[Keyboard] Kinesis + Pro Micro

keyboards/kinesis/config.h

@@ -130,14 +130,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
-#ifdef SUBPROJECT_alvicstep
-    #include "alvicstep/config.h"
-#endif
-#ifdef SUBPROJECT_stapelberg
-    #include "stapelberg/config.h"
-#endif
-#ifdef SUBPROJECT_kint2pp
-    #include "kint2pp/config.h"
-#endif
-
 #endif

keyboards/kinesis/keymaps/dvorak_nguyenvietyen/keymap.c

@@ -0,0 +1,30 @@
+#include QMK_KEYBOARD_H
+
+#define DVORAK_MAC_MODE 0 // Base Dvorak in Kinesis's Mac Mode with (Cmd, Option, Ctrl, Cmd) thumbkeys
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[DVORAK_MAC_MODE] = LAYOUT(
+        // left hand
+        KC_CAPS,  KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5, KC_F6, KC_F7, KC_F8,
+        KC_EQL,   KC_1,    KC_2,    KC_3,    KC_4,   KC_5,
+        KC_TAB,   KC_QUOT, KC_COMM, KC_DOT,  KC_P,   KC_Y,
+        KC_ESC,   KC_A,    KC_O,    KC_E,    KC_U,   KC_I,
+        KC_LSFT,  KC_SCLN, KC_Q,    KC_J,    KC_K,   KC_X,
+                  KC_GRV,  KC_INS,  KC_LEFT, KC_RIGHT,
+        // left thumb
+                            KC_LGUI, KC_LALT,
+                                     KC_HOME,
+                   KC_BSPC, KC_DEL,  KC_END,
+        // right hand
+        KC_F9,  KC_F10,   KC_F11,   KC_F12,   KC_PSCR, KC_SLCK, KC_PAUS, KC_NLCK, KC_POWER,
+        KC_6,   KC_7,     KC_8,     KC_9,     KC_0,    KC_MINS,
+        KC_F,   KC_G,     KC_C,     KC_R,     KC_L,    KC_SLSH,
+        KC_D,   KC_H,     KC_T,     KC_N,     KC_S,    KC_BSLS,
+        KC_B,   KC_M,     KC_W,     KC_V,     KC_Z,    KC_RSFT,
+                          KC_UP,  KC_DOWN, KC_LBRC,    KC_RBRC,
+        // right thumb
+        KC_RCTL,    KC_RGUI,
+        KC_PGUP,
+        KC_PGDN, KC_ENT, KC_SPC
+    )
+};

keyboards/kinesis/kinesis.h

@@ -10,6 +10,9 @@
 #ifdef KEYBOARD_kinesis_kint2pp
 	#include "kint2pp.h"
 #endif
+#ifdef KEYBOARD_kinesis_nguyenvietyen
+	#include "nguyenvietyen.h"
+#endif
 
 #include "quantum.h"
 

keyboards/kinesis/nguyenvietyen/README.md

@@ -0,0 +1,109 @@
+# Viet's Kinesis + Pro Micro
+
+July 2020
+
+This work is inspired by `alvicstep`'s solution. Instead of hooking up the Kinesis to a Teensy 2, this one hooks it up to a Pro Micro.
+
+## Kinesis Board Layout
+The following is a reinterpretation of [@chrisandreae](https://github.com/chrisandreae/keyboard-firmware/blob/public/hardware/kinesis.h)'s work.
+
+### Used Pins
+* 8 columns mapped to output pins 21 - 28
+* 16 rows mapped to 4 input pins: pin 39 - 36. Rows are traversed by iterating and setting 16 values from 0000 to 1111. 
+* 4 leds (e.g. capslock) mapped to input pin 1 - 4
+* keypad key mapped to pin 5
+* program key mapped to pin 6
+* `VCC` mapped to pin 40
+
+### Matrix Configuration
+The matrix configuration of the columns and rows on my Advantage is as follows:
+
+|        | row 0  | row 1  | row 2  | row 3  | row 4  | row 5  | row 6  | row 7  | row 8  | row 9  | row A  | row B  | row C  | row D  | row E  | row F |
+|  ----- | -----  | -----  | -----  | -----  | -----  | -----  | -----  | -----  | -----  | -----  | -----  | -----  | -----  | -----  | -----  | ----- |
+|  col0  | F6     | F8     | F7     | 5%     | 4$     | 3#     | 2@     | 1!     | =+     |        |        |        |        |        |        |       |
+|  col1  | F3     | F5     | F4     | T      | R      | E      | W      | Q      | Tab    |        |        |        |        |        |        |       |
+|  col2  | Esc    | F2     | F1     | G      | F      | D      | S      | A      | CapsLk |        |        |        |        |        |        |       |
+|  col3  | F9     | F11    | F10    | B      | V      | C      | X      | Z      | LShift | Up     |        | Down   |        | [{     | ]}     |       |
+|  col4  | F12    | ScrLk  | PrtSc  | Right  |        | Left   | Insert | ~      |        | 6^     | 7&     | 8*     |        | 9(     | 0)     | -_    |
+|  col5  | Pause  |        |        | LAlt   |        | Home   |        | End    |        | Y      | U      | I      |        | O      | P      | `\|`  |
+|  col6  |        |        |        | LCtrl  | Delete | Bksp   | RCtrl  | Enter  | Space  | H      | J      | K      |        | L      | ;:     | '"    |
+|  col7  |        |        |        |        | RGUI   |        | PageUp |        | PageDn | N      | M      | ,<     |        | .>     | /?     | RShift |
+
+(this is a modified copy from [@alvicstep](https://github.com/qmk/qmk_firmware/blob/master/keyboards/kinesis/alvicstep/alvicstep.h))
+
+In the code, keypad and program keys are mapped respectively to col0 and col1 of row C, the 12th row.  
+
+### Omitted Pins
+There are pins that we currently omit:
+* serial eeprom clock line mapped to pin 7
+* serial eeprom data line mapped to pin 8
+* EEPROM write protect mapped to pin 10.
+* foot switch 1 mapped to pin 11 
+* PS/2 clock mapped to pin 12
+* PS/2 data mapped to pin 13
+* foot switch 2 mapped to pin 17
+* foot switch 3 mapped to pin 15
+* audio mapped to pin 32
+
+### DIP Socket
+Here's an ASCII drawing of the 40 pin DIP socket. 
+```
+   DL2   1  40  VCC
+   DR1   2  39  A
+   DR2   3  38  B
+   DL1   4  37  C
+   KPD   5  36  G
+   PGM   6  35
+   SCL   7  34
+   SDA   8  33
+   RST   9  32  BUZZ
+    WP  10  31  EA
+   FS1  11  30  ALE
+ CLOCK  12  29  PSEN
+  DATA  13  28  r8
+        14  27  r7
+   FS3  15  26  r6
+        16  25  r5
+   FS2  17  24  r4
+ XTAL1  18  23  r3
+ XTAL2  19  22  r2
+   GND  20  21  r1
+```
+(this is copied from [@wjanssens](https://raw.githubusercontent.com/wjanssens/tmk_keyboard/master/keyboard/kinesis/doc/readme.txt))
+
+## Pin Mapping to Pro Micro
+
+The following table is ordered by physical Arduino pin order.
+
+| Arduino | Kinesis | Meaning |
+| ------- | ------- | ------- |
+| D3      | 36      | G       |
+| D2      | 37      | C       |
+| GND     |         |         |
+| GND     |         |         |
+| D1      | 38      | B       |
+| D0      | 39      | A       |
+| D4      | 1       | DL2     |
+| C6      | 2       | DR1     |
+| D7      | 3       | DR2     |
+| E6      | 4       | DL1     |
+| B4      | 5       | KPD     |
+| B5      | 6       | PGM     |
+| B6      | 21      | r1      |
+| B2      | 22      | r2      |
+| B3      | 23      | r3      |
+| B1      | 24      | r4      |
+| F7      | 25      | r5      |
+| F6      | 26      | r6      |
+| F5      | 27      | r7      |
+| F4      | 28      | r8      |
+| VCC     | 40      |         |
+| RESET   |         |         |
+| GND     | 20      |         |
+| RAW     |         |         |
+
+## Notes
+
+* The rows are multiplexed. Instead of reading them out, one sets the row value and corresponding column values are returned through r1-r8.
+* On my keyboard, the keypad and program key have dedicated pins. Since row 12 had no mapping in the physical matrix, there's a code override injects the keypad and program pins to the first two bits in the matrix.
+* I've experimented with debouncing approaches. The current setting delivers a snappier feeling than Kinesis's factory default for me.

keyboards/kinesis/nguyenvietyen/config.h

@@ -0,0 +1,27 @@
+#pragma once
+
+/* USB Device descriptor parameter */
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0003
+
+/* key matrix size */
+#define MATRIX_ROWS 16
+#define MATRIX_COLS 8
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+// Passed through the port multipler, so 4 pins =16
+#define MATRIX_ROW_PINS { D0, D1, D2, D3 }
+#define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW

keyboards/kinesis/nguyenvietyen/matrix.c

@@ -0,0 +1,64 @@
+#include "matrix.h"
+
+#include "quantum.h"
+
+static matrix_row_t read_row(uint8_t row) {
+    matrix_io_delay();  // without this wait read unstable value.
+
+    // keypad and program buttons
+    if (row == 12) {
+        return ~(readPin(B4) | (readPin(B5) << 1) | 0b11111100);
+    }
+
+    return ~(readPin(B6) | readPin(B2) << 1 | readPin(B3) << 2 | readPin(B1) << 3 | readPin(F7) << 4 | readPin(F6) << 5 | readPin(F5) << 6 | readPin(F4) << 7);
+}
+
+static void unselect_rows(void) {
+    // set A,B,C,G to 0
+    PORTD &= 0xF0;
+}
+
+static void select_rows(uint8_t row) {
+    // set A,B,C,G to row value
+    PORTD |= (0x0F & row);
+}
+
+void matrix_init_custom(void) {
+    // output low (multiplexers)
+    setPinOutput(D0);
+    setPinOutput(D1);
+    setPinOutput(D2);
+    setPinOutput(D3);
+
+    // input with pullup (matrix)
+    setPinInputHigh(B6);
+    setPinInputHigh(B2);
+    setPinInputHigh(B3);
+    setPinInputHigh(B1);
+    setPinInputHigh(F7);
+    setPinInputHigh(F6);
+    setPinInputHigh(F5);
+    setPinInputHigh(F4);
+
+    // input with pullup (program and keypad buttons)
+    setPinInputHigh(B4);
+    setPinInputHigh(B5);
+
+    // initialize row and col
+    unselect_rows();
+}
+
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
+    bool matrix_has_changed = false;
+
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        select_rows(i);
+        matrix_row_t row = read_row(i);
+        unselect_rows();
+        bool row_has_changed = current_matrix[i] != row;
+        matrix_has_changed |= row_has_changed;
+        current_matrix[i] = row;
+    }
+
+    return matrix_has_changed;
+}

keyboards/kinesis/nguyenvietyen/nguyenvietyen.c

@@ -0,0 +1,25 @@
+#include "nguyenvietyen.h"
+
+void matrix_init_kb(void) {
+    led_init_ports();
+    matrix_init_user();
+}
+
+void led_init_ports() {
+    // * Set our LED pins as output
+    setPinOutput(D7);  // Keypad LED
+    setPinOutput(C6);  // ScrLock LED
+    setPinOutput(D4);  // NumLock LED
+    setPinOutput(E6);  // CapsLock LED
+}
+
+bool led_update_kb(led_t led_state) {
+    bool res = led_update_user(led_state);
+    if (res) {
+        writePin(D7, !led_state.compose);
+        writePin(C6, !led_state.scroll_lock);
+        writePin(D4, !led_state.num_lock);
+        writePin(E6, !led_state.caps_lock);
+    }
+    return res;
+}

keyboards/kinesis/nguyenvietyen/nguyenvietyen.h

@@ -0,0 +1,74 @@
+#pragma once
+
+#include "quantum.h"
+
+#define ___ KC_NO
+
+#define LAYOUT(                                    \
+    k02, k22, k12, k01, k21, k11, k00, k20, k10,   \
+    k80, k70, k60, k50, k40, k30,                  \
+    k81, k71, k61, k51, k41, k31,                  \
+    k82, k72, k62, k52, k42, k32,                  \
+    k83, k73, k63, k53, k43, k33,                  \
+         k74, k64, k54, k34,                       \
+                             k36, k35,             \
+                                  k55,             \
+                        k56, k46, k75,             \
+                                                   \
+    k03, k23, k13, k04, k24, k14, k05, kC0, kC1,   \
+                   k94, kA4, kB4, kD4, kE4, kF4,   \
+                   k95, kA5, kB5, kD5, kE5, kF5,   \
+                   k96, kA6, kB6, kD6, kE6, kF6,   \
+                   k97, kA7, kB7, kD7, kE7, kF7,   \
+                        k93, kB3, kD3, kE3,        \
+              k47, k66,                            \
+              k67,                                 \
+              k87, k76, k86                        \
+) {                                                \
+    { k00,  k01,  k02,  k03,  k04,  k05,  ___,  ___ }, \
+    { k10,  k11,  k12,  k13,  k14,  ___,  ___,  ___ }, \
+    { k20,  k21,  k22,  k23,  k24,  ___,  ___,  ___ }, \
+    { k30,  k31,  k32,  k33,  k34,  k35,  k36,  ___ }, \
+    { k40,  k41,  k42,  k43,  ___,  ___,  k46,  k47 }, \
+    { k50,  k51,  k52,  k53,  k54,  k55,  k56,  ___ }, \
+    { k60,  k61,  k62,  k63,  k64,  ___,  k66,  k67 }, \
+    { k70,  k71,  k72,  k73,  k74,  k75,  k76,  ___ }, \
+    { k80,  k81,  k82,  k83,  ___,  ___,  k86,  k87 }, \
+    { ___,  ___,  ___,  k93,  k94,  k95,  k96,  k97 }, \
+    { ___,  ___,  ___,  ___,  kA4,  kA5,  kA6,  kA7 }, \
+    { ___,  ___,  ___,  kB3,  kB4,  kB5,  kB6,  kB7 }, \
+    { kC0,  kC1,  ___,  ___,  ___,  ___,  ___,  ___ }, \
+    { ___,  ___,  ___,  kD3,  kD4,  kD5,  kD6,  kD7 }, \
+    { ___,  ___,  ___,  kE3,  kE4,  kE5,  kE6,  kE7 }, \
+    { ___,  ___,  ___,  ___,  kF4,  kF5,  kF6,  kF7 }  \
+}
+
+/*  ---------------- LEFT HAND -----------------   ---------------- RIGHT HAND ---------------- */
+#define LAYOUT_pretty(                                                                           \
+    k02, k22, k12, k01, k21, k11, k00, k20, k10,   k03, k23, k13, k04, k24, k14, k05, kC0, kC1,  \
+    k80, k70, k60, k50, k40, k30,                                 k94, kA4, kB4, kD4, kE4, kF4,  \
+    k81, k71, k61, k51, k41, k31,                                 k95, kA5, kB5, kD5, kE5, kF5,  \
+    k82, k72, k62, k52, k42, k32,                                 k96, kA6, kB6, kD6, kE6, kF6,  \
+    k83, k73, k63, k53, k43, k33,                                 k97, kA7, kB7, kD7, kE7, kF7,  \
+         k74, k64, k54, k34,                                           k93, kB3, kD3, kE3,       \
+                             k36, k35,                       k47, k66,                           \
+                                  k55,                       k67,                                \
+                        k56, k46, k75,                       k87, k76, k86                       \
+) {                                                    \
+    { k00,  k01,  k02,  k03,  k04,  k05,  ___,  ___ }, \
+    { k10,  k11,  k12,  k13,  k14,  ___,  ___,  ___ }, \
+    { k20,  k21,  k22,  k23,  k24,  ___,  ___,  ___ }, \
+    { k30,  k31,  k32,  k33,  k34,  k35,  k36,  ___ }, \
+    { k40,  k41,  k42,  k43,  ___,  ___,  k46,  k47 }, \
+    { k50,  k51,  k52,  k53,  k54,  k55,  k56,  ___ }, \
+    { k60,  k61,  k62,  k63,  k64,  ___,  k66,  k67 }, \
+    { k70,  k71,  k72,  k73,  k74,  k75,  k76,  ___ }, \
+    { k80,  k81,  k82,  k83,  ___,  ___,  k86,  k87 }, \
+    { ___,  ___,  ___,  k93,  k94,  k95,  k96,  k97 }, \
+    { ___,  ___,  ___,  ___,  kA4,  kA5,  kA6,  kA7 }, \
+    { ___,  ___,  ___,  kB3,  kB4,  kB5,  kB6,  kB7 }, \
+    { kC0,  kC1,  ___,  ___,  ___,  ___,  ___,  ___ }, \
+    { ___,  ___,  ___,  kD3,  kD4,  kD5,  kD6,  kD7 }, \
+    { ___,  ___,  ___,  kE3,  kE4,  kE5,  kE6,  kE7 }, \
+    { ___,  ___,  ___,  ___,  kF4,  kF5,  kF6,  kF7 }  \
+}

keyboards/kinesis/nguyenvietyen/rules.mk

@@ -0,0 +1,17 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no
+COMMAND_ENABLE = yes
+NKRO_ENABLE = yes
+CUSTOM_MATRIX = lite
+SRC += matrix.c
+
+# experimentally determined to be sufficient :)
+DEBOUNCE=1