Merge remote-tracking branch 'stable/linux-4.19.y' into rpi-4.19.y

Documentation/filesystems/overlayfs.txt

@@ -302,7 +302,7 @@ beneath or above the path of another overlay lower layer path.
 
 Using an upper layer path and/or a workdir path that are already used by
 another overlay mount is not allowed and may fail with EBUSY.  Using
-partially overlapping paths is not allowed but will not fail with EBUSY.
+partially overlapping paths is not allowed and may fail with EBUSY.
 If files are accessed from two overlayfs mounts which share or overlap the
 upper layer and/or workdir path the behavior of the overlay is undefined,
 though it will not result in a crash or deadlock.

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 4
 PATCHLEVEL = 19
-SUBLEVEL = 73
+SUBLEVEL = 75
 EXTRAVERSION =
 NAME = "People's Front"
 

arch/arm/boot/dts/am571x-idk.dts

@@ -98,14 +98,9 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-names = "default", "hs";
 	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
 	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_sdr12>;
-	pinctrl-3 = <&mmc1_pins_sdr25>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
-	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
 };
 
 &mmc2 {

arch/arm/boot/dts/am572x-idk.dts

@@ -20,14 +20,9 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-names = "default", "hs";
 	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
 	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_sdr12>;
-	pinctrl-3 = <&mmc1_pins_sdr25>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
-	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
 };
 
 &mmc2 {

arch/arm/boot/dts/am574x-idk.dts

@@ -24,14 +24,9 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-names = "default", "hs";
 	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
 	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_default>;
-	pinctrl-3 = <&mmc1_pins_hs>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_conf>;
-	pinctrl-6 = <&mmc1_pins_ddr50 &mmc1_iodelay_sdr104_conf>;
 };
 
 &mmc2 {

arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi

@@ -433,6 +433,7 @@
 
 	bus-width = <4>;
 	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+	no-1-8-v;
 };
 
 &mmc2 {

arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts

@@ -19,14 +19,9 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-names = "default", "hs";
 	pinctrl-0 = <&mmc1_pins_default>;
 	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_sdr12>;
-	pinctrl-3 = <&mmc1_pins_sdr25>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>;
-	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>;
 	vmmc-supply = <&vdd_3v3>;
 	vqmmc-supply = <&ldo1_reg>;
 };

arch/arm/boot/dts/am57xx-beagle-x15-revc.dts

@@ -19,14 +19,9 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-names = "default", "hs";
 	pinctrl-0 = <&mmc1_pins_default>;
 	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_sdr12>;
-	pinctrl-3 = <&mmc1_pins_sdr25>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
-	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
 	vmmc-supply = <&vdd_3v3>;
 	vqmmc-supply = <&ldo1_reg>;
 };

arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi

@@ -32,7 +32,7 @@
  *
  * Datamanual Revisions:
  *
- * AM572x Silicon Revision 2.0: SPRS953B, Revised November 2016
+ * AM572x Silicon Revision 2.0: SPRS953F, Revised May 2019
  * AM572x Silicon Revision 1.1: SPRS915R, Revised November 2016
  *
  */
@@ -229,45 +229,45 @@
 
 	mmc3_pins_default: mmc3_pins_default {
 		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
 		>;
 	};
 
 	mmc3_pins_hs: mmc3_pins_hs {
 		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
 		>;
 	};
 
 	mmc3_pins_sdr12: mmc3_pins_sdr12 {
 		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
 		>;
 	};
 
 	mmc3_pins_sdr25: mmc3_pins_sdr25 {
 		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
 		>;
 	};
 

arch/arm/mach-omap1/ams-delta-fiq-handler.S

@@ -135,14 +135,15 @@ restart:
 	orr r11, r11, r13			@ mask all requested interrupts
 	str r11, [r12, #OMAP1510_GPIO_INT_MASK]
 
+	str r13, [r12, #OMAP1510_GPIO_INT_STATUS] @ ack all requested interrupts
+
 	ands r10, r13, #KEYBRD_CLK_MASK		@ extract keyboard status - set?
 	beq hksw				@ no - try next source
 
 
 	@@@@@@@@@@@@@@@@@@@@@@
 	@ Keyboard clock FIQ mode interrupt handler
 	@ r10 now contains KEYBRD_CLK_MASK, use it
-	str r10, [r12, #OMAP1510_GPIO_INT_STATUS]	@ ack the interrupt
 	bic r11, r11, r10				@ unmask it
 	str r11, [r12, #OMAP1510_GPIO_INT_MASK]
 

arch/arm/mach-omap1/ams-delta-fiq.c

@@ -73,9 +73,7 @@ static irqreturn_t deferred_fiq(int irq, void *dev_id)
 			 * interrupts default to since commit 80ac93c27441
 			 * requires interrupt already acked and unmasked.
 			 */
-			if (irq_chip->irq_ack)
-				irq_chip->irq_ack(d);
-			if (irq_chip->irq_unmask)
+			if (!WARN_ON_ONCE(!irq_chip->irq_unmask))
 				irq_chip->irq_unmask(d);
 		}
 		for (; irq_counter[gpio] < fiq_count; irq_counter[gpio]++)

arch/arm/mach-omap2/omap4-common.c

@@ -131,6 +131,9 @@ static int __init omap4_sram_init(void)
 	struct device_node *np;
 	struct gen_pool *sram_pool;
 
+	if (!soc_is_omap44xx() && !soc_is_omap54xx())
+		return 0;
+
 	np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu");
 	if (!np)
 		pr_warn("%s:Unable to allocate sram needed to handle errata I688\n",

arch/arm/mach-omap2/omap_hwmod_7xx_data.c

@@ -385,7 +385,8 @@ static struct omap_hwmod dra7xx_dcan2_hwmod = {
 static struct omap_hwmod_class_sysconfig dra7xx_epwmss_sysc = {
 	.rev_offs	= 0x0,
 	.sysc_offs	= 0x4,
-	.sysc_flags	= SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			  SYSC_HAS_RESET_STATUS,
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
 	.sysc_fields	= &omap_hwmod_sysc_type2,
 };

arch/arm/mm/init.c

@@ -196,6 +196,11 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max_low,
 #ifdef CONFIG_HAVE_ARCH_PFN_VALID
 int pfn_valid(unsigned long pfn)
 {
+	phys_addr_t addr = __pfn_to_phys(pfn);
+
+	if (__phys_to_pfn(addr) != pfn)
+		return 0;
+
 	return memblock_is_map_memory(__pfn_to_phys(pfn));
 }
 EXPORT_SYMBOL(pfn_valid);
@@ -713,7 +718,8 @@ static void update_sections_early(struct section_perm perms[], int n)
 		if (t->flags & PF_KTHREAD)
 			continue;
 		for_each_thread(t, s)
-			set_section_perms(perms, n, true, s->mm);
+			if (s->mm)
+				set_section_perms(perms, n, true, s->mm);
 	}
 	set_section_perms(perms, n, true, current->active_mm);
 	set_section_perms(perms, n, true, &init_mm);

arch/arm64/kernel/cpufeature.c

@@ -895,6 +895,12 @@ static bool unmap_kernel_at_el0(const struct arm64_cpu_capabilities *entry,
 	static const struct midr_range kpti_safe_list[] = {
 		MIDR_ALL_VERSIONS(MIDR_CAVIUM_THUNDERX2),
 		MIDR_ALL_VERSIONS(MIDR_BRCM_VULCAN),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A35),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A53),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A55),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A57),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A72),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A73),
 		{ /* sentinel */ }
 	};
 	char const *str = "command line option";

arch/powerpc/include/asm/uaccess.h

@@ -306,6 +306,7 @@ extern unsigned long __copy_tofrom_user(void __user *to,
 static inline unsigned long
 raw_copy_in_user(void __user *to, const void __user *from, unsigned long n)
 {
+	barrier_nospec();
 	return __copy_tofrom_user(to, from, n);
 }
 #endif /* __powerpc64__ */

arch/powerpc/mm/pgtable-radix.c

@@ -521,14 +521,6 @@ void __init radix__early_init_devtree(void)
 	mmu_psize_defs[MMU_PAGE_64K].shift = 16;
 	mmu_psize_defs[MMU_PAGE_64K].ap = 0x5;
 found:
-#ifdef CONFIG_SPARSEMEM_VMEMMAP
-	if (mmu_psize_defs[MMU_PAGE_2M].shift) {
-		/*
-		 * map vmemmap using 2M if available
-		 */
-		mmu_vmemmap_psize = MMU_PAGE_2M;
-	}
-#endif /* CONFIG_SPARSEMEM_VMEMMAP */
 	return;
 }
 
@@ -567,7 +559,13 @@ void __init radix__early_init_mmu(void)
 
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
 	/* vmemmap mapping */
-	mmu_vmemmap_psize = mmu_virtual_psize;
+	if (mmu_psize_defs[MMU_PAGE_2M].shift) {
+		/*
+		 * map vmemmap using 2M if available
+		 */
+		mmu_vmemmap_psize = MMU_PAGE_2M;
+	} else
+		mmu_vmemmap_psize = mmu_virtual_psize;
 #endif
 	/*
 	 * initialize page table size

arch/s390/kvm/interrupt.c

@@ -1879,6 +1879,16 @@ int s390int_to_s390irq(struct kvm_s390_interrupt *s390int,
 	case KVM_S390_MCHK:
 		irq->u.mchk.mcic = s390int->parm64;
 		break;
+	case KVM_S390_INT_PFAULT_INIT:
+		irq->u.ext.ext_params = s390int->parm;
+		irq->u.ext.ext_params2 = s390int->parm64;
+		break;
+	case KVM_S390_RESTART:
+	case KVM_S390_INT_CLOCK_COMP:
+	case KVM_S390_INT_CPU_TIMER:
+		break;
+	default:
+		return -EINVAL;
 	}
 	return 0;
 }

arch/s390/kvm/kvm-s390.c

@@ -928,6 +928,8 @@ static int kvm_s390_vm_start_migration(struct kvm *kvm)
 	/* mark all the pages in active slots as dirty */
 	for (slotnr = 0; slotnr < slots->used_slots; slotnr++) {
 		ms = slots->memslots + slotnr;
+		if (!ms->dirty_bitmap)
+			return -EINVAL;
 		/*
 		 * The second half of the bitmap is only used on x86,
 		 * and would be wasted otherwise, so we put it to good
@@ -3956,7 +3958,7 @@ long kvm_arch_vcpu_async_ioctl(struct file *filp,
 	}
 	case KVM_S390_INTERRUPT: {
 		struct kvm_s390_interrupt s390int;
-		struct kvm_s390_irq s390irq;
+		struct kvm_s390_irq s390irq = {};
 
 		if (copy_from_user(&s390int, argp, sizeof(s390int)))
 			return -EFAULT;

arch/s390/net/bpf_jit_comp.c

@@ -841,7 +841,7 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
 		break;
 	case BPF_ALU64 | BPF_NEG: /* dst = -dst */
 		/* lcgr %dst,%dst */
-		EMIT4(0xb9130000, dst_reg, dst_reg);
+		EMIT4(0xb9030000, dst_reg, dst_reg);
 		break;
 	/*
 	 * BPF_FROM_BE/LE
@@ -1015,8 +1015,8 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
 		/* llgf %w1,map.max_entries(%b2) */
 		EMIT6_DISP_LH(0xe3000000, 0x0016, REG_W1, REG_0, BPF_REG_2,
 			      offsetof(struct bpf_array, map.max_entries));
-		/* clgrj %b3,%w1,0xa,label0: if %b3 >= %w1 goto out */
-		EMIT6_PCREL_LABEL(0xec000000, 0x0065, BPF_REG_3,
+		/* clrj %b3,%w1,0xa,label0: if (u32)%b3 >= (u32)%w1 goto out */
+		EMIT6_PCREL_LABEL(0xec000000, 0x0077, BPF_REG_3,
 				  REG_W1, 0, 0xa);
 
 		/*
@@ -1042,8 +1042,10 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
 		 *         goto out;
 		 */
 
-		/* sllg %r1,%b3,3: %r1 = index * 8 */
-		EMIT6_DISP_LH(0xeb000000, 0x000d, REG_1, BPF_REG_3, REG_0, 3);
+		/* llgfr %r1,%b3: %r1 = (u32) index */
+		EMIT4(0xb9160000, REG_1, BPF_REG_3);
+		/* sllg %r1,%r1,3: %r1 *= 8 */
+		EMIT6_DISP_LH(0xeb000000, 0x000d, REG_1, REG_1, REG_0, 3);
 		/* lg %r1,prog(%b2,%r1) */
 		EMIT6_DISP_LH(0xe3000000, 0x0004, REG_1, BPF_REG_2,
 			      REG_1, offsetof(struct bpf_array, ptrs));

arch/x86/Makefile

@@ -38,6 +38,7 @@ REALMODE_CFLAGS	:= $(M16_CFLAGS) -g -Os -DDISABLE_BRANCH_PROFILING \
 
 REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -ffreestanding)
 REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -fno-stack-protector)
+REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -Wno-address-of-packed-member)
 REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), $(cc_stack_align4))
 export REALMODE_CFLAGS