Add revision 1 and revision 2 to ProjectKB Alice PCB

keyboards/projectkb/alice/alice.c

@@ -1,17 +1,17 @@
 #include "alice.h"
 
 void matrix_init_board(void){
-    setPinOutput(A0);
-    setPinOutput(A1);
-    setPinOutput(A2);
+    setPinOutput(INDICATOR_PIN_0);
+    setPinOutput(INDICATOR_PIN_1);
+    setPinOutput(INDICATOR_PIN_2);
 }
 
 bool led_update_kb(led_t led_state) {
     bool runDefault = led_update_user(led_state);
     if (runDefault) {
-      writePin(A0, !led_state.num_lock);
-      writePin(A1, !led_state.caps_lock);
-      writePin(A2, !led_state.scroll_lock);
+      writePin(INDICATOR_PIN_0, !led_state.num_lock);
+      writePin(INDICATOR_PIN_1, !led_state.caps_lock);
+      writePin(INDICATOR_PIN_2, !led_state.scroll_lock);
     }
     return runDefault;
 }

keyboards/projectkb/alice/readme.md

@@ -7,7 +7,7 @@ Keyboard Maintainer: onefiftynine
 Hardware Supported: STM32F072CBT6  
 Make example for this keyboard (after setting up your build environment):
 
-    make projectkb/alice:default
+    make projectkb/alice/rev2:default
 
 If you are flashing this keyboard/pcb for the first time:
 

keyboards/projectkb/alice/config.h → keyboards/projectkb/alice/rev1/config.h

@@ -58,6 +58,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define WS2812_SPI SPID2
 #define WS2812_SPI_MOSI_PAL_MODE 0
 
+#define INDICATOR_PIN_0 A0
+#define INDICATOR_PIN_1 A1
+#define INDICATOR_PIN_2 A2
 
 // 2 bits for 4 layout options
 #define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2

keyboards/projectkb/alice/rev1/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = STM32F072
+
+# Build Options
+#   comment out to disable the options.
+#
+
+BOOTMAGIC_ENABLE = lite	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+CUSTOM_MATRIX = no # Custom matrix file
+BACKLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE = yes
+WS2812_DRIVER = spi
+
+
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

keyboards/projectkb/alice/rev2/config.h

@@ -0,0 +1,85 @@
+/*
+Copyright 2015 Jun Wako <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x0159
+#define PRODUCT_ID      0xA71C
+#define DEVICE_VER      0x0001
+#define MANUFACTURER ProjectKB
+#define PRODUCT Alice
+#define DESCRIPTION ProjectKB Alice
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+#define MATRIX_COL_PINS { B1, B0, A7, A1, A5, A4, A3, A10, B9, B8, B7, B6, B5, B4, B3, A15 }
+#define MATRIX_ROW_PINS { B2, B10, B11, A2, A0 }
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN           A6
+#define BACKLIGHT_PWM_DRIVER    PWMD3
+#define BACKLIGHT_PWM_CHANNEL   1
+#define BACKLIGHT_PAL_MODE      1
+#define BACKLIGHT_LEVELS 6
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define RGBLIGHT_ANIMATIONS
+#define RGB_DI_PIN B15
+#define RGBLED_NUM 14
+#define WS2812_SPI SPID2
+#define WS2812_SPI_MOSI_PAL_MODE 0
+
+#define INDICATOR_PIN_0 A9
+#define INDICATOR_PIN_1 A8
+#define INDICATOR_PIN_2 B12
+
+
+// 2 bits for 4 layout options
+#define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/projectkb/alice/rev2/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = STM32F072
+
+# Build Options
+#   comment out to disable the options.
+#
+
+BOOTMAGIC_ENABLE = lite	# Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+CUSTOM_MATRIX = no # Custom matrix file
+BACKLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE = yes
+WS2812_DRIVER = spi
+
+
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

keyboards/projectkb/alice/rules.mk

@@ -17,6 +17,7 @@ BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
 WS2812_DRIVER = spi
 
+DEFAULT_FOLDER = projectkb/alice/rev2
 
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE