Merge branch 'dsa-mv88e6xxx-port-operation-refine'

Vivien Didelot says:

====================
net: dsa: mv88e6xxx: refine port operations

The Marvell chips have one internal SMI device per port, containing a
set of registers used to configure a port's link, STP state, default
VLAN or addresses database, etc.

This patchset creates port files to implement the port operations as
described in datasheets, and extend the chip ops structure with them.

Patches 1 to 6 implement accessors for port's STP state, port based VLAN
map, default FID, default VID, and 802.1Q mode.

Patches 7 to 11 implement the port's MAC setup of link state, duplex
mode, RGMII delay and speed, all accessed through port's register 0x01.

The new port's MAC setup code is used to re-implement the adjust_link
code and correctly force the link down before changing any of the MAC
settings, as requested by the datasheets.

The port's MAC accessors use values compatible with struct phy_device
(e.g. DUPLEX_FULL) and extend them when needed (e.g. SPEED_MAX).

Changes in v2:

  - Strictly use new _UNFORCED values instead of re-using _UNKNOWN ones.
====================

Signed-off-by: David S. Miller <[email protected]>

drivers/net/dsa/mv88e6xxx/Makefile

@@ -2,3 +2,4 @@ obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
 mv88e6xxx-objs := chip.o
 mv88e6xxx-objs += global1.o
 mv88e6xxx-$(CONFIG_NET_DSA_MV88E6XXX_GLOBAL2) += global2.o
+mv88e6xxx-objs += port.o