BCM2708: Add I2S support to board file

Adds the required initializations for I2S to the board file of mach-bcm2708. Signed-off-by: Florian Meier <[email protected]> bcm2708-i2s: Enable MMAP support via a DT property and overlay The i2s driver used to claim to support MMAP, but that feature was disabled when some problems were found. Add the ability to enable this feature through Device Tree, using the i2s-mmap overlay. See: #1004
raspberrypi · Jun 18, 2015 · 0986670 · 0986670
1 parent 758ff80
commit 0986670
Show file tree

Hide file tree

Showing 2 changed files with 32 additions and 1 deletion.
diff --git a/arch/arm/mach-bcm2708/bcm2708.c b/arch/arm/mach-bcm2708/bcm2708.c
@@ -616,6 +616,28 @@ static struct platform_device bcm2835_thermal_device = {
 	.name = "bcm2835_thermal",
 };
 
+#if defined(CONFIG_SND_BCM2708_SOC_I2S) || defined(CONFIG_SND_BCM2708_SOC_I2S_MODULE)
+static struct resource bcm2708_i2s_resources[] = {
+	{
+		.start = I2S_BASE,
+		.end = I2S_BASE + 0x20,
+		.flags = IORESOURCE_MEM,
+	},
+        {
+		.start = PCM_CLOCK_BASE,
+		.end = PCM_CLOCK_BASE + 0x02,
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device bcm2708_i2s_device = {
+	.name = "bcm2708-i2s",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bcm2708_i2s_resources),
+	.resource = bcm2708_i2s_resources,
+};
+#endif
+
 int __init bcm_register_device(struct platform_device *pdev)
 {
 	int ret;
@@ -780,6 +802,10 @@ void __init bcm2708_init(void)
 
 	bcm_register_device_dt(&bcm2835_thermal_device);
 
+#if defined(CONFIG_SND_BCM2708_SOC_I2S) || defined(CONFIG_SND_BCM2708_SOC_I2S_MODULE)
+	bcm_register_device_dt(&bcm2708_i2s_device);
+#endif
+
 	if (!use_dt) {
 		for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 			struct amba_device *d = amba_devs[i];

diff --git a/sound/soc/bcm/bcm2708-i2s.c b/sound/soc/bcm/bcm2708-i2s.c
@@ -874,7 +874,7 @@ static const struct snd_soc_component_driver bcm2708_i2s_component = {
 	.name		= "bcm2708-i2s-comp",
 };
 
-static const struct snd_pcm_hardware bcm2708_pcm_hardware = {
+static struct snd_pcm_hardware bcm2708_pcm_hardware = {
 	.info			= SNDRV_PCM_INFO_INTERLEAVED |
 				  SNDRV_PCM_INFO_JOINT_DUPLEX,
 	.formats		= SNDRV_PCM_FMTBIT_S16_LE |
@@ -902,6 +902,11 @@ static int bcm2708_i2s_probe(struct platform_device *pdev)
 	struct regmap *regmap[2];
 	struct resource *mem[2];
 
+	if (of_property_read_bool(pdev->dev.of_node, "brcm,enable-mmap"))
+		bcm2708_pcm_hardware.info |=
+			SNDRV_PCM_INFO_MMAP |
+			SNDRV_PCM_INFO_MMAP_VALID;
+
 	/* Request both ioareas */
 	for (i = 0; i <= 1; i++) {
 		void __iomem *base;