New Keyboard: Quantrik Kyuu 65% Board

keyboards/quantrik/kyuu/config.h

@@ -0,0 +1,245 @@
+/*
+Copyright 2019 mechmerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Quantrik
+#define PRODUCT         kyuu
+#define DESCRIPTION     A 65% keyboard with blocker
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B6, B5, B4, D7, D6 }
+#define MATRIX_COL_PINS { F1, F4, F5, F6, F7, C7, C6, F0, B7, D0, D5, D3, D2, D1, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/quantrik/kyuu/info.json

@@ -0,0 +1,82 @@
+{
+    "keyboard_name": "Kyuu",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 16,
+    "height": 5,
+    "layouts": {
+      "LAYOUT": {
+        "key_count": 67,
+        "layout": [
+          {"label":"K00 (B6,F1)", "x":0, "y":0},
+          {"label":"K01 (B6,F4)", "x":1, "y":0},
+          {"label":"K02 (B6,F5)", "x":2, "y":0},
+          {"label":"K03 (B6,F6)", "x":3, "y":0},
+          {"label":"K04 (B6,F7)", "x":4, "y":0},
+          {"label":"K05 (B6,C7)", "x":5, "y":0},
+          {"label":"K06 (B6,C6)", "x":6, "y":0},
+          {"label":"K07 (B6,F0)", "x":7, "y":0},
+          {"label":"K08 (B6,B7)", "x":8, "y":0},
+          {"label":"K09 (B6,D0)", "x":9, "y":0},
+          {"label":"K0A (B6,D5)", "x":10, "y":0},
+          {"label":"K0B (B6,D3)", "x":11, "y":0},
+          {"label":"K0C (B6,D2)", "x":12, "y":0},
+          {"label":"K0D (B6,D1)", "x":13, "y":0},
+          {"label":"K0E (B6,B3)", "x":14, "y":0},
+          {"label":"K2E (B4,B3)", "x":15, "y":0},
+          {"label":"K10 (B5,F1)", "x":0, "y":1, "w":1.5},
+          {"label":"K11 (B5,F4)", "x":1.5, "y":1},
+          {"label":"K12 (B5,F5)", "x":2.5, "y":1},
+          {"label":"K13 (B5,F6)", "x":3.5, "y":1},
+          {"label":"K14 (B5,F7)", "x":4.5, "y":1},
+          {"label":"K15 (B5,C7)", "x":5.5, "y":1},
+          {"label":"K16 (B5,C6)", "x":6.5, "y":1},
+          {"label":"K17 (B5,F0)", "x":7.5, "y":1},
+          {"label":"K18 (B5,B7)", "x":8.5, "y":1},
+          {"label":"K19 (B5,D0)", "x":9.5, "y":1},
+          {"label":"K1A (B5,D5)", "x":10.5, "y":1},
+          {"label":"K1B (B5,D3)", "x":11.5, "y":1},
+          {"label":"K1C (B5,D2)", "x":12.5, "y":1},
+          {"label":"K1D (B5,D1)", "x":13.5, "y":1, "w":1.5},
+          {"label":"K1E (B5,B3)", "x":15, "y":1},
+          {"label":"K20 (B4,F1)", "x":0, "y":2, "w":1.75},
+          {"label":"K21 (B4,F4)", "x":1.75, "y":2},
+          {"label":"K22 (B4,F5)", "x":2.75, "y":2},
+          {"label":"K23 (B4,F6)", "x":3.75, "y":2},
+          {"label":"K24 (B4,F7)", "x":4.75, "y":2},
+          {"label":"K25 (B4,C7)", "x":5.75, "y":2},
+          {"label":"K26 (B4,C6)", "x":6.75, "y":2},
+          {"label":"K27 (B4,F0)", "x":7.75, "y":2},
+          {"label":"K28 (B4,B7)", "x":8.75, "y":2},
+          {"label":"K29 (B4,D0)", "x":9.75, "y":2},
+          {"label":"K2A (B4,D5)", "x":10.75, "y":2},
+          {"label":"K2B (B4,D3)", "x":11.75, "y":2},
+          {"label":"K2C (B4,D2)", "x":12.75, "y":2, "w":2.25},
+          {"label":"K2D (B4,D1)", "x":15, "y":2},
+          {"label":"K30 (D7,F1)", "x":0, "y":3, "w":2.25},
+          {"label":"K31 (D7,F4)", "x":2.25, "y":3},
+          {"label":"K32 (D7,F5)", "x":3.25, "y":3},
+          {"label":"K33 (D7,F6)", "x":4.25, "y":3},
+          {"label":"K34 (D7,F7)", "x":5.25, "y":3},
+          {"label":"K35 (D7,C7)", "x":6.25, "y":3},
+          {"label":"K36 (D7,C6)", "x":7.25, "y":3},
+          {"label":"K37 (D7,F0)", "x":8.25, "y":3},
+          {"label":"K38 (D7,B7)", "x":9.25, "y":3},
+          {"label":"K39 (D7,D0)", "x":10.25, "y":3},
+          {"label":"K3A (D7,D5)", "x":11.25, "y":3},
+          {"label":"K3B (D7,D3)", "x":12.25, "y":3, "w":1.75},
+          {"label":"K3C (D7,D2)", "x":14, "y":3},
+          {"label":"K3D (D7,D1)", "x":15, "y":3},
+          {"label":"K40 (D6,F1)", "x":0, "y":4, "w":1.5},
+          {"label":"K41 (D6,F4)", "x":1.5, "y":4},
+          {"label":"K42 (D6,F5)", "x":2.5, "y":4, "w":1.5},
+          {"label":"K46 (D6,C6)", "x":4, "y":4, "w":7},
+          {"label":"K4A (D6,D5)", "x":11, "y":4, "w":1.5},
+          {"label":"K4B (D6,D3)", "x":13, "y":4},
+          {"label":"K4C (D6,D2)", "x":14, "y":4},
+          {"label":"K4D (D6,D1)", "x":15, "y":4}
+        ]
+      }
+    }
+  }
+

keyboards/quantrik/kyuu/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here