Adding hand wired Bento macro pad.

keyboards/handwired/bento/bento.c

@@ -0,0 +1 @@
+#include "bento.h"

keyboards/handwired/bento/bento.h

@@ -0,0 +1,5 @@
+#pragma once
+
+#ifdef KEYBOARD_ghostseven_bento_rev1
+    #include "rev1.h"
+#endif

keyboards/handwired/bento/info.json

@@ -0,0 +1,19 @@
+{
+  "keyboard_name": "Bento Macropad",
+  "url": "https://www.thingiverse.com/thing:4416966",
+  "maintainer": "Ghostseven",
+  "width": 3,
+  "height": 2,
+  "layouts": {
+    "LAYOUT": {
+      "layout": [
+        {"x":0, "y":0},
+        {"x":1, "y":0},
+        {"x":2, "y":0},
+        {"x":0, "y":1},
+        {"x":1, "y":1},
+        {"x":2, "y":1}
+      ]
+    }
+  }
+}

keyboards/handwired/bento/keymaps/default/keymap.c

@@ -0,0 +1,50 @@
+/* Copyright 2019 Danny Nguyen <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum encoder_names {
+  _ENCODER
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /*
+        |                   |      | Knob 1: Vol Dn/Up  |
+        | Hold: Layer 2     | Up   | Press: Mute        |
+        | Left              | Down | Right              |
+     */
+    [0] = LAYOUT(
+        MO(1), KC_UP, KC_MUTE,
+        KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    /*
+        | Held: Layer 2  | Home | RESET      |
+        | Media Previous | End  | Media Next |
+     */
+    [1] = LAYOUT(
+        _______, KC_HOME, RESET,
+        KC_MPRV, KC_END , KC_MNXT
+    ),
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == _ENCODER) {
+        if (clockwise) {
+            tap_code(KC_VOLU);
+        } else {
+            tap_code(KC_VOLD);
+        }
+    }
+}

keyboards/handwired/bento/readme.md

@@ -0,0 +1,15 @@
+# BENTO
+
+![BENTO](https://cdn.thingiverse.com/assets/0b/6a/84/9c/9a/large_display_IMG_3374.jpg)
+
+A hand wired 2x3 macropad with a rotary encoder at the upper right corner.
+
+* Keyboard Maintainer: [Dwin17](https://www.thingiverse.com/dwin17) - Hardware [GhostSeven](https://github.com/ghostseven) - QMK Firmware
+* Hardware Supported: Pro Micro, Elite-C, Proton C
+* Hardware Availability: [Thingiverse](https://www.thingiverse.com/thing:4416966)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ghostseven/bento/rev1:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/handwired/bento/rev1/config.h

@@ -0,0 +1,60 @@
+/*
+Copyright 2019 Danny Nguyen <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xDAD3
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    GhostSeven
+#define PRODUCT         Bento Macropad Rev. 1
+
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 3
+
+/* Keyboard Matrix Assignments */
+#define DIRECT_PINS { \
+    { D7, B1, D2 }, \
+    { E6, B4, B2 } \
+}
+
+#define ENCODERS_PAD_A { D1 }
+#define ENCODERS_PAD_B { D0 }
+
+#define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
+  #define RGBLED_NUM 4
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+  /*== all animations enable ==*/
+  #define RGBLIGHT_ANIMATIONS
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE

keyboards/handwired/bento/rev1/rev1.c

@@ -0,0 +1,13 @@
+#include "rev1.h"
+
+void eeconfig_init_kb(void) {
+#ifdef RGBLIGHT_ENABLE
+    rgblight_enable(); // Enable RGB by default
+    rgblight_sethsv(0, 255, 255);  // Set default HSV - red hue, full saturation, full brightness
+#ifdef RGBLIGHT_ANIMATIONS
+    rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default
+#endif
+#endif
+
+    eeconfig_init_user();
+}

keyboards/handwired/bento/rev1/rev1.h

@@ -0,0 +1,36 @@
+/* Copyright 2019 Danny Nguyen <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "bento.h"
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    KA1, KA2, KA3, \
+    KB1, KB2, KB3 \
+) \
+{ \
+    { KA1, KA2, KA3 }, \
+    { KB1, KB2, KB3 } \
+}

keyboards/handwired/bento/rev1/rules.mk

@@ -0,0 +1,23 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+ENCODER_ENABLE = yes

keyboards/handwired/bento/rules.mk

@@ -0,0 +1 @@
+DEFAULT_FOLDER = handwired/bento/rev1