if we do an open() followed by a close() without any activity in between. Signed-off-by: Colin Ian King <[email protected]> vchiq_arm: Sort out the vmalloc case See: https://github.com/raspberrypi/linux/issues/1055 vchiq: hack: Add include depecated dma include file vchiq_arm: Tweak the logging output Signed-off-by: Phil Elwell <[email protected]> vchiq_arm: Access the dequeue_pending flag locked Reading through this code looking for another problem (now found in userland) the use of dequeue_pending outside a lock didn't seem safe. Signed-off-by: Phil Elwell <[email protected]> vchiq_arm: Service callbacks must not fail Service callbacks are not allowed to return an error. The internal callback that delivers events and messages to user tasks does not enqueue them if the service is closing, but this is not an error and should not be reported as such. Signed-off-by: Phil Elwell <[email protected]> vchiq_arm: do not use page_cache_release(page) macro (#1403) This macro is gone since 1fa64f198b9f8d6ec0f7aec7c18dc94684391140. Signed-off-by: Slawomir Stepien <[email protected]> vchiq: Upate to match get_user_pages prototype vchiq_arm: Add completion records under the mutex An issue was observed when flushing openmax components which generate a large number of messages returning buffers to host. We occasionally found a duplicate message from 16 messages prior, resulting in a buffer returned twice. While only one thread adds completions, without the mutex you don't get the protection of the automatic memory barrier you get with synchronisation objects. Signed-off-by: Phil Elwell <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 41/203 [ Author: popcornmix Email: [email protected] Subject: vc_mem: Add vc_mem driver Date: Wed, 17 Jun 2015 16:07:06 +0100 Signed-off-by: popcornmix <[email protected]> BCM270x: Move vc_mem Make the vc_mem module available for ARCH_BCM2835 by moving it. Signed-off-by: Noralf Trønnes <[email protected]> [Xulin: Original patch taken from https://github.com/raspberrypi/linux.git branch rpi-4.8.y] Signed-off-by: Xulin Sun <[email protected]> ] 42/203 [ Author: Tim Gover Email: [email protected] Subject: vcsm: VideoCore shared memory service for BCM2835 Date: Tue, 22 Jul 2014 15:41:04 +0100 Add experimental support for the VideoCore shared memory service. This allows user processes to allocate memory from VideoCore's GPU relocatable heap and mmap the buffers. Additionally, the memory handles can passed to other VideoCore services such as MMAL, OpenMax and DispmanX TODO * This driver was originally released for BCM28155 which has a different cache architecture to BCM2835. Consequently, in this release only uncached mappings are suppor…

Signed-off-by: popcornmix <[email protected]> vchiq: create_pagelist copes with vmalloc memory Signed-off-by: Daniel Stone <[email protected]> vchiq: fix the shim message release Signed-off-by: Daniel Stone <[email protected]> vchiq: export additional symbols Signed-off-by: Daniel Stone <[email protected]> VCHIQ: Make service closure fully synchronous (drv) This is one half of a two-part patch, the other half of which is to the vchiq_lib user library. With these patches, calls to vchiq_close_service and vchiq_remove_service won't return until any associated callbacks have been delivered to the callback thread. VCHIQ: Add per-service tracing The new service option VCHIQ_SERVICE_OPTION_TRACE is a boolean that toggles tracing for the specified service. This commit also introduces vchi_service_set_option and the associated option VCHI_SERVICE_OPTION_TRACE. vchiq: Make the synchronous-CLOSE logic more tolerant vchiq: Move logging control into debugfs vchiq: Take care of a corner case tickled by VCSM Closing a connection that isn't fully open requires care, since one side does not know the other side's port number. Code was present to handle the case where a CLOSE is sent immediately after an OPEN, i.e. before the OPENACK has been received, but this was incorrectly being used when an OPEN from a client using port 0 was rejected. (In the observed failure, the host was attempting to use the VCSM service, which isn't present in the 'cutdown' firmware. The failure was intermittent because sometimes the keepalive service would grab port 0.) This case can be distinguished because the client's remoteport will still be VCHIQ_PORT_FREE, and the srvstate will be OPENING. Either condition is sufficient to differentiate it from the special case described above. vchiq: Avoid high load when blocked and unkillable vchiq: Include SIGSTOP and SIGCONT in list of signals not-masked by vchiq to allow gdb to work vchiq_arm: Complete support for SYNCHRONOUS mode vchiq: Remove inline from suspend/resume vchiq: Allocation does not need to be atomic vchiq: Fix wrong condition check The log level is checked from within the log call. Remove the check in the call. Signed-off-by: Pranith Kumar <[email protected]> BCM270x: Add vchiq device to platform file and Device Tree Prepare to turn the vchiq module into a driver. Signed-off-by: Noralf Trønnes <[email protected]> bcm2708: vchiq: Add Device Tree support Turn vchiq into a driver and stop hardcoding resources. Use devm_* functions in probe path to simplify cleanup. A global variable is used to hold the register address. This is done to keep this patch as small as possible. Also make available on ARCH_BCM2835. Based on work by Lubomir Rintel. Signed-off-by: Noralf Trønnes <[email protected]> vchiq: Change logging level for inbound data vchiq_arm: Two cacheing fixes 1) Make fragment size vary with cache line size Without this patch, non-cache-line-aligned transfers may corrupt (or be corrupted by) adjacent data structures. Both ARM and VC need to be updated to enable this feature. This is ensured by having the loader apply a new DT parameter - cache-line-size. The existence of this parameter guarantees that the kernel is capable, and the parameter will only be modified from the safe default if the loader is capable. 2) Flush/invalidate vmalloc'd memory, and invalidate after reads vchiq: fix NULL pointer dereference when closing driver The following code run as root will cause a null pointer dereference oops: int fd = open("/dev/vc-cma", O_RDONLY); if (fd < 0) err(1, "open failed"); (void)close(fd); [ 1704.877721] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 1704.877725] pgd = b899c000 [ 1704.877736] [00000000] *pgd=37fab831, *pte=00000000, *ppte=00000000 [ 1704.877748] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 1704.877765] Modules linked in: evdev i2c_bcm2708 uio_pdrv_genirq uio [ 1704.877774] CPU: 2 PID: 3656 Comm: stress-ng-fstat Not tainted 3.19.1-12-generic-bcm2709 #12-Ubuntu [ 1704.877777] Hardware name: BCM2709 [ 1704.877783] task: b8ab9b00 ti: b7e68000 task.ti: b7e68000 [ 1704.877798] PC is at __down_interruptible+0x50/0xec [ 1704.877806] LR is at down_interruptible+0x5c/0x68 [ 1704.877813] pc : [<80630ee8>] lr : [<800704b0>] psr: 60080093 sp : b7e69e50 ip : b7e69e88 fp : b7e69e84 [ 1704.877817] r10: b88123c8 r9 : 00000010 r8 : 00000001 [ 1704.877822] r7 : b8ab9b00 r6 : 7fffffff r5 : 80a1cc34 r4 : 80a1cc34 [ 1704.877826] r3 : b7e69e50 r2 : 00000000 r1 : 00000000 r0 : 80a1cc34 [ 1704.877833] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1704.877838] Control: 10c5387d Table: 3899c06a DAC: 00000015 [ 1704.877843] Process do-oops (pid: 3656, stack limit = 0xb7e68238) [ 1704.877848] Stack: (0xb7e69e50 to 0xb7e6a000) [ 1704.877856] 9e40: 80a1cc3c 00000000 00000010 b88123c8 [ 1704.877865] 9e60: b7e69e84 80a1cc34 fff9fee9 ffffffff b7e68000 00000009 b7e69ea4 b7e69e88 [ 1704.877874] 9e80: 800704b0 80630ea4 fff9fee9 60080013 80a1cc28 fff9fee9 b7e69edc b7e69ea8 [ 1704.877884] 9ea0: 8040f558 80070460 fff9fee9 ffffffff 00000000 00000000 00000009 80a1cb7c [ 1704.877893] 9ec0: 00000000 80a1cb7c 00000000 00000010 b7e69ef4 b7e69ee0 803e1ba4 8040f514 [ 1704.877902] 9ee0: 00000e48 80a1cb7c b7e69f14 b7e69ef8 803e1c9c 803e1b74 b88123c0 b92acb18 [ 1704.877911] 9f00: b8812790 b8d815d8 b7e69f24 b7e69f18 803e2250 803e1bc8 b7e69f5c b7e69f28 [ 1704.877921] 9f20: 80167bac 803e222c 00000000 00000000 b7e69f54 b8ab9ffc 00000000 8098c794 [ 1704.877930] 9f40: b8ab9b00 8000efc4 b7e68000 00000000 b7e69f6c b7e69f60 80167d6c 80167b28 [ 1704.877939] 9f60: b7e69f8c b7e69f70 80047d38 80167d60 b7e68000 b7e68010 8000efc4 b7e69fb0 [ 1704.877949] 9f80: b7e69fac b7e69f90 80012820 80047c84 01155490 011549a8 00000001 00000006 [ 1704.877957] 9fa0: 00000000 b7e69fb0 8000ee5c 80012790 00000000 353d8c0f 7efc4308 00000000 [ 1704.877966] 9fc0: 01155490 011549a8 00000001 00000006 00000000 00000000 76cf3ba0 00000003 [ 1704.877975] 9fe0: 00000000 7efc42e4 0002272f 76e2ed66 60080030 00000003 00000000 00000000 [ 1704.877998] [<80630ee8>] (__down_interruptible) from [<800704b0>] (down_interruptible+0x5c/0x68) [ 1704.878015] [<800704b0>] (down_interruptible) from [<8040f558>] (vchiu_queue_push+0x50/0xd8) [ 1704.878032] [<8040f558>] (vchiu_queue_push) from [<803e1ba4>] (send_worker_msg+0x3c/0x54) [ 1704.878045] [<803e1ba4>] (send_worker_msg) from [<803e1c9c>] (vc_cma_set_reserve+0xe0/0x1c4) [ 1704.878057] [<803e1c9c>] (vc_cma_set_reserve) from [<803e2250>] (vc_cma_release+0x30/0x38) [ 1704.878069] [<803e2250>] (vc_cma_release) from [<80167bac>] (__fput+0x90/0x1e0) [ 1704.878082] [<80167bac>] (__fput) from [<80167d6c>] (____fput+0x18/0x1c) [ 1704.878094] [<80167d6c>] (____fput) from [<80047d38>] (task_work_run+0xc0/0xf8) [ 1704.878109] [<80047d38>] (task_work_run) from [<80012820>] (do_work_pending+0x9c/0xc4) [ 1704.878123] [<80012820>] (do_work_pending) from [<8000ee5c>] (work_pending+0xc/0x20) [ 1704.878133] Code: e50b1034 e3a01000 e50b2030 e580300c (e5823000) ..the fix is to ensure that we have actually initialized the queue before we attempt to push any items onto it. This occurs if we do an open() followed by a close() without any activity in between. Signed-off-by: Colin Ian King <[email protected]> vchiq_arm: Sort out the vmalloc case See: raspberrypi/linux#1055 vchiq: hack: Add include depecated dma include file

Signed-off-by: popcornmix <[email protected]> vchiq: create_pagelist copes with vmalloc memory Signed-off-by: Daniel Stone <[email protected]> vchiq: fix the shim message release Signed-off-by: Daniel Stone <[email protected]> vchiq: export additional symbols Signed-off-by: Daniel Stone <[email protected]> VCHIQ: Make service closure fully synchronous (drv) This is one half of a two-part patch, the other half of which is to the vchiq_lib user library. With these patches, calls to vchiq_close_service and vchiq_remove_service won't return until any associated callbacks have been delivered to the callback thread. VCHIQ: Add per-service tracing The new service option VCHIQ_SERVICE_OPTION_TRACE is a boolean that toggles tracing for the specified service. This commit also introduces vchi_service_set_option and the associated option VCHI_SERVICE_OPTION_TRACE. vchiq: Make the synchronous-CLOSE logic more tolerant vchiq: Move logging control into debugfs vchiq: Take care of a corner case tickled by VCSM Closing a connection that isn't fully open requires care, since one side does not know the other side's port number. Code was present to handle the case where a CLOSE is sent immediately after an OPEN, i.e. before the OPENACK has been received, but this was incorrectly being used when an OPEN from a client using port 0 was rejected. (In the observed failure, the host was attempting to use the VCSM service, which isn't present in the 'cutdown' firmware. The failure was intermittent because sometimes the keepalive service would grab port 0.) This case can be distinguished because the client's remoteport will still be VCHIQ_PORT_FREE, and the srvstate will be OPENING. Either condition is sufficient to differentiate it from the special case described above. vchiq: Avoid high load when blocked and unkillable vchiq: Include SIGSTOP and SIGCONT in list of signals not-masked by vchiq to allow gdb to work vchiq_arm: Complete support for SYNCHRONOUS mode vchiq: Remove inline from suspend/resume vchiq: Allocation does not need to be atomic vchiq: Fix wrong condition check The log level is checked from within the log call. Remove the check in the call. Signed-off-by: Pranith Kumar <[email protected]> BCM270x: Add vchiq device to platform file and Device Tree Prepare to turn the vchiq module into a driver. Signed-off-by: Noralf Trønnes <[email protected]> bcm2708: vchiq: Add Device Tree support Turn vchiq into a driver and stop hardcoding resources. Use devm_* functions in probe path to simplify cleanup. A global variable is used to hold the register address. This is done to keep this patch as small as possible. Also make available on ARCH_BCM2835. Based on work by Lubomir Rintel. Signed-off-by: Noralf Trønnes <[email protected]> vchiq: Change logging level for inbound data vchiq_arm: Two cacheing fixes 1) Make fragment size vary with cache line size Without this patch, non-cache-line-aligned transfers may corrupt (or be corrupted by) adjacent data structures. Both ARM and VC need to be updated to enable this feature. This is ensured by having the loader apply a new DT parameter - cache-line-size. The existence of this parameter guarantees that the kernel is capable, and the parameter will only be modified from the safe default if the loader is capable. 2) Flush/invalidate vmalloc'd memory, and invalidate after reads vchiq: fix NULL pointer dereference when closing driver The following code run as root will cause a null pointer dereference oops: int fd = open("/dev/vc-cma", O_RDONLY); if (fd < 0) err(1, "open failed"); (void)close(fd); [ 1704.877721] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 1704.877725] pgd = b899c000 [ 1704.877736] [00000000] *pgd=37fab831, *pte=00000000, *ppte=00000000 [ 1704.877748] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 1704.877765] Modules linked in: evdev i2c_bcm2708 uio_pdrv_genirq uio [ 1704.877774] CPU: 2 PID: 3656 Comm: stress-ng-fstat Not tainted 3.19.1-12-generic-bcm2709 #12-Ubuntu [ 1704.877777] Hardware name: BCM2709 [ 1704.877783] task: b8ab9b00 ti: b7e68000 task.ti: b7e68000 [ 1704.877798] PC is at __down_interruptible+0x50/0xec [ 1704.877806] LR is at down_interruptible+0x5c/0x68 [ 1704.877813] pc : [<80630ee8>] lr : [<800704b0>] psr: 60080093 sp : b7e69e50 ip : b7e69e88 fp : b7e69e84 [ 1704.877817] r10: b88123c8 r9 : 00000010 r8 : 00000001 [ 1704.877822] r7 : b8ab9b00 r6 : 7fffffff r5 : 80a1cc34 r4 : 80a1cc34 [ 1704.877826] r3 : b7e69e50 r2 : 00000000 r1 : 00000000 r0 : 80a1cc34 [ 1704.877833] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1704.877838] Control: 10c5387d Table: 3899c06a DAC: 00000015 [ 1704.877843] Process do-oops (pid: 3656, stack limit = 0xb7e68238) [ 1704.877848] Stack: (0xb7e69e50 to 0xb7e6a000) [ 1704.877856] 9e40: 80a1cc3c 00000000 00000010 b88123c8 [ 1704.877865] 9e60: b7e69e84 80a1cc34 fff9fee9 ffffffff b7e68000 00000009 b7e69ea4 b7e69e88 [ 1704.877874] 9e80: 800704b0 80630ea4 fff9fee9 60080013 80a1cc28 fff9fee9 b7e69edc b7e69ea8 [ 1704.877884] 9ea0: 8040f558 80070460 fff9fee9 ffffffff 00000000 00000000 00000009 80a1cb7c [ 1704.877893] 9ec0: 00000000 80a1cb7c 00000000 00000010 b7e69ef4 b7e69ee0 803e1ba4 8040f514 [ 1704.877902] 9ee0: 00000e48 80a1cb7c b7e69f14 b7e69ef8 803e1c9c 803e1b74 b88123c0 b92acb18 [ 1704.877911] 9f00: b8812790 b8d815d8 b7e69f24 b7e69f18 803e2250 803e1bc8 b7e69f5c b7e69f28 [ 1704.877921] 9f20: 80167bac 803e222c 00000000 00000000 b7e69f54 b8ab9ffc 00000000 8098c794 [ 1704.877930] 9f40: b8ab9b00 8000efc4 b7e68000 00000000 b7e69f6c b7e69f60 80167d6c 80167b28 [ 1704.877939] 9f60: b7e69f8c b7e69f70 80047d38 80167d60 b7e68000 b7e68010 8000efc4 b7e69fb0 [ 1704.877949] 9f80: b7e69fac b7e69f90 80012820 80047c84 01155490 011549a8 00000001 00000006 [ 1704.877957] 9fa0: 00000000 b7e69fb0 8000ee5c 80012790 00000000 353d8c0f 7efc4308 00000000 [ 1704.877966] 9fc0: 01155490 011549a8 00000001 00000006 00000000 00000000 76cf3ba0 00000003 [ 1704.877975] 9fe0: 00000000 7efc42e4 0002272f 76e2ed66 60080030 00000003 00000000 00000000 [ 1704.877998] [<80630ee8>] (__down_interruptible) from [<800704b0>] (down_interruptible+0x5c/0x68) [ 1704.878015] [<800704b0>] (down_interruptible) from [<8040f558>] (vchiu_queue_push+0x50/0xd8) [ 1704.878032] [<8040f558>] (vchiu_queue_push) from [<803e1ba4>] (send_worker_msg+0x3c/0x54) [ 1704.878045] [<803e1ba4>] (send_worker_msg) from [<803e1c9c>] (vc_cma_set_reserve+0xe0/0x1c4) [ 1704.878057] [<803e1c9c>] (vc_cma_set_reserve) from [<803e2250>] (vc_cma_release+0x30/0x38) [ 1704.878069] [<803e2250>] (vc_cma_release) from [<80167bac>] (__fput+0x90/0x1e0) [ 1704.878082] [<80167bac>] (__fput) from [<80167d6c>] (____fput+0x18/0x1c) [ 1704.878094] [<80167d6c>] (____fput) from [<80047d38>] (task_work_run+0xc0/0xf8) [ 1704.878109] [<80047d38>] (task_work_run) from [<80012820>] (do_work_pending+0x9c/0xc4) [ 1704.878123] [<80012820>] (do_work_pending) from [<8000ee5c>] (work_pending+0xc/0x20) [ 1704.878133] Code: e50b1034 e3a01000 e50b2030 e580300c (e5823000) ..the fix is to ensure that we have actually initialized the queue before we attempt to push any items onto it. This occurs if we do an open() followed by a close() without any activity in between. Signed-off-by: Colin Ian King <[email protected]> vchiq_arm: Sort out the vmalloc case See: raspberrypi/linux#1055 vchiq: hack: Add include depecated dma include file [gregkh] added dependancy on CONFIG_BROKEN to make things sane for now. Cc: Eric Anholt <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Signed-off-by: popcornmix <[email protected]> vchiq: create_pagelist copes with vmalloc memory Signed-off-by: Daniel Stone <[email protected]> vchiq: fix the shim message release Signed-off-by: Daniel Stone <[email protected]> vchiq: export additional symbols Signed-off-by: Daniel Stone <[email protected]> VCHIQ: Make service closure fully synchronous (drv) This is one half of a two-part patch, the other half of which is to the vchiq_lib user library. With these patches, calls to vchiq_close_service and vchiq_remove_service won't return until any associated callbacks have been delivered to the callback thread. VCHIQ: Add per-service tracing The new service option VCHIQ_SERVICE_OPTION_TRACE is a boolean that toggles tracing for the specified service. This commit also introduces vchi_service_set_option and the associated option VCHI_SERVICE_OPTION_TRACE. vchiq: Make the synchronous-CLOSE logic more tolerant vchiq: Move logging control into debugfs vchiq: Take care of a corner case tickled by VCSM Closing a connection that isn't fully open requires care, since one side does not know the other side's port number. Code was present to handle the case where a CLOSE is sent immediately after an OPEN, i.e. before the OPENACK has been received, but this was incorrectly being used when an OPEN from a client using port 0 was rejected. (In the observed failure, the host was attempting to use the VCSM service, which isn't present in the 'cutdown' firmware. The failure was intermittent because sometimes the keepalive service would grab port 0.) This case can be distinguished because the client's remoteport will still be VCHIQ_PORT_FREE, and the srvstate will be OPENING. Either condition is sufficient to differentiate it from the special case described above. vchiq: Avoid high load when blocked and unkillable vchiq: Include SIGSTOP and SIGCONT in list of signals not-masked by vchiq to allow gdb to work vchiq_arm: Complete support for SYNCHRONOUS mode vchiq: Remove inline from suspend/resume vchiq: Allocation does not need to be atomic vchiq: Fix wrong condition check The log level is checked from within the log call. Remove the check in the call. Signed-off-by: Pranith Kumar <[email protected]> BCM270x: Add vchiq device to platform file and Device Tree Prepare to turn the vchiq module into a driver. Signed-off-by: Noralf Trønnes <[email protected]> bcm2708: vchiq: Add Device Tree support Turn vchiq into a driver and stop hardcoding resources. Use devm_* functions in probe path to simplify cleanup. A global variable is used to hold the register address. This is done to keep this patch as small as possible. Also make available on ARCH_BCM2835. Based on work by Lubomir Rintel. Signed-off-by: Noralf Trønnes <[email protected]> vchiq: Change logging level for inbound data vchiq_arm: Two cacheing fixes 1) Make fragment size vary with cache line size Without this patch, non-cache-line-aligned transfers may corrupt (or be corrupted by) adjacent data structures. Both ARM and VC need to be updated to enable this feature. This is ensured by having the loader apply a new DT parameter - cache-line-size. The existence of this parameter guarantees that the kernel is capable, and the parameter will only be modified from the safe default if the loader is capable. 2) Flush/invalidate vmalloc'd memory, and invalidate after reads vchiq: fix NULL pointer dereference when closing driver The following code run as root will cause a null pointer dereference oops: int fd = open("/dev/vc-cma", O_RDONLY); if (fd < 0) err(1, "open failed"); (void)close(fd); [ 1704.877721] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 1704.877725] pgd = b899c000 [ 1704.877736] [00000000] *pgd=37fab831, *pte=00000000, *ppte=00000000 [ 1704.877748] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 1704.877765] Modules linked in: evdev i2c_bcm2708 uio_pdrv_genirq uio [ 1704.877774] CPU: 2 PID: 3656 Comm: stress-ng-fstat Not tainted 3.19.1-12-generic-bcm2709 #12-Ubuntu [ 1704.877777] Hardware name: BCM2709 [ 1704.877783] task: b8ab9b00 ti: b7e68000 task.ti: b7e68000 [ 1704.877798] PC is at __down_interruptible+0x50/0xec [ 1704.877806] LR is at down_interruptible+0x5c/0x68 [ 1704.877813] pc : [<80630ee8>] lr : [<800704b0>] psr: 60080093 sp : b7e69e50 ip : b7e69e88 fp : b7e69e84 [ 1704.877817] r10: b88123c8 r9 : 00000010 r8 : 00000001 [ 1704.877822] r7 : b8ab9b00 r6 : 7fffffff r5 : 80a1cc34 r4 : 80a1cc34 [ 1704.877826] r3 : b7e69e50 r2 : 00000000 r1 : 00000000 r0 : 80a1cc34 [ 1704.877833] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1704.877838] Control: 10c5387d Table: 3899c06a DAC: 00000015 [ 1704.877843] Process do-oops (pid: 3656, stack limit = 0xb7e68238) [ 1704.877848] Stack: (0xb7e69e50 to 0xb7e6a000) [ 1704.877856] 9e40: 80a1cc3c 00000000 00000010 b88123c8 [ 1704.877865] 9e60: b7e69e84 80a1cc34 fff9fee9 ffffffff b7e68000 00000009 b7e69ea4 b7e69e88 [ 1704.877874] 9e80: 800704b0 80630ea4 fff9fee9 60080013 80a1cc28 fff9fee9 b7e69edc b7e69ea8 [ 1704.877884] 9ea0: 8040f558 80070460 fff9fee9 ffffffff 00000000 00000000 00000009 80a1cb7c [ 1704.877893] 9ec0: 00000000 80a1cb7c 00000000 00000010 b7e69ef4 b7e69ee0 803e1ba4 8040f514 [ 1704.877902] 9ee0: 00000e48 80a1cb7c b7e69f14 b7e69ef8 803e1c9c 803e1b74 b88123c0 b92acb18 [ 1704.877911] 9f00: b8812790 b8d815d8 b7e69f24 b7e69f18 803e2250 803e1bc8 b7e69f5c b7e69f28 [ 1704.877921] 9f20: 80167bac 803e222c 00000000 00000000 b7e69f54 b8ab9ffc 00000000 8098c794 [ 1704.877930] 9f40: b8ab9b00 8000efc4 b7e68000 00000000 b7e69f6c b7e69f60 80167d6c 80167b28 [ 1704.877939] 9f60: b7e69f8c b7e69f70 80047d38 80167d60 b7e68000 b7e68010 8000efc4 b7e69fb0 [ 1704.877949] 9f80: b7e69fac b7e69f90 80012820 80047c84 01155490 011549a8 00000001 00000006 [ 1704.877957] 9fa0: 00000000 b7e69fb0 8000ee5c 80012790 00000000 353d8c0f 7efc4308 00000000 [ 1704.877966] 9fc0: 01155490 011549a8 00000001 00000006 00000000 00000000 76cf3ba0 00000003 [ 1704.877975] 9fe0: 00000000 7efc42e4 0002272f 76e2ed66 60080030 00000003 00000000 00000000 [ 1704.877998] [<80630ee8>] (__down_interruptible) from [<800704b0>] (down_interruptible+0x5c/0x68) [ 1704.878015] [<800704b0>] (down_interruptible) from [<8040f558>] (vchiu_queue_push+0x50/0xd8) [ 1704.878032] [<8040f558>] (vchiu_queue_push) from [<803e1ba4>] (send_worker_msg+0x3c/0x54) [ 1704.878045] [<803e1ba4>] (send_worker_msg) from [<803e1c9c>] (vc_cma_set_reserve+0xe0/0x1c4) [ 1704.878057] [<803e1c9c>] (vc_cma_set_reserve) from [<803e2250>] (vc_cma_release+0x30/0x38) [ 1704.878069] [<803e2250>] (vc_cma_release) from [<80167bac>] (__fput+0x90/0x1e0) [ 1704.878082] [<80167bac>] (__fput) from [<80167d6c>] (____fput+0x18/0x1c) [ 1704.878094] [<80167d6c>] (____fput) from [<80047d38>] (task_work_run+0xc0/0xf8) [ 1704.878109] [<80047d38>] (task_work_run) from [<80012820>] (do_work_pending+0x9c/0xc4) [ 1704.878123] [<80012820>] (do_work_pending) from [<8000ee5c>] (work_pending+0xc/0x20) [ 1704.878133] Code: e50b1034 e3a01000 e50b2030 e580300c (e5823000) ..the fix is to ensure that we have actually initialized the queue before we attempt to push any items onto it. This occurs if we do an open() followed by a close() without any activity in between. Signed-off-by: Colin Ian King <[email protected]> vchiq_arm: Sort out the vmalloc case See: raspberrypi/linux#1055 vchiq: hack: Add include depecated dma include file

pelwell pushed a commit that referenced this issue Jul 14, 2015

vchiq_arm: Sort out the vmalloc case

dcf857a

See: #1055

pelwell pushed a commit that referenced this issue Jul 14, 2015

vchiq_arm: Sort out the vmalloc case

042bc60

See: #1055

popcornmix added a commit to raspberrypi/firmware that referenced this issue Jul 14, 2015

kernel: vchiq_arm: Sort out the vmalloc case

a00febe

See: raspberrypi/linux#1055

popcornmix added a commit to Hexxeh/rpi-firmware that referenced this issue Jul 14, 2015

kernel: vchiq_arm: Sort out the vmalloc case

c27437e

See: raspberrypi/linux#1055

popcornmix closed this as completed Jul 15, 2015

pelwell pushed a commit that referenced this issue Jul 24, 2015

vchiq_arm: Sort out the vmalloc case

dd37547

See: #1055

pelwell pushed a commit that referenced this issue Aug 5, 2015

vchiq_arm: Sort out the vmalloc case

01f8117

See: #1055

pelwell pushed a commit that referenced this issue Aug 17, 2015

vchiq_arm: Sort out the vmalloc case

051d845

See: #1055

pelwell pushed a commit that referenced this issue Sep 11, 2015

vchiq_arm: Sort out the vmalloc case

b07e5b0

See: #1055

pelwell pushed a commit that referenced this issue Sep 14, 2015

vchiq_arm: Sort out the vmalloc case

9748c62

See: #1055

pelwell pushed a commit that referenced this issue Sep 14, 2015

vchiq_arm: Sort out the vmalloc case

ef190db

See: #1055

pelwell pushed a commit that referenced this issue Sep 22, 2015

vchiq_arm: Sort out the vmalloc case

dc0f6ed

See: #1055

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Motion not working after firmware upgrade. #1055

Motion not working after firmware upgrade. #1055

ifermon commented Jul 10, 2015

6by9 commented Jul 10, 2015

6by9 commented Jul 11, 2015

popcornmix commented Jul 11, 2015

ifermon commented Jul 11, 2015

6by9 commented Jul 12, 2015

6by9 commented Jul 13, 2015

popcornmix commented Jul 13, 2015

6by9 commented Jul 13, 2015

6by9 commented Jul 13, 2015

pelwell commented Jul 13, 2015

ifermon commented Jul 13, 2015

pelwell commented Jul 13, 2015

pelwell commented Jul 14, 2015

pelwell commented Jul 14, 2015

popcornmix commented Jul 14, 2015

ifermon commented Jul 15, 2015

Motion not working after firmware upgrade. #1055

Motion not working after firmware upgrade. #1055

Comments

ifermon commented Jul 10, 2015

6by9 commented Jul 10, 2015

6by9 commented Jul 11, 2015

popcornmix commented Jul 11, 2015

ifermon commented Jul 11, 2015

6by9 commented Jul 12, 2015

6by9 commented Jul 13, 2015

popcornmix commented Jul 13, 2015

6by9 commented Jul 13, 2015

6by9 commented Jul 13, 2015

pelwell commented Jul 13, 2015

ifermon commented Jul 13, 2015

pelwell commented Jul 13, 2015

pelwell commented Jul 14, 2015

pelwell commented Jul 14, 2015

popcornmix commented Jul 14, 2015

ifermon commented Jul 15, 2015